Is your VMware replication status not active? Try this

Posted on by Vladimir Popescu

If you see the VMware replication status appearing as being not active, even though the VM is configured for replication, you came to the right place.

Having the status of the replication remains inactive, even if the replication process completes successfully can be extremely frustrating for some users.

To add to this initial frustration, even the vSphere Replication Management Server (VRMS) states that the VM is inactive.

This issue can occur in VR environments that use a Network Address Translation (NAT) between the two replication locations, or if a firewall is blocking the network ports required to perform a full replication.

In this fix article, we will explore the best solutions to fix this method once and for all, and change the VMware replication status to its true value.

Here’s how to change replication not being active on VMware

1. Make sure firewall is not blocking the required VR ports

laptop with user and phone - VMware replication not activeYou will need to check your firewall settings to make sure that the 31031 and 44046 ports are not being blocked.

These ports allow your VMware application to connect the two replication locations.

Depending on the firewall service your computer is using, the steps will vary.

If you’re using the Windows Firewall, follow these steps to unblock the ports mentioned above:

  1. Press the Win+X keys on your keyboard -> click Control Panel.
  2. Select System and Security -> Windows Firewall.
  3. Choose the option Advanced Settings and select Inbound Rules from the left-side panel.
  4. Right-click the Inbound Rules -> choose New Rule.
  5. Add the port 31031 -> click Next.
  6. Choose the protocol type (TCP or UDP) -> press Next.
  7. Choose your network type -> Next.
  8. Add a name to the newly created rule and click Finish.
  9. Repeat steps 1-8 of this method and add the port 44046 to the same list.

Want to clone virtual machines in VMware? Here’s how

2. Use an IPsec tunnel between the two replication sites

laptop close-up black - VMware replication not activeIf you’re using a NAT in your VR environment, then you need to exclude all VR components from the NAT.

The best method of communication between all your VR components is either by using an internal or external address.

To create an IPSEC tunnel between the two replication sites, follow these steps:

  1. Open vCloud Air -> click the Gateways tab.
  2. Select the gateway you want to set up an IPsec VPN connection.
  3. Click the option Manage Advanced Gateway Settings.
  4. Choose the gateway name -> right-click -> choose Edge Gateway Services inside the VPN tab.
  5. Check Enable VPN.
  6. Click Add -> complete the entire list of needed information.
  7. Click Ok.

Note: The IPsec VPN connection needs to be created from both of the sites you want to replicate.

Conclusion

In today’s guide, we discussed the best method to try if VMware replication status is not active despite having the right settings.

Please let us know if this guide was helpful by using the comment section below.

READ ALSO:

Paint 3D Guide: How to save and remove stickers

Posted on by Vladimir Popescu

If you’re wondering how to save and remove stickers in your project, your search is now over.

Besides all the common features like drawing in 2D and 3D, readjusting the model, and coloring every part of it to your desire, you can also use Paint 3D to add great-looking stickers.

These colorful stamps can improve your projects with different great looking stickers, that can be added to both 2D and 3D projects. Beyond this, you can also add different textures to your artwork, with just a few clicks.

In this article, we will discuss every aspect of your usage of stickers inside Paint 3D, and we’ll do it efficiently and fast.

Read on to find out more details about this subject.

Here’s how to save a sticker inside Paint 3D

  1. Press the Start button in your taskbar -> scroll the list of programs to find Paint 3D -> click on it to open it.Paint 3D - app inside Cortana search
  2.  Inside Paint 3D -> press the Sticker button found in the menu at the top of your screen.
  3. This will open a Stickers menu on the right side of your screen that contains three tabs – Stickers, Textures, and the Browse button.
  4. Select the Stickers tab -> choose one of the stickers available (or choose the browse tab to upload your own sticker).
  5. After selecting a sticker, click and drag your mouse on the canvas to set it.
  6. Press the checkmark button to the right side to apply it to your canvas.
  7. Press the Menu button from the left corner of your screen -> select Save -> choose the desired location of your file.

Want to curve text in Paint 3D? Here’s how

How to save a sticker in PNG format?

  1. Open your art project inside Paint 3D.
  2. Follow steps 1 to 6 from the first method.
  3. Click the Canvas button from the menu at the top.Canvas option Paint 3D - How to save a sticker Paint 3D
  4. Resize the canvas size -> toggle the button Transparent Canvas.
  5. Click the Menu icon -> select Save as -> click on the Image option.
  6. Browse to the location you want your files to be saved in.
  7. Click the drop-down menu next to Save as type -> choose the option 2D .png.

How to remove stickers in Paint 3D?

laptop on desk black - How to save a sticker Paint 3D
Inside the app:

  1. Click and drag your mouse around the sticker you want to delete to select it.
  2. Press the Delete key on your keyboard to delete the specific sticker.

To remove stickers you saved in Paint 3D:

In order to remove the stickers that you previously created, you will need to follow these steps:

  1. Press the Win+R keys on your keyboard -> copy-paste this link: %localappdata%PackagesMicrosoft.MSPaint_8wekyb3d8bbweLocalState
  2. To run the command, press Enter.
  3. This will open the folder in which your created stickers will be stored.
  4. To delete any of them, right-click it -> select Delete (or select it and press Shift+Delete to remove it permanently).

In today’s Paint 3D guide we explored the best method to save and remove stickers in the software.

We also explained how to find and remove saved stickers from your hard-drive.

Please feel free to let us know if this was helpful in your case. You can do that by simply using the comment section below.

[wl_navigator]

Minecraft Earth begins global release this month, Realms Plus with premium content for $7.99 per month

Posted on by Radu Tyrsina

Minecraft Earth is set to be released starting next month, as announced during the Minecon event earlier today. The game has been in limited closed beta testing for select players on iOS, and more recently Android, for some time now.

The game saw some demo time during Minecon Live with the Minecraft Earth game director Torfi Olafsson and two of the other show hosts showing it in action live. The developers working on the project have not only brought crafting to the table (pun intended) since the game was announced, but also “Adventures”—allowing players to interact with mini games such as the one demoed during the event.

The announcement of the game’s release during the Minecon Live event was very vague on the details, but it’s easy to imagine it rolling out in the game’s main markets, including the U.S., Mexico, U.K., Japan, and of course Mojang’s home Sweden. The game is also expecting to see its first feature update in the spring of 2020.

Minecraft Realms is getting a major upgrade

Another perhaps really exciting announcement during this year’s annual Minecraft event is the new Realms Plus subscription. It will cost the same as the current 10-player-maximum subscription of $7.99, but will “add more than fifty pieces of content” including skins, textures, and worlds according to Fedrick Telenius, the program manager for Realms.

Mojang will be offering a free trial to those who haven’t subscribed to Realms before. Additionally, current members of the 10-player subscription will be upgraded automatically upgraded free of charge.

Which are you most excited about—Minecraft Earth or Realms Plus? Be sure to share your thoughts in the comments area below.

Binary translation incompatible with long mode in VMware [FIX]

Posted on by Milan Stanojevic

When it comes to creating virtual machines, VMware is one of the greatest tools on the market. VMware helps you get many different virtual computers on the same physical device.

However, many users encountered the “Binary translation is incompatible with long mode on this platform. Disabling long mode” error message when trying to open a virtual image in the VMware workstation.

This issue appeared even though the users ran VMware’s utility “Processor Check for 64-Bit Compatibility” with success. The operation was followed by this message: “This host is capable of running a 64-bit guest operating system under this VMware product”.

Therefore, everything seemed ok at this point. So, what was the issue here? We will answer this and fortunately, there is a solution available and today we will show you what to do if you encounter this error.

Virtual machine not able to run 64-bit code? Here’s the fix

Enable Intel Virtualization Technology

Luckily, the error “Binary translation is incompatible with long mode on this platform. Disabling long mode” has a very simple solution.

Users found out that Intel Virtualization Technology (VT) is “disabled” by default in BIOS on some devices, such as Lenovo ThinkPad W520 that runs on Windows 7 64-bit.

So, follow the steps below to fix the problem.

  1. Shutdown your device and start it again. Once the splash screen appears, press the F1 key to enter the BIOS.
  2. In BIOS, choose the Security option/tab. Under that, choose the Virtualization option.
  3. This will appear: Intel (R) Virtualization Technology [Disabled]
  4. Change that to Enabled.
  5. Save and Exit the BIOS.
  6. Open the VMware virtual machine, and then click on Power > Power On. You no longer should get the popup message.

Conclusion

So, the solution is pretty simple. However, many users complained that VMware doesn’t offer enough information in the pop-up message regarding the problem.

Still, users might receive different error messages, depending on the version of VMware workstation. Some users said they received more detailed information regarding the error.

error vmware

As you can see, the message above offers some solutions to fix the error.

Did our solution work for you? Did you find another method to fix the issue? Do let us know in the comments section below!

RELATED ARTICLES YOU NEED TO CHECK OUT:

[Updated] Microsoft gets ready to test Console streaming from Xbox One to mobile devices

Posted on by Radu Tyrsina

As Microsoft is now gearing up to kick off its Project xCloud public trial next month, the console streaming feature that the company announced back at E3 2019 should soon be available for some Xbox Insiders. If you’re in the US or UK, the network test for console streaming is now live in the latest Xbox One preview builds for Preview Alpha and Skip Ahead Insiders.

“Console Streaming is our new Xbox One platform feature that lets you stream installed Xbox One games (including Xbox Game Pass titles) to your phone or tablet directly from the Xbox One you already own. Those with consoles in Alpha and Alpha Skip Ahead Ring in the US and UK can now test their home network, controller and console settings to get ready for the preview,” explained Xbox Insider Team Lead Brad Rossetti.

To use this feature, though, you’ll need to make sure that your home Internet connection passes the test, and ideally that means meeting the following criteria:

  • A wired connection
  • An Open NAT type
  • An upload speed of 9 Mbps or faster,
  • A latency of less than 60 ms

Your console will also be set to Instant-on to allow your phone or tablet to access it remotely, and you’ll also need to have an Xbox Wireless Controller with Bluetooth with the latest firmware installed. Once you’ve installed the latest 1911 or 2004 preview builds for Xbox One, the Xbox Console Streaming (Preview) readiness test will be available in Settings -> Network settings -> Test console streaming.

“We’re looking forward to sharing more about Console Streaming (Preview) and what to expect in the coming weeks,” Rossetti said. It’s still not clear when the feature will be available for Xbox Insiders and the general public, but its availability in the latest 1911 preview build suggests that it could be November at the earliest.

Update 9:20AM EST: We initially wrote that console streaming was live for select Xbox Insiders, while it’s just the network test for it that is now available. We’ve updated the post to reflect that, and we apologize for the error.

The Samsung Galaxy Note 10’s “exclusive” Link to Windows capability is coming to the Galaxy S10 too

Posted on by Radu Tyrsina

When Samsung announced its new Galaxy Note 10, it shipped the phone with a special and exclusive “Link to Windows” functionality. Users were able to accomplish the same tasks as with the “Your Phone” app but without the need for Bluetooth or a separate download. There were hints that the experience might come to other Galaxy Phones, but recently, Microsoft program manager Vishnu Nath confirmed these rumors.

The “Link to Windows” functionality will be coming as part of a software update to the Galaxy S10e, S10, S10+, and S10 5G. Unfortunately, it’s not clear when the update will come to the United States, but Samsung notes that it has already been released in select European markets on September 23.

Naturally, there’s curiosity if the “Link to Windows” feature can also come to older Galaxy Phones, including the Note 9, or Galaxy S8, but Vishnu Nath confirms that there’s nothing to announce as of yet. He instead assured users that Microsoft is working to bring the feature to more devices soon. It would also appear as though that there are some limits on the technology, as Nath said in the below tweet.

In addition to the “Link to Windows” functionality, this software update also brings the Samsung DeX for PC experience on the Galaxy S10. Users will be able to launch Samsung DeX on their PC or Mac simply by connecting their Galaxy S10 to their computer via USB cable.

Microsoft news recap: US Department of Interior moves employees back to Office 365, ElectionGuard goes open source, and more

Posted on by Radu Tyrsina

Microsoft news recap is a weekly feature highlighting the top Microsoft news stories of the past week. Sit back, grab some coffee, and enjoy the read!

US Department of Interior moves 84K employees from Google apps back to Office 365

84,000 employees at the US Department of Interior have been moved away from Google’s business suite of apps back to Microsoft’s Office 365.

Microsoft makes its ElectionGuard software for voting systems open source

To help more election campaigns secure their communications, Microsoft has open-sourced its ElectionGuard software that can be used with voting systems.

Microsoft is fighting to “curb the overuse” of government requests for enterprise data stored in the cloud

Microsoft has published a blog post talking about how it is trying to “curb the overuse” of government requests to access its enterprise customers’ data stored in the cloud, such as in OneDrive or Azure. It believes it has a right to inform its customers when such a request is made.

Microsoft, Surface, Windows, Xbox, Microsoft Store

LinkedIn announces new Recruiter mobile app and more Talent Solutions updates

LinkedIn is revamping its Recruiter app for iOS and Android. It is rebuilding the app from the ground up, with an improved search and messaging experience. The update will be available later this year.

LinkedIn announces new Recruiter mobile app and more Talent Solutions updates

That’s it for this week. We will be back next week with more Microsoft news.

Nikon Camera Flash Not Working? Try These Solutions

Posted on by Tashreef Shareef

Nikon cameras come with a strong flash to capture great pictures even in the dark. However, at some point in time, you may encounter issues with the camera’s flash. Several users have reported Nikon camera flash not working issue online.

According to the camera users, while the flash pops up, it does not fire. Flash problem in DSLR camera can be triggered by many reasons including dust issues and sensor problem.

If you are also troubled by this issue, here are a couple of troubleshooting tips to help you resolve Nikon camera flash not working in no time.

Troubleshoot Nikon camera flash not firing issue

1. Clean the dust

Nikon camera flash not working

Before troubleshooting the camera, make sure the mode you are using the camera in allows Flash to operate.

  1. Over time the camera flash can accumulate dust in the hole. This can affect the camera’s sensor resulting in issues with the flash.
  2. Try cleaning the flash compartment for dust. You can use a blower to blow out any dust and other objects that are causing issues with the flash.
  3. If you don’t have a blower, use a clean cloth try to clean as much as you can. Wrap the cloth to a screwdriver and clean the inside gently.
  4. Once done, make sure you have the flash on.
  5. Try to click a picture and check if the Nikon camera flash is working.

Nikon camera not charging? Try these fixes

2. Troubleshoot flash sensor

Nikon camera flash not working

  1. If the sensor is failing to realize when the flash head is up, it will not fire the flash. To check if that is the case, do the following.
  2. Set the camera in Auto mode.
  3. Now half-way depress the shutter making sure that flash would be required. This will trigger the flash head to pop up.
  4. Release the shutter.
  5. Again half-way depress the shutter and check if it makes a clicking sound
  6. If the camera sensor is malfunctioning, the camera will not fire the flash even if the flash head is up.

3. Fixing the camera sensor

Nikon camera flash not working

Note: This process requires you to remove the flash cap from the camera. If you are not sure what you are doing, consult an expert.

Note: Make sure you discharge the condenser to avoid any shock.

  1. Follow these steps after confirming the issue is with the sensor in step 2.
  2. First, remove the 2 screws from the front of the flash head pop-up.
  3. Remove the rear plastic cover.
  4. Inside you should see a small switch on the right side of the flash unit.
  5. Remove the spring-screw from the other side and remove then remove the bracket.
  6. Pull out the white sleeve on the right side. This sleeve moves in slightly.
  7. The wires are very thin, so put the flash bracket onto the camera gently.
  8. You will see the white plastic bearing with 2 small clips. It needs to be through the hole and on the bracket. It will put the pin which activates the switch in the right position.
  9. Now put back the flash head in the order you removed it.
  10. Fire the flash to check if the flash is working again.

RELATED STORIES YOU MAY LIKE:

Block All Internet Traffic Except One Program [How to]

Posted on by Teodor Nechita

Users have been asking on the official forums if there is a way to block all Internet traffic except one program.

While this is possible, keep in mind that Windows Firewall can prevent connection if you choose to do that. But if you’re determined to block all traffic, you can do it by following the instructions from this guide.

How can I block all Internet traffic except one program?

1. Manually block processes one-by-one

  1. Press Windows + R, and type in control.
  2. Select View by (Top-right corner) to Category.
  3. Click on System and Security.
  4. Under the Windows Defender Firewall, select Allow an app through Windows Firewall.
     
  5. Deselect both boxes corresponding to each process until you finish the list.

2. Make Windows Firewall  block all outgoing traffic by default

  1. Press Windows + R and type in control.exe, which will open the Control Panel.
  2. Select View by (Top-right corner) to Small icons.
  3. Click Administrative Tools.
  4. Select Windows Defender Firewall with Advanced Security.
  5. Click Windows Firewall Properties (on the right side).
  6. Click next to Outbound connections and select Block from the list.
  7. Confirm your changes by selecting OK.
  8. Delete the block all outgoing traffic rule.

This is a great way to block all Internet traffic except one program, so be sure to try it.

3. Use IPSec

  1. Click Windows, type in MMC and select it from the list.
  2. In the new window, click File.
  3. Click Add/Remove Snap-In.
  4. Select Add the IP Security Policy Snap-In.

  5. Click OK.
  6. Right-click on the middle section and click Create IP Security Policy.
  7. Follow the wizard using default values and whatever names you want.
  8. After the first wizard, a new window will appear, When it does, click Add.
  9. Click Next 3 times, and then click Add.
  10. Name it something relevant, like Block all, and click Add.
  11. Go through that wizard with just default values, and click OK at the end.
  12. Select Block All and click Next and then Add… again.
  13. Follow the wizard, and give it the name Block, then select it as an action.
  14. Repeat Steps 9-14 selecting the proper source, destination or protocol and selecting Permit in Step 14

How do I block Internet access except for one site?

  1. Search for Internet Options and open it.
  2. Go to the Connections tab and click on LAN Settings.
  3. Select use a proxy server. Set the Address to 127.0.0.1 and click on Advanced.
  4. Now in the exceptions field, enter the websites you want to allow.
Note icon NOTE
This is just a workaround and shouldn’t be used in professional settings.

As you can see, blocking all internet traffic except one program is somewhat simple, but that can negatively affect your PC. So, you may consider blocking Internet access for specific apps.

To learn more, we suggest reading our guide on how to block applications in Windows Firewall.

Did you find a different method to use? If so, share it with us in the comments below.

Power BI total doesn’t add up? Try these solutions

Posted on by Tashreef Shareef

Power Bi is a powerful data visualization BI tool from Microsoft. It offers companies the ability to present data in new ways with interactive data visualization. That said, sometime, in Power Bi total measures may not add up. Multiple users have reported “Power BI total doesn’t add up” issue.

Several users have reported similar issues in the Power BI community. According to the users, the totals don’t add up the table after applying filters.

Hi,
I have this measure -> GP = – 1800 + SUM(vw_PivotVisitsInvoiced[Income Generated])
Calc Column -> Income Generated = vw_PivotVisitsInvoiced[Visits_NoHrs] * 6.25
Why is my total below not right?

This error is usually caused due to the incorrect table relationship or calculation formula. If you are also troubled by this issue, here are a couple of troubleshooting tips to fix Power BI total doesn’t add up error.

How to fix Power BI table doesn’t show total

1. Check table measures

Power BI total doesn't add up

  1. If your issue is similar to what is in the quote above, then try using SUMX().
  2. Since your GP is a measure, at the grand total, first it will just sum all the data together and then subtract by a given number.
  3. By using SUMX(), you can evaluate the expression on each row. Check the example below:
    GP =SUMX(vw_PivotVisitsInvoiced,vw_PivotVisitsInvoiced[Income Generated]-1800)
  4. Use the SUMX() and check if it helps resolve the issue.

How to bypass Power BI sign-in issues quickly

2. Check your table relationship

Power BI total doesn't add up

  1. If you are trying to add the filter to the table and the total doesn’t add up, it can be related to your table relationship.
  2. One way to fix this is to change the cross filter direction between tblProjects and tblEvents from SIngle to Both.
  3. Once you have changed the cross filter, the result should be as expected, and the table should add up.

3. Other solutions to try

Power BI total doesn't add up

  1. One issue with Power BI problems is that the solution for each problem can be different depending on the problem and the expected result. However, the tablet doesn’t add up usually occurs if the formula you are using is incorrect.
  2. Go through the measures again and check if everything is right. If you are unable to find any issue, ask for help in the Power BI community.

The solution for Power BI total doesn’t add up can vary for each user. However, most of the time, the issue is due to incorrect measures. Follow the steps in this article and try to make changes to your measures accordingly.

If the issue persists, use the Power BI community link given above to get more help. The Power BI community can help you with your problem.

RELATED STORIES YOU MAY LIKE:

FIX: A deleted printer in Windows 10/11 keeps coming back

Posted on by Teodor Nechita

If your deleted printer keeps reappearing on your Windows system, especially when you’re trying to print something, you’re not the only one.

Several users have been complaining of official forums that their deleted printers keep coming back even when they try deleting it.

[…]The old printer was “deleted” from the “Devices & Printers” but every time the user logs in, the old printer returns like a ghost, its image greyed-out.[…]

One possible reason for this issue is deleting the printer while it was still in the process of printing a document.

How to permanently delete printers form your system?

This issue is most commonly found at workplaces, where several people use several printers.

1. Check out the Print Server Properties

  1. Press Windows + S
  2. Type in Printers
  3. Select Devices and Printers
  4. Click on the desired printer and select Print Server Properties
  5. Locate the Drivers tab, and choose the printer you want to delete
  6. Right-click and select Remove
  7. Choose Apply and OK to save the changes you just made
FIX: Deleted a printer in Windows 10 keeps coming back Delete printer server properties

Once this is finished, proceed with the following:

  1. Press Windows
  2. Click on the Settings button (the cogwheel-shaped button in the Start menu)
  3. Go to Apps & features
  4. Select the undesired printer
  5. Remove it from your system

You can also use this solution to fix other printer-related issues.

2. Check out your registry

  1. Press Windows + R
  2. Type in regedit
  3. Navigate to this address:
    • HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrintPrinters
  4. Click to expand the Printers tab
  5. Locate the printer you want to delete
  6. Restart your PC
Deleted a printer in Windows 10 keeps coming back Registry editor

Old registries giving you a hard time on Windows 10? Why not try cleaning them up a bit?

3. Use a Deleter tool

There are plenty of deleter tools out there, some of which are even free of charge. Make sure to create a system restore point before using one.

Alternatively, we recommend using an all-in-one program that deletes data from your hard drive and applies advanced technology to ensure it can never be retrieved

⇒ Get Secure Eraser

4. Log out all users from the PC

If your PC has multiple users logged in, then the chance of the printer is in use by one of them is increased.

Log out all users and then delete the printer and its driver package.

5. Delete it through the Device Manager

  1. Press Windows + X
  2. Select Device Manager from the list
  3. Expand the Show hidden devices tab
  4. If you see your printer there, right-click it and select Uninstall
Deleted a printer in Windows 10 keeps coming back Device manager show hidden device

6. Delete it through the Print Management

  1. Press Windows + S
  2. Select the Print management app
  3. Select Custom Filters
  4. Go to All printers
  5. Right-click the printer you want to remove, and select Delete
Deleted a printer in Windows 10 keeps coming back Print Management

We hope you found our article helpful, and if you did, feel free to leave a comment below.

RELATED STORIES YOU SHOULD CHECK OUT:

Xbox error code 13: Here’s how to fix it

Posted on by Teodor Nechita

Xbox is a video gaming brand created and owned by Microsoft which is represented by a series of video game consoles.

These are currently represented by three generations of consoles, with a fourth being on its way.

Each of them is far apart from each other both in terms of date of launch as well as specs.

Of course, there is always room for improvement, and players may sometimes feel the need for an unofficial upgrade for their console.

If you’ve ever tried modifying your Xbox or installing third-party programs on it, you’ll most likely have encountered an error code 13.

This is because the Xbox dashboard isn’t compatible with whatever updates you brought to it.

The bright side is that this issue is something you can fix at home, just many other common Xbox errors.

As such, you don’t have to worry about sending your console back to a Microsoft service shop.

What’s more curious is that you can do it by using video games.

How do you fix the Xbox dashboard error?

  • You first need to unplug your Xbox from the Internet by unplugging the ethernet cable.
  • Get a new Xbox game. This includes pretty much any game developed after the fall of 2004 as they all have the dashboard update.
  • Insert the game disc inside the Xbox, and close the disk drive so that it may load.
  • During the game‘s setup, it will also install the dashboard update automatically.
    • Please note that some games will require you to perform the dashboard update manually, so pay close attention during setup for any messages on the matter.
  • Launch the game, and choose the Xbox Live so that the game will update your dashboard.

This will get rid of the error code 13 issue for good.

Keep in mind that if this method doesn’t work, simply try it again with another Xbox game.

If this doesn’t work either, you may need to contact Xbox technical support.

It is unknown whether this error will still be an issue with the launch of the fourth console generation.

However, it boasts plenty of new features, so players will have something to look forward to.

RELATED STORIES YOU SHOULD CHECK OUT:

How to change the resolution in Paint 3D?

Posted on by Vladimir Popescu

If you’re wondering if you can change the resolution in Paint 3D and how to do it, you found the perfect article.

Resizing your images in Paint 3D is a very important feature to have. You can use this to reduce the size or increase the size.

The latter option is applicable when you want to reach a set resolution that can be accepted by print shops.

In this article, we will tell you exactly how to do this. Please follow the steps we presented here and let us know if you found this guide helpful.

Here’s how to change resolution in Paint 3D

laptop keyboard - How to change resolution Paint 3D
1. Inside Windows Explorer -> navigate to the location of the image you want to modify.
2. Right-click the image and select -> Open with.. -> Paint 3D (this will automatically set the canvas size to the size of your image).
3. This will open your image inside Paint 3D.
4. Click the Canvas button found in the taskbar in the upper part of your screen.
5. From the menu that appears on the right-side -> enable the options Lock aspect ratio, and Resize image with canvas. (the Lock aspect ratio box should be ticked only if you want to keep the proportions of your image as they were originally).
6. Modify the values either manually by dragging the squares from the corners of your image, or select a specific width and height by modifying the values in the respective boxes.

Note: You can also select if you want your image size to be calculated in Pixels or Percentages by clicking the drop-down menu inside the Resize canvas section.

Need to resize an image in Paint 3D? Here’s how to do it

Conclusion

These are the most efficient steps you need to take in order to change the resolution of your images inside Paint 3D, on Windows 10.

We would love to know if this guide managed to make you understand how the resizing process works inside Paint 3D.

READ ALSO:

How to open ports for EA Sports games

Posted on by Teodor Nechita

Electronic Arts is one of the biggest video-game publishers in the world.

Their subdivision, EA Sports, have brought gamers plenty of titles such s FIFA, NBA, and more.

All of these titles have online game modes, but these come with a fair bit of issues.

If you cannot play any of EA Sports‘ games online without lag, connection issues or without using voice chat you may need to open ports on your network.

However, before you try to do this, try restarting your console, router, and even your modem, as this can solve a lot of issues.

If that doesn’t help, you can try opening ports on your PC or console.

Why do you need to open ports to play these games?

Ports are endpoints between two connections, and a port number is assigned to each end, like an address, to direct the flow of internet traffic.

If you’re having trouble connecting to any of EA Sports‘ online games you may need to open some ports on your network connection.

This will ensure that direct and steady flow of traffic will be directed between your PC or console, and the game‘s servers.

How to set up or forward ports?

Forwarding ports is different for each router, therefore we strongly suggest that you check your router’s manual for detailed instructions.

1. For Xbox 360

As you already know, you need Xbox Live to play online.

Xbox Live from an Xbox 360 requires the following ports to be open:

  • Port 88 (UDP)
  • Ports 53 and 3074 (UDP and TCP)
  • Port 80 (TCP)

Additionally, if you can’t chat with someone using Video Kinect, you might need to open port 1863 (UDP and TCP).

2. For Xbox One

Xbox Live from an Xbox One requires the following ports to be open:

  • Port 80 (TCP)
  • Ports 53 and 3074 (UDP & TCP)
  • Port 88, 500, 3544, and 4500 (UDP)

Some users have also reported that their gameplay improved if they opened the following ports:

  • Port 16000 (UDP and TCP)  for matchmaking and party chat
  • Ports 1863 (UDP and TCP) for Kinect, Skype and video issues
  • Ports 3075 and 3076 for  a small host of games such as Call of Duty Ghosts

3. For PC

Opening up or forwarding a port on PC is more a matter of dealing with the router settings rather than the PC itself.

As such, the method differs based on router manufacturer.

Speaking of EA Games, we have a great guide that will help you get EA Play early access, so don’t hesitate to check it out.

Head over to your router manufacturer’s website and download the manual for your device for more information.

How to export to .stl and .obj in Paint 3D?

Posted on by Vladimir Popescu

If you want to export your 3D project created in Paint 3D to either an STL or OBJ file format, you came to the right place.

STL and OBJ files are file formats that are compatible with your 3D printer. Exporting to these formats allows you to create a real-life model for your Paint 3D project.

The app doesn’t allow you to export directly into these formats, but there are some techniques that will allow you to do so.

In this article, we will explore some of the best methods to apply in this case. Please read on to find out how to do it.

Want to export Paint 3D files to STL and OBJ? Here’s how

In order to export your Paint 3D project to a .stl or .obj formats that are compatible with 3D printers, you will need to download and install the 3D Builder app from Microsoft Store, and follow these steps:

To download 3D builder:

  1. Open Microsoft Store -> search for the 3D Builder app.3D Builder - How to export to STL and OBJ in Paint 3D
  2. Click on it and press the Get button to download the app.
  3. Wait for the process to complete.

Want to bring objects to front and back inside Paint 3D? Follow this guide

1. Save the 3D file as .3mf:

laptop side view - How to export to stl and obj in Paint 3D

  1. Create your 3D model inside Paint 3D and click the Menu button from the top-left corner of your screen.
  2. Click on Save -> select Save as.
  3. Select the 3D model.
  4. In the Save as type section -> click the drop-down menu -> choose the .3mf format.
  5. Choose the desired location to save the file on your hard drive -> click Save.

2. Save the 3D project as .stl (or .obj)

user pressing key - How to export to stl and obj in Paint 3D

  1. Navigate to the location of the file.
  2. Right-click the file you saved previously -> select Open with -> 3D Builder.
  3. Click the pop-up saying that there are invalid objects to repair them.
  4. Resize and adjust your model with the desired characteristics.
  5. Click Menu -> select Save as -> click the drop-down menu named Save as type -> choose .stl (or .obj).
  6. Choose the desired location -> click Save.
  7. Your project will now be saved in the desired file format.

Conclusion

In today’s how-to article we explored the fastest way of exporting your Paint 3D project in .stl or .obj formats.

This will allow you to use your 3D printer to create the physical object you created in Paint 3D.

Please feel free to let us know if this guide offered you a comprehensive way of solving this issue.

READ ALSO:

Fix: Windows Server Could not Find any Drives

Posted on by Vladimir Popescu

Several of our readers have reported that when they try to install Windows Server, the installation can not find any drives.

This stops you from finishing the installation process and causes people a lot of stress.

Even though the variables for this issue will make the solutions vary a lot as well, in this list, we compiled some of the best methods for you to try out, just like we did with the Windows Server Manager not opening issue.

How can I fix the Windows Server not finding drives issue?

1. Make sure your drive boot priority is set correctly in BIOS

  1. Restart your PC and press the required key to enter the BIOS.
  2. Navigate the BIOS menu and find the BIOS Boot Priority option or related option.
    boot priority Windows Server 2016 Could not Find any Drives
  3. Make sure the drive you’re trying to use to install Windows Server is set correctly.
  4. Save the settings and exit BIOS.
  5. This will restart your PC, and now the boot should be performed from the drive you selected.
  6. If this didn’t solve your issue, please try the next method.

Depending on the specific BIOS version your PC is using, the exact steps will vary.

2. Deactivate the secure boot option from BIOS

  1. Restart your PC and open BIOS by following the first steps of the first method.
  2. Find the option called Secure Boot and select it.
  3. Select the Disabled option.
    disabled
  4. Save the settings and exit BIOS.
  5. Your PC will automatically restart.
  6. Check to see if the issue persists. If it does, you can try out the next possible solution.

3. Reset your BIOS to default settings

3.1. Using BIOS:

  1. Restart your PC and boot into BIOS.
  2. Find the Setup Defaults option.
  3. Search for an option called Reset to Default (or a similar name).
  4. Select Yes when prompted to Load Optimal Defaults.
    yes
  5. The process of resetting your BIOS will start immediately.
  6. Save the changes and exit BIOS.

3.2. Removing the CMOS battery:

  1. Completely turn off your PC and unplug the power cord.
  2. If you’re using a laptop, it is recommended that you remove the battery as well.
  3. Touch a piece of metal that has no paint on it to discharge any static electricity.
  4. Open up your PC.
  5. Identify the location of the CMOS battery and remove it by pressing the clip.
  6. Wait for a few minutes, and then plug it back in.

In today’s article, we explored some of the best solutions for the problem caused by your Windows Server 2016 not finding your drives.

If you are also dealing with other issues like Windows Server not showing up in Network File Explorer, check our comprehensive guide to fix it.

Let us know if this guide was helpful by using the comment section below.

Fix: The Operation is not Allowed in the Current State on VMware Tools

Posted on by Vladimir Popescu

Our readers have encountered the error message The operation is not allowed in the current state while using VMware tools.

This issue seems to be caused by a variety of issues. Sometimes, the error is produced after users try to create a snapshot of their VMs.

In other cases, this error appears when users attempt to shut down the vCenter Server before it detects the ESXi host. Irrespective of the cause, the solution in this guide will help you fix the error quickly.

How can I fix the operation is not allowed in the current state in VMware tools?

1. Restart the management agents on the host machine

  1. Open and connect to the console of your ESXi host.
  2. Press the F2 key on your keyboard to open the customization menu.
  3. Log in with root access.
  4. By using the up and down arrows -> navigate to the Troubleshooting Options > Restart Management Agents.
    restart
  5. Press Enter.
  6. Press the F11 key to restart the service.
  7. After the service restarts -> press Enter.
  8. Press the Esc key to log out.

You must make sure that your Virtual machine startup/shutdown with the host feature disabled.

2. Restart the VMware Virtual Center service on vCenter Server

  1. Log in with administrator privileges on the server running vCenter Server.
  2. Click the Start button -> select Run.
  3. Type services.msc -> press Enter to run the command.
    services
  4. Inside the list of services -> right-click the service you want to restart.
  5. Click Restart and wait for the server to complete the process.

It is worth mentioning that when you restart the VMware VirtualCenter Server service, all the users connected to the infrastructure through the client will be disconnected.

Even though the operation is not allowed in the current state with VMware ESXi tools errors can be caused by a series of factors, we managed to boil down all the solutions to the two presented to you.

Please follow the steps we provided in this list carefully to avoid causing any other problems. Is VMware autostart not working on your PC? Check our detailed guide to fix it.

Another common issue that people face while using the ESXi host is No coredump target has been configured message; read this guide to learn more.

Let us know if this article helped you solve your issue. You can do so by using the comment section below.

FIX: VMware clipboard not working

Posted on by Vladimir Popescu

A set of users have stormed the different online forums saying that for some reason their VMware is not able to copy-paste, or that the clipboard is not working.

This issue, even though it might seem trivial, can impact the way you use your VM inside VMware dramatically. Not being able to copy-paste the information to your VM, or from your VM, can mean that you have to spend crazy amounts of time manually copying the information.

This implies a lot of wasted time, and it is not recommended, no matter for which reason you’re using VMware.

In today’s article, we will explore some of the best-proven methods to deal with this issue. Please be aware that the methods in this list will be ordered from the least to the most invasive.

Read on to find out more details, and don’t forget to check if the issue is solved after each of the possible solutions.

VMware clipboard not working? Try these methods

1. Run VMware with administrator privileges

user with black laptop - VMware clipboard not working
This method might seem to simple to be true, but some users have had great results by doing this.

To try this out, you will need to first completely exit your VMware app (Workstation or Player), then right-click the executable file, and choosing Run as administrator.

If this method didn’t help, please follow the next ones.

2. Disable the folder sharing feature

laptop with user on couch - VMware clipboard not working
Because of some of the security features contained by VMware, your ability to use the clipboard can be disabled if using the folder sharing feature.

This is done to protect you from any key loggers, or other pishing tools found in the online environment.

To try this out, please follow these steps:

1. Open VMware -> navigate to the Settings of your problematic VM.
2. Under the Options tab -> select Shared Folders from the right-side menu.
3. Disable the Shared Folders option by ticking the corresponding box.

3. Suspend and resume VM

laptop on desk with user hands - VMware clipboard not working
1. Open your VMware application -> select your VM.
2. Enter your VM settings menu -> select Power.
3. Choose the option Suspend.
4. Close and then restart your virtual machine.
5. Select your VM -> choose Resume.
6. Your clipboard should work now, if it doesn’t, please try the next method.

Is VMware not able to connect to the internet? Fix it

4. Uninstall and reinstall VMware Tools

mouse and keyboard - VMware clipboard not working
VMware tools come installed by default, and sometimes people don’t even know of its existence.

In some cases, a corrupted VMware Tools installation can cause issues with your VM. To make sure that this is not the case here, it is recommended that you remove it, and then reinstall it.

Conclusion

We explored some of the best-proven methods to solve the issue caused by your clipboard not working inside VMware.

Please make sure to follow the suggested methods carefully to avoid any other complications.

Feel free to let us know if you found this guide useful by using the comment section below.

READ ALSO:

Microsoft continues to pump Oct 2 Event, don’t miss this one!

Posted on by Kip Kniskern

Microsoft has been holding hardware events for years now, some of them mind-blowing, but some of them a bit on the ho-hum side. This year, however, is shaping up to be, as we’ve said before, a doozy. Microsoft has been pumping the event on social media, and has just released a compilation of Panos Panay moments that should be sure to get your blood flowing:

Some pretty good guesses as to what is to come have leaked out, but this is going to be one to watch. We’ll be there, bringing you everything from the event and some behind the scenes coverage, too, so you might just want to plan to rearrange your schedule next Wednesday at 7am PDT and grab your popcorn, this one should be good.

Fix the unexpected error occurs in PSWS call error

Posted on by Milan Stanojevic

If you have administrator privileges, you can view, quarantine, or delete quarantined messages and files in Office 365.

It is worth mentioning that Office 365 has the default option to send directly to quarantine phishing and malware messages.

You can view and manage these files in the Security & Compliance Center.

However, many users encountered issues with this operation. They received the “Unexpected error occurs in PSWS call” error message.

What to do if the quarantine management page is broken?

1. Clear the cache of your browser

This issue might appear if the internet temporary files are corrupted. To fix the problem quickly, delete them from your browser.

To do this in Google Chrome, follow the steps below.

  1. Click on the three vertical dots from the upper-right corner of the windows.
  2. Go to More tools and select Clear browsing data.chrome clear data
  3. On the Advanced tab, select All time from Time range, check the first four, and click on Clear data.chrome clear browsing data

2. Start browser in private mode

Going in private mode is an interesting option for many browsers. Also, many users reported that going incognito solves the “Unexpected error occurs in PSWS call” error.

  1. In Google Chrome, go to the three vertical dots from the upper-right side of the window.
  2. Select New incognito window.https://windowsreport.com/wp-content/uploads/2019/09/new-incognito-window.png
  3. Once you opened Chrome in incognito mode, try the operation here.

3. Switch to another browser

Quite a few people reported that switching to another browser solved this problem.

We recommend Opera One browser. This particular alternative will offer valuable services, such as third-party integrations in the homepage, free VPN security, and a modern user-friendly interface.

Moreover, this tool is privacy-oriented, so you don’t have to go incognito – you already are in privacy mode by default.

So, you are always protected from online threats regarding identity or data, using a reliable adblocker and VPN service in the browser. Plus, it also comes with a built-in AI.

⇒ Get Opera One

Conclusion

The quarantine management is a very important function used by many people. Unfortunately, errors are common, and solving them might not be as easy as users want.

Luckily, the methods described above are simple. You can clear your cache, which is always a good idea even if your browser is running properly.

Also, you can choose another browser. We recommend UR for enhanced privacy protection and reliability.

Did our solutions help you fix the issue? Do let us know in the comments section below!

US Department of Interior moves 84K employees from Google apps back to Office 365

Posted on by Radu Tyrsina

The US Department of Interior has decided to move back 84,500 employees from Google apps to Office 365, according to a report from Federal News Network (via Windows Central). The new $94 million contract follows a previous battle between Google and Microsoft seven years ago, when the Interior ultimately chose Google to move its email to the cloud.

With this new contract, the US Department of Interior plans to leverage Microsoft tools to improve collaboration between DOI employees, as explained in this statement:

“The cloud based solution will support DOI employees by improving work collaboration methods, documentation flows, communication capabilities, streamlined email usage and management and overall increased business performance of DOI’s mission, cost and support objectives,” the statement of work states. “DOI goals include developing an integrated partnership to build a project that transitions accounts, data, technical controls, authentication or access capabilities and applications that make up the current cloud email and collaboration system into a modernized, secure, service enriched, email and collaboration system.”

The timing for this new contract is quite interesting, as Microsoft is still waiting on a decision regarding Pentagon’s $10 billion, multi-year JEDI contract. Last month, we also reported that the United States Defense Department agreed to use Microsoft’s 365 productivity software and solutions in a $7.6 billion deal.

Microsoft makes its ElectionGuard software for voting systems open source

Posted on by Kareem Anderson

Part of Microsoft’s Defending Democracy Program just became officially an open-sourced development kit (SDK) that, ideally, will enable more election campaigns to secure their communications in the future as well as put up additional safeguards around voting methods.

In May, Microsoft CEO Satya Nadella announced that it would be rolling out ElectionGuard as free open-source solution, but earlier this week the project finally became publically available across the company’s GitHub repositories.

Here is what’s being gifted to developers:

  • ElectionGuard specification. The ElectionGuard specification includes both “informal” and “formal” road maps for how ElectionGuard works. The informal spec is authored by Dr. Josh Benaloh of Microsoft Research and provides the conceptual and mathematical basis for end-to-end verifiable elections with ElectionGuard. The formal spec contains detailed guidance manufacturers will need to incorporate ElectionGuard into their systems, including a full description of the API – which is the way voting systems communicate with the ElectionGuard software – and the stages of an end-to-end verifiable election.
  • Software code. This repository contains the actual source code vendors will use to build their ElectionGuard implementations. It is written in C, a standard language commonly used by open-source software developers and includes a buildable version of the API. This documentation is also viewable here. This code was built together with our development partner Galois.
  • Reference verifier and specification. As we announced in May, ElectionGuard enables government entities, news organizations, human rights organizations, or anyone else to build additional verifiers that independently can certify election results have been accurately counted and have not been altered. The resources available on GitHub today include a working verifier as well as the specifications necessary to build your own independent verifier.
  • Ballot marking device reference implementation. Voting system manufacturers will be free to build ElectionGuard into their systems in a variety of ways. At the Aspen Security Forum in July, we demonstrated a sample voting system, built with the help of industrial designer Tucker Viemeister, that we believe showcased a great way the features enabled by ElectionGuard can be used in voting systems. The ballot marking device we demonstrated included accessibility features built under the guidance of the Center for Civic Design, authors of the original “Anywhere Ballot,” and incorporated the Xbox Adaptive Controller as an optional device to mark ballots. The ballot marking device open-source repository released today includes a variety of tools and visuals necessary to build or augment real-world election systems using the best of ElectionGuard.

While Defending Democracy is a program that is being offered both nationally and internationally, it appears that ElectionGuard is being pitched to US-based developers and “manufacturers of voting systems in the United States.”

Pre-orders open for 2 new Star Wars Jedi: Fallen Order Xbox One console bundles

Posted on by Radu Tyrsina

Star Wars Jedi: Fallen Order is set to launch in mid-November and hype is definitely beginning to build around the video game.

In addition to the release of a new story-focused trailer (which you can watch below), two new Xbox One console bundles were announced today as part of Lucasfilm’s Force Friday merchandise marketing promotion.

Each Xbox One bundle comes with a console (Xbox One S or Xbox One X), a digital code for the Star Wars Jedi: Fallen Order video game, the in-game digital pre-order bonuses (Orange lightsaber blade color, BEE D-1 skin, mygeeto campaign hilt, and umbaran campaign hilt), and digital codes for the OG Xbox Knights of the Old Republic and Knights of the Old Republic 2 video games which are now playable on Xbox One due to added backwards compatibility. A one-month trial of Xbox Game Pass, Xbox Live Gold, and EA Access is also included.

The Xbox One S Star Wars Jedi: Fallen Order bundle is currently up for pre-order for $299 while the Xbox One X bundle will set gamers back $499. Both have a release date of November 15th, the same day as the launch of Star Wars Jedi: Fallen Order.

For those who already have an Xbox One S or X console and are just needing to pre-order Jedi: Fallen Order, a special discount is being offered to all owners of Star Wars Battlefront II.

Are you excited for Star Wars Jedi: Fallen Order and are you thinking of grabbing either of these bundles? Share your thoughts with the community in the comments below and then follow us on Pinterest for more Xbox gaming content.

STAR WARS Jedi: Fallen Order™ Deluxe Edition
STAR WARS Jedi: Fallen Order™ Deluxe Edition
Download
QR-Code

STAR WARS Jedi: Fallen Order™ Deluxe Edition
Developer:
Electronic Arts
Price:
Free


STAR WARS Jedi: Fallen Order™ Pre-Order
STAR WARS Jedi: Fallen Order™ Pre-Order
Download
QR-Code

STAR WARS Jedi: Fallen Order™ Pre-Order
Developer:
Electronic Arts
Price:
Free

Why is Elara app preventing shutdown in Windows 10? [Solved]

Posted on by Milan Stanojevic

The Elaraapp is basically an application that comes pre-installed with most of the systems. This app basically improves the functionality of your pointing device.

However, there are many reports that this app prevented a good number of users from shutting down their Windows 10 systems. This can be rather annoying, so today we’re going to show you how to fix it.

Table of contents

What to if Elara app is preventing shutdown in Windows 10?

1. Check for Windows 10 & touchpad driver updates

  1. Search for the Settings app from the Start menu and open it.
  2.  Navigate to the Update and Security section and select Check for Updates.check for updates elara app preventing shutdown windows 10
  3. Your system will start to download all the latest updates. Wait until your system completes the installation process.
  4. Press Windows key + X and click Device Manager from the list of options.
  5. Go to Mice and other pointing devices section, right-click on a driver and click Update driver. Now select Search automatically for updated driver software. update driver elara app preventing shutdown windows 10
  6. Repeat the same process to update all the drivers listed under this section.
  7. Alternatively, you can manually download the latest updates from your hardware manufacturer’s website.
  8. Reboot your system to apply the changes.

For a quicker and safer experience that will remove any risk of installing a faulty driver, use dedicated updater software such as Fortect Driver Updater.

2. Create a new Registry Key

  1. Press Windows + R keys to open the Run dialog box on your screen. Type regedit and press the Enter button to open Registry Editor.
  2. Once the Registry Editor window is open, navigate to HKEY_CURRENT_USERControl PanelDesktop key in the left pane.create registry key elara app preventing shutdown windows 10
  3. Navigate to the right side of the window and right-click on an empty space. Click New >> DWORD (32-bit) Value. 
  4. Write the name of the new key AutoEndTasks, set its value to 1.
  5. Click the OK button to save the changes and close Registry Editor.

3. Remove Elara app from system

  1. Search for Control Panel from the Start menu and open it.
  2. Click Uninstall a Program from the Programs section.select uninstall a program elara app preventing shutdown windows 10
  3. Search for Elara app or other suspicious programs that you might see in the list of installed programs.
  4. Uninstall all of them one by one and finally click the OK button.

4. Remove Elara app from Google Chrome

  1. Launch the Google Chrome browser to remove extensions related to Elara App from it.
  2.  Navigate to the three dots menu and click More tools >> Extensions. Now remove all the suspicious extensions one by one by using the trash icon.remove extension elara app preventing shutdown windows 10
  3. Close the browser.

5. Restore your system

  1. Go to the Start menu and search for System Restore. Open the first result from the list. You might need to provide your administrator’s password.
    remove Elara app system properties window
  2. Follow the on-screen instructions to restore your system to a stable point.

FAQs

What is the Elara app on Windows?

The Elara app is a preinstalled touchpad control utility used on many laptops. It helps manage trackpad functions, gestures, and device-specific features. It’s usually part of your laptop manufacturer’s drivers.

Why does the Elara app prevent my laptop from shutting down?

This happens when the touchpad driver or a background process blocks shutdown to prevent data loss or driver corruption. It’s often caused by outdated drivers, stuck background tasks, or conflicts with other software.

Is it safe to end the Elara app task in Task Manager?

Yes. Ending the task won’t harm your system, but it may temporarily disable some touchpad features until you restart. Your laptop will still function normally.

How do I fix the Elara app preventing shutdown?

Update your touchpad driver, uninstall and reinstall the OEM touchpad software, disable startup apps that may conflict, or perform a clean boot. If the issue persists, running Windows Update or reinstalling device drivers often resolves it.

Elara app preventing your system from shutting down can be annoying. However, we hope that you managed to resolve it using one of these solutions.

Other programs can also block shutdown on Windows 10, so be sure to check our guide on apps preventing shutdown to quickly identify and stop stubborn processes.

Failed to connect to Ingest in Mixer [FIX]

Posted on by Milan Stanojevic

Mixer is one of the best platforms for streaming videos online. The service owned by Microsoft helps people stream video content such as online games.

So, the platform must work properly for everyone. Unfortunately, this is not always the case. Many users reported a major issue while using Mixer to stream videos. They failed to connect to the ingest server on Mixer.

The ingest servers are important for taking in video traffic and distributing to edge servers.

Also, several users encountered the “Failed to connect to Ingest” error message while trying to stream the games they play on Xbox.

Fortunately, there are some easy solutions available and today we will show you what to do if you encounter this problem.

Fix connection issues with Mixer

1. Unlink and relink your Microsoft account

The solution is as easy as it gets. You just need to unlink and relink your account from Microsoft.

2. Reset your modem or router

Sometimes, your modem or router could cause this issue. So, you might have an internet connection issue.

To fix that, reset your modem/router. Every device should have a reset button. Search this button on your model and press it.

Fix network problems with the help of our comprehensive guide!

3. Reboot your console

If your network connection is not the culprit and the problem persists, try rebooting your Xbox console.

Hold the power button for at least 10 seconds while the system is on.

Press the button again to start the console. The cache is cleared, your data is preserved, and some settings are reverted to default.

Conclusion

The “Failed to connect to Ingest” error is one of the most frequently met problems in video streaming. Luckily, the solutions to solve this error are not complicated or technical.

All the solutions above signify a syncing issue, whether on servers, your Microsoft account, or your console. So, unlink and relink your Microsoft account, reset your modem, or reboot your console.

If these methods don’t work, your problem might be more complicated and you’ll need technician support. Contact the Mixer team and describe your problem to start streaming videos again.

Did our solutions help you Did you find another method to fix the problem? Do let us know in the comments section below!

RELATED ARTICLES YOU NEED TO CHECK OUT:

Forgot Your Windows 10/11 Admin Password? Here’s What to Do

Posted on by Teodor Nechita

To log into a computer running on Windows 10, you’ll need an administrator account, secured by an administrator password. Not knowing your Windows administrator password can be quite troublesome.

Depending on the privileges of the administrator account, forgetting the password can prevent you from installing any software, or even logging into the PC altogether.

While password recovery isn’t all that simple due to security reasons, there are a few things you could do.

How to recover your Windows 10 Admin password?

1. Use a Password Reset Disk

This is the official method used by Microsoft when losing your password.

The only problem with the method is that the disk needs to be created beforehand.

If you have a password reset disk nearby, all you need is to log into your Windows 10 and simply ask for a password reset.

2. Log in using alternative sign-in options

You can use an elevated Command Prompt to reset your password.

The only problem is that you first need to log in using either through PIN, Picture Password, or another administrator account logged on that PC.

Once logged in, do the following:

  1. Press Windows + X
  2. Select Command Prompt (Admin)
  3. Type in the following command line:
net user account_name new_password

Replace account_name with your username, and new_password with the new password you’d like

Forgot windows 10 admin password Login with Other Sign-in Option

Alternatively, you could use a third-party password recovery tool that will be able to perform live memory analysis and provide you with the desired data within minutes.

⇒ Get Passware

3. Reset your Microsoft Admin Account password online

Forgot windows 10 admin password Reset Microsoft Account Password Online

Visit the Windows Live password reset page and simply request a password change from there.

The only thing you should know is that you need to have provided an alternate E-mail address and phone number.

4. Reset your Windows 10 Admin password with PCUnlocker

With PCUnlocker you can simply create a bootable image on a CD or a USB stick.

Afterward, you just need to boot from the image, and you’ll see all the accounts logged into that PC.

Once there, select one of your local accounts and click on Reset Password button.

Forgot windows 10 admin password PCUnlocker

5. Reset your Windows 10 Admin password with MSDaRT

DaRT, also known as Microsoft Diagnostics and Recovery Toolset is a professional tool created by Microsoft.

All you need to do is boot your PC with A DaRT Recovery Disk.

Then you just launch the built-in Locksmith Wizard tool, which allows you to reset the Windows 10 password of any local account.

The only downside to this is that DaRT is not free.

Forgot windows 10 admin password MSDaRT

6. Restore your PC to a previous state

If you don’t know how to use a reset disk, or if your PC is encrypted with a BitLocker, your only choice is a system restore.

The only drawback is that you need to remember the password you used to have at that exact time.

More so, keep note that this method is also the only one with the potential to delete programs.

If you’re on an older version of Windows, don’t miss our guide on how to reset your Windows 7 passwords without logging in. And if your Windows 11 password changes on its own, we know what to do.

Ever wondered what is default password on Windows 11? We have a guide that will answer all your questions, so don’t miss it.

4K TV Not Upscaling? Try These Solutions

Posted on by Tashreef Shareef

4K TVs are becoming the new norm, with the Chinese OEMs launching affordable 4K Televisions every few months. From being a cutting-edge technology a few years ago, 4K TVs are now mainstream. However, with 4K TVs, we have 4K TVs not upscaling issues as well.

Just because you have a 4K TV doesn’t mean everything you watch on TV is 4K. To experience true 4K, you must also have 4K content. 4K content is still a rarity because most of the videos are still in Full HD resolution due to the size and cost of making 4K content.

To overcome this situation, TV manufacturers use 4K upscaling. Upscaling makes standard definition and Full HD videos look better on a 4K TV. However, if you notice the videos coming to your TV take only a quarter of the screen, it means your TV is not upscaling successfully.

If you are also troubled by this issue, here are a couple of troubleshooting tips to fix the 4K TV not upscaling, problem.

What can I do if 4K TV not upscaling (Sony, Samsung, LG)?

1. Check the signal quality

4K TV not upscaling
  1. While the 4K TV should have no problem with upscaling HD and Full HD content, if the content is in an SD or lower version, try to bump up the quality from the streaming service settings.
  2. If the signal coming to the TV is not high quality, the TV will scale to match the TV’s size. However, this can lead to blurry and fuzzy images.
  3. Check if the 4K TV not upscaling issue is fixed.

2. Check the connection source

4K TV not upscaling
  1. Another thing that can affect the picture quality and upscaling issue is the connection method you are using.
  2. The quality of the connection method is important. The best connection method for the highest quality is to use the HDMI connection. If HDMI is not available, check for the DVI method. Other connection methods like VGA, Component A/V, S-Video, Composite A/V, and Analog RF offer low-quality output, respectively.

3. More troubleshooting options

  1. Press the info button available on the TV remote to check the input resolution on top of the TV screen. If the resolution does not match the output device, change it to the optimum resolution of your TV.
  2. Perform the picture test. Move the video to your USB device and then check the quality of the TV. If the quality is better while playing from the USB Drive, the issue is with your external device.

Almost all the 4K TVs offer some upscaling. However, not all the upscaling is equal. Premium brands like Sony, Samsung, and LG have better-upscaling technology on their high-end TVs.

The TV should upscale successfully, even from HD+ or Full HD resolutions, and we hope the image looks fine on your screen now.

Follow the steps in this article to fix the 4K TV not upscaling issue, and let us know which method worked for you in the comments.

File & Print Sharing Resource is Online But Not Responding

Posted on by Tashreef Shareef

While trying to access one or multiple shared connections or folder across the local network, Windows users may run into File and print sharing resource is online but isn’t responding to connection attempts message.

This can be a problem, and it can cause network sharing to not work properly, so it’s important to fix it. The process is rather simple, so be sure to keep on reading.

Why does file and print sharing resource is online but isn’t responding to connection attempts appear?

  • Issues with your Wi-Fi or wired connection can cause this and many other issues.
  • Missing Windows updates can sometimes cause this problem.
  • Firewall settings can prevent sharing services from working properly.

How can I fix File and Print Sharing resource is online but isn’t responding to connection attempts?

1. Check if the computers are discoverable

Connecting via Wi-Fi adapter

  1. Click on Start and select Settings.
  2. Select Network and Internet.
  3. From the left pane, click on the Wi-Fi tab.
    File & print sharing resource online isn't responding
  4. From the right-pane click on your Wi-Fi network.

  5. Under Network Profile select Public option.
  6. Do the same with all the computer on the network that uses the Wi-Fi connection.

Connecting via Ethernet adapter

  1. Click on Start and select Settings.
  2. Click on Network and Internet.
  3. Select the Ethernet tab from the left pane.
  4. From the right pane, click on the Network adapter.
  5. Under Network Profile,  select Private option.
  6. Now you need to repeat these steps with all the computers that are available on the network.

Now that you have configured all the computers to be discoverable try to access the shared folder and check if the error is resolved.

2. Install pending Windows updates

  1. Click on Start and select Settings.
  2. Go to Updates and Security.
    File & print sharing resource online isn't responding
  3. Click on Windows Update.
  4. Check if any update is available. Click on Download now to download and install the update.
  5. Once the update is installed, restart the computer and check for any improvements.

After doing that, check if File and print sharing resource is online but isn’t responding message is gone.

3.  Disable Windows Firewall

  1. The Windows Defender Firewall may sometime block the connection that it may tag as unsafe. Try disabling Windows Defender Firewall temporarily and check for any improvements.
  2. Click on Start and select Settings.
  3. Go to Update and Security.
  4. Click on Windows Security.
    File & print sharing resource online isn't responding
  5. From the right pane, click on Firewall and Network Protection.
  6. Click on the currently active network.
    File & print sharing resource online isn't responding
  7. Click the toggle switch under Windows Defender Firewall to turn off Windows Defender Firewall.
  8. Now try to access the shared folder and check if the File and print sharing resource is online but isn’t responding to connection attempts error is resolved.
  9. Make sure you turn on the firewall once the error is resolved.

As you can see, File and print sharing resource is online but isn’t responding to connection attempts can be easily fixed.

This isn’t the only sharing issue, and in the past, we wrote about how to fix a shared folder if it’s not accessible, so you might want to check that guide as well.

Did you find a different solution? If so, share it with us in the comments section below.

How to fix Asana not working in Chrome

Posted on by Matthew Adams

Asana is a web-based project management app that users can utilize in Google Chrome, Firefox, Safari, and Internet Explorer. Some users have said on Asana’s forum that they can’t connect to Asana in Chrome even though their net connections are ok. Asana might get stuck on its loading screen for some users. Thus, Asana doesn’t always work in Chrome and other browsers.

How Can Users Fix Asana in Chrome?

1. Is Asana Down?

Asana might be generally down for all users. Users can check if Asana is down at Downdetector. Open the Downdectector page. Then enter ‘Asana’ in the search box and press Return to open the page shown directly below. That page tells users if Asana is generally down or not.

Downdetector asana not working in chrome

2. Clear Chrome’s Data

  1. If Asana isn’t down, try clearing Google Chrome’s data. Click the Customize and control Google Chrome button at top right of the browser’s window.
  2. Select the More tools submenu, and then click the Clear browsing data option.

    The Clear browsing data window asana not working in chrome

  3. Select the Browsing history, Cookies and other site data, and Cached images and files options on the Clear browsing data window.
  4. Select the All time option on the Time range drop-down menu.
  5. Then click the Clear data button.

3. Turn Off all Browser Extensions

  1. Asana might not work due to certain browser extensions. To turn all Chrome’s extensions off, click the Customize Google Chrome menu button.
  2. Select More tools and Extensions to open the tab shown directly below.

    Extensions tab asana not working in chrome

  3. Click the buttons at the bottom right corner of each extension box to turn the extensions off.

    An extension button asana not working in chrome

4. Reset Google Chrome

  1. Resetting Chrome will both clear its data and turn off all extensions. To do that, select Settings on Chrome’s menu.
  2. Click the Advanced button to expand the Settings tab.
  3. Scroll to the bottom of the tab where there’s a Restore settings to their original defaults option. Click the Restore settings option.

    The Restore settings option asana not working in chrome

  4. Click the Reset settings button again to confirm.

5. Open Asana Within an Incognito Window

Alternatively, users can effectively disable all Chrome’s extension by opening the browser’s Incognito window. To do that, click the Customize and control Google Chrome button. Then select New Incognito window to open a Chrome window as shown below. Try utilizing Asana within the Incognito window instead.

The Incognito window asana not working in chrome

6. Update Google Chrome to Latest Version

Asana doesn’t support all Google Chrome versions. So, users browsing with older Chrome versions might need to update the browser. To do that, select Help and About Google Chrome on the browser’s menu. That will open the tab shown below which will update the browser if it’s not the latest version.
About Chrome tab asana not working in chrome

7. Turn Off Firewalls

  1. Asana might not work because of firewall blocks. To fix that, press the Windows key + S hotkey.
  2. Input ‘firewall’ in the search box and click Windows Defender Firewall to open the window shown directly below.

    The Windows Defender Firewall applet asana not working in chrome

  3. Click Turn Windows Defender Firewall on or off, which opens the options shown in the snapshot directly below.

    Turn off WDF options asana not working in chrome

  4. Select both Turn off Windows Defender Firewall settings there, and press the OK button.

Users might also need to uninstall, or at least disable, third-party antivirus software that could be blocking Asana. To temporarily disable an antivirus utility, users can usually right-click its system try icon and select a disable or turn off setting of some kind. Alternatively, open the settings tab for the antivirus software to select a disable or turn off option from there.

The resolutions above might fix Asana for some Google Chrome users. Aside from those fixes, try utilizing Asana in the other supported browsers.

RELATED ARTICLES TO CHECK OUT: 

How to Fix Common Madden NFL 20 Issues

Posted on by Teodor Nechita

While not as popular as its Football counterpart, FIFA 20, Madden NFL 20 is another sports title from EA with an impressive number of fans.

This American football-themed game series has been in the gaming industry for some time and is still going strong.

However, just like FIFA 20, Madden NFL 20 has its fair share of bugs and issues. Thankfully, the most common among them have known solutions.

Which are the most common Madden NFL 20 issues?

1. Players are experiencing extremely slow downloads

Try checking your Internet connection for problems.

Try restarting your console or PC and resume downloading.

Pause the download for a few seconds, and resume it:

  1. On Xbox One, go to Games & Apps
  2. Choose the Queue and then on Madden 20
  3. Press the three lines button on your controller and choose pause installation.
Madden 20 common issues pause xbox game download

2. Players are having installation problems

Try restarting your console or PC and resume the installation.

Make sure you have enough storage space for Madden NFL 20.

  • For PC:
  1. Press Windows
  2. Type in This PC
  3. Right-click on the partition where you want to install Madden NFL 20
  4. Check how much free disk space you have
Madden 20 common issues cehck PC disk space
  • For Xbox:
  1. Press the Xbox button to open the guide.
  2. Select System
  3. Go to Settings
  4. Select System
  5. View Storage.
Madden 20 common issues check Xbox disk space

Try clearing your system cache  (beware that this will delete any game saves unless synced with the cloud).

  • For Xbox:
  1. Press the Xbox button to open the guide.
  2. Select System
  3. Go to Settings
  4. Select System
  5. View Storage.
  6. Press Clear local saved games
Madden 20 common issues clear save game data
  • Once that is finished, proceed as follows:
  1. Once finished, select Settings
  2. Choose All Settings
  3. Go to Network
  4. Choose Network Settings
  5. Select Go offline
  6. Restart the Xbox
Madden 20 common issue go offline

3. Players have issues with MUT 20

Some players see an error message that looks something like this when finishing MUT challenges:

Madden 20 common issues MUT error

If you see it, try to exit the challenges and enter the main Ultimate Team menu.

If that doesn’t fix it and you consistently see the error message, check your Internet connection.

4. Players are reporting missing Madden bonus items

Make sure you redeemed the code associated with the bonus item.

Ensure you don’t share the game since only the first player gets the bonus.

One method worked when similar issues happened in Madden 19:

  1. Turn the Xbox entirely off.
  2. Unplug the power cable for 2-3 minutes.
  3. Plug the cable in, turn the Xbox on, and open Madden 20.
  4. Go to MUT, to Store and Claim Packs even if it says 0.

5. PC users are having general audio and video problems

Disable the Origin overlay during the game while running Madden 20.

Disable full-screen optimizations:

  1. Right-click the Madden 20 icon on your Desktop or Start Menu
  2. Select Properties
  3. Click Compatibilities
  4. Check Disable Fullscreen optimizations
Madden 20 common issues full-screen compatibility

A common consensus for solving most video issues is to run the Madden 20 process in real-time in Task Manager and using DirectX 11.

Besides that, you can as well try to reinstall or update video and audio drivers using specialized software, such as Fortect Driver Updater.

6. Fix common lag and connection issues

Try restarting your console, router, and modem, as this can solve most of the issues.

If that doesn’t help, consider opening ports on your network.

For a more in-depth guide on opening ports for MaddenNFL 20, visit this helpful guide.

7. Fix common controller mapping issues

Plenty of users are running into controller mapping issues.One solution would be to open origin and perform a game repair.

In case you encountered the Play Trial Error while playing Madden 24, we have a detailed guide to fix the issue.

If that doesn’t work either, all you can do is wait for a new patch to fix the problem.

Keep note that in the case of FIFA 20, EA stated that they only support Xbox controllers on PC.

FIX: Overwolf’s overlay doesn’t stay on top

Posted on by Matthew Adams

Overwolf is neat gaming software that enables users to open an in-game dock overlay in games from which they launch apps. However, that dock might not always appear in games for some players when they press its hotkey.

Here are a few troubleshooting tips for users who need to fix Overwolf docks that don’t overlay in games.

What to do when the Overwolf dock is not showing in games?

1. Is the game supported?

The Overwolf dock won’t open in any games that aren’t supported. So, check that Overwolf supports the game its dock doesn’t open in. Open the Overwolf Supported Games page to check if the software supports the game.

Overwolf's supported games page overwolf won't stay on top

2. Check Overwolf’s Keyboard Settings

  1. Check that the default Ctrl + Tab hotkey for Overwolf’s dock has not been changed in any anyway. Users can do that by clicking the arrow button at the top left of the Overwolf appstore window.
  2. Select Settings to open the Settings window shown directly below.The Settings window overwolf won't stay on top
  3. Click Hotkeys on the left of the window.
  4. Thereafter, users can adjust the Change/Dismiss Overwolf in-game hotkey if required.

Want to become Windows 10 pro? Here are few useful shortcuts you should know!

3. Disable Razer Synapse Data Tracking

Razer Synapse’s data tracking stops the Overwolf overlay showing in games. Razer Synapse users can fix that by clicking the Stats tab and the settings (cog) button in Synapse. Then turn off the Data Tracking option.

Razer Synapse's Data Tracking option overwolf won't stay on top

4. Remove Conflicting Startup Software

  1. Software such as the Asus AI suite, MSI apps, and antivirus utilities can also conflict with Overwolf. To ensure there are no potential software conflicts, open Run with the Windows key + R hotkey.
  2. Then enter ‘msconfig’ in the Open box, and select the OK option.The System Configuration window overwolf won't stay on top
  3. Click the Selective startup radio button.
  4. Deselect the Load startup items check box, which will remove third-party programs from the system startup.
  5. Select the Use original boot configuration setting.
  6. Then click the Apply button, and select the OK option.
  7. Click the Restart button.

5. Change the Game’s DirectX Settings

Changing a game’s DirectX settings to DirectX 9, 10, or 11 might fix the Overwolf dock for some users. Users can do that if their graphics cards supports DirectX 10/11.

To change the DirectX settings, open a game’s graphics options. Then select a DirectX 10 or 11 mode under graphics hardware options.

DirectX logo overwolf won't stay on top

DirectX isn’t compatible with this version of Windows? Here’s how to fix it!

6. Uninstall Graphics-Enhancing Software

Uninstalling graphics-enhancing software, such as SweetFX, is another potential resolution. If users can’t uninstall the graphics-enhancing software via Programs and Features, open the graphics enhancer’s folder in File Explorer.

Right-click the folder and select Delete. Then open the Recycle Bin, and click the Empty Recycle Bin option.
The Recycle Bin overwolf won't stay on top

7. Edit the Registry

  1. Try this registry fix for Overwolf in Windows 10. Open the registry, via Run, by pressing the Windows key + R hotkey.
  2. Input ‘regedit’ in Run’s Open box and click OK to launch the Registry Editor.The Registry Editor overwolf won't stay on top
  3. Then open this registry path within the Registry Editor:
    • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options
  4. Delete the overwolf.exe key on the left of the window by right-clicking it and selecting Delete.
  5. If there’s an overwolflauncher.exe key, right-click the overwolflauncher.exe key and select Delete.

Those are few resolutions that might fix the Overwolf dock when it doesn’t open in games. They aren’t necessarily guaranteed fixes, but they might fix the Overwolf dock for some users. For further resolutions, users can get in touch with Overwolf support via its contact us page.

RELATED ARTICLES TO CHECK OUT: 

Windows 10 version 1903 gets a new optional update with build 18362.387

Posted on by Radu Tyrsina

After Windows 10 versions 1809 and older received new optional updates earlier this week, it’s now the latest version of the OS that is getting some love today. The build 18362.387 (KB4517211) for Windows 10 Version 1903 is now available with a long list of fixes, including one for the issue that was causing audio in certain games to be quieter or different than expected.

You can read the full list of quality fixes below:

  • Addresses an issue that causes vertical fonts to be larger when printing to a PostScript printer.
  • Addresses an issue that causes printing from 32-bit applications to fail with an “Access is denied” error when you select Run as different user for the application.
  • Addresses an issue that may give write access to a removable USB disk when a user switches from a privileged user to an unprivileged user.
  • Addresses an issue that causes the lsass.exe service to stop working, which causes the system to shut down. This occurs when migrating Data Protection API (DPAPI) credentials using dpapimig.exe with the –domain option.
  • Addresses an issue that gives a Windows Hello for Business user two certificates for authentication during certificate renewal instead of one certificate.
  • Addresses an issue that prevents a web browser from connecting securely to Windows Server. This occurs when using a client authentication certificate, such as a SHA512-based certificate, and the web browser does not support a signature algorithm that matches the certificate.
  • Addresses an issue that may cause authentication to fail for certificate-based authentication when the certificate authentication includes a cname as part of the pre-authentication request.
  • Addresses an issue that prevents a Microsoft App-V application from opening and displays a network failure error. This issue occurs under certain circumstances, such as when a system’s battery is low or there is an unexpected power failure.
  • Addresses an issue that causes a query request of the Win32_LogonSession class for the StartTime to display the value of the epoch (for example, 1-1-1601 1:00:00) instead of the actual logon time. This occurs when a user who isn’t an administrator creates the query request.
  • Addresses an issue that causes File Explorer to show a regular file icon for files marked with FILE_ATTRIBUTE_OFFLINE instead of the expected placeholder icon.
  • Addresses an issue with intermittent virtual private network (VPN) disconnections on cellular networks.
  • Addresses an issue that may cause audio playback and recording to fail when connecting to a remote virtual machine.
  • Addresses an issue with MSCTF.dll that causes an application to stop working.
  • Addresses an issue with the input and display of special characters that occurs when an app uses imm32.dll.
  • Addresses an issue with resizing Windows Presentation Foundation (WPF) applications; they may not respond to being resized using the mouse until you release the mouse button.
  • Addresses an issue that may prevent older systems from upgrading to the latest operating systems because of an error in the display driver of older versions.
  • Addresses an issue that may cause the screen color to turn white on laptops that have built-in, high-dynamic-range (HDR) screens.
  • Addresses an issue with converting an application from 32-bit to 64-bit architecture.
  • Addresses an issue that prevents you from running the Active Directory Diagnostics Data Collector Set from the Performance Monitor for Domain Controllers. This causes the Data Collector Set name to appear empty. Running the Active Directory Diagnostics Data Collector Set returns the error, “The system cannot find the file specified.” Event ID 1023 is logged with the source as Perflib and the following messages:
  • “Windows cannot load the extensible counter DLL “C:\Windows\system32\ntdsperf.dll.”
  • “The specified module could not be found.”
  • Addresses an issue that causes audio in certain games to be quieter or different than expected.
  • Addresses an issue that prevents Microsoft App-V from handling a parameter of the CreateProcess API properly, which prevents the virtual process from opening.
  • Addresses an issue in which the maximum central processing unit (CPU) performance is not enabled when you select the High Performance power plan.
  • Provides a way to configure the read buffer size. This allows you to address an issue with slow upload times when uploading a file to a Universal Naming Convention (UNC) share using the Internet Information Services (IIS) Web Distributed Authoring and Versioning (WebDAV) feature.
  • Addresses an issue that causes a device to stop working when opening files from a network drive that has client-side caching enabled. This issue may occur when the device has certain third-party antivirus products installed and the drive is backed by a server that is not a Microsoft Server Message Block (SMB) server. The error code is, “0x27 RDR_FILE_SYSTEM.”
  • Facilitates the configuration of devices that are managed by mobile device management (MDM) settings, which are created by ADMX ingestion. You can update a previously ingested ADMX file with a newer version, and you are not required to delete the previous ADMX file. This solution applies to all applications that use ADMX ingestion.

As of this writing, this new build has only known issue with some Input Method Editors (IME) potentially causing high CPU usage, though this bug was already present in this month’s Patch Tuesday. If you prefer not to install this optional update on your PC, keep in mind that you’ll still get all these qualify fixes in next month’s Patch Tuesday update.

FIX: Windows Push Notification User Service stopped working

Posted on by Milan Stanojevic

For those who are not familiar, Windows Push Notification User Service offers support for push and local notifications on Windows 10 OS.

Sometimes the notification service might stop working and there are numerous reports that it keeps crashing on their systems. Windows 10 users can’t receive any notification on their PCs in that case.

This issue is reported on the official Microsoft forum in the following manner:

The problem is when the computer starts it shows an error called windows push notification user service has stopped working. Besides different windows store apps are not working. I reinstalled a few and they worked then but most apps didn’t. Hope to get a solution from you soon.

Here below we have listed some common solutions that helped many Windows 10 users to get rid of this error.

What to do if Windows Push Notification User Service doesn’t work

1. Scan for Memory Leaks

  1. Head towards the Start menu and search for Command Prompt.
  2. Righ-click on the first result and select Run as administrator. run cmd windows push notification user service has stopped working
  3. Type the following command press the Enter key:                                                                                                          run sfc/scannow windows push notification user service has stopped working
  4. Wait for the process to complete and reboot your system.
  5. Check if the problem is resolved.

2. Restart WpnUserService Manually

  1. To manually restart the service, open Command Prompt from the Start menu.
  2. Type the following commands and hit the Enter key:
  • sc config WpnUserService start= auto
  • sc start WpnUserService

run sc config windows push notification user service has stopped working

Restart your system to apply the changes.

3. Rename or Delete the Notifications Folder in Safe Mode

  1. The latest Windows 10 update might have corrupted the notifications database and you need to delete or rename its folder.
  2. Press the Windows + R keys to open Run dialog on your system.
  3. Type msconfig and click the OK button.open msconfig windows push notification user service has stopped working
  4. Once the System Configuration window opens on your screen, go to the Boot tab and click the checkbox beside the Safe Boot option.
  5. Click OK and reboot your system. Your system will now boot into the Safe Mode.
  6. Open This PC and navigate to the following location:
    • C:\Users\YOURUSERNAME\AppData\Local\Microsoft\Windows
  7. If you can’t see the AppData folder, navigate to the FileExplorer menu and click the View tab.
  8. From the Show/hide section, click the Hidden items checkbox to show the hidden files in the File Explorer.
  9. Once you are insider the Windows folder, find the Notifications folder and right-click on it.
  10. Click Rename, type a random name and restart your system.

4. Install the latest updates

  1. Open the Settings app from the Start menu and click Update & security. 
  2. Click the Check for updates button from the Windows Update tab.check for updates windows push notification user service has stopped working
  3. Finally, reboot your system once Windows finishes the update process.

Were you able to fix Windows Push Notification User Service has Stopped Working error using any of these solutions? Comment down below.

RELATED ARTICLES YOU NEED TO CHECK OUT:

Microsoft is fighting to “curb the overuse” of government requests for enterprise data stored in the cloud

Posted on by davew

Microsoft wants everyone to know how serious the company takes the privacy and security of its customers. As noted in a Microsoft on the Issues blog post, the Redmond, Washington company outlined its guidelines for handling government and law enforcement requests for customer information. Microsoft details that in the matter of full transparency, Microsoft will notify its customers when such a request is made.

“We believe customers have a right to know when law enforcement requests their email or documents, and we have a right to tell them. The reason is simple – we believe our customers own their data and have the right to control it. Absent extraordinary circumstances, government agents should seek data directly from our enterprise customers, and if they seek our customers’ data from us, they should allow us to tell our customers when demands are made. We believe strongly that these fundamental protections should not disappear just because customers store their data in the cloud rather than in file cabinets or desk drawers.

When a law enforcement agency presents Microsoft with a legally valid warrant, court order or subpoena requesting data that belongs to one of our enterprise customers, we seek to redirect that request to the customer. And in the vast majority of cases, that is exactly what happens. There are times, however, when the government comes to us for data and prevents us from telling our enterprise customers that it is seeking their data. We agree that there are some limited circumstances in which law enforcement must be able to operate in secret to prevent crime and terrorism and keep people safe. And while we agree that secrecy orders that prevent us from notifying our customers may be appropriate in those limited circumstances, we also believe there are times when those orders go too far.”

The simple reasoning behind this is that Microsoft knows that its customers own their own data and should be notified whenever an unauthorized person or entity is trying to access that information. As a cloud services provider, Microsoft deems it necessary to notify its customers how it handles customer data and privacy in the United States and around the globe.

How to use desktop shortcuts in Windows 10

Posted on by Radu Tyrsina

Desktop shortcuts are a staple of the Windows interface. Despite the move to Start menu live tiles with Windows 8 and Windows 10, desktop icons remain as a less distracting and simpler alternative. In this guide, we’ll show you a different approaches to creating and organising your shortcuts.

Adding desktop shortcuts in Windows 10

In general, the quickest way to create a new shortcut is by right-clicking a file, folder or program and dragging it over your desktop. Click “Create shortcut” in the context menu to add a link to the desktop.

Adding desktop shortcuts in Windows 10

You may also right-click your desktop and choose New > Shortcut. You’ll need to choose an item to link to from your PC. This could be a file, folder or program. An alternative method is to right-click an item in File Explorer and choose Send to > Desktop (create shortcut).

You can create shortcuts to apps from the Microsoft Store too. To do this, open your Start menu and find the app to link to. Drag it from the menu onto your desktop to create the shortcut.

Adding desktop shortcuts in Windows 10

With your shortcuts created, you can now customise how they display. If you like, you can manually rearrange them into a unique layout. However, Windows does have built-in sorting options which can automate the process. Right-click your desktop and click “Sort by” to rearrange your icons.

The “View” sub-menu houses some useful options too. You can change the size of your desktop icons or opt to hide them altogether, decluttering your desktop. Further settings let you remove the hidden icon grid, enabling true freeform positioning, or automatically arrange icons into a tidy layout. Experiment to build a desktop that works for you.

13 new ID@Xbox games are coming soon to Xbox Game Pass for PC and console

Posted on by Radu Tyrsina

Microsoft announced today during its ID@Xbox Game Pass Fall 2019 showcase that more ID@Xbox games are coming to Xbox Game Pass for PC and console in the next couple of months. There are already several indie games included in Microsoft’s game subscription service, but 13 new ID@Xbox titles will soon join Game Pass Across Console and PC, and you can find all details below.

  • Xbox Game Pass for Console and PC titles: Munchkin, Lonely Mountains: Downhill, Demon’s Tilt, Genesis Noir, Minit, The Talos Principle, Vambrace: Cold Soul:
  • Xbox Game Pass for Console titles: Yooka Laylee, The Escapists 2
  • Xbox Game Pass for PC titles: Cities: Skyline (Windows 10 Edition), Dead by Daylight, The Red Strings Club, State of Mind

You can watch the video of the ID@Xbox Game Pass Fall 2019 showcase below, which features video trailers for all these new games as well as interviews of some of the developers behind them.

If you have yet to try Xbox Game Pass, we remind you that can still get 2 months of Xbox Game Pass Ultimate for just $2. This premium tier includes Xbox Game Pass for console, Xbox Game Pass for PC, as well as Xbox Live Gold.

Xbox Game Pass Ultimate
Xbox Game Pass Ultimate
Download
QR-Code

Xbox Game Pass Ultimate
Developer:
Microsoft Corporation
Price:
$1.00