SSD Won’t Format in Windows? 2 Ways to Fix it

Posted on by Vladimir Popescu

Many people using an SSD drive have reported that their SSD won’t format, or if the process starts, it will stop at offset. If you are in the same situation, we understand how frustrating that can be.

Using an SSD should be much easier than with a normal hard drive, but errors are prone to happen occasionally, no matter what type of drive you’re using.

It is recommended that you only buy and use branded SSDs, as the generic ones can cause you a lot of trouble, and there is no support available for them. This would imply that if your drive fails for whatever reason, you will need to replace it.

Now, let’s explore some of the best methods to fix things when you can format the SSD drive.

What can I do if the SSD won’t format?

1. Remove write protection from your SSD drive

  1. Press Windows + R to open Run, type diskpart, and hit Enter.
  2. Paste the following command and hit Enter:list disk
  3. Identify the SSD in the list, type the following command, and press Enter (where X is the name of your SSD):select disk Xdiskpart - SSD drive won't format/SSD format error occured at offset
  4. Run the command: attributes disk clear readonly
  5. Wait for the process to complete and then close the Command Prompt.
  6. Try formatting your SSD drive again.

If your SSD is write-protected, you will not be able to write any new information on it or change the information stored already. To remove the write protection, you can use the Diskpart tool.

2. Format the raw SSD

Tip icon Tip
It is recommended that you open Disk Management to check the status of your SSD. When the item is shown as Raw inside the Disk Management window, you should format the SSD
  1. Run Diskpart in an elevated Command Prompt with the following command:diskpartdiskpart to fix ssd won't format
  2. Execute the following commands individually and replace X in the second one with the number currently allotted to the SSD, and m is the letter you want to assign it later:list disk select disk X clean create partition primary format fs=ntfs quick assign letter=m

If you want to format your external SSD drive to FAT32 or exFAT, you should replace NTFS with FAT32 or exFAT.

In this fix article, we explored the fastest and easiest steps to take if your SSD drive won’t format, even a new one, or if a format error occurred at the offset of the formatting process.

You will first need to make sure that your SSD drive is not write-protected and change it if that’s the case. Then, you will need to format your SSD using some Diskpart commands.

Please let us know if this guide was helpful using the comment section below.

Fix Xbox One error 0x800401fb in four easy steps

Posted on by Milan Stanojevic

Many Xbox One users reported 0x800401fb error on their console. This error appears when they try to perform specific actions. Notably, it either appears at the startup or when you are trying to access My games & apps menu.

This problem restricts them from accessing the dashboard, starting any apps, and performing other tasks. Here’s is how one of the users affected by this issue reported on Xbox user forums

As soon as I turn of my Xbox it displays this error code (0x800401fb) and a “close” button. Hitting the home button or the “close” button doesn’t work. Please help.

If you have also encountered this error, try performing our tried and tested solutions.

How to fix Xbox One error 0x800401fb?

1. Perform a power cycle

power cycle error 0x800401fb xbox one

  1. To reset your console, press and hold the Power button for around 10 seconds. Wait for the switch to turn off completely.
  2. At this step unplug your console and wait for around 30-60 seconds before turning it on again.
  3. Finally, plug-in the console and press the Power button and wait until the Xbox animation logo appears.
  4. The power-cycling procedure is now complete and the problem should be resolved now.

2. Check the status of Xbox Live services

check xbox live status error 0x800401fb xbox one

  1. Some times the Xbox Live services are temporarily unavailable during the maintenance period. Visit this site to see if there’s a problem with the service.
  2. Check the current status of Xbox Live core services.
  3. Proceed to the next solution if all the services are running normally.
  4. If the services are down, you need to wait until Microsoft resolves the server issues at the backend.
  5. Check again after a few hours by restarting your console and see if the problem persists.

3. Contact customer support

contact support error 0x800401fb xbox one

  1. In case, if none of the above-mentioned solutions worked for you, contacting the Xbox support team might be helpful.
  2. Visit the Microsoft web site and head towards the Support section to get live support.

4. Reset the console

reset console error 0x800401fb xbox one

  1. First, open the guide menu by pressing the Xbox button located on your controller.
  2. Once the guide menu is open, navigate to System -> Settings -> System -> Console Info.
  3. Now select Reset console from the Console Info menu.
  4. Select Reset and keep my games & apps available under the Reset your console menu.
  5. Your console will reinstall the operating system at this step. Based on your network, you need to wait for a while until the process is complete.
  6. The console will go through an automatic restart at the end of this process.

Once the reboot is complete, 0x800401fb error should disappear and you should be able to use your game station without any issues.

We hope that you were able to get rid of the frustrating error with the help of our list of solutions. Comment down below if you found this article useful.

How to delete a virtual machine on VMware

Posted on by Vladimir Popescu

In case you’re wondering how to delete a virtual machine on VMware, you have found the perfect guide.

Using VMware virtual machines can be extremely useful if done properly.

There will be moments in which you will need to clean up your VM set and remove any old or un-used virtual machines from your system.

Doing this allows you to make your PC run more efficiently, and in turn, to make use of your virtual machines at full speed, and without any clutter bothering you.

VMware has made it easy for you to edit your VMs, but there are a few differences depending on what version of the software you’re using currently.

In this how-to guide, we will discuss those differences and will give you an exact list of steps to follow in order to manage to delete a virtual machine on VMware.

Please make sure to read the guide carefully, and to follow the steps in the order that they were written in.

This will allow you to make sure that none of your useful virtual machines will disappear, or become corrupted in any way.

Read on to find out more.

Follow these steps to ensure that you properly delete a VM in VMware

Note: Deleting a virtual machine means that all the data stored on it will be completely erased.

If you have any doubts about what VM to delete, or you are deleting it to re-create it, please make sure to backup your data and store in on a secure device.

Delete a virtual  machine on VMware Workstation 7.x and above:

notebook and pen - VMware how to delete a virtual machine

  1. Open VMware and navigate to the list of virtual machines stored on your hard drive.
  2. Click the name of the machine you want to remove.
  3. Select the Manage in option found in the Workstation menu bar.
  4. Choose the option Delete from disk.
  5. Confirm the deletion process by clicking Yes in the pop-up that appears.
  6. This will remove the VM and place it into your Recycle Bin.
  7. To free up space on your Workstation, you will need to right-click the Recycle Bin -> select Empty Recycle Bin.

Wondering how to boot from USB drive in VMware? Try this

Delete a virtual  machine on VMware Workstation Player 12.x:

Laptop with user and coffee - VMware how to delete a virtual machine

  1. Open VMware on your machine -> navigate to the list of installed virtual machines.
  2. Right-click the virtual machine you want to remove -> select Delete from disk.
  3. Confirm that you want to delete it by pressing the Yes button inside the prompt.
  4. To also free up disk space, you will need to empty the Recycle Bin as well.

Conclusion

In today’s how-to guide we explored the most efficient ways of deleting a virtual machine on VMware, and also how to clear up space on your hard-drive.

Please feel free to let us know if this article was helpful by using the comment section found below this article.

Before you leave, you might be interested in the best settings for running Windows 10 in VMware, and we have an entire article dedicated to this subject.

SSD errors occured during data transfer [SOLVED]

Posted on by Milan Stanojevic

SSDs (short for “solid-state drives“) are reliable and fast hardware for storing data. Tech giants started the transition from HDDs (hard-disk drives) to SSDs some years ago.

The reasons for this change are many. SSDs are less prone to physical damage and as we said before, they are faster. Desktop computers and laptops work much better with SSDs. Also, users encounter fewer errors with SSD than with HDDs.

However, these pieces of hardware are not perfect. Quite a few users encountered issues when trying to transfer data on an SSD.

This is a major issue, but fortunately, there are a few solutions available to solve the problem quickly. Today we will show you what to do if you can transfer data on an SSD.

Solve data transfer errors on SSD

1. Try another SATA cable

Sometimes, you can solve this issue by replacing the SATA cable. These cables are used to connect the motherboard to the SSD.

Moreover, try different SATA ports to check if your original port is broken.

If this solution doesn’t work, try the next one.

2. Run an SFC scan

Corrupted files could cause data transfer errors in an SSD. To scan and fix this issue, you can run an SFC scan.

  1. Press the Windows key + X and type Command Prompt.
  2. Select Command Prompt (Admin) to open the Command Prompt as an administrator.command prompt administrator
  3. Type sfc /scannow and press Enter.run Sfc scannow command - Windows update fix
  4. The repair process will now start. Wait until the repair process is complete.
  5. When the SFC scan is complete, the Command Prompt might state, “Windows Resource Protection found corrupt files and successfully repaired them.” If that’s the case, restart Windows.

Conclusion

As you can see, this issue can be solved quickly with some easy solutions. You can try another SATA cable or run an SFC scan.

However, if these methods don’t work, your SSD might be damaged. Still, you can try to connect the SSD to your motherboard through other SATA ports.

Also, it is recommended to keep your SSD healthy. Try one of these tools from our fresh list to improve your drive’s performance!

Did our article help you? Did you find another way to solve data transfer errors on SSD? Do let us know in the comments section below.

Want to attend the Oct 2 Microsoft Event in NYC? Enter for your chance right now!

Posted on by Radu Tyrsina

Microsoft’s Surface hardware events typically are reserved for influencers, journalists, and those with very close ties to the tech industry. However, Microsoft executive Yusuf Mehdi has just announced new sweepstakes, where you can enter for a chance to join the best of the best, and experience the upcoming October 2 Microsoft event in person.

To enter, all you need to do is respond to Mehdi’s above tweet, and say what you love about Surface. Since this is a Twitter sweepstakes, you’ll also need to use the hashtag #MicrosoftEventSweepstakes. Mehdi will choose a winner this Sunday, September 22, at 6 PM PT.

If you’re not from the New York City area, and you happen to win this sweepstakes, Microsoft will pay to send you to the October 2 event. For the winner, that will include a round trip coach airfare from a major airport closest to your home. A 2-night hotel accommodation, transportation to and from the hotel, and a $300 spending allowance during the trip are included as well. You’ll also get an admission to attend an exclusive Microsoft Fan Event, in addition to the product announcement event.

There is some fine print, and you must be 21 years old to enter. You also must be following Mehdi on Twitter, and there’s a limit to one entry per person. Full terms are available here.

Windows 10 news recap: Surface Pro 7’s Surface Pen could have wireless charging, virtual desktops can be named, and more

Posted on by Radu Tyrsina

Welcome back to our Windows 10 news recap, where we go over the top stories of the past week in the world of Microsoft’s flagship operating system.

The Surface Pro 7’s Surface Pen might support wireless charging

A new FCC filing suggests that the Surface Pro 7 could have a Surface Pen that supports wireless charging.

You can name your virtual desktops in Windows 10, thanks to user feedback

Based on Windows Insider user feedback, Microsoft is adding the ability to name virtual desktops in Windows 10. The feature is currently available to Insiders.

Rockstar Games launches new game launcher on Windows and offers GTA: San Andreas for free

Rockstar Games has launched its own game launcher on Windows, in an aim to get gamers to purchase games directly rather than via game distribution platforms, such as Steam. As an enticing offer, it is offering GTA: San Andreas for free.

Wi-Fi 6 gets certified, marks new milestone in adoption of a faster wireless standard

The next generation of WiFi, Wi-Fi 6 has been certified. The new wireless standard aims to deliver even faster WiFi connections.

Microsoft, Azure Data Centers

That’s it for this week. We’ll be back next week with more Windows 10 news!

Common Blasphemous bugs and how to fix them

Posted on by Teodor Nechita

Blasphemous is an action-platformer that could only be described as punishing.

However, despite how simple a pixel-art platformer may seem, it isn’t safe from being riddled with bugs.

Apparently, most of them are the same bugs reported with the demo version.

A reason why they managed to make it to the live version was soon to follow:

They can’t be fixed yet. This version was pushed long before the demo came out. It will all be fixed in a post-release patch. Hopefully it comes soon.

How can I fix Blasphemous bugs?

1. Controller issues on high-frequency monitors

Many players have discovered they are unable to drop down a level.

Unfortunately, in a platformer, this is fundamentally a game-breaker,  since if you can’t drop down a level, then you cannot play.

Fortunately, all you need to do is deactivate V-Sync, and all issues should be solved.:

  1. To turn off V-Sync, go into the game options
    • If you are in-game, open your map screen where you can access the game options by pressing X or Square

As mentioned above, this issue seems to be common among users who have monitors that will go above 60 FPS, especially 144 Hz monitors.

2. You sometimes can’t climb ladders

Similar to the bug mentioned above, players are reporting that sometimes they can’t climb ladders.

There is no known fix for this bug.

3. Striking toxic drops with your attacks makes the screen shake

Normally the camera would shake for added effect when striking mobs, but this also happens with toxic drops which you should avoid.

Whether this is actually a bug or as designed is not yet known.

However, your graphics card’s driver might be the fault.

Try to uninstall your GPU driver and install the default one from Windows:

  1. Press Windows + R
  2. Type in hdwwiz.cpl
  3. Select Display adapter
  4. Right-click the one you need and select Uninstall
  5. Restart your PC and wait for it to install the default one

Hardware drivers are programs that allow Windows to communicate with your computer’s hardware.

You can update drivers manually if you are completely familiar with the drivers your PC requires.

These drivers are developed by device makers, and you can obtain them directly from the manufacturer of your PC on the official website.

Keep in mind that doing this on your own can take some time, and there is always an alternative to ensure the correct driver is installed.

A computer cannot manage video cards, computer programs, sound cards, or other hardware on its own; they must be managed by a driver. When a driver issue occurs, it’s good to try a tool dedicated for such cases.

Outbyte Driver Updater is a useful software for installing and updating drivers on your computer. After the installation, you only need to scan your PC. It will detect specific missing drivers and request your permission to install them.

⇒ Get Fortect Driver Updater

2. The game fails to transition through scenes

When entering a doorway to another level, the camera simply drops down and all you can do is exit the game and try again.

Until a patch will come out to fix this issue, your only choice is to re-load the game from a previous point.

4. Some mobs stay invincible

Ghosts will sometimes stay invincible if the spawning sound that accompanies them plays in a loop continuously.

Until a patch will come out to fix this issue, all you can do is re-load the game from a previous point.

5. You sometimes can’t avoid enemy damage

There are cases of players still receiving damage when struck by an enemy, despite the parry or dodge animation playing successfully.

More so, if two enemies synchronize their attacks at the same time, you cannot parry them.

Whether this second one is actually a bug or as designed is not yet known.

What to do if Borderlands 3 is crashing

Posted on by Teodor Nechita

Borderlands 3 is an immense success among the fanbase, but it comes with its own fair share of issues.

The biggest issue that could probably plague any game is when it suddenly crashes, and you have to restart it, possibly losing hours of progress made.

Fans of the 4th entry into the Borderlands series have already started reporting that this is happening to them as well.

My game keeps crashing probably 5 – 10 min in to the game(not in Menu)

This is a serious issue, since crashing after a few hours’ worths of binging means you could lose all progress made.

However, crashing less than 10 minutes into the game is worse, since players will simply give up, and maybe even ask for refunds.

How to stop Borderlands 3’s crash issues?

1. Make sure your hardware meets the games minimum system requirements

Head over to Gearbox’s official website and find out if your PC meets Borderlands 3’s minimum system requirements.

Borderlands 3 FPS drops DXDiag

2. Launch the Epic Games Launcher using administrator rights

  1. Right-click the Epic Games Launcher on your desktop or Start Menu
  2. Click Properties
  3. Go to the Compatibility tab
  4. Choose Change settings for all users
  5. Check Run this program as administrator
  6. Select Apply
Borderlands 3 crashes run as admin

3. Make sure your drivers, especially your graphics cards, are up to date

Here’s a list of the official driver download links for the most common drivers used on Windows PCs:

If you are not sure about what driver version you need to download for your PC, we recommend you use dedicated driver updater software such as Fortect Driver Updater.

This tool will automatically match your hardware with its corresponding driver, eliminating the major issues that may come when you install a faulty driver.

Fortect Driver Updater is lightweight and easy to use and it can save you a lot of time and hassle. You can set it up to do regular driver scans and updates.

⇒ Get Fortect Driver Updater

4. Keep your Windows 10 updated to the latest version

Many users are having problems ever since they’ve installed the KB4512941 update.

It would seem that this updating is causing high CPU usage, even when idle.

If you open the Task Manager and see a high CPU usage with the SearchUI.exe process, then you should try this fix:

  1. Open the Registry Editor
  2. Navigate to 
    • ComputerHKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionSearch
  3. Set the BingSearchEnabled value to 1.

Handling registries can be quite risky, so if you don’t know what you’re doing, read this handy guide for the quickest solutions to the issue.

registry editor borderlands 3 crashes

5. Verify your game’s files with the Epic Games Launcher

  1. Open the Epic Games Launcher
  2. Go to your game Library
  3. Hover your mouse over Borderlands 3
  4. Click on the Settings icon 
  5. Select on Verify
  6. Restart the launcher after the verification is complete
Borderlands 3 Epic games Launcher game verify

6. Close any overclocking applications

While overclocking apps may be a gamer’s bread and butter, there have been issues with overclocking apps like MSI Afterburner or the Zotac Firestorm.

Try running the game with your graphics card’s default clock speeds.

There you go, these are a couple of solutions that might help you with Borderlands 3 crashes. If you found our solutions helpful, let us know in the comments section below.

How to Change Bank Card or Add Card on Revolut

Posted on by Tashreef Shareef

Many are wondering how to change a bank card on Revolut and this guide will show you how to do that with ease. So without further ado, let’s get started.

How can I change the bank card on Revolut?

How to add a card to Revolut

  1. On the Home screen, go to Add money.
     add money revolut
  2. Select your currency and tap on Change.
    change revolut
  3. Tap on Add card securely.
    add card securely
  4. Select the card type and follow the instructions on the screen.

If you want to update your card information, you’ll have to remove it by following similar steps and add it again.

Can I get another card on my Revolut account?

Yes, you can have multiple cards on your Revolut account. However, you only add up to 5 new cards per month.

As you can see, you can’t really change your bank card on Revolut, but you can add a new one instead.

Before you leave, find out how to use the Revolut web app, in case you prefer making changes from the desktop.

We also have guides on how to top up Revolut account as well as a guide on what to do if you can’t use your Revolut card online.

Have you changed any details recently? Do let us know your experience in the comments.

How to Close Revolut Account [Step-by-Step Guide]

Posted on by Tashreef Shareef

Revolut is a popular financial startup that operates as a bank but purely on a digital basis through an app. Being a fully digital service, opening a Revolut bank account is easy and takes no more than 10 minutes.

However, what if you want to delete or close a Revolut account or currency account? You may have several reasons to close your Revolut account. You probably don’t like the service, you are not actively using it, and you don’t want to keep your details with the financial firm.

Irrespective of the reason, closing your Revolut account is easy. In this article, we take you through the process of successfully deleting your Revolut account with ease.

Is it easy to close a Revolut account?

Closing your Revolut account is actually easy, as it requires just a couple of steps. You can permanently delete your Revolut currency account from your mobile phone or the official website.

You just need to take of care some requirements which we will list in the next section.

What to consider before deleting your account?

Below are some of the things you need to consider before deleting your account according to Revolut:

  • Remove all funds from your account
  • Ensure that you conclude all pending transactions
  • If you want a live agent to help you close your account, you must be ready to provide the identity document you used for verification
  • You must be on the Free plan. If you are not, you need to change your subscription type
  • If you got any free metal card in the last 3 months, you need to pay a certain amount of money

How can I permanently my Revolute account?

1. Delete the Revolut currency account

  1. Launch the Revolut mobile app or go to the official website and log into your account.
  2. Click the Settings option from the profile in the top left corner of your screen.
  3. Select the Close account option at the bottom of the page.
  4. Finally, choose a motive for deleting your account, and it will be deactivated immediately.

2. Contact a live agent to delete your account

Before deleting your Revolut account, you need to do a couple of things so that you don’t lose any of your money in the process.

According to Revolut, before closing the account, the users should withdraw all currency balances in their account. All transactions (card payments, transfers) must be completed.

This is important because once the account is closed, all the cards linked to the account will be terminated.

Once you have made sure that all the currencies are withdrawn from the account, you need to contact Revolut live agent.

You can find more details about contacting the live agent on the Revolut website or on the app.

The live agents will ask you some security questions before closing the account.

 What’s not deleted?

According to Revolut, the company keeps the user data for 6 years due to financial regulations. However, your account is completely deleted, and no transaction can be made through the concerned account.

That’s it. We have discussed all the steps that you need to take to delete and close your Revolut account safely without any hassle. However, make sure you consider other points in the article before deleting your account.

Similarly, if your Revolut login is not working, check our detailed guide to fix it.

Feel free to let us know if you were able to delete your account or not in the comments below.

Fix Waze not announcing directions with these steps

Posted on by Tashreef Shareef

Waze being a traffic and direction map works with your car’s infotainment system. However, the uses can also use it as a standalone app directly from their phone. Sometimes, you may encounter Waze not announcing direction issues with the app.

You can see similar complaints in the Reddit community about the waze app not announcing directions.

Hello folks, I noticed Waze voice instructions weren’t working in AA a couple of months ago on my Huawei 8X connected to my Pioneer AA head unit – the music volume would duck when the voice commands should have been happening, but there was no guidance.

If you are also troubled by this issue, here are a couple of troubleshooting tips to help you fix waze not announcing directions.

What can I do if Waze is not announcing directions?

1. Check sound output

  1. Restart your phone once before trying any other solutions listed in this article. If that does not work, follow these steps.
  2. Waze has multiple sound output options. You can play the audio output through your phone’s speakers or connected Bluetooth device.
  3. Launch the Waze app on your smartphone.
  4. Tap on Settings and select Voice and Sound.
  5. Make sure “play sound to phone speaks” option is unchecked. If not, uncheck the option.
  6. Relaunch Waze and check if the voice directions are working.

Want to earn points faster in Waze? Check out these tips

2. Clear cache and force close app

  1. If the issue persists, try clearing the bad cache from the app. You may also have to force close and restart the app process to get it to work again.
  2. On your smartphone, tap on Settings. You can access settings from the app drawer or home screen.
  3. Scroll down to Apps section and tap on Manage Apps.
  4. Locate and tap on the Waze app.
    Waze not announcing directions
  5. In the properties window, tap on Clear Data option.
    Waze not announcing directions
  6. Tap on Clear Cache options.
  7. Next, tap on Force Close option at the bottom of the page.
    Waze not announcing directions
  8. Tap on Yes to confirm the action.
  9. Relaunch Waze and check for any improvements.

3. No verbal warning for speed cameras

Waze not announcing directions

  1. If you are not getting any verbal warning for the speed cameras, this is due to you being under the speed limit.
  2. Waze only uses verbal warning to alert the users in case the driver is overspeeding near a speed camera.

4. Reinstall Waze app

  1. If the issue persists, it can be due to a glitch in the app itself. In this case, you may need to reinstall the app to resolve the issue.
  2. From the home screen, tap and hold the Waze app icon.
  3. From the options, select Uninstall. Tap Yes to confirm the action.
  4. Open your Apps Store app and search for Waze.
  5. Download and install the Waze app and check for any improvements.

Reinstalling the app should resolve the Waze not announcing voice direction problem. However, if the issue persists, you can submit a support a ticket on the Waze official forum.

RELATED STORIES YOU MAY LIKE:

FIFA 20 starheads: The place to check player faces [SPOILER]

Posted on by Teodor Nechita

FIFA 20 is all about accurately reflecting (more or less) the current football scene.

This includes the roster of available players for each team, as well as the way they look.

Such would be the beginning of the term Starhead.

What is a starhead?

The definition of a starhead goes as follows:

[…] it occurs when a team is dispatched by EA to football clubs’ training facilities where they sit the team down in their makeshift studio to take a number of photos in which, over time, are applied to a players‘ in-game face. […]

The results are quite outstanding, as they could be considered a version of motion capturing.

There are different types of faces in FIFA. They are the following:

Scanned

When the above-mentioned treatment is applied to a player:

Scanned starhead

Starhead

When a team sent by EA take multiple pictures using a singular camera and  apply them to a players‘ in-game counterpart:

Normal Starhead

Custom

When the player in-game is designed by the graphics team:

Custom starhead

Generic

When a player has an in-game face that is modelled on them without going into great detail.

It would seem that prioritizing who gets scans and starheads is based on the player‘s rating.

Thus, higher-rated players receive scans and starheads first, and far more often afterwards.

As you can see for yourself, the difference in quality is far too great to even bother comparing them.

As such, FIFA players will be thrilled to that over 80 players are getting new starheads, including:

And the list goes on.

Of course, players were quick to respond to these rumours.

Their responses varied, some of which included suggestions regarding who should receive starheads.

Other users suggested that some too many players have generic models and should definitely deserve a scan or at least a starhead.

For more information about starheads, and who’s next in line to get one, visit this dedicated forum thread.

Do you have a favourite player that didn’t get a top-quality starhead?

Let us know in the comments sections below!

Waze Bluetooth not working? Try these solutions

Posted on by Tashreef Shareef

Waze is a popular driving direction and traffic map app that offers the commuters best route in real-time with help from other drivers. Waze is compatible with both Android Auto and Apple CarPlay. That said, sometime, you may encounter Waze Bluetooth not working issue with the app.

Waze Bluetooth not working issue has been reported by many Waze users across the tech forums such as Reddit community.

I recently switched back over to Waze and noticed that my Ford Fusion’s Sync feature does not seem to pick up on Waze’s sound at all. I can even have music playing simultaneously through Sync, but my navigation sound plays only through the phone. Is this a known issue? Is there a workaround at all? I use a Pixel XL phone.

Follow the steps in this article to troubleshoot Waze Bluetooth not working issue in Android Auto and CarPlay.

What can I do if Waze is not connecting to my car?

1. Set Bluetooth as output

Waze bluetooth not working

  1. While Waze should set the output as Bluetooth automatically once connected to the CarPlay or Android Auto, double-check to make sure that the output is set to Bluetooth.
  2. Launch the Waze app.
  3. Tap on Setting > Sound and Voice.
  4. Go to Advanced.
  5. Make sure the Output is set to Bluetooth.
  6. Close and open the Waze app. Check if the app connects to your car.

Add a stop in Waze in just a couple of easy steps

2. Check for update

Waze bluetooth not working

 

  1. The developers tend to released periodic updates to fix bugs and glitches in the app. Make sure you have the latest version installed to fix the issue.
  2. Open Play Store or Apps Store.
  3. Search for Waze and open it.
  4. You should see an Update button if the newer version of the app is available.
  5. Download and install the app. Try connecting the app to your car and check for any improvements.

3. Clear cache and force close Waze

  1. Clearing the old cache can help you resolve Waze Bluetooth not working problem.
  2. From the Home Screen, tap on Settings.
  3. Scroll down to Apps > Manage Apps.
  4. Wait for the device to load all the installed apps.
  5. Locate and tap on Waze to open its properties.
    Waze bluetooth not working
  6. Tap on Clear Data button at the bottom.
  7. Select Clear Cache and then tap on Yes.
    Waze bluetooth not working
  8. Next, tap on Force Close button at the bottom of the page.
  9. Close the Setting page and relaunch the Waze app.

4. Disable power/battery saver

Waze bluetooth not working

  1. Smartphones offer a power-saving feature to increase battery backup. However, it can also create issues with the apps that consistently rely on sending and receiving information like Waze.
  2. Make sure your phone does not have power saver enabled.
  3. To check this, pull the app drawer and check if the Battery saver or power saver option is turned on.
  4. Turn off any power-saving feature and then try connecting your device to the car.

5.  Reinstall Waze

  1. If the issue persists, you may need to reinstall the Waze app. Uninstalling Waze does not delete any data except recent history.
  2. From the home screen, tap and hold the Waze icon.
  3. Select Uninstall and then tap on Yes to confirm the action.
  4. Reinstall Waze from the Apps Store.

RELATED STORIES YOU MAY LIKE:

FIFA 20 Ultimate Team introduces ICON Swaps

Posted on by Teodor Nechita

FIFA 20 Ultimate Team, the most popular mode in FIFA 20 is back for a new season.

This game mode will be coming back with even more exciting features.

In the past, you could purchase ICONs on the Transfer Market or find them in Packs.

In FIFA 20 Ultimate Team they are now introducing ICON Swaps.

What exactly are ICON Swaps?

ICON Swaps is meant to be a new way to allow players to unlock select ICONs in exchange for Player Tokens.

As you all probably remember, you can earn Player Tokens by completing the objectives you exchange.

Official patch notes from EA revealed more about ICON Swaps:

In short, there will be 4 unique versions for each of the 89 ICONs in FUT 20 that will each be available during certain periods throughout the year.

These versions are called:

  • Base
  • Mid
  • Prime
  • Moments

They are inspired by the evolution of a real-life football player throughout his career.

For example, Base reflects a time in the player’s career when they were still new and had not yet reached their full capabilities.

On the other hand, Moments focuses on the highlights in an ICON’s career that elevated them to one of the all-time greats.

When will ICON Swaps become available?

Those eagerly waiting for FIFA 20 to launch will have to wait until the 11th of October for the ICON Swaps features to be available.

As for how long will these versions last, each of them has a different timetable:

Base

  • EA & Origin Access Trial until mid-December 2019 only.

Mid

  • This version will be available in packs from the start of the EA & Origin Access Trial until mid-February 2020 only.

Prime

  • This version will be available in packs from mid-December 2019 until the end of FUT 20.

Moments

  • This version will be introduced into packs throughout February 2020 until the end of FUT 20.

FIFA 20 ICON Swaps timetable

Apparently, the exact purpose of introducing ICON Swaps is to encourage versatility in squad building throughout FUT 20, as well as improve their accessibility and availability.

How to use Google Authenticator with Uplay correctly

Posted on by Teodor Nechita

Uplay is a proprietary game distribution platform created by Ubisoft, similar to EA’s Origin, or Trion World’s Glyph.

You can use it to purchase and download games and DLCs from all of Ubisoft’s known IPs.

However, you can also use it to chat with other players, and read up on news regarding Ubisoft titles.

For security reasons, Uplay requires users to log in using an account name and a password to access their content.

Another good example is the use of the Google Authenticator, where Google sends you a code only you can access to enter Uplay.

Some players have reported issues with the Google Authenticator security app, and would seem that sometimes they are receiving wrong codes.

This issue is preventing them from logging into Uplay, and the gaming community isn’t pleased at all.

Why is Google Authenticator not working on Uplay?

The reasons why Uplay may be having issues with the Google Authentificator are quite simple:

  • The Authenticator code is typed with spaces
  • The time correction for codes is out of sync
  • The date & time is incorrect on the mobile device
  • A common Uplay internal glitch

Use Google Authenticator properly

1. Type the Google Authenticator code without any spaces

Google Authenticator send codes in the form of three numbers, followed by a space and another three numbers.

When this happens, ignore the spaces between the numbers when typing it in.

While a lot of other apps know how to automatically remove spaces in order to recognize a code, Uplay doesn’t.

This means you need to be extra careful when imputing the code.

2. Sync the time corrections for your codes

  1. Open the Google Authentificator app on your mobile device
  2. Go to the app‘s Settings menu
  3. Tap on Time corrections for codes
  4. Tap Sync now and wait for the process to complete
  5. Restart your device, and perform a two-factor authentication again

Google Authentificator Time code sync uplay

3. Set the right time and date on your mobile device

Inconsistency with the time and date may make your time correction codes out of sync.

You can fix this by following these steps:

  1. Access the System app
  2. Navigate to Date & Time
  3. Make sure the Automatic date & time and Automatic time zone are enabled. are active
  4. Restart your device, and perform a two-factor authentication again

Google Authentificator Uplay Automatic time

If none of the solutions mentioned above seem to work, contact the Ubisoft’s support staff to help you in that matter.

FIX: SSD error mismatch detected

Posted on by Vladimir Popescu

Some users have complained that their Intel SSD shows an error saying mismatch detected.

This issue seems to appear on a variety of Intel SSD devices.

In some cases, the error is accompanied by other issues like freezing and lagging, strange file corruption problems, and even failed Windows Update installations.

The error message is being displayed when users run the Full Diagnostics Scan from the Intel SSD Toolbox.

The scan stops at different percentages but shows the same error message: Data Integrity – Error: Data mismatch detected. Contact your reseller or local Intel representative for assistance.

If you’re worried that your SSD might be faulty, that may not be the case. In this fix article, we will explain why that is the case, and also what you can do to troubleshoot this issue.

Read on to find out more details.

Here’s how to solve the SSD mismatch detected error

1. Test your CPU/memory with LinX

motherboard - SSD error mismatch detected
Note: If you are using overclocking on your PC, or your CPU cooler is faulty or low quality, performing this step may cause your CPU to overheat. With modern CPUs, this should not cause any issues, but pay attention to the registered temperatures of your system and abort the process if it exceeds 90C.

  1. Download LinX and extract the files to a folder on your PC.
  2. Make sure to use a non-SSD drive if possible.
  3. Run LinX.exe.
  4. Press Settings -> set the threads to match your CPU thread count (If you use Intel i5 -> set it to 4/ If you use Intel i7 CPU -> set this to 8).
  5. Press the All button -> set the Run option to 10 minutes -> Press Start.
  6. Check the results of your tests and take the appropriate measures.
  7. If the LinX testing lasts more than several hours, then it might mean that your SSD could have a problem.

Want to move Windows 10 to SSD without reinstalling? Here’s how

2. Run MemTest on your PC

ram memory - SSD error mismatch detected
Running the memory test:

  1. Click Cortana -> type Control Panel -> select the first option from the top.
  2. Inside the Control Panel -> choose System and Security from the list to the right of your screen.
  3. Select Administrative Tools.
  4. Scroll down and double-click the Windows Memory Diagnostic shortcut.
  5. Choose the Restart now and check for problems option (this will restart your PC to start the process).
  6. Windows Memory Diagnostics environment will start and it will automatically start scanning for issues in the Standard mode (if you want to change the mode, you can simply press the F1 key and change the scan options to either Basic or Extended).
  7. After modifying the options, press F10 to start the scan.

Checking the results:

  1. Press the Win+R keys and type eventvwr.exe -> press Enter to open Event Viewer.
  2. Expand the folder Windows Logs -> right-click System -> click Find.
  3. Type MemoryDiagnostics-Results -> click Find Next.
  4. Double click the result -> check the results of the test.
  5. If the result reads The Windows Memory Diagnostic tested the computer’s memory and detected no errors -> then you have no issues.
  6. If the results show errors, then it means that your RAM memory could be corrupted, thus creating problems with your SSD.

Conclusion

Please feel free to let us know if this guide has proven useful in your situation by using the comment section below.

READ ALSO:

FIX: Mixer not saving streams

Posted on by Vladimir Popescu

If you see that Mixer is not saving your past streams, aka VoDs (Video on Demand), you should know that you’re not the only one.

A VoD is a recording of a past stream that should be automatically saved on Mixer.

A large number of users have reported the same issue. This has caused a lot of people to get frustrated with the Mixer services.

This problem becomes even more of a nuisance if you’re using Mixer to record your streams to post them on your YouTube channel. This will ultimately result in you losing money, followers, and likes.

Here’s what you can try to make Mixer save past streams

Make sure the past streams option is enabled

laptop on desk with coffee cup - Mixer not saving streams
Even though at first look this notion might seem obvious, a large number of users didn’t perform this step.

This becomes a prevalent issue as the option Keep recordings of my streams is turned off by default.

You will need to perform the following steps every time you create a new Mixer profile. This will allow you to avoid losing any valuable streams.

  1. Log into your Mixer account.
  2. Click your avatar found at the top right side of your screen.
  3. Select Broadcast Dashboard.
  4. Scroll down and toggle the button on for the option Keep recordings of my streams.
  5. Scroll down a bit more and click the Save button.

Note: This option will not work if you enable it while streaming. You will need to apply this setting before starting your streaming in order for the save to take effect.

Can’t sign in on Windows 10? Try these methods out

Conclusion

In today’s fix article we explored the best way to deal with the issue caused by your Mixer account not saving your past streams.

Because this can cause you to lose followers, and even money (if you’re doing streaming professionally), it becomes even more important to deal with this issue.

We hope this guide managed to help you sort out your Mixer problem once and for all.

Please feel free to let us know if it did by using the comment section below.

READ ALSO:

Fix: SSD Won’t Wake From Sleep [Desktop & Laptop]

Posted on by Vladimir Popescu

A great number of users have stormed the different online forums complaining about the fact that their SSD won’t wake up from sleep.

In today’s article, we will explore what are your best options if you find that your SSD won’t wake up from sleep. Please follow the steps carefully.

What can I do if my SSD won’t wake up from sleep?

1.  Perform an ATX reset

1.1. On a desktop computer:

  1. Shut down your PC completely and disconnect all external devices (keyboard, mouse, etc.).
  2. Unplug the power cord from the PC.
  3. Press and hold the power button for 15 seconds (at least).
  4. Connect the power cord but do not plug in the external devices.
  5. Turn your PC on and wait to see if it boots normally. (if it does, shut it down, reconnect all peripherals, and turn it on again).
    desktop ssd wont wake sleep

1.2. On a notebook:

  1. Disconnect all peripherals and unplug the power cord.
  2. Remove the battery and hold the power button for at least 15 seconds.
  3. Plug the power cord in and turn your notebook on (reconnect peripherals only after the boot process is completed successfully).

2. Reset BIOS by removing the CMOS battery

motherboard - SSD won't wake from sleep
  1. Shut down your PC and remove the power cord.
  2. Open up your PC and find the battery on the motherboard.
  3. Remove it, and wait for 5 to 10 minutes.
  4. Put the battery back in, plug the cord in, and turn on your PC.

3. Disconnect all SSD drives and reconnect

  1. Shut down your PC completely.
  2. Disconnect the power cord from the battery.
  3. Open up your PC, and disconnect the SSD from your motherboard.
  4. Wait for a few minutes.
  5. Connect the SSD again, and plug everything back in.
    connect ssd
  6. Start your PC normally.

If all of the above-mentioned methods failed to solve your issue, it is recommended that you try disconnecting your SSD drives and reconnecting them.

In today’s guide, we explored some of the best options to try if your SSD won’t wake up from sleep. Please follow the steps presented here carefully to avoid causing any other issues or getting any injuries.

If your SSD is dead, we have a detailed guide to help you revive it.

Let us know if this guide was helpful by using the comment section below.

Sony TV is Not Responding? How to Fix it if it Freezes

Posted on by Vlad Turiceanu

Sony has some of the best Smart TVs on the market, but many users reported that their Sony TV is not responding, and this can be a huge problem.

This isn’t the only issue that users encountered, and many reported that Bluetooth is not working on Sony TV. However, we solved that in a different guide.

Today we’re going to take a look at what are the steps to follow if your Sony Smart TV becomes unresponsive.

Why is my Sony TV not responding?

  • Interference from one of the external devices.
  • Glitches or other issues with your TV.
  • Issues with your TV settings.

What can I do if my Sony TV is not working?

1. Power reset your Sony Smart TV

  1. First, disconnect any external devices connected to your Smart TV. Remove any external drives, USB drives, Chromecast/Amazon Fire stick, or any other device.
  2. Turn the TV on if it’s not already.
  3. Turn off the TV from the remote or from the device.
  4. Now remove the power cord and wait for a couple of minutes to drain residual power. You can wait longer if you want to make sure that any additional power is drained.
  5. After that, plug in your TV back again. Make sure to connect it directly to a wall outlet. In some cases, bad extension cords or smart plugs can cause power issues with your TV, so bypass them.
  6. Start your Sony TV and check if it works properly.

The power reset is usually used to fix small problems, but it also might help if the TV freezes or is unresponsive.

With the help of this process, the electricity from your unit will be discharged and any error information in the memory will reset to default, making the TV work normally again.

2. Factory reset your Sony Smart TV

  1. Because the Sony Smart TVs run on Android, you can perform a factory reset as you would on any Android powered device.
  2. To start, press the Home button on your remote control.
  3. Now go to Settings.
  4. Under Storage & Reset select Factory data reset.
    fix sony smart tv is not working
  5. Choose Erase everything.
  6. Confirm by selecting Yes.

Keep in mind that this process will delete all of your history, personal data, saved information, and installed apps. After the process ends, everything will return to the factory default settings.

If you can’t access the TV‘s settings, you can perform a forced factory reset. To do that, follow the steps:

  1. Unplug your Smart TV.
  2. Now press and hold down the Power and Down buttons.
  3. While holding the buttons, plug in the TV into an outlet.
  4. Keep holding the buttons for around 30 seconds.
  5. After that, you should see a green LED light. When you see the light, you can release the buttons.
  6. Wait for the process to finish. Your TV should restart multiple times and run through the reset cycle.
  7. When the process is finished, you should see the original Welcome screen.

After following the steps carefully, your Sony Smart TV should work without any more problems.

As we said before, this isn’t the only problem, and many reported that apps have disappeared on Sony TV, but we covered that in one of our other guides.

If you have any other questions about Sony TV not responding, don’t hesitate to leave them in the comments section below and we’ll be sure to check them out.

How to Download GTA San Andreas on PC

Posted on by Teodor Nechita

Want to play GTA San Andreas on Windows 10 or 11? This guide shows where to buy it legally and how to install it safely – no piracy involved.

Table of contents

How to Download GTA San Andreas on Windows 10 / 11

1. Purchase from Rockstar Games Launcher

  • Visit the Rockstar Games official website and download the Rockstar Games Launcher.

  • Within the launcher, you can buy the GTA Trilogy (which includes GTA III, Vice City, and San Andreas) — individual purchase of San Andreas isn’t offered

2. Or Use Steam or Microsoft Store

  • GTA San Andreas is also available on Steam and was previously on the Microsoft Store (Windows Store). The Windows Store version is discontinued and no longer available as a legal purchase

3. Install and Launch the Game

  • After purchase, open the launcher or Steam app, download San Andreas, and install it.

  • Launch and enjoy!


System Requirements & Compatibility

  • GTA Trilogy installations work on Windows 10 and 11 with the launcher or Steam

  • The original version runs on modest hardware (~4–5 GB install size) and supports up to DirectX 9

  • The Definitive Edition (remastered) needs more: ~45 GB storage, 8 GB RAM, and a modern GPU/CPU like GTX 760 and Intel i5‑6600K


Common Issues & Fixes

🛠️ Fix Crashes on Windows 10 and 11

Try these steps:

  1. Run in compatibility mode: Set the .exe to Windows 98/ME mode.

  2. Change in-game resolution to about 1024×768.

  3. Update graphics drivers via Device Manager.

  4. Use a frame limiter (e.g., RivaTuner) to cap FPS at ~30.

  5. Enable Administrator privileges and Background Intelligent Transfer Service.

  6. Keep Windows updated

🎯 Mouse Not Working

  • Set CPU affinity to a single core using Task Manager.

  • Download and place DINPUT8.dll into the game folder.

  • Run the game in compatibility mode (Windows 7/8.1).
    These steps help resolve mouse control and input lag issues on both OS versions

💡 DirectX 9 Required

If you see an error about requiring DirectX 9, enable DirectPlay via Control Panel → Programs & Features → Turn Windows Features on/off → Legacy Components → DirectPlay. Then reboot

Why This Method Works

  • You’re buying from official sources, avoiding malware or illegal downloads.

  • The Rockstar Launcher ensures game updates, safe downloads, and cloud saves

  • Compatibility settings and small file size (~4.7 GB) let the original version run smoothly on older hardware or low-spec laptops


Quick Install Checklist

  1. Download and install Rockstar Games Launcher or open Steam.

  2. Purchase the GTA Trilogy (includes San Andreas).

  3. Install the game, check for DirectX/driver updates.

  4. Apply fixes if needed—compatibility mode, affinity, resolution, DLL file, etc.

  5. Launch and enjoy San Andreas, safely and legally.


FAQs

Can I buy GTA San Andreas individually?
No—only part of the GTA Trilogy package via Rockstar Launcher or Steam

Is the Microsoft Store version still available?
No—Windows Store version is no longer legally available as of today Reddit.

What about download size?
Original version: about 4.5–5 GB. Definitive Edition: up to 45 GB

Will it run on Windows 11?
Yes. Both original and remastered versions support Windows 11 with proper updates and settings

Windows 10 rumor mill heats up with hints of build 19480 for 21H1 (!?) and Windows Sets

Posted on by Radu Tyrsina

This year has been a pretty strange one for Microsoft’s Windows Insider Program. Back in February, Microsoft invited select Insiders to start testing the 20H1 update that will ship in the first half of 2020, and the whole Spring passed the company giving any information about 19H2, the next Windows 10 update that will precede 20H1.

Even though the software giant has yet to say it explicitly, it seems that the company is ready to move to one major Windows 10 update in the Spring, followed by a minor update in the Fall. And it seems that traces of what could end up being 21H1, the major Windows 10 update to be released in the first half of 2021 can already be found in the wild.

Windows 10 build 19480 sighting

Italian blog Aggiornamenti Lumia is reporting today that the Windows 10 build 19480 and newer are mentioned in languages packs available on the Microsoft Store. 19480 represents quite a big jump from the 19H1 build 18985 that Microsoft released for Fast Ring Insiders yesterday.

Windows 10 rumor mill heats up with traces of build 19480 and Windows Sets

Is Sets returning?

WalkingCat, the Microsoft leaker with pretty good track record added a bit more grain to the rumor mill today by hinting that Windows Sets could come back in these advanced builds that could already be tested internally. As a reminder, Windows Sets was a feature that would have allowed Windows 10 users to group together apps, browsers tabs and more in a single window using a tabbed interface.

https://twitter.com/h0x0d/status/1174973635515142145

The Redmond giant removed Windows Sets from 19H1 preview builds last year, and Microsoft’s Joe Belfiore later said at Build 2018 that the feature would come back “when we think it’s great.” We wouldn’t blame you if you had forgotten about the feature in the meantime, and it would be surprising to see Microsoft bring it back. Recent big new Windows 10 features such Cortana, Paint 3D, My People, or Timeline don’t seem to have really resonated with users, and the previous version of Windows Sets that we saw in preview 19H1 builds wasn’t really intuitive, even though it got some love from power users.

Windows 10 Sets

Microsoft’s upcoming Surface event in New York City is right around the corner, and even though hardware should be the main focus, we could well hear more about the future of Windows 10 during the event. The company could also use the event to announce a release date for Windows 10 version 1909 (19H2), as it did last year for the October 2018 Update.

Do this if you experience Borderlands 3 FPS drops

Posted on by Teodor Nechita

Borderlands 3 is an action role-playing first-person shooter video game that is currently at its 4th installment.

Like any sequel, it is far superior to its predecessors in pretty much anyway.

However, more isn’t always better, since players have been reporting that they are experiencing extreme FPS drops.

High-end PC and for the life of me I cannot figure out why the game is having so many FPS issues.

Apparently, these FPS drops happen even when performing the simplest of tasks, such as:

  • Running up to a loot a cache when you open it
  • Opening your inventory
  • Opening a gun chest and view the stats on the weapons

The list goes on and on, but all of these could be considered minor issues.

The real problem is that these FPS drops also happen during combat, making the game incompletable.

What to do in case of Borderlands 3 FPS drops?

1. See if your PC can handle Borderlands 3

While this may seem like a no-brainer, there are players out there that don’t know the minimum system requirements for Borderlands 3.

Given that the game series started back in 2019, a good guess would be that not all fans of the series managed to upgrade their PC since then.

Borderlands 3 FPS drops DXDiag

2. Update your drivers

If your drivers aren’t updated to the latest version, this may explain the occasional FPS drops you may be experiencing.

Keep note that gaming performance is heavily reliant on your graphics driver, so look at them first.

Here are the official driver download links for the most common drivers used on Windows PCs:

Borderlands 3 FPS drops update driver

Need to update your drivers? Update your drivers within minutes with our guide!

3. Update your Windows 10

While not officially confirmed, it seems that a Windows 10 update is to blame for high CPU usage, which could be the cause of your FPS drops.

If you are also experiencing high CPU usage in Task Manager, proceed by doing the following:

  1. Press Ctrl + Shift + Esc
  2. Look for the SearchUI.exe process
  3. Just open the Registry Editor, navigate to:
    • ComputerHKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionSearch
  4. Here you could try to set the BingSearchEnabled value to 1, or you could delete the Search key.

Additionally, if a new update is available for Windows 10, install it right away, as a fix may have been implemented.

Borderlands 3 fps drops windows update

If you’re afraid you may ruin your Windows 10’s registry, look over this useful guide.

4. Check your in-game files

  1. Open the Epic Launcher
  2. Head over to your Library
  3. Hover your mouse over Borderlands 3
  4. Click on the Settings icon next to the Launch icon
  5. Select on Verify
    borderlands 3 fps drops epic games launcher
  6. Restart the launcher after the verification is complete

5. Launch the Epic Games Launcher with administrator rights

  1. Right-click the Epic Games Launcher on your desktop or Start Menu
  2. Select Properties
  3. Open the Compatibility tab
  4. Change all the settings to All Users
  5. Check Run as administrator under the Privilege Level
    fix borderlands 3 fps drops epic games launcher properties
  6. Select Apply

6. Close any overclocking applications

While this may sound a bit counter-productive, many games have been having problems with overclocking apps like MSI Afterburner or the Zotac Firestorm.

Try running the game with your graphics card’s default clock speeds.

borderlands 3 fps drop MSI afterburnerIf you found our article helpful, feel free to let us know by leaving a comment below.

READ ALSO:

Revolut Balance not Updating? Here’s What to do

Posted on by Tashreef Shareef

The Revolut app offers a progressive banking solution to users by keeping their finances safe. The app offers free turbo transfer and unlimited FX volumes. However, sometimes the app may fail to update the balance leaving the users annoyed.

Many Revolut users have reported the Revolut balance not updating issue in the official community forums. Some of the users have reported issues like this:

When opening the app by clicking on a pop-up notification, the reported balance is not updated. The only way to make sure the balance is correctly reported is to force-close the app and start it again.

If you are also troubled by Revolut balance not updating issue, here are a couple of troubleshooting tips to help you resolve the problem.

How to fix Revolut balance not updating

1. Force close and relaunch

  1. If the balance update problem occurs when you open the app using the notification, then it can be a temporary glitch.
  2. On your Android device, tap on Settings.
  3. Scroll down to Apps section.
  4. Tap on Manage Apps option and wait for the installed apps to load.
    Revolut balance not updating
  5. Scroll down and locate Revolut app.
    Revolut balance not updating
  6. At the bottom of the page, tap on Force Close button.
  7. Click Yes when asked for confirmation.
  8. Tap on the Revolut app icon to launch it and check for any improvements.

Clear Revolut app cache

  1. If the issue persists, try clearing the app cache and check again.
  2. From your home screen go to Settings > Apps > Manage Apps.
  3. Locate and tap on the Revolut app.
  4. At the bottom of the page, tap on Clear Data.
    Revolut balance not updating
  5. Select Clear cache and tap on Yes.
  6. Relaunch the Revolut app and check if the balance is updated.

2. Update Revolut app

Revolut balance not updating
  1. The Revolut balance not updating is an old bug and it is possible that the developers have released an update for the same.
  2. Launch Play Store app on your device.
  3. Search for Revolut app and check if any update is available.
  4. Tap the Update button to download and install the latest version of the App.

3. Check for service issues

  1. If none of the functionalities of the app is updating or working, it could be due to service outage at the developer’s end.
  2. You can check the Revolut’s official social media accounts to get an update on the same.
  3. You can also contact support to get a precise response.

4. Reinstall Revolut app

Revolut balance not updating
  1. If the issue persists, try uninstalling and reinstalling the app.
  2. From the Home screen, locate the Revolut app.
  3. Tap and hold the Revolut app icon and select Uninstall from the options.
  4. Tap Yes when asked to confirm.
  5. Open Play Store and download the Revolut app.
  6. After the installation check if the balance not updating problem is resolved.

How to fix Borderlands 3’s steering issue

Posted on by Teodor Nechita

Borderlands 3 is the latest installment in the Borderlands franchise, and it is bigger than ever.

However, like all of its predecessors, it has its fair share of bugs and issues.

Fans are complaining on the Gearbox official forums that they are having problems with their vehicle controls:

I see the controls in the bindings for driving show A and D as steer left/right but in-game they do not. […] Why are the bindings not working? I tried remapping each to A and D again but it didn’t help.

It would seem that players can’t steer their vehicles in Borderlands 3 using the A and D keys, and it is frustrating.

What makes matters even more annoying is that since they cannot steer with the keys, they are forced to steer with the mouse by default.

While mouse steering isn’t all that bad, the guns are on turrets so you should be able to drive one direction and shoot another direction.

Another hassle is looking around to find things while driving, since moving the mouse to look steers you in that direction.

What to do if your A & D keys don’t work for steering?

If you’re a Borderlands fan, your first thought might be to disable mouse steering entirely.

Unfortunately, that option is no longer available in Borderlands 3, so keyboard mapping just got a whole lot harder.

A such, your only solution is to change the control settings in the Gamepad options:

  1. Enter the Gamepad options in your game‘s menu
  2. Scroll down to the Driving Button Scheme
  3. Change it to Vehicle Relative: Left Side

Do not change the controls in any of the other settings within the Gamepad options.

Once you’ve completed these steps, you will now be able to drive with the WASD keys and freelook or aim using the mouse.

Some users reported that after following these steps, the W & S keys no longer for going forward or in reverse.

it worked…but the W/S doesnt work anymore…LOL, even if i rebind the key xD

If this happens to you as well, reset the Gamepad options to their default value, and repeat the steps mentioned above, and nothing else.

This wouldn’t be the first time players are having difficulty changing Borderlands 3’s settings.

However, this is but a minor setback compared to more serious issues plaguing Borderlands players.

Fortunately, Gearbox is actively trying to seek out and fix all of the most common and most serious issues, so players should rest assured.

Waze is not showing any traffic reports? Here’s the solution

Posted on by Tashreef Shareef

Waze is a popular traffic app that gives directions, a live traffic map, as well as road alerts. It is a time-saving app and available on multiple platforms.

However, sometimes the app may stop showing traffic reports. Waze not showing traffic reports are common issues and can occur due to several reasons.

You can find may users complaining about the same in the reddit community forums.

Drive sharing: You can still share a destination with “friends” but they no longer see your live location and an accurate ETA. My only regular Waze friend is my wife, and we use it know who will get home from work first (and take out the dog). I used to know exactly where on her route she was and when she’d be home to the minute. Now, I’ll receive a notification that she’s on her way home or to a store or whatever,  the map doesn’t show her live location anymore and the ETA is wrong- the ETA always shows the current time.

If you are also troubled by this issue, here are a couple of solutions to fix Waze not showing traffic reports problem in your device.

How to Fix Waze not showing traffic reports

1. Try to Clear Waze Cache 

  1. A bad cache can create issues with the traffic reports in the Waze app. Try clearing the Waze app cache and check for any improvements.
  2. Make sure the Waze app is closed.
  3. From your home screen, tap on Settings. You can also access it from the App Drawer.
  4. Scroll down to Apps section. Tap on Manager Apps (anything similar depending on your version of the Android OS).
  5. Wait for all the apps to be loaded. Locate the Waze app in the list and open it.
    Waze not showing traffic reports
  6. Tap on Clear Data option at the bottom of the screen.
    Waze not showing traffic reports
  7. Tap on Clear Cache option and tap OK to confirm the action.
    Waze not showing traffic reports
  8. Next, tap on Force Stop button at the bottom of the screen.
  9. Select OK to confirm the action.
  10. Relaunch the Waze app and check if the error is resolved.

Windows 8, 10 App Check: FlightRadar24, Air Traffic in Real Time

2. Turn on Traffic Layer and Traffic Jams

Waze not showing traffic reports

  1. For the Waze app to update the traffic report automatically, the Traffic Layer and Traffic Jams feature must be turned on.
  2. Launch the Waze app.
  3. Go to Settings > Display Settings > Show on Map.
  4. Make sure the “Traffic Layer and Traffic Jam” options are turned on.
  5. Close and relaunch the app. Check for any improvements.

3. Uninstall and Reinstall Waze

  1. If the issue persists, you may need to reinstall the app. Uninstalling the Waze app will not delete any of the data and history.
  2. On your Home Screen, tap and hold the Waze icon.
  3. Select Uninstall option and then tap on Yes.
  4. Open the Google Play Store app and install Waze.
  5. Launch the app and login with your credentials. The app will restore all of your data from your accounts.

RELATED STORIES YOU MAY LIKE:

4 Ways to fix Waze not connecting to contacts error

Posted on by Tashreef Shareef

Waze is used by most people for a stress-free commute every day. The app offers traffic information and road diversion alerts in advance to save time. Sometimes, the contacts feature in Waze may not work resulting in Waze not connecting to contacts problem.

You can see many users complaining about not being able to see their contacts in the Waze app on Reddit.

Can’t add phone number or friends?
The only option I have in my settings is to connect to Facebook and edit my email address. This is only since I upgraded my phone
Follow the steps in this article to troubleshoot Waze not connecting to contacts problem in your device.

How to fix Waze not connecting to contacts

1.  Check App Permission

  1. If you are on an Android device,  check if the app has required permission to access the contacts.
  2. On your phone, go to Home Screen and click on Settings.
  3. Scroll down to Apps section.
  4. Tap on the Permission option.
  5. Scroll down and tap on Contacts. Wait for the device to load all the apps that have access to your contacts.
  6. Scroll through the apps and check if the Waze app has required permission.
  7. Toggle the switch on the right side to turn on contacts access to Waze.
  8. Close settings.
  9. Relaunch Waze and check for any improvements.

Waze map disappeared? Get it back in a few easy steps

2. Clear Waze App Cache

  1. If the issue persists, try clearing the Waze app cache from the Settings.
  2. Pull the App Drawer and tap on Settings.
  3. Scroll down to the Apps section.
  4. Tap on Manage Apps and let the device load all the installed apps.
  5. Locate and tap on the Waze app.
  6. Tap on Clear Data option at the bottom.
    Waze not connecting to contacts
  7. Select “Clear Cache” option and tap on Yes.
    Waze not connecting to contacts
  8. Tap on the Force Stop button and select Yes.
  9. Relaunch the Waze app and check if the contacts are syncing again.

3. Grant Access to Contacts

  1. If you are using an iOS device, to grant access to your contacts or friends you need to verify your phone number in Waze.
  2. On your iOS device, launch the Waze app.
  3. Tap on Menu and select Settings.
  4. Tap on Account and Login.
  5. Select Phone number. Type in your phone number and tap Send.
  6. You will receive a verification code. Enter the verification code and that should grant access to your contacts.
  7. Relaunch the app and log in.
  8. Tap on the Friends icon in the bottom right corner and tap “Allow access to contacts“.

4. Reinstall Waze

Waze not connecting to contacts

  1. If the issue persists, the issue can be with the app and may require reinstallation.
  2. From the home screen, tap and hold the Waze icon and select Uninstall.
  3. Select Yes to confirm your action.
  4. Open your Apps Store and reinstall the Waze app. Upon installation, Waze will automatically restore your Waze data once you login to the app.

RELATED STORIES YOU MAY LIKE:

How to delete navigation history on Waze

Posted on by Vlad Turiceanu

If you’ve used Waze for some time, you certainly have a lot of searches and want to delete your history.

Every time you do a new search and use that specific search for a route, it will automatically remain in the search history as a valid option for future reference.

This is very helpful if you plan to use the same destination multiple times, but some users want to get rid of their history and it seems that there is no easy way to do it.

Let’s see what are the quickest ways to get rid of your history searches.

How do I remove my Waze search history?

1. Clear the history from the Waze app

  1. Open the Waze app on your Android or iOS device.
  2. In the bottom-left of your screen, tap on the magnifying glass.
  3. Under the Where to? search box you’ll see a list of the most recent searches.
  4. Next to every recent search you’ll see three vertical dots (on iOS three horizontal dots). Tap on them.clear waze search history from the app
  5. A pop-up screen with multiple options will appear. Locate the trashcan icon named Remove and tap on it. remove search history in waze
  6. The recent search will disappear from your recent search history.
  7. Repeat the process for every entry that you want to delete.

This method always works, but it’s tedious and can take a lot of time. If you want a easier method, check out the next solution.

If you want to learn how you can edit the Waze map like an expert, check out this awesome guide.

2. Clear the Waze cache or reinstall the app

clear search history in Waze

  1. Go to Settings on your Android device. You can do that from the drop-down notification panel or the app drawer.
  2. Find Apps & notifications and tap on it.
  3. On the bottom of the screen select See all apps.
  4. Now scroll down until you find Waze and tap on it.
  5. In the App info screen, select Storage.
  6. Tap on the CLEAR CACHE button.
  7. This will clear the Waze app cache and all your search history with it.

As an alternative, after step 4, you can tap on UNINSTALL to make sure that you clear all the cache and the storage. After that, head over to the Play Store, search for Waze, and reinstall the app.

Login with your credentials and you’re good to go.

The same steps can be applied on iOS.

Make sure that before clearing the cache or reinstalling the app, you’re logged in with you’re account and all your settings, preferences, and trips are saved.

Deleting the search history data from time to time is also recommended by senior Waze editors because when Waze returns a search result, it saves the location of the pin in the app.

When you search for the same location, Waze will recommend that specific result from the saved data. This might negatively affect your routing, as you won’t get the most updated map pin.

Waze editors are constantly updating the map pins, and if you don’t clear your history data, you’ll get the old saved pin instead of the new updated one.

READ ALSO:

Dropbox Icon not Showing in Taskbar? Restore it Quickly

Posted on by Vladimir Popescu

If you updated your Windows PC, you might suddenly see that the Dropbox icon is not showing inside your taskbar, even though the process is running.

It is extremely frustrating to need to quickly access your Dropbox settings or files just to find that you can’t do so. Here’s how to tackle this issue and get your Dropbox icon to show inside your taskbar once again.

How can I restore the Dropbox icon if it is not showing on my taskbar?

1. Check permissions in your antivirus software

Even though it is recommended that you use antivirus software on your PC, sometimes programs will not get the required permission to run because of it.

Depending on the specific antivirus software that you use, the steps you need to take will vary.

You will need to make sure Dropbox is whitelisted (allowed to run without interference from the antivirus).

2. Modify taskbar settings

  1. Right-click your Taskbar and choose Taskbar settings.
    Taskbar settings- Dropbox not showing in taskbar
  2. Scroll down to the Notification Area section and choose the Select which icons appear on the taskbar option.
  3. Search for the Dropbox button in the list and turn it on.
  4. This should solve your issue, but if it doesn’t, please try the next method.

Some users have reported that even though the setting was toggled On, the Dropbox icon is still not in the system tray. They turned it off, and for some unknown reason, the icon appeared in the taskbar. Be sure to try this as well.

3. Uninstall and reinstall the application

  1. Press the Windows key + X on your keyboard and select Apps and Features.
    Apps and features - Dropbox not showing in taskbar
  2. Scroll down through the app list and select Dropbox.
  3. Click on the Uninstall button and follow the on-screen instructions to complete the process.
  4. Now, download the latest version of Dropbox (download process will start automatically).
  5. Run the installer package and follow the on-screen instructions to complete the installation.
  6. Check the system tray for the Dropbox icon.

If all the methods mentioned above failed to solve the no Dropbox icon in Taskbar issue, there is one more thing you can try.

Some users have had success in fixing the issue with the Dropbox icon not showing up in their Taskbar by uninstalling and reinstalling the app on their PC.

We have compiled some of the best troubleshooting methods to try and fix the issue caused by your Dropbox icon not showing up in the Taskbar.

Similarly, if the Dropbox sync icon is missing on your PC, check our comprehensive guide to restore it.

Please let us know if you managed to solve the issue by using any of these methods. You can do so by using the comment section below.

How to go invisible on Waze and hide your location

Posted on by Vlad Turiceanu

Waze, among many other features, offers the ability to be visible or invisible on the map.

By default, your profile is visible on the public map. This means that other Wazers, including your friends, can see and locate you on the Waze map based on real-time data.

This is a very useful feature that helps the map to stay constantly updated with location-based information.

But sometimes, privacy-focused users need to drive incognito, without others knowing their location. Well, you’ll be happy to know that you can do that directly from the Waze app.

How do I turn ON/OFF invisible on Waze?

turn on invisible mode in waze

  1. Open the Waze app on your Android or iOS device.
  2. In the bottom-left of your screen, tap on the magnifying glass.
  3. Now tap on your user profile name in the top of the screen.
  4. You’ll see your profile page.
  5. Under your name and points you’ll see the option Go invisible.
  6. By default, when you’re visible, the option is unchecked and gray.
  7. Tap on the switch next to Go invisible to make it green.
  8. You’ll get the message You’re invisible. You appear offline to friends and can’t send reports.
  9. Now you’re invisible and can drive in incognito mode.
  10. To make yourself visible again, follow the same steps and tap on the Go invisible switch to make it gray again.

If you want to learn how you can edit the map in Waze, take a look at this dedicated guide.

Keep in mind that when going invisible, everything will work as usual, except the fact that your friends won’t see you on the map and you won’t be able to send traffic reports.

Your Waze mood and info won’t be available on the public map, and you won’t be able to send messages to your friends and other users.

Other Wazers will continue to see you on the road when you pass by them. Also, it’s worth mentioning that if you have a defined route, you still can send your ETA to anybody, even if you’re in invisible mode.

Invisible mode is very useful when you don’t want your friends to know about your whereabouts, want to make a surprise to someone, or you’re very privacy-focused.

Turning the option ON and OFF is pretty straightforward and you can do it with ease by following the steps in this article.

If you have any other suggestions or questions, drop them in the comments section below.

READ ALSO:

How to Download and Install FFmpeg on Windows 10

Posted on by Milan Stanojevic

FFmpeg is a popular open-source tool that is used to perform several operations on audio and video files. These operations include multiplexing, de-multiplexing, encoding, decoding, filtering, streaming, etc.

It is also used for scaling and rotating videos and extracting information regarding files stored on your Windows PC.

However, the app does not come with a GUI, and that is why users often experience problems while installing FFmpeg. Follow this installation guide if you are wondering how you can install FFmpeg on Windows 10.

How do I install FFmpeg on Windows 10?

1. Download FFmpeg installation files

  1. First and foremost, visit the official website of FFmpeg and hit the Windows logo to download the installation files.
  2. Choose one of the Windows build providers.
  3. Locate the version of FFmpeg that meets your processor and operating system requirements and click the download link. 
  4. Wait until the download process is complete, and unzip the download folder. 
  5. Now right-click the new folder, click rename and type FFmpeg to change its default name.
  6. Right-click the FFmpeg folder and click Copy.
  7. Go to your C drive and paste the FFmpeg folder there. It will allow you to run the FFmpeg commands in the command prompt.

2. Use Environment variables to add FFmpeg to Windows 10 path

  1. To enable FFmpeg in Command Prompt, right-click This PC and select Properties.
  2. Navigate to the top left-hand side of your screen and click Advanced System Settings.
  3. Click the Advanced tab and select the Environment Variables option at the bottom of the window. click environment variables ffmpeg windows 10 how to download & install
  4. Once the Environment Variables window is open, double-click the Path variable under the User variables for lamba section to Edit it. edit path ffmpeg windows 10 how to download & install
  5. Click the New button, paste C:FFmpegbin, and click OK to save the new path. add new path ffmpeg windows 10 how to download & install
  6. FFmpeg files are now added to the system path on your Windows 10 PC. Finally, close the environment variable window to use FFmpeg.

3. Verify the FFmpeg path in Command Prompt

  1. Now you need to check the installation process, press the Windows + S keys, type cmd, and click Run as administrator under Command Prompt.
  2. Once the Command Prompt opens on your screen, type the command below and hit Enter: ffmpeg -version
  3. If FFmpeg is installed on your Windows 10 system, you will see details such as configuration or version number. check version ffmpeg windows 10 how to download & install
  4. However, if the installation is unsuccessful, you will see the following message: ‘ffmpeg’ is not recognized as an internal or external command, operable program or batch file

In this case, check to see if you have properly followed all the steps to add the FFmpeg folder to the system path.

Keep in mind that FFmpeg can encounter various issues, such as Invalid data found when processing input, but we have solutions for it in a separate guide.

Installing FFmpeg can also help with missing avformat-52.dll file, so if you’re having issues with it, be sure to install this software.

We hope that these instructions helped you to install FFmpeg on your Windows 10 system.  If you have any questions, feel free to let us know in the comments section below.

Want to earn points faster in Waze? Check out these tips

Posted on by Vlad Turiceanu

Want to get Waze points faster? Then you’ve came to the right place.

If you didn’t know already, Waze has a points system for contributing to the map. Wazers can add new items to the map and report road hazards to get points and rank up.

As you rank up, things that you edit can’t be modified by other users that are lower rank than you.

Also, points show how much you contributed to Waze and you can compare yourself with other Wazers from your country and worldwide. Let’s not forget bragging in front of your friends.

How can I earn Waze points faster?

1. Get points fast in Waze

get Waze points faster
There are a couple of ways to get points in Waze:

  • First, you can get Driving points by keeping the app running while driving. You get 5 points per mile for Normal driving (3.2 points fro KM), and 16 points per mile for Road munching (10 points per KM).
  • You can also get points by reporting issues on the road. You get 6 points for every Road reporting, 8 points for Gas/fuel price reports, and 3 points for Report comments.

If you want to get more points faster, the most important thing to keep in mind is map editing. Editing the map as much and as often you can will get you a lot of points fast.

You can’t make too many edits on your map? Well, that’s because many objects/items/reports were already done by higher rank editors.

The solution is to drive further to make your map bigger and have a lot more editing area. After you have a bigger map, you can start searching for things that need to be edited.

If you want to check how many points you have, follow the steps:

  1. Open the Waze app on your device.
  2. In the bottom-left of your screen, tap on the magnifying glass.
  3. Now tap on your name.
  4. Here you’ll see your name, points, and when you joined Waze. You’ll also see a lot of other options, including Scoreboard where you can check your level, points, and achievements.

Make sure to complete all the achievements if you want to get a lot of points fast. Some of them are worth between 500 and 1000 points, so there are very important for a quick rank-up.

Depending on your driving points, you’ll also achieve better Waze ranks.

Want to learn how to edit the map faster? Check out the useful tips from this awesome article.

2. How to become a level 2 editor

waze level 2 fast
To become a level 2 editor, you have to complete 1000 map edits. This is a must an can’t be avoided in any way.

If you’re a new editor and want to learn more about Waze and map updates, be sure to check out all the tutorials and information provided on Waze’s official website.

Because a lot of Wazers complain about the inability to level up faster, we recommend to drive more and further to expand your map and get a bigger editable area.

After having a large enough map, be sure to check for edits because you’ll have a lot more now.

If you need to make any changes to locked streets/segments, you can request unlocks on this official Waze website.

Remember that you can always make place updates. The place updates rarely need approval from higher level editors.

Waze is not updating the map? Follow the simple steps from this guide and fix the problem quickly.

Although 1000 map edits sounds a lot, it doesn’t require a lot of time. The plus is that you get familiar with the map, features, and how to make changes fast.

As a reminder, getting points fast or ranking up is not as important as making the right updates and keeping the map complete and accurate.

If you have any other suggestions or questions, feel free to leave them in the comments section below and we’ll be sure to check them out.

READ ALSO:

Windows 10 20H1 Build 18985 brings improved Bluetooth pairing experience to Fast Ring Insiders

Posted on by Radu Tyrsina

Microsoft has finally released a new Windows 20H1 build today, as Fast Ring Insiders can now install the preview build 18985 on their machines. The main new feature in this build is an improved Bluetooth pairing experience, which can now be completed right in the Windows 10 notification panel, no visit to the Settings app necessary.

Unfortunately, Microsoft is continuing to do some A/B testing in the Fast Ring, and this new Bluetooth pairing experience will only be available for 50% of Fast Rings Insiders who will install this new build. Moreover, this improved experience will only be supported on select Microsoft accessories for now, and the list includes the Surface headphones and the Surface Mobile mouse.

The release notes also mention some improvements to how Windows Update will display optional updates (driver updates and Windows 10 updates). Lastly, the Windows team said today that it’s rolling out a new Snip & Sketch app update to all Insiders in the Release Preview ring, plus select users on the Production ring. You can get all the details below:

Improving your Bluetooth pairing experience

For Windows 10 version 1803, we announced a new streamlined experience for pairing supported Bluetooth devices. The idea was simple—if a supported device was nearby and in pairing mode, we’d show a notification that prompted you to go through pairing. This saved you from opening Settings yourself and finding the right place to go. Today, we’re rolling out an update with improvements we hope you’ll like.

Here’s what’s new:

  • Pairing is all done in notifications now. You don’t need to go to the Settings app anymore to finish pairing.
  • For faster pairing time, we improved the UI by showing one less notification.
  • We added a Dismiss button to the first notification to give you more control while using Swift Pair.
  • To make the notification more helpful, now we show the device name and category when we can.

We’re excited for Insiders to try it out and share feedback. This new experience is currently rolled out to 50% of Insiders, and we’ll let you know as the rollout increases. Supported devices include:

  • Surface Ergonomic Keyboard
  • Surface Precision Mouse
  • Microsoft Modern Mobile Mouse
  • Surface Mobile Mouse
  • Microsoft Arc Mouse
  • Surface Arc Mouse
  • Surface Headphones

Improving your optional update experience

As some Insiders have noticed, we’re working on making it easier for you to see all optional updates (including drivers, feature updates, and monthly non-security quality updates) in one place. Once optional updates are detected, they will be listed in a new page under Settings > Update & Security > Windows Update > View optional updates. For drivers, you no longer need to browse Device Manager for a specific device to update. Windows Update will automatically keep your drivers up-to-date, same as before, but if you’re having a problem one of those optional drivers might help.

Other updates for Insiders

Snip & Sketch app update

After spending time in both the Fast and Slow rings, we’re now starting to roll out Snip & Sketch version 10.1907 to 100% of Insiders in the Release Preview ring. We will also be rolling this update out to a small percentage of those using retail builds. As a reminder, this update includes two notable improvements based on your feedback:

  • Single window mode: We’ve heard that some of you prefer your previous snip to close when you click New in Snip & Sketch, so you don’t end up with a bunch of windows. Going forward, this will be the default option. If you liked having multiple windows, don’t worry! That’s still an option too if you go to Snip & Sketch settings.
  • Zoom support: You can now zoom in on your screenshots if they’re a bit too small for you to annotate on (and yes, touch, CTRL+Plus, CTRL+Minus and Ctrl+Mouse wheel are supported!) If you prefer keeping a small Snip & Sketch window, we’ll also zoom out to ensure the whole snip fits in the Snip & Sketch window.

Showing a small Snip & Sketch window, where the screenshot has been shrunk to fit the window.

What snipping improvement would you like us to work on next? Let us know! Fastest way to get to the right place is to select the “…” menu in Snip & Sketch, and then choose Send Feedback.

As usual, this new build also includes some bug fixes and general improvements, and Microsoft has fixed an issue impacting the reliability of Settings when accessing the Network & Internet section. You can learn more about other improvements and known issues in this build on our separate post.

Learn how to edit the map in Waze with these useful tips

Posted on by Vlad Turiceanu

Waze involved the community and its input from day one, and editing the map for more accurate info is one of its biggest strengths.

In many countries, the Waze map imported publicly available road data, but in many cases this data can get outdated pretty fast. That’s where the wazers come in.

Users can add new things to the map, edit the old ones, and keep the map updated and accurate.

If you also want to know how you can edit the Waze map, keep reading to find out all the info that you’ll ever need.

How do I edit my map on Waze?

1. Edit the Waze map from the app

edit waze map in the app
There are a couple of ways to edit the map and add more information. The first step is to update the map from the Waze app on your Android or iOS device.

To do that, first open Waze on your device and then, in the bottom-right corner of your screen, tap on the orange bubble.

Now you’ll see a list of all available reports and changes that you can add.

From here, you’ll be able to add Traffic, Police, Crash, Hazard, and many other reports. To do that, you’ll just have to tap on the report you want to add.

As an example, let’s say that you want to send a Traffic report. Tap the Traffic icon and you’ll be presented with a couple of options. First, you’ll have to choose if the traffic jam is Moderate, Heavy, or Standstill.

This will inform other Wazers about the traffic situation from your current location.

Next, you’ll have the option to take a picture or add a comment, to offer more context to your report. After that, you just have to click on Send and your traffic report will appear on the map.

This process works similarly for the other traffic reports.

There is also the option to add a new place and ask for roadside help from other users, emergency services, or road assistance. When adding a new place, you’ll have to take a picture of it so that other Wazers can easily spot it.

Waze is not updating your map? Check out this useful guide and learn how to fix the issue in no time.

2. Edit the map from the Waze Map Editor (WME)

edit waze map with waze map editor
WME is the default editor for Waze since 2011. It has been updated since, and you can use it to change any information on the map.

Keep in mind that for now, WME is officially supported only on Google Chrome.

First, you’ll have to go to www.waze.com and in the top-right, click on the Live map. After that, in the bottom-right, under the sharing button, you’ll see a orange edit button. Click on it.

Now you’re in the WME. You have the option to Log in or Try practice mode.

After that, you’ll have to go through some tutorials and learn how to properly edit the map. It is very important to learn the basics and watch the tutorials, so please don’t skip them.

After you’ve learned the basics, you can start editing. You’ll just have to log in.

Keep in mind that you won’t be able to edit or modify in any way objects that were previously edited by a user with a higher editing rank than you.

You can edit nearly any object in the editable area including adding/deleting/updating a road segment, rename it or change its direction, change road turn restrictions, add a park landmark or build an overpass, and much more.

To edit/create any object on the map, click on it or click on the item you want to create under the drawing button. For each item you’ll have lots of options to choose from. After you’ve finished, click on the Save button.

For more settings and user preferences, click on the Settings tab in the left pane.

If you want to edit the map faster, there are also a lot of keyboard shortcuts that you can use.

Want to learn how you can easily add a stop in Waze? Follow the simple steps from this guide.

Remember to check all the tutorials on the Waze Map Editor to learn how you can do specific things and create a more accurate and complete map for all Wazers.

If you have any other questions or suggestions, feel free to reach for the comments section below.

READ ALSO:

Add a stop in Waze in just a couple of easy steps

Posted on by Vlad Turiceanu

If you’re using Waze for your daily route or you went on a trip and realised that you have to stop somewhere, you can add a stopover directly in the app.

You don’t have to end your current trip and start a new one just to add a stop. There are a few methods to modify your route without ending it, and today we’ll take a look at them.

How do I add a stop to Waze?

1. Add a stop on Android or iOS

how to add a stop in waze

  1. Open the Waze app on your Android device.
  2. On the bottom of your screen, tap the ETA bar (the one with the estimated arrival, estimated time, and estimated km).
  3. In the new pop-up screen, under your destination, choose Add a stop. You can also tap on the gas or food icon if you want suggested stops along your route.
  4. In the Where to? search box, enter the name of the location where you want to stop.
  5. Now tap on the Add a stop button.
  6. Select Go now to confirm.

If you want to change your final destination with your stopover, choose New drive instead of Add a stop. You’ll see your stop location marked on the map by a blue pin.

After adding your stop, when taping on the ETA bar, you’ll see the estimated time of arrival for both the stop and the final destination.

The same process applies to iOS devices.

Your Waze map disappeared? Check out this awesome guide and learn how to get it back in no time.

2. Add a stop on Android Auto

add a stop in waze on android auto

  1. On the summary screen of your route, select Add a stop.
  2. In the Where to? search box, enter the name of the location where you want to stop.
  3. Now tap on the Add a stop button.

The stopover will be marked on your map by a blue pin.

3. Add a stop by choosing a new destination

add a stop in waze by starting a new route

  1. Open the Waze app on your device.
  2. You can add a stopover by choosing a new destination. If you’ve already started a trip and have a final destination, you can search for a new destination to add it as a stopover.
  3. On your map screen, in the bottom-left of your screen, click on the magnifying glass.
  4. In the Where to? search box, enter the name of the location where you want to stop. Alternatively, you can choose one of your earlier searches marked by a clock icon below the search box.
  5. When you click on a new location, a Navigation options screen will appear with two options: New drive and Add a stop.
  6. Tap on the Add a stop button.
  7. Now select the Go now button.

4. Add a planned route to Waze

how to plan a route with waze
Waze allows you to add only one stop on a route. The ability to add multiple stops and make planned routes is not yet available, despite the fact that wazers are asking for this feature for years.

But there is a workaround to add a planned route to Waze. It can be done by using routing apps and then syncing them with Waze.

The routing app will create your full route and Waze will be used for step-by-step instructions. The most used routing solutions that work with Waze are Route4Me and RoadWarrior.

If you want more alternatives, just go to the App Store (iOS) or the Play Store (Android) and search for route planner. A bunch of apps that can be synced to Waze will appear. Choose your favourite.

As you can see, adding a stop to Waze is pretty easy. The same can be said about planning a route and using Waze, just make sure that the app or service that you use can be synced with Waze.

If you have any other suggestions or questions, don’t hesitate to leave them in the comments section below.

READ ALSO:

Just Cause 4, Dead by Daylight, and TerraTech are free to play with Xbox Live Gold this weekend

Posted on by Radu Tyrsina

Microsoft has just kicked off a new Free Play Days event on Xbox One, and Xbox Live Gold and Xbox Game Pass Ultimate members can now play Dead by Daylight: Special Edition, Just Cause 4, and TerraTech for free through Sunday, September 22. All three games are also on sale during this Free Play Days event: Just Cause 4’s all three editions are 67% off, while Dead by Daylight: Special Edition and TerraTech are both 50% off.

As you may know, Just Cause 4 and Dead by Daylight are both already included in the Xbox Game Pass catalog, so TerraTech may deserve a bit more of your attention this weekend. The open-world sandbox game was released last year on Xbox One, and it lets you design and construct vehicles and battle other cars, tanks and planes.

If you don’t have Xbox Live Gold already, don’t forget that you can get two months of Xbox Game Pass Ultimate for just $2 for a limited time. This new bundle includes Xbox Live Gold, Xbox Game Pass for console as well as Xbox Game for PC.

How to access shared folders in VMware? Try this method

Posted on by Milan Stanojevic

Virtual machines are great tools to share folders between different operating systems such as Windows and Linux.

However, Windows shortcuts and Linux symbolic links might not work correctly if you access them via the shared folder.

Also, you can share folders between virtual machines and the host computer.

It is worth mentioning that you need to install the latest version of WMware Tools on the host operating system to make sure everything will run smoothly.

Moreover, you should not open the same file in multiple applications from different operating systems. Opening a file in this manner might cause corruption.

To avoid this problem and other issues, today we will show you how to access shared folders in VMware.

How to enable a shared folder in virtual machines

In a guest Windows OS, you can view shared files with Windows Explorer. Open My Network Places under VMware Shared Folders to access them.

Alternatively, you can open Windows Explorer and look in My Network Places. Also, it is worth mentioning that My Network Places is called Network Neighborhood in Windows NT.

To make things easier, here is the detailed path to access shared files: My Network Places > VMware Shared Folders > .host > Shared Folders > shared files.

In a Linux virtual machine, you can find the shared folders in /mnt/hgfs/shared files.

Moreover, you can add a new shared folder to your list. It’s easier to do this operation in a Windows host. Simply follow the instructions from the wizard.

To change the settings for a shared folder already on the list, highlight the folder by clicking its name, and then select Properties.

Change the settings you want and then click OK.

Do you need to change the network adapter type of VMware? Here an easy guide for this!

Conclusion

Viewing shared folders on VMware is a useful feature to transfer certain files to a virtual machine. As you can see, you can do that even for the Linux operating system.

Keep in mind to update VMware and don’t open the same file multiple operating systems. Also, the shared folders feature will not work for Windows shortcuts and Linux symbolic links.

Did our article help you access shared folders in VMware? Let us know in the comments section below!

RELATED ARTICLES YOU NEED TO CHECK OUT: