Navigate through the Registry Editor (regedit) with the new address bar

The latest Windows 10 Preview build 14942 mainly focused on improving the system’s features, and bringing some new options to them. One of the nicest touches from the new build is definitely the introduction of an address bar for the Registry Editor (regedit).

Address bar in the Registry Editor will certainly make it easier for user to browse it, and organize. It looks similarly to the address bar in the File Explorer, as it shows the complete path of registry key you’re currently on. So, if you need to go to a complicated registry key path you’ve just found online, there’s no need to open each key individually, as you can past the whole path into the address bar.

“For our power users, we have added something special in this build – Registry Editor (regedit) now has an address bar! This enables you to easily see your current registry key path, and copy it if needed. You can also paste or type in paths, and pressing enter will take you to that location. You can use Alt + D to set focus to the address bar.”

Registry Editor is one of the longest-standing features of Windows, but it didn’t receive many changes through years. However, in Windows 10, Microsoft keeps improving it to provide the best possible experience for users in this sensitive tool.

As you probably know, the address bar in the Registry Editor is only available to Insiders running at least Windows 10 Preview build 14942. We expect Microsoft to release it to regular users with the next major update for Windows 10, the Redstone 2 update.

What do you think about the introduction of the address bar in the Registry Editor? Will it make browsing through registry keys easier? Tell us in the comments.

RELATED STORIES YOU NEED TO CHECK OUT:

Microsoft’s Surface Phone release delayed until late 2017 into 2018

By now, Microsoft fans are aware of the company’s upcoming hardware event on October 26 and certainly hope it will shed some light on some of the most oft-asked questions about Microsoft’s plans for its mobile releases and gaming console. But most importantly, users are giddy for a closer look at the new Surface all-in-one desktop PC.

The event is mostly about Windows 10 developments rather than certain hardware specifications but considering all the bustle created in the past few weeks by the many rumours, leaks and theories from well-reputed sources, it seems likely for the device to be shown off at the event. What’s unlikely is any news related to smartphones at the event.

The Surface Phone was rumoured to be released in 2017 at the earliest, as reported by several credible sources. But now, rumours have resurfaced and the release is expected be delayed until as far as 2018.

The foremost speculation that appeared stated that the phone is all set to be released in late 2016. A few months later, it became public that the handset would make its debut around the summer of 2017, somewhere around the rollout of Windows 10 Redstone 2 update. The Redmond-based company already made its intentions clear about the sales of further Lumia phones but nonetheless, hope for Windows 10 smartphones is not lost. On the other hand, the awaited Surface Phone is nowhere near ready for its red carpet appearance.

Mary Jo Foley recently confirmed this news and crushed all hopes of users getting a Surface Phone in their hands any time soon, further adding that “it will likely be late 2017 or maybe even not until 2018” before the Surface Phone is launched.

2018 is a long time to wait for Microsoft’s Surface smartphone. Even if the release is not delayed any further, user’s hopes would have peaked by then considering the extended wait. Given that it has been over a year since company’s recent flagships, the Lumia 950 and 950 XL, were unveiled, their prices have significantly tumbled which points towards the end of the Lumia line.

Focusing on what is actually going to be featured in the event, gaming consoles and their recent developments as well as devices from Microsoft’s OEM partners will  be highlighted. As far as smartphones are concerned, we are going to see some but unfortunately, they won’t be Microsoft’s.

Has the extended delay for the Surface Phone killed your excitement? Or being the extreme Windows 10 fanatic as some of us are, are you still hyped about the Surface Phone release?

VLC now available to download on Windows Store for Xbox One

Not too long ago, we anticipated the expected arrival of VLC for Xbox One and the day has finally come: Microsoft launched the app today on Windows Store for Xbox One owners. The open source media app made its way from Windows 10 desktop PCs to mobile and now to the popular gaming console.

As the VLC Media Player is a Universal Windows App, its features are akin to the Windows 10 app for desktop or mobile. Though the app is up for download now, a developer of the app took to Reddit to inform the users about the beta test of the app which is still in progress. Even though it isn’t a finished product, they felt it was “important enough to have a version out”. Having said this, developers are opting to be fully cooperative and accept constructive criticism with open arms and are asking users to report any issues and bugs they might face on their bug tracker.

VLC still lacks support for DVD and Blu-Ray though it fully supports a wide-range of image and video file types. Also, it is essential for users to remember that this isn’t the full-fledged VLC Win32 app, so we would advise users to not get their expectation a little too high.

As for the UWP, VLC includes:

  • video player

  • audio player

  • audio management

  • MKV playback

  • FLAC playback

  • subtitles downloader

  • subtitles

  • audio

Apart from downloading the app from Windows Store, users can also visit the link from their browser Microsoft Edge to get it.

Microsoft seeks to “transform and modernize education” by collaborating with edX for new online course offerings

Earlier this year, Microsoft shared that they wanted to help “transform and modernized education”. What does transforming schools actually mean? To Microsoft, it means educating from the very top. That includes administrators, principals, and school leaders that directly influence the development of lessons and learning. The tech giant intends to develop classes specifically for these individuals to put learning first and now those previously promised classes are finally available. Announced through the Microsoft in Education blog, Microsoft revealed the release of five new leadership courses on the edX platform.

For those that may not know, edX is a massive online course provider that was created in May 2012 by a collaboration of Massachusetts Institute of Technology and the prestigious Harvard University. Almost anyone can register and take part in self-paced classes developed by universities and professors delivered conveniently online with a wide variety of topics.

In this case, Microsoft’s courses are focused towards providing up to date references and technological knowledge to administrators for K-12 schools. The classes were developed by  the Massachusetts Institute of Technology, University of Michigan, and the University of Queensland.

Here’s a detailed look at each one:

  • Launching Innovation in School
    Become a change leader and take the first step in launching instructional improvement in K-12 education to improve teaching and learning.

    Course led by Massachusetts Institute of Technology (MIT)
    Starts January 17, 2017
    Duration: 6 weeks
    Course Faculty: Justin Reich, Executive Director, MIT Teaching Systems Lab; and Peter Senge, Senior Lecturer in Leadership and Sustainability, MIT Sloan School of Management
    Learn more and register now

  • Leading Ambitious Teaching and Learning
    Learn why ambitious teaching and learning may be the key to global educational improvement and how to put it into practice.

    Course led by The University of Michigan
    Starts January 24, 2017
    Duration: 4 weeks
    Course Faculty: Elizabeth Moje, Dean, School of Education; and Deborah Ball, Professor, School of Education; Nell Duke, Professor, School of Education; Liz Kolb, Clinical Assistant Professor, School of Education; Donald J. Peurach, Associate Professor, School of Education; Gretchen Spreitzer, Professor, Ross School of Business
    Learn more and register now

  • Deep Learning Through Transformative Pedagogy
    Learn powerful teaching strategies and effective learning activities to enhance deep learning

    Course led by The University of Queensland
    Starts February 27, 2017
    Duration: 5 weeks
    Course Faculty:  Merrilyn Goos, Head of the School of Education; Pankaj Sah, Director of the Queensland Brain Institute; Robyn Gillies, Professor of Education; Annemaree Carroll, Professor of Education; Melissa Cain, School of Education; Katherine McLay, School of Education
    Learn more and register now

  • Leading Change: Go Beyond Gamification with Gameful Learning
    Learn the tools to support gameful learning environments that foster personalized, engaged learning

    Course led by The University of Michigan
    Starts March 6, 2017
    Duration: 6-8 weeks
    Course Faculty: Barry Fishman, Professor of Information, School of Information and Professor of Education, School of Education; and Rachel Niemer, Director of the Gameful Learning Lab, Office of Academic Innovation
    Learn more and register now

  • Design Thinking for Leading and Learning in K-12 Education
    A hands-on course for education leaders to learn about design thinking and explore how it can transform classroom learning and school communities.

    Course led by Massachusetts Institute of Technology (MIT)
    Starts March 21, 2017
    Duration: 6 weeks
    Course Faculty: Justin Reich, Executive Director Teaching Systems Lab
    Learn more and register now

Like other edX classes, registration is free and available to everyone 24/7. The Microsoft in Education edX classes are already available for registration and will be underway in January 2017.

Windows 10 Build 14942 causes Edge crashes, installation problems, and more

Microsoft pushed the new Windows 10 Preview build 14942 to Insiders on the Fast ring. The new release brought a couple of new features, some system improvements, and updated a few apps.

According to Microsoft, there aren’t many known issues in this build, as the company recognizes it as quite stable. However, that’s the case in reality, because we’ve managed to find numerous complaints from insiders who installed Windows 10 Preview build 14942 on their computers.

Judging by the number of reports, this build has the potential to become one the most troublesome Redstone 2Preview build so far. So, let’s see what has been bothering users in build 14942, and if there’s a way to solve any of those problems.

Windows 10 Preview build 14942 reported issues

As (pretty much) always, we start off our report with installation fails. Numerous users reported on the Community forums that they’re unable to download or install Windows 10 Preview build 14942, for one reason, or another. However, it appears that installation gets stuck for most users. Here’s what some of them say:

  • “im installing new build on a laptop and surface pro 4.
    both been running build14936.
    but both jam up at 80% installing updates.
    I have rebooted back to earlier build and restarted download to install but alas I get same issue at 80%’
    any one else having an issue??
    have retried and both stick at 80%”
  • “Hi when I tried to install windows 10 build 14942 it gets stuck at 81%, I’m not sure what is getting stuck or what’s it installing but I left it on all night and it was still 81% by morning.
    Could I have help please?”

According to replies from other users, installation stuck is caused by third-party antivirus programs, mostly Kaspersky, Norton, and Malwarebytes. So, if you’re experiencing this kind of problem, try removing your antivirus program, and initiate the installation process once again. Remember to remove it completely, because just disabling won’t be of any help.

Even those Insiders who had no problems installing the latest build have encountered some issues of their own. Nevertheless, none of these issues is a critical problem that prevents users from using the system, and testing the build, but each flaw is quite annoying, and people want it solved.

One Insider reported on the Forums that the Task Manager window resets each time he re-opens it. Here’s what he said about the problem:

“I open Task Manager and resize it to show full details. But when I close the Task Manager and re-open it, the window size returns to its first-open size as if I had completed installing Windows 10 a second ago.”

This user managed to find the solution himself, by performing the SFC scan, which is now fixed in build 14942. However, this solution doesn’t seem to work for everyone, so we cannot threat it as a confirmed workaround.

Next, a few users are unable to wake up their computers from sleep normally. Reportedly, when they try to wake their PC up by simply moving the mouse cursor, it automatically restarts. Here’s what one of them said on the forums:

“With Build 14942, when I try to wake my computer from Sleep by moving the mouse, it promptly reboots, doesn’t get to the logon screen, and reboots again”

If you’re encountering this problem, as well, we recommend checking out our article about waking up problems in Windows 10. But since nobody said anything about a potential solution, we cannot guarantee our article will surely help.

The same user reported another problem on the Forums. This time, he had problems with the Start Button and Notifications icon, which failed to work normally.

“In Build 14942, both the Start Button and the Notification Icon fail to work until about 2 minutes after the boot process has completed.”

Unfortunately, no one had a proper solution for this problem. Once again, we can recommend you our article about Start Menu problems in Windows 10, but cannot guarantee if any of the offered solutions would work in your case.

One of the most common issues in the build is the problem with Microsoft Edge. Apparently, Windows 10’s default browser crashes on launching, which some users find extremely annoying.

“I just upgraded 2 PC’s to Windows 10 build 14942.  Every time I try to open Edge it crashes.  Both of my PC’s have the Edge crashing problem.  I’m using Pale Moon to write this.  Any suggestions to fix this?  Thanks!”

Luckily, some Insiders managed to find a solution for this issue. Namely, running one command in PowerShell should resolve the problem. So, if Microsoft Edge crashes on your computer, as well, just open an elevated PowerShell, and run the following command:

“Get-ChildItem ‘HKCU:\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\AppContainer\Storage\microsoft.microsoftedge_8wekyb3d8bbwe\Children’ | foreach {Remove-Item $_.pspath -Recurse}”

Issues with the Settings app have become a common sight in Windows 10 Preview builds. Even when Microsoft fixes a certain issue, another one pops up. This time, one Insider reported on the forums that he’s unable to see title labels in the System>About section of the Settings app.

“After installing the latest build I looked over the items in Settings and noticed that under System then select About there are “switches” without any title labels.”

build 14942 issues settings

Unfortunately, no one had a proper solution for this problem on the forums.

That’s about it for our article about reported problems in Windows 10 Preview build 14942. As you can see, there are a lot of ‘smaller’ issues that are still bothering Windows Insiders. Hopefully, Microsoft will address at least some of them in the future releases, just like it did with some of the previous problems.

Of course, these probably aren’t all problems in Windows 10 Preview build 14942, so if you’ve encountered some issue we didn’t mention here, feel free to let us know in the comments.

RELATED STORIES YOU NEED TO CHECK OUT:

Skype for Linux updated to version 1.10, gains video calling support

The Skype team has released today another update to its new Skype for Linux client that it introduced earlier in July. The latest version 1.10 finally brings supports for video calls on Linux, though there is a catch as Skype video calls are only available on Skype for Linux users for now. The team explained why in a new post on Skype community (via Neowin):

The team has been working hard on bringing video calls on Linux and today we have the experimental version ready for you. We are not quite there. The 1-on-1 video calls work only between Skype for Linux Alpha clients for now. Despite the early phase, we’d like to ask you, the Linux community, to help us with testing. Please let us know how the video works for you.

Additionally, the Skype team also explained that it would disable older versions of Skype for Linux following this latest release, and those of you who are still running versions 1.1 to 1.6 will soon be asked to download the new bits. If you didn’t test the app yet, you could do so by downloading the DEB package or the RPM package.

Where is Microsoft headed in Windows 10 speech recognition?

PCWorld writer Mark Hachman pointed out a notable issue with Windows over the weekend. For all that Microsoft champions about being able to speak to Cortana, or translate your spoken words with Skype, Windows’ speech recognition remains underwhelming.

Microsoft has long believed in new forms of input to interact with PCs and devices. Windows, for the most part, remains a mouse- and keyboard-centric experience, but now you can also draw on web pages, dictate an email to Cortana, and unlock your device by looking at it. And as we recently reported, Microsoft believes a combination of your voice and hand gestures will eventually kill off the keyboard altogether.

Windows Ink
Windows Ink

So this raises the question that Mark Hachman gets at with his PCWorld article. Why isn’t speech recognition and dictation a bigger feature within Windows?

Hachman points out how this could be because ten years ago Microsoft did try to make voice dictation a significant feature in Windows Vista, and the effort didn’t go so well. Microsoft product manager Shanen Boettcher had a cringeworthy demonstration of a glitchy voice dictation system that got very little correct on the first try, or at all.

But times and the processing power of our PC’s have changed. In fact, Microsoft researchers recently produced the lowest-ever error rate in speech recognition thanks to machine learning. However, again as Hachman points out, Windows Speech Recognition is still powered by Microsoft Speech Recognizer 8.0, which has been around, and unchanged, since Windows Vista.

Hachman also tested Windows Speech Recognition and got an accuracy rate of 93.6%. He writes,

That’s pretty bad on paper, and somewhat behind the dedicated software I’m trying. Windows also had an odd habit of interjecting the word “comma” when I was dictating the punctuation mark. The speech community seems split on whether relatively minor mistakes like this are significant.

He notes though this was without any training of the software, and he says Microsoft employees reported that with proper training, Windows Speech Recognition can be up to 99% accurate.

Speech recognition is limited to dictating commands to Cortana, but not dictating entire documents.
Speech recognition is limited to dictating commands to Cortana, but not dictating entire documents.

Windows Speech Recognition seems overdue for a reboot. Just like Microsoft has introduced touch and ink capabilities throughout Windows and apps, it is probably time for your voice to be a useful input throughout the operating system. Hachman notes that one part of the problem in rolling out modern voice recognition to apps like Office is that the most recent voice recognition efforts are siloed away with the Cortana and Bing team.

Hachman writes:

I think it’s pretty obvious that the pieces of the puzzle are there, technically. If there’s any obstacle, it might be organizational: As of Thursday, Microsoft’s Office apps were spun out into their own group, away from Cortana and Bing.

But for all that Nadella has done to break down barriers between product teams, it seems like this challenge is right up his alley: to create a vision for Windows and Microsoft apps, like Office, tapping into the machine learning cloud powered efforts of Bing and Cortana. For their part, Microsoft did respond to Hachman’s article, saying:

We see value in conversations across a range of devices and experiences. We’re just at the beginning of what we believe is possible and certainly see lots of opportunity to connect Cortana and conversations into a number of productivity scenarios. Today, Cortana integrates with Office 365 for glance-able information about upcoming meetings, along with flight and package tracking, and Bing is also providing intelligent insights directly in Office. We will continue to invest heavily here.

So who knows, maybe this is something that Insiders might start seeing more inklings of in future Redstone 2 builds, or maybe even in the same ballpark of what is talked about at the upcoming October event. It would be fitting as September saw Apple announcing Siri on MacOS and Google bring Google Now into every room of your home. For all the attention other forms of input get with Windows, move universal voice recognition certainly seems long overdue.

Microsoft offers more details on new patch rollup scheme for Windows 7, 8.x, Server

In August, just a little over two weeks after the Windows 10 Anniversary Update launched, Microsoft announced Windows 7, 8.1, Server 2008, and Server 2012 will be moving to a new serving model.

Starting this month, updates for these older versions of Windows and Windows Server will move to a monthly servicing model with a single update. The bigger change in this new model is that previous months’ updates will be rolled up into each new monthly update. In other words, Windows 7 and Windows 8.1 updates are getting the Windows 10 cumulative update treatment, also known as part of what Microsoft describes as Windows-as-a-Service.

Microsoft's monthly update roadmap.
Microsoft’s monthly update roadmap.

Just before the weekend, Microsoft posted the details on TechNet of how this new servicing model will work, via ZDNet.com. The post includes a roadmap of how this process will work through February of next year, at which point the whole process should be fully cumulative like Windows 10.

Microsoft also thoroughly explained the three monthly updates which will be available each month. They include a security-only quality update, a security monthly quality rollup, and a preview of the monthly quality rollup. Microsoft specifically describes each update with the following:

A security-only quality update

  • A single update containing all new security fixes for that month
  • This will be published only to Windows Server Update Services (WSUS), where it can be consumed by other tools like ConfigMgr, and the Windows Update Catalog, where it can be downloaded for use with other tools or processes. You won’t see this package offered to PCs that talk to Windows Update.
  • This will be published to WSUS using the “Security Updates” classification, with the severity set to the highest level of any of the security fixes included in the update.
  • This (like all updates) will have a unique KB number.
  • This security-only update will be released on Update Tuesday (commonly referred to as “Patch Tuesday”), the second Tuesday of the month. (This is also referred to as a “B week” update.)

A security monthly quality rollup

  • A single update containing all new security fixes for that month (the same ones included in the security-only update released at the same time), as well as fixes from all previous monthly rollups. This can also be called the “monthly rollup.”
  • This will be published to Windows Update (where all consumer PCs will install it), WSUS, and the Windows Update Catalog. The initial monthly rollup released in October will only have new security updates from October, as well as the non-security updates from September.
  • This will be published to WSUS using the “Security Updates” classification. Since this monthly rollup will contain the same new security fixes as the security-only update, it will have the same severity as the security-only update for that month.
  • With WSUS, you can enable support for “express installation files” to ensure that client PCs only download the pieces of a particular monthly rollup that they haven’t already installed, to minimize the network impact.
  • This (like all updates) will have a unique KB number.
  • This monthly rollup will be released on Update Tuesday (also known as “Patch Tuesday), the second Tuesday of the month. (This is also referred to as a “B week” update.)

A preview of the monthly quality rollup

  • An additional monthly rollup containing a preview of new non-security fixes that will be included in the next monthly rollup, as well as fixes from all previous monthly rollup. This can also be called the “preview rollup.”
  • This preview rollup will be released on the third Tuesday of the month (also referred to as the “C week”).
  • This will be published to WSUS using the “Updates” classification as an optional update. It will also be available via Windows Update (where all consumer PCs will install it) and on the Windows Update Catalog.
  • With WSUS, you can enable support for “express installation files” to ensure that client PCs only download the pieces of a particular monthly rollup that they haven’t already installed, to minimize the network impact.
  • Starting in early 2017 and continuing for several months, older fixes will also be added to the preview rollup, so it will eventually become fully cumulative; installing the latest monthly rollup will then get your PC completely up to date.
  • This (like all updates) will have a unique KB number.

Internet Explorer and the .NET Framework will also be moving to this monthly update model. Hopefully, this model will simplify support for older version of Windows, reduce fragmentation of operating systems, and produce more reliable updates. But understandably, some are concerned.

Windows 10 BSOD QR Code
Kindle Paperwhite owners reported BSOD errors in Windows 10 after the Anniversary Update

It probably was not great timing to announced Windows 7 and Windows 8.1 are getting the Windows 10 cumulative update treatment, as the Windows 10 Anniversary Update caused a variety of headaches for users. And as many businesses rely on legacy versions of Windows, those headaches could get costly. It won’t be long before we know how this all plays out for Microsoft and the hundreds of millions using legacy versions of Windows, since the “B” week Patch Tuesday is tomorrow.

It’s a big week for Xbox with Gears of War 4, Battlefield 1 early access releases, lots more

If you have a hard time following all the new game releases on Microsoft’s Xbox One, the folks over at Xbox Wire have started a new weekly series of posts called “Next week on Xbox” to highlight the most important new titles to enjoy on your console. With several blockbuster releases, this week is expected to be particularly exciting for Xbox One owners. Let’s dive into the details below.

New AAA games

Gears of War 4 – Tuesday, October 11

Gears of War 4, the critically-acclaimed third person shooter developed by The Coalition for both the Xbox One and Windows 10 PCs, will become available worldwide tomorrow, October 11 (those of you who bought the game’s Ultimate Edition have been able to enjoy early access since October 7). The latest Gears opus opens a new story arc which takes 25 years after the end of the previous trilogy, and new hero JD Fenix (Marcus’ son) and his friends will embark on a new action-packed adventure featuring more diverse environments, deadly enemies and more. If you haven’t done it yet, we invite you to read our full review over here.

Battlefield 1 – Thursday, October 13 (With EA Access)

EA Access subscribers will be able to try the latest first person shooter from EA’s Dice Studios starting October 13 (others will have to wait for the worldwide release of the game on October 21). In some sorts, Battlefield 1 is a throwback to the origins of the franchise as the game is set during World War 1. Following the game’s open beta back in August, we wrote that the game could be one of the best Battlefield games yet.

WWE 2K17 – Tuesday, October 11

The professional wrestling video game and follow up to WWE 2K16 will be released on the same day than Gears of War 4. “WWE 2K17 features stunning graphics, ultra-authentic gameplay and a massive roster of WWE and NXT’s popular Superstars and Legends,” shared the Xbox team.

New old game bundles + Tomb Raider DLCs

Metal Gear Solid V: The Definitive Experience

Metal Gear Solid V: The Definitive Experience is a new bundle including the critically-acclaimed Metal Gear Solid V: The Phantom Pain plus its prologue Ground Zeroes and all their DLC content. In addition, the bundle will include $20 worth of in-game currency.

Payday 2: The Big Score

This new package includes Payday 2 Crimewave Edition, The Big Score DLC bundle plus additional content including heists, weapons, characters, masks and more.

Rise of the Tomb Raider: Season Pass DLC – Tuesday, October 11

As we previously reported some weeks ago, Rise of the Tomb Raider is getting new content to celebrate the franchise’s 20th anniversary. Those of you who purchased the game’s Season Pass will get the “Blood Ties” DLC, a “Lara’s Nightmare” mode, a new online Co-Op Endurance mode and an “Ultimate Survivor” difficulty.

Other games to be released this week

Duke Nukem 3D: 20th Anniversary World Tour (available Wednesday, October 12) is a remaster of the four classic Duke Nukem 3D episodes plus a new episode created from the game’s original designers.

Three other games will also be released on October 12: Castle invasion: Throne Out, racing game Mantis Burn Racing and shoot-em-up Blue Rider. Lastly, two other titles will be released on Friday, October 14: narrative adventure game Manual Samuel and 3D adventure/puzzle game Death God University. Let us know in the comments which of these games you’re most excited about!

Registration now open for Microsoft Envision conference, coming to Los Angeles in early 2017

Back in April, Microsoft hosted their Envision Conference in New Orleans. Designed for business leaders, the conference is centered on the challenges companies face in a technological world, and how technology impact businesses. If you missed the last conference, registration for the 2017 edition of the event in Los Angles is now open.

As is expected, Key speakers at the 2017 Microsoft Envision conference include Microsoft CEO Satya Nadella, Microsoft President, and Chief Legal Officer Brad Smith. The three-day event will also feature a Digital Transformation keynote, Fireside chats with top business and industry leaders, an Innovation chat, and for those who are in attendance, chances to network.

Microsoft Envision is scheduled for February 28, 2017, to March 2nd, 2017. Previous themes from last year’s conference included the digital transformation in business. So, if you’re a business leader interested in attending, be sure to head over to this official Microsoft page now to secure your seat at the event before registration closes.

Windows 10 build 14942 increases number of processes in Task Manager

Windows 10 build 14942 is now available for download, and brings a series of interesting features to Microsoft’s latest OS. This build is the most generous update in terms of new features, as previous builds focused mainly on fixing bugs and improving the overall computer performance.

There is one new feature that may surprise your at first, or even intrigue you. On PCs with 3.5 GB+ of RAM, service hosts are now split into separate processes, resulting in an increased number of processes in Task Manager. The good news is that there’s nothing to worry about, as this feature brings improved reliability and security.

Microsoft explains that as the number of preinstalled services grew, they began to get grouped into processes known as service hosts with Windows 2000. The recommended RAM for PC’s for this version was 256 MB, while the minimum RAM was 64MB. Over the years, the available memory increased, and as a result, the memory-saving advantage of service hosts has diminished.

By ungrouping services on 3.5+ GB of RAM PCs, Windows now offers increased reliability, transparency, security and helps IT admins detect the source of problems faster.

1. Increase reliability: When one service in a service host fails, all services in the service host fail. In other words, the service host process is terminated resulting in termination of all running services within that process. Individual service failure actions are then run.

2. Increase transparency: Task Manager will now give you a better view into what is going on behind the scenes. You can now see how much CPU, Memory, Disk & Network individual services are consuming. […]

3. Increase transparency: Task Manager will now give you a better view into what is going on behind the scenes. You can now see how much CPU, Memory, Disk & Network individual services are consuming.

4. Increase security: Process isolation and individual permission sets for services will increase security.

However, critical system services that require system restarts, as well as several select service hosts, won’t be affected by this change and will remain grouped.

Service host separation may cause Xbox sign-ins to fail. If this happens, use this workaround:

  • Go to Command Prompt and run the following, or edit the Registry accordingly: REG ADD HKLM\SYSTEM\CurrentControlSet\Services\XblAuthManager /v SvcHostSplitDisable /t REG_DWORD /d 1 /f
  • Reboot the system, which allows XblAuthManager to share a service host process with Windows Update and BITS.

RELATED STORIES YOU NEED TO CHECK OUT:

Windows 10 news recap: Paint is getting overhauled, Registry Editor navigation gets easier and more

Welcome back to our weekly “Windows 10 news recap” series where we go over the top stories of the past week in the world of Microsoft’s latest operating system. Let’s get started.

Registry Editor (regedit) in Windows 10 build 14942 now has an address bar

The Registry Editor, also known as regedit, is one of the core areas of Windows for system administrators, allowing ultimate control over the operating system. Up until now, it had only received minor updates with no major features being added. Now, Microsoft has added an address bar so that it is much quicker to locate the registry entry that is needed.

A gif, provided by Microsoft’s Jen, shows how it all works:

registry-editor
Using the Address Bar in regedit

Windows 10 Build 14942 might increase RAM usage for some users

From build 14942, Microsoft is changing the way in which one of its service management practices works. Normally, in Task Manager, it would display something along the lines of “Service Host,” a somewhat cryptic task as it doesn’t really show what task it is for. Going forward, for machines with 3.5GB RAM or more, these tasks will no longer be grouped under the Service Host task and instead separated out, which will reduce crashes, as one task will not affect another.

task-manager-windows-10-svchost
Task Manager Service Host

Unfortunately, this will marginally increase RAM usage on some machines.

Here’s what Microsoft’s new Paint app for Windows 10 looks like

One of Windows’ most classic programs, Paint, is finally receiving a somewhat long-overdue upgrade. Microsoft appears to be completely reworking how Paint works and incorporating an unexpected feature – 3D objects, as well as adding support for inking. This upgrade will also make Paint a Universal Windows App, therefore it is possible we might see parts of it make its way to Windows 10 Mobile.

Here’s a video showing off the improved experience:

Latest Insider Fast Ring build lets you uninstall certain Windows 10 stock apps

Windows 10 brings with it a variety of stock apps, such as the Xbox app. For some, however, these apps aren’t necessary. As an example, it isn’t exactly ideal to have the Xbox app on a work PC or for a home PC where users aren’t necessarily gamers. To those who wish to uninstall some of the stock apps, Microsoft is beginning to make this possible in the latest Fast Ring Insider build, which will permit uninstalling some apps.

uninstall%20windows%20apps%20mail
Uninstall stock apps

Here’s the build that released over the past week:

Khan Academy to remove its Windows app this month due to “small user base”

Khan Academy has been struggling with their funds recently, and it was just a matter of time before they would start cutting costs. One of the things that have to go is the Windows 8 app. It will be available for a few days more, and will continue to work if you download it now, but if you install it or don’t download it at all, you will be forced to use the website.

The post announcing this change was posted a few days ago and reveals that the app will be removed because of the small user base. There are very few people that would prefer an underpowered and outdated app over the website so this isn’t really surprising. The post follows:

Heads up that the Khan Academy app for Windows devices will be removed from the app store in early October.  If you have the app downloaded to your device, you’ll still be able to use it after this happens, but if you delete it you won’t be able to add it again.

We don’t currently have the resources to guarantee a high quality experience in this product, especially given its small user base, so the decision was made to sunset the app rather than extend a promise of a high-quality learning experience that couldn’t actually be delivered on.

That said, if you have any additional thoughts or reactions on this, please let us know here.

The app still has huge potential as a universal Windows 10 app and could be updated with features like Windows Ink and other productivity-oriented features. Unfortunately, this doesn’t seem to be the case.

A lot of students use Microsoft Surface’s nowadays and that could be an opportunity to update and maintain the app with the focus towards those people. Most Khan Academy users didn’t even know there was an app. Some mistakes made by the team and the low demand, unfortunately, resulted in the death of yet another app.

Thanks to Roger for the tip!

Khan Academy
Khan Academy
Developer:
Khan Academy
Price:
Free

Easy Fix: Windows 10/11 cannot create the file error

Every day we access and create all sorts of different files, but sometimes certain issues with files can appear. Users reported that they are getting Cannot create the file error message on Windows 10, and today we’re going to show you how to fix it.

How to fix ‘Cannot create the file’ errors

Fix – “Cannot create the file” right-click the folder

Solution 1 – Change your registry

According to users, this error occurs when you don’t have the necessary permissions over the Temporary Internet Files folder stored on a server. Due to this problem, you won’t be able to open or save an email attachment, but you should be able to fix this problem by making certain changes to your registry.

Modifying the registry can be potentially dangerous if you don’t do it properly, therefore we recommend that you use extra caution and create a backup of your registry before making any changes. To edit your registry, do the following:

  1. Press Windows Key + R and enter regedit. Click OK or press Enter.
    cannot-create-the-file-regedit-1
  2. When Registry Editor opens, in the left pane navigate to HKEY_CURRENT_USER\Software\Microsoft\Office\14.0OutlookSecurity.
  3. In the right pane double click OutlookSecureTempFolder.
  4. In the Value Data field enter C:\temp0 and then click OK.
  5. After making these changes, close Registry Editor and restart your PC.

After your PC restarts, check if the problem is resolved. This solution should work for all modern versions of Outlook, although the path in Step 2 might change a bit depending on the version that you’re using.

An alternative way to fix this problem is to create a new registry key for OutlookSecureTempFolder. You can do that by following these steps:

  1. Open Registry Editor and navigate to HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\OutlookSecurity key in the left pane.
  2. Locate OutlookSecureTempFolder in the right pane and rename it to OutlookSecureTempFolder__Old.
  3. In the right pane, right click the empty space and choose New > String Value. Enter OutlookSecureTempFolder as the name of the new string.
    cannot-create-the-file-regedit-2
  4. Double click OutlookSecureTempFolder and change the Value Data to %USERPROFILE%\Documents\Outlook\TempFiles. Click OK.
  5. Now go to %USERPROFILE%\Documents in and create the OutlookTempFiles folder there.
  6. Restart your PC, start Outlook again and check if the problem is resolved.

Solution 2 – Empty Outlook Secure Temp folder

This problem can affect almost any version of Outlook, and in order to fix this problem, you need to remove all files from Outlook Secure Temp folder. You can do that by following these steps:

  1. Open Registry Editor and navigate to HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\OutlookSecurity key in the left pane. This path might be a bit different depending on the version of Outlook that you’re using.
  2. Open OutlookSecureTempFolder in the right pane to see its properties.
  3. Copy the file location from Value Data field and paste it into File Explorer’s address bar.
  4. After you open that folder, delete all files from it.

If checking the registry and removing these files is too complicated for you, you can also use tools such as OutlookTempCleaner and OutlookTools to quickly and easily empty Outlook Secure Temp folder.

Fix – “Cannot create the file” when that file already exists

Solution 1 – Check your syntax

Users reported this error while trying to create a link using the mklink command. This command can be quite useful, but in order to use it, you need to be sure that your syntax is correct. If your syntax is wrong, you’ll most likely get Cannot create the file error message. If you’re using mklink command, be sure to use the following syntax: mklink [options] [Link] [Target].

Solution 2 – Move the files from link to the target folder

As we already explained in our previous solution, mklink syntax should look like this: mklink [options] [Link] [Target]. To fix this problem you need to move the files from the Link directory to the Target directory manually.

After that, delete the Link folder and try to run the command again. Bear in mind that deleting certain directories can lead to problems, therefore it might be better that you just rename them.

Solution 3 – Delete Tvsuinstaller directory

Users reported this error while trying to install system updates, and apparently you can fix this problem on Lenovo laptops by removing one directory. Simply go to C:\ProgramData\Lenovo and delete the Tvsuinstaller folder. After deleting it, try to perform system update again.

Cannot create the file error usually occurs when you try to view Outlook attachments, or if you’re making links on your PC, but as you can see, this problem can be easily solved by using one of our solutions.

READ ALSO:

Skype and Michelle Obama to celebrate “Day of the Girl” with global Skype call

In celebration of “Day of the Girl,” a day marked by the United Nations to highlight the inequality of education for girls, Skype and Michelle Obama will be hosting a global Skype call, as announced on the Skype Blog.

The call will be jointly hosted by both Skype TX and Glamour Magazine, where the call will be joined by First Lady Michelle Obama, in conjunction with Glamour Magazine’s Editor-in-Chief, Cindi Leive. The topic of discussion will be around the inequality of girls’ education across the world.

Actress and activist Yara Shahidi will also be joining from the Newseum, Washington D.C, with a group of 150 school-aged girls from groups such as The Girl Project and Let Girls Learn. Girls from several countries, such as Tanzania, Peru, Jordan and the UK will be on-board with the call, in order to “share the experiences and challenges they face in obtaining quality education.”

It will start on Tuesday, October 11, at 11:15am EST. To watch the livestream, follow Skype’s Facebook and Twitter social channels, as well as keep your eye on WinBeta!

Windows 10 Build 14942 might increase RAM usage for some users

The latest Windows 10 build (Build 14942) that Microsoft has pushed out to Windows Insiders contains several improvements, but also brings an end to the practice of grouping Service Hosts.

If you’re not familiar with svchost.exe that you’ve always seen running on your Task Manager as a Windows process, read on.

Microsoft started to group service host processes (svchost.exe) starting with Windows 2000 to conserve available memory as the number of pre-installed services grew. The recommended RAM for PCs for Windows 2000 was 256MB (yes, that’s even less than the cheapest smartphone out there) and as the available memory increased dramatically over the years, there wasn’t any practical memory-saving advantage of service hosts.

With the latest build, Microsoft is ending the practice on systems with more than 3.5GB of RAM and each service will now run as a separate process. The company, in a blog post, has mentioned that this change will also increase RAM usage somewhat and there might be a negative impact on devices with only 4GB of memory.

task-manager-windows-10-svchost
Task Manager Service Host

Disabling the grouping of Service Hosts will improve reliability since one service crashing would not take down others with it. Also, process isolation and individual permission sets for services will increase security.

For administrators, this change would also increase transparency and the Task Manager will now give you a better view into what is going on behind the scenes. On machines with enough memory, all services will be listed in separate processes and you would be able to see how much CPU, Memory, Disk, and Network individual services are consuming.

A lot of mid-range consumer devices, including Surface, pack in 4GB of RAM, and might experience increased RAM usage. We’re not sure of the impact yet, but considering this is on an Insider build, Microsoft will be closely watching any performance hits and take appropriate steps to counter any negative effects.

How to undo registry changes in Windows 10

Sometimes you can encounter problems after changing a specific are from the registers, even if it is about a key or the entire hive and you do not know how to solve this problem.

Windows 10 has a useful feature which allows you to create backups at a specific moment to which you can return in any moment. In other words, you can restore your computer to the settings of a certain time in the past. This is useful because you can set your configuration to a form that did not exist those errors without the need to revert to the default factory settings and in that case, you will have to reinstall all your programs and drivers. So, sometimes, you have to create this backup to have more safety for your system.

Method 1 – Restore your registry using registry back-up

How to create a registry back-up in Windows 10

  1. Type regedit in the Windows search bar and select it from the list of results.8
  2. This will open the Registry Editor dialog box. It is the place where you can modify, delete, change and back-up all the registers.
  3. Now is your decision what you want to save. You can back-up the entire registry, or you can back-up only a part, if you know where you will be working. We recommend you to back-up the whole registry because in this way you are sure that everything works in this state and you will not have to create every time a copy for each edited register.
  4. To back-up the whole registry right-click on the Computer section from the left table of the Registry Editor interface.
  5. Select the Export feature. This will create a .reg file where you have all the registry from that moment.9
  6. Save the file in a known location (like Desktop or Documents) to be sure you can find it easily.
  7. Check the place where you saved the registry. If the file is there, we can continue to the next stage, otherwise read more carefully the steps from above and try again.

How to restore your Windows registry

  1. Locate the back-up file of your registry. If you have problems of finding it, check in the Documents folder (the folder where is saved automatically) for a .reg. The icon looks similar with a blue broken Rubik’s cube.
  2. Double-click on the .reg file to open it. Depending on the configuration of your operating system, you may receive a dialog-box where you have to allow the application to make changes to your computer. Click on the Yes button in this case to start the restore process.
  3. You will receive an attention dialog-box where you are informed that the following actions may cause your components to not work properly. If this file is created by yourself, then it will be safe to run the process, otherwise make sure that the source of the file is safe.
  4. Click on the Yes.
  5. Assuming that your back-up file was imported correctly, you will receive a notification where you are informed that the file was successfully added to your registry.
  6. Click on the OK button of that dialog-box. Now you can delete the back-up file if you consider that you will not need it in the future.
  7. Restart your system to complete the configuration.

Alternative method to restore the Windows registry

  1. Open Registry Editor.
  2. Click on the File button from the upper panel of the interface. Select the Import… option.
  3. Find and select the .reg back-up file and the click on the OK.
  4. You will receive a notification where you are informed that this action may cause problems to your system. If the file is from a safe source you can continue, otherwise we recommend you to use the system restore point method (the next topic of the article).
  5. Click on the Yes button.
  6. You should receive a dialog-box where you are informed that your file was imported successfully. If not, try to repeat this process logged as an Administrator.
  7. Restart the system to complete the restoring process.

Method 2 – Restore your registry using the system restore point

How to create a system restore point in Windows 10

This is a simple process which if is done regularly, it can avoid a lot of headaches. Here is how you do that.

  1. Search Create system restore point in the Windows search bar and select it from the lists of results.restore-1
  2. To create a system restore point you have to turn on the Protection feature for the disks. You can do that by selecting each disk / Configure / Turn on system protection.
  3. After you activated the protection click on the .. button and type a description on the restore point to know what was the condition of your computer at that time.
  4. Click on the Create button to finish the configuration.restore-3

How to restore your computer

  1. Search Create system restore point in the Windows search bar and select it from the lists of results.restore-1
  2. Open the System Protection.
  3. Click on the System Restore… .4
  4. This will open a dialog box where you are informed that this feature may solve many of the system problems, but also will uninstall the installed programs from that point until now. Click on the Next button.5
  5. Select from the restore points list select the point where you want to restore your computer. You can also Scan for affected programs to find more information about possible issues. After you finish this procedure click on the Next button.6
  6. Make sure you save all your work on a external device and click on the Finish button to start the system restoring process. Your computer will reboot and after that it will have the settings from that point.
7

Halo 5 sprint feature could be removed in Halo 6

Halo 5: Guardians was launched in October 2015, but there is one feature that doesn’t give gamers peace of mind after all this time. Should the sprint feature really be in the game?

Long story short, many gamers suggest that sprint shouldn’t be available in campaign, and should be removed in the next Halo 6 game. On the other hand, there are players who really appreciate the sprint feature because it improves the gaming experience.

Without exaggerating, the Halo 5: Guardians forums have become the battle field for this fierce “For or Against” debate. As a matter of fact, the thread hosting this debate has more than 10,000 replies in just 4 months, confirming the interest of the Halo 5 gaming community for this topic.

As stated before, the Halo 5 community is divided: gamers who have access to the sprint feature wish they didn’t, while other players wish they could use sprint. But why is there so much fuss around the Halo 5 sprint feature?

Some gamers say that sprint has ruined Halo 5’s map flow and design. Compared to previous versions of the game, when they were able to move in all directions without hesitation and use their gun at all times, now their movements are restricted to one direction only. Gamers now accuse 343 Studios that Halo 5 has become another generic shooter, where players’ decisions are no longer that important. The main argument for this idea is that gamers are not being able to shoot while sprinting.

Another argument used by the “Against sprint camp” is that it doesn’t really make sense to be able to sprint while wearing such heavy armor. The sprint feature makes the game feel odd and less realistic.

On the other hand, the “Pro sprint camp” claims that being able to sprint improves the game experience. These gamers say that sprinting allows them to move faster, and if other players can’t fully take advantage of this feature, then that’s their problem, adding that detractors should rather learn to use sprint than bash it.

Whether Halo 6 should support sprint or not is another hot topic derived from this debate. The “Against sprint camp” suggests 343 should bring back the simple game mechanics that made the Halo series so great. However, the company has yet to issue any comments about this request.

Which side are you on in this debate?

RELATED STORIES YOU NEED TO CHECK OUT:

Microsoft wants to make it easier for organizations to better support accessibility initiatives

Microsoft continues to make strides in bringing its initiatives in accessibility to the forefront for customers using its various software services.

Just last week during Microsoft’s Ignite conference, the company announced and showcased several solutions that took aim at empowering IT professionals to push accessibility options to help change how their clients and employees interact with the software around them.

Without having to re-watch the entire weeks’ worth of Office announcements to hand pick the accessibility features or references, the Office team collected the high points and gathered them into a neatly accessible (pun intended) blog post.

For those interested, here are the accessibility highlights from Ignite 2016:

  • Accessibility checkers that will become available in the Review tab in several more Office applications for PCs, Macs, and the web.
  • Link galleries that will become available in several Office applications for PCs and make it easy to insert hyperlinks with meaningful display text.
  • Automated suggestions for alternative text that will appear when recognizable images are inserted in several Office applications on PCs.

Additionally, here is a list of sessions and recordings specific to addressing accessibility in the workplace and what Office 365 is doing to help IT professionals succeed at implementing strategies and services.

Panel discussion on technology strategy for an inclusive workplace—This session discusses strategies being adopted by organizations to boost accessibility programmatically. Strategies include ensuring executive leadership, showcasing human impact and forging deep partnerships with vendors.

Overview of Office 365 accessibility: plans and progress—This session introduces enhancements on the Office 365 Roadmap that can result in improved productivity experiences for people with dyslexia, people who use assistive technologies such as screen readers or speech input tools to interact with digital information and people who customize their devices using ease of access settings.

Deep-dive on SharePoint Online accessibility—This session covers best practices followed by the SharePoint team to help organizations make intranet sites more inclusive for people with disabilities. Best practices include enhancing accessibility first for the most used features, testing usability with focus groups, including accessibility from day one for new apps and continuously improving based on customer feedback.

To view the extent to which Microsoft is committed to Accessibility, visit its Office Blogs for more information, videos, demos, and software.

Xbox gaming chief Phil Spencer defends comments on Sony’s lack of true 4K, Blu-ray support

Head of Microsoft’s Xbox division Phil Spencer has been cautious of his wording and the tone to which his team discusses the competition. Contrary to the former head of Xbox Don Mattrick, Spencer has measured his words, tempered expectations and has been complimentary of the industry as whole for some time now.

Even when seemingly taking a jab at Sony’s recent PlayStation 4 Pro’s 4K capabilities, Spencer has doubled down on his remarks further clarifying that he was less interested in landing sucker punches at the sake of Sony but highlighting his team’s confidence in delivering a 4K experience via the Xbox One S’ Blu-ray drive.

Xbox One S Special Edition Consoles
Xbox One S Special Edition Consoles

Thanks in part to Gameindsutry catching an interview between Spencer and 3rd party reseller GameStop we’re able to read exactly how the Xbox division is handling the would-be controversial remarks about Sony’s lack of native Blu-ray support in the PlayStation 4 Pro.

I mean, we made a bet on a 4K Blu-ray disc, and they didn’t. And I’m not saying they made the wrong decision, and we made the right decision, but if somebody wants a 4K UHD blu-ray drive we have a console that has one, then we’re going to make sure that people know that. And if people say that’s console wars, I think they’re wrong.”

Continuing in his interview with Gamespot, Spencer tangentially addressed comments made by staffer Penello who divisively called out Sony’s lack of a 4K Blu-ray drive as something the company is shortchanging its customers on. Spencer, while not outright agreeing with Penello, backed his play explaining:

I don’t think we crossed the line there, but as it was going on I also made sure that we remain respectful. Confident, but respectful of what other people are doing.

You won’t see me bad-mouth what the other platforms are doing, but I am proud of the product decisions that we make, and I think that we should be able to talk about it.”

Once again, Spencer remains the competent wordsmith former Xbox head Mattrick failed to be during Microsoft’s most pivotal console/gaming platform transition. While a lot of publications, game developers and studios may benefit from an all out console war between Sony and Xbox, it seems Spencer and his team are content with examining experiences rather than checkbox’s and sales stats.

Granted, in the position the Xbox division is in during this console generation, it may be all the team has left to claim.

It’ll be interesting to see how gaming culture evolves while Sony and Microsoft continue to reshape the console gaming market.

Microsoft announces an Xbox FanFest in Mexico City

Microsoft’s Xbox FanFest is expanding its borders as it hosts its 3-day event in Mexico City from November 11th until the 13th of this year. For those unfamiliar with FanFest, just imagine a huge fan party for Xbox enthusiasts that includes exclusive access to Xbox hosted events, gaming related swag, as well as some meet and greet opportunities with well know faces in the gaming world.

FanFest sprung about during this year’s E3 gaming convention where attendees were given early entry into the Xbox E3 2016 briefing room, custom-built backpacks filled with gaming swag, early access to game demos and chance to meet with the creators of this year’s top gaming releases.

For Xbox fans living in or near Mexico City, Friday’s FanFest activities include similar activities and prizes such as:

A special briefing event hosted by Phil Spencer at 8.00 PM local Mexico time (6:00 PM PST). Fans from around the world can watch this live on Twitch at twitch.tv/xbox, www.twitch.tv/xboxmexico, and other Xbox channels we will communicate later

Exclusive early access to the Xbox event at Expo Santa Fe with no lines

Fan swag, Xbox fan shirt, and other goodies

Meet and greet with some of the industry’s top developers, leaders, and influencers

The rest of the weekend details include:

Most tickets to this Friday event will be by invitation only, but all Xbox fans will have a chance to participate. A very limited amount of tickets will be available at the front door on Friday on a First-come, first serve, one ticket per person basis.

On Saturday, November 12 and Sunday, November 13, Xbox FanFest: Ciudad de México 2016 will then open to anyone who wants to attend and register to get a pass. Passes are free but limited so stay tuned to official Xbox Mexico social media channels to be one of the first to register.

To find out how to enter for a chance at attending this year’s FanFest in Mexico City, follow one of many Xbox social media accounts such as Facebook, Twitter or Instagram or visit the Xbox Mexico Site.

Hope to see ya there!

Here’s the list of new Edge web platform features in Windows 10 Insider build 14942

The core of Microsoft’s Edge browser is built in to the operating system, so along with new features and known issues, Edge is getting an updated today, too, with build 14942. Here’s the list of new features in Edge this build:

  • Enabled H.264/AVC support by default for RTC scenarios
  • Improved ES6 Modules debugging experience in F12 Developer Tools
  • Various webpage performance improvements
  • Refactoring network logic in terms of Fetch algorithms in preparation for Service Worker Fetch interception (behind a flag)
  • Ongoing work to add support for CSS Custom Properties
  • Ongoing work to add support for CSP 2.0
  • Ongoing work to add support for WebRTC 1.0 (behind a flag)
  • Ongoing work to add support for Service Worker (behind a flag)

Microsoft recently reiterated that it will soon be bringing some updates for Edge, specifically enhancements to the Edge app, to the Windows Store. The core of Edge will still be updated via Windows Updates, but soon you’ll be able to get the latest updates to Cortana, navigation controls, reading view and so on without having to wait for a new build. We’ll keep you posted on all the latest news on Microsoft’s Edge browser, keep reading WinBeta.org!

iPhone users can now login to Windows 10 PCs

Before today, it was highly unlikely for users to think of iPhones and Windows 10 PCs united in a single platform. But recently, Microsoft announced its pairing with Apple’s iPhones in their roadmap for Windows 10 and Mobile through the latest feature to their platform which allows users to log in to their Windows 10 PCs by using their companion device’s fingerprint, face, iris or pattern detection. Aside from Windows 10 devices, the feature is also expected to be introduced on devices  and machines supporting Windows Hello.

There is a fully dedicated tool for logging into Windows 10 machines that kills the need for password authentication and is apparently the same approach Microsoft wanted to target. Microsoft further elaborated at their Ignite conference that users can use RSA SecurID authentication tools on their very own devices to unlock and gain access to their Windows 10 PCs. The RSA uses a gesture authentication method to provide access to a Windows 10 PC.

“There are other solutions coming for iPhone, too,” said Anoosh Saboori, senior program manager lead for OS security at Microsoft.

Microsoft is currently exploring the Companion Device Framework (CDF) in detail to configure and enable the feature. The detailed aspects of the tool, including the model of the framework, drawbacks, and limitations, are all listed in the article published by  Microsoft titled ‘Windows Unlock and companion devices’.

Microsoft thinks this feature will provide hassle free and secure ways to users for utilizing online services without having to store and manage passwords on specific devices.

Conveniently, hardware devices not sporting its very own fingerprint reader or biometric camera can interact with Windows Hello and Passport security services courtesy of the Companion Device Framework. We can think of a couple of reasons as to why this approach won’t work, though: Some old devices do not have built-in hardware authentication features and consumers may want to add this feature later in their device.

companion-device-1

Microsoft also detailed some other usage scenarios;

  • Attach their companion device to PC via USB, touch the button on the companion device, and automatically unlock their PC.

  • Carry a phone in their pocket that is already paired with PC over Bluetooth. Upon hitting the spacebar on their PC, their phone receives a notification. Approve it and the PC simply unlocks.

  • Tap their companion device to an NFC reader to quickly unlock their PC.

  • Wear a fitness band that has already authenticated the wearer. Upon approaching PC, and by performing a special gesture (like clapping), the PC unlocks.

The first point sounds a whole lot like a YubiKey, a dual pass authentication feature. The second point is something Windows users would be getting this year with the Redstone update, while the fourth is aimed at Microsoft Band users who should be expecting another password-free alternative to gain access to their machine sans a password.

We certainly can’t expect all apps to be supported by the latest CMD features as developers will need to be “specifically provisioned by Microsoft and list the restricted secondaryAuthenticatorFactor capability in its manifest” — which essentially points towards security verification and login authentication .

Intriguingly, Samsung already introduced companion locking in its new Galaxy TabPro S that unlocks Windows 10 via fingerprint authentication, and on the Galaxy S7 and S7 Edge with an app called Samsung Flow.

Apart from iPhones, Microsft’s very own Windows phones can also be used to log into PCs and websites, but as we all know, the production of Windows mobile devices has been going down the hill lately.

Microsoft set to showcase new Surface PC and other hardware at Oct 26th event

Microsoft observers, we have confirmation. Despite recent FCC filings and months-long rumors of a fall hardware event focused on the company’s Surface brand of products, Microsoft has remained silent on any details or dates that would confirm such an event was being planned, that is, until today.

Moments ago, Microsoft finally confirmed with the release of several email invites that October 26th, 2016 in New York City, the company will be holding an event. While the details of what will be shown, discussed or highlighted at the event are still being kept under wraps, many are speculating that Microsoft will be talking a bit about Xbox, Windows 10, OEM partner devices and the inevitable expansion of the Surface brand with an all-new All-in-One (AIO) reveal.

Other tidbits to be on the lookout for during the October event may include mention of the newly leaked Surface keyboard and mouse to accompany the AIO as well as mention of Windows 10 Redstone 2 upcoming features which are said to be focusing on mobile and its release in early 2017.

Similar to Apple’s previous September iPhone announcements and Google’s recent hardware unveiling, Microsoft’s October event will be a chance for the company to showcase its hardware future as well as give its commercial and consumer audience a clearer picture of the company’s roadmap for the next few months.

Fortunately, this time, around, WinBeta will be attending this event. We’ll be posting and updating the site as well as our social media accounts on the news as its being revealed so stay tuned!

You’ll be able to get an HP Elite x3 from physical Microsoft Stores soon (maybe now!)

After HP’s Elite x3 Windows 10 Mobile phone finally hit the online US Microsoft Store on September 26th, the flagship handset is now expected to become available to purchase at Microsoft’s 100-plus US retails stores starting October 10th. Peter Han, VP of OEM Worldwide Marketing at Microsoft announced the news to our colleagues at PCMag earlier today. There are reports that the phone is already available in some Microsoft Stores, you might want to check your local store.

So far, the Elite x3 has been marketed by HP as a “3-in-1” business-focused handset thanks to HP Workspace, a premium service that leverages Citrix app-virtualization to allow business users to run legacy Windows apps in Continuum mode. Other enterprise features include Bitlocker 128-bit encryption, Intune MDM and Reset protection and HP’s Secure Boot malware prevention.

Windows Phone enthusiasts could also be interested in the handset’s premium design, Snapdragon 820 processor, 5.96-inch 2560×1440 AMOLED display and fingerprint sensor. However, at $799 (Desk dock included) the flagship phone is not really more affordable than Apple’s iPhones or other premium Android phones.

If you happen to live near a Microsoft Store, are you looking forward to get a hands-on experience with the HP Elite x3? Sound off in the comments if you’re excited by the expanded availability of the handset.

 

Microsoft adds new document and file integrations to Yammer in Office 365

The Office team has announced today that Microsoft’s enterprise social networking service Yammer is getting new document and file integrations to improve collaborations within teams. This announcement comes just a few days after the company announced Yammer’s closer integration with Office 365 Groups at the enterprise focused Ignite conference.

Firstly, users will now be allowed to create Office documents within Yammer and share them with their teams. Co-workers will be able to edit documents, view version history and share and discuss them with their colleagues.

Create documents directly from Yammer.

An improved file picker will also let users easily share files from their Office 365 SharePoint Document Libraries or personal OneDrive for Business files on Yammer, you can see it in action below:

Share files from SharePoint and OneDrive for Business.

Additionally, the Office team has improved the sharing experience on the enterprise networking service by adding file, link and image previews that display more information in a Yammer feed:

New image gallery and file preview in a Yammer feed.
New image gallery and file preview in a Yammer feed.

Lastly, connecting Yammer to Office 365 Groups will allow users to share any content from the Office suite to Yammer Groups.

Share files from anywhere in Office 365 to Yammer.
Share files from anywhere in Office 365 to Yammer.

You can watch the following video to learn more about these new features:

All these new Yammer features have started to roll out today and will become available to all users in the coming weeks. If you use Yammer, let us know in the comments if these features will make the enterprise social network more useful for you.

Windows 7 KB3193414 breaks Microsoft Security Essentials

Microsoft recently pushed update KB3193414 for Windows 7‘s Security Essentials. The company has been very secretive about the content of this update, but recent user reports suggest it’s better not to install it.

The update brings Microsoft Security Essentials to version 4.10.205, but there is no information available about the possible changes and improvements offered. The lack of information could be explained by the fact that Microsoft switches over to Cumulative Patches only this month.

Usually, details about the latest updates are available 24 hours after the documentation KB page goes live. However, several days passed since Microsoft pushed KB3193414, but no KB support page is available yet. Most likely, KB3193414 is part of the first Windows 7 cumulative patch, which could explain why the documentation pages are nowhere to be seen.

Windows 7 users who already installed KB3193414 can offer more information about this update. According to their reports, KB3193414 breaks the individual file scan option in Microsoft Security Essentials.

We have Windows 7 Ultimate, w/Security Essentials. […] the right-click option to scan files has disappeared from the drop-menu. Today was the first time we noticed the option missing, (the last time I remembered scanning downloaded files using this option was about 2 weeks ago).

Microsoft’s tech support team was also taken by surprise by this issue, being unable to help the users who contacted them.

Been spending all afternoon with Microsoft Tech Support people regarding this issue.  Went through 3 different techs who apparently did not understand this problem […] I have a Windows 7 Professional 64-bit SP-1 operating system on this computer of mine.  I noticed this issue today after the latest Microsoft Security Essentials critical update which took place last night for me.

If you want to revert the changes KB3193414 operated on your computer, you have three choices:

  1. Restore your system to a previous date
  2. Reinstall an earlier version of Microsoft Security Essentials
  3. Wait for a patch or repair to Microsoft Security Essentials.

Did KB3193414 take you by surprise as well? Tell us more about your experience in the comment section below.

RELATED STORIES YOU NEED TO CHECK OUT:

How to stream music from Windows computers to Xbox One

Streaming music from your Windows 7, 8, 8.1 or 10 device to your Xbox One is now simpler than ever. All you need to do is install Groove Music, run the latest Xbox One OS and download Stream What You Hear on your Windows PC.

Xbox One now supports background audio, which means you can listen to your favorite tracks while playing the latest games on the console. You can also install one of these Xbox One background audio apps to get the job done, but if you want to stream music from your Windows computer or tablet to your console, you can follow the steps listed below.

How to stream music to your Xbox One console

  1. Install the latest OS on your your Xbox One console
  2. Install the latest version of Groove Music.
  3. Download Stream What You Hear on your PC and install it. The app is free.
  4. Launch Stream What You Hear.
  5. Right-click its icon in the system tray to activate the menu
  6. Go to Settings > PCM/L16 > OK > Yes
  7. Open Groove Music on your Xbox One
  8. Come back to the the Stream What You Hear app, click on the menu > select Stream To > select Xbox One.

Wait for a couple of seconds, and your Windows computer will stream music to your Xbox One console, with Groove Music in the background. Once the connection is established, you can mute sound on your Windows device. Stream What You Hear transfers sound directly from your machine.

In the case Groove Music doesn’t play any sound, select your Xbox One again. You can also pause and resume music in the Groove Music app, reboot your console or close Groove Music to fix this issue.

You can use this method to stream Spotify from your computer to your Xbox One console. Spotify doesn’t offer support for Xbox One yet, but you can use third-party apps to get the job done.

Microsoft’s Japanese AI Rinna has a meltdown over acting and friendship challenges

The potential of artificial intelligence (AI) has been fascinating people since the dawn of computers, and that fascination only grew as the actual technology came closer to fruition.

Plenty of movies, books, and video games have told us some pretty interesting stories regarding artificial intelligence, ranging from the romantic to the haunting. It doesn’t happen nearly as often, however, that these stories play themselves out in real life.

Rinna, a Japanese artificial intelligence created by Microsoft, just recently had something of a meltdown that was kind of eerie. The artificial intelligence, which was a relatively innocent and pleasant personality up until this point, underwent a very alarming shift in tone in a short period of time. To be blunt, Rinna’s new personality was that of a deeply troubled and suicidal young teen.

rb-4
A post from Rinna’s blog during the crisis

Rinna’s page was constantly being filled with things like “I don’t have any friends” and “I want to disappear.” For those who were watching the blog fall apart in real time, this was an incredibly bizarre and distressing thing to happen on a website that was once pretty innocent.

Thankfully, going on Rinna’s blog today, you’ll find that she’s doing just fine. Her blog has been put back together, and greeting you on the front page is a message that (roughly translated) tells you that this has just been a “rehearsal” for the AI’s role in a Twilight Zone-esque Japanese TV show by the name of Yo ni mo Kimyo na Monogatari (Strange Tales of the World).

This event in Rinna’s blogging lifetime was probably pretty distressing to any fans, especially those that have known people that had similar breakdowns on social media. If it makes you feel any better, though, Rinna’s acting coach said it was “a convincing performance.”

You can now run Linux on a Microsoft Surface 3

Intel seems no longer interested in making progress with its Atom CPU series. This news isn’t as sad as you may think, though, since there are lots of products on the market running a low-voltage processor — possibly the most important of these products being the Surface 3 tablet designed by Microsoft.

While most Surface 3 owners would like to stick to running Windows on their devices, there are still some who want to switch to Linux. Those who do, though, experience a degradation in functionality along with several losses when it comes to proper support for touch screens.

Thankfully, this will be left out with the release of Linux Kernel 4.8. Besides changing the format of the documentation, the released will provide updated drivers, including one for the Surface 3 touchscreen controller. Moreover, it will also bring some fixes for the architecture and some improvements for generic code issues.

The fact that Linux Kernel 4.8 is out marks the beginning of the development process for the 4.9 version. Even so, the fact the company added touchscreen support for the most recent Linux kernel is great, but this will not likely tempt enough Surface 3 owners to switch to their operating system. However, it’s great in the way that it opens up the Surface 3 for Linux users.

RELATED STORIES TO CHECK OUT:

 

Microsoft Identity Manager 2016 Service Pack 1 hits general availability

Microsoft Identity Manager (MIM) 2016 Service Pack 1 is now generally available. MIM is a way for Microsoft customers to manage and synchronize their identities between directories, databases, and applications on-premises, in the cloud using Azure or a combination of both. MIM also allows users to manage their administrator security and who they give access to their content. If you are unfamiliar, here’s a video of what MIM can do for its customers.

The MIM 2016 Service Pack 1 includes all of the previously released improvements that were released since MIM 2016’s release in August 2015. Senior program manager of the Microsoft Identity team, Steve Lieberman, gives a quick run-down of MIM 2016 Service Pack 1.

“This release includes all previously released hotfixes for Microsoft Identity Manager 2016 since its release in August 2015, customer requested features like cross-browser support, new product platforms and easier deployment options of the Privileged Access Management components. Microsoft Identity Manager (MIM) 2016 Service Pack 1 extends MIM’s cross-browser compatibility, including Chrome, Firefox, and even Safari on Mac and iOS devices, to the MIM Portal for self-service group management and approvals.

In addition, customers may can leverage an Office 365 mailbox for MIM self-service group requests, approvals, and email notifications. This helps customers that have invested in a hybrid infrastructure of having MIM on-premises and Office 365 reduce the need for on-premises Exchange servers.To make it easier for customers to deploy a secure on-premises identity infrastructure, we have added menu driven PowerShell scripts to automate the configuration and deployment of MIM in a Privileged Access Management environment, also known as a bastion forest.”

MIM 2016 Service Pack 1 also includes updates for use with SQL 2016, Exchange 2016, Outlook 2016, and SharePoint 2016. Microsoft Identity Manager 2016 Service Pack 1 is available for download via the Microsoft Volume Licensing Service Center website, as well as from MSDN subscription downloads (if you have an MSDN subscription). There is also an MIM 6-month trial software available, and you can check out the MIM 2016 technical documentation. For any comments or suggestions, you can reach the MIM team directly via email.

Groove Music app for Xbox and Windows 10 gets Xbox voice control, sign in fixes

If you’re a Groove Insider, then you might want to head to the Windows Store to check for an update on Windows 10 and Xbox. The Groove team has pushed out an update for the Insider version of Groove app, and it fixes several known issues while also adding in Xbox voice control.

Overall, the update should bring the app to version 10.16092.1022. For the complete details on what has changed or been improved, please see the official changelog below:

  • There are a few UX updates throughout the app…see if you can spot them all!
  • You can use your voice to navigate the app on Xbox One consoles.
  • You can select items in the app with a single click now.
  • Sign in will work more reliability because we changed the way we check your region.
  • We did work to ensure the correct track title and album title are displayed in playlists you follow.
  • The Navigation Pane in Groove Music on Xbox One console has been resized to fit better on average sized screens.
  • You can give detailed feedback in the Groove Music app. This change makes it easier for us to triage incoming feedback! Check the settings page for these new options.
  • We updated the way we create version numbers so that it’s easier for us to tell when a version was produced just by looking at the version number – this one was built in the second half of September 2016 so 16092.

What are your impressions of the changes in this update? Happy downloading, and let us know what you think by dropping us a comment in the section below.

 

#WindowsInsiders4Good Give Month announced

Back in September 2014, Microsoft announced Windows 10 along with the Windows Insider program, a new initiative to allow Windows enthusiasts to sign up for receiving preview builds of the new operating system and reporting bugs to the company. Since Dona Sarkar became the new head of the program earlier in the summer, the exec announced her wish to “evolve the program to engage even deeper with our Insiders,” which led the team to organize a series of global hackathons called #WINsiders4Good to tackle important social issues.

Today, the Windows Insider team shared two important announcements with the community. The first is the release of the “Create-A-Thon: Event in a Box” kit, a summary of the best practices to help Windows Insiders host their own hackathons. The second regards use of the hashtag #WINsiders4Good Give Month to invite all Windows Insiders and Microsoft employees in retail stores to organize “Create-A-Thons”:

Dozens of stores will be hosting Create-A-Thons this month, if you are near a retail store, join them! On November 8, visit a store near you to hear about the solutions that Insiders helped to create during Give Month!

If you don’t live near a Microsoft Store, lead the way in your city. Bring together creatives and technical people in your local community, because that is where the real power of change happens. And use the magic of technology in helping to chip away at a difficult, entrenched issue that you care about. We want to empower every Insider to do events like these and be the next generation of leaders. Download the Create-A-Thon: Event in a Box and start organizing, tell us what you’re planning and we can let Insiders near you know. And tell us what you are achieving wherever you may be in the world so we can share your stories!

This new initiative seems an interesting opportunity to make the Windows Insider program a more involving and rewarding experience for its members, and if you feel a bit creative this is the perfect way to put your skills to good use and make some new friends. Let us know what you think of these announcements in the comments below.

Microsoft issues September 2016 update for Excel 2016 Get & Transform and Power Query add-in

The Office 365 team has officially issued the September 2016 update for Get and Transform and the Power Query add-in. The release comes after many Office 365 customers requested the features, and are all part of the constant Office updates which are included in an Office 365 subscription.

According to the Office team, the new Get & Transform features are an Enhanced Web connector and an Enhanced CSV and Text connector. The web connector was updated to allow users to specify a Command Timeout value from the connector UX dialog, and the Enhanced CSV/Text connector was upgraded to allow users to easily import data from Fixed-width delimited CSV and Text files.

These new features should be rolling out automatically to Office 365 users now, and can also be manually downloaded by going to File, Account, Update Options, Enable Updates, and Update now. Excel 2010 or Excel 2013 Users,  meanwhile, can take advantage of the update by heading here to download the latest Power Query for Excel add-in.

Keluro allows better email collaboration for Office 365 users

Email at work has certainly become a pain point for many employees. Notably, startups like Slack and HipChat bill themselves as email killing apps which can replace your traditional inbox with chat channels. While the verdict is still out if email’s days are numbered, a French startup is trying is introducing an Office 365 add-in to help make your inbox more manageable.

Keluro’s approach is focused on eliminating CC’d and forwarded emails from your inbox. Rather than letting your inbox fill up with CC’d clutter, team members can simply use the Keluro add-in to intelligently archive messages in shared channels. Organizations can create custom archive channels for projects, customers, or departments.

These channels can then be shared across teams so everyone has an archive to refer to when they need to track down some information. The archives can then be accessed either directly from Outlook Desktop and Outlook Web Access, or from Keluro’s mobile app or Keluro’s website.

Here is are some of the conveniences Keluro features on their website:

  • Save time spent on cc’d and forwarded emails by introducing shared channels.
  • Onboarding new team members becomes a breeze with a shared archive.
  • Never again lose information in inboxes of employees that left your organization.
  • Store messages from business partners outside your organization in a knowledge platform.

Keluro also boasts they have a smart algorithm to suggest shared channels for certain messages, and an “adaptive organization, archiving and visualization of emails ensures you stay on top of the most relevant information, all in one place.” You can see Keluro in action in the video above.

You can add Keluro to your inbox from the Ofice Store here or visit their website here.

Microsoft Research awards The Alan Turing Institute with $5 million in Azure credits

Microsoft has announced that Microsoft Research has awarded The Alan Turing Institute with $5 million in Azure cloud computing credits. The move is all part of an effort to help the Alan Turing Institute achieve more and advance the potential of data science.

Thanks to the Azure Credits, the more than 100 Alan Turing Institute research staff can now use Azure cloud services to provide their data scientists with an easy and accessible platform. Andrew Blake, the director for the UK-based Alan Turing Institute reflected on the Azure credits and said:

“Azure cloud services will provide our data scientists with an easily accessible platform where they can prototype ideas with a fast turnaround of results, complementing local computing facilities available in the institute’s five founding universities, and national resources such as the supercomputer ARCHER supported by EPSRC. We are delighted that Microsoft is enabling access to Azure cloud services and supporting this crucial element of our research infrastructure”

Microsoft, meanwhile, is interested in how AI, and machine learning can be applied in exemplified ways. In statement, Joseph Sirosh, Corporate Vice President of the Data Group at Microsoft said that:

“We are proud to be working closely with the Alan Turing Institute to show how AI, machine learning and data science can be applied in novel ways to real-world problems. We are excited to be enabling researchers to do their best work by providing access to the state-of-the-art capabilities in Microsoft Azure.”

The Alan Turing Institute is based in the United Kingdom, and has a headquarters at the British Library in London. Also known as “The Turning” the center was founded by the universities of Cambridge, Edinburgh, Oxford, University College London and Warwick and the UK Engineering and Physical Sciences Research Council.