Windows Server provides quite a reliable platform for hosting programs or sites. But that does not mean it does not encounter errors, with the one that has been reported by many being the Server not operational message.
Of course, that’s not a pretty sight to be faced by any server operator. Nevertheless, it is also quite easy to set things right here. So, dig right in for the solution to the server, not the operational in the active directory issue.
How can I fix the server is not operational error?
1. Setting the right IP configuration
Check the IP configuration to ensure the gateway is configured to serve as the DNS server on the Domain Controller.
You are also recommended to change the IP configuration to either 168.1.33 or 127.0.0.1.
2. Turn off the guest account in the trusted domain
Click on Start, then Programs.
Select Administrative Tools, followed by Active Directory Users and Computers.
In the console tree, right-click on the Users.
Right-click on Guest in the details pane.
Select Disable Account.
3. Create a similar trusting domain user account in the trusted domain
Click on Start, then Programs.
Select Administrative Tools, followed by Active Directory Users and Computers.
In the console tree, right-click on the Users.
Point to New and select User.
Type details of the user already present in the trusting domain and then select Next.
Type in the existing user account password and then select Next.
Click on Finish.
Check if this solves the issue.
4. Resolving configuration error
Join the server to the domain, followed by configuring the server to be a domain controller.
This makes the Active Directory Domain Services (AD DS) Wizard in Server Manager use Kerberos authentication and not NTLM authentication for browsing the AD DS forest.
The above steps should be all you need to do to get rid of the encountered error contacting the domain the server is not operational error.
The performance of a drive while plugged into a router is guaranteed nowadays. It makes no sense to keep on checking the Linksys SmartWiFi settings. All it says is: There is no drive in the external port.
Additionally, this seems to be the case no matter how many times you try to refresh the setting.
If your Linksys router does not recognize the external hard drive, also known as a portable hard drive, there’s no better time than the present to take advantage of the solutions here presented.
Refer to the below lines instead to have a quick glance at potential fixes.
Steps to fix Linksys router doesn’t recognize the external drive
1. Do an upgrade to the router’s firmware
At one point, all routers reach what the manufacturer considers their end-of-life phase. Those models are downgraded to either having only critical security updates or they simply stop being upgraded at all.
Is that your router’s case? Assuming that it isn’t, upgrade it right away.
When the upgrade is finished, you can proceed with the reset procedure. This is one of the most common troubleshooting operations, but don’t forget to do it with the drive connected to the router this time.
To reset your Linksys device, locate the Reset button first. Its exact location will vary between devices, yet it is usually found on the back of the router.
Press and hold the Reset button for 10 seconds. This will initiate the factory reset on your Linksys router. The flashing Power LED means the reset is working.
If you don’t see it, press and hold down the Reset button for about 30 seconds while the router is powered on. Then, unplug the power cable from the router while still keeping the Reset button pressed for another 30 seconds.
Reconnect the power cable to the router and hold the same button pressed for another round of 30 seconds. Lastly, you can let go of the Reset button.
3. Connect the external hard drive to a computer
The hard drive can be connected to the outside of a computer through a USB connection that is often used to serve as a portable storage solution. Just test that it works to make sure it is not the culprit of this situation.
If you know of any other workaround to make an external hard drive work with the Linksys router, share it in the section below so that other users can try it as well. Also, don’t forget to leave there any other questions or suggestions that you may have.
Those who utilize the Microsoft SQL Server database management system (typically within Windows Server) might sometimes need to change sa user passwords. Users can do that with the SQL Server Management Studio.
However, a Cannot alter the login `sa` error might arise when users try to change a sa password. As a result, users can’t change the passwords when that issue arises.
How can I fix the Cannot alter the login ‘sa’ error?
1. Log in as administrator
Users usually can’t change the sa password because they don’t have sufficient admin permissions to do so. First, you’ll need to log out of Windows.
Then log back into Windows with an admin account added to SQL Server.
Launch the Microsoft SQL Server Management Studio software.
Select Windows Authentication on the Authentication drop-down menu.
Press the Connect button.
Click Security > Logins > sa on the left of the Server Management Studio window.
Click Status on the Login Properties – sa window.
Deselect the Login is locked out checkbox if selected.
Then click the General tab on the window to reset the password.
2. Modify the password with OSQL
If you still can’t change a sa password, try changing the password with the OSQL SQL server tool. First, log in to your Windows virtual private server.
Open the SQL Server Configuration Manager, which will usually be on the Start menu. However, you can also open it from its default WindowsSysWOW64 folder.
Select SQL Server Services on the left of the window.
Right-click SQL Server to select its Properties option.
Select the Startup Parameters tab on the SQL Server window that opens.
Then enter the following in startup parameter text box: -m;.
Press the Add button, and select the OK option.
A dialog box will then open. Click OK on that dialog box.
Click OK on the SQL Server Properties window.
Next, right-click SQL Server to select the Restart option.
Enter ‘cmd’ in Run’s text box, and press the Ctrl + Shift + Enter hotkey.
Then enter the query below in the Command Prompt. Replace the <SQL SERVER INSTANCE> with your SQL server name and <password> with your own password:
osql -E -S .<SQL SERVER INSTANCE>
exec sp_password @new='<password>’, @loginame=’sa’
go
alter login sa enable
go
exit
Return to the SQL Server Configuration Manager window.
Right-click SQL Server to select Properties again.
Select –m; in the Existing parameters box on the Startup parameters tab.
Press the Remove button.
Click the Apply option, and press the OK button on the dialog box.
Click OK to exit the properties window.
Thereafter, you’ll need to restart the SQL server again. Right-click SQL Server on the Server Configuration Manager window to select Restart.
Log in to SQL Server Management Studio with the new password you entered within the OSQL Command Prompt query.
Those are two ways you can fix the Cannot alter the login ‘sa’ error. First, try changing password with the Microsoft SQL Server Management Studio (as admin) and then OSQL.
If you have any other questions or suggestions, leave them in the comments section below and we’ll surely check them out.
One of the best and most accessible email clients that ever existed was offered as freeware by Microsoft, and it was called Windows Live Mail. While its glory days are well gone, some still prefer the simplicity and the features of Live Mail.
Unfortunately, some users have reported that they are receiving a pop-up window which states that:
Windows Live Mail could not be started. Closing Windows Live Mail
Your calendar contains corrupt data that is forcing Windows Live Mail to close. (0x8E5E0247).
What can I do if Windows Live Mail could not be started?
1. Remove the entire Windows Live Mail
On Windows Explorer navigate to: <User name>AppDataLocalMicrosoft
Remove Windows Live Mail
After applying these steps, start Windows Live Mail and re-enter all your email settings. As a precaution, you could make a copy of the original Windows Live Mail.
You could also try to perform a system restore for the day before. Plenty of users confirmed that this solved their problem.
The popup error will most likely not appear anymore for you either. If it does, just move to the next solution.
If System Restore isn’t working, don’t panic. Check this useful guide and set things right once again.
4. Choose Repair instead of Uninstall
Trying to uninstall seems to have cleared up the issue for many Windows Live Mail users, but others are still encountering it. Don’t go all the way this time, but choose Repair when presented the options to Uninstall or Repair.
Now, just rename the folder of the account you sign in to Windows Live Mail
Restart your computer for all these changes to take effect
Lastly, launch Windows Live Mail again
You may try to give a different name to your account’s folder used to sign in to Windows Live Mail. Further syncing your calendar does the trick, so just apply the above steps.
If all else failed, cloning the hard drive to get a bigger and faster one also does wonders.
Do you want more information regarding any of the previously mentioned solutions? Let us know in the comments section below.
Microsoft’s dual-screen smartphone, the Surface Duo, won’t be coming out for at least another 11 months, but if you’re excited about it, you can simulate the Surface Duo experience right on your own PC. This can be accomplished with the Surface Duo SDK recently released by Microsoft (and now for Mac).
This SDK is meant for developers to code and demo their apps on a simulated Surface Duo, but anyone with a good knowledge of Windows is free to try it on their own as well — regardless if they’re a developer or not.
In this guide, we’ll show you how you can try out the Surface Duo SDK and get a Surface Duo emulator on your Windows 10 PC to get a taste of that dual-screen Microsoft Android experience. But, be warned, this is a very technical process.
Some Prerequisites
Before getting started, there are some prerequisites you need to take note of. You’ll need to download a few developer programs to your Windows 10 PC, and you need to make sure that a few settings options are enabled.
Also, before installing, you’ll need roughly 15-20GB of free space on your PC, just to be safe. Additionally, please be aware that the Surface Duo emulator is very buggy, and doesn’t support the Google Play Store, so your experience will be very limited to the few stock apps, and trying out the user interface. Here’s a checklist for you.
Make sure that Hyper V, Hyper V Management Tools, Hyper V Platform, Virtual Machine Platform, and Windows Hypervisor Platform are checked under Turned Windows Features on or off section. You can find this by searching for Turn Windows Features on or off from the Start Menu.
Make sure your PC has 4GB of RAM at the least, though 8GB is recommended.
Make sure that hardware virtualization is enabled in your system BIOS.
Install the latest version of Android Studio, available from Google here. You’ll also need to use the SDK manager in Android Studio to make sure all of the Android emulation tools are installed.
Download install Visual Studio Community 2019 and make sure that all the Android developers tools are installed.
If you’ve already enabled the Windows Features above, and have support for Hardware Virtualization on your PC, you’re set to go. You can head to Google’s website an download Android Studio. It’s a 719MB file, so you’ll need to be patient. Once done, double click to run it, and be patient while it installs. You’ll need around 2.3GB of free space on your PC for the files as things are extracted during install. This step is very important, as Android Studio has the underlying Android files for the Surface Duo emulator. If you skip this step the emulator will NOT work.
After install, you’ll be prompted to import Android Studio Settings. Skip this, and choose to Do not Import Settings. You can then choose Standard and continue on. You’ll get to pick a theme, and then you’ll see a list of SDK components. Keep clicking the blue Next button, and then Finish. You’ll have to wait while the required SDK tools install. It’ll be roughly 500MB extra worths of files that need to be download and installed. Once done, click Finish.
Once that is done, you’ll be able to open Android Studio. Click Start a new Android Studio Project. Pick Add no Activity. Once the project loads, head up to the File menu and choose Settings. You’ll then want to click System Settings in the side bar and click Android SDK. Make sure Android 10 is checked on the list and that it says Installed. And check to see that Intel x86 Emulator Accelerator is installed under SDK Tools. You’ll also want to make sure that everything is enabled under SDK Update Sites. If not, click the respected boxes and click OK to install. Once verified, you can close Android Studio.
Step 2: Install Visual Studio 2019
Now that you’ve installed Android Studio, the second step is to install Visual Studio 2019. This is yet another free download if you choose the Community 2019 edition from the download page. Once the .exe is downloaded, double click to launch it. The Installer will then fetch files, it’s roughly a 71MB initial download.
When that initial download completes, the installer will launch Visual Studio 2019. Scroll down the list of Workloads and choose Mobile Development with .NET. You’ll then want to choose Install while downloading and then click the Install button. This will be a 7.26 GB download, and install will take roughly 10 or so minutes. Be patient.
Once everything is installed, you’ll get a prompt to sign in. Click Not now, maybe later. You can then choose your theme and click Start Visual Studio. Another window will then pop-up, and click Continue without code. This will open Visual Studio.
To continue, you’ll again want to make sure that all the relevant Android SDK tools are installed on your PC. You can do this by clicking the Tools menu, choose Android and then choose Android SDK Manager. Once selected, check to see that Android 9 or Android 10 are installed. If not, click the box, and Apply Changes to have VIsual Studio install it. You’ll also want to click on the Tools menu and expand the boxes for Android SDK Tools, Android SDK Build Tools, and Android Emulator.
Make sure you see that it says Installed under each of these. If not, you’ll want to click the box to have Visual Studio download and install. When finished, click Apply Changes. You can then close Visual Studio.
Step 3: Download the Surface Duo SDK
Now that you’ve got Android Studio, and Visual Studio 2019 installed, you’re free to install the Surface Duo SDK. This is the easiest step of them all. All you need to do is download the file from Microsoft’s website here. It’s roughly a 620MB download, so be patient.
Once downloaded, extract the ZIP to your PC somewhere, preferably in your documents folder. Once extracted, head to where the file was extracted to if you weren’t already taken there. You’ll notice a file with the Microsoft Logo labeled SurfaceDuoEmulator_2020.117.2. Click it, to run the installer. You’ll need an additional 3.6GB of free space for the emulator to install.
Once finished, a shortcut to Surface Duo Emulator will be installed on your PC. You’re now free to explore a simulated Surface Duo!
Have fun with the emulator!
Once you launch the Surface Duo Emulator, it will need some time to load. Depending on your PC’s hardware, it might take a few minutes. There’s not too much to the emulator at the moment, though, as it’s mainly meant for developers.
You can preview the Surface Duo dual-screen UI and open some of the stock apps like mail, weather, and Edge. You also can stack apps side by side, or hold an app to the middle to have it open up like a book on the large screen. Edge works fine and will allow you to open webpages. It’s a pretty cool experience if you’re using it on a Surface or touch screen PC. So be sure to check it out, and let us know your thoughts in the comments below!
When Microsoft initially made the plans to replace its EdgeHTML rendering engine with Chromium in the built-in browser for Windows 10, it also explained that it will also make contributions to the Chromium project. In other words, any changes made to the engine that now powers the new Edge could make its way to both browsers.
Well, it seems Microsoft isn’t only focused in improving the Chromium engine, as one of the developers has committed to bringing one of Edge’s most useful features over to Chrome and its open-source variant, Chromium. As anyone who juggles multiple browser windows at any given time may already know, both browsers allow a tab to be moved from to new windows or merged with others by it dragging out of the present window.
But Edge makes it easier by not just allowing the user to right-click any tab or multiple tabs and choosing a new window, but also allowing them to be moved into an existing one, as well. In an exchange between a Microsoft and a Google engineer on the Chromium bugs tracker, Google’s Leonard Gray asks Microsoft’s Justin Gallagher:
If you’re still interested in upstreaming this from Edge, we’d be happy to take it ?
To which Gallagher responded:
Sounds great! I’ll take ownership of this issue then.
Only weeks after the exchange, a commit was created by Gallagher and passed to the Chromium Gerrit. It’s especially interesting, given the bittersweet relationship between the two companies in the past, that developers from both sides are now working together to bring new features to both competing web browsers.
Microsoft’s “move tab to window” feature was one of the exclusive features of the classic Edge, and has since made its way to the new Chromium-powered version. Thanks to Microsoft, those who don’t see themselves ever leaving Google’s popular browser will also get the feature soon, as well.
Do you think Microsoft’s Edge has the potential to some day overtake Google Chrome? Share your thoughts below.
With most players having unlocked the majority of Fortnite’s Chapter 2 Season 1 content, many have been wondering when this current season will finally end and the next season will begin.
Epic Games has finally released some information on future content and it seems like Season 2 of Chapter 2 will need to wait for a rather significant update to go live in early-February which will transition the game to the Unreal Engine’s Chaos physics system.
The Unreal Engine update will bring the popular video game to Version 11.50 and Chapter 2 Season 2 content is expected to go live on February 20th.
No concreate info on Season 2 content has been announced but an official blog entry does tease that it “will feature — with multiple –.”
To keep players engaged until then, additional Overtime Challenges will be added and a new two-week event will also be held.
Are you excited for Fortnite Chapter 2 Season 2? What would you like to see in it or the new two-week event? Share your thoughts with the community in the comments below and then follow us on Pinterest and Facebook for more video game content.
Microsoft will provide a free Windows 7 software patch to solve a problem in the KB4534310 update it issued on January 14, 2020, the day it ended non-premium support for the operating system. The fix will be available to Windows 7 users, including those that haven’t signed up for paid extended security updates (ESU).
The bug may cause a wallpaper to appear black in the “Stretch” configuration. It doesn’t seem to have OS security implications, though, as it only affects desktop personalization.
The software giant has every reason to want to deliver a solution very soon, considering that some Windows 7 users are actually paying for such updates. The German government will be paying about €800,000 for ESUs this year alone. Likewise, many organizations and governments around the world are still counting on premium ESUs to keep their Windows 7 PCs secure.
While a fix isn’t available yet, Microsoft has said it will provide it in an upcoming release.
We are working on a resolution and will provide an update in an upcoming release, which will be released to all customers running Windows 7 and Windows Server 2008 R2 SP1.
It appears that setting the desktop wallpaper to options other than “Stretch” doesn’t cause any problems. So, before an update becomes available, Windows 7 users may have to make do with the fit, fill, tile, and center wallpaper settings.
The issue is also affecting custom wallpapers that don’t match the PC’s screen resolution.
Windows updates not always perfect
Windows updates, including security patches, don’t always work out as expected. For example, errors in the recently released Windows 10 Cumulative Update KB4528760 included the failure to install.
Since Microsoft has already turned its back on free Windows 7 support, it’s highly unlikely there will be another free update for the OS after the upcoming KB4534310 fix.
In the meantime, Windows 7 users not receiving ESUs can only turn to the latest antivirus solutions to secure their PCs. Although Microsoft is advising users to move to Windows 10, there are still millions of unsecured Windows 7 computers around the globe.
Laser printers are known to have the best quality prints though, as with every other gadget, there are times when the printer might malfunction. And one common issue to be faced with laser printers is that of double prints, or in other words, the printer is printing shadows.
Then again, there are ways to tackle the issue effectively and easily.
Fix laser printer if it’s printing shadows
1. Check imaging drum
A drum that is not discharging properly after each print job is a prime culprit for printing shadow prints.
This usually happens if the drum is nearing the end of its life cycle or is defective.
In that case, replacing the drum is the easiest option to get rid of the issue.
If the drum happens to be a part of the toner cartridge, you have no option but to replace the toner as a whole.
An easy way to know if the drum is the culprit is by looking at the prints. If the actual print and the shadow prints are quite close (about 2 – 3 cms), or the same as the drum’s circumference then the drum is at fault and needs to be replaced.
2. Check Fuser unit
A faulty Fuser unit can also lead to the printer printing shadows.
This usually happens if the Fuser is not able to heat the toner powder well enough for the prints to be sharp and precise.
Again, the best way to know if the fuser is malfunctioning is by looking at the prints.
If the actual print and the shadows are a bit further apart, about 4 – 5 cm, then the fuser has gone wrong and its best to replace the same.
3. Use the right paper
Make sure you are using paper of the right quality, one that is recommended to be used with the particular printer you are using.
Papers that are too glossy or thick are known to cause shadow prints.
4. Clean the Fuser roller of dust and other debris
Clean the printer as dust accumulation on the inside can also cause shadow prints.
You can use a lint free cloth to clean the fuser roller and adjoining areas to ensure there is no dust or other debris anywhere on the inside.
5. Humidity
All laser printers are designed to operate within a specific heat and humidity range, usually below 80 percent.
Make sure the place where you are operating the printer is within the safe range.
If the place is too hot and humid, this may cause the toner powder to clump.
This, in turn, will tend to cause the printer to print shadows.
6. Toner powder
The easiest way to find out if the toner power is causing the shadow prints is by visual inspection of the drum.
If the drum is seen to be covered by the toner, then the toner power is at fault.
This is due to the toner power not getting charged properly.
In that case, you might have to remove the old toner powder or replace the toner cartridge
This is all you need to do if your laser printer is printing shadow prints.
Technology is evolving more and more, and the general direction is to no longer have a hands-on approach in any of our activities. For example, a lot of users are replacing old-fashioned typing with voice-recognition software.
All you have to do is install the software, and everything that you speak will be turned into writing automatically. One of the best speech recognition software is Dragon NaturallySpeaking, as it has millions of users all over the world.
However, some have reported encountering issues with the program. After starting Dragon NaturallySpeaking, the following message appears when the user profile is loading:
User profile is not ready for dictation.
Since this essentially means that users can no longer use the program at all, it is indeed a serious issue. As such, we’ve decided to create a step-by-step guide that will show you how to bypass this problem.
How do I make my user profile ready for dictation?
1. Check the microphone connectivity
Make sure the Microphone is connected to the right socket as well
If it is a Bluetooth Microphone, make sure the Bluetooth detection is activated on both mic and PC
Use the Windows Sound Recorder to test if the microphone is working properly
2. Make sure the microphone is added as a sound source for that profile
Open Dragon NaturallySpeaking
Load the current user profile
This will occur automatically if there is only a single user profile
On the DragonBar, select Profile
Select Add dictation source to current User Profile
Click New if necessary and follow the steps to add an additional source
Clicking New is only necessary if this is your first sound source added
When prompted, select the dictation source from the drop-down menu
You should find your microphone listed here
Follow the instructions in the Audio Setup Wizard to configure the new source
By following these steps, your user profile should now be able to use Dragon NaturallySpeaking without any further issues.
If the problems persist, make sure you also try some of the following:
Check for conflicting sound devices
Try a different sound card or USB microphone
Test the microphone on another PC
Reinstall the sound card drivers
Update the sound drivers
Note: For more information on how to update drivers on Windows 10, check out this in-depth article.
If you’re aware of another way to solve this Dragon NaturallySpeaking , tell us about it in the comments section below so that other users can try it, as well.
Those of you that love mobile games but hate the concept of playing on your phone are probably well aware of what BlueStacks is.
For those of you that don’t know, the BlueStacks App Player is designed to enable Android applications to run on PCs running Microsoft Windows and Apple’s macOS.
This means that you can enjoy all of your favorite games on a machine that will never run out of battery, and that has much better performance than an average phone.
However, even BlueStacks has occasional bugs in the system. For example, users have reported that sometimes they cannot load files into BlueStacks because the folder containing them is not visible to the app.
So i’m trying to install an obb with which to install an apk, but i can’t figure out how to do so. i’ve installed es file explorer and fx file explorer to search for the windows shared folder, but on both applications the folder is inaccessible and greyed out. i don’t know why that is, or what i can do to fix it or bypass it. please help me, i’m at my wit’s end.
Since this bug prevents program functionality entirely, it has been deemed as a serious issue. As such, we’ve decided to create this step-by-step guide that will tell you exactly what you need to do to fix it.
How can I open folders in BlueStacks again?
1. Transfer the files to your phone
Open the File Explorer.
In the top toolbar, check to enable Hidden items and File extensions.
Go to the following folder: C:\ProgramData\BlueStacks\Engine\UserData\SharedFolder
Copy or drag the file you need to open into that folder.
Launch BlueStacks.
Access the Menu.
Go to Storage.
Select Explore.
Select the Windows folder.
Go to the BstSharedFolder. The file should be located there.
Copy it and paste it on the phone’s storage in the Android OBB folder.
By following these steps, you should be able to transfer files from your PC to your Android phone via BlueStacks. The method may seem a bit complicated at first, but unfortunately, it is the only fix to the issue.
2. Reinstall BlueStacks
2.1 Uninstall Bluestacks
Click the Windows Start button and select Settings.
Now select the Apps option.
Scroll down to find the Bluestacks app, click on it, then select the Uninstall button.
Follow the on-screen instructions to uninstall the app completely.
After the file has been downloaded, launch the executable file and install the app.
If you can’t manage to make BlueStacks work, it probably has some corrupt files or a broken component so it’s best to reinstall the app fresh.
This is a two-step process but if you follow the steps above you should be done with it in just a few minutes.
There is no information as to why this error occurs, but now at least you know of a good workaround.
If you’re having problems because some game is not playable in your region our list of the best VPNs for BlueStacks should come in handy to solve the problem.
If you want to read about more tips, tricks, and fixes about BlueStacks, leave us a message in the comments section below.
Microsoft decided to start off 2020 by ceasing support for Windows 7. This means that the OS will no longer be receiving any kind of updates neither in the form of new features, or security patches.
This leaves Windows 7 users with very few choices, including the following:
Of course, migrating to an entirely new OS is difficult at a large scale, such as within a company. that is why steps need to taken in order to ensure that everything goes smoothly.
How ever, this takes time, during which their computer systems are vulnerable to outside cyberattacks. Such would be the case with QuickBooks and TurboTax users that are still using Windows 7.
Windows 7, QuickBooks and TurboTax
Since Windows 7 is no longer receiving security updates, this means that all of your data is in a vulnerable state. If you are using any type of accounting software, or are performing banking transactions or online shopping, you are exposing yourself even more.
Such would be the case with QuickBooks and TurboTax. While their respective developers do continue to make clients that are still compatible with Windows 7, it is not clear how much longer this will last.
Even the developers of QuickBooks and TurboTax recommend that users migrate to Windows 10:
TurboTax for tax year 2019 and QuickBooks 2020 will install on Windows 7 (Service Pack 1 or later) PCs. However, we strongly recommend upgrading your operating system before installing these products.
While you can use TurboTax and QuickBooks Desktop on any operating system listed in the products system requirements (Windows 8/Windows 8.1/Windows 10), Microsoft recommends that Windows 7 users upgrade to Windows 10.
They went on and added that once you’ve upgraded to Windows 10, you can continue to use the software without repurchasing it.
Once you’ve upgraded your Windows operating system, your current version of TurboTax or QuickBooks Desktop will work on your PC. You don’t have to buy them again.
As such, sooner or later you will still need to upgrade to another OS, and do something to keep your data safe.
Keep your QuickBooks and TurboTax data safe
Since QuickBooks and TurboTax work with sensitive information such as addresses, bank account numbers, passwords, it is necessary to take all the measures needed to keep the data safe.
If migration is not yet an option, and you do not have the budget to go for the WIndows 7 Extended Support, you could always opt for a third-party antivirus tool that will keep you safe.
For the best antivirus programs that work on Windows 7 for banking programs, check out this in-depth article. Additionally, changing your Internet browsing habits can take you a long way.
If you want to learn more about how the end support of Windows 7 affects various software, leave us a message in the comments section below.
Netgear routers, like all other routers, have settings pages you can open in your browser. However, some Netgear router users have said in forum posts that they can’t log in to the settings pages for their routers with their admin passwords.
Some users have said a 192.168.1.1 refused to connect error arises when they try to open their router settings pages. Below are some of the resolutions that might fix the Netgear passwords not working.
How to fix Netgear router admin password is not working
1. Double-check the login details for the router
First, make sure that you’re really entering the right default password for your Netgear router. The Netgear Router Password page includes a full list of default login passwords for the various router models.
Open that page in a browser to check the login details for your router model. You might also find the settings page’s login details on a sticker at the bottom of your router.
2. Don’t rely on saved passwords
Make sure your browser isn’t trying to log in to the router’s settings page automatically. Your browser might automatically input a saved password for the router settings page. If so, erase that password. Then enter the default password for the router yourself.
3. Turn off third-party antivirus software
Third-party antivirus utilities also block access to routers’ settings pages. So, try turning off third-party antivirus software by right-clicking their system tray icons and selecting a turn off or disable option.
If you can’t find a disable setting on the context menu, open the antivirus utility’s primary window and have a look through its settings tab. After that, log in to your router’s settings page with the antivirus software disabled.
4. Disable all browser extensions
Some users have confirmed they’ve fixed router settings page login errors by disabling browser extensions. To do that in Google Chrome, click the Customize and Control Google Chrome button.
Select the More tools > Extensions options to open the tab shown directly below.
Click the toggle switches on the extensions there to turn them off.
5. Reset the browser
If you have lots of extensions, resetting the browser to its factory settings can be a quicker way to turn them all off. You can reset Chrome by entering ‘chrome://settings/’ in the browser’s URL bar and pressing Return.
Scroll down and click the Advanced button.
Click Restore settings to their original defaults at the bottom of the Settings page.
Then click Reset settings to restore the browser to its original settings.
6. Reset the Netgear router
It might be the case that the Netgear router’s password has been changed from the original default one. However, you can restore the original login password by pressing the small reset button at the back of the router with a paperclip.
Press that button for about 20-30 seconds until the router’s lights start blinking. In addition, turn the router off and back on after resetting.
Those are some of the most probable resolutions for fixing admin password login issues for Netgear routers. For further potential fixes, users with MyNETGEAR accounts can submit support issues at the Netgear website.
If you have any other questions or suggestions, see the comments section below.
If you own a Linksys router and are unsuccessful in inputting the password for it via the control panel, then you aren’t the only one.
This is a common problem many users face, and because of that, we’ve decided to create a detailed article on how to fix it.
What can I do if my Linksys router is not accepting the password?
My Linksys router will not let me log in
1. Check if you can ping 192.168.1.1
Start the troubleshooting by wiring a computer to your router. Just open the Command Prompt to see if you can ping 192.168.1.1. In case of getting five good replies, then your router is not defective or anything.
It’s most likely a glitch causing this, so type 192.168.1.1 on the same command prompt window. Press Enter. This should normally launch a browser and you will get the prompt for username and password.
2. Upgrade the firmware
Various errors happen to routers whose firmware hasn’t been updated. That’s why we further suggest that you upgrade the firmware of your router as soon as possible.
3. Reset Linksys to factory defaults
If the log-in window refuses to accept your password no matter what you do, it’s time to reset the router to factory defaults. To do so, press and hold the Reset button from the rear side of the device for about 10 seconds, until the power LED starts blinking.
Be careful that some older Linksys routers still require you to press and hold the Reset button for 30 seconds to get the same result.
To complete the procedure, unplug the power cable from the router for 30 seconds more. Lastly, plug it back in. This will erase all the settings, so you’ll need to completely redo your configuration.
You’re most likely trying to get into your router‘s configuration page. You are supposed to enter admin, but the log-in box doesn’t accept it and merely erases what you typed in.
In case of any security gaps, then perhaps someone wirelessly connected to your router and changed your password. Also take into consideration to have changed it earlier by yourself, while the first-time installation.
2. Reset your router to factory default settings
If applying the above steps doesn’t seem to have any effect, turn on the router and wait until the Power light is blinking. Up next, press and hold the Reset button for 10 seconds (or more on some models).
Finally, unplug the router to turn it off, wait 30 more seconds, then plug it in again to turn it back on. This procedure will erase its current settings. Hence, you will need to reconfigure the router settings.
3. Set Auto Login on your browser
If you’re using Google Chrome, select Preferences, then click on Advanced to expand the options. Toggle Allow Chrome sign-in to the On position with the current username and password.
Follow a similar procedure on any browser you might currently use and put a checkmark on automatic log-in to further prevent this situation.
My Linksys router will not let me change password
1. Update Linksys firmware
If you can change any other settings on the router, but not the security, it’s time to update the router‘s firmware.
See it as an operating system for your Linksys wireless router. Your router won’t be able to function properly unless you keep it up to date.
Apply this procedure on the particular browser that you’re using. If it’s Google Chrome, press the three horizontal dots on the top right corner. Then, click Clear browsing data on the History page.
At the top, choose a time range or select to delete everything. You could also tick the boxes next to Cookies and other site data and Cached images and files. Click Clear data.
If you also want to clear the auto-fill data in Chrome, follow the simple steps from this useful guide.
3. Fully reset Linksys to the factory default settings
Sometimes, simply rebooting your router will solve the problem. To do this, remove the power cable. Let your router sit for 10 seconds, and plug it back in.
If power cycling the router made no difference, set it up from scratch and see if it’ll let you change the admin password.
Tell us which of these solutions helped you with your Linksys router issue in the comments section below. Also, leave there any other questions or suggestions that you may have.
As you may have noticed with most router fixing guides, the ultimate solution is usually to reset it and then re-do the settings. However, some routers have issues with this operation.
For example some, Linksys routers don’t seem to reset, even when you push the button in the back.
This is a rather common problem, so we’ve decided to create a step-by-step guide to show you how to reset your Linksys router with ease.
What can I do if my Linksys router will not reset to factory defaults?
1. Perform a 30/30/30 reset
While the router is plugged in and powered on, press and hold the Reset button for 30 seconds.
Unplug the router from its power source, while still holding down the button for 30 seconds once more.
Then, turn the power back on.
Continue holding Reset for another 30 seconds.
Release the Reset button and leave the router for about 10 seconds.
Disconnect the power cord for another 10 seconds, then reconnect.
This option is pretty straightforward as all you have to do is to press and hold this button for about 10 seconds until the Power LED will start flashing.
When this doesn’t work, reset the device to the factory default settings using the 30-30-30 method. Your router should respond to the 10 seconds reset method, but this approach won’t do any harm either.
Note: once you have successfully reset your router, you will need to reconfigure its settings.
The management screen should appear without any login or password needed.
Go to Setup > Mac Address Clone, and enable it.
Press the Clone button.
Next, hit Save settings.
Go to Administration to set a new password.
It will kick you out, so log back in with the username and your new password to make sure everything is correct.
Close the browser.
On the PC, set the IP back to Automatic, then repair the connection.
Check the status to make sure you have an IP Address in the 192.168.1.xxx network.
After performing all the above steps thoroughly, open your browser for a quick Internet test. If you can’t connect, unplug both the modem and the router. Wait 30 seconds, then plug the modem in first.
Make sure the modem is ready to go before plugging the router back in too. Once the router is operating, repair your connection on the PC again. You should be able to access your Internet connection now.
If you have any other questions or suggestions, reach for the comments section below.
One of the inherent positives of the Mixer Platform and a prime reason contributing to its popularity is the feature that allows you to broadcast your channel so that your friends and followers have an inkling of what you are up to. Similarly, you also get to see what your friends are up to though unfortunately, there are times when the broadcast feature might start acting bonkers.
However, as with most issues, it’s easy settings things right when Mixer won’t broadcast properly. For the record, this issue might occur irrespective of whether the app is being used on a Windows 10 or on an Xbox device.
Power off the Xbox One console by pressing and holding on to the Xbox button on the console for about 10 secs, or until the console shuts down completely.
Unplug the power cable from the console. Leave it in this state – unplugged – for at least 10 secs.
Plug the power cable back in.
Start the console by pressing the Xbox button.
This should help if you are unable to broadcast on Mixer.
4. Set broadcasting option to On
Click on Start > Settings on your Windows 10 device.
Click on the Gaming
Under Game bar, make sure the option Record game clips, screenshots and broadcast using Game bar option is set to On.
Close Settings.
You should now be able to stream unhindered.
If needed, relaunch the Mixer app and attempt streaming from scratch.
5. Contact Mixer
Sometimes, the issue might be with the Mixer platform itself. In the case, get in touch with Mixel via Zendesk.
This will apprise them of the issue and hopefully, a solution is made available quickly enough.
This should be all you need to do if faced with the situation when Mixer won’t broadcast.
Meanwhile, here are some related topics to browse.
Has your Linksys router ceased working after a power outage? Cases like yours are inevitable. Once you experience power outages, everything that runs on an electric current shuts down and your router is no exception to that.
A brief power interruption isn’t the only thing making your router unable to work. Sometimes, a reset has the very same outcome.
Since these problems are very common, we’ve decided to create a step-by-step guide that will tell you what to do in case your Linksys router is no longer working.
What can I do if my Linksys router is not working?
How can I fix a Linksys router that’s not working after a power outage?
1. Reboot your router
Unplug your router from the power and check the power supply.
Remove all cables from the router.
Then, plug them back and make sure the wires are connected properly.
2. Release and renew the IP addresses
If you still cannot maintain an Internet connection for longer than a couple of minutes after rebooting your router, it’s time to move on to the next step. Start from here: your router gets its IP Address from the ISP modem.
Therefore, try connecting to your router’s admin page, then release and renew its connection to your modem. You may do the same on your computers.
Afterward, turn off the computers, the router, and the modem. Wait a minute to turn on the ISP modem. When the status lights indicate it’s ready, also turn on the router. After a 60 seconds break, finally turn on your computers.
3. Clone the computer MAC
On your computer, follow this path Setup > MAC Address Clone.
Log into the browser-based utility.
Click the Setup tab.
Click the MAC Address Clone page.
Then, click Enabled.
Click either Clone My PC’s MAC or enter the 12-digit MAC address of your old router.
Click Save Settings.
In any Ethernet network, a list is maintained to identify which MAC corresponds to what IP. The power outage might have caused your ISPs to refuse the home network.
That’s why you should now clone the MAC address that was originally set up. Afterward,, reboot everything and confirm that things are back to normal.
4. Reset Linksys to its factory default settings
You can also try to reset the Linksys router to its factory default settings. With the Power LED of the router blinking, press the Reset button. Hold it down for 30 seconds to complete the reset process.
What can I do if my Linksys router is not working after reset?
1. Apply additional power cycling
After performing the reset, the Power LED of the router will keep on blinking for a few seconds. However, if it isn’t stabilized after a minute, power cycle the router. Just unplug the power cord from the power outlet, wait for 30 seconds, then plug it back in.
Make sure the power adapter is properly plugged into your Linksys router and to the available power outlet. Let’s see if it’s working now.
2. Check static/dynamic IP – DHCP server relation
If it’s not, you might have set a static IP to your device and your DHCP server is still enabled. Try logging in to your router by accessing its classic web-based setup page. Open any web browser at your choice and enter 192.168.1.1 in the Address bar.
Press Enter and you will be asked for your login details. Up next, check if this feature is enabled. In case it is, disable it and check if your IP address is static. If it is static indeed, then it should work just fine.
If it is dynamic, try enabling the DHCP feature back. In this case, the DHCP server should remain enabled. Disabling it will simply make your router work as a switch, allowing just one computer to have Internet access.
3. Use default gateway to establish Internet connection
Press the Windows key and the R key at the same time to open the Run command box.
Type cmd.
Then, type ipconfig.
Press Enter.
Here you will find the default gateway. Enter it in the URL of your browser.
It will ask you for your username and password.
Once you enter this info, the computer should accept Internet connection.
If you can only connect to the Internet through your modem and not through the router, these steps could help. Connect the cable from the modem to the router, then the router to the computer by using a LAN cable. On your Windows computer, just find the default gateway.
If you have any other questions or suggestions, don’t hesitate to leave them in the comments section below.
The Microsoft Windows OS comes with a variety of tools that make it a very family-oriented tool.
For example, users of Windows 7, 8 and 8.1 can create family Microsoft Accounts with child sub-accounts. They can then limit and monitor their activity via the parental controls attached to them.
However, this will change in the future.
No more Windows 7 Family Safety alerts
In an official statement of Microsoft forums, it was announced that Windows 7 devices with Windows Live Family Safety installed, or Windows 8.1 with Family Safety will have the optional online services discontinued.
Your device will continue to enforce the limits you set, but soon, you will no longer receive emails of your kids’ device and internet usage from Windows 7 or Windows 8.1, or be able to see usage and set limits at account.microsoft.com for these older devices. Setting limits and viewing usage will still be available in the User Accounts & Family Safety control panel on your device.
No explanation as to why this change will be implemented was given. However, those that use parental restrictions to their children’s sub-accounts are most likely not happy.
If you never used the feature or checked that you have no parental restrictions applied to your account, it means that this change will not affect you at all.
However, Windows 7 users should uninstall the Windows Live Family Safety app. This is simply because soon it will be just taking up space.
Do you have any other questions or suggestions regarding the Windows 7 Family Safety feature? Don’t hesitate to reach for the comments section below.
In some rare and frustrating situations, you might encounter some Windows Live Mail login password problems. In some cases, users complain that the email client is not accepting their password.
This happens even if you are sure that you are typing the correct user ID and password combination. In this guide, we will show you how to solve the problem and regain access to Windows Live Mail.
Why won’t Windows Live Mail accept password?
Below are some of the potential causes of the Windows Live Mail login password problems:
Wrong internet options: Some users have reported this problem to be due to problems with some of their internet options. You need to make the necessary changes to your internet options.
Corrupt system files: If your system files are faulty or missing, you can encounter this password problem. The solution to this is to repair these corrupt files.
What can I do if Windows Live Mail is not logging in?
1. Have a quick look at Internet Options
Press the Windows key + R, type control, and click OK.
Select the Network and Internet option.
Now, choose Internet Options.
Click the Advanced tab at the top.
Next, ensure that Use TLS 1.0, TLS 1.1 and 1.2 are selected, while SSL 2.0 and 3.0 remain unselected.
Finally, select the Two-step verification option and follow the onscreen instructions to disable it.
If you started facing Windows Live Mail login password problems after enabling two-factor verification for your Microsoft account, you need to disable it to fix this issue.
Press the Windows key, type cmd, and click Run as administrator under Command Prompt.
Type the command below and hit Enter: sfc /scannow
Finally, wait for the command to finish running and restart your PC.
In some cases, the Windows Live Mail login password problems can be due to issues with your system files. You can fix this by running an SFC scan and restarting your PC.
Alternatively, you can employ a top-notch third-party tool to fix this issue and replace the missing files with the original version generated from your PC cache.
4. Reset your password to fix Windows Live Mail error 0x800CCC92
From the official login page, enter your email ID and click Next.
Click the Forgot password? link below the Sign in button.
Finally, click the Reset your Password option and follow the onscreen instructions to complete the process.
5. Use third-party email client software
Another quick and secure solution would be to use a reliable third-party email client service that enables you to access your Live Mail account with minimal effort.
Desktop email client programs like Mailbird support IMAP and POP3 technology that connect you to other email providers automatically. All you need to do is enter your Live Mail address, and the advanced software will detect the server settings instantly.
Microsoft Search, the enterprise search platform designed to bring personalized searches across Office 365, Windows, and Bing is about to get a bit more useful. Indeed, Microsoft has announced that Microsoft Search now has an acronym answer feature (via MSPU).
According to Microsoft, with this new feature, users will be able to navigate their company’s confusing lingo. This is especially important, as Microsoft claims that 2-3% of search queries entered by employees are related to acronyms.
The new feature lets Office 365 Admins create custom definitions for any acronyms used within a business. Once acronyms are created by an administrator, Microsoft Search will be able to pick out the acronyms on company internal websites, documents, and Teams, Yammer, and other areas of Office 365. Users will also only see Acronyms mined from data that they already have access to.
Results and definitions will appear in a list in Bing as it does in the image above, with an ability to see more results if needed. The original location of the acronym will also be listed, for added convenience. And, if there are no internal definitions available, Microsoft Search will show results from Bing instead.
With the news that Microsoft will be making Bing as the default search engine for Chrome users with Office 365 ProPlus, it’s becoming more important to understand the purpose of Microsoft Search. The search platform was first announced at Ignite 2018 and hit general availability after Build 2019. We’re planning a new Office 365 series with tips, tricks, and explanations around Microsoft Search, so be sure to keep tuned for more in the days ahead.
Microsoft Teams is used by many organizations across the world, so there might be a day when you get an invite to a Teams Meeting for a job interview or another occasion. However, you might not have a Microsoft Teams or organizational Office 365 account just yet. There’s no need to worry, though, as you can easily join a Teams meeting without an Office 365 account. Here’s how.
Check your email for the Teams Meeting invite
The first step in joining a Microsoft Teams meeting without an Office 365 account is simple. You’ll first want to check your email for the invite. You’ll then want to click the link on the bottom of the email that says Join Microsoft Teams Meeting. Once you click that, you also can Accept the invite to add it to your calendar in your email.
Open Teams on the web or download the program
Next, you’ll see that after clicking the link, you’ll have the choice to Download the Windows app, or join on the web instead. If you choose to join the meeting on the web, you’ll have a web-based version of Microsoft Teams. Your browser will then ask you to use your webcam and microphone, so be sure to accept both. This ensures you’ll be seen and heard during the meeting.
Get ready for the meeting
Once you’ve launched Microsoft Teams, you’ll have to enter your name and choose your audio and video settings. You can toggle off your microphone or webcam. You also can choose a different device for audio, if needed. Once you’re ready, you can click the purple Join now button.
Enter the meeting lobby
Finally, you’ll be put into the meeting lobby. Once you’re in the lobby, the meeting organizer will be notified that you’re there, and you’ll be admitted in. If no one has admitted you to the meeting within 15 minutes of joining, you’ll be kicked out from the lobby, and you’ll need to join again. It’s also worth noting that you won’t have full access to some of the features in the Teams meeting.
That might include Microsoft Whiteboard, Meeting Notes, and some of the other collaboration features we’ve previously talked about. Feel free to check out or other coverage of Microsoft Teams here via our dedicated news hub, and be sure to keep it tuned to OnMSFT for all your Teams news and information.
Microsoft officially ended support for Windows 7 two weeks ago, but the company has since acknowledged that the latest “Patch Tuesday” update for the 10 years-old OS has introduced an unexpected wallpaper issue (via The Verge). This is a minor bug that may cause your wallpaper to appear black when set to “Stretch,” but the company said that this will be fixed in an upcoming update.
In the known issues for the latest Windows 7 patch (KB4534310), the company explained that users affected by this wallpaper bug can mitigate the issue by either choosing other alternatives to Stretch including Fill, Fit, Tile, or Center, or by simply switching to wallpaper that matches the resolution of their desktop. “We are working on a resolution and will provide an update in an upcoming release, which will be released to all customers running Windows 7 and Windows Server 2008 R2 SP1,” the company said.
It’s quite embarrassing for Microsoft to introduce a bug in the last public patch for Windows 7, but it’s good to see that the company will act on it as soon as possible. It won’t be the first time that Microsoft releases a patch for an unsupported version of Windows. As an example, the software giant did release an emergency patch for Windows XP following the discovery of the “WannaCry” ransomware exploit.
However, the company invites Windows 7 users to upgrade to Windows 10 as soon as possible, while organizations that are not ready to upgrade will be able to pay Microsoft for Extended Security Updates for three more years.
Setting up a connection between your Linksys router and a printer should be easy. Linksys provides quick and easy setup, but sometimes it may have issues connecting to some printers.
If you too are among those that have encountered this problem, check out the article below for several fixes regarding the matter.
What can I do if my Linksys router won’t connect to the printer?
1. Install Linksys Connect software on your computer
Insert the Setup CD on your computer’s CD drive.
Click Run.
On Mac computers, the Linksys Connect Software should run automatically as soon as the setup CD is inserted into the CD drive.
Read the Software End User License Agreement, then click Next.
Click Next after following all detailed instructions on how to connect both the power cable and the modem to your router.
Select Yes, install Linksys Connect on the new prompt.
Click Next.
Enter your router’s password screen in the blank field.
After that, click Next.
You should be prompted that you are already connected to the Internet.
Click OK.
Eventually, click Done on the Linksys Connect main menu.
Install Linksys Connect software version 1.4 or higher on all computers within the network where you want to print from. This can be easily accomplished by following the above steps.
Keep though in mind that you need to temporarily disable any firewall software on your PC if you want to complete the procedure.
2. Update your Linksys router firmware
Your Linksys router should be working properly when you want to connect pretty much any machine to the router, not just the printer.
If you’re inclined to forget all about installing the latest firmware to your router, your best bet now is to check out the newest version supported.
3. Double-check your router’s wireless settings
To connect a wireless printer, you need to know your router’s wireless settings. They are supposed to be used to synchronize the printer’s network settings with that of your router.
Any mistake prevents creating a wireless connection between them, so double-checking cannot hurt.
4. Ensure your printer software and drivers are installed
Connecting a wireless printer to your Linksys router is impossible without the proper printer software and drivers installed on the computer that you intend to work on.
You may refer to your printer’s documentation or the manufacturer’s online support for further instructions on the topic.
Alternatively, you have the option to automatically install missing drivers or update existing ones using a specialized tool designed to manage all your drivers correctly, without causing any system problems.
5. Allow Windows Firewall access or temporarily switch it
Even though the router and the printer are doing most of the work, they need help from other components to complete the connection job.
In most cases, the Windows install of the printer through the router requires allowing Windows Firewall access. There are also times when temporarily switching the 3rd party firewall tools is needed.
6. Check out your wireless printer
Is your wireless printer about 3-10 feet away from the router when setting up the wireless connection? If not, bring it closer since longer distances affect connectivity.
Even more, for things to function properly, the printer needs to support the WPA™/WPA2™ wireless encryption standard.
If you are aware of any other solutions that can quickly solve the issue, share them in the comments section below so that other users can try them as well.
Let’s cut to the chase: the server not found error in your Linksys router shouldn’t be there to stay. You might have more desktops and laptops connected by wire to the router. Everything used to work fine for a while.
Anyway, when you try to disconnect the laptop and connect wirelessly, you eventually get this DNS error most of the time. Things get back to normal when reconnecting the laptop by wire.
The story is no different when wireless shows connected, but you get the same Server can’t be found message when you try to open your browser. What are you missing?
We’ll give our very best to resolve your issue in an uncomplicated manner.
What can I do if my Linksys router’s server is not found?
1. Reboot your router via a power cycle
Start by rebooting your router. Disconnecting it from its power source, and then plugging it back in is all it takes to perform this procedure.
Following this, the default administrative username is either blank or “admin”, while the default administrative password is usually “admin”.
Sounds easy enough, right? And it isn’t just simple, but also efficient most of the time.
2. Configure Linksys router to connect to the Internet
If the problem persists after performing a power cycle, you may need to proceed with other workarounds. This includes reminding you that there are two connections involved when setting up any router: broadband and LAN. These connections are mutually exclusive.
In other words, your Linksys needs to be connected to the Internet through the broadband connection as well. If the cable broadband does not usually require a login, DSL/ADSL/VDSL use PPPoE which requires login data.
Call your ISP and ask details about what type of broadband connection you have. Once having the answer, configure your router to connect to the Internet. Then, share this connection with any computer connected to it through the LAN.
3. Update the firmware to the latest version
Free up yourself from having to experience these servererrors by making sure you constantly update your router firmware. The closest interaction you probably have with your Linksys router is the occasional reboot described above.
Keep in mind that the manufacturer rolls out a few software updates throughout the year to address all bugs and vulnerabilities, so don’t postpone the update.
Other users also tried to open the Command Prompt and run IPCONFIG /ALL to see info on their wireless connection. They’ve noticed a sudden change in the IP Address. That’s why they can connect wirelessly on occasions, and receive this DNS error most of the time.
We hope you will go past this issue with the solutions mentioned above. Do you know any other tips that may help? Use the comments area to let us know.
Projector fan not working to the optimum, or not turning on at all is a common problem to be faced with projectors. This also is a pretty much serious issue as a non-functional fan is almost as good as the projector on the whole ending up being a dud.
That’s because a dead fan will not be able to eliminate the heat from the inside, leading to the projector getting too overheated to remain operational. However, there are ways to overcome the issue effectively. Read on!
Here are the things to do if the projector fan won’t turn on
1. Check if any debris is hampering the fan’s operation
Make a visual inspection to see if there is anything that has got lodged between the fan blades and the housing.
Sometimes, just removing the debris and cleaning the area is all that might be needed for the fan to work normally again.
2. Fan/ projector motherboard might have become faulty
There is every chance the fan itself might have developed a snag if not the projector‘s motherboard itself.
The best way to diagnose such an issue is to install another fan in the projector or install the fan in another projector.
If things are fine in the first instance, then the issue is with the fan.
In that case, replacing the fan is all you need to do.
However, if it’s the second instance where things proved to be right, that is the fan is working fine, then the issue could be with the electric circuitry that supported the fan.
In the worst-case scenario, there could be something wrong with the project’s motherboard itself.
Get in touch with the company support staff in either case.
Vents becoming blocked could also lead to the fan not working.
The obvious solution here is to clean the vents using an air pump or anything of that sort.
Ensure the projector has a proper airflow which is necessary to ensure the smooth operation of the fan.
4. Check lamp life
Turn the projector off and wait for some time.
Restart the projector.
If the projector has been working with the lamp life having exceeded its normal span, then the best and safest option for you will be to replace the same.
You will then be required to reset the lamp timer. (Get help from support staff if needed.)
Replacing the lamp is indispensable — if the lamp life is exceeded, the lamp timer sets automatically to zero.
In that state, the fan becomes inoperative.
Replacing the lamp will make the fan function normally again.
5. Check if filter door is properly latched
Check if the filter has not become clogged.
If that be the case, cleaning the filter will enable the fan to work normally again.
Also, ensure the filter door is not left open as this too makes the fan stop functioning.
This should be enough to deal with the situation when the projector fan does not turn on. For company specific issues, get in touch with the respective support department. In any case, it is recommended to seek help from experts in the field in any of the steps mentioned above if you aren’t comfortable handling things on your own.
If you own a gaming console, you are supposed to easily connect it to your router. That’s not always the case and sometimes, your Linksys router cannot connect to a Xbox.
If you’re passionate about gaming, chances are you own one of those router models claiming to eliminate lag and offer the advantages of that innovative prioritization engine networking technology. So, what went wrong?
Some users claim their Xbox can see the network, but will not connect. Others describe performing an entire ritual for one-time connections. This includes removing the password, factory resetting the Xbox, and then connecting to it. Once they turn the Xbox off, it cannot reconnect.
Are you experiencing a similar problem and troubleshooting it gave you a headache? These solutions may help you out.
How can I fix a Linksys router that’s not connecting to a Xbox?
1. Reboot your router
The most basic way to attempt to fix this connection problem is to reboot your router. It’s a relatively simple process that requires unplugging the power cord, waiting for 30 seconds, and then plugging the power connector back in.
Doing this can also increase your network security, as well as upload and download speeds.
2. Update the firmware of your Linksys router
Yes, that’s definitely a chore, but don’t postpone the inevitable. You’re already facing difficulties such as the impossibility to connect to Xbox.
Once you update the firmware, you will rest assured in terms of security, speed, and potential bug fixes that you obviously need.
Launch a web browser and enter 192.168.1.1 in the address bar.
The network password window will appear. This is where you need to enter the network password. As always, the default password is admin.
Click the Wireless tab.
Select Manual.
For the 2.4 GHz network, the available Channel Width is 20 MHz.
Click the drop-down arrow for Channel.
You may now select your preferred channel. The recommended channels are 1 or 11.
Note: on some models, you just need to click on Wireless > Basic Wireless Settings, find the Wireless Channel then make your changes through the drop-down menu.
The cause of your issue could be wireless interference from other networks. Try to change your router’s channel to one of the two non-overlapping channels mentioned above.
4. Reset the router to its factory default settings
Locate the Reset button on the back of your router.
With the router powered on, use the pointed end of a paperclip or another similar object to press and hold the Reset button for 10 seconds.
Make sure that the Power LED of the router is blinking when you do that.
Then, unplug and re-plug the router’s power adapter.
Wait for the router to fully reset and power back on.
The Power LED of your router will keep on blinking for a few seconds after resetting it. If the Power light isn’t solid after 60 seconds, power cycle the router again.
If the previous steps made no difference, you may perform a router reset to restore factory defaults. This will wipe out all of your customized settings. Router username and password will also be reset to factory default values.
So, you’ll have to reconfigure your router and update your Wi-Fi devices to use the same customized Wi-Fi settings. Your Wi-Fi network will become accessible only after performing these actions.
5. Unblock the Wi-Fi access
If the Xbox is not even able to get an IP address from the router, that’s a sign that you are not connecting to the local network. One frequent scenario is discovering that your antivirus is blocking the Internet, so start troubleshooting this from here.
Checking that you have the proper ports forwarded to the IP address of the Xbox or trying to manually set up static IPs on both ends could also help. Moreover, take into consideration that one of your 3rd party accessories could be behind this issue.
If you’re aware of another potential solution, share it in the comments area below with the rest of our readers.
Windows Server is widely used by many users across the world as it ensures safe and fast networking and sharing of services, data, and applications among multiple users. Its well-equipped interface is the reason for its widespread usage. If your version of Windows Server asks for activation, this is what you need to do to properly and permanently activate it.
How To Activate Windows Server
1. Activating Windows Server with KMS Client Key
To activate your Windows Server easily, you can manually install KMS Client Key for your version of Windows Server.
First, you need to look for the KMS Client Key that is available on Microsoft’s website for your version of Windows Server. Go to Microsoft’s website to find the specific KMS key for the version you wish to activate.
After finding out the appropriate key for your WS, write it somewhere in Notepad.
Open Command Prompt (Admin) by Right-Clicking on the Windows Icon located in the left corner of the taskbar.
Command Prompt will show you a black screen; type slmgr /ipk Client Key in the command windo. Hit Enter.
Type slmgr /skms kms8.ms.com in the window and press Enter.
In the end, type /ato in the window and press Enter.
2. Resetting The Activation Timer
Even though KMS Client Keys are available for almost all the latest versions of Windows Server, there are some exceptions. If you don’t find KMS Client Key for your version of Windows Server, you should not worry about it. Resetting the activation timer is another way to fix the activation issue. Follow these steps to reset your Windows activation timer and start using Windows Server as if you have just installed it.
Firstly, launch Command Prompt (Admin) by Right-Clicking on the Windows Icon located in the left corner of the taskbar.
In the command window, type vbs –rearm.
Check whether you have spelled the command correctly or not.
Press Enter.
You will be asked to perform a restart; do it right away.
MAK or Multiple Activation Key is another method to activate your Windows Server. You can also use the MAK key and activate your WS. Follow these steps to learn how to get MAK key and its usage.
AirPods are one of the best headphones on the market, but many users reported that AirPods aren’t connecting to their MacBook. This can be a big problem for some, but in today’s article, we’ll show you how to fix that.
What to do if AirPods won’t connect to MacBook
1. Make sure that your Mac OS is up to date
If AirPods won’t connect to MacBook, you need to make sure that your OS meets the AirPods requirements. These are the requirements:
For 1st generation of AirPods, you need to have macOS Sierra or later installed.
For 2nd generation or AirPods, you need to have macOS 10.14.4 or newer.
2. Remove AirPods from the list of devices
One way to fix this problem is to remove AirPods from the list of devices and then add them again. You can do that by following these steps:
Open the Apple menu and go to System Preferences > Bluetooth.
Select AirPods from the list of devices and click X right next to it.
Put your AirPods in the charging case.
Move the charging case close to your MacBook and open the case lid.
From the device list, choose AirPods and click on Connect.
3. Forget AirPods as a Bluetooth device
If AirPods are not connecting to MacBook, try using the Forget Device option like this:
Go to System Preferences > Bluetooth.
Select your AirPods and click on X.
Now click on Forget Device.
Wait for a few minutes and try to connect your AirPods again.
4. Make sure AirPods are set as the output device
If AirPods aren’t selected as the output device, then you might encounter this issue. To fix it, do the following:
Turn on Bluetooth on your MacBook.
Place your AirPods in range and open the case.
Go to System Preferences > Sounds > Output.
Now select your AirPods.
5. Reset the AirPods
If nothing else works, try resetting your AirPods:
Press and hold the setup button on your charging case.
Release the setup button when the status light flashes amber a few times and then flashes white.
Connect the AirPods to your MacBook.
There you go, several solutions that should help you if AirPods aren’t connecting to your MacBook.
If the Power or Diag LED on your router is blinking, you know for sure the firmware is malfunctioning. When this happens, you can’t assign IP Addresses to any computers connected to your router or access the router’s web-based setup page.
With the increase in the number of people stating that their Linksys routers will not stop blinking, we wanted to discuss how to address the issue.
Are you wondering how the Blinking Power on your router can be stopped? To find out how to do that, check the fixes below.
What can I do if the Linksys router doesn’t stop blinking?
1. Try a quick reboot
Shut down all your networking devices.
Unplug the power cord of your router from the power outlet.
Allow it to sit for 30 seconds unplugged.
Plug back in and turn on the router.
Wait for it to completely boot up.
Note: You may also unplug the power cord, Internet, and Ethernet cables from their ports. Then, plug them back.
Make sure you first try to reboot your router. This procedure allows it to re-establish a connection to your ISP, therefore potentially putting an end to the blinking.
2. Update the Linksys router firmware
You will have to update its firmware if the lights continue to blink. Make sure that you download the correct firmware for the specific router you own to prevent further technical problems.
Right-click the Local Area Connection icon, and choose Properties.
Select Internet Protocol Version 4 (TCP/IPv4) on the Local Area Connection Properties window.
Up next, click Properties.
Click the radio button beside Use the following IP address.
You may now enter the IP address, Subnet Mask, and Default gateway in the fields provided.
The default values for the IP address and Subnet Mask are 192.168.1.1 and 255.255.255.0 respectively.
Select Use the following DNS server Addresses.
Enter a Preferred DNS server. This is obtained from your internet service provider.
Click OK.
Finally, click Close.
Note: Steps here detailed are for Windows 10 computers.
Your router can no longer assign IP Addresses to the computer connected to it, so you need to manually assign the static IP Address. After doing that, check the computer’s connectivity to the router by conducting a ping test
Press the Windows key on your keyboard to access the Start screen. Type cmd in the search field, then select Command Prompt once getting the search result.
4. Reset your Linksys router
With something small and pointed, like a paperclip, press and hold the Reset button of your router for 30 seconds.
Unplug the power cord of the router for 10 seconds.
Plug it back in and wait 30 seconds for the router to fully reset.
Rebooting your router means you cycle the power to it. Power cycles do not erase your saved passwords, security keys, or other settings.
However, resetting your router involves changing it back to its default settings. When troubleshooting a Linksys router refusing to stop blinking, this can help.
Every router device goes dysfunctional at times and so are the Linksys routers. In fact, many reported that Linksys router won’t connect to modem.
This can be a major problem since you won’t be able to connect to the Internet at all, so it’s important to tackle this issue as soon as possible.
Fixing this problem is somewhat simple, and today we’re going to show you the best ways to do it.
Why is my modem not connecting to WiFi?
Issues with the modem or router can cause this problem.
Router’s default IP isn’t correctly set.
You don’t meet the ISP MTU requirements.
What can I do if Linksys router is not connecting to modem?
Linksys not working with Spectrum modem
1. Reboot the modem, then the router
Rebooting your router means cycling the power to it.
You should first try to unplug the power connector from the back of the router and plug it back in.
Rebooting the modem, then the router, and finally the PC restores connectivity most of the time.
2. Clone the Mac address of your computer
Open any web browser.
Enter the default 192.168.1.1 in the address bar, then press Enter.
Enter your login details. The default username is admin and the password is blank.
Click OK.
In the Setup tab, click the sub-heading called MAC Address Clone.
Click the Enable option.
Next, click the Clone Your PC’s MAC button.
Click Save Settings.
Clone the MAC address of your laptop to the route. This should work, and you ought to be all set and ready to surf the Internet.
You could also power off the Spectrum modem, unplug the coax, and wait a few minutes so that the modem loses the associated MAC address. Then, plug it back in and see if the connection works.
Linksys router does not connect to Arris modem
1. Power cycle your router and the modem
Unplug both the modem and the router.
Wait for 30 seconds. This allows the short-term memory of the devices to clear completely.
Plug the Arris modem back in first.
Wait a few more seconds for the modem to connect before turning on the router.
There is a difference between resetting a router and rebooting a router. The first fix you should try is to reboot (power cycle) it. This procedure will hardly take a few minutes of your time, so power cycle both your router and the modem.
2. Change the router’s default IP
Access your Linksys cloud account.
Click Connectivity.
Then, click the Local Network tab.
Click Edit next to Router Details.
Enter the IP address you want for your router.
The IP address you may use for the Linksys router can be: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255
Most Arris modems use the default setting for their IP and that will conflict with your router’s DHCP. Try changing your router IP, then reconnect.
3. Reset the router
Reset your Linksys router.
Then connect your modem to the router.
From the router, connect a cable to your computer.
If this doesn’t work, do the following:
Type cmd on your RUN menu (Windows).
A black screen window will come up next.
Type the following: ipconfig/release ipconfig/renew
First of all, ensure the port on your computer is enabled.
If you turn on Wi-Fi, it disables the Ethernet port.
Turn off the modem and do a factory reset on the router by taking a sharp object and pressing down on the Reset button for about 30 seconds.
After that, unplug and re-plug the router’s power adapter.
While it’s booting, plug in a straight cable from the PC to a LAN port on the router. Also, plug in a cat5e or cat6 from the router’s WAN port to the modem.
Wait until the router finishes booting. If it doesn’t open a browser, then open one by yourself and enter 192.168.1.1 in the address bar. That should get you to log in and solve the issue.
Remember, a reset like this one erases all settings you have ever changed in the past.
If this doesn’t work, we would recommend calling your cable ISP and telling them to send a tech who is able to set up the Internet through the router.
To learn more, we suggest reading our guide on how to configure Linksys router since it might come in handy when dealing with this issue.
If you have any other questions or suggestions, leave them in the comments section below and we’ll be sure to check them out.
Internet Explorer usually keeps a page history for a certain time period. However, some Internet Explorer users have posted on the Microsoft support forum about IE not keeping a page history. One user stated:
After having to do a thorough cleaning to get rid of malware, the History pane only shows the search in history option, and no history.
Thus, IE’s History tab doesn’t include any pages for those users.
What can I do if Internet Explorer doesn’t keep history?
1. Check the Delete browsing history on exit option
First, check if the Delete browsing history on exit option is selected. Click the Tools gear button at the top right of Internet Explorer’s window.
Click Internet options to open the window in the snapshot directly below.
If the Delete browsing history on exit option is selected, that’s probably why your IE browser doesn’t display a page history. Deselect the Delete browsing history on exit option.
If you’re also curious about how to change Edge’s internet options, check out this dedicated guide.
2. Increase the number of days Explorer keeps page history for
Your Internet Explorer browser might be configured to keep pages in history for zero days. To check if that’s the case, open the Internet Options window as outlined above.
Click the Settings button on the General tab to open the Website Data Settings window.
Click the History tab shown directly below.
Enter a higher value in the Days to keep pages in history box.
Click the OK button.
3. Increase disk storage space allocated to page history
In addition, check how much storage space is allocated to IE’s page history. To do so, select the Temporary Internet Files tab on the Website Data Settings window. There should be at least 50 megabytes allocated to page history. Increase the value in the Disk space to use box to 250 MB if it’s not already.
Resetting Internet Explorer will restore the browser to its default configuration, which might fix IE‘s page history. Open the Internet Options window again by clicking Tools > Internet options in IE.
Select the Advanced tab shown directly below.
Click the Reset button.
A Reset Internet Explorer settings dialog box window will open. Don’t select the Delete personal settings option there as that will erase your page history.
Click Reset on that dialog box to confirm.
Restart Windows after resetting Internet Explorer.
5. Reset the system attributes for IE’s page history folder
Users have also confirmed they’ve fixed blank IE page history panes by resetting the system attributes for the browser’s history folder. To do so, press the Windows key + Shotkey.
Right-click Command Prompt and select Run as administrator.
Enter the following into the window: attrib +h +s +r %localappdata%MicrosoftWindowsHistory. Press the Return key after entering that command.
If you’re having trouble accessing Command Prompt as an admin, then you better take a closer look atthis guide.
There’s a good chance the above resolutions will fix Internet Explorer’s empty History pane. Then IE’s History pane will show you pages that you’ve opened within the browser in recent weeks once again.
Don’t forget to leave any other questions or suggestions that you may have in the comments section below.
Disappointed that your Linksys router is not broadcastingWiFi, especially when so many dual-band routers support both 2.4 GHz and 5 GHz networks? Fortunately, we’ve got the right solutions for you.
This can be a big problem since you won’t be able to access Wi-Fi at all, or you won’t be able to use the high-speed connection.
However, there are a few fixes that you can try, so let’s see how we can fix this issue.
Why is my router not broadcasting a wireless signal?
Your PC or Wi-Fi router isn’t supporting 5GHz wireless.
Temporary glitches with the router can cause this problem to occur.
Outdated firmware can cause issues such as these in some rare cases.
Your router software might not support the latest features.
What can I do if the Linksys router is not broadcasting WiFi?
Before we start, make sure to check the following:
Ensure that your PC can work with 2.4GHz or 5GHz. If it doesn’t you might need to purchase a Wi-Fi adapter.
1.2 Confirm your computer has 5 GHz network band capability
Press the Windows key on your keyboard to access the Start screen.
Type cmd until the search result appears under the Apps list.
Select Command Prompt to open the application.
On touch-enabled computers, you might also swipe from the right side of the screen to reveal the Charms bar with the system commands.
Enter netsh wlan show drivers
Now, look for the Radio types supported section. If it says that the network adapter supports 802.11a or 802.11n network modes, this means that your computer has 5 GHz network capability indeed.
Login to the router stock firmware and click Connectivity.
Select Manual.
Then, choose the img file you downloaded and click Start.
The router will finally reboot. You can already set up your user/password and configure it.
If rebooting the router works temporarily, changing the software to DD-WRT corrects the issue. Flashing it voids the warranty, so proceed with caution.
Other Linksys router owners also claim the issue has been resolved after setting the bandwidth to 20mHz instead of Auto or manually re-entering the network information (SSID/password) on their phone.
We hope that our guide helped you fix the problem with your router. This isn’t the only issue you can encounter, and many reported that their Linksys router is not working.
In the comment section below, let us know which solutions worked best for you. Also, leave there any other questions or suggestions that you may have.
Office 365 is a line of subscription services offered by Microsoft as part of the Microsoft Office product line and can be considered as an alternative form of the MicrosoftOffice Suite.
Office 365 is constantly updated to bring users the best experience with all the services that it offers, but it goes without saying that some bugs do slip through the cracks along the way.
Such would be the case with an Office 365 issue that users have been reporting on the Microsoft forums:
When using IE11 to view my outlook 365 online, I receive the following error. “Office.com is not responding due to a long-running script.” User’s that are experiencing this issue have stated their email is running very slow.
Microsoft staff was soon to answer, and based upon their response we’ve made this guide that will tell you how you can fix the program.
What to do if Office 365 becomes unresponsive
1. Update your PC to the latest Windows 10 version
Select Start
Click on Settings (the gear-shaped icon in the Start Menu)
Click Updates & Security
Select the Windows Update tab in the sidebar
Select Check for Updates
If an update has already been downloaded, select Update now
Restart your PC
Additionally, you can also update your Windows 10 PC using a third-party Windows Update Manager.
2. Update your Internet browser
According to officialOffice support, Edge, Internet Explorer 11, Firefox and Chrome offer the best experience for Office 365 web services on Windows 10:
While some of these browsers automatically update when you open them, some need to be manually started. Check out each respective browser‘s documentation to see how to properly update them.
3. Clear your Internet browser’s cache and cookies
Office 365 may have problems running when the browser‘s cache is already full of data. As such, it is a good idea to perform a cache cleanup once in a while and see if that solves the issue.
Check out these links for official guides on how to clear your cache and browsing history on all of the supported browsers:
If you notice that you keep experiencing this sort of error, we advise you to switch to a browser with better loading and speed rates.
Opera is a modern browser that is frequently updated to provide the best possible user experience. The browser is light and easy to use, plus it is very customizable and it integrates a free VPN and adblocker.
Although the Minecraft Launcher is programmed to be self-updating, there are occasions when it fails and instead displays the following error message: An update to your launcher is available. In most cases, the game won’t even launch after this message appears on the screen.
Fortunately, there are a few fixes that can help you to fix this problem. We will take you through them so that you may quickly fix this problem and resume playing.
What to do if Minecraft Launcher needs updating
1. Restart Minecraft
In most cases, restarting the game helps solve this issue. You simply close the game and you launch it again. Minecraft will attempt to connect to the server and download the required launcher updates before fully launching.
If all goes well, the game should successfully load and since you will be effectively running a new launcher.
This is typically the solution for users running an older Java-based launcher.
2. Force update Minecraft
If your launcher won’t yet open, try to force-update Minecraft.
Start your Minecraft Launcher.
Click on Options right next to the Username
Select the box next to Force update under the Launch Options
Click Done then login with your usual Minecraft credentials. Minecraft should soon start updating itself.
During the process, Minecraft fetches the newest launcher updates online to help overcome the bug.
If restarting the launcher and forcing the update doesn’t get rid of the irritating warning, try to download the Minecraft Launcher afresh.
Steps:
Hold the Windows and X keys simultaneously.
On the menu that pops up, click on Programs and Features.
Locate the Minecraft Launcher from the Programs and Apps list then click on it.
Next, click Uninstall. This initiates the uninstallation and it should be done in a short while.
Let’s now look at how you reinstall the Minecraft Launcher.
Head over to the official Minecraft website and Click Download. Note that you might be asked to log in using your Mojang account to access the Minecraft Launcher file.
Open the msi file from the taskbar to run the installer. From there, just follow the easy instructions as displayed by the installer.
Once completed, close Minecraft then launch the game again. Your launcher should now work.
The latest launcher often comes with a number of new and very useful features and you’re enjoy Minecraft even more after this.
4. Update your Java to the latest edition
If you’re still receiving this error, it could be that your current Java installation is causing the launcher troubles. Subsequently, to play the game, you need to download the latest Java version.
Just follow these steps to download Java on your Windows computer (The steps are similar even for Java 11 etc.) then retry.
Many MacBook users reported that the HDMI connection is not working for them. This can be an issue, especially if you want to connect your MacBook to an external display. However, there’s a way to fix that.
What to do if HDMI connect isn’t working on MacBook?
1. Check if everything is connected properly
If your HDMI connection isn’t working, make sure that your MacBook is properly connected to an HDMI device. In addition, you can try the following:
Turn off the HDMI device while keeping the MacBook connected.
Disconnect the HDMI cable from your MacBook.
Wait for few seconds and connect the HDMI cable back to your MacBook.
Now turn the HDMI device back on.
This is a simple workaround, but it might come in handy, so be sure to try it out.
2. Check the HDMI cable
If HDMI never worked on your MacBook, it’s possible that there’s an issue with your HDMI cable. Apple products work best with Apple Certified cables, and if your cable isn’t certified, you might have to replace it.
Alternatively, you can consider purchasing an Apple HDMI cable.
3. Use Detect Displays option
If HDMI connection won’t work, try using Detect Displays option like this:
Open the Apple menu and choose System Preferences.
Select Displays.
Now hold the Alt (Option) key and click on Detect Displays
Check if the issue is resolved.
4. Restart your MacBook
Sometimes there might a glitch on your system that prevents the MacBook from working properly. The simplest way to fix that is to restart your MacBook and check if that helps.
5. Relabel or factory reset your TV
This issue appears usually with Samsung TVs, but you can fix it sometimes simply by relabeling the input that is used by your PC.
Alternatively, you can try resetting your TV to the factory settings.
There you go, several quick and simple solutions that can help you if HDMI isn’t working on your MacBook.
In case the HDMI connection is not working on your MacBook, you can fix it simply by checking your cables or by using the Detect Displays option.
It looks like you are having a problem with your Linksys router. It is not turning on at all. You had it for a long time, and it used to work like a charm.
That’s why you’re inclined to think it died without warning, and there’s no chance to change that. We wouldn’t go that far into calling it defective, at least not yet.
Here is a short list of things you can try to fix this problem.
What can I do if my Linksys router is not powering on?
1. Basic troubleshooting procedures
Let’s first apply some basic troubleshooting steps for your problem:
Resort to the good old power cycle trick. Unplug your router from the power. Let it sit for 30 seconds, then plug it back in. You may unplug all the Ethernet cables and the power cord from their ports and plug them back in. Connect the power cord to the power outlet.
Ensure that your modem is connected from the Internet port of the Linksys router.
Test the power supply to verify it’s putting out the proper voltage.
Try different outlets and power strips.
2. Try the 30/30/30 reset
Assuming you tried all previous steps to no avail, this procedure will clear out the NVRAM memory modules and set your Linksys router back to default values.
Start by pressing and holding the Reset button from the back of the unit for 30 seconds. Unplug the power cable from the router while still keeping Reset pressed for another 30 seconds.
Plug the unit back in, holding the button for 30 seconds. We hope you’re not one of those who lack the patience to wait the full 30 seconds time.
Even if the Reset button can be relatively easily clicked, it usually doesn’t do anything unless pressed for the correct amount of time.
An old firmware can be why your Linksys router is not powering on any longer too. So, you should keep the firmware up to date.
Take a peek and see if you have the latest firmware. If not, correct that right away and update your Linksys router firmware. You can never know; it might just be your lucky day.
In case the router doesn’t work after applying the previously mentioned steps (not even with a wired connection), chances are internal hardware damage is involved.
If any damage is visible on the plastic casing of your router, you need to replace it. However, if there’s any damaged component on the motherboard, you must also replace the functional component.
The worst-case scenario here is that the motherboard itself has been damaged. The bottom line, the router will most likely need to be replaced.
If you have any other questions or suggestions, don’t hesitate to leave them in the comments below.
