ExpressVPN won’t launch, unable to start service [Fixed]

If ExpressVPN won’t launch in Windows 10 or is unable to start service, you’ll have to take a closer look at your VPN client’s application.

Users also complain about the fact that everything seemed to work just fine and the VPN suddenly stopped launching in Windows 10.

These issues will leave your traffic data unencrypted and you won’t be able to access any geo-locked platforms without the VPN, but we got your back.

Use the solutions below if ExpressVPN won’t launch or see an ExpressVPN engine unavailable message.

Why is my ExpressVPN not opening?

If your ExpressVPN is not starting and instead displays an error message such as Engine Unavailable, Service Unreachable, or Unable to start service, it’s possible that:

  • You run an outdated version of the VPN
  • The VPN application installed on your PC has corrupt files
  • The operating system you have is outdated
  • System permissions prevent the VPN app from running all its essential processes

You can fix all of these within minutes if you follow the correct workarounds.

What can I do if ExpressVPN won’t launch?

  1. Reinstall the ExpressVPN app
  2. Update your ExpressVPN app
  3. Use Command Prompt (Admin)

1. Reinstall the ExpressVPN app

  1. Right-click Start and select Programs and Features.ExpressVPN won't launch / ExpressVPN engine unavailable
  2. Look for ExpressVPN in the list of programs. Once finding it, select Uninstall.
  3. You’ll get a notification after the successful uninstall, so click Close to exit the wizard.
  4. If ExpressVPN is still listed as available after completing these steps, right-click Start and select Run.
  5. Type ncpa.cpl and press Enter to open the Network Connections window.
  6. Under Network Connections, right-click on the WAN Miniport labelled ExpressVPN.
  7. You must now select Delete.
  8. Click Start and select Settings.
  9. Then, click Network & Internet.
  10. Select VPN. If you see ExpressVPN as available, don’t hesitate to delete it.

Even if it sounds tempting enough to go for another VPN from the start, we strongly advise you against any rushed decision.

The first thing to do in this case is to uninstall ExpressVPN from your machine. Once deleted, install the app again and see if it helps.

Use the above steps in that regard and don’t miss your chance to stay anonymous anytime you go online.

A single click is all it takes to be protected when using this Express VPN International Ltd. solution.

ExpressVPN

Don’t hesitate to reinstall this amazing VPN and keep your network data encrypted!
Free trial Visit website

2. Update your ExpressVPN app

Upgrade to the latest version of the ExpressVPN

  1. Sign in to your account.ExpressVPN won't launch / ExpressVPN engine unavailable
  2. Click Set Up ExpressVPN.
  3. Select Windows on the left-side menu and then click Download on the right.
  4. Set up your app.

Set up the app

  1. Find the download file and double-click on it.ExpressVPN won't launch / ExpressVPN engine unavailable
  2. The setup process will begin with a Welcome screen. Click Install.ExpressVPN won't launch / ExpressVPN engine unavailable
  3. If you get a popup dialogue asking you Do you want to allow this app to make changes to your device? Click Yes.ExpressVPN won't launch / ExpressVPN engine unavailable
  4. Wait while the app is being installed on your PC.
  5. During installation, you may be asked to close any running instances of ExpressVPN, click OK to close running instances of ExpressVPN, and proceed with the installation.
  6. You’ll need to install the ExpressVPN TAP driver as part of the app installation process. When you see the Windows Security screen for ExpressVPN Network adapters, click Install.ExpressVPN won't launch / ExpressVPN engine unavailable
  7. You will be notified when the installation process has successfully completed. The app will automatically launch once the process is finished.
  8. Click Close to exit the Setup Wizard and launch ExpressVPN.ExpressVPN won't launch / ExpressVPN engine unavailable
  9. You can also launch ExpressVPN by locating the ExpressVPN shortcut on your desktop and double click the icon to launch ExpressVPN.ExpressVPN won't launch / ExpressVPN engine unavailable

Did this help fix the problem? If not, try the next solution.

3. Use Command Prompt (Admin)

  1. Press Start and type CMD in the search bar.
  2. Look for Command Prompt, right-click and select Run as Administrator.ExpressVPN won't launch / ExpressVPN engine unavailable
  3. On the command prompt, type the following command: net start ExpressVPN service.ExpressVPN won't launch / ExpressVPN engine unavailable
  4. Press Enter.
  5. Launch ExpressVPN again.

Thankfully, there are known and easy quick-fix solutions to help you get by this problem with ExpressVPN not launching on your PC.

Let us know in the comments section below whether any of these solutions worked to fix the ExpressVPN won’t launch issue on your computer.

FIX: The Automation server can’t create object error

Some Internet Explorer users have posted on support forums about an Automation server error that arises within that browser. When those users try to open certain websites in IE, an Automation server can’t create object error message pops up.

One user stated in a forum post:

I am trying to access a website, but whenever I do that I am getting the error Automation server can’t create object… I am using IE 11 and Windows 10.


How can I fix the Automation server error?

1. Enable the Initialize and script ActiveX controls option

This is one of the most widely confirmed fixes for Internet Explorer’s Automation server error.

  1. Open Internet Explorer’s window.
  2. Click the Tools gear button at the top right of Internet Explorer.
  3. Select Internet options to open the window in the shot directly below.
    Internet Options window automation server can't create object windows 10
  4. Click Trusted Sites on the Security tab of that window.
  5. Press the Custom level button.
  6. Select Enable for the Initialize and script ActiveX controls not marked as safe for scripting settings shown directly below.
    Security Settings window automation server can't create object windows 10
  7. Click Yes to confirm your selected setting.
  8. Click OK to exit the window.

2. Enable the script ActiveX control with Group Policy Editor

Alternatively, you can enable the script ActiveX control setting in Windows 10 Pro or Enterprise with Group Policy Editor.

  1. Right-click the Start menu and select Run to open that accessory.
  2. Input gpedit.msc and click OK to open Group Policy Editor.
    Local Group Policy window automation server can't create object windows 10
  3. Double-click Administrative Templates, within Computer Configuration, on Group Policy Editor’s navigation pane.
  4. Then click Windows Components > Internet Explorer > Internet Control Panel > Security Page > Internet Zone within Group Policy Editor.
  5. Double-click the Initiate and script ActiveX controls not marked as safe for scripting policy in Group Policy Editor.
  6. Select Enabled for that policy.
  7. Select the Apply option, and click the OK button to exit.
  8. You’ll need to restart Windows for the new setting to take effect.

3. Reset Internet Explorer

  1. Users have also confirmed they’ve fixed the Automation server error by resetting Internet Explorer. So, open Internet Explorer.
  2. Click Tools to open the menu shown directly below.
    Tools menu automation server can't create object windows 10
  3. Click Internet Options to open that window.
  4. Click the Advanced tab.
  5. Then press the Reset button to open the window in the shot directly below.
    Reset Internet Explorer automation server can't create object windows 10
  6. Select the Delete personal settings check box.
  7. Select the Reset option.
  8. Restart Windows after resetting Internet Explorer.

4. Try browsing with Edge

This isn’t exactly a fix, but you can always browse with Edge instead. Internet Explorer is a dated browser that Microsoft Edge has replaced as the default one for Windows 10.

So, try opening the same websites the Automation server error arises for in Edge instead. The websites might open without any issues in that browser.

Edge browser automation server can't create object windows 10

There aren’t that many confirmed fixes for the Automation server error. However, the resolutions above are widely confirmed to fix that error. So, they’ll probably fix the issue for most users.

Let us know which one worked for you by leaving us a message in the comments section below.



[wl_navigator]

FIX: Security database on the server error

The security database error arises for some users when they try to log in to domain servers with domain accounts via Windows 10. The full error message states:

The security database on the server does not have a computer account for this workstation trust.

Consequently, users can’t log in with domain accounts. However, they can still log in with local administrator accounts.


How can I fix the security database error?

1. Restart your domain connection

Restarting the domain connection is among the most widely confirmed fixes for the security database error.

  1. First, log in with your local administrator account.
  2. Next, press the Windows key + X hotkey to open a menu.
  3. Select Run to open its window.
  4. Input sysdm.cpl in Run’s text box box and click OK to open the window shown directly below.
    System Properties window the security database on the server does not have a computer account for this workstation trust
  5. Press the Change button on the Computer Name tab.
    Domain Changes window the security database on the server does not have a computer account for this workstation trust
  6. Select the Workgroup radio button.
  7. Type WORKGROUP in the text box for that option.
  8. Press the OK option.
  9. Click OK on the dialog box that opens.
  10. Then click OK again on the next Domain Changes dialog box.
  11. Press the Close button on the System Properties window.
  12. Select the Restart Now option on the dialog box that opens.
  13. Thereafter, you’ll need to rejoin the domain.
    • Open the Computer Name/Domain Changes window again.
  14. Select the Domain option.
  15. Then enter your domain name in the text box for that setting, and click the OK button.
  16. Enter you domain administrator account within the login window that opens, and click the OK button.
  17. After rejoining the domain, you’ll need to restart Windows again.

2. Check Windows 10’s date and time settings

  1. Check that Windows 10’s date & time settings (for the client) are right for your time zone.
    • Click the Type here to search button on the left of the taskbar.
  2. Input date in the search box.
  3. Then click Change the date and time to open the Settings window as shown directly below.
    Date & time options the security database on the server does not have a computer account for this workstation trust
  4. If the date and time isn’t quite right for you, select the Set time automatically option if that’s not enabled.
  5. If Set time automatically is already enabled, turn that option off.
  6. Click the Change button.
  7. Enter the right date and time for your time zone in the window shown directly below, and click the Change option.
    Change date and time window the security database on the server does not have a computer account for this workstation trust
  8. In addition, check the Time zone setting is correctly configured.
    Time zone drop-down menu the security database on the server does not have a computer account for this workstation trust

3. Enable Network Discovery

  1. Make sure Network Discovery is enabled. To do so, input cmd in the Type here to search box.
  2. Open an elevated Prompt window by right-clicking Command Prompt and selecting the Run as administrator option.
  3. Then input this command in the Prompt’s window:
    • netsh advfirewall firewall set rule group=”network discovery” new enable=yes.
    • Don’t forget to press the Enter key to initiate the command.
      Network Discovery command the security database on the server does not have a computer account for this workstation trust

4. Reset DNS Addresses

In addition, resetting the DNS addresses might help fix the issue.

  1. Open an elevated Command Prompt as outlined for the third resolution.
  2. Input ipconfig/flushdns in the Command Prompt and press Enter to flush the DNS cache.
    The ipconfig commandthe security database on the server does not have a computer account for this workstation trust
  3. Then type ipconfig /registerdns in the Prompt’s window, and press the Return button.

The above resolutions might fix the security database error so that you can log in with your domain account again. They’re not necessarily 100 percent guaranteed for everyone, but there’s a pretty good chance they’ll fix the issue.

Let us know which of the methods helped you by leaving your feedback in the comments section below.



[wl_navigator]

Fix: The Array Value Could Not be Found Error in Sheets

Google Sheets is among the best freely available spreadsheet app alternatives to Excel. Sheets includes a SUBSTITUTE formula that enables you to replace a specific letter (or text string) in one cell with a word.

The cell that includes the SUBSTITUTE formula can display the replaced text for one cell.

However, the SUBSTITUTE formula can’t display replaced text output for a range of cells. If you include a cell range within it, the formula’s cell will display an Array value could not be found error message as shown in the snapshot directly below.

If you’re wondering how to fix that error so that SUBSTITUTE can be applied to a range of cells, check out the resolutions below.

The An array value error an array value could not be found excel

How can I fix the array value error for SUBSTITUTE?

1. Turn the SUBSTITUTE formula into an array formula

To fix the Array value could not be found error, you need to incorporate SUBSTITUTE within an array formula. An array formula is one that can return multiple output for a range of cells.

Thus, users who need to replace text in range of cells and then display the output in another range need to utilize an array formula.

So, what you need to do is add ARRAYFORMULA to the beginning of the SUBSTITUTE formula. To do that, select the cell that includes the SUBSTITUTE formula.

In addition to optimizing your SUBSTITUTE formulas with ARRAYFORMULA, it’s also important to understand other array methods in JavaScript. Learn more about troubleshooting issues with Array.prototype.map() and arrow functions to enhance your JavaScript coding skills.

You must click in the formula bar, enter ARRAYFORMULA just after the equals (=) sign as shown in the snapshot directly below.

SUBSTITUTE array formula an array value could not be found excel

Then your SUBSTITUTE formula will display replaced text output for a range of cells instead of an array error.

In the example shown in the snapshot directly below, the formula replaces Y in three column cells with Yes and displays the output across three other cells below them.

Cell output for the SUBSTITUTE array formula an array value could not be found excel

2. Enter the REGEXMATCH formula instead

Alternatively, you could combine REGEXMATCH with an array formula for the same output.

  1. To do that, open the Sheet spreadsheet you need to add the formula to.
  2. Select a cell to include the formula in (it will display output across multiple cells).
  3. Then copy this formula with the Ctrl + C hotkey: =ArrayFormula(if(REGEXMATCH(B2:B4,”^Yes|yes|Y|y”)=true,”Yes”)).
  4. Click inside Sheets’ formula bar.
  5. Paste the REGEXMATCH formula into Sheet’s formula bar by pressing Ctrl + V.The REGEXMATCH formula an array value could not be found excel
  6. That formula replaces Y with Yes for the cell range B2:B4.
    • You’ll need the change the Y and Yes text in the formula to whatever you need for it.
  7. In addition, you’ll need to change the cell reference in that formula to match your own requirements.

3. Enter the REGEXREPLACE formula

  1. REGEXREPLACE is another alternative you can try when your SUBSTITUTION formula doesn’t return the expected output.
  2. Open Sheets in a browser.
  3. Select a cell for the REGEXREPLACE formula.
  4. Copy this formula: =ArrayFormula(regexreplace(” “&B2:B4&” “,” Yes | Y | Y “,” Yes”)).
  5. Click within the formula bar, and press the Ctrl + V hotkey to paste the formula.
    The regexreplace formula an array value could not be found excel
  6. Thereafter, edit the REGEXREPLACE formula’s referenced Y and Yes text to whatever text you need to substitute.
  7. Change that formula’s cell reference to meet the requirements of your spreadsheet.

So, that’s how you can fix the Array value could not be found error in Google Sheets. The overall resolution is to combine SUBSTITUTE, REGEXREPLACE, or REGEXMATCH with array formulas so that they display replaced (or substituted) text output across a range of cells.

Let us know if you found this tutorial to be useful by leaving us a message in the comments section below.

What to do if PUBG Lite is Not Available in Your Region

You can click Download on the PUBG Lite website to install the PUBG Launcher for that game. However, PUBG Lite is not available in all regions. However, you can circumvent that problem fairly easy.

How can I fix the PUBG not available in your region error?

1. Check your clock and region system settings

If you are in one of the serviced regions, and still can’t play PUBG Lite, then your laptop’s or desktop’s clock and region settings might not be right.

  1. First, press the Windows key + R hotkey to launch Run.
  2. Enter Control Panel in the Open box, and click the OK button.
  3. Click Clock and Region and Region to open the window shown directly below.
    Formats tab pubg not available in your region
  4. Select your own region (country you’re in) on the Format menu if the right one isn’t selected there.
  5. Click Apply and OK.
  6. Click Date and Time on the Clock and Region Control Panel applet.
  7. Select the Show this clock option on the Additional Clocks tab.
    Date and Time window pubg not available in your region
  8. Select the time zone you’re in.
  9. Select the Show this clock option and your time zone for clock 2 also.
  10. Then click the Apply option.
  11. Click Change time zone on the Date and time tab.
    Time Zone Settings pubg not available in your region
  12. Then select the time zone you’re in on the window directly below.
  13. Click the OK button.

2. Connect to Thailand server with VPN software

Those who aren’t in a PUBG Lite serviced region can still play the game by connecting with a VPN.

  1. First, press the Windows key + S hotkey.
  2. Input time in the Type here to search box and click Change the date and time to open the window directly below.
    The Date & time tab pubg not available in your region
  3. Turn off the Set time automatically option
  4. Toggle the Set time zone automatically option off.
  5. Select (UTC +07:00) Bangkok, Hanoi, Jakarta on the Time zone drop-down menu, which is Thailand’s time zone.
  6. Now you’ll need to install VPN software.
    1. Click Download SoftEther VPN client, which is freeware VPN software, on the VPN Gate client download page.
  7. After installing and opening that software, select VPN Gate Public VPN Relay Servers to open a server list.
    SoftEther VPN software pubg not available in your region
  8. Double-click on a Thailand server with an uptime less than six hours to connect with it.
  9. When connected with VPN server, open the PUBG Launcher to play the game.

So, that’s how you can fix the PUBG not available in your region error to play the game in both non-serviced and serviced PUBG Lite regions. Did you know you can check the PUBG latency to see how strong is your connection to the server?

Then you can sample all the thrills and spills PlayerUnknown’s Battlegrounds has to offer.

How to fix Xbox One error: Your account has been locked

For several reasons, when you try to log in to your Microsoft account on your Xbox One, the your account has been locked 0x80a40014 Xbox error shows up on your screen.

With this error, you cannot get your game data or access your games.

The error comes with no prior warning, and you feel like your Microsoft account is locked for no reason. It may be locked after multiple failed logins or a bug in the system.

Also, the your account has been locked 0x80a40014 Xbox error could show up when you violate Microsoft’s ToS. We won’t dwell on the causes but offer you quick fixes to this issue. Read this guide to the end.


How do I unlock my Xbox One account?

1. Confirm that the Xbox Live servers are onlineconfirm xbox one server status when your Microsoft account locked for no reason

Before proceeding with the other fixes, the first thing you should note is that due to server challenges, Microsoft can block several accounts that give false positives.

You can confirm whether or not this is the case via the Microsoft Xbox Live status website.

The screenshot above shows that there is no issue with the Xbox Live servers. However, if you identify a problem, then it means that the problem is beyond your control.

You can only wait until Microsoft resolves their server problem.

While waiting for the fix, you can still enjoy your Xbox One by putting it on Offline mode.  In this mode, you cannot enjoy multiplayer games or stream or access your digital content.

Learn how to enter the Offline mode in the solution below.


2. Use your Xbox One in Offline mode

  1. Power on your console and open the guide menu by pressing the Xbox button on your controller.
  2. In the guide menu, go to Settings > System > Settings > Network to open the network menu.
  3. Next, from the left panel, click on the Network settings menu.
  4. Select Go Offline and then hit the A button to activate the Offline mode.
  5. If it prompts you to confirm the action, click Yes.
  6. Restart your Xbox One console, and the your account has been locked 0x80a40014 Xbox error will disappear.

3. Delete your profile and perform a power cycling procedure

  1. Power on your console, and once again, open the guide menu by pressing the Xbox button on your controller.
  2. Next, go to Settings > All Settings and press A.
  3. In the Settings menu, click on the Accounts tab and select the Remove accounts option.
  4. After opting to remove your accounts, the next step is to select the profile to delete and confirm it when you are asked to do so.
  5. Next, close this menu and get back to your dashboard.
  6. Now, press and hold the Xbox button on your console until the console is completely off, and the LED no longer flashes.
  7. Finally, power on the console to complete the power cycling procedure.
    • You should see the Xbox animation when the console is about to come on.

4. Reach out to the Xbox support

If you delete your account and perform a power cycling procedure, but then your account has been locked 0x80a40014 Xbox error still does not disappear, you may need to speak with the Xbox support.

Visit the following website https://beta.support.xbox.com/contact-us, click on Ask a question, and let them know that your Microsoft account locked for no reason.

The your account has been locked 0x80a40014 Xbox error pops up randomly, even if you do not remember violating any of Microsoft’s Terms of Service. Microsoft’s support team can help you unlock your account when you reach out to them.

In the meantime, you can follow the steps here to put your console in the Offline mode and cut off yourself from Microsoft’s services to enjoy your games.

Another solution for resolving this issue when it seems your Microsoft is account locked for no reason is to delete your profile and perform a power cycling procedure.

If any of the fixes here worked for you, do let us know in the comments below.



[wl_navigator]

Posted in Fix

How to Fix XPS Print Error: Memory Allocation Failure

Unfortunately, when it comes to printing XPS documents (XML Paper Specification), users have reported the XPS Print Error: Memory allocation failure error.

Mismatch issues oftentimes cause the error in the operating system related to the printer driver. Consequently, the successful solution applied in this case proved to be changing the default XPS driver or class driver with the manufacturer’s PS printer driver or a PCL printer driver.

Note that when you install a printer, if you allow Windows to do all the settings, it will automatically install the XPS driver. 

How do I fix an XPS print error?

1. Install the correct driver from the manufacturer website

  1. On your device, open Settings.
  2. Click on Devices > Printers & Scanners > your printer > Manage Printer >Printer Properties > Advanced tab.
  3. If you don’t see an alternative to the printer driver (i.e. if you did not install PCL or PS driver components during the printer installation) > go to your printer‘s manufacturer site.
  4. Search for the universal printer driver or PostScript driver.
  5. Download and install. Make sure it is the v3 version, not v4, since v3 is more flexible.
  6. During the installation, you might be prompted to provide your IP address so have it at hand.
  7. You might have to reboot the computer.

2. Disable Print to file or Print as image

  1. Assuming you’re already on the Print dialog box, click on the Printer drop-down menu and select the correct printer from the list.
  2. Click on the Properties button next to the printer’s name.
  3. Now, click on the Advanced tab.
  4. Look for an option called Print to file or Print as image and uncheck it.
  5. Click on OK to save your changes and close the dialog box.
  6. Finally, click on the Print button to print your document and see if the XPS Print Error persists.

Additionally, we recommend changing the PDL settings (Printer Drive Language) from PCL XL to PCL 5e (also found in Printer Properties, as shown above).

Many of our readers stumbled across the Memory allocation failure on Kyocera. If you’re in the same situation, follow the highlighted dedicated guide for tested fixes.

We hope that this solution helped you fix the XPS printing error. If you have any further suggestions, please submit them in the comments section below.

Outlook Error 0x80070021: How to Get Rid of it

Error 0x80070021 arises for some users when they try to copy (or back up) Outlook’s PST file to another folder.

Sadly, this isn’t the only issue you can encounter, and many reported Outlook error 0x80040600 as well. Today, let’s see how we can fix the error at hand, shall we?

Why does error 0x80070021 appear in Outlook?

  • Issues with third-party software, such as MS Office Communicator, can cause this problem.
  • Add-ins, such as Search Email Indexer, may lead to this issue in Outlook.
  • In some instances, the startup applications can interfere with Outlook.

How do I fix error 0x80070021?

1. Check if Outlook is running

  1. To check if Outlook is running, right-click your taskbar to select Task Manager.
  2. Select the Processes tab.
    Task Manager Error 0x80070021
  3. Select Outlook if it’s listed under Apps, and press the End task button.
  4. If Outlook isn’t listed under Apps, look through Background processes to check if it’s listed there and then use End task button.
  5. Some users have also confirmed that closing Skype via Task Manager fixes error 0x80070021. So, repeat the above steps for the Skype app.

2. Uninstall MS Office Communicator

  1. To uninstall MS Office Communicator app, press the Windows key + R.
  2. You can open the uninstaller window by entering appwiz.cpl in Run and clicking OK.
    Programs and Features applet Error 0x80070021
  3. If MS Office Communicator is listed in Programs and Features, select that software.
  4. Click Uninstall to remove Office Communicator.
  5. Restart Windows after uninstalling Office Communicator.

After doing that, check if error 0x80070021 is gone.

3. Clean Boot Windows

  1. Open Run, which you can do with the Windows key + R keyboard shortcut.
  2. Input msconfig in Run and press Enter to open the window shown directly below.
    The General tab Error 0x80070021
  3. Click the Selective startup option on the General tab.
  4. Deselect the Load startup items check box.
  5. Select the Load system services and Use original boot configuration settings.
  6. Make sure the Hide all Microsoft services option is selected on the Services tab.
    The Services tab Error 0x80070021
  7. Then click Disable all to deselect all the third-party services.
  8. Click Apply, OK, and then Restart on the dialog box that opens.
  9. Thereafter, copy the Outlook PST after clean booting.
  10. Then you can restore your original startup configuration.

After doing that, check if error 0x80070021 in Outlook is gone.

4. Restart Windows in Safe Mode

  1. To do that, hold the Shift key and click Restart on Windows 10’s Start menu.
    The Restart option Error 0x80070021
  2. After restarting, select Troubleshoot and select Advanced options. Next, go to See more recovery options and choose Startup Settings.
    The Startup Settings option Error 0x80070021
  3. Click the Restart button.
  4. When the Startup Settings list appears, press the 4 key to select Enable Safe Mode.

Once you enter safe mode, check if error 0x80070021 still appears.

5. Remove Outlook’s Search Email Indexer add-in

  1. To remove that add-in, click File in Outlook.
  2. Click Options to open the options window.
  3. Click Add-ins on the left of the window.
  4. Select Com Add-ins on the Manage drop-down menu, and click the Go button.
    Outlook Options window Error 0x80070021
  5. Select the Search Email Indexer add-in, and click the Remove button.

Those are some of the confirmed resolutions for error 0x80070021 that have fixed the issue for Outlook users.

So, the resolutions above will usually fix the error. Aside from those fixes, rolling Windows 10 back to a restore point might also resolve the issue.

We also have to mention that there are many other issues that you can encounter, such as Outlook not sending emails, but we covered that one in a separate guide.

Let us know what troubleshooting steps you used to fix this Outlook issue. Do so by leaving us a message in the comments section below.

FIX: The item can’t be copied USB drive

USB drives have entirely replaced floppy disks as the standard portable storage medium. Even though cloud storage has become a viable alternative, lots of users still utilize USB sticks. Most USB sticks (or flash drives) are formatted with FAT32.

An item can’t be copied error message will pop up for users when they try to transfer files larger than 4 GB to FAT32 USB sticks. The same issue arises on both Windows and Mac platforms, but with different error messages. Those error messages are:

The item <ITEM NAME> can’t be copied because it is too large for the volume’s format.

The file <FILE NAME> is too large for the destination file system.

The first is the Mac error message, and Windows displays the second error message. The issue arises because 4 GB is the max file size limit for FAT32 USB drives. Therefore, users can’t save files larger than 4 GB on USB sticks.


How can I fix the item can’t be copied error?

1. Convert the USB Drive’s format to NTFS

Windows users need to change their USB drives’ formats to NTFS to fix the file is too large error.

  1. First, back up your USB drive (the content will be erased).
  2. Insert the flash drive into the PC’s USB port.
  3. Click the File Explorer taskbar button.
  4. Click This PC on the left of File Explorer.
    This PC the item can’t be copied because it is too large for the volume’s format
  5. Right-click the USB drive and select Format.
    Format USB Drive
  6. Select NTFS on the File system drop-down menu.
  7. Select the Quick Format option.
  8. Click the Start button.

2. Convert the USB Drive’s format to Mac OS Extended (for Mac users)

  1. Mac users can fix the item can’t be copied error by changing their USB drives‘ formats to Mac OS Extended.
    • Make sure you back up you flash drive’s files first.
  2. Insert your USB drive into the Mac.
  3. Open your Mac’s search utility.
  4. Enter disk utility in the search box.
    The Mac search tool the item can’t be copied because it is too large for the volume’s format
  5. Then click Disk Utility to open that tool.
    Disk Utility window the item can’t be copied because it is too large for the volume’s format
  6. Select the connected USB drive on the left of the window.
  7. Click the Erase option.
  8. Select OS X Extended (Journaled) on the drop-down menu.
  9. Press the Erase button.
  10. Click Erase again if you need to confirm.

3. Compress the file

If the file you’re trying to transfer to a USB stick isn’t much larger than 4 GB, you might be able to compress it to less than 4 GB.

After reducing a file to less than 4 GB, you can save it on the FAT32 USB drive without needing to change the USB storage.

You can compress videos with numerous software and web utilities. The video compression software post provides further details for some of the best Windows 10 video compression software.

To compress other file types, check out the best file compression tools post.

Any Video Converter the item can’t be copied because it is too large for the volume’s format

So, that’s how you can fix the item can’t be copied and the file is too large errors on Mac and Windows platforms.

The resolutions are similar for both Mac and Windows platforms, except that you need to covert the USB drive to different file systems.


[wl_navigator]

Windows 10/11 Personalization Won’t Open? Try These Fixes

The Personalize feature in Windows 10 allows the users to customize their desktop. You can change the desktop background, customize colors, lock screen, themes , and more. Some users have reported that Windows 10 won’t open personalize from the desktop issue.

According to a user report in the Microsoft Community, after right-clicking on the desktop and select Personalize an error message pops-up.

I have Windows 10 Insider Preview build 10074, and when I try to personalize, (Right click desktop screen > Personalize) It won’t open.

If you are also troubled by this error, here are a couple of troubleshooting tips to help you fix Windows 10 won’t open personalization in Windows.


How do I fix the Windows 10 personalization issue?

1. Check Windows activation

Windows 10 won't open personalize
  1. One reason why some functionalities of Windows may not work is that the Windows version is not activated.
  2. Click on Start and select Settings.
  3. Go to Update and Security.
  4. From the left pane, click on Activation.
  5. On the right side, check if the “Windows is activated” message is displayed. If it says Windows is not activated, you may have to activate your license to access the Personalize option.

Want to block all Windows 10 processes, except one? Check this guide out


2. Check for pending updates

Windows 10 won't open personalize
  1. Microsoft periodically releases new updates to fix bugs in the OS. Check if any updates are pending and require installation.
  2. Click on Start and select Settings.
  3. Go to Updates and Security.
  4. Click on Windows Updates.
  5. Check if any updates are available for download.
  6. If not, click on Check now to find available updates.
  7. Download and install any pending updates.
  8. Check if the Windows 10 won’t open personalize issue is resolved.

3. Try System Restore Points

Windows 10 won't open personalize
  1. When enabled, Windows automatically creates a system restore point. If the issue occurred after installing an update or app, you can use Restore Point to restore the PC.
  2. Press the Windows key and type restore in the search bar.
  3. Click on the “Create a Restore Point” option.
  4. In the System Properties window, click on “System Restore” button.
  5. Click Next to proceed.
  6. Check the “Show more restore points” box. This will display all the available restore points.
  7. Select the most recently created restore point and click Next.
  8. Read the on-screen message and click on Finish to proceed.
  9. Wait for the system to restore the computer to the earlier point when it was working without any issues.
  10. After the system restore is complete, check if you can open Personalize in Windows 10.

4. Reset this PC

Windows 10 won't open personalize
  1. If the issue persists, try resetting the PC. There are two options to reset your PC.
  2. Click on Start > Settings.
  3. Go to Recovery.
  4. Under “Reset this PC” click on Get Started.
  5. Under “Choose an option” you have the following options:
    Keep my files: First, select this option. It will uninstall the apps and settings but will keep your personal files.
    Remove everything:  If the first option doesn’t work, select this option. This will remove all of your apps, settings, and personal files and the PC will be reset to factory settings.
  6. Once done, right-click on the desktop and select Personalize.

In case the issue persists, you may have to fresh install Windows 10. Create a bootable USB drive and perform a clean install.

Microsoft acknowledges update KB4556799 connectivity bug

Microsoft confirmed the existence of an update KB4556799 connectivity bug. When the company released the CU weeks ago, it meant to fix a couple of Windows 10 issues, including app security.

But as always, things did not go according to plan, and users started complaining about errors with the update. Some of the earliest complaints touched on issues like installation failure.

Microsoft’s looking into the KB4556799 connectivity bug

Some users are still reporting being unable to connect to the internet after installing KB4556799.

If you are experiencing this issue, you can breathe a sigh of relief. Microsoft is now aware of it, and is working to resolve it.

After installing this update on a Windows 10 device with a wireless wide area network (WWAN) LTE modem, reaching the internet might not be possible. However, the Network Connectivity Status Indicator (NCSI) in the notification area might still indicate that you are connected to the internet.

At the same time, the company confirmed having seen social media and news reports about multiple KB4556799 issues.

One Reddit user recently shared their awful experience with the update to the Windows Subreddit. The user reported performance issues, including browser crashes, after installing build CU KB4556799.

Another user got error 0x800f0988 after attempting to install the CU. When this bugshows on your screen, you just cannot install the update without fixing it first.

Still, other Windows 10 users have reported audio and graphics issues after installing the May 12, 2020 update.

It may be interesting to note that Microsoft’s official customer feedback channels are not receiving a lot of these complaints. Most likely, affected users are sharing their concerns through social media without directly engaging the Redmond-based corporation.

The company, though, said it is actively engaging customers who have raised any issue with the update.

Are you are still getting error 0x800f0988 when you attempt to install KB4556799 files? Try these easy steps to solve the problem.

Meanwhile, if you’ve discovered any Windows 10 update bugs lately, let us know via the comments section below.

[wl_navigator]

FIX: The sample rate for your microphone isn’t supported

Some Xbox app (now Xbox Console Companion) users have started threads on Microsoft’s forum about a microphone error that arises for that app.

When those users try to set up a party within the Xbox app, it displays an error message that states:

The sample rate for your microphone isn’t supported. Here are some potential resolutions for users who need to fix the Xbox app’s microphone isn’t supported error.


How do I fix the microphone sample rate error?

Your microphone isn't supported error message the sample rate for your microphone isn't supported

1. Open the Recording Audio troubleshooter

  1. First, try fixing the microphone isn’t supported error with the Recording Audio troubleshooter.
    • Click Windows 10’s Type here to search taskbar button to open its search tool.
  2. Input troubleshoot in the search utility’s text box, which finds Troubleshoot settings.
    • Click Troubleshoot settings to open that tab.
      Troubleshoot tab the sample rate for your microphone isn't supported
  3. Select Recording Audio on the Troubleshoot tab.
  4. Press the Run the troubleshooter button for Recording Audio.
  5. Select the microphone you need to fix the issue for.
    Recording Audio troubleshooter the sample rate for your microphone isn't supported
  6. Thereafter, the troubleshooter will open and might provide a potential fix. If so, click the Apply this fix option.

2. Check microphone permissions for the Xbox app

  1. Check that the Xbox app has the required microphone permissions.
    • Enter the keyword microphone permissions in the search utility.
  2. Select Choose which apps can access the microphone to open Settings as in the snapshot directly below.
    Microphone app permission settings the sample rate for your microphone isn't supported
  3. Toggle the Xbox Console Companion’s microphone permission on if it’s off.

3. Reinstall the microphone’s drivers

Try reinstalling your microphone’s drivers.

  1. To do so, launch Run with the Windows key + S keyboard shortcut for it.
  2. Input mmsys.cpl in the Open text box and click OK.
  3. Click the Recording tab on the Sound window that opens.
    Recording tab the sample rate for your microphone isn't supported
  4. Select your microphone on that tab.
  5. Click Properties to open the window in the image directly below.
    microphone properties window the sample rate for your microphone isn't supported
  6. Press the Properties button within the Controller Information box on the General tab.
  7. Then click the Driver tab on the next properties window that opens.Driver tab
  8. Click the Uninstall Device option.
  9. Press the Uninstall button on the dialog box that opens.
  10. Thereafter, click the Restart option on your Start menu.
    • Then Windows will install a generic microphone driver.

4. Reset the Xbox app

  1. Some users might need to reset Xbox Console Companion to fix your microphone isn’t supported error.
    • Open the Type here to search box.
  2. Enter apps & features in the search utility.
  3. Click Apps & features to open the Settings apps as shown directly below.
    the Apps & features tab the sample rate for your microphone isn't supported
  4. Click Advanced options for the Xbox Console Companion app.
  5. Click the Reset button, and click Reset again to confirm.
    The Reset button the sample rate for your microphone isn't supported
  6. Restart Windows after resetting the app.

5. Fix Xbox networking

  1. To do so, enter Xbox networking in Windows 10’s search box.
  2. Then click Xbox Live Settings to open the window shown directly below.
    The Fix it button the sample rate for your microphone isn't supported
  3. Click the Fix it button.

6. Update Windows 10 to latest version

Some users have also confirmed they fixed the microphone isn’t supported error by updating Windows 10 to the latest build version. T

  1. o do that, open the search utility.
  2. Enter update as the search keyword, and click Check for updates.
    Check for updates button the sample rate for your microphone isn't supported
  3. You might see a Download and install now option on the Windows Update tab for the latest available build update.
    • If so, click the Download and install now option.
  4. If a Download and install now option isn’t there, click the Check for updates button.

So, that’s how you can fix the microphone isn’t supported error in Windows 10 and 8.1.

The above resolutions aren’t 100 percent guaranteed, but there’s a good chance they’ll fix the issue for most users.


[wl_navigator]

Fix: Comdlg32.ocx Error in Windows 10/11

The comdlg32.ocx file is an ActiveX control for Visual Studio 6. Thus, it is part of the Visual suite, and numerous programs need it.

Some software might display this error message when users try to launch them: Component comdlg32.ocx or one of its dependencies not correctly registered: a file is missing or invalid.

That error arises when the comdlg32.ocx file a program needs is missing or corrupted.

How can I fix the comdlg32.ocx error?

1. Download a new comdlg32.ocx file

Users have fixed the comdlg32.ocx error by downloading a new comdlg32.ocx file to replace a missing or corrupted one.

  1. To do that, download the comdlg32.ocx file (click that link).
  2. Open File Explorer (press the Windows key + E).
  3. Open your download folder in File Explorer.
  4. Right-click the comdlg32.ocx file and select the Copy option.
  5. Open this path on 64-bit Windows platforms:
    • C:>Windows>SysWOW64. On 32-bit Windows, open this folder: C:>Windows>System32.
      SysWOW64 folder error comdlg32.ocx windows 10
  6. Right-click within the folder to select Paste, which will copy the comdlg32.ocx file into the open folder.
  7. Press the Windows key + R keyboard shortcut, which will open Run.
  8. Input cmd in the Run accessory, and press the Ctrl + Shift + Enter key.
  9. For 64-bit Windows platforms, enter the command shown in the snapshot directly below.
    • Remember to press the Return key after entering commands.
      regsver32 command for 64-bit Windows error comdlg32.ocx windows 10
  10. Those with 32-bit platforms will need to enter the command in the image directly below.
    regsver32 command for 32-bit Windows error comdlg32.ocx windows 10

2. Reregister an existing comdlg32.ocx file

If the comdlg32.ocx is not missing, try reregistering the current file. To do so, open the Command Prompt as administrator. Then enter regsvr32 comdlg32.ocx in the Prompt, and press the Return key.

register ocx command error comdlg32.ocx windows 10

3. Run the software in compatibility mode

Try running the software the error arises for in compatibility mode.

  1. Right-click the icon for the program that returns the comdlg32.ocx error message and select Properties.
  2. Click the Compatibility tab in the window that opens.
    Compatibility tab error comdlg32.ocx windows 10
  3. Select the Run this program in compatibility mode for check box.
  4. Select an older Windows platform than your current one.
  5. Click the Run this program as administrator option to select it.
  6. Select the Apply option, and click OK to close window.

4. Reinstall the software

Reinstalling the software the comdlg32.ocx error arises for might also fix the issue for some users.

  1. To do so, open Run.
  2. Open the uninstaller window by entering appwiz.cpl in Run and clicking OK.Programs and Features applet error comdlg32.ocx windows 10
  3. Select the software you need to fix the comdlg32.ocx error for.
  4. Click Uninstall and Yes to remove the software.
  5. Restart Windows before reinstalling the software.
  6. Then reinstall the latest version of the uninstalled software.

Those are a few of the resolutions users have confirmed to fix the comdlg32.ocx error. Running a system file scan and rolling Windows back to a restore point might also fix the comdlg32.ocx error.

The article above contains plenty of troubleshooting steps, but we would like to know which one helped you the most. Please let us know by leaving a message in the comments section below.

FIX: There are no fixed disks to show in Diskpart

The DiskPart utility helps the users to manage their PC’s drives. However, sometime when using the tool you may encounter the ‘There are no fixed disks to show’ DiskPart error.

This error can occur due to multiple reasons including an improperly connected HDD, missing drivers or even corrupted BCD data.

If you are also troubled by this error, here are a couple of troubleshooting tips to help you resolve the ‘There are no fixed disks to show’ DiskPart error in Windows.

How do I fix There are no fixed disks to show DiskPart error?

1. Check your HDD for a loose connection

There are no fixed disks to show
  1. If you recently made any hardware modifications to your computer, you may want to check if the HDD connections are properly connected.
  2. Turn off your computer and make sure you disconnect the system from any power source.
  3. Access the computer internals and unplug the hard drive.
  4. Restart your computer and wait for the system to detect no hard disk is connected.
  5. As soon as you get an error saying no hard disk is connected, turn off the computer and connect your hard disk.
  6. Make sure you have connected them firmly.
  7. Once done, reboot the computer and check for any improvements.

Want to free up Hard Disk space on Windows 10? Check this guide out


2. Rebuild MBR

DiskPart error
  1. Find a working Windows PC. Borrow from your friend if you don’t have a second computer.
  2. Download the hard disk partition tools AOMEI Partition Assistant Standard.
  3. Plugin a USB flash drive to your computer (the one on which the partition tool is downloaded). Make sure the USB flash drive has sufficient space.
  4. Launch AOMEI Partition Assistant and click on Make Bootable Media from the left pane.
  5. Click Next.
  6. Select the USB Boot Device option and select your USB flash drive.
  7. Click Proceed.
  8. Click Yes to confirm the action.
  9. Once the Bootable drive is ready, unplug the USB drive.

Rebuilding MBR

DiskPart error
  1. Connect the bootable USB flash drive to the computer with the error.
  2. Restart the computer.
  3. Make sure you boot from the connected bootable drive. If required, change the boot order in BIOS.
  4. Next, you will boot into AOMEI Partition Assistant’s main interface.
  5. Right-click on the system disk (where the Windows is installed) and select Rebuild MBR.
    DiskPart error
  6. In the Rebuild MBR window, click the drop-down menu for Set the type of MBR for the current OS and select the correct version of your OS.
  7. Click OK to proceed.
  8. Click Apply and Proceed to complete the process.
  9. Once the process is complete, unplug the USB drive and restart the computer.

3. Check for corrupt Boot Configuration Data

There are no fixed disks to show
  1. Boot from a bootable flash drive or Windows installation media. If you don’t have an installation media, here is how to create one.
  2. Once on the installation screen, click on Repair your computer.
  3. In the Advanced Options screen, click on Command Prompt.
  4. In the Command Prompt window, enter the following command and hit enter to execute:
    Bootrec /scanos
    Bootrec /fixMBR
    Bootrec /fixBoot
    Bootrec /rebuildBCD
  5. Make sure you execute all the commands one by one.
  6. Close the Command Prompt once the command is executed and restart the computer.

4. Perform Windows Startup Repair

There are no fixed disks to show
  1. Insert the Windows installation DVD or flash drive and restart your computer. If you don’t have an installation media, check Method 2 – step 1.
  2. When the message Press any key to boot from CD or DVD appears, press any key.
  3. On the installation screen, click on Repair your computer in the bottom left corner.
  4. Next, select Troubleshoot > Advanced Options.
    DiskPart error
  5. Select the Automatic Repair option.
  6. Choose the operating system to proceed.
  7. Windows will scan the system for any issues and corrupt system files that may require repairing.
  8. Once done, restart your computer and check for any improvements.

The ‘There are no fixed disks to show’ DiskPart error occurs if the system detects issues with the hard drive or if the Windows installation is corrupt. Follow all the steps in this article to resolve the computer to resolve the issue.

However, if the issue persists, check if the hard disk is damaged or corrupted. You can do that by connecting the hard disk to another computer and trying to boot from it.

FIX: The access control entry is corrupt error

The access control entry is a corrupt error that can arise for some users when trying to change the owners for folders via Advanced Security Settings. One user said this in a forum post:

So I was trying to change the (folder) owner in the Advanced Security settings… When I go into the Permission Entry for that specific owner, it shows the error message, This access control entry is corrupt.

These are some of the confirmed resolutions for the access control entry is corrupt error.


How do I fix the access control entry error?

1. Run a system file scan

  1. First, try running a System File Checker scan, which might, or may not, fix the issue.
    • Open the Run accessory by pressing the Windows key + R keyboard shortcut for it.
  2. Type cmd in the Open text box, and press the Ctrl + Shift + Enter key combination.
    • Click Yes on the UAC prompt that might open.
  3. Before initiating the SFC scan, enter DISM.exe /Online /Cleanup-image /Restorehealth; and press the Return key.
  4. Thereafter, enter the sfc /scannow command and press Return to run an SFC scan.sfc /scannow command Access Control Entry is Corrupt’ Error on Windows
  5. When the SFC scan is done, restart Windows if the scan repaired files.

2. Close all Universal Windows Platform apps

  1. If the first resolution doesn’t fix the access control entry error, try closing all UWP (Universal Windows Platform) apps with Task Manager.
    • Right-click your taskbar and select Task Manager on the menu.
  2. On the Processes tab, close everything listed under Apps.
    • You can do that by right-clicking apps and pressing the End task button.
  3. Have a good look through Background processes for any processes that might be for UWP apps.
    • Close all background processes for UWP apps listed there, such as Calculator, Mail, Edge, Photos, Candy Crush, etc.
      The Task Manager Access Control Entry is Corrupt’ Error on Windows
  4. Thereafter, close Task Manager. Then try to adjust the permissions for the folder the error arises for.

3. Take full ownership of the folder

This is one of the most widely confirmed fixes for the access control entry error.

  1. First, right-click the folder you need to fix the error for and select Properties.
  2. Then select the Security tab.
    Security tab Access Control Entry is Corrupt’ Error on Windows
  3. Press the Advanced button on the Security tab.
    Advanced Security Settings window Access Control Entry is Corrupt’ Error on Windows
  4. Next, click the Change option to open a Select User Group window.
    Select User or Group window Access Control Entry is Corrupt’ Error on Windows
  5. Enter Users within the object names text box.
  6. Press the Check Names button, which will modify the syntax a bit.
  7. Click the OK button to close the Select User Group window.
  8. Click Apply to save the changes.

Those are three of the best ways to fix the access control entry error. Users who have fixed the same error with other methods are welcome to share their fixes below.



[wl_navigator]

FIX: Windows Update error 0x800700d8

Error 0x800700d8 is one of numerous Windows Update error codes. The error 0x800700d8 messages states:

There were problems installing some updates, but we’ll try again later.

Consequently, users can’t install certain updates when error 0x800700d8 arises. The potential fixes for that issue are pretty similar to other Windows Update error codes that share the same error message.


How do I fix Windows 10 error 0x800700d8?

1. Run the Windows Update troubleshooter

Some users have said that the Windows Update troubleshooter can fix error 0x800700d8.

  1. To open that troubleshooter, click the Type here to search taskbar button.
  2. Enter troubleshoot in the Type here to search box.
  3. Then select Troubleshoot settings to open a list of troubleshooters in Settings.
    Troubleshoot tab Fix Error 0x800700d8 on Windows 10
  4. Select the Windows Update troubleshooter.
  5. Click Run the troubleshooter to open the Windows Update troubleshooter.
    Windows Update Fix Error 0x800700d8 on Windows 10
  6. If the troubleshooter provides a resolution, click Apply this fix.

2. Uninstall third-party antivirus software

There might be a third-party antivirus utility blocking Windows updates from installing.

  1. Right-click your Start button to select Run.
  2. To open the Windows uninstaller, enter appwiz.cpl in Run and click OK.
    Programs and Features applet Fix Error 0x800700d8 on Windows 10
  3. Select your third-party antivirus utility.
  4. Click the Uninstall option.
  5. Select the Yes option to confirm.
  6. The antivirus utility might leave behind some residual files.
    • The How to remove software leftovers guide provides further details for erasing residual files.

Before uninstalling an antivirus utility, you can try disabling it first. To do so, right-click the antivirus utility’s system tray icon and select a disable or turn off option on its context menu.

If that doesn’t fix error 0x800700d8, uninstall the antivirus software to ensure it isn’t blocking updates.


3. Turn off deferred upgrades

Some users have confirmed they’ve fixed error 0x800700d8 by turning off deferred upgrades in Windows 10.

  1. Press the Windows key + S keyboard shortcut to open the Type here to search box.
  2. Enter the keyword Windows Update in search box.
  3. Then click Windows Update settings to open the window shown directly below.
    The Windows Update tab Fix Error 0x800700d8 on Windows 10
  4. Click the Advanced options to open further update settings.
    Advanced options Fix Error 0x800700d8 on Windows 10
  5. In more recent Windows 10 versions, you’ll need to select 0 values in both the Choose when updates are installed deferral drop-down menus.
  6. In older Windows 10 builds, you’ll need to uncheck a selected Defer upgrades check box.
  7. Restart Windows after disabling deferred updates.

4. Reset Windows Update components

  1. Reset Windows Update components can fix WU glitches.
    • Open Windows 10’s Type here to search utility.
  2. Enter cmd to search for the Command Prompt.
  3. Right-click Command Prompt to expand a context menu on when you’ll need to select Run as administrator.
  4. Next, enter these commands separately and press Return after each:
    net stop wuauserv
    net stop cryptSvc
    net stop bits
    net stop msiserver
  5. Press the Windows key + E hotkey to open File Explorer.
  6. Go to C: > Windows in File Explorer.
  7. Right-click the SoftwareDistribution folder and select Rename.
    The SoftwareDistribution folder Fix Error 0x800700d8 on Windows 10
  8. Enter SoftwareDistribution.old as the new title for that subfolder, and press the Return key.
  9. Open the C: > Windows > System32 folder in File Explorer.
    catroot2 folder Fix Error 0x800700d8 on Windows 10
  10. Then right-click catroot2 and select Rename to change its folder title to Catroot2.old.
  11. Open the Command Prompt as administrator.
  12. Input these commands to restart the previously stopped services:
    net start wuauserv
    net start cryptSvc
    net start bits
    net start msiserver
  13. Restart your desktop or laptop after resetting Windows Update.

Those potential resolutions for error 0x800700d8 are worth a shot. Note that you can manually download required updates from the Microsoft Update Catalog.

Enter the KB numbers for updates in the search box there, and then install any downloaded updates. You can also utilize the Update Assistant to update Windows 10 to a new build version.

Let us know if the solutions above helped you by leaving us your feedback in the comments section below.



[wl_navigator]

FIX: iTunes error 9006 on Windows 10/11

Many users reported iTunes error 9006 on their Windows 10 PC. This error usually appears when trying to download something from Apple’s servers, and in today’s article, we’ll show you how to fix it.


What to do if iTunes error 9006 appears on Windows 10?

1. Use a different USB port or USB cable

iTunes error 9006 can appear while downloading files to your iOS device. To fix this issue, users are suggesting to connect the iOS device to a different USB port and check if that works.

In addition, you might want to try using a different USB cable and check if that helps. Also, it’s advised to use Apple-certified cables for the best results.


2. Disconnect your phone and reconnect it

disconnect the phone itunes error 9006 windows 10

According to users, sometimes you can fix this problem simply by disconnecting your iOS device while the update is downloading.

To do that, follow these steps:

  1. Put your iOS device in the Recovery Mode and let the iTunes download the update.
  2. While iTunes is downloading, disconnect your iPhone.
  3. Once the update is close to finishing, connect your iPhone again and the update should be installed.

Other users claim that you need to do the following:

  1. Enter DFU mode on your device and select Restore > Restore and Update.
  2. Pause the download on iTunes and remove the iOS device.
  3. Restart the iOS device and resume the download.
  4. Connect the iOS device to your computer and put it back into DFU mode.
  5. Wait for the process to finish and choose the Restore option.

3. Check your antivirus and firewall

According to users, sometimes your antivirus or firewall can cause iTunes error 9006 on Windows 10. To fix it, it’s advised that you add iTunes as an exception in Windows Firewall.

To do that, follow these steps:

  1. Press Windows Key + S and enter windows defender firewall.
    • Select Windows Defender Firewall from the list of results.
  2. From the left pane, select Advanced settings.
  3. Right-click Inbound Rules and choose New Rule.
    new rule itunes error 9006 windows 10
  4. Select Program and locate iTunes.
  5. Select As rule Applies and select all options.
  6. Save changes.

After doing that, check if the problem is still there. Alternatively, you might want to try disabling your antivirus or firewall temporarily and check if that helps.

There you go, these are just a couple of simple solutions that should help you fix iTunes error 9006 on your Windows 10 PC.

Let us know which solution is the best at fixing this issue by leaving us your feedback in the comments section below.



[wl_navigator]

FIX: iTunes error 4013 on Windows PC

Sometimes you might encounter iTunes error 4013 on Windows operating system. This issue usually appears when you’re trying to restore your iOS device using iTunes, and in today’s article, we’ll show you how to fix this problem once and for all.


1. Make sure that iTunes and your system are up to date

If you’re getting iTunes error 4013 on your Windows PC, you need to ensure that you have both the latest versions of Windows and iTunes installed.

To check for updates, you just need to do the following:

  1. Press Windows Key + I to open the Settings app.
  2. Navigate to the Update & Security section.
    check for updates itunes error 4013 windows
  3. Now click the Check for updates button.

After installing the latest updates, check if the problem is still there. Alternatively, you can update iTunes to the latest version and check if that solves the problem.

To do that, follow these steps:

  1. Open iTunes.
  2. Navigate to Help > Check for Updates.

After updating iTunes, check if the problem is still there.


2. Forcibly restart your iOS device

Sometimes the only way to fix this error is to restart your iOS device by force. This process is relatively simple, but it differs depending on the model.

iPad with Face ID

  1. Press and quickly release the Volume Up button.
  2. Press and quickly release the Volume Down button.
  3. Press and hold the Top button until the device restarts.

iPhone 8 or newer

  1. Press and quickly release the Volume Up button.
  2. Do the same with the Volume Down button.
  3. Now press and hold the Side button until the Apple logo appears.

iPhone 7, iPhone 7 Plus, and iPod touch (7th gen)

  1. Press and hold both the Side/Top button and Volume Down button.
  2. Do this until you see the Apple logo.

iPad with Home button, iPhone 6s or older, and iPod touch (6th gen)

  1. Press and hold both Side/Top button and the Home button.
  2. Keep the buttons pressed until you see the Apple logo.

3. Try using a different cable, USB port, or a computer

itunes error 4013 windows USB cable

Sometimes the issue can be caused by your USB cable or USB port. Try switching the USB port and check if that helps. You might also want to try using a different USB cable. Keep in mind that you need to use official or Apple-certified cable in order to avoid additional issues.

Lastly, you can try to perform this process on a different computer and check if that helps. If the problem is still there, try using the Update option instead of Restore and check if that solves the problem.

There you go, a couple of simple solutions that should help you fix iTunes error 4013 on your Windows PC.

What method did you use to get rid of this annoying error?

Let us know what worked for you by leaving us a message in the comments section below.



[wl_navigator]

FIX: This setting is enforced by an extension Chrome error

When trying to set a different search engine or making other changes to your Google Chrome browser, you may encounter ‘this setting is enforced by an extension / your administrator‘ error.

This error can occur due to multiple reasons, including conflicting Chrome extensions, local Chrome policy, as well as a malicious registry key.

If you are also troubled by this error, here are a couple of troubleshooting tips to help you resolve the ‘this setting is enforced by an extension/your administrator‘ error in Windows.


How do I fix this setting is enforced by an extension/your administrator Chrome error?

1. Disable Google Docs Offline extension

this setting is enforced by an extension
  1. Launch Google Chrome.
  2. Click the menu icon (three horizontal bars).
  3. Select Tools and then click on Extensions.
  4. This will list all the Chrome extensions installed for the browser.
  5. Locate Google Docs Offline extension and toggle the switch to turn off the extension.
  6. Restart Google Chrome and check if the error is resolved.
  7. If the error persists, remove the Google Docs Offline extension.
    this setting is enforced by an extension
  8. To remove the extension, open the Extensions option.
  9. Click the Remove button under Google Docs Offline.
  10. Restart Google Chrome and check for any improvements.

2. Check for malware attack

  1. Before messing with registry files, check if your system is infected with malware or adware.
  2. If you have an antivirus installed, perform a complete scan of your system to find any hidden browser hijacker.
  3. If you don’t have an antivirus installed, try Malwarebytes.
  4. Malwarebytes is known for its malware finding capabilities and can perform a deep scan to find browser hijackers as well as viruses.
  5. After performing a deep scan, remove all the trojans, malware, and potentially unwanted programs.
  6. Restart Google Chrome and check for any improvements.

Your PC can get infected by malware and browser tool hijackers if you have downloaded software and media contents from suspicious sites. By running a deep scan, you can remove suspicious programs from your computer.


3. Change the policy via Command Prompt

this setting is enforced by an extension
  1. Press the Windows key.
  2. Type cmd.
  3. Right-click on Command Prompt and select Run as Administrator.
  4. If prompted by the UAC, click Yes to proceed.
  5. In the Command Prompt, enter the following command one by one and hit enter to execute:
    RD /S /Q “%WinDir%System32GroupPolicyUsers”
    RD /S /Q “%WinDir%System32GroupPolicy”
    gpupdate /force
  6. Once the commands are successfully executed, close Command Prompt.
  7. Restart Google Chrome and check if the error this setting is enforced by an extension/your administrator is resolved.

By executing these commands you can update the policies that may have been changed by the malware or third-party extensions resulting in the error.


4. Delete the policy from Registry Editor

Google Chrome extension error
  1. Press the Windows Key + R to open Run.
  2. Type regedit and click OK to open Registry Editor.
  3. When prompted by the UAC to give administrator rights, click Yes to proceed.
  4. In the Registry Editor, navigate to the following location:
    HKEY_LOCAL_MACHINESOFTWAREPoliciesGoogleChrome
  5. You can copy-paste the above path in the Registry Editor to access it as well.
  6. In the right pane, select all the values that look suspicious.
  7. Right-click on the values and select Delete.
  8. Once all the suspicious values are deleted, close the Registry Editor.
  9. Restart Google Chrome and check if the error is resolved.

The ‘this setting is enforced by an extension/your administrator‘ Google Chrome error occurs due to an incorrect policy being added in the Registry Editor or by a hostile extension creating conflict with the browser. By following the steps in this article, you can fix the problem and make the necessary changes to your browser.

While downloading any software or media content from suspicious sites, take precautions as the attackers can hide malware and browser hijacking tools in the software.

[wl_navigator]

Whitelist vs Blacklist: What’s the difference?

Whitelisting, respectively blacklisting, have been both great protection measures. When it comes to networking and permissions, creating a virtual “guest list” for trusted devices is much safer than relying on just using passwords.

As a rule of thumb, any password can be cracked on stolen, it’s just a matter of time and ingenuity. However, fully replicating a device, in addition to guessing a password, is much more difficult.

Many online services rely on this technique. For instance, geo-blocking services use blacklisting/whitelisting to keep things in order. VPNs are another great example of whitelist/blacklist-friendly products.

Some VPNs such as Private Internet Access let you exclude some programs from going within the secure tunnel. Or you can set them to always use the VPN connection, no matter what. And that’s exactly what blacklisting and whitelisting are about.

The difference between blacklist and whitelist

What is blacklisting?

The principle of blacklisting relies on blocking certain individuals, whether they’re devices, services, IP addresses, or entire regions, from gaining access to your resources.

If you operate a service that’s widely available, generally speaking, blacklisting is more common. That’s mainly because it can help you keep at bay only specific individuals instead.

This can also be useful if you operate a game server and you encounter cheaters, for instance. You put their IP address/username/MAC address on a blacklist, and they no longer have access to your game server.

In short, blacklisting is when you deny access to specific individuals to your resources.

What is whitelisting?

Whitelisting is, as you’d expect, an exact opposite of the blacklisting technique. You define a list of trusted entities that can access your resources, and the service remains unavailable to everyone that’s not on the list.

Running an operation that needs to be accessible only to certain entities is an excellent opportunity to use whitelisting. For instance, if you own a business and need to keep the internal network private, only to be available for employees.

You create a whitelist from your employees’ IDs, IP addresses, MAC addresses, or anything you want to identify them after, and they’ll be the only ones able to access your network.

Quite simple, right?

Whitelisting vs blacklisting

When it comes to keeping your resources secure, you need to make the best choice. Whether it’s blacklisting or whitelisting you’ll choose, the principle stays the same: both techniques restrict your resources from general access.

However, in some situations, one is better than the other. Additionally, choosing the wrong method usually leads to wasting precious time and losing efficiency.

For that reason, we’ll tell you when it’s best to use whitelisting, and in which cases its counterpart (i.e. blacklisting) is more fit.

  • Whitelisting: blocking spam, administrating a private network, managing trusted device within your own network or at home, running a beta testing campaign
  • Blacklisting: blocking offenders, removing trust from a previously trusted device, terminating accounts, avoiding contact with certain entities

Both whitelisting and blacklisting can be handy if used right

The bottom line is that either technique can come in handy, as long as you use the right one according to your needs. As a rule of thumb, the wider the access you want for your service, the brighter the color of your list should be.

Some services, such as firewalls and VPNs, offer this option inherently. The purpose of these services is to restrict or allow access to certain resources for some entities. Therefore, it makes sense that they make use of these blocking techniques.

[wl_navigator]

How to enable Quiet notification requests in Microsoft Edge

Nowadays, if you’re not careful, you get yourself a slew of unwanted notifications from a lot of sites. Microsoft Edge not only has the possibility to block them but also hide them.

Follow our step-by-step guide to learn how to do that.

How can I get rid of website notifications in Microsoft Edge browser?

  1. Launch the Microsoft Edge browser, click on the three horizontal dots from the top right corner, and select Settings from the drop-down menu.How to enter Microsoft Edge settings
  2. Next, click on the Site permissions option from the left pane, and then on the Notifications option from the right.
    Microsoft Edge site notifications
  3. Now you have two options: to block notifications altogether just turn off the Ask before sending option. To quiet down the notifications, turn on the Quiet notification requests option.
    how to block notifications in Microsoft Edge

Of course, if you change your mind about this and you really need those notifications, you can always go back to change them to your liking.

How can I block notifications from websites selectively?

If you don’t want to silence the notifications or block all the notifications, there’s a third option, to block only the notifications from certain sites.

Do do that, click on the Add button from the Block option like in the picture below, then paste the link in the new tab.

how to block the site notifications

This way, only the notifications from the selected websites will be blocked. If you change your mind, just click on the three dots from the website you blocked and select Allow or Delete.

We hope this guide is useful to you. If you have any suggestions or questions, drop us a comment below.

[wl_navigator]

FIX: Not enough quota available to process this command

When working with files, you may encounter an error message stating Not enough quota is available to process this command.

This happens when you try to copy files from your computer to network folders. Sometimes it will be accompanied by the error code 0x80070718 in Windows 10.

Use this article to perform the below troubleshooting steps. Follow the steps in the presented order.


How do I fix the Not enough quota available to process this command error? 

1. Close applications

Windows 10 error 'Not Enough Quota' close applications
If you have a number of applications running on your computer, at the same time, they will consume most of your system resources, including the quota.

As a result, you can close all the unnecessary applications and then check if the error is fixed.


2. Change the Default Save Location

Windows 10 error 'Not Enough Quota' change default save location

  1. Press Windows key + R to open up a Run dialog box. Inside the text box, type ms-settings:savelocations and press Enter to open the Default Save Locations window of the Settings app.
  2. Change, the default drive that is used for saving, from your SSD to the traditional HDD. Use the drop-down menu associated with every type of folder found inside the Default Save Location window.
  3. Click the Apply button for each folder that has the default location changed.
  4. Restart your computer and see if the issue is resolved.

The steps above can be followed if the file showing the error is hosted on an SSD drive.


3. Change Disk Usage settings

  1. Type control panel in the Search box and then click Control Panel.
  2. Set the View by Small icons and then click Sync Center.
  3. Click Manage offline files to open the Offline Files window.
  4. Go to the Disk Usage tab and then choose Change limits.
  5. Drag the sliders to increase the Maximum amount of space all offline files can use and the Maximum amount of space temporarily files can use. Then, click OK to save the changes.change disk usage settings
  6. Click Apply and OK on the Offline Files window and then close it.
  7. Reboot your computer to see if the error persists.

You can’t open Control Panel? Take a look at this step-by-step guide to find a solution.


4. Change paging file size in the Virtual Memory settings

You also get this error when the paging file size in the Virtual Memory settings is small. To change the settings in Windows 10, follow these steps:

  1. Open Control Panel, set View by Small icons and then click System.
  2. Click Advanced system settings and then go to the Advanced tab.
  3. Click Settings… under the Performance section.click Settings
  4. In the Performance Options window, go to the Advanced tab, and click Change….
  5. Uncheck the box next to Automatically manage paging file size for all drives.
  6. Choose Custom size, enter the Initial size (you can enter the Recommended side showed at the bottom), and the Maximum size (a larger amount than the initial size). Click Set and OK to save the changes.choose Custom size
  7. Reboot your computer and check if the error is fixed.

The error code 0x80070718 is pretty common in Windows 10. Many users managed to fix this issue by following the above-mentioned solutions.

If you have any other questions or suggestions, don’t hesitate to reach for the comments section below.

[wl_navigator]

Intel Bluetooth driver update fixes mouse connective issues

You may now download the latest Intel Bluetooth driver update that addresses a range of connectivity issues.

Bluetooth devices, from PC accessories like keyboards to headsets and speakers, are part and parcel of your everyday life. They make it much easier to connect to devices like smartphones and PCs without any of the usually messy cables.

But a driver issue can cause these wirelessly-connected devices to malfunction when you are performing certain tasks on your Windows 10 PC.

If you have been experiencing such a bug with your Bluetooth gadget, try installing the Intel drivers to fix it.

Intel Bluetooth driver update solves HID mouse lag problems

It is difficult to accomplish anything with a Bluetooth input device that has a lag glitch. Seemingly, some Windows 10 users had this problem with their HID mouse while playing music on their PC.

Also, some users reported the lagging or disconnection of their HID mouse or keyboard with Wi-Fi connectivity on in certain cases.

Fortunately, the latest Intel Bluetooth driver update fixes that problem. The software package (version 21.90.2) addresses these other concerns:

  • On some systems Bluetooth device may stop working while continuously used for a very long period of time.
  • On some systems with certain Bluetooth headsets, the audio may come out discontinuously while streaming video online over Wi-Fi.

The update offers more than just bug fixes, so you may want to download and install it even if you have not experienced any of the above problems.

Included in the package are functional enhancements, which will definitely impact your Bluetooth experience. Likewise, the update delivers security fixes.

How to get and install the update

  1. Go to the Intel Bluetooth driver update page
  2. Read the instructions for selecting the right package for your OS and Intel wireless adapter.
  3. Download the update.
  4. Uninstall the current Intel Bluetooth driver.
  5. Double click the setup file to start installing.

As always, feel free to share your experience with Bluetooth devices (or ask any questions) in the comments section below.

[wl_navigator]

FIX: Your Session Has Expired, Refresh The Page Reddit Error

Reddit is one of the foremost media aggregation websites. However, it has a few bugs, such as the Your session has expired error.

Numerous users have said they can’t log in to Reddit when the site displays a Your session has expired error message. However, some users have fixed that error with these resolutions.

How do I fix the error Your session has expired?

1. Log in to the old Reddit

This isn’t exactly a fix, but some users have said they can still log in to the old Reddit without any issues. To do that, open the old Reddit in a web browser. Enter your login details there. Then click the Login button.

old Reddit your session has expired. please refresh the page and try again reddit

2. Clear your browser’s cache and cookies

Google Chrome

  1. Some users might need to clear their browsers’ cache and cookie data to fix the Your session has expired error. To do that in Google Chrome, click that browser’s Customize Google Chrome button.
  2. Click More tools and Clear browsing data to open the window shown directly below.
    Clear browsing data options your session has expired. please refresh the page and try again reddit
  3. Select the All-time option.
  4. Select the Cached images and files check box.
  5. Then click the Cookies and other site data option to select it.
  6. Click the Clear data button.

Firefox

  1. To clear Mozilla Firefox’s cache and cookies, click the Open menu button in that browser.
  2. Click Library to open the sidebar menu shown directly below.
    Library menu your session has expired. please refresh the page and try again reddit
  3. Click the History option.
  4. Select the Clear Recent History option.
    Clear All History your session has expired. please refresh the page and try again reddit
  5. Select the Everything option on the Time range drop-down menu.
  6. Select the Cache and Cookies checkboxes.
  7. Press the Clear Now button.

It’s important to remember that removing cookies does not remove all data tracking. Unless you erase your cache and browser history, many websites may reassemble your cookies.  

Fortunately, there is a solution to avoid any problematic scenarios in which you lose data entries while maintaining your privacy in Reddit, or any other browser and avoiding crashes and freezing.

For its fantastic function known as Intelligent Scan, CCleaner is a professional smart cookie and cache cleaning tool.

Intelligent Scan in CCleaner makes it simple to add websites that you often visit to a list, which can be found under Options > Cookies > Cookies to Keep.

You may utilize this function whenever you want, and it’s so simple to set up that you’ll forget about the tedious cookie and cache deletion routine.

3. Login with an alternative browser

You might find you can log in to Reddit fine with an alternative web browser. So, try logging in with another browser.

Edge comes with Windows 10, so that’s an alternative to Chrome and Firefox you don’t need to download. Then, a great browser alternative would be Opera.

This modern-looking browser has useful utilities, such as integrated messaging apps or social media embedded right in the sidebar. You have as well the option to customize the homepage and add your most-used services.

Hence, to fix this annoying Reddit issue you should rely on this multifunctional browser that puts the user first, offering both great functionality and strong security.

⇒ Get Opera

4. Log in via Reddit’s sidebar menu

  1. Some users have also confirmed that the same Your session has expired error doesn’t arise when they log in via Reddit’s sidebar menu. Click the button at the top right of Reddit’s page to open the sidebar menu shown directly below.
    Sidebar menu your session has expired. please refresh the page and try again reddit
  2. Click the Log In/Sign Up option.
  3. Then enter your login details there.
  4. Click the Log In button.

5. Log in to Reddit from another user’s profile page

A few Reddit users have confirmed that they fixed the Your session has expired error by logging in from another user’s profile page. To do that, click a user profile link in a Reddit post. That will open a user’s profile page. Then click the login button from the user profile page.

Those are a few of the confirmed resolutions that can fix the Your session has expired error so that you can log back into Reddit.

There might be other ways to fix the same issue, and users are welcome to share alternative resolutions for the Your session has expired error below.

How to fix Windows Update error 8020002e

Windows Update errors aren’t entirely uncommon as there are lots of threads on the Microsoft forum pertaining to update issues. Error 8020002e is another Windows Update issue that users have discussed on Microsoft’s support forum.

One user stated in an MS forum post:

The following error prevents my computer from installing Windows Updates: Code 8020002E.

If you need to fix that error, check out some of these potential resolutions for it.


How might I fix Windows Update error 8020002e?

1. Clear SoftwareDistribution subfolders

First, try this user confirmed fix for Windows Update error 8020002e.

  1. Press the Windows key + X hotkey, and select Run on the menu.
  2. Input services.msc in the Open text box, and press the Enter key.
  3. Double-click Windows Update to open the properties window shown directly below.Windows Update Properties Windows Update Error 8020002e
  4. Click Disabled on the Startup type drop-down menu.
  5. Click Stop.
  6. Select the Apply option, and click OK to exit.
  7. Press the Windows key + E keyboard shortcut.
  8. Open this folder in File Explorer: Windows > Software Distribution > DataStore.DataStore subfolder Windows Update Error 8020002e
  9. Press Ctrl+ A to select everything in DataStore.
  10. Press the Delete button on the Home tab.
  11. Then open this folder path:
    • Windows > Software Distribution > Download.Download subfolder Windows Update Error 8020002e
  12. Delete everything in that Download folder as you did for DataStore.
  13. Open the Windows Update Properties window from Services again.
  14. Then select the Automatic startup option, and click the Start button.
  15. Click the Apply and OK buttons.

2. Turn off third-party antivirus utilities

The 8020002e error might be due to a third-party antivirus utility interfering with Windows Update. Avast, Comodo, Sophos, and McAfee antivirus software reputedly generate the issue.

So, disabling, or uninstalling, those antivirus utilities before checking for updates might fix the error. Right-click your antivirus utility’s system tray icon and look for a disable option of some description on the context menu.

Then select that option to disable the software.

Disable Auto-Protect option Windows Update Error 8020002e


3. Turn off Windows Defender Firewall

If you don’t have a third-party antivirus utility, try temporarily turning off Windows Defender Firewall.

  1. To do that, enter control /name Microsoft.WindowsFirewall in Run and click OK.
  2. Click Turn Windows Defender Firewall on or off on the left of the applet.
    Windows Defender Firewall applet Windows Update Error 8020002e
  3. Select both the Turn off Windows Defender Firewall options there.Turn off Windows Defender Firewall options Windows Update Error 8020002e
  4. Click OK to exit.
  5. If that fixes the issue, you will still need to turn Windows Defender Firewall back on at some stage.
    • Try restoring WDF to its defaults by clicking Restore defaults on the left of its Control Panel applet before reactivating the firewall.

Looking for a reliable antivirus tool? Check out this article for our top choices.


4. Disable proxy server

If utilizing a proxy server, try disabling proxy.

  1. Press the Type here to search button on the taskbar in Windows 10.
  2. Enter network status as the search keyword.
  3. Click Network status to open the window in the shot directly below.
    Network status in Settings Windows Update Error 8020002e
  4. Click Proxy on the left of Settings.
  5. Toggle the Use a proxy server option off.
    Use a proxy server option Windows Update Error 8020002e

5. Run a System File Checker scan

System file corruption can be another factor behind 8020002e error.

  1. To run a System File Checker scan, enter cmd in Windows 10’s search utility.
  2. Open an elevated Prompt by right-clicking Command Prompt and selecting Run as administrator.
  3. First, run a Deployment Image Servicing Management scan by entering DISM /Online /Cleanup-Image /RestoreHealth and pressing Return.
  4. Then input the sfc /scannow command, and press the Enter key.sfc /scannow command Windows Update Error 8020002e
  5. If the Command Prompt reports those scans repaired something, restart Windows.

There’s a pretty a good chance those resolutions will fix error 8020002e. They aren’t guaranteed, however, and some users might need to refresh Windows with a repair install to fix the issue.

Alternatively, users can reset Windows 10 to factory settings with its Reset this PC utility.

Do you know of another way of fixing this Windows Update error? Share it with us and the other users by leaving us a message in the comments section below.



[wl_navigator]

FIX: Windows 10/11 error 0x81000019

The 0x81000019 error can arise when users try to back up Windows 10. The error message states:

A shadow copy could not be created. Please check VSS and SSP application event logs for more information.

Consequently, users can’t back up Windows 10 as required. Do you need to fix that error? If so, go through these potential resolutions for error 0x81000019.


How can I fix error 0x81000019 on Windows 10?

1. Check the VSS and Software Protection services

First, check that both the required Volume Shadow Copy and Software Protection services are running.

  1. Right-click the Start button and select to open the Run accessory.
  2. Enter services.msc in the Run accessory’s text box, and click the OK option.
  3. Double-click Volume Shadow Copy to open the window in the snapshot directly below.The Volume Shadow Copy window Error Code 0x81000019 on Windows 10
  4. Select the Automatic startup type for VSS if the service is disabled.
  5. Click the Start button in the properties window.
  6. Click the Apply option, and press the OK button.
  7. Double-click Software Protection to open its window.Software Protection Properties window Error Code 0x81000019 on Windows 10
  8. Press the Start button there if the service is stopped.
  9. Click OK to exit.

2. Free up storage space

The 0x81000019 error can often arise when there’s insufficient storage space available on the destination or source drive. So, make sure you have sufficient space on the drive you’re trying to back up Windows 10 to.

Furthermore, you’ll also need to have a good amount of space available on the source drive (about 40 percent free space). So, you might need to free up space if your hard drive is very full.

There are various methods to free up storage. Software will usually take up the most space, so uninstalling superfluous apps is one of the best methods.

In addition, you can also free up quite a lot of space by deleting junk files with system maintenance utilities.

System Mechanic window Error Code 0x81000019 on Windows 10


3. Expand the system reserved partition

Some users might need to expand their reserved system partition space to more than 500 megabytes to fix the x81000019 error. You can do that with the freeware MiniTool Partition Wizard software.

Click Free Download on its download page to get the installer for that software. That linked page also includes guidelines for how you can expand the system reserved partition with MiniTool Partition Wizard Free 11.

The MiniTool Partition Wizard window Error Code 0x81000019 on Windows 10


4. Erase System Restore points

Error 0x81000019 could be due to outdated system restore points if the error message says The specified object could not be found.

  1. To fix that, open Run.
  2. Enter Control Panel in the Open box, and click OK.
  3. Click System and Security on the menu shown directly below.
    Control Panel menu Error Code 0x81000019 on Windows 10
  4. Click System.
  5. Click System protection on the left to open the window shown directly below.
    System Properties window Error Code 0x81000019 on Windows 10
  6. Then press the Configure button.
  7. Press the Delete button shown directly below.System Protection window Error Code 0x81000019 on Windows 10

5. Disable or uninstall third-party antivirus software

Third-party antivirus software, such as Avast, McAfee, and Comodo, might be interfering with the Windows Backup.

Try disabling your third-party antivirus utility by right-clicking its system tray icon and selecting a disable option on its context menu, like the one in the snapshot directly below.

Select to disable it until you restart Windows to give yourself time to carry out the backup. Some users might need to completely uninstall their third-party antivirus software to fix error 0x81000019.

Norton Disable Auto-Protect option Error Code 0x81000019 on Windows 10
The above resolutions might fix error 0x81000019, but they’re not entirely guaranteed for all users. If the resolutions above aren’t enough, try running a system file scan with the sfc /scannow command.

As a final resort, a repair install of Windows will probably do the trick.

Which of the solutions mentioned above worked best for you? Let us know by leaving us a message in the comments section below.

Getting the 0x3A98 error in Windows 10? Fix it in 4 steps

When you attempt to generate a full WlanReport with Command Prompt, you may get the 0x3A98 error in Windows 10. It could also be a result of a network issue or interference from a security program.

In this guide, you will learn how to resolve the error 0x3A98 error quickly and permanently.


How to clear the error 0x3A98

1. Run WlanReport as an Administrator

  1. Press the Windows key and then press R while still holding the Windows key to trigger the Run dialog box.
  2. Enter cmd in the Run dialog box and press CTRL + SHIFT + Enter. This launches Command Prompt with Administrator privileges.
  3. In the elevated Command Prompt, the next step is to generate the Wlan Report.
    generate wlanreport as an administrator to repair the error 0x3a98
    Do that by entering the command below:
 netsh wlan show wlanreport
  1. After entering the command, hit Enter to run it.

If you only get the error 0x3A98 error when you run complete WlanReports, the error may be due to insufficient privileges. Running WlanReport in elevated mode will remove the 0x3a98 error in Windows.


2. Troubleshoot the network

  1. Open the Run dialog box by pressing the Windows key and R.
  2. In the box, type ms-settings:troubleshoot and hit Enter to launch the troubleshooter.
  3. In the Troubleshooting utility, scroll down to the Find and Fix other problems section and click on Network Adapter.
  4. Next, from the extended menu, click on Run the troubleshooter.run network troubleshooter to repair the error 0x3a98
  5. The troubleshooter shows you the network adapters present in your machine. Select the problematic one and hit Next.
    If you get the error 0x3A98 on both wireless and wired networks, select All Network adapters and click Next.
  6. At this point, the wizard begins to scan your system for recommended fixes. When it finds one, click the Apply this fix link to implement it.
  7. When all is complete, reboot the computer as instructed and check if the error 0x3A98 still shows up.

3. Disable all third-party interference

Interference here refers to a security program with real-time protection that controls your network data. When this control is too much, it can lead to the 0x3a98 error in Windows 10.

To treat this case is straightforward. All you have to do is disable these applications or uninstall them entirely. From reported cases, the most common culprits are Comodo and McAfee.

You can disable antiviruses, antimalware, and similar security programs from the taskbar or their interfaces. To uninstall them totally, follow the steps below:

  1. Press the Windows key and then the R key on your keyboard for the Run dialog box.
  2. In the Run box, enter appwiz.cpl.
  3. You will be taken to a page with all installed programs listed. Find the specific application and right-click on it.
  4. Hit the Uninstall/Change after selecting the program.
  5. Follow through with the wizard, and when finished, restart your computer.

4. Refresh your modem

error 0x3a98 fixed by refreshing modem

If you have attempted the previous three solutions and still found no joy with resolving the 0x3A98 error in Windows 10, the issue may be from your router or modem.

Users who experienced this error 0x3A98 successfully fixed it by refreshing their network connection. Simply switch the Off the modem completely, wait for a couple of seconds, and then switch it back On.


You may need a sharp, pointed object to access the reset button of some modems. Either way, when you refresh the modem or router, the error 0x3a98 situation will be gone.

In this guide, we went through the various fixes to remove the 0x3a98 error in Windows 10. A quick Google search for the error 0x3a98 brings up tons of software, but do not be misled because most of these applications come with malware.
[wl_navigator]

Seeing the 0x00000bcb printer share error? Follow this guide

Error 0x00000bcb is a printer issue that some users have posted about on Microsoft’s forum. That error arises for some users when they try to connect printers to local area networks.

When those users try to add a shared network printer, a Connect to Printer error message pops up with the 0x00000bcb code. Does that error message ring a bell? If so, check out these potential resolutions for error 0x00000bcb.


How can I fix error 0x00000bcb?

1. Open the Printer troubleshooter

  1. First, try fixing error 0x00000bcb with Windows’ built-in Printer troubleshooter. To open the search utility, press the Windows key + S keyboard shortcut.
  2. Input troubleshoot in the Type here to the search box that opens.
  3. Select Troubleshoot settings to open Settings.
    Troubleshoot tab error 0x00000bcb printer
  4. Select Printer and click Run the troubleshooter to open the window shown directly below.Printer troubleshooter error 0x00000bcb printer
  5. Select a printer you need to fix the error for, and click the Next.
  6. Click Apply this fix if the troubleshooter presents a potential resolution for error 0x00000bcb.

2. Deselect the SNMP Status Enabled option

  1. Some users have confirmed they’ve fixed error 0x00000bcb by deselecting the SNMP Status Enabled check box. To do so, launch Run with the Windows key + R hotkey.
  2. Enter printmanagement.msc in Run and click OK to open Print Management in Windows 10 Pro. Windows 10 Home edition does not include the Print Management console.
    Print Management window error 0x00000bcb printer
  3. Right-click the printer error 0x00000bcb arises for and select Properties.
  4. Click Configure Ports on the Ports tab.
  5. Deselect the SNMP Status Enabled check box if its selected.
  6. Click OK to close the window.

3. Restart your Print Spooler

  1. Users have said that restarting the Print Spooler can resolve 0x00000bcb. Open Windows’ Run accessory.
  2. Then input services.msc in the Open text box. Click OK to open the Services window.
  3. Double-click the Print Spooler service to open its properties window.
    The Print Spooler Properties error 0x00000bcb printer
  4. Select the Automatic startup option on the drop-down menu.
  5. Click the Stop option.
  6. Wait a minute or two, and then click Start to restart Print Spooler.
  7. Click the Apply option.
  8. To close the window, press the OK button.

4. Repair your Print Spooler

  1. Some users might need to repair the Print Spooler via the Command Prompt to fix error 0x00000bcb. Enter cmd in Run.
  2. Then press the Ctrl + Shift + Enter hotkey, which opens an elevated Command Prompt window.
  3. Enter cdWindowsSystem32spool in the Command Prompt, and press the Return key.change directory command error 0x00000bcb printer
  4. Enter this command in the Prompt’s window: cacls.exe PRINTERS /E /G administrator:C. Press the Return key after entering that command.
    cacls.exe command error 0x00000bcb printer
  5. Thereafter, close the Command Prompt.
  6. Click Restart on the Start menu.

5. Reinstall printer ports

  1. Reinstalling printer ports, and their driversis a confirmed fix for error 0x00000bcb that can resolve driver conflicts. Input devmgmt.msc in Run, and click the OK button.
  2. Double-click Print queues to expand that category.
    Print queues category error 0x00000bcb printer
  3. Right-click all the installed printer drivers listed there and click Uninstall device on their context menus.
  4. After uninstalling the listed printer drivers, expand the Universal Serial Bus controllers category.
    Universal Serial Bus controllers category error 0x00000bcb printer
  5. Right-click each printer port listed there and select the Uninstall device.
  6. Thereafter, restart your desktop or laptop. Windows should install generic printer drivers during the system startup.

Those resolutions can fix error 0x00000bcb on Windows 10, 8.1, and 7. So, give some of those potential fixes for error 0x00000bcb a try.

[wl_navigator]

How to fix the Windows Application error 0xc0000906

The application was unable to start correctly (0xc0000906) error can block you from opening your software, particularly games like Arkham Origins or Forza. If you’re facing this issue, follow the steps below to fix it fast:

How do I fix Windows Application error 0xc0000906?

1. Turn off third-party antivirus software

Note icon NOTE
Only do this if you’re 100% sure you downloaded the app you’re trying to run from a reputable source. If you’re running cracked games or got it from a dangerous website, disabling antivirus is a no-no.

Some antivirus tools are overzealous and block legit apps. This might be the case now, so consider disabling yours and try running the app again.

If that’s the case, consider whitelisting the app and opening up the antivirus again. Better yet, if you keep having trouble, switch to a better antivirus.

2. Turn off Windows Defender

  1. To do that, press the Settings button on the Start menu.
  2. Select Update & Security, and then click Windows Security tab on the left of Settings.Windows Security tab Windows Application Error 0xc0000906
  3. Select Virus and threat protection settings and click Virus and threat protection settings to open further options.
  4. Turn off the Real-time protection option.
  5. Try launching the software.

Alternatively, you can add your app to the Windows Defender Exclusions list.

3. Run the software in compatibility mode

  1. Error 0xc0000906 might also arise for older, incompatible Windows 10 software.
  2. To fix that, right-click the icon for the software the issue arises for and select Properties.
  3. Select the Run this program in compatibility mode option on the Compatibility tab.
    Compatibility tab Windows Application Error 0xc0000906
  4. Select the earlier Windows platform the publisher released the software for.
  5. Select the Run this program as administrator option.
  6. Click the Apply button.
  7. Click OK to close the window.

Outdated games or apps may have trouble running on newer iterations of Windows. Running Steam games or other apps in compatibility mode should fix this issue.

4. Run a SFC and DISM scan

  1. Error 0xc0000906 could be due to system file corruption, which the System File Checker might resolve.
  2. Launch Run by pressing the Windows key + R hotkey.
  3. Input cmd in Run, and press Enter.
  4. In the Command Prompt, enter sfc /scannow and press Enter.
  5. Wait for the process to complete, then enter DISM.exe /Online /Cleanup-image /Restorehealth and press enter.
  6. Then input sfc /scannow and press Enter to start a system file scan.sfc /scannow command Windows Application Error 0xc0000906
  7. Restart Windows after the scan.

5. Roll back Windows 10 to a restore point

System Restore window

Check out our System Restore post for further details on how to roll Windows 10 back to an earlier date.

6. Reinstall the software

  1. If error 0xc0000906 largely pertains to one of your programs, try reinstalling that software. To do so, input appwiz in Run’s Open box; and press the Enter key.
    The uninstaller applet Windows Application Error 0xc0000906
  2. Then select the software to remove, and press the Uninstall button.
  3. Restart Windows after uninstalling the software.
  4. Reinstall the software with the latest version.

7. Reinstall Microsoft Visual C++ Redistributable

  1. Press Windows key + R to open the Run dialog.
  2. Type appwiz.cpl and press Enter to open the Programs and Features window.
  3. Locate the Microsoft Visual C++ Redistributable in the list.
  4. Select it, then click Uninstall.Uninstall Microsoft Visual C++ Redistributable Package
  5. Complete the uninstallation and go to the Microsoft Visual C++ Redistributable download page.
  6. Choose a compatible version and download the package.
  7. Run the installer and try opening the troublesome app again.

The above resolutions will fix error 0xc0000906 for the majority of users. If those resolutions don’t fix error 0xc0000906, you might need to carry out a repair install of Windows or reset the platform.

Excel File Format and Extension Don’t Match: How to Fix It

If you rename a file extension from one Excel format to another (e.g., from a .xlsx to .xls), you get the following error message:

The file format and extension of .xls don’t match. The file could be corrupted or unsafe. Unless you trust its source, don’t open it. Do you want to open it anyway?

Microsoft Excel opens files in various formats, such as .xls, .xlsx, .xlsm, .xlsb, .xltx, .xml, and many more. This error also gets worse. If you click Yes, the file opens anyway, but with all of its content missing.

Of course, like all error messages, the format and extension don’t match error can be as a result of other underlying issues, the most common of which is that the document is deemed to be corrupt.

Here is what to do when faced with this challenge.

How do I fix format and extension don’t match in Excel?

1. Unblock access for safe files

  1. Go to the folder which contains the Excel file.
  2. Right-click on the document you are trying to open.
  3. From the options, select Properties.
  4. Next, on the General tab hit Unblock.
  5. Finally, click on the OK.

2. Add the workbook to a Trusted Location

  1. Launch Ms Excel.
  2. Click File on the toolbar and then choose Options.
  3. Next, in the resulting screen, click Trust Center.fix file format and extension don't match: click trust center
  4. Finally, click on Trust Center Settings and select Trusted Locations on the left sidebar.add a trusted location to repair the file format and extension don't match error

In Microsoft Excel 2010, 2013, and 2016, saving a file to a Trusted Location lets the program view it as safe. Excel comes with default trust locations, and you can add others by clicking the Add new location button.

Save the problematic worksheet in a trust location and try to open it again. However, you must note that if a malicious person places a file in a trusted location, Excel will overlook this document also.

3. Repair the workbook to fix file format and extension don’t match error

  1. Launch Microsoft Excel.
  2. Click the File menu on the toolbar and hit Open.
    • This will open the dialog box to browse for the file.
  3. From the dialog box, click Browse and find the workbook that gives the file format and extension don’t match.
  4. Next, instead of opening this file straight away, click on the little arrow beside the Open button and choose the Open and Repair option from the dropdown.open and repair worksheet to fix file format and extension don't match error
  5. Finally, click Repair. This should now recover the content of the problematic workbook.
  6. If the Repair operation fails to restore all the formulas and values from the workbook, try again by using the Extract Data

These solutions above should clear the file format and extension don’t match error. However, if all fail, backing up the workbook or creating a recovery file can salvage your data.

In the next section, we will explore how to recover data from the problematic file, as well as how to back up the workbook.

4. Change the calculation setting to manual from automatic

  1. Launch Microsoft Excel.
  2. Click on the File menu on the toolbar and hit New.
  3. Next, click on Blank workbook. This will open a new workbook with no values.
  4. Now, click on file again, but this time, select Options.
  5. Navigate to Formulas, and under Calculation options, select Manual.manual formula calculation fixes file format and extension don't match error
  6. Hit OK.

Now open the workbook and confirm that the file no longer gives the file format and extension don’t march error or opens blank sheets.

In conclusion, the file format and extension don’t march error comes, especially when you rename an Excel file to another extension.

We have looked into troubleshooting this issue by unblocking files, saving and opening the workbook from a trusted location, and repairing the file.

Also, we went over preventive measures to take on your worksheet, so that you do not lose data. Are you experiencing this issue or got it in the past? How did you resolve it?

We appreciate your comments and will get to as many as possible.

Microsoft Outlook email signatures will sync in the cloud

In June, Microsoft will finally bring out the e-mail signature synchronization to the cloud for Outlook. This feature was expected for a long time ago by Outlook users.

How can I sync my e-mail signature in Outlook?

The whole point of the Outlook e-mail signature syncing in the cloud is to ensure a consistent user experience when you access Outlook for Windows on any of your computers.

That means that when you will create an e-mail signature on one computer, it will sync to all the other devices if you’re using the same account.

What is an e-mail signature?

The e-mail signature is the personal or professional contact data you set for the end of the e-mail. That can mainly contain text, but you can also add graphical information.

At this moment, the signatures are stored on the device you create them. So if you create the signature on a PC, and try to send an e-mail from Outlook installed on another device, you will not be able to use that signature.

According to the Microsoft 365 roadmap, the feature is timed for a rollout beginning in June 2020, and right now it will be working only on Outlook for Windows.

However, as it’s super-useful, it wouldn’t be a total surprise if it will also extend to other platforms in the future.

Outlook’s text prediction feature

Until the e-mail signature comes along, we will have a text prediction feature in Outlook that will enable you to compose your mails via the web-based platform much faster.

It’s similar to Gmail’s Smart Compose and it’s coming to Outlook on the web later this Month.

[wl_navigator]

OSError [Errno 48] Address Already in Use: 3 Ways to Fix

You get the oserror: [errno 48] address already in use, also known as Python socket error 48, when a process attempts to bind itself to a busy port.

This error is somewhat different than Python runtime error that we covered earlier, so let’s see how we can fix it.

What is socket error 48 address already in use?

  • This error message occurs while using Python.
  • It’s caused because a different process is already using the specified socket.

How do I fix oserror: [errno 48] address already in use?

1. Specify an unused port number for the process

  1. Start the command line.
  2. Add the port number after the above command, so that it becomes: $ python -m SimpleHTTPServer (Port Number)

  3. Make sure to change the port number with the actual port number.

After running the above command, confirm if oserror: [errno 48] address already in use error is gone.

2. Free up the port

  1. Locate and list the processes using the port by running the command below: $ ps -fA | grep python

  2. If successful, you will see the process codes in the argument, looking like the line below: 502 89332 12877 0 3:40PM ttys00 0:00.15 python -m SimpleHTTPServer
  1. From the argument above, if multiple python processes are active, it is easy to spot the process running SimpleHTTPServer.
  2. From the argument above, we can now kill the process with code 89332 to free up the port. Enter the following command to kill this process: kill 89332
     
  3. If the process is not responding, you can also kill the process using the tougher command below: sudo kill -9 PID
  1. The above command sends a standard SIGTERM signal.
  2. Finally, bind the process to the port you just freed up by running the following command: $ python -m SimpleHTTPServer (Port Number)

Remember that you should change the (Port Number) in the command to the actual port number.

After entering the last command above, the process will be created on the free port. This method has proven to repair oserror: [errno 48] address already in use error.

3. Restart Raspberry Pi

  1. Turn off your Raspberry Pi.
  2. Wait for a few moments.
  3. Power it up again.

As mentioned at the beginning of this troubleshooting guide, the process may already be bound to port 800 (the default port) if you ran it before.

You can easily clear the oserror: [errno 48] address already in use by specifying an unused port or freeing up the port that the process is bound to.

By following any of the above-written methods, you should be able to fix the Python socket error 48. Python is prone to errors, and we already covered PermissionError: [Errno 13] permission denied in one of our older guides.

We also have a new guide on Cannot open shared object no such file or directory error, so you might be interested in checking it out.

However, we would appreciate it if you let us know which method worked best for you by leaving us a message in the comments section below.

Minecraft Dungeons review: A charming dungeon crawler that feels a bit unfinished

Minecraft is the most popular game of all time, with developer Mojang recently announcing 200 million copies sold. The sandbox game is Microsoft’s most valuable gaming IP, so expectations are quite high for Minecraft Dungeons, a new dungeon crawler that will be released on Xbox One, PlayStation 4, Nintendo Switch, and Windows 10 tomorrow, May 26.

During my hands-on with the closed Windows 10 beta, I wondered if Dungeons could well be “Minecraft for the rest of us.” Even though the original game has 126 million monthly active players, it has a steep learning curve and the pixelated graphic style is definitely not for everyone. Well, the blocky art style is definitely easier on the eyes in Dungeons, which makes excellent use of Epic’s Unreal Engine 4, and the game is much more accessible than regular Minecraft.

If Minecraft never clicked with you before, Minecraft Dungeons may well be the game that could change that. It probably helps that Dungeons can be played with up to four players in co-op, though crossplay is unfortunately not supported at launch.

The review code Xbox sent me included both the PC and Xbox One versions of the game, and I played Minecraft Dungeons mostly on PC because that version was able to import my character from the closed PC beta. However, the game runs flawlessly on both my Xbox One X and my PC, and the latter version supports both mouse and keyboard and Xbox controller input.

An accessible gameplay

Unlike other dungeon crawlers like Diablo 3, Minecraft Dungeons has no class system. This means that you won’t have to choose between melee-focused characters and others better at ranged attacks. All the character customization is done through loot, the enchantment points you can use to give your weapons special perks, and artifacts that give you special abilities with a cooldown time.

During my playthrough, I found that all melee weapons are not equal: you’ll start the game with a sword, but you’ll find plenty of other options including the familiar pickaxe, sickles, hammers, but my personal favorite is the two-handed glaive which has a very long range, making it easier to hit multiple enemies with one swing and keeping them at a distance.

In addition to your melee weapon, you can also shoot arrows at enemies with a bow, though arrows are pretty limited. Your armor and weapons can be customized with enchantment points, which you gain every time your character gains a new level. As an example, my level 47 character has 47 enchantment points to spend on perks that are unique to your equipment.

When you salvage your equipment, you’ll get back the enchantment points you spent on them to use on new gear. This flexible system encourages players to change their equipment all the time, and enchantments are guaranteed to make your gear pretty unique.

The artifact system will also allow you to equip three objects that will give you special abilities: My favorite ones were the Totem of Shielding which creates a protective shield that can block all projectiles for a couple of seconds. The Totem of Regeneration is also a quick way to heal yourself on the battlefield by creating a circular aura that will heal you and your allies.

Some other artifacts also let you collect souls every time you kill enemies, and you can use this resource to use magic spells. However, I didn’t find this “Mana” equivalent very effective so far, though maybe I still need to find artifacts that make better use of this resource.

Overall, the gameplay in Minecraft Dungeons is very accessible, and there’s actually no crafting at all (more on that later). The game is rated for ages 7 and up, and I found the enchantment system easy to understand and well-thought-out. It’s definitely not as complex as a real class system, but the possibilities still seem endless

A short adventure with good replay value

Minecraft Dungeons is a pretty short game, and I finished the 9 main missions in less than six hours, though there are some hidden levels to unlock if you take your time When you finish the game, you’ll unlock a new difficulty level with stronger enemies and new gear and artifacts to find.

All levels in Minecraft Dungeons are procedurally generated, which adds some replay value to the game. It’s also worth noting that every level has specific gear drops and artifacts to find, so you may need to play them multiple times to find the weapons and artifacts you’re looking for.

The story in Minecraft Dungeons is pretty barebones, and your main goal is to put an end to the Arch-Illager’s reign of terror. You’ll encounter the little tyrant multiple times during the game, and you’ll have to eliminate all of his evil minions to progress further. The pretty bland story is a bit of missed opportunity, especially since there are no real NPCs in the game.

Between missions, you’ll end up at your camp where you can find the blacksmith and wandering trader to exchange your gems for randomized gear or artifacts. However, these two NPCs have zero dialogue options, and you won’t find anything else to do in the camp. To my knowledge, there are also no sidequests, except for the hidden level I mentioned above.

As of this writing, I finished the game a second time and unlocked the “Apocalypse” difficulty level. I’m still having fun playing it and I’m able to find much better gear than before, but I hope the game will get more content soon. Developers Mojang and Double Eleven are already working on DLCs that will be included in the game’s Hero Edition, and you can already see these additional adventures on the Mission Select screen.

A little more polishing needed

Minecraft Dungeons is a fine game considering it’s priced at a very affordable $19.99, but there are certain things that left me scratching my head. First of all, the Windows 10 and Xbox One versions don’t share saves via Xbox Live, which is a very surprising omission considering that Xbox Live achievements are shared between both platforms. Cross-play multiplayer is also missing at launch, though Mojang said it’s coming in a future update.

I spent a couple of hours playing Minecraft Dungeons in online coop with a friend, and I was quite surprised to see that you can’t exchange gear with teammates. Loot is actually pretty rare in the game, and you’ll be very happy if you find 10 different objects on a level. As I wrote before, each level has a pre-defined selection of loot drops, so players looking for certain objects will have to complete the same level multiple times. Moreover, you can only exchange your money for randomized gear, and the two merchants in your base camp won’t allow you to buy what you want.

The latter point was probably the most frustrating thing for me in Minecraft Dungeons. If you’re a fan of certain weapons, bows, armors, or artifacts, it’s actually pretty hard to get more of them. Not only is the loot dropping insufficient in the game, but you can only spend your own money on randomized items, and you’ll often get the same midrange stuff over and over.  As a result, I often had to wait literally hours before I could upgrade my equipment for something better, and I think the game could really benefit from having a trading system between players, as well as real merchants in the base camp. You can’t even purchase arrows for your bow, and those are actually pretty rare to find on the battlefield.

My last point of criticism would be about the absence of crafting, which is pretty curious for a Minecraft game, as well as the absence of destructible elements. In the original Minecraft game, the exploding Creeper mobs create huge craters on the ground when they blow up, but the terrain is completely indestructible in Minecraft Dungeons. Even the rare TNT crates you can throw on enemies will leave absolutely no trace on the ground. That’s probably not that big of a deal in a dungeon crawler, but crafting and destructible elements play a key role in the original Minecraft game, so it’s pretty weird to see them completely missing in Minecraft Dungeons.

A perfectible but promising formula

Overall, Minecraft Dungeons is good value for a $20 game, and it will also be a good addition to Xbox Game Pass for PC and Console. It’s also great that the game is launching tomorrow on PlayStation 4 and Nintendo Switch, though it’s too bad that Microsoft couldn’t get cross-play multiplayer ready at launch.

Minecraft Dungeons certainly doesn’t reinvent the dungeon crawler style of games perfected by Blizzard’s Diablo series, but it does make it more accessible with a simple but versatile progression system. The main issue for me is the lack of content with a campaign that can be finished in six hours, and the game being generally too ungenerous with loot. The really good stuff is a bit too hard to find, and the game would certainly be more fun if it gave you more things to experiment with.

I’m hoping to see some gameplay improvements in post-launch updates, including the ability to trade loot with other players. A PvP multiplayer mode would also be interesting, especially since there are so many ways to customize your character with enchantments and artifacts.

If you plan to get the game on Xbox One, be aware that Minecraft Dungeons doesn’t support Xbox Play Anywhere or cross-saves with the PC version, which has to be purchased separately. Minecraft was already the rare exception in the growing pool of Xbox Game Studios titles that support Xbox Play Anywhere, so that’s not really surprising. Anyway, $20 is pretty cheap, and it’s even cheaper to try Minecraft Dungeons with Xbox Game Pass Ultimate, which is just $1 for new subscribers.

Minecraft Dungeons
Minecraft Dungeons
Developer:
Xbox Game Studios
Price:
Free


Seeing the 0xc0000006 Error (STATUS_IN_PAGE_ERROR)? Fix it

Some users have discussed a 0xc0000006 error on software support forums. That error arises when users try to launch some of their software.

The error message can have an error message that states: The application was unable to start correctly 0xc0000006. That’s a STATUS_IN_PAGE_ERROR which can often arise for users trying to run software from network volumes. If you need to resolve that error, check out these potential fixes.


This is how you can fix the 0xc0000006 error

1. Clean boot Windows

  1. The 0xc0000006 error can be due to conflicting third-party software, such as antivirus utilities. To clean boot Windows without any conflicting startup software, press the Windows key + R keyboard shortcut.
  2. Enter MSConfig in Run’s text box and click OK to open the window in the image directly below.
    MSConfig window 0xc0000006 Error (STATUS_IN_PAGE_ERROR)?
  3. Click the Selective startup items option.
  4. Deselect the Load startup items checkbox.
  5. Select the Load system services and Use original boot configuration checkboxes.
  6. On the Services tab, select the Hide all Microsoft services option.
    The Services tab 0xc0000006 Error (STATUS_IN_PAGE_ERROR)?
  7. Click Disable all to deselect all third-party services.
  8. Select the Apply option.
  9. Press the OK button to exit the window.
  10. Click the Restart option on the dialog box that opens.

2. Uninstall third-party antivirus software

If clean booting Windows does fix the issue, you’ll need to figure out what third-party program or service is conflicting with the software error 0xc0000006 arises for. It might be the case that your antivirus utility was the conflicting software. So, try uninstalling that antivirus utility and then restore your original boot configuration.

You can do that by entering appwiz.cpl in Run to open Programs and Features. Then select to uninstall the third-party antivirus utility from that Control Panel applet. Thereafter, restore your original boot configuration with MSConfig; and restart the desktop or laptop.


3. Run a system file scan

  1. Some users have confirmed a System File Checker scan can fix error 0xc0000006. To initiate an SFC scan, press the Windows key + S keyboard shortcut.
  2. Input cmd in the search box to find Command Prompt.
  3. To open an elevated Command Prompt, right-click it and select Run as administrator.
  4. Enter DISM.exe /Online /Cleanup-image /Restorehealth in Command Prompt, and press the Return keyboard key.
  5. After that, enter sfc /scannow and press Return to initiate the system file scan.
    sfc /scannow command 0xc0000006 Error (STATUS_IN_PAGE_ERROR)?
  6. If that scan repairs some files, restart the desktop or laptop.

4. Edit the registry

  1. Editing the Windows registry key might also fix the 0xc0000006 error for some users. To do so, open Run’s window.
  2. Enter regedit in the Open box, which will open the Registry Editor when you click OK. Open this registry key path: Computer > HKEY_LOCAL_MACHINE > SOFTWARE > WOW6432Node > Microsoft > Windows NT > CurrentVersion > Windows.
    The Windows key 0xc0000006 Error (STATUS_IN_PAGE_ERROR)?
  3. Select the Windows registry key.
  4. Double-click Applnit_DLL on the right section of the Registry editor.
    Edit String window 0xc0000006 Error (STATUS_IN_PAGE_ERROR)?
  5. Erase the number in the Edit String window, and click the OK button.
  6. Exit the Registry Editor, and restart Windows.

So, give some of those potential fixes for error 0xc0000006 a try. As a last resort, you could try reinstalling Windows with a repair install to reset the platform’s components.

If you can’t set up the installation media for a repair install, resetting Windows is an alternative method.

[wl_navigator]

Experiencing a domain server mismatch? Try these easy fixes

What makes troubleshooting a network or Internet connection particularly arduous is discerning between whether it’s a hardware issue or a software one.

For instance, as a Google Chrome user, you may have tried to access a website only to receive a message not dissimilar to this one:

This server could not prove that it is accesswebsite.com; its security certificate is from example.com. This may cause a misconfiguration or an attacker intercepting your connection.

For those who have the misfortune of using Internet Explorer or Microsoft Edge, your message may look like this:

The security certificate presented by this website was issued for a different website’s address.

Security certificate problems may indicate an attempt to fool you or intercept any data you send to the server.‘

The website you’re trying to access may very well be your own. If you trust the website you’re trying to access and would like to stop your browser from flashing this message in the future, the following guide will show you how.


What to do if my domain doesn’t match a server’s certificate?

1. Google Chrome Workaround

  1. Double-check the website‘s URL in your address bar.
  2. If you know it’s safe, click on ADVANCED.
  3. Click on Proceed to [websitename.com] (unsafe)

Google Chrome domain server workaround

Not so long ago, Google Chrome removed support for commonName matching in certificates. Because of this, it may cause domain name mismatch issues with older websites.

If you’re tired of seeing the above message for websites you’re trying to run locally or Google Chrome, you can disable it completely using these steps:

  1. Copy and paste this link into your Google Chrome address bar
    • chrome://flags/#allow-insecure-localhost
  2. Next to the flag labeled: Allow invalid certificates for resources loaded from localhost, click on the drop-down box and select Enabled.

Getting a NET:: ERR_CERT_INVALID error on Google Chrome? Try these easy fixes.


2. Microsoft Edge and Internet Explorer workaround

  1. Close Microsoft Edge/Internet Explorer and try to re-launch it with administrator rights.
    • Right-click on the shortcut and select Run as administrator.
  2. Launch the web resource or website giving you certificate issues.
  3. Click on Continue to this website (not recommended) if you’re still receiving a security certificate error.
  4. Your address bar should have an error message that reads Certificate Error.
    • An error dialog with the message Untrusted Certificate should appear next. Click on the button marked View Certificate.
  5. Click on the Install Certificate button.
    • It should be next to the Issuer Statement button. I
  6. If you’re presented with a warning message, click on the Yes button.
  7. On some versions of Windows, this will open the Certificate Import Wizard.
    • On the first screen, click on next.
  8. Click on the radio button labeled: Place all certificates in the following store.
  9. Next to the Certificate store text field, click on the Browse button.
  10. Scroll down and select Trusted Root Certification Authorities and then click on OK.
  11. If you can’t find the previous option in the Select Certificate Store screen, click on Cancel and select the radio button labeled:
    • Automatically select the certificate store based on the type of certificate.
  12. Click on Next.
  13. Finally, click on Finish.
  14. Close and relaunch Microsoft Edge/Internet Explorer.

3. Mozilla Firefox workaround

  1. From the warning page, click on the Advanced button.
  2. Click on the button labeled Accept the Risk and Continue.

4. How to solve a CN Mismatch Error for your own site

  1. Use a free online SSL certificate diagnostic tool such as GlobalSign to check whether or not there’s an actual certificate name mismatch.
  2. If you’re using GlobalSign and you have a certificate name mismatch then you should see an error similar to this one:
    Certificate name mismatch screen from GlobalSign
  3. Check and make a note of what certificates are installed on your IP address(es) or server(s) (if there’s any).
  4. Click on Ignore Certificate Mismatch or scroll down to the certificate information.
  5. If there’s a common name mismatch, you’ll see some red text indicating this next to your common names.
  6. Make sure that your common names and alternative names are correct.

The issue may be that the right website was not included in your common name(s) by mistake.

For instance, you may have purchased a certificate for a website with the common name www.windowsreport.com but you may have not added windowsreport.com in the list of Subject Alternative Names (SANs).

Consequently, you’ll need to contact the issuer of the certificate to change the SAN. In some cases, SSL companies allow you to modify some of the information on the certificate through a portal.

If you’re using a shared host, where a hosting company allows you to share an IP address with other websites, this could cause issues with your website.

You should also check your firewall and load balancer settings on the server-side. One of the most common issues may stem from an incomplete server certification installation.

In that case, you’ll need to deploy the chain certificate file to the server hosting your website.

This can be accomplished by downloading the chain certificate from the issuer and then installing it on the server. You’ll need to find your server-specific instructions for installation.

Most SSL/TLS certification errors can be solved by contacting the issuer. Either way, let us know how you managed to solve this issue by leaving a comment below.



[wl_navigator]

Is your AOL mailbox not available? Fix it in 6 easy steps

Most error messages give you hints to the cause of the issue, but not the AOL mailbox temporarily not available error. When you try to send a message, if you get this error, confirm that the receiver’s email address is correct.

After that, the next suspect is your internet settings. If the sender’s address is correct, and your internet is connected, the mailbox is likely unavailable due to a server problem or your browser.

On this page are the troubleshooting steps to fix your unavailable AOL mailbox.


How do I fix the AOL mailbox temporarily not available error?

1. Confirm the status of your AOL server

check aol server status for AOL mailbox temporarily unavailable

From the error message AOL mailbox temporarily not available, the most obvious suspect is the AOL server, if you entered the receiver’s email address correctly. You can check your AOL server status on different websites, such as Down Detector and Outage Report.

If the AOL server is down where you are, then you cannot do anything to fix your AOL mailbox that is temporarily not available. However, if the server is up, then the issue is local to your network.


2. Change DNS server configuration

change dns server config to fix aol mailbox temporarily not available

  1. On your computer, go to Control Panel > Network and Internet > Network and Sharing Center > Change adapter options.
  2. Next, configure the specific connection by right-clicking on it and clicking Properties.’
  3. Scroll down to Internet Protocol Version 4 (TCP/IPv4) and hit Properties.
  4. If Obtain a DNS address automatically is selected, change it to use the following DNS server addresses.
  5. Change the Preferred DNS server to 8.8.8.8.
  6. Next, change the Alternate DNS server to 8.8.4.4.
  7. Hit OK and reboot the computer to finally confirm if the AOL mailbox is temporarily not available still.

After saving this, flush your DNS cache. If you access the internet from a router, you may have to change the DNS server IP addresses on the router to fix AOL mailbox unavailable.

To change the DNS server configuration on your router, check either the DHCP or LAN settings. In the fields for DNS Server1 and DNS Server2, enter 8.8.8.8 and 8.8.4.4, respectively.


3. Disable security

mailbox unavailable fix disable antivirus and firewall

Antiviruses, anti-malware, and firewalls can block ports and connections you use for accessing your AOL mail.

After changing your DNS server configuration and restarting your machine, if AOL mailbox is temporarily not available still, then disable any security measure you have set up and retry.


4. Clear browsing data and disable extensions

clear browsing data to fix mailbox unavailable

  1. To view your browsing history on most browsers, press CTRL+H. On this screen, you can delete your browsing history, cached files, and data. On other browsers, you have to find and enter the settings page.
  2. From Settings, navigate to the Privacy and security section and look for the option to clear your browsing data. Set the time range for which you want the history removed and hit OK.

By browsing data, we mean internet browsing history, cache, and data. The process of clearing browser data differs from browser to browser, but the fundamentals are the same.

After clearing your browsing data for a more thorough process, it’s best also to disable all third-party extensions. Try sending the email again after doing these.


5. Use the basic AOL WebMail

aol basic version fixes unavailable mailbox issue

  1. To use the AOL WebMail Basic Version on your web browser, open basic.webmail.aol.com.
  2. There, enter your AOL username or email address and password, and hit Sign In.
  3. On signing in, the browser takes you straight to the main interface. Hit Email to start a new email and use the Send button to send it.

6. Retry after a while

Your AOL mailbox might as well be temporarily not available, not due to a wrong configuration or issue from your end; traffic problems can cause some AOL features to be inaccessible.

When a user attempts to use such a feature, AOL mail throws this error. If that is the case with yours, all you need do to fix this error but to wait it out.


Generally, the error mailbox unavailable or AOL mailbox temporarily not available is not a problem from you, unless you did not enter the receiver’s email address correctly. It means that the AOL service cannot communicate with the requested mailbox.

The standard solution is to wait and retry, but if that does not work and the AOL server is up, then clearing your browsing data, disabling your antivirus, and changing your DNS settings are solutions. If all fails, use the AOL Webmail Basic version.

[wl_navigator]