Fix: Hulu Error Code P-DEV317

Trouble calls when you spot a P-DEV317 error when trying to stream on Hulu. As with many other like error codes, there are basic troubleshooting steps.

Here at WindowsReport, this is an error we’ve experienced, so rest assured that these are tried and tested solutions.

What does Hulu Error Code P-DEV317 mean?

This is an error that pops up on your screen when you attempt to watch live content. Your screen will not load any video. According to most users, it happens because of an adblock extension, but your internet connection, type of browser, and outdated software also top the list.

How do I fix error code P-DEV317 on Hulu?

A few basic workarounds before the slightly technical steps you should try include:

  • Close the Hulu app or browser, including any background programs, and reopen it.
  • Perform an internet speed test of your connection and ensure it meets Hulu’s recommendations.
  • Check for any app or browser updates.
  • Ensure that your computer’s date and time settings are correct.

1. Disable your adblocker extension

  1. Launch your browser, in this case, Chrome, and in a new tab, enter the following address:chrome://extensions/
  2. Peruse through your extensions and toggle the Disable button for your adblocker plugin. UBlock was the most reported adblocker in this case.
  3. While you’re still here, look through all your extensions and expunge any suspicious-looking ones. Repeat this step until you find the culprit.

2. Clear cache

2.1 Android app cache

  1. Tap on settings on your phone.
  2. Next, tap on Apps.
  3. Find the Hulu app and tap on it.
  4. Scroll down and select Storage.
  5. Tap on Clear data and Clear cache, then try again.

2.2 Android TV cache

  1. On your TV, find your Settings.
  2. Go to Apps and select Hulu.
  3. Scroll down and hit Clear data and Clear cache.

2.3 Browser cache

  1. Click the three horizontal dots and select Settings.Settings CHrome
  2. Launch your browser, and for this step, we shall be using Google Chrome.
  3. Go to Privacy and security and click Clear browsing data.
  4. Select Browsing history, Cookies and other site data, & Cached images and files, then click Clear data.

3. Perform a system update

Whether you’re using a TV, Android, iOS or Windows PC to stream Hulu, ensure your firmware is up-to-date. For Windows users, all you have to do is check for the latest updates and install if available.

Other devices like TVs and mobile phones usually receive automatic system updates, but you can always check with your manufacturer and update accordingly.

4. Reset the Hulu app

  1. Hit the Start Menu icon on the Taskbar and click on Settings.settings windows 11
  2. Click on Apps on the left pane, then select Apps & features on the right pane.
  3. Navigate to Hulu app, click on the three ellipses and select Advanced options.
  4. Scroll down and select Reset.
  5. Follow the on-screen prompts and try again.

5. Reinstall the Hulu app

  1. Hit the Start Menu icon on the Taskbar and click on Settings.settings windows 11
  2. Click on Apps on the left pane, then select Apps & features on the right pane.
  3. Navigate to Hulu app, click on the three ellipses and select Uninstall.
  4. Launch the Microsoft Store, search for the Hulu app, and click Install.
  5. Follow the on-screen prompts and try again.

6. Use a VPN

If Hulu detects that you’re in a location where it doesn’t serve any content, it will block access to its website. And if you were already using one but still getting the same P-DEV317 error, Hulu has probably detected that you’re using one.

If so, switch to another reliable VPN service provider. Free VPNs are unstable and can be easily detected since they don’t give you unique IP addresses.

7. Reset your network

  1. Hit the Windows key and click on Settings.settings windows 11
  2. Navigate to Network & internet.
  3. Select Advanced network settings.going advanced network settings win11
  4. Click on Network reset.Network Reset 1
  5. Next, hit the Reset now button.Network Reset now

You can resolve a lot of Hulu network and playback errors like error code 301-95 by resetting your network. This allows you to clear any technical glitches with your router and re-establish the connection.

8. Contact customer support

Having tried all the above steps, but the error P-DEV317 on Hulu is still persistent, it’s time to seek further assistance. Luckily, Hulu’s customer support is very responsive. You can also contact them on their X official handle for a faster response.

Meanwhile, as you wait for a fix, you can explore other streaming apps that offer equally great content. This way, you don’t have to depend on one service when it’s facing temporary glitches.

This isn’t the only issue you can encounter, and we already covered Hulu P-DEV313 error and Hulu error P-DEV336 in our other guides, so don’t miss them.

Out latest guide covers Hulu error P-DEV318, so if you want to learn more, don’t miss it.

So go ahead and try these easy-to-do solutions that we’ve shared. If you have tried any other that seems to be missing from our list, don’t hesitate to share it with us in the comment section below.

ESPN is Asking For TV Provider: How to Bypass it

If the prompt to select a TV provider when trying to sign up for ESPN Plus has left you bewildered, this guide can help!

We will discuss the probable causes and offer practical solutions for signing up for ESPN without the need for a TV provider, allowing you to watch your favorite sports.

Why do I need a TV provider if I have ESPN+?

An ESPN+ subscription doesn’t give access to the ESPN TV network content, and if you want to watch that, you need a satellite or cable subscription.

However, you can enjoy live shows, an on-demand library, studio shows, and other exclusive content with a separate subscription. If you already have the service and still get this error, some of the common reasons:

  • Incorrect account information.
  • The ESPN Plus app is outdated.
  • Corrupted app cache.
  • You are using the app with more than 3 users.

How do I bypass the ESPN TV provider?

Before proceeding with any steps to fix the issue, go through the following preliminary checks:

  • Verify if you have a stable connection with at least 25 Mbps speed.
  • Streaming devices like Apple TV, Android Smart TV, Fire TV stick, or Roku.
  • ESPN Plus active subscription with the mentioned device limit.

1. Login using the streaming service

  1. Launch the ESPN Plus app on your TV or mobile device.
  2. Locate Settings.chrome_Settings - TV provider - ESPN is Asking For TV Provider
  3. Choose the TV provider option.TV provider
  4. Select your service provider from the list, and look for the streaming service name that you have.Select the provider
  5. Enter the login credentials and sign in to get rid of the ESPN asking for TV provider issue.

2. Delete the browsing history & disable extensions (works for computer, & mobile devices)

  1. Launch the browser you generally use; we are demonstrating steps using Google Chrome. Locate and click the three dots icon, then select Settings from the drop-down list.Settings CHrome
  2. Click Privacy & Security, then choose Clear browsing data.Clear cache -ESPN is Asking For TV Provider
  3. For Time range, select All time from drop-down list, and place a checkmark next to Cookies and other site data, & Cached images and files.
  4. Click Clear data.Settings4
  5. Click Extensions from the left pane.
  6. On the next page, click Remove for the unwanted extensions and toggle off the switch next to others to disable them temporarily.Extensions 2
  7. Relaunch your browser and try using ESPN Plus now.

3. Clear the ESPN Plus Cache (mobile devices or TV)

On Android

  1. Launch the Settings app from the home screen.
  2. Go to Apps, then All Apps.ESPN is Asking For TV Provider
  3. Choose ESPN Plus.
  4. Tap Clear Cache to clear the app data.Clear cache

On iOS

  1. Launch the Settings app from the home screen.Settings app - ESPN is Asking For TV Provider
  2. Go to General.General - ESPN is Asking For TV Provider
  3. Locate iPhone Storage.iPhone Storage
  4. Tap ESPN Plus, then choose Offload App.choose Offload App - ESPN is Asking For TV Provider
  5. Tap on the Offload App option again.

On Smart TV

  1. Press the Settings button on the remote control.
  2. Go to Apps, and click the See All Apps option.
  3. Select Clear cache to remove all the app data on your television.
Clear Cache option - ESPN is Asking For TV Provider

Clearing the cache will remove the app data from your device, which can also help you fix the EPSN Plus buffering and freezing.

4. Update the app

On Android/iOS

  1. Open Play Store or App Store.App Store - ESPN is Asking For TV Provider
  2. Tap the Profile icon.Profile icon
    • Android – locate Manage Apps and Devices on Android, then look for Updates Available, click ESPN Plus and tap Update.
    • iOS – Under Available updates, locate ESPN + and click Update if available.

If you have already tried these fixes and ESPN still does not work, check out our full ESPN not working guide for more solutions that cover login, buffering, and account issues.

On Smart TV

  1. Click the Home button on the remote control.
  2. Select Apps, then Google Play Store.
  3. Go to the Updates Available, locate the app, and click Update. You can also click Update all to update all installed apps.

If nothing has worked for you, then the issue could be related to your ESPN account; you must contact ESPN support & inform them about the issue along with steps taken for further assistance.

What is the cheapest way to get ESPN?

Note icon NOTE
Prices listed are subject to change depending upon the market fluctuations, product offers and other factors. We recommend verifying the current prices before making your decision.

Several streaming services offer ESPN Plus with their bundled subscription, including YouTube TV, Hulu, SlingTV, and more. The cheapest is Sling TV, with USD 40 per month and 40 channels. However, if you need more channels, here are other options to explore:

ServicePrice (USD per month)Channels
YouTube TV72.99100+
fubo74.99178+
DirecTV Stream74.9975+
Hulu + Live TV76.9990+

If you want to watch your favorite sports streaming channel, ESPN on Windows, we have a detailed guide for you.

It is essential to check your subscription status & provider credentials before trying anything else. Also, make sure your ESPN app and device used are updated.

If you have questions or suggestions about the subject, feel free to mention them in the comments section below.

Solved: All 4 (Channel 4) Not Working on Smart TV

All 4 is one of the most popular streaming services worldwide, but for many, it’s not working on a smart TV. The problem is encountered across models, be it a Samsung TV, an LG TV, or a TCL Android TV, amongst others, with a different error message for each user. 

The All 4 video on demand service recently rebranded as Channel 4. The two, All 4 and Channel 4, are the same. So any error codes on the latter, too, can be fixed with our solutions!

Why has All 4 stopped working on my TV?

All 4 is known to not work on older models, no matter if it’s a smart TV. Even for global manufacturers like LG, All 4 doesn’t work across models but only on select ones. 

Some updates were also reported to break things. Besides, it could be the corrupt app cache or issues with the network connection to blame. Lastly, even blocking domains to prevent ads results in an error message for some.

How do I fix All 4 (Channel 4) if it’s not working on my Smart TV?

Before we start with the slightly complex solutions, try these quick ones:

  • Restart the TV. Also, disconnect the power cord while it’s turned off and wait for a few minutes.
  • Verify that your device supports the All 4 app. Check the manufacturer’s website for the same.
  • If All 4 is not loading on the smart TV, fix issues with the Internet connection or switch to another network. 
  • Make sure none of the critical All 4 app domains are blocked. Many often block these to prevent ads. So, check the list and remove any that seem related to the streaming service.
  • Identify any downtimes or server outages with the All 4 app. You could use a real-time monitoring service like Downdetector.

If none work, move to the fixes listed next.

Note icon NOTE
The solutions listed here are for an Amazon Fire TV, though the ideas apply to smart TVs and devices, including PCs and mobile phones. Simply execute the equivalent steps on your device, and it should do the job!

1. Get a VPN

The easiest way out is to use a VPN. With it, you will be able to watch Channel 4 worldwide. This will eliminate any of Channel 4’s geo-restrictions. Simply select a UK-based server, and you are good to go! 

And if Channel 4 doesn’t work on a VPN, you are probably running an unreliable solution, or there’s a problem with the account. So, create another All 4 profile.

A professional and reliable VPN solution, such as ExpressVPN can make all the difference when trying to enjoy your favorite Channel 4 shows.

This software comes with many servers all around the world, several of them are located in the UK, so you can pick a preferred location or just let ExpressVPN choose the one with the best connection for you.

EpressVPN

Never miss your Channel 4 shows with this amazing VPN tool.
Check Price Visit Website

2. Clear the app cache

  1. Open your Smart TV Settings, and go to Applications.
  2. Select Manage Installed Applications.manage installed applications
  3. Choose Channel 4 from the list.
  4. Now, select Clear data and then Clear cache.clear data to fix all 4 not working on smart tv
  5. Once done, reboot the smart TV and check whether All 4 is now working.

3. Update your smart TV

  1. Open the smart TV Settings, and go to My Fire TV (this will be different for your device).my fire tv
  2. Locate and select About.
  3. Now, go to Install update, and if one is available, select the option to get the latest software version.install update to fix all 4 not working on smart tv 

4. Update the Channel 4 app

  1. In the smart TV Settings, go to Applications.applications
  2. Choose Appstore from the list.
  3. Now, go to Automatic Updates and set the setting to ON.enable automatic updates to fix all 4 not working on smart tv 
  4. Finally, reboot the device and let it download any available Channel 4 updates. 

Often, updating the app does the trick when All 4 throws an app data error or is not working on a smart TV. This also helps with the Channel 4 4401-network-file error.

5. Reinstall the app

  1. Go to the TV Settings, and select Applications.
  2. Now, go to Manage Installed Applications.manage installed applications
  3. Select Channel 4 from the list.
  4. Scroll down and choose Uninstall.uninstall
  5. Next, choose Confirm to remove the app.
  6. Finally, reinstall Channel 4 from the App Store, whichever one your TV supports.

6. Reset the Smart TV

  1. Access the TV Settings tab, and go to My Fire TV.my fire tv
  2. Now, scroll down to the bottom and select Reset to Factory Defaults.reset to factory defaults to fix all 4 not working on smart tv
  3. Finally, choose Reset when asked to confirm the change.

As a last resort, you can reset the smart TV when All 4 is not working. This especially helps with a Samsung TV, as reported by several users.

7. Contact the support team

When nothing works, it’s best you contact the Channel 4 support team. Besides, we recommend you also get in touch with the smart TV manufacturer in case the problem lies at your end.

For some users, Samsung shared an update that had to be installed via a USB stick. Contact both and see who is able to get rid of the issue. 

Tip icon Tip
While facing a playback problem, you can mostly access Channel 4’s official website just fine. So try that until the support team comes up with a resolution.

Does All 4 (Channel 4) work on all Smart TVs?

No, All 4 doesn’t support all smart TVs or devices. It’s limited to PS4, PS5, XBoxOne, Amazon Fire, Apple TV, Samsung, Roku, YouView, FreeviewPlay, Now TV, Sky, and Virgin Media.

Besides, even for manufacturers that fall in the supported list, a few models might be able to stream videos from Channel 4 and show a black screen instead.

Had All 4 not been working on your Smart TV earlier, it should now stream all the shows without throwing an error. Before you leave, find out how to set up a VPN on a Samsung smart TV. It’s easy and takes practically no time

Besides, did you know it’s possible to capture screenshots on a smart TV? 

For any queries or to share which fix worked for you, drop a comment below.

Solved: Spotify Won’t Play Certain Songs

If you are listening to music with your friends & the jamming session is interrupted by the Spotify can’t play the current song error message, this guide can help!

We will explore the common causes and delve into the WR expert-tested solutions to fix the Spotify won’t play certain songs issue in no time.

Why am I not able to play some songs on Spotify?

  • The content is unavailable in your region, or your Spotify Premium has expired.
  • Outdated app or operating system.
  • Insufficient storage space.
  • Weak internet connection or the Spotify server is down.

What can I do if Spotify is not playing some songs? 

Before we go to the advanced fixes to fix the unavailable songs issue, here are a few preliminary checks you should do:

  • Verify if you have a stable internet connection and check the Spotify server status.
  • Ensure your device’s operating system and drivers are up to date, close unwanted apps & files, and check if you have enough space on your computer.
  • Press Ctrl + Alt + Esc to open Task Manager, locate Spotify, and click End task. Launch the music streaming service, and sign out, then sign in to your Spotify account.
  • Check if the song you want to play is restricted in your region; if yes, try VPN.
  • Ensure your Spotify Premium is active.

1. Edit the hosts file

  1. Press the Windows key, type notepad, and click Run as administrator.Notepad - Spotify Won’t Play Certain Songs
  2. Go to File, then select Open.File - Open
  3. On the Open window, navigate to this path: C:\Windows\System32\drivers\etc
  4. For File type, select All Files from the drop-down menu.
  5. Locate & select the hosts file and click Open.Notepad_hosts
  6. Once you have the file open, you will see a block of text with # in front of every line and might get entries like these, wherein website would be replaced with some website or app name like:
    • 0.0.0.0 website.com
      127.0.0.1 website2.com
  7. Look for entries with Spotify or Fastly in the address. If there are any, add the # in front of the file to comment out or delete it completely.
  8. Press Ctrl + S to save the file, then close it.
  9. Relaunch Spotify and try playing the unavailable song now.

2. Enable the Autoplay feature

  1. Press the Windows key, type spotify, and click Open.spotify, and click Open - Spotify Won’t Play Certain Songs
  2. Go to the app’s top-right corner and select Settings from the drop-down.Settings from the drop-down.
  3. Locate Autoplay, and toggle on the switch to enable it.

3. Turn off the High-Quality Streaming feature

  1. Press the Windows key, type spotify, and click Open.spotify, and click Open - Spotify Won’t Play Certain Songs
  2. Go to the top-right corner of the app and select Settings from the drop-down.Settings from the drop-down. - Spotify Won’t Play Certain Songs
  3. Select Audio Quality, then choose Automatic, Low, Normal, or High from the options.Music Quality, then choose Automatic, Low, Normal, or High

4. Turn off Crossfading & Hardware Acceleration

  1. Press the Windows key, type spotify, and click Open.spotify, and click Open - Spotify Won’t Play Certain Songs
  2. Go to the app’s top-right corner, and select Settings from the drop-down.Settings from the drop-down. - Spotify Won’t Play Certain Songs
  3. Select Show Advanced Settings.
  4. Go to the Playback section, locate the Crossfade songs button, and toggle off the switch next to it.Go to the Playback section, locate the Crossfade songs button, and toggle off the switch next to it
  5. Next, go to Show Advanced Settings and click Compatibility.
  6. Locate Enable Hardware Acceleration and toggle off the switch next to it.Hardware Acceleration
  7. Restart the app.

5. Disable the offline mode

  1. Press the Windows key, type spotify, and click Open.spotify, and click Open - Spotify Won’t Play Certain Songs
  2. Click the three dots icon from the top-left corner, click File, then check if the Offline Mode option is selected.File - Spotify Won’t Play Certain Songs
  3. If yes, then click it to deselect it.

6. Delete the app cache

  1. Press Windows + I to open the Settings app.
  2. Go to Apps, then click Installed apps.Apps - Installed apps -Spotify Won’t Play Certain Songs
  3. Locate the Spotify app, click the three dots, and select Advanced options.Advanced options
  4. Scroll to find the Reset section and click the Reset button.Reset

This action will remove all the app data from your computer. Once done, you need to sign in to your Spotify account, so keep your credentials handy.

7. Allow the app through the Firewall

  1. Press the Windows key, type control panel in the search bar, and click Open.Control Panel start menu - Solved: Spotify Won’t Play Certain Songs
  2. Select Category as View by and click System and Security.System and security - Solved: Spotify Won’t Play Certain Songs
  3. Click Allow an app through Windows Firewall.aLLOW AN APP THROUGH FIREWALL
  4. On the Allowed apps page, click Change settings, then select Allow another app.Change app
  5. Click Browse, select the .exe file of the app and click Add.Browse
  6. Place a checkmark next to Private and Public for Spotify and click OK.

8. Update/reinstall the Spotify app

  1. Press the Windows key, type microsoft store in the search bar, and click Open.spotify, and click Open - Spotify Won’t Play Certain Songs
  2. Click Library, then select Get updates.will display if a new version is available; click Update Now
  3. Locate Spotify and click Update to install the latest version.
  4. Once it is successfully done, restart your computer, then launch the app.

If you face the same error on your mobile devices, you can go to the App Store (iOS) or Play Store (Android), look for the app, and click Update if available to install the new version.

If you still face this issue, try reinstalling the app; follow these steps to do so:

  1. Press Windows + I to open the Settings app.
  2. Go to Apps, then click Installed apps.Apps - Installed apps -Spotify Won’t Play Certain Songs
  3. Locate the Spotify app, click the three dots, and select Uninstall.Uninstall the app
  4. Click Uninstall again to confirm the action.
  5. To reinstall it, press the Windows key, type microsoft store, and click Open.Microsoft Store - Spotify Won’t Play Certain Songs
  6. Type spotify in the search box and press Enter.
  7. Next, click Get or Install to download the desktop app.Installed - Spotify Won’t Play Certain Songs

Reinstalling the app can help you delete the app & install it fresh to remove the glitches, and it can help fix other error messages like Spotify won’t select songs.

How to play a specific song on Spotify without premium?

  1. On your iOS or Android device, launch the Spotify app and tap Search.
  2. Type in the name of your favorite song and look for it. Go to the song and swipe left to save it to the Liked Songs.
  3. Go to Liked Songs, look for the song, then play it.

However, you can’t share it with your friends and listen to it together, as the Remote Group feature works for Spotify Premium accounts.

To conclude, we will leave you with a few takeaways: try playing the song on different platforms to determine if the issue is related to the app or the device.

Also, use the web app on your computer to see if you face the problem; read this guide to learn about the difference between Spotify desktop and the web app.

Did we miss a step that helped you access the greyed-out songs? Feel free to mention it in the comments section below. We will happily add it to the list!

How to Upscale & Enhance Video using VideoProc Converter AI

If you have an old, low-resolution clip that requires a quality boost and enhancement, a dedicated video upscaler software becomes essential. After extensive testing in the WR labs, VideoProc Converter AI impresses all with its exceptional performance.

Most upscaler software used in the market elevate the resolution of a video at the expense of quality preservation, but VideoProc Converter AI, armed with advanced Super Resolution technology, could seamlessly upscale videos of any sort without frame loss or introducing artifacts. In this post, we will walk you through how to upscale and enhance video with simple clicks via VideoProc Converter AI.

How do I upscale & enhance video with VideoProc Converter AI?

As the top video upscaling software, VideoProc Converter AI uses Super Resolution to upscale videos and images to up to 400%, enlarging 360p anime and reality videos to HD/4K without any frame loss or artifacts.

Beyond Super Resolution, it boasts additional AI enhancements like Frame Interpolation and Stabilization to take your video quality to even greater heights. Now free download and install VideoProc Converter AI and follow the steps below to upscale and enhance your videos!

1. Use the Super Resolution tool to upscale the video

  1. On the home page, click the Super Resolution tab
  2. Import the videos you wish to upscale by dragging or clicking the +/Add Media icon. You can add multiple videos at one time.
  3. Choose the output type based on your input video. If your video is an anime video, choose Anime as the type; if your video is a real-world video, choose Reality, and the AI video upscale program will apply the corresponding AI upscaling algorithm.
  4. Choose a Scale option for the output video size. You can choose 2x, 3x, or 4x, representing multiples of the original video size while maintaining the original aspect ratio. The maximum output resolution would be 4K (2160p).
  5. (Optional) you can cut video to upscale only a specific segment and change video codec, audio codec, GOP, and output folder to your liking.
  6. Hit the Run button to upscale your videos using VideoProc Converter AI.

2. Use the Frame Interpolation tool make the playback smoother

  1. Open VideoProc Converter AI and select Frame Interpolation from the menu.
  2. Import your video by clicking on the blue arrow button or dragging it into the app’s designated area.
  3. As you may see in our screenshot, the clip was shot at roughly 30 FPS, but we can enhance the frame rate 5x to 150 FPS. However, we recommend stopping at 120 FPS because most displays won’t show any difference.
  4. Next, if you have a video with scene changes, you should also check the Skip Scene Changes. This prevents adding frames in blank spots caused by scene transitions. You may also tune the sensitivity of the detection process.
  5. Just like with Super Resolution, you may also change the video and audio codecs or select another folder to save to.

The Frame Interpolation feature could intelligently add frames using AI, enhancing the smoothness of your video playback. Gamers can particularly attest to the difference between running a game at 30 FPS vs 120 FPS.

3. Use the Stabilization tool to eliminate shaky movements of the camera

  1. In the main app window, select Stabilization.
  2. Import your video by clicking on the blue arrow button or dragging it into the app’s designated area.
  3. Select the Mode (One or Two pass) and Preset (Best Stability, Fastest, Balanced, or Minimum Crop) from the drop-down menu on the right, and hit the Analyze button. Then the AI-process will run in the background. You can preview the stabilized video after analyzing.
  4. Here we chose a Two pass mode with the Best Stability preset. According to your selection, the analysis will take between a few seconds to a few minutes. A better GPU will speed up the action a lot since the tool has level-3 hardware acceleration for all the new chipsets.
  5. After analyzing the result, you may hit the Run button from the bottom right to make the changes for the whole clip.

When dealing with highly shaky videos, the tool may eliminate frames or crop the image to diminish the shaking effect so watch the preview carefully before applying the stabilization. After a few tries, we chose the Minimum Crop mode instead because it fitted the purpose a lot better for our clip.

Here we conclude our guide on how to upscale and enhance the video using VideoProc Converter AI. We hope that we provided useful information on how to use this tool and improve the video quality of your clips.

Right now, you can benefit from a 52% discount on the Lifetime License of VideoProc Converter AI. You can test the tool right now because VideoProc Converter AI comes with a free trial.

⇒ Get VideoProc Converter AI

This AI video enhancer has a lot more features like digitizing DVDs, converting video and audio to most formats, popular devices, and social media, and downloading video and audio from hundreds of online sources.

Download the tool for free and tell us about your experience in the comments section below.

Sky Mini Box is Not Working: How to Fix it

If your Sky Mini box is not working, you won’t be able to view any TV channels or content, and this can be a big problem since it will ruin your viewing experience.

Luckily, this is usually a minor issue, and it can be fixed in a matter of minutes, so today, we’ll show you the best solutions that you can use to address it.

Why is my Sky Mini box not working?

  • Temporary glitches can cause problems with the Sky Q Mini box.
  • Your device is not using a standard resolution.
  • Connectivity issues and Internet connection problems can interfere with your device.

How do I get my Sky box to work again?

1. Disconnect the Sky box from the power outlet

  1. Turn the device off by pressing the Standby button.
  2. Now, disconnect the power cable from the power source. You can also disconnect the HDMI cable.
  3. Keep it like that for about a minute or two.
  4. Connect the electrical cable again and start the device.

It might take up to 5 minutes for the device to fully boot and for all features to return.

2. Force it to use the standard resolution

  1. Make sure that your Sky box is running.
  2. On your remote, press Home 1 0 8 0 Home.
  3. Check if the problem is resolved.

This will force the device to use standard resolution and help if you get a No signal message.

3. Perform a network reset

  1. On Mini Home, navigate to Settings.
  2. Select Setup and choose Network.
  3. Once Network settings open, select Reset button on the right side.
  4. Follow the instructions on the screen to restore wireless connection settings to default.
  5. This will restore the default settings for your network and reset your IP address configuration.

If the Sky Mini box is not working after a power cut or you’re getting a red light, that’s most likely a temporary glitch that can be fixed with a quick power reset or resetting your network connection. Alternatively, you can use an Ethernet cable for direct connection and check if that solves the issue.

Speaking of connectivity issues, using a weak internet could also cause issues like Sky Mini error code MR106; read this guide to learn more about it.

Sadly, Sky is prone to issues, and we already wrote about Sky Go being unable to load configuration and Sky Go error codes 4253024421 & 1415. A few users even reported that Sky Go is blocking IPTV, but we managed to fix it in a separate guide.

Sometimes, the remote works but the volume or other keys refuse to respond. In such cases, this in-depth Sky remote volume button fix explains the best steps to restore functionality.

Did you find a different way to fix this issue? If so, don’t hesitate to share it with us in the comments section.

Disney Plus No Valid Bitrates Error: How to Quickly Fix it

When streaming content on Disney Plus and you notice playback issues, you’re likely experiencing the no valid bitrates error. 

A bitrate that is too low will result in poor quality video and audio, but too high a bitrate can cause problems with streaming, so you need to achieve a balance. 

What does no valid bitrate mean?

A video encoded with a bitrate below or above the acceptable level will have no valid bitrate and may not play. 

When this happens, it could mean the original source was encoded at too high or too low a bitrate on film but later converted to digital. The new video format then becomes incompatible with your current bandwidth limits.

How do I fix the Disney Plus No Valid Bitrates Error?

  • Ensure your Disney Plus app is up-to-date.
  • Verify there are no scheduled maintenance or downtimes on Disney Plus.
  • Check your Internet speeds and switch to an Ethernet cable for a more stable connection.
  • Restart your app and devices.

1. Adjust your streaming resolution

Disney Plus allows you to stream content in three modes: Automatic, Moderate, and Save Data. The Automatic mode is the default one, which streams content in 4K quality, Moderate in HD, and Save Data in the lowest quality.

With the no valid bitrates error, you may be trying to stream a movie in 4K resolution, but your device doesn’t have enough bandwidth or processing power to play it smoothly. You can play with these settings until you get an uninterrupted streaming experience.

2. Resolve your connectivity issues

A myriad of connection problems could be why you’re facing the no valid bitrates error on Disney Plus. To cover all the bases, ensure you have not set bandwidth limits, and check with your ISP to verify there are no caps on your Internet speeds.

To boost your speeds, disconnect bandwidth-hogging devices from your connection, power cycle your router, update its firmware, and reset it where applicable.

In other cases, enable/disable your VPN connection, especially when trying to access content from an unauthorized location, lest you run into the protected license error. For extreme situations, reset your network connection or replace your router if it’s old and causes issues with streaming.

3. Update your Roku device software

  1. Press the Home button on your Roku remote.
  2. Scroll down and select Settings.
  3. Click on System.
  4. Select System Update.
  5. Click on Check now for available updates.

4. Reset your device

If you have recently updated your software or installed certain apps, then it is possible that there was a conflict between them and the existing software on your device. Windows devices, browsers, and Roku are easier to reset through their settings.

If you are using an older model TV model, turn it off by unplugging it from power for 30 seconds and then plugging it back in again. Wait for about 5 minutes before turning it back on again.

5. Reinstall Disney Plus

If the above steps didn’t fix the problem, reinstalling Disney Plus might do the trick. Uninstallation will vary depending on your device, but for Windows, go to Settings > Apps>Apps & features>Find Disney+ and tap Uninstall.

Ensure you clear residual files, then go back to your app store and download it again.

6. Use a different streaming device

You can also use a different device to verify whether the problem lies with your device or Disney Plus’ servers. Disney Plus is supported on various devices such as Xbox, Roku TV, and web browsers.

As a matter of fact, you can try one of the browsers recommended for streaming if you’re looking for an enhanced experience.

After trying out different platforms and you get this error on both devices, it’s likely that Disney is having server issues and it’s not a device-specific bug.

7. Contact customer support

If you’ve already tried everything and still can’t get your video to play, you will need further assistance. Unfortunately, there are some issues that only the Disney Plus team can resolve.

And while you may have found an answer to the no valid bitrates error, there are still many other Disney Plus errors you may encounter. Luckily, we uncover most of them and give you top-tested solutions.

These steps are easy to implement and should work to resolve your issue. Give them all a try if needed, then report back to us with the results.

EE Error 0: Can’t Send Message [Fix Guide]

EE error 0 will prevent you from sending messages to your friends, and this can be a problem. However, there are a few solutions that you can try.

What does EE error code 0 mean?

This issue appears when you select the wrong service provider or have an incorrect default messaging app, usually the one from Google. Reaching the message or character limit can also give this error.

How do I fix the EE error 0?

Before we try more complex solutions, restart your phone and clean your SIM card. Also, ensure that EE servers are working and that you’re not exceeding any limits. Verifying your contact details or adding a contact again can help with this error.

1. Uninstall the other messaging app

  1. Open the Settings on your Android device, and select Apps. apps
  2. Locate any other messaging apps apart from the built-in default one and select it. This could be Google Messages. You could also identify the additional ones from the app icon.message
  3. Now, tap on Uninstall.uninstall to fix ee error 0
  4. Tap OK in the confirmation prompt.

2. Change the default messaging app

  1. Open the Android Settings, and go to Apps.
  2. Tap on the ellipsis (three-dot icon) near the top-right corner.
  3. Select Default apps.default apps
  4. Choose SMS app.sms app
  5. Finally, select Messages, one with the bubble and three dots in between.messages to fix ee error 0

Setting the correct default messaging app will do the trick if you get EE error 0. It also helps with the T-Mobile error 2.

3. Set the correct SMSC number

  1. Open the default Messages app, tap on the ellipsis and select Settings.settings
  2. Now, choose SMSC from the list of options.smsc
  3. Enter +447958879879 in the text field, and tap OK.change to fix ee error 0
  4. Once done, reboot the Android device and check for improvements.

Changing the SMSC (message center) number helps with O2 error 38.

4. Change the SMS settings

Note icon NOTE
This solution only applies when using Google Messages as the default app. If not, head to the next fix.
  1. Open the Google Messages app, tap on the profile icon near the top right, and select Messages settings.
  2. Choose Chat features.messages settings
  3. Enable the toggle for Automatically resent as text (SMS/MMS).
  4. Try resending the messages and verify whether you still get EE error 0 on Samsung.

5. Clear the message app cache

  1. Open the Settings on your Android phone, and go to Apps.apps
  2. Select Messages from the list.
  3. Tap on Storage.storage
  4. First, tap Clear data and then on Clear cache to delete both.clear cache to fix ee error 0
  5. Finally, check for improvements. 

6. Reset the network settings

  1. Open the Android Settings and tap on General Management. general management
  2. Tap on Reset.reset
  3. Now, select Reset network settings.reset network settings to fix ee error 0
  4. Finally, tap the Reset settings button to confirm.reset settings to fix ee error 0

If faced with the EE error 0 SMS issue, resetting the network settings should help, as when users encountered T-Mobile error 111.

7. Contact the EE support

When nothing else works, you can always contact EE support. They will identify and do it for you if critical settings need to be changed or the SIM card replaced.

Trivial problems are mostly resolved over a phone call, while for complex issues, especially with the hardware, you will need to visit their store.

But rest assured, by the time you finish our guide, the EE error 0 should be gone for good! A similar Vodafone error 69 SMS issue is also encountered by users in the UK and across the globe.

Besides, it’s not just the network provider to blame. Many have trouble when Viber says, the message isn’t delivered.

Speaking of issues with messages, we have a guide on RTT randomly turning on, so you might want to check it out.

For any queries or to share what worked for you, comment below.

VideoProc Converter AI – Using AI to Enhance Video Quality

Digiarty Software released VideoProc Converter AI, bringing 3 new AI tools: Super Resolution, Frame Interpolation, and Stabilization to enhance video/image quality.

This major update makes VideoProc Converter evolve into VideoProc Converter AI, an AI-driven video enhancer and converter. In this article, we will talk about its new features and how to use them to boost the quality of your video.

What is VideoProc Converter AI? VideoProc Converter AI is a multi-tool software that helps you enhance low-resolution videos & photos and increase their FPS, convert large/4K/HD/DVD video, edit, compress, download, and record with GPU acceleration.

System requirements for the new AI tools:

  • Windows OS: Microsoft Windows 7/8/8.1/10/11 or later (32-bit and 64-bit versions supported)
  • Hard Disk Space: 1GB
  • RAM: 2GB (Minimum)
  • Graphic: Make sure that your graphic card is compatible with Vulkan1.2.x or later.

What are the best features of VideoProc Converter AI?

1. Super Resolution

The Super Resolution feature of the new VideoProc Converter AI is simply spectacular. Not only that it can upscale a video to 4x the resolution, but it also enhances the image quality tremendously.

We tested the tool on a flimsy 360×640 pixels video shot with an ancient smartphone, and, as you can see in the screenshot, VideoProc Converter AI’s Super Resolution tool brought it up to 1440×2560 pixels.

We checked the Use High Quality Engine option, and that visibly sharpened the image.

The tool is extremely easy to use. First, drag and drop the video into the designated area. Then select the desired upscaling multiplication factor (2x, 3x, or 4x). La check if you want to enhance the image, and hit the Run button.

2. Frame Interpolation

Frame Interpolation is another new feature from VideoProc Converter AI that will help you enhance the video image quality.

The tool boosts the frame frequency by interpolating additional frames and improving the fluency of the playback.

We used a clip with 30 FPS, bringing it to a smooth 150 FPS by selecting the 5x interpolation factor. We recommend stopping at 120 FPS. Most displays won’t be able to play a higher frame density and you won’t see the difference.

Another smart feature of Frame Interpolation is skipping the scene changes. If you check the option in the UI, the tool will detect and avoid those parts.

3. Stabilization

Most cameras have a stabilization feature. However, it’s never enough and if you’re not using a tripod, your video is going to be shaky at best.

The AI Stabilization tool from VideoProc Converter AI analyzes and eliminates these unwanted shaky effects, whether you’re using a GoPro, phone, drone, or handheld camera.

And it does that with GPU-accelerated speed, controllable cropping ratios, and precise fine-tuning.

The tool offers four presets: Best Stability, Fastest, Balanced, and Minimum Crop. And it also allows you to change Border Color and Crop Type.

From our tests, after a 2-pass stabilization and Best Stability preset, the video was playing smoothly as if the camera was mounted on a professional gimbal.

More VideoProc Converter AI important features

VideoProc Converter AI has its roots in file conversion so it has a lot of other features:

  • Video & audio converter – The software is one of the best and fastest video and converters you can get right now, handling videos of up to 8K with lightning speed thanks to the level-3 hardware acceleration. It also converts audio and has dedicated presets for popular devices and social media.
  • DVD digitizing – Convert any DVD to a digital format including MP4, AVI, multi-track MKV, MP3, and ISO.
  • Downloader – Get music and video from hundreds of online sources just by inserting a link in the tool.
  • Multi-source recorder – Record anything that goes on anywhere on your screen or on your webcam at the same time.

How much do I pay for VideoProc Converter AI?

There are three paid plans for VideoProc Converter AI:

  • Premium 365 – Includes a 1 yr subscription for 3 PCs for $38.90
  • Lifetime License – Lifetime license for 1 PC for $78.90
  • Family License – Offers a lifetime license for 3-5 PCs for $119.90

Right now, there is a special Anniversary offer with a 52% discount for the Lifetime License, so, if you hurry up, you will get it for $45.95 instead of $78.90 for a full year.

You should also know that VideoProc Converter AI also comes with a free trial version so you can test it. There is also a 30-day money-back guaranteed policy.

⇒ Get VideoProc Converter AI

VideoProc Converter AI comes to peaks Level-3 Hardware Acceleration fully powered by Intel, AMD, NVIDIA GPUs, and Apple M1/M2 (Pro/Max/Ultra). That’s how it can deliver smooth (4K/8K) video editing and transcoding without any quality loss.

To summarise our article, this AI video enhancer will help you increase video quality with just a few clicks by using the new tools. Super Resolution dramatically increases the resolution of your clips, while Frame Interpolation and Stabilization will make them play smoothly and without any annoying shakes.

We recommend trying the new VideoProc Converter AI and telling us all about your experience in the comments section below.

Pokemon Home Error Code 400: How to Fix it

If you encounter Pokemon Home error code 400, you won’t be able to trade or move Pokemon, and in some instances, you won’t be able to start the app.

This is a problem if you rely heavily on the app, so in this guide, we’ll explore several ways you can use to fix this problem so let’s get started.

What is Error Code 400?

  • This error message occurs due to issues with your network connection.
  • Cache issues or corrupted installation can also cause this problem to occur.

How do I fix Pokemon Home error code 400?

1. Switch to mobile connection

  1. Open the top menu on your phone and turn off Wi-Fi.
  2. Next, enable Mobile data.
  3. Try to start the app again.

2. Clear the app cache

  1. Tap and hold the Pokemon Home icon. Select App info.
  2. Next, head to Storage.
  3. After that, tap on Clear cache and check if the problem is gone.
  4. If not, repeat the same steps but this time choose Clear data.
  5. Tap on Delete to confirm.

Clearing the app data can help you fix other Pokemon game issues on Android, like error code 10104 on Pokemon Masters; read this guide to learn more.

3. Reinstall the app

  1. Press and hold the Pokemon Home icon.
  2. Choose Uninstall.
  3. When the confirmation dialog appears, tap OK.
  4. Search for Pokemon Home.
     
  5. Tap on Install next to Pokemon Home and wait for the app to install.
  6. Once installed, start it again and check if it works.

Pokemon Home communication error code 400 is a simple problem that can appear on your Android device, but it can be fixed by clearing the cache or by reinstalling the app. A server issue can also throw error 504 but it’s nothing you can’t handle.

If you’re a fan of Pokemon, did you know you can play Pokemon Go on Windows? If you prefer different kinds of games, you can also play online Pokemon games.

In case you experience any problems, we have a great guide that can help you fix Pokemon Showdown if it’s not working. If you’re a fan of TCG, then our guide on Pokemon TCG Live error 10099 should help you fix problems with the game.

For broader troubleshooting beyond specific error codes, see our Pokémon TCG Not Working guide.

Before you leave, check out our latest guide on Pokemon HOME error code 10015 for more information.

Did you fix this error on your own? If you have found a different solution, feel free to share it with us in the comments.

Fix: We Can’t Verify Your Email Now Hulu Error

When Hulu is unable to verify the email address associated with your account, you’ll get a We can’t verify email now error message at the login phase.

It can be frustrating but once you verify your credentials, everything should return to normalcy. However, if that doesn’t do it, we have more tricks up our sleeves.

Why does Hulu keep saying we can’t verify your email now?

If you’ve been using an old or invalid email address or entered the wrong login credentials, Hulu may be unable to verify your identity.

In addition, if you’re trying to sign up from a geo-restricted location, you may also encounter this error. And if you try to verify too many times, your account may be blocked.

How do I fix the We can’t verify your email now Hulu error?

Check off the following basic troubleshooting steps first:

  • Double-check that you’re entering the correct email address and ensure there are no typos or strange characters.
  • Ensure your internet speeds are optimal, then switch from a wireless connection to a wired one.
  • Ensure your Hulu app is up-to-date as well your browser if on the web version.
  • Verify the server status of Hulu for any outages or downtimes.
  • Ensure you’ve not exceeded the maximum device limit.

1. Reset your password

You can force Hulu to verify your email by clicking the Forgot password option on the login page to force a password reset. This will prompt a verification code to be sent to your email.

Verify your email by clicking on the link Hulu sent you. If you don’t see this email, check your spam folder, enter the verification code, and follow the prompts to regain access to your account. If possible, try logging in from another device or browser.

2. Resolve Internet connection errors

Login issues are sometimes related to Hulu’s network error, so you first need to ensure you have a stable internet connection to have a seamless login process. You can start by power cycling your router, updating your network card drivers, and resetting your connection.

Also, ensure the home network registered on your account matches your connection otherwise, you’ll get the Hulu is unable to verify your home location error, and you’ll be locked out of your account.

If your connection is okay, perhaps the is Hulu app not working due to server issues, and you’ll have to wait for that to be fixed first.

3. Use a VPN

  1. Press the Windows key + I.
  2. Next, navigate to Network & internet in the left menu and click on VPN in the right pane.
     
  3. Click on Add VPN to start the manual setup.
  4. Enter your VPN settings, such as encryption type, server IP address, and other connection options, and click on Save.

You can accomplish this task with a professional VPN solution. For instance, ExpressVPN is much more secure and efficient than the Windows native solution.

This software offers numerous servers located in 105 countries, and you can always find one that will suit your needs and continue to watch Hulu unhinged.

⇒ Get ExpressVPN Here

4. Clear browser cache

  1. Click the three horizontal dots and select Settings.Settings CHrome
  2. Launch your browser, and for this step, we shall be using Google Chrome.
  3. Go to Privacy and security and click Clear browsing data.
  4. Select Browsing history, Cookies and other site data, & Cached images and files, then click Clear data.

If you’re using other streaming devices like your Android phone, proceed to clear the cache as well.

5. Remove devices from your Hulu account

  1. Launch the Hulu app on another logged-in device if available.
  2. Navigate to Your Account>Watch Hulu on Your Devices>Manage Devices.
  3. In the pop-up screen that appears, select your device and click Remove. Repeat this step until you only remain with the current device you’re on.

Removing connected devices can help you fix the issue, especially if you’re getting We encountered an error when switching profiles on Hulu message.

6. Contact customer support

If all else fails, contact customer support via phone or online chat and let them know about the issue so they can help fix the problem for you.

You may not be able to verify your email address because it has been compromised, shared with others who are not authorized users on your account, or you just don’t remember the original email used to sign up.

Hulu may be able to help you with your account recovery, especially if your payment method for your subscription is via a third-party service.

Hopefully, this article gives you some ideas on how to fix Hulu’s email verification problem. Let us know in the comments if any of these work or if there are other methods you’ve used to fix this error.

Solved: 4401-Network-File Error on Channel 4

If you’re trying to watch Channel 4, but receive the 4401-network-file error, keep reading. We’ll help you sort it out.

The Channel 4 error highlights the app’s inability to connect with the servers and playback the requested content. Find below what you can do to get it fixed.

How do I fix Channel 4’s (All 4) 4401-network-file error?

Start by rebooting your device and verifying your internet connection. Also, make sure the Channel 4 servers are up and running. You could use Downdetector for that.

If none work, head to the fixes listed next.

Note icon NOTE
The steps listed here are for Amazon Fire TV, though the idea remains the same across streaming devices. If you use another one, follow the equivalent steps, and things should be up and running.

1. Use a VPN

  1. Download and install a reliable VPN with servers in the UK. Our top choice here is ExpressVPN because it’s fast, reliable and has great local coverage.installing expressvpn
  2. Open the app, and click on the ellipsis to open the server list.
  3. Locate the United Kingdom, pick a city, and connect
  1. Once the connection is up and running, go back to channel 4 and try again.
    ExpressVPN

    ExpressVPN

    Don’t let errors interrupt you from watching Channel 4 with this powerful VPN solution.
    Free Trial Visit Website

    2. Clear the app data

    1. Open the streaming device, go to Settings, and select Applications.application
    2. Now, choose Manage Installed Applications.manage installed applications
    3. Scroll down and select Channel 4 from the list.
    4. Finally, choose Clear data and then Clear cache to delete all the app files. If prompted with a confirmation box, choose the appropriate response.clear data to fix channel 4 4401-network-file

    3. Reinstall the app

    1. On the streaming service, go to Settings, and select Applications.
    2. Select Manage Installed Applications.manage installed applications
    3. Locate and choose Channel 4 from the list.
    4. Now, select Uninstall.uninstall to fix channel 4 4401-network-file
    5. Finally, choose Confirm to start the process.
    6. Once the app is uninstalled, download Channel 4 again from the app store.

    4. Access Channel 4 through the official website

    When you get the Channel 4 error 4401, the problem could be limited to the smart device. In most cases, when this happened, the official Channel 4 website worked fine. So, connect to it and watch your favourite shows!

    Besides, you could use a mobile device, an iPad, or a PC. Try out the different options until one works! 

    5. Contact Channel 4 support

    If nothing else works, you can always contact Channel 4 support. The team will inform you of any server outages or similar issues triggering the playback error. 

    And if it indeed is a problem at their end, wait for a while. Things like these are usually fixed within hours, or at a max, a day.

    One of these solutions will surely fix the Channel 4 4401-network-file error. Besides, if it’s a network connection to blame, it’s best that you contact the Internet service provider for a resolution.

    In the unlikely scenario that it turns out to be a geo-restriction error, you can look at our solutions to watch Channel 4 worldwide!

    For any queries or to share what worked for you, drop a comment below.

    Hulu Webpage Not Available: How to Fix This Error

    If you ever find yourself on the Hulu website and get the This webpage isn’t available error, below are a few ways to avoid this issue.

    In addition, we offer tips to reduce the chances of such errors occurring in the future so that you can get the most out of this streaming app.

    Why is Hulu saying the web page is not available?

    If the website gets too much traffic at once or there is a server-related problem, you may get this error. Your internet service provider might also be experiencing issues with their servers or network infrastructure, causing your connection to be unstable and unable to load websites properly.

    How do I fix the Hulu webpage not available error?

    Start with the following basic troubleshooting steps:

    • Check your internet connection speeds for any instability and switch to an Ethernet cable where applicable.
    • Check Hulu’s website status for maintenance or temporary outages.
    • Close all open browser windows, then refresh your browser or restart it.
    • If you don’t see any improvement, try updating your Hulu app or browser.
    • Switch to incognito mode, another browser, computer, or device and see if that helps resolve the problem.
    • Disconnect other devices from your connection that may be hogging the bandwidth and power cycle your router.

    1. Clear cache

    1.1 Android app cache

    1. Tap on settings on your phone.
    2. Next, tap on Apps.
    3. Find the Hulu app and tap on it.
    4. Scroll down and select Storage.
    5. Tap on Clear data and Clear cache, then try again.

    1.2 Android TV cache

    1. On your TV, find your Settings.
    2. Go to Apps and select Hulu.
    3. Scroll down and hit Clear data and Clear cache.

    1.3 Browser cache

    1. Click the three horizontal dots and select Settings.Settings CHrome
    2. Launch your browser, and for this step, we shall be using Google Chrome.
    3. Go to Privacy and security and click Clear browsing data.
    4. Select Browsing history, Cookies and other site data, & Cached images and files, then click Clear data.

    2. Deactivate and reactivate your device on the account

    1. Launch the Hulu app.
    2. Navigate to Your Account>Watch Hulu on Your Devices>Manage Devices.
    3. In the pop-up screen that appears, select your device and click Remove.
    4. Next, repeat steps 1-2, click on Add device then wait for a unique code to reactivate it.

    3. Update your TV’s firmware

    1. For this solution, we shall be using the TCL model.
    2. On your TV, find your Settings.
    3. Go to System.
    4. Click on About then select Software update.
    5. Select Network update and click on System update.
    6. Now click on Check Update. Your system will scan for any available updates.
    7. You’ll either start downloading updates or get a message that your TV is already up to date.

    4. Temporarily disable your firewall

    1. Hit the Start menu icon, type Windows Security in the search bar and click Open.
    2. Click on Firewall & network protection, then select Public network.league of legends black screen after champion select
    3. Locate Microsoft Defender Firewall and toggle the off button.turning off Microsoft Defender Firewall Windows

    If you’re getting the webpage not available on Hulu because your firewall is blocking it, you may want to allow the app or browser as an exception to prevent such errors.

    5. Disable browser extensions

    1. Launch your Chrome browser, and in a new tab, enter the following address:chrome://extensions/
    2. Peruse through your extensions and toggle the Disable button for any suspicious-looking ones.
    3. Repeat this step until you find the culprit.

    6. Enable/Disable your VPN 

    1. Press the Windows key and select Settings.settings windows 11
    2. Next, select Network & internet and click on VPN in the right-side menu.
    3. Select the VPN connection you want to disable, click on the drop-down and select Remove.remove VPN

    Depending on your location, you may have to use a VPN because Hulu is unavailable in certain countries.

    7. Disable your Proxy 

    1. Press the Start Menu icon and select Settings.settings windows 11
    2. Click on Network & Internet on the left pane, then scroll down and click Proxy on the right pane.Network proxy settings
    3. Select Edit next to Use a proxy server option in the Manual proxy setup section, toggle off Use a proxy server and click on Save.Disable proxy server

    What are some preventative measures to reduce such future errors?

    • Check your settings menu regularly – Some firewalls and antiviruses, when updated, can block sites like Hulu, and cause connectivity issues. Other settings include checking the proxy settings, sometimes left on by accident when using a public network.
    • Ensure you have adequate Internet speeds for streaming – Streaming content can be frustrating if your Internet connection isn’t good enough. If you’ve set bandwidth limits, try to reduce the quality of the stream to reduce the occurrence of Hulu network errors.
    • Use a reliable ISP – Your internet provider plays a significant role in your connection because it influences the quality of your connection. If they are experiencing any issues with their service frequently, this could cause an interruption in your ability to connect with Hulu.
    • Update your software regularly – Keep your Hulu app, browser, phone OS, and Windows updated as soon as updates are available to avoid Hulu playback errors.
    • Use the app instead of browsers – While streaming browsers are exciting, especially for people with low storage issues, not every site will work perfectly.

    So there you have it. Another handy tutorial. Hopefully, the next time this happens, you won’t get so frustrated.

    Have you used any of the solutions above and were successful? We’d love your feedback so drop us a comment below.

    Solved: Sky On Demand is Not Working

    If you are experiencing issues while watching your favorite shows on Sky on Demand, or if the device is not working at all, this guide can help!

    We will discuss the common reasons and explore practical solutions to fix the issue so you can watch your favorite content without interruption.

    Why is Sky on Demand not working?

    • Weak internet connection.
    • The Sky Box software doesn’t match the hardware version.
    • The content you want to watch doesn’t come under your subscription.

    How do I fix the Sky on Demand not working issue?

    Before proceeding with any steps to get rid of the Sky on Demand error messages, go through the following preliminary checks:

    • Ensure all the cables are correctly connected.
    • Remove the router from the power source, plug out all the cables, wait for a few minutes, and then plug your internet router into a power outlet to power cycle it. This step can also avoid other standard connection issues like Sky Go error code 4253024421.
    • Verify if you have an active subscription to Sky on Demand services.
    • Check the expiration date for the on-demand content before trying anything else.

    1. Reboot the Sky box

    1. Press the Standby button on your Sky remote and hold it. Don’t let go of it until the command light turns on and starts flashing.Press the Standby button - Sky On Demand is Not Working
    2. Wait for a few seconds, and the red light will appear. Remove the ethernet cable, then plug it back in.
    3. Now press the Sky button on the remote control.
    4. Again, wait a few minutes, then turn it back on. Soon, the green light will appear on the box, indicating that the device is working.

    Rebooting the Sky Q and Mini device can help you fix the error code MR106 issue; read this to learn more about it.

    2. Update the software version

    1. Press the Home button on the Sky remote.Press the Home button on the Sky remote -Sky On Demand is Not Working
    2. Click Settings, then System Info.
    3. Note down the Hardware and Software version. Go to the Sky hardware and software versions website to check the latest version. Ensure the software version matches the hardware version.

    If they don’t match, you need to update the software; follow these steps to do so:

    1. Again, go to Settings, then System Info.
    2. Locate the Software version, then select Setup.Software version - Sky On Demand is Not Working
    3. Choose Software Download to initiate the downloading process.Update software Sky On Demand is Not Working
    4. You will get the Software update in progress message; don’t turn off your Sky box. Once it is downloaded, press the Standby button on the Sky remote to turn off the box.
    5. Once the Sky box restarts, wait for the on-screen instructions to disappear, press the Home button on the remote control, go to Settings, and then System Info to check the version.

    3. Check the network connection

    1. Press the Home button on your Sky remote control.Press the Home button on the Sky remote - Sky On Demand is Not Working
    2. Go to Settings, then select Status.
    3. Next, click Network connection, then select Network setup.
    4. Ensure the Connection to broadband router and Connection to internet options are selected.Connection to broadband router and Connection to internet options  - Sky On Demand is Not Working

    You can also press the WPS button on your router to reset it and ensure you don’t have problems like Sky Go is unable to load configuration due to weak internet connectivity.

    4. Pause and resume the download

    1. Press the Home button on your Sky remote control.Press the Home button on the Sky remote - Sky On Demand is Not Working
    2. Go to Recordings and select Manage.
    3. Click Downloading, and select Pause queue.
    4. Now, to resume downloading the content, click Resume queue.

    5. Reset settings on the Sky box

    1. Press the Home button on your Sky remote.
    2. Navigate to Settings, but don’t select it; press 0,0,1 on your remote, then press Select.
    3. Choose Reset, then click Reset settings, then select Confirm.Reset - Reset Settings - Sky On Demand is Not Working
    4. Wait for the on-screen instructions to disappear, and press the Standby button to complete.

    If none of the troubleshooting tricks worked for you, you should contact Sky Box customer support for further help.

    You must have a stable internet connection and the appropriate subscription plan to ensure you don’t encounter issues while using Sky on Demand.

    If you are using Sky broadband and want to prevent internet service providers from blocking IPTV, use a VPN; for more solutions, read this guide.

    If you have any questions or suggestions about the subject, please mention them in the comments section below.

    Fix: Not Registered on Network Error

    While Vodafone remains one of the popular international operators, issues like Not registered on network can render the device unusable from the mobile network’s point of view. You won’t be able to make calls, send or receive texts, or access mobile data.

    The error message appears when making calls and is usually encountered on an Android device, commonly the Samsung Galaxy series. It may appear due to a problem at your end or a network issue.  

    Why does my Vodafone number say Not registered on network?

    When your Vodafone sim says Not registered on network, you could be in a different country and have to manually select the operator. In the case of roaming, you must enable the functionality and be on a supported plan.

    Misconfigured network settings are known to commonly trigger the error. We also saw cases where a blocked IMEI number resulted in the message. Besides, we can never rule out hardware issues, especially with the SIM tray.

    How do I fix the Not registered on network error on my phone?

    Before we start with the slightly complex solutions, try these quick ones first:

    • Turn the Airplane Mode on, wait for 30 seconds, and then turn it off. 
    • Restart the mobile phone. Also, take out the SIM card, wipe it, and then put it back in. While doing so, blow gently into the SIM slot to clear any dust accumulation.
    • Check for pending software updates and install them.
    • Change the network type in mobile settings. If you are on 5G, switch to 4G or 3G. 
    • Connect the SIM card to another phone and verify whether it works. If it does, the problem lies with the earlier device. In case it doesn’t, the SIM or network provider is at fault.

    If none work, head to the fixes listed next.

    1. Enable Roaming services

    1. Open the Settings on your Android mobile phone, and go to Connections.connections
    2. Tap on Mobile networks.mobile networks to fix vodafone not registered on network
    3. Enable the toggle for Data roaming.enable roaming

    If you are getting Vodafone Not registered on network error while roaming, make sure a relevant pack that supports roaming services is activated and your network provider’s account has sufficient balance.

    Besides, it’s important that Vodafone has partnered with a local network carrier to deliver calling, data, and text services. Verify this through the support team.

    2. Clear the SIM toolkit cache

    1. Launch Settings, scroll down, and tap on Apps.apps
    2. Locate and select SIM toolkit.
    3. Tap on Storage.storage
    4. First, tap on Clear data and then on Clear cache.clear cache to fix vodafone not registered on network
    5. Once done, restart your Android device and check for improvements.  

    3. Manually select the network operator

    1. Open your Android Settings, and select Connections.connections
    2. Tap on Mobile networks.
    3.  Choose Network operators.network operators
    4. Now, tap on Select manually and wait for the device to scan for all available networks.select manually to fix vodafone not registered on network
    5. Once it presents the list, select another network.
    6. If the problem remains unresolved, select another entry from the list. You may have to repeat it a few times until the correct carrier is selected.

    4. Reset the network settings

    1. In your phone Settings, go to General management.general management
    2. Tap on Reset.
    3. Select Reset network settings.reset network settings to fix vodafone not registered on network
    4. Now, tap on Reset settings to confirm the change.

    When the network settings are misconfigured, a reset becomes imperative to fix the SIM card Not registered on network error in Vodafone. This also helps with Vodafone SMS Error 69.

    5. Check for a blocked IMEI number

    Often, when you buy an old phone, there’s a chance that the IMEI number is blocked. This is especially true for devices that were stolen. Also, network operators may block devices with unpaid bills.

    To check for a blocked IMEI number, dial *#06#, and if it shows anything other than listing the IMEI number(s), there’s some misconfiguration or issue. And it’s best that you contact the phone manufacturer. Some websites also help verify IMEI blocking, so you may use one.

    6. Check the APN settings

    1. Open the Android phone’s Settings, and go to Connections.connections
    2. Tap on Mobile networks.
    3. Select Access Point Names.access point names
    4. Choose the currently configured APN.APN
    5. Verify that the details listed here are correct. If you are unsure, cross-check the APN settings with another device on the same network operator or check the web.
    6. In case this doesn’t work, go back to the previous screen, tap on the ellipsis (three-dot icon) near the top right, and select Reset to default.reset to default to fix vodafone not registered on network 

    APN or Access Point Names are critical from the network connection point of view, and issues with these can trigger the Vodafone Not registered on network error. Reconfiguring the APN settings also helps when IPTV is not working.

    7. Contact Vodafone support

    When nothing else works, the last option is to contact Vodafone support to solve the network error. In India, you can contact Vodafone Idea through the MyVI website.

    Whether it’s a damaged SIM card or issues at the network carrier’s end, only the support team will be able to help. Often, replacing the SIM did the trick for users!

    For anyone wondering how to fix the Not registered on network error in Vodafone or any other network, the troubleshooting remains pretty much the same. Check for roaming packs, manually select the carrier, or verify whether the IMEI number is blocked.

    If you believe in the idea of unhindered Internet access and have a VPN running, find out whether VPNs can mess up your phone. There’s a lot to learn!

    For any queries or to share which solution worked for you, drop a comment below.

    Solved: LG TV Keeps Switching Inputs

    If your LG TV keeps switching inputs when watching your favorite shows or movies, it can spoil the viewing experience.

    In this guide, we will discuss the common reasons for the issue and delve into effective solutions to fix the problem in no time.

    Why does my LG TV keep switching inputs by itself?

    • Auto Input Detection feature is enabled.
    • App cache or glitch in an app.
    • The Quick Start mode is enabled.
    • Faulty hardware.

    How do I fix the LG TV keeps switching inputs by itself issue?

    Before proceeding with any detailed steps to fix the switching inputs issue on LG TV, go through the following preliminary checks:

    • If you experience this issue after power fluctuation, use a power surge protector and move the wireless infrared devices away from the television.
    • Check the HDMI cables for damage and replace them if needed. Also, ensure all the cables are correctly connected.
    • If multiple devices are connected to your TV, try placing the remotes in different locations or use a universal remote instead.
    • Ensure the batteries of your remote are working; remove them from the remote and clean them just to be sure.

    1. Power Cycle your TV

    1. Unplug the power cable of your TV and the power outlet.
    2. Press & hold the Power button on your TV for 15-20 seconds.
    3. Wait for a minute, then plug the power cable into your television and power outlet and let your TV start.

    2. Disable the Auto Device Detection feature

    1. From the home screen of your TV, look for the Settings option, then click it.
    2. Select Connections.
    3. Click Device Connection Settings, and click OK.Click Device Connection, and -LG TV Keeps Switching Inputs
    4. Locate Auto Device Detection and disable it.Auto Detection - LG TV Keeps Switching Inputs
    5. Restart your TV.

    3. Turn off Quick Start mode

    1. Press the Settings button on your remote control to get the on-screen options.
    2. Select General.General section and look for Quick Start+.
    3. Go to the Additional Settings section and look for Quick Start+.Quick Start+. LG TV Keeps Switching Inputs
    4. Click on the toggle to turn Quick Start+ off.
    5. Reboot your television.

    4. Turn off the Consumer Electronic Control (CEC) option

    1. From the home screen of your TV, look for the Settings option, then click it.
    2. Select Connections.
    3. Click Device Connection Settings, and click OK.Click Device Connection, and -LG TV Keeps Switching Inputs
    4. Locate SIMPLINK (HDMI-CEC) and turn it off.click OK. Locate SIMPLINK (HDMI-CEC) and turn it off
    5. Restart your TV.

    5. Delete the app cache

    1. Press the Home button on your remote control and select Settings.Home button  - LG TV Keeps Switching Inputs
    2. Select Apps from the list.
    3. Choose Application Manager.
    4. Click the program that got input pop-ups, and press on the Storage option.
    5. Click Clear cache.

    If there is more than one app getting the pop-up, repeat the same steps for them to clear the cache. Remember, deleting the cache will remove your app data, therefore, you need to sign in again, so keep your credentials handy. You can also try reinstalling the problematic apps to clear the air.

    6. Update your TV software

    1. Make sure your TV is connected to the internet via Wi-Fi or the ethernet cable. Press the Settings button on your remote.LG TV Keeps Switching Inputs
    2. Go to the All Settings option.
    3. Select General, then select About this TV.
    4. Click Check for Updates, and if an update is available, click Download and Install.Download and install - LG TV Keeps Switching Inputs
    5. Click Install.

    If you want the software updates installed automatically, ensure you have the Auto Update feature turned on.

    7. Reset your TV to factory settings

    1. Press the Settings button on your remote.
    2. Go to the All Settings option.
    3. Choose General, then select Reset to Initial Settings.Choose Support, then select Reset to Initial Settings. - LG TV Keeps Switching Inputs
    4. Click OK.
    5. Restart your TV.

    Remember, this should be the last resort to fix the issue, as it will remove all the apps and customization you made and return your television to the state when you bought it.

    If nothing worked for you and your LG TV is switching inputs again, the issue could be related to faulty hardware; you have to contact LG customer support and tell them about the issue & steps you have taken to fix it for further help.

    Watching an important football match and can’t afford to spend time on troubleshooting, watch it on your Windows computer; read this guide to learn how.

    If you have any questions or suggestions about the subject, feel free to mention them in the comments section below.

    Solved: PS5 is Blinking Orange

    Although the blinking orange light on PS5 is a normal consequence, it has prevented some users from powering on their console.

    We experienced this issue in our WindowsReport gaming lab. A blinking orange light means that your console is entering the rest mode. Once it enters the standby mode it should change to solid orange.

    What can I do if my PS5 won’t stop flashing orange?

    1. Wait it out

    1. Your console is probably entering rest mode.
    2. It’s possible that the update process is occurring in rest mode.
    3. Try waiting for an hour or so and check if the flashing stops.

    2. Perform a power cycle

    1. Press and hold the Power button on the console for 30 seconds.
    2. Release the button and then press it again.
    3. Your console should now start properly.

    3. Disconnect the console from the power source

    1. Disconnect all the cables from the console. Next, disconnect the PS5 from the power outlet.
    2. Leave it like that for a few minutes.
    3. Connect the console again and try to power it on with the Power button.
    4. If the issue persists, try using a different power cord.

    What happens if you unplug PS5 while blinking?

    According to Sony, if you disconnect the power cable while the console light is blinking, you might cause file loss or in the worst case damage your console.

    In practice, it’s unlikely that anything will happen if you unplug your console, however, you should refrain from doing that.

    Power indicator lights on PlayStation 5

    No lightYour console is turned off
    Blue light that changes to whiteThe console is powering on
    Solid whiteThe console is powered on and working normally
    Blinking orangePS5 is entering rest mode
    Solid orangeThe console has entered rest mode
    Blinking white and then turns offThis indicates the console powering off
    Blinking white, solid blue, or blinking blueConsole error
    Pulsing red lightThe PS5 console is overheating

    If you’re concerned that your PS5 is flashing orange, you should know that this is harmless since the device is entering rest mode. However, if your console is stuck, don’t hesitate to try some of our solutions.

    If you’re unable to wake up the console, you might want to check the battery level on PS5 controller or reset your PS5 controller to default.

    Speaking of issues, many encountered System update something went wrong error on PS5 but we tackled that in a separate guide.

    How did you fix this issue on your PS5? Share your findings with us in the comments section.

    How to Fix Router Init Failed on Altice One Routers

    If you own an Altice One router, once in a while, you will see the Router init failed message. Fortunately, we have tested it in our WR labs and we have some quick fixes for you. Router init failed means that the Altice One router failed to initialize the connection with the network.

    Before starting any solutions below verify if there is any damage on the ISP cable that reaches your Altice One router and if it’s firmly connected to the device. Also, make sure that the router’s path to your devices is not obstructed and its air vents are clear. Try disconnected some devices from the network as well to prevent network congestion.

    How do I fix Router init failed on Altice One?

    1. Restart the router

    1. Unplug the router from the power and all the connected Ethernet or media cables.
    2. Wait for at least 10 minutes and plug and reconnect Altice One to the power and devices.

    Since there is a miscommunication with the internet service provider, restarting the Altice One cable modem is the best way to fix this router error. After rebooting, usually, everything is restored to normal.

    2. Upgrade the router firmware

    1. While it’s powered on, press the WPS and Diamond buttons at the same time.
    2. The process will take a few minutes but after that, the router will restart and come back online.

    You don’t need to access the router page for this procedure. However, if you can’t access the router page, this article will help you.

    3. Use the Network Reset button

    1. Look at the back of the router and locate the Network Reset button. You will find it next to the USB service port.
    2. Use a sharp object to press it for 10 seconds. This will reset the Altice One router to normal.

    The Router init error may be caused by power outages and if at that moment, the router was updating its firmware, the best solution is to fully reset it.

    Unfortunately, after this, you will need to reconfigure Altice One again and reconnect your devices.

    If you’re having the same problems with Altice One Mini Box, just press the WPS and Diamond buttons and that will reboot it.

    That’s it! Just to sum up, if you see the Router init failed on your Altice One router, try a soft reset first. If that doesn’t fix the problem, try to update its firmware or reset it to factory settings.

    If the problem persists, contact your internet service provider about this issue.

    You might want to read our article on ways to fix a router that won’t connect to the internet for more information.

    For any other questions regarding the Altice One Router init failed issue, feel free to use the comments section below.

    5 Ways to Fix Insignia TV Channel Scan Problems

    If you have hooked up your new Insignia TV but it cannot scan channels, this guide can help you with the problem! Like other electronic devices, this smart device can also sometimes throw you a curveball.

    We will discuss some effective solutions to fix the problem so that you can reclaim your seamless TV viewing experience.

    Why won’t my new TV scan channels?

    • Bugs/glitches in TV software.
    • The input source is connected to the wrong port.
    • The channels you are trying to scan are subject to geo-restrictions.
    • Damaged or loose cables.

    How do I fix the Insignia TV channel scan issues?

    Before proceeding with any detailed steps to fix the channel scan issues on Insignia TV, go through the following preliminary checks:

    • Check if the input source is plugged into the correct port and restart your router.
    • Inspect the cables for damage, replace them if needed, and ensure they are properly connected.
    • Check the batteries of your remote and replace them if needed.
    • Make sure you look for channels available in your region.

    1. Power Cycle your TV

    1. Unplug the power cable of your TV and the power outlet.
    2. Press & hold the Power button on the remote to remove any residual charges.Press the power button on the remote controller - insignia tv channel scan problems
    3. Wait for 2-3 minutes, then plug the power cable into your TV and power outlet. Once the television starts, check if you can find the cable channels.

    You can also try power cycling your router or updating the router firmware to fix the connection issues; read this guide to learn more.

    2. Run the Auto Channel Search

    1. Click the Menu button on your TV remote, use the left & right arrows to locate Channels, and press Enter.
    2. Locate Auto Channel Search or a similar option, then press Enter.highlight Auto Channel Search - insignia tv channel scan problems
    3. Next, you need to choose an input source; use the arrow keys to choose among Cable/Satellite Box,  Antenna, and Cable from the wall, and then press Enter.Select the medium - insignia tv channel scan problems
      • Cable/Satellite Box – you will get a screen explaining how you can connect a box to your TV. Press Enter, and when the setup is complete, then press Exit.
      • Antenna or Cable from the wall – Your TV will scan for channels.
    4. The scan will begin; if it doesn’t, look for the prompt to initiate it.Scan started

    This process takes some time, so don’t click any button on your remote or television, and ensure your Wi-Fi router, cable box, or HDMI cable stays connected. You will get the message once the action is complete. Close the menu and check the channel list.

    3. Update your TV OS

    1. Locate and click the Settings button on your TV’s home screen.
    2. Go to My Fire TV, click it, and select About.
    3. Select Check for Updates.Check for updates  - insignia tv channel scan problems
    4. Your TV will look for updates, and click Install Update.Install updates

    Wait for the process to complete, and follow the onscreen prompt if you get any.

    4. Re-register your Insignia Fire TV on Amazon (works for Fire TV edition)

    1. On the home screen of your television, go to Settings.
    2. Locate and select Amazon.Amazon account - insignia tv channel scan problems
    3. Next, click Amazon account and select De-register.Deregister insignia tv channel scan problems
    4. Click De-register again to confirm the choice.

    To re-register your TV on Amazon, follow these steps:

    1. Go to Settings and select My Account.
    2. Choose Amazon Account, then click Register.Register Amazon account  - insignia tv channel scan problems
    3. Enter your Amazon credentials and click Sign in.
    4. Follow the on-screen instructions to register your television again.

    5. Reset your TV to factory settings

    1. Locate and click the Settings button on your TV’s home screen.
    2. Go to System, then select Advanced System Settings.
    3. Choose the Reset to Factory Defaults option, then select Reset.Reset -Insignia TV Channel Scan Problems
    4. Click OK to confirm the choice.

    Remember, this should be the last step to fix the issue as it will remove all the apps and customization you made and return your television to the state when you bought it.

    If none of the methods mentioned worked for you, you must contact the TV provider and explain the issue & solutions you tried for further assistance.

    Resolving the issue via provider can take some time, meanwhile, you can watch TV on your Windows computer; read this guide to learn how.

    If you have any questions or suggestions about the Insignia TV channel scan problems, feel free to mention them in the comments section below.

    Fix: Technika TV is Not Turning On

    Powering on your TV is one of the easiest things to do, but when your Technika TV is not turning on after numerous tries, there may be an underlying issue.

    Has the remote stopped working? Could it be a power issue? Find out the root cause of the issue and subsequent troubleshooting tips.

    Why is my Technika TV not turning on?

    • The power supply is disconnected.
    • You have a faulty remote control or dead batteries in it.
    • Bad capacitors in power supply board.
    • The fuse on the power board is blown.
    • Your TV has entered into safe mode to prevent damage.

    How do I fix my Technika TV if it won’t turn on?

    Attempt the following basic troubleshooting steps first:

    • Check if your TV is plugged in correctly and all cables are connected properly to their respective ports, then press and hold the Power button for at least five seconds.
    • Try a different outlet. If you’re using an extension cord, try plugging the TV directly into a direct power source.
    • Ensure the remote control batteries are not dead, and try using other batteries if needed.
    • Disconnect any external drives connected, as some USB drives can prevent your TV from turning on.
    • Ensure there are no obstructions between your remote control and TV.

    1. Disconnect your TV from the power supply

    If you’ve already switched it off and turned it back on, but it still won’t power on, it’s time to increase the wait time. Technika TVs have a safety mode feature known as the Ecohome mode for energy efficiency.

    If your TV stays idle for a while, it will turn itself off to prevent damage. If this is the case, you may have to wait slightly longer before you can power up your TV. As long as you can see the Standby light, it’s probably nothing to worry about.

    2. Power cycle the remote and TV

    1. Take the batteries out of your remote control, press and hold the power button for a few seconds, then release.
    2. Now, press every button on the remote at least once while the batteries are out. This helps to clear residual power.
    3. Insert the battery into the remote.
    4. Next, unplug the TV from the power outlet, and press and hold down the TV’s power button for a few seconds.
    5. Wait for one minute after doing this, plug the TV back into the power source, and power it on.

    3. Check the manual for troubleshooting

    Most TVs come with a user manual on how to operate your device and safety measures you should take to prevent damage. It also contains troubleshooting steps for common problems, so you may want to check for any answers.

    If you can’t find your user manual, you can download one from their website.

    4. Contact customer support

    If all else fails, there might be something wrong with your TV. Provided your warranty is valid, you can get a checkup for free from your manufacturer.

    You can contact Technika Customer Support, and they will help you troubleshoot your issue over the phone or schedule an appointment for an expert to come in and troubleshoot the device at your home or office.

    How do I turn on a Technika TV without a remote?

    • Use your PC as a remote – You can control your Technika TV with a PC, laptop, or tablet. The first thing you need to do is to connect the device to the TV. You can use a USB cable and download software to configure the USB receiver. 
    • Use your phone as a keyboard – If you have an Android or iOS phone with Bluetooth, you can use it to turn on your TV. You’ll need to download a control app to pair your TV and phone for easier navigation.
    • Download a remote control app – Android and iOS devices allow you to use your mobile device as a remote control for your Technika television. Technika particularly has its dedicated remote app. You only need an internet connection on your phone and television set.

    And if you feel these options are not sufficient, you can always opt for universal smart TV remotes. These come with other advanced features like a keyboard, but you need to be careful as your exact model may not pair well.

    TV issues are not specific to the Technika model, and you may experience the same when your Sony smart TV won’t turn on. Sometimes, it’s a damaged Vizio remote control sensor that’s preventing your TV from turning on.

    As always with electronics, it’s best to rule out things like broken wires or bad connections. If you’re lucky enough to discover such an easy fix, you can move on to other areas. Most likely, at least one of the above solutions will apply to you.

    And if your Technika TV is still not turning one and has given up on you, it might be time to look into other TV models.

    Let us know if you have experienced any of these problems or have any additional questions.

    How to do a Firmware Update on Your Virgin Hub 3

    If you want to do a firmware update on your Virgin Hub 3, forget about it because you can’t do that. The Virgin HUB 3 firmware update is pushed automatically by the manufacturer.

    Does Virgin router update automatically? Yes, the Virgin Hub 3 updates automatically. However, our Windows Report networking team has devised a solution to force the process.

    How do I update my Virgin Media Hub 3 firmware?

    1. Heset Virgin Media Hub 3 to factory settings

    1. Turn on the Hub.
    2. Locate the Reset button on the back of the device and use a pen or a sharp object to press it for 10 seconds.
    3. Now wait for about 5-10 minutes for the Virgin Media’s Hub 3 to reboot and come back online.
    4. It will be ready when the white power light from the front of the device is lit continuously.

    If there are any new software updates from Virgin Media, they are likely to be installed after this reset. However, there is no guarantee that it will happen. As we’ve mentioned above, the firmware update is pushed automatically by Virgin Media and there are no known criteria on how they prioritize this action.

    2. Set the Virgin Media hub in Modem Mode

    1. Make sure that your PC is connected with an Ethernet cable or Wi-Fi to the hub.
    2. Open a browser of your choice, enter the following IP ((this is the default Virgin Media Hub IP address) into the address bar and press Enter: 192.168.0.1
    3. Log into the hub with your credentials. Check the manual of the device to get them.
    4. Go to Modem Mode, check the Enable Modem Mode option, and select Apply Changes.

    Although it’s not guaranteed, from our tests in the WR lab, it’s more likely to get a firmware update for the Virgin Media’s device if you set the device in Modem mode.

    However, you should know that by setting the Hub 3, 4, or 5 to Modem mode, you will disable some of its functions. One of the most important is the intelligent Wi-Fi capabilities so you might experience latency or packet loss issues.

    To set the hub back to router mode, retake the steps in the solution above and check the Enable Router Mode option instead. Here’s a comprehensive guide on what to do if the Wi-Fi is not working on the Virgin Media Hub.

    This method works on Virgin Media Hub 3, 4, or 5 (not 5x) and Super Hub 1, 2 or 2AC. 

    How do I know if Virgin Media Hub 3 is updating the firmware?

    When the Virgin Superhub or Virgin Media Hub 3 is updating, you will see the front light blinking and you will experience an internet connection outage of 10 to 30 minutes.

    Because the update time is so long, you may be tempted to think that there’s a problem with your Virgin Hub or Virgin Router.

    Instead, check the Virgin Media service status or call them directly to learn about potential issues with the network.

    Troubleshooting issues with a failed or aborted firmware update on your Virgin Hub 3

    If you disconnect the router from the outlet or turn it off during its update, it’s likely to have issues with the Virgin Hub 3 not working or connecting. Here’s what you need to do in this case:

    • Remove all connected devices from the Ethernet ports and the wireless network.
    • Reset the Virgin Media Hub 3 to factory settings, as shown in the first solution from this guide.

    You should also note that not all the subscribers are eligible to get all the SuperHub 3 firmware. Some of them may introduce new features that require extra cost.

    To summarize our guide, you can’t manually update the Virgin Media Hub 3 firmware, but you can trigger it by restoring it to factory settings or setting it in Modem mode. 

    We hope that our guide provided sufficient information about the process and now your device is working properly.

    You might also be interested in reading our guide on what to do if Virgin Media is blocking IPTV.

    If you have any further questions or suggestions on this topic, access the comments section below to leave us a note.

    Fix: Can’t Download Please Ask That it be Resent to You WhatsApp Error

    Can’t download please ask that it be resent to you error message stops you from downloading files from WhatsApp.

    Main reasons why this happens are because the file expired, WhatsApp servers are down, or your Internet is slow. Following the steps below, you’ll address all possible reasons and fix it in no time.

    How do I fix the Can’t download please ask that it be resent to you error?

    1. Restart the app

    1. Locate WhatsApp on your phone. Tap and hold its icon.
    2. Select App info from the menu.
    3. Tap on Force stop.
       
    4. Lastly, tap OK.
    5. Start the app again and check if the problem is still there.

    2. Clear the cache on the Android device

    1. Open WhatsApp app info.
    2. Navigate to Storage.
    3. Now tap on Clear cache.
    4. Restart the app again.

    3. Check if the app has the necessary permissions

    1. Open the WhatsApp app info once again.
    2. Navigate to Permissions.
       
    3. Select Photos and videos.
    4. Lastly, select Allow.
    5. Also, check if storage permission is enabled so that the app can access internal storage.

    4. Adjust the time settings

    1. Open Settings on your phone and tap on General management.
       
    2. Now choose the Date and time.
    3. Disable Automatic date and time.
    4. After a few seconds, enable it again.
    5. If the time isn’t correct, you might have to adjust it manually.

    Can I download old deleted WhatsApp messages?

    If you have Google Drive backup enabled, you can download old messages by doing the following:

    1. Once you install WhatsApp on your device for the first time, enter your phone number and name.
    2. If the backup is found, tap on Restore.
    3. After the backup is downloaded, you should have all your old messages available again.

    Keep in mind that this won’t work for messages that have been manually deleted from the app.

    In case you encounter problems with this, we have a guide on what to do if WhatsApp can’t restore chat history.

    Can’t download please ask that it be resent to you error can cause problems, and in most cases, it means that the file is gone from WhatsApp servers. Sometimes the problem will appear if you’re on a mobile network and not downloading files over a Wi-Fi connection.

    In these cases, it’s best to ask the sender to resend the files or ask them to upload the files to the file-sharing website and then send a link to you.

    These aren’t the only issues that you can encounter, many reported that WhatsApp web chat history sync is not working or that this version of WhatsApp has expired.

    Have you ever encountered this issue and how did you fix it? Let us know in the comments below.

    How to Fix Vodafone Error 69 [SMS Issue]

    Mobile carriers or network operators usually work seamlessly, but issues may arise when switching handsets, especially Error 69 in Vodafone. The error appears when sending an SMS.

    The error message reads, Can’t send message with Vodafone, error 69. Subsequently, none of the sent SMSs are delivered to the recipient. Many have the issue with Vodafone India, but based on user reports, it’s prevalent worldwide. 

    Why are Vodafone texts not sending?

    When Vodafone texts are not sending, it could be a server outage at the network provider’s end. Also, the subscribed plan may not allow sending text messages.

    Besides, the error code appears when an incorrect SMSC (Short Message Service Center) is configured on the mobile device.

    How do I fix Vodafone Error 69? 

    Before we start with the slightly complex solutions, try these quick ones first:

    • Connect the SIM card to another device. If the messages go through, it’s the first mobile phone to blame. If not, it’s the network provider or SMS settings at fault.
    • Your device receives the SMS/message settings when inserting the SIM the first time. Make sure to save them to be able to send texts.
    • Restart the mobile device. Also, take the SIM card out, wipe it with a clean cloth, and reinsert it into the slot.
    • Try another sim slot on the device if it’s a dual-sim phone. 
    • If you just collected the SIM card, wait 24-48 hours. There’s usually a cool-off period before you can start sending text messages.

    If none work, head to the fixes listed next.

    1. Check the subscribed plan

    First, ensure the service provider’s plan you are subscribed to allows sending text messages. Several packages don’t support the functionality. So, verify the plan details and determine the number of messages permitted per day/month.

    Also, you may get an Error 69 on SMS in Vodafone when the maximum limit is reached. In this case, upgrade the plan or get a text top-up if available in your region.

    2. Change the SMSC number

    2.1 On Android

    1. Open the Message app from the home screen, tap on the ellipsis (three-dot icon), and select Settings.settings 
    2. Select the Vodafone SIM from the list, if you have multiple SIM cards plugged in.
    3. Scroll down and tap on SMSC.SMSC
    4. Now, check the number listed over here and verify whether it’s the same that should be in your region.
    5. To verify, search on Google. For instance, if you use Vodafone India, identify the state-specific SMSC number. Remember, it should be for the state the SIM was registered in and not where you presently reside.
    6. Now, enter the SMSC number in the text field, and tap OK.change to fix error 69 vodafone
    7. Finally, restart the Android device and check whether Error 69 in Vodafone is fixed.

    2.2 On iPhone

    You can’t check or change the SMSC number on an iPhone. While this was possible earlier, Apple has removed the functionality altogether. In this case, you will have to get the latest network settings.

    To update the network carrier settings, open the iPhone Settings, go to General > tap on About > wait 30 seconds for available updates to appear > follow the on-screen instructions to install them.

    3. Clear the message cache

    3.1 On Android

    1. Open the Android settings, and tap on Apps.apps
    2. Select Messages from the list of applications. 
    3. Tap on Storage.storage
    4. First, tap on Clear data and then Clear cache to delete both.clear cache to fix error 69 vodafone

    3.2 On iPhone

    There’s no built-in way to clear the app-specific cache on iOS devices. You can use a third-party solution or offload the app, but it must be reinstalled later.

    So, to solve Error 69 with Vodafone on an iPhone, clear all the stored messages and data files. Remember, clearing the message cache also helps fix things when you can’t send messages with T-Mobile or even with the Arena of Valor error 201.

    4. Reset the network settings

    4.1 On Android

    1. Open the Settings app on your Android phone, and tap General management.general management
    2. Now, tap Reset.reset to fix error 69 vodafone
    3. Then, select Reset network settings.network settings
    4. Tap the Reset settings button to confirm the change.reset settings to fix error 69 vodafone

    4.2 On iPhone

    1. Launch the iPhone Settings, and tap on General.general
    2. Select Transfer or Reset iPhone.reset
    3. Tap on Reset at the bottom.reset
    4. Now, tap on Reset Network Settings from the menu.reset network settings to fix error 69 vodafone
    5. Enter your passcode and confirm the reset.

    Switching to the default state can help fix Error 69 while sending texts on Vodafone when the network settings are misconfigured. This also works if Vodafone is blocking specific websites or with another text issue, O2 error 38.

    5. Contact Vodafone support

    In case none of the changes help, it’s best that you contact Vodafone support. If you are based in India, go to the MyVI website instead. They will be able to identify and troubleshoot the problem. 

    Remember, if the device can’t make calls and throws Error 69 while sending text messages, it could be a damaged SIM card to blame. And a replacement is the most viable solution. All this can be done through the official support channel!

    One of the solutions here should have helped with the Vodafone SMS Error 69, and you should now be able to send text messages seamlessly. It would most likely have been a problem at your end since server outages are rare and temporary.

    Issues with your carrier, such as this one, can lead to other problems including the EE error 0, but we covered that issue in another guide.

    Also, did you know it’s possible to use a phone as a keyboard on the PC? Most of us didn’t. Besides, you could use the PC as a microphone for the mobile. It’s all possible!

    For any queries or to share what worked for you, comment below.

    How to create Excel formulas using the new authoring features

    Microsoft debuted new authoring features that will let users create new Excel formulas in just a few steps, according to the latest blog post.

    The new features are available to Excel for the Web, and Windows users can use them to bring their formulas to life (or good use). It is a welcomed addition to Excel, right before the arrival of the Copilot AI on the platform.

    Copilot will be released on Excel in November, and the AI tool will help users calculate and summarize data, as well as come up with Excel formulas to ease the workload and improve efficiency.

    The new authoring features give users more ways to create Excel formulas, and Copilot might also make use of them, once it’s released. Either way, here’s how you can use the new features.

    How to create Excel formulas using the new authoring features?

    1. Using the Insert Function dialog box: this new box allows users to select the right function and its arguments; it comes with a list of categories, in case users want to look up a specific formula. It can be accessed by opening Microsoft Excel, then going to the Formulas tab and selecting the Insert Function button (alternatively, users can also click the fx button on the formula bar).create excel formulas
    2. Improving the readability of your Excel formulas with Parantheses Coupling: this new feature will automatically appear and take effect every time a user hovers over a complex Excel formula that contains multiple parentheses. The feature will intelligently highlight each set of parentheses, allowing for efficient editing, without getting confused, as Microsoft says.
    3. Monospaced Font is also a new feature coming to Excel and it will ensure that formulas will now have a proper space between numbers and letters, improving their creation, editing, and readability. This feature will be automatically enabled. create excel formulas
    4. Finally, with Value Preview, Excel users will have a simplified troubleshooter of Excel formulas, by using this feature to get real-time displays of values associated with any part of a formula. Users will only need to hover the mouse over a specific part of the formula. This feature is currently rolling to Windows users.

    What do you think about all these new features coming to Excel? Let us know your opinion in the comments section below.

    You can now create your own custom themes in Edge. Here’s how

    Following the release of Edge 119, Microsoft has added a built-in Color picker to the Edge themes section in Edge 120. The new update comes with some customization options that have been long awaited and requested in the Feedback Hub, custom themes being the most important. The feature is still hidden, but you can enable it in Canary right now.

    Currently, there are plenty of themes to choose from in the Edge add-on Store. You can change the browser’s look even with themes from the Chrome Webstore, and Edge has over a dozen color-based themes. But when compared to Chrome, Edge is missing a theme color picker.

    With Edge 120, Microsoft is adding that color picker for themes. Its UI is minimal, but you can apply any color by setting values to R, G, B, H, S, L, or HEX. Once you select a color, Edge applies that theme to the top of the browser frame and toolbar.

    If you want to enable the built-in Color Picker for Themes in Microsoft Edge, follow the next steps:

    1. Close Edge Canary.
    2. Right-click on its shortcut and select Properties.
    3. In the Target field, hit space and apply the following command
      --enable-features=msSettingsThemesColorPicker
    4. Click OK and apply.

    How do I make a custom them in Microsoft Edge?

    Note icon NOTE
    Make sure to launch Microsoft Edge using the shortcut edited above.
    1. In Edge, click the three dots in the top-right and select Settings > Appearance.
    2. Under Customize appearance > Theme, click on Pick a color.
      This image has an empty alt attribute; its file name is pick-a-color-option-for-theme-in-Edge-appearance-settings.jpg
    3. Choose the color you want and release the left-click on your mouse to apply that color to the Edge browser. To change it again, go to the Color Picker and choose another one.
    4. You can restore the default or another theme other than the autogenerated theme by clicking on the respective option.

    And that’s about it. You can enjoy your custom-made theme or change it with the new Color picker. While it’s not that complex right now, it can offer a fair level of personalization. We expect a much more refined set of customizations in the subsequent Edge releases.

    How often do you change the appearance of your browser? Be sure to share your answer in the comments section below, and we’ll continue the talk.

    Microsoft Paint Cocreator: A complete guide on the new AI tool

    Describe what you’d like to create, asks the new DALL-E powered Cocreator, a new AI tool coming to Microsoft Paint, recently discovered by Windows spotters, and then officially announced by the Redmond-based tech giant.

    A person taking a walk in the park during the autumn season, we type in, as outside, in the northern hemisphere, the autumn season is in full bloom. It’s October and we’ve got access to the limited preview of the Microsoft Paint Cocreator, after joining the waitlist for it in the Dev Channel.

    Finding Cocreator is very easy: we just needed to open up Microsoft Paint – we’ve made sure the app is updated to the latest version – and Cocreator was there, alongside the newly-released Layers, which is a feature that adds layers to your Paint projects.

    Once we clicked on Cocreator, the app will welcome us with a short presentation on how to use it to generate the art we want.

    As you can see below, the presentation also acts like a mini-tutorial showcasing everything you need to know before getting your hands on it.microsoft paint cocreator

    Then the AI tool appeared as a right sidebar in Microsoft Paint, urging us to describe what we’d like to create. microsoft paint cocreator

    With this first task in hand, we’ve taken our time with Cocreator and experimented with it for a while. And we’ve come up with a guide on this powerful and incredibly useful image creator.

    Cocreator: 5 important things you need to know before trying it

    Before diving in, if you can’t wait until Cocreator is released to experience it, then you should know these things, first.

    1. Cocreator is currently available in the Windows Insider Channels. We’ve got it while being on the latest version of the Dev Channel, with Microsoft Paint updated to the latest version. You can update it from the Microsoft Store.
    2. Once you’ve done that, you should be able to see the new Cocreator button inside Paint. However, clicking it will prompt a join the Waitlist pane. If you want to use the AI tool now, you should join it. Expect to get permission in 3 to 7 days (6 days in our case).
    3. When you do have permission to start creating images, Microsoft grants 50 points of Credit, and each creation costs 1 Point. Microsoft hasn’t revealed yet how to get credit points, but most likely they will be purchased.
    4. Cocreator is currently available only in the following regions – the United States, France, the UK, Australia, Canada, Italy, and Germany.
    5. Only the English language is supported at this time.

    9 art styles to choose from

    We’ve typed in our request. Cocreator took it and then came back with options, no less than 9 choices of art style:

    • No selection – This art style does not offer anything particular, but when we chose it, Cocreator rendered hyperrealist images. microsoft paint cocreator
    • Charcoal – This art style will render your inputs into images with a vibrant, almost manually drawn vibe. It looks naturally drawn, even though it’s not.
    • Ink Sketch – Cocreator will generate your inputs into images with comic-style art to them. Quite frankly, this could be a very useful way to create comics, even if you don’t know how to draw.
    • Watercolor – A personal favorite, this art style will make your inputs look like paintings. Which is more than enough from just 15 seconds of work. microsoft paint cocreator
    • Oil Painting – Very similar to the other forms of naturally drawn art styles, Cocreator will generate images as oil painting. The best thing? You can even see the paintbrush’s tracks.
    • Digital Art – This art style will create lush images with vivid colors and vague details. While it doesn’t seem the look naturally drawn, the images are impressive.
    • Photorealistic – Another personal favorite, this art style will prompt Cocreator to generate realistic images, with vivid colors, a lot of details, and vibrant all-around. They look like photos.microsoft paint cocreator
    • Anime – If you’re a fan of anime-style art, then this option is perfect for you. The images look naturally drawn (in the anime style, of course), and full of colors.
    • Pixel Art – Finally, the pixel art option will prompt Cocreator to generate images in a pixel art style. This could be very useful if you want to develop a game and need artwork.

    For now, Cocreator only offers these 9 options. However, there is no doubt Microsoft will add more options in future updates, and who knows, maybe even integrate the latest DALLE versions in it. Bing Chat has them, so Cocreator might be getting them too.

    Ultimately, it all comes down to your preferred choice of art style. When you choose one, once you hit the Create button, Cocreator will generate 3 examples for you to choose from.

    Microsoft Paint Cocreator can be a very practical app

    Along with layers, Cocreator can be very useful for creating fast content for social media posts, giving small businesses a way to reduce costs by using AI tools. Microsoft somehow predicted this earlier this year, when the Redmond-based company released a study on the positive impact of AI on small businesses.

    So it’s good to know Microsoft is integrating AI tools, such as Cocreator, into native Windows apps.

    The tool is also extremely easy to use, and the only hard thing to do is to actually come up with an idea for your prompt. So, users don’t have to be versatile in technology to generate images with Cocreator. You just have to type in your input and select an art style, and the tool will take care of the rest.

    The only drawback is that ultimately Cocreator runs on credit, and once the credit is down to 0, you won’t be able to generate any more images, until you get credit. So it’s not a free tool yet, but Microsoft will come up with ways to purchase or earn credit points. Microsoft Rewards, maybe? It can be possible.

    Either way, Cocreator will get updated in the future. Microsoft will add many changes and improvements to it, and it is possible it will add newer versions of the DALL-E AI to it, as well. This would make Cocreator a very versatile app to use, and Microsoft Paint, as a whole, would be revived, if it’s not already.

    With this being said, will you use Microsoft Paint Cocreator, when it’s released? What do you think of this AI tool?

    Word turns 40, and Microsoft will enhance it with some great new features

    Microsoft Word was released back in 1983, which means everybody’s favorite text-editing app turns 40 this year, and the Redmond-based tech giant is up for a celebration of it, according to the company’s latest blog post.

    What is a celebration without reminiscing the great moments of the app’s existence, Microsoft does just that. In its 40 years of life, Microsoft Word has become one of the most used office tools in the world, says Microsoft, and somehow, the app is just starting.

    For example, Microsoft will get AI capabilities next month, with the arrival of Copilot in the platform, effectively enhancing and emphasizing users’ creativity and productivity alike. Copilot promises a new era for document editing, but we’ll have to wait and see.

    But this is not all, though. To celebrate 40 years of existence, Microsoft will be releasing a series of new updates to the Word, and by the looks of them, we’re excited. Check them all out below.

    How old is Microsoft Word? 40, and young enough to get exciting features

    Microsoft says Word will get features that will transform the app into a content creation and consumption platform. That means users won’t only be able to compose, write, and edit their documents, but read them there too.

    Here’s what Microsoft says we should expect to see in Word moving forwards:

    • Shepherding in the age of AI: Copilot provides a fundamental shift in writing & reading experiences. Our goal is to continuously iterate on feedback we get from you, our users, as you create and read content, while leveraging Copilot across platforms and devices.
    • Make your words shine with Word for the web: We’re continuing to invest and innovate in Word for the web to make it a great creation and consumption tool. This includes using your feedback to prioritize our areas of investment.how old is microsoft word
    • Write better together: Word has been at the center of collaborative content creation since its inception. Over the years, we’ve made it easier to co-create with others, provide feedback, exchange ideas, and produce quality content. We’re committed to providing a consisted experience and ensuring that Word remains THE place to efficiently create, edit, and review content, matter where you are, who you are working with, or what device you’re using.
    • Extensibility as a customization driver: We are committed to giving Word developers the tools and capabilities they need to build amazing experiences and support custom workflows.
    • Word as your favorite consumption app: It’s not just about content creation. Word is a great place to read the documents that matter to you, on any device, wherever you are.

    For how long have you been using Microsoft Word? What are your experiences and opinion of it, now that the tool turns 40?

    How to add the Designer app on Microsoft Edge’s sidebar

    The latest update package to Microsoft Edge 118 comes with Designer Preview toogle for users, which can be enabled to use inside the browser.

    For those of you who don’t know, Microsoft Designer is a tool that allows users to create social media posts, images, cover, and graphic designs in minutes. The app is coming to Microsoft 365 apps, as well, and it will take a first step in Word, at the beginning of 2024.

    But now, users can try a preview of it in Microsoft Edge. According to the latest entry in the updated timeline, the release will be in English for now, and Designer on Edge’s sidebar will only be available in Australia, India, New Zealand, South Africa, and the United States.

    Designer is a new AI system from Microsoft that generates visual, customizable designs based on your text description and images.

    Microsoft

    How to add the Designer app on the Microsoft Edge sidebar

    The Designer app will exist in a preview mode, to all Microsoft Edge users with a Manifest version 4.8.5 or higher, according to Microsoft. Users who are working on managed devices will also be able to add the app on the sidebar.

    To add the Designer app, the user will need to:

    1. Open Microsoft Edge, and click on the + button. designer edge sidebar
    2. Once there, the Designer toggle should be available for users to enable. Clicking on it will enable Designer.

    For those users who are not living in Australia, India, New Zealand, South Africa, and the United States, they can still add Designer to their sidebar, but the icon will disappear every time you restart your Microsoft Edge.

    To do it, you’ll need to follow the same steps, but once you click on the + icon, type in Microsoft Designer in the search box, and select the app from there.designer edge sidebar

    It will pop up in the sidebar for the rest of your browsing session, but it will disappear once you restart Microsoft Edge.

    GraphQL Unauthorized Error: 3 Ways to Fix it

    GraphQL unauthorized error has recently reported on Facebook, and it will prevent you from using it in your browser.

    This is a major problem, especially if you use Facebook to stay in touch with your friends, but in today’s guide we’ll show you a few solutions that can help you.

    What is 401 unauthorized error in GraphQL?

    • This is a coding error and it appears if the users doesn’t have necessary permissions to access GraphQL API.
    • If you see this error on Facebook, you should know that this is a server-side issue and not something caused by your PC.

    How do I fix unauthorized error in GraphQL?

    1. Use the Facebook Messenger URL

    1. Open your browser.
    2. Navigate to Facebook Messenger in browser.
    3. Check if the problem still appears.

    2. Use the Messenger on your phone

    1. Download Facebook Messenger for your phone.
    2. Once the app is installed start it.
    3. Log in and you shouldn’t see any errors.

    3. Use Messenger app from Microsoft Store

    1. Press Windows key + S and enter store. Select Microsoft Store from the list of results.
    2. Search for messenger and select Messenger from the list of results.
    3. Click the Install button and wait for it to install.
    4. Once installed, start it and check if the problem is still there.

    GraphQL unauthorized access error in Facebook will prevent you from using the chat feature, and the only way to circumvent it is to use one of these workarounds.

    The developers are aware of this issue, and they are likely already working on it. This isn’t the first time these types of errors occurred and we covered Error performing a query on Facebook in a separate guide.

    Similar errors have been reported in the past, such as Failed to load response data error in Chrome and Error occurred while trying to proxy request.

    Did you find a more efficient way to fix this problem? If so, don’t hesitate to share it with us in the comments section.

    Fix: ITVX Not Working on Firestick – 5 Tested Solutions

    Many of our readers are complaining that ITVX is not working properly on Firestick. Since the WR test team experienced the problem, they prepared the necessary solutions to fix it.

    Why is ITVX not working on my Fire Stick?

    • The ITVX app is bugged or not updated
    • Problems with the cache and data from ITVX
    • ITVX only works in UK so you will need to install a VPN if you want to watch it from other locations.
    • Incorrect storage permissions
    • The on-demand service might be down or your network connection is problematic. Check the status for ITVX.

    How do I fix ITVX if it’s not working on Firestick?

    Before starting to tweak the app and Firestick, check these quick troubleshooting steps:

    • Make sure that you have a stable connection to your Wi-Fi hotspot and restart the router just in case.
    • If you’re using a VPN connection, try to enable or disable it and see if that changes the situation.
    • Disconnect the Firestick from your TV and its power source, leave it for about 10 minutes, and then reconnect it.

    1. Clear the ITVX cache & data

    1. In the Firestick menu, go to Settings.
    2. Now, select Applications.
    3. Now, select Manage Installed Applications and choose the ITVX app.
    4. First, select the Clear cache option and check if ITVX works. If not, come back to this menu and select Clear data instead.

    Clearing the cache and data from the ITVX app usually fixes the problem in most cases but if it doesn’t, go through with the next solution.

    2. Allow storage permissions to ITVX

    1. Go to Settings and select Applications.
    2. Now, select ITVX from the list of apps.
    3. Next, select Permissions from the list of options.
    4. Finally, on Storage, select ALLOW.

    This solution will also fix a buffering issue that some of our readers complained about.

    3. Update Firestick

    1. Launch the Firestick and select Settings.
    2. Now, select My Fire TV from the menu.
    3. Next, go to About and select Check for Updates.
    4. If you have any updates, you will have the option to Install Update.
    5. After installing the update, Firestick will restart automatically.

    Check now to see if you get any error messages on your screen. If Firestick is not booting at all, check this guide for the right solutions to fix it.

    4. Turn on automatic updates

    1. Go to Settings and select Applications.
    2. Next, select Appstore.
    3. Check if the Automatic updates are turned on. If not, turn them on from this menu.

    By turning on the automatic updates, if ITVX has any new updates, they will be loaded as soon as they are available. You can also update the app individually from the Settings>Application menu. When you select an app, you will see the option to update it if it has any available.

    5. Reinstall ITVX

    If all else failed, you may also try to reinstall the ITVX app on Firestick. To do that, go to Settings>Applications and uninstall ITVX. Next, go to the App Store and reinstall it freshly.

    Here, we conclude our guide on how to fix ITVX if it’s not working on Firestick. Hopefully, our solutions helped you fix any performance issues for ITVX on Firestick.

    Duly noted, ITVX is now making a transition from ITV Hub and they still haven’t updated the apps, but this troubleshooting guide should provide useful information.

    Also, remember that ITVX Streaming only works in the UK so make sure that you pick a UK server from the VPN Settings if you want to watch the programs from another country.

    Some of our readers also complained about Firestick not installing apps. If you have the same problem, the highlighted guide will help you.

    For any other suggestions or questions, head over to the comments section below and leave us a note.

    Solved: YouTube TV Spinning Circle Error

    It’s common for apps to have issues, so if you see the YouTube TV spinning circle, this is an easy-to-troubleshoot problem.

    This article explains everything you need to know about the YouTube TV loading wheel, including why you’re seeing it, what causes it, and how to stop it when you see it.

    Why is YouTube TV not loading?

    • Your network connection may be unstable.
    • YouTube TV may have a lot of users trying to access it at once, overloading the servers.
    • Your device is not compatible with YouTube TV.
    • You don’t have enough memory for the app to run smoothly.
    • You’re using a modded version of the YouTube app.

    How do I fix the YouTube TV constant spinning circle issue?

    Start off with the following basic workarounds:

    • Check your Internet speeds and ensure they’re fast enough for streaming.
    • Close YouTube TV, sign out of the app, reopen it, and sign in again.
    • Make sure that your date and time settings are correct on your device.
    • Unplug your router for 30 seconds and plug it back in.
    • Check for an update for the YouTube TV app and restart your TV.

    1. Check for your TV’s firmware updates

    1. For this solution, we shall be using the TCL model.
    2. On your TV, find your Settings.
    3. Go to System.
    4. Click on About then select Software update.
    5. Select Network update and click on System update.
    6. Now click on Check Update. Your system will scan for any available updates.
    7. You’ll either start downloading updates or get a message that your TV is already up to date.

    2. Clear app cache and data

    1. On your TV, find your Settings.
    2. Go to Apps and select YouTube.
    3. Scroll down and hit Clear data and Clear cache.

    3. Uninstall recent app updates

    1. On your TV, find your Settings.
    2. Go to Apps and select YouTube.
    3. Select Uninstall updates.

    Uninstalling recent app updates could help fix the issue, especially if the spinning circle started after you updated the app. This could imply the update was corrupt.

    4. Lower the streaming resolution

    1. Launch your YouTube app and open the video you wish to watch.
    2. Press the OK button on your remote to bring up the display menu, and select the Settings icon.
    3. Select Quality.
    4. From the options, choose a quality lower than your current one and see if the spinning circle disappears.

    5. Restore app to default settings

    1. On your TV, find your Settings.
    2. Go to Apps and select YouTube.
    3. Select Clear defaults.

    This will clear any customizations you’ve made on the app that may be causing it to be slow.

    6. Reinstall the app

    1. Launch the Google Play Store or Apple Store depending on your TV.
    2. Search for the YouTube TV app and click on it.
    3. Select the Uninstall button.
    4. Wait for it to finish uninstalling, then click Install again.

    7. Switch off your VPN

    If you’re using a VPN (virtual private network) to access YouTube TV from banned countries, this could be why you’re getting the spinning circle problem.

    VPNs are designed to hide your IP address from internet service providers so they can’t see what country you’re in and block your access based on that information.

    However, they can sometimes interfere with streaming services like YouTube TV by slowing down their performance or causing them to crash altogether. You can turn it off or switch to a reliable paid VPN since with the free ones, your VPN or proxy can be detected on YouTube TV.

    8. Free up your TV RAM

    If restarting your TV does not resolve the spinning circle issue, you’ll need to free up some memory. You can do this by deleting any photos, or videos stored in your internal storage or uninstalling unnecessary apps.

    Further, you can also clear the cache and data of system and rarely used apps. If you’re still not successful, you may have to factory reset your TV as a last resort. Sometimes, it’s your device that is causing compatibility issues, which can be easily resolved by wiping out all data.

    What are some other tips to avoid the YouTube spinning circle?

    • Keep your app updated at all times and only download from official sources to prevent compatibility issues.
    • Limit the number of connected devices to a minimum to prevent bandwidth hogging.
    • Update your TV firmware regularly.
    • Avoid bulking up your TV’s storage with unnecessary apps and files.

    To sum it up, there’s no good reason that you should be enduring the spinning circle of death while watching your favorite show on YouTube TV. We’re confident you can fix your issue using one of these fixes, no matter how long it’s been going on for.

    And eventhough YouTube playback errors may be in plenty, they’re always relatively easy to fix. Unless of course, it’s YouTube TV not working where you’d have to wait for an official fix.

    That’s it from us but do let us know what solution worked for you or if you have any other we’ve not mentioned here.

    How to Fix Crunchyroll Error P-DASH-114

    Encountering error P-DASH-114 while watching your favorite anime, drama, or manga on Crunchyroll can be frustrating.

    In this guide, we will talk about common reasons for the issue and discuss practical solutions so you can enjoy your favorite shows uninterrupted.

    What does Crunchyroll Error P-DASH-114 mean? The Crunchyroll Error P-DASH-114 indicates an incomplete response from the website’s server, and the system is experiencing some issues.

    • An outdated operating system or browser could cause this problem.
    • Weak internet connection.
    • Browser cache and cookies.
    • Antivirus software or ad blocker interference.

    How do I fix the Crunchyroll Error P-DASH-114?

    Before proceeding with any steps to fix this error on Crunchyroll, go through the following preliminary checks:

    • Check the Crunchyroll server status on Downdetector. If it is down, wait for some time, then try again.
    • Verify if you have a stable internet connection, and log out & log in to the app.
    • If you are getting the error on the website, try the app; if the error is on the app, try the website in the browser’s incognito mode.
    • Turn off your computer, disconnect your router from the power source, wait for 5 minutes, then reconnect the computer and router.
    • Ensure your browser is up to date or try using a different browser.

    1. Clear the browser cache and cookies

    1. Launch your preferred browser; we are taking the example of Google Chrome. Locate and click the three dots icon, and select Settings.Settings CHrome  Settings CHrome -  Crunchyroll Error P-DASH-114
    2. Click Privacy & Security from the left pane, then click Clear browsing data.Settings 2 - clear browsing data
    3. For Time range, select All time from drop-down list, and place a checkmark next to Cookies and other site data, & Cached images and files.Clear data
    4. Click Clear data.
    5. Wait a while; once the process is complete, you will see the Privacy & Security section again.
    6. Relaunch the browser and try again.

    Clearing the browsing data will refresh the website and help you fix issues like Error Code 1020 Crunchyroll Access Denied; read this guide to learn more about it.

    2. Disable the extensions

    1. Launch your preferred browser; here we are taking the example of Google Chrome. Locate and click the three dots icon, select Extensions, then Manage Extensions.Extensions chrome -Crunchyroll Error P-DASH-114
    2. Locate Ad-blocker and VPN extension, and click the toggle switch to disable them.
    3. Relaunch the browser and try to open Crunchyroll.

    If you have a VPN app, you must temporarily disable that; if you have an inbuilt VPN connection, you can check out this guide to learn the steps.

    3. Turn off the Windows Security temporarily

    1. Press the Windows key, type windows security, and click Open.Windows Security open Windows key -Crunchyroll Error P-DASH-114
    2. Go to Virus & threat protection, and select Manage settings.Manage settings
    3. Locate the Real-time protection option and toggle off the switch next to it.Real time protection off
    4. Click Yes on the UAC prompt to confirm.

    If, after disabling antivirus software, you can access Crunchyroll, then consider adding it as an exception to the software; follow these steps:

    1. On the Windows Security app, Go to Virus & threat protection, and select Manage settings.Manage settings
    2. Select Add or remove exclusions.Add exclusions -Crunchyroll Error P-DASH-114
    3. Click Yes on the UAC prompt.
    4. Now, click the Add an exclusion button, then select File.Add an exclusion
    5. Browse the computer to locate the .exe file of Crunchyroll. You can look for it in Program Files on your system drive; once located, select it and click Open to add the app to the exclusion list.

    4. Clear the Watch List

    1. Launch your preferred browser and log in to your account.
    2. Click Menu, then select Queue.
    3. Navigate to My Queue, then select the shows list and delete them.
    My Queue - Crunchyroll Error P-DASH-114

    If you are using the app, then follow these steps:

    1. Launch the mobile app and navigate to My Account.
    2. Go to My Lists, select the show from the list, and click Remove from WatchList.Remove from Watchlist - Crunchyroll Error P-DASH-114
    3. Relaunch the app to see if the issue persists.

    5. Delete the app cache

    1. Press Windows + I to open the Settings app.
    2. Go to Apps, then select Installed apps.Apps - Installed apps -  Crunchyroll Error P-DASH-114
    3. Locate Crunchyroll, click the three dots icon, and select Advanced options.Crunchyroll, click the three dots icon, and select Advanced options
    4. Go to the Reset section and click the Reset button to clear the app cache.Reset

    Remember, this action will delete app data from this device, which means you must sign in to the app again, so keep the password handy.

    Resetting the app cache can also fix issues like internal server errors on the Crunchyroll app; read this to learn more about it!

    6. Check for the app updates

    1. Press the Windows key, type microsoft store, and click Open.Microsoft Store - Crunchyroll Error P-DASH-114
    2. Go to Library, then click Get updates.
    3. Scroll through the list, look for Crunchyroll, and click Update.Update the app
    4. Wait for the updates to download & install, and restart your PC if prompted.

    Updating the app can help you fix common glitches and errors like Crunchyroll error 502 on all devices, including Android, iOS, and Mac; read this guide to learn the steps.

    7. Reinstall the Crunchyroll app (Last Resort)

    1. Press Windows + I to open the Settings app.
    2. Go to Apps, then select Installed apps.Apps - Installed apps - Crunchyroll Error P-DASH-114
    3. Locate Crunchyroll, click the three dots icon, and select Uninstall.Advanced options - Uninstall
    4. Click Uninstall again to confirm.
    5. Once the app is removed, go to the Microsoft Store and click Install to get the Crunchyroll app again.

    Now sign in using the correct credentials and enjoy the anime shows you choose. Avoid using the same account to stream the shows on multiple devices simultaneously to prevent bandwidth strain.

    If nothing worked for you, the chances are there could be issues with your Crunchyroll account; contact the company’s customer support for further assistance.

    Did we miss a step that helped you? Don’t hesitate to mention it in the comments section below. We will add it to the list!

    Solved: YouTube Locate is Not Working

    If YouTube TV cannot find your current location and throws you an error every time you try to access the content in your region, this guide can help!

    We will discuss the common reasons for the issue and practical solutions to fix it so you can watch the content without any trouble.

    Why does YouTube TV not recognize my location?

    • The location settings of the device are disabled.
    • Browser cache and cookies could be responsible.
    • Browser extension interference.
    • Outdated browser or device OS.

    What can I do if YouTube can’t verify my location?

    Before proceeding with any steps to fix YouTube TV not recognizing the location, go through the following preliminary checks:

    • Check if your internet connection works fine, and try using a different browser.
    • Ensure you are using the same email address you used to sign up for the subscription, and sign out & sign back into your YouTube TV app.
    • Turn off your computer, disconnect your router from the power source, wait for 5 minutes, then replug the computer and router, and update your Windows OS.
    • Switch to a different account and wait for a few minutes, then switch back to the main one.
    • Select the US server location on the VPN service if you are in a different physical location.

    1. Turn on the location services for the YouTube TV app

    1. Press Windows + I to open Settings.
    2. Go to Privacy & security, then under App permissions, click Location.Privacy & security - YouTube Locate is Not Working
    3. Make sure the toggle button for Location services is turned on.Location services
    4. Look for the YouTube TV app and tap the toggle button to turn the location on.

    2. Verify your location

    1. On your mobile device (Android or iOS), launch your preferred browser and go to this verification site.
    2. Ensure the location services are enabled, then follow the on-screen instructions to confirm the current location.

    3. Update your Current Playback Area

    1. Launch your preferred browser, and sign in to the YouTube TV website with the correct email address.
    2. Go to the Profile icon and select Settings.YouTube Locate is Not Working -Profile icon and select Settings
    3. Click the Area option from the left pane, and click Update.YouTube Locate is Not Working
    4. Now click Allow on the pop-up to access the location of the device.Allow
    5. If you are on TV, it might ask you to go to the Verification site, open the browser on your mobile device, and let it access the location. However, on your computer, there is no need for the additional step.

    Keeping your home area updated can help you watch the local channels of your region and avoid YouTube TV Playback errors.

    4. Clear browser cache & cookies & disable extensions

    1. Launch the browser you generally use; we are demonstrating steps using Google Chrome. Locate and click the three dots icon, then select Settings from the drop-down menu.Settings CHrome - Youtube locate not working
    2. Click Privacy & Security, then select Clear browsing data.Settings 2 - Clear browsing data
    3. For Time range, select All time from drop-down list, and place a checkmark next to Cookies and other site data, & Cached images and files.
    4. Click Clear data.Clear data
    5. Wait a while; once the process is complete, click Extensions.Manage Extensions - YouTube Locate is Not Working
    6. On the next page, click Remove for the unwanted extensions and toggle off the switch next to others to disable them temporarily.Remove
    7. Relaunch the browser and check if the issue persists.

    Clearing the browser cache and cookies will remove all pre-store data, refresh the website, and help you fix issues like can’t click on YouTube videos.

    5. Clear the app cache (Applicable if using the YouTube TV app)

    1. Press Windows + I to open Settings.
    2. Go to Apps, and click Installed apps.YouTube Locate is Not Working
    3. Locate the YouTube TV app, click the three dots icon, then Advanced options.Advanced options - YouTube Locate is Not Working
    4. Go to the Reset section and click the Reset button to clear the app cache.Reset

    Once done, all the data related to the app will be deleted, and you need to sign in to the app again, so keep the credentials handy.

    Removing the app data cache and using a stable internet connection can help you maintain good streaming quality; read this guide for more tips.

    6. Check for app updates

    1. Press the Windows key, type microsoft store, and click Open.Microsoft Store - YouTube Locate is Not Working
    2. Go to Library, then click Get updates.
    3. Scroll through the list, look for YouTube TV, and click Update.Update the app

    7. Reinstall the app

    1. Press Windows + I to open Settings.
    2. Go to Apps, and click Installed apps.YouTube Locate is Not Working
    3. Locate the YouTube TV app, click the three dots icon, then Uninstall.Advanced options - Uninstall
    4. Click Uninstall again to confirm the action.
    5. Now, go to the Microsoft Store and download the YouTube app again.

    How can I change my current playback area on YouTube TV?

    You can follow the steps mentioned in Method 3 to update your current playback area on your computer in a browser.

    The steps to perform this action on a mobile app are similar; look for the relative options. If you use a mobile device to access YouTube TV, you can follow the above-mentioned methods to fix the error.

    Remember that you can only change your home area twice a year; to update it, you must be physically present in the same region to avoid Outside your home area error message.

    While traveling, you can view local programs from different regions but not from your home area, and you can’t record local programs from other regions.

    In case you are still facing the issue, go to the YouTube Help Center and click Contact Us for further assistance.

    If you have any questions or suggestions about the subject, feel free to mention them in the comments section below.

    Spiderman 2 Galvanize not Working: Tested Quick Fix

    We were playing Spiderman 2 in Windows Report labs and as soon as the Galvanize prompt appeared on the screen in the Set Things Right mission, the game froze. Reloading didn’t work but the WR gaming team came up with a quick solution.

    Why is Spiderman 2 Galvanize not working? Galvanize doesn’t work in Spiderman 2 because there is a glitch in the UI of the prompt that causes the game to freeze.

    How do I fix the Spiderman 2 Galvanize not working issue?

    1. Go to the game menu.
    2. Load the game from the latest checkpoint in the Set Things Right mission.
    3. Press L1 + X immediately after the game loads.

    After that, you will be able to use Galvanize even after cooldown because the game won’t freeze up anymore.

    As it’s a UI prompt glitch, we’re expecting for it to be fixed soon so if you didn’t get to the Set Things Right mission, update the game and you probably won’t need this guide anymore.

    More info about Galvanize on Spiderman 2

    Galvanize is triggered with the L1 + X combination on your controller, and it’s a new action in the Set Things Right mission on Spiderman 2.

    With Galvanize you will be able to punch an enemy into the air, additionally shooting bolts of electricity at other enemies. If you continue to hit them, the action will increase its intensity.

    Other known Spiderman 2 bugs/glitches

    • Spiderman 2 installation stuck at 36% – This happens when you install the game from a physical disc. Try installing the game in safe mode or offline to fix this issue.
    • Can’t install Spiderman 2 on SSD – Move the game to the system storage if you’re having this problem.
    • Spiderman 2 crashing – We’ve encountered this problem while the console is overheating. So, that is mainly a console issue. Change its position and try to clean it from dust and debris.

    So, hopefully, by using this guide, you got rid of the Spiderman 2 Galvanize not working issue and now you’ve completed the mission.

    If you’re a Spiderman fan, check out our selection of online Spiderman games you can play on your browser.

    You might also be interested in our list of the most popular triple-A titles on Xbox.

    For any other questions, feel free to use the comments section below and let us know about them.

    Error: /usr/bin/xcodebuild Failed With Return Code: 65 [Fix]

    Many developers encountered ## error error /usr/bin/xcodebuild failed with return code 65, and in today’s guide, we’re going to show you few methods you can use to fix this error.

    What is error code 65 in Xcode build?

    This error is usually caused by address code signing issues, your project settings or problems with dependencies.

    How do I fix error: /usr/bin/xcodebuild failed with return code: 65?

    1. Fixing the address code signing issues

    1. Verify if your Apple Developer Program membership is active, then go to Project Settings and double-check your signing certificate for your project.
    2. In Project Settings, also make sure that the provisioning profile is the same as the one from Apple Developer Account. You may also refresh the provisioning profile in Xcode to make sure.
    3. If the Error /usr/bin/xcodebuild failed with return code 65 is still present, revoke your signing certificate and create a new one.

    The address code signing is the main problem when getting the return code 65 in Xcodebuild so make sure that everything is alright with the membership and signing certificate.

    2. Fixing incorrect project settings

    1. Go to the General tab in the Project Settings of your project, then locate Bundle Identifier and see if it matches the one in your Apple Developer Account.
    2. On the same General tab, check the Deployment Target. That is the lowest iOS version your app supports, and it must not be higher than the one on your simulator.
    3. Check all the options in the Project Settings and verify if you have the same in the Apple Developer Account.
    4. After you have made all the changes, clean and rebuild your project in Xcodebuild.

    After doing that, check if ## error error the process ‘/usr/bin/xcodebuild’ failed with exit code 65 is gone.

    3. Running tests individually and debugging

    1. Run the tests individually, it should help you pinpoint the problem.
    2. Next, use the debugger to find the cause of the issue.
    3. You might have to repeat these steps several times to pinpoint the cause of the problem.

    4. Cleaning the Build folder and checking for errors

    1. In Xcode, go to the Product menu and select Clean Build Folder to delete all the files from your previous builds.
    2. Now, go to Product again and select Build to create a clean build.
    3. Check if the error persists.

    5. Uninstall and reinstall Xcode

    1. Go to the Applications folder.
    2. Locate Xcode and move it to the Trash bin.
    3. Empty the Trash bin.
    4. Next, run the installer again or download it from Apple Developer Xcode page.

    6. Resetting the iOS Simulator

    1. Go to Xcode, select Open Developer Tool, and choose Simulator.
    2. Click on Device and select Erase All Content and Settings.
    3. Once you reset the Simulator to default settings, rebuild your project and see if you still get the error.

    7. Fixing the Libraries and Dependencies

    1. Check if the dependencies are compatible with both Xcode and the iOS version you’re developing for.
    2. If necessary, check and update the dependencies configuration.
    3. Lastly, rebuild your project.

    Tips on how to avoid the /usr/bin/xcodebuild failed with return code 65 error

    1. Keep your Xcode updated to avoid any bugs or lack of functionality.
    2. Clean your build regularly to remove the clutter that can cause issues with your code.
    3. Use Git to control any changes in your code and revert the build whenever problems occur.
    4. Review your dependencies and test your build as often as possible.

    ## error error /usr/bin/xcodebuild failed with return code 65 can be tricky to fix, since it’s a developer error, but hopefully, this guide managed to help you.

    If you’re an advanced coder, you might also want to install the Xcode command line tools.

    You may also be interested in the best cross-platform code editors that might offer additional help.

    For any other suggestions on how to fix this error, feel free to use the comments section below and let us know.

    Southwest Error 500120309: How to Fix it

    The Southwest Airlines app is known to throw errors from time to time, but Error: 500120309 is rather tricky to troubleshoot, given the surprising absence of any reliable information on the web.

    The error message, encountered on all three: iOS, Android, and the official website, reads, Something went wrong, please try again. Error: 500120309.

    What is error 500120309 on the Southwest app?

    This is a sign-in error. While most couldn’t log in and received the error message, others were kicked out of the session within minutes of signing in, with the same Error: 500120309 appearing. Here are a few reasons you are getting the error:

    • Missing critical permissions
    • Issues with the app cache
    • App or website is blocked on the network
    • The servers are facing an outage

    How do I fix Southwest error 500120309?

    Before we start with the slightly complex solutions, try these quick ones first:

    • Restart the device that’s throwing the error. Also, if you get it on a website, switch to the browser’s incognito/private mode.
    • Verify whether Southwest Airlines is facing a server outage using a service like Downdetector. If that’s the case, try again in some time.
    • Switch to another network. If using Wi-Fi, try mobile data, and vice-versa.
    • Make sure your network doesn’t block access to the Southwest Airlines’ server. A few reported this issue on public networks.
    • Check for any pending app and phone software updates and install them.

    If none work, head to the fixes listed next.

    1. Grant all permissions

    Your primary approach should be to grant all permissions to the app when faced with Southwest Error: 500120309 on iPhone or Android. It should be able to access the network, location, and any other permissions listed.

    Southwest on iPhone

    For the web browser, make sure to grant the critical permissions under Site Settings. These are specific to every website.

    2. Clear the app data

    2.1 On Android

    1. Open the phone settings, and select Apps.
    2. Now, tap on Southwest and then choose Storage.storage
    3. First, tap on Clear data and wait for the process to complete. Then, tap Clear cache.clear data to fix southwest error 500120309
    4. Finally, launch the app and check for improvements.

    Clearing the cache and app data also helps when you can’t sign into OneDrive on Android.

    2.2 On iPhone

    iPhones don’t offer a built-in method to clear the app cache. You can offload the app but will be forced to reinstall it. The only benefit is that the critical app is retained.

    3. Reinstall the app

    3.1 On Android

    1. Locate Southwest on the app screen, tap and hold it, and choose Uninstall from the flyout menu.uninstall app
    2. Tap OK in the confirmation prompt that appears.
    3. Once done, restart the Android device.
    4. Now, download the Southwest Airlines app from the Google Play Store.

    3.2 On iPhone

    1. Hold the Southwest app on the homescreen, and select Remove App.remove app
    2. Tap on Delete App.delete app to fix southwest error 500120309
    3. Finally, tap Delete in the confirmation prompt.
    4. Restart your iPhone, and download Southwest from the App Store.

    4. Access the website instead

    If you are only encountering the Southwest Error 500120309 on a mobile phone, open the Southwest website instead.

    For most users, the website worked fine even when the app was throwing errors or not working altogether.

    5. Contact Southwest support

    When nothing else works, the last option is to context Southwest support. There are several channels available, including a phone number and email address, or you could even send them a letter.

    If it’s a bug in the installed version of the app or a server outage, they should be able to provide a timeline as to when things will be up and running.

    As you see, there aren’t many fixes available, given the low instances of the error. But with a basic understanding of the Southwest Error 500120309 meaning and the solutions, you should be able to sign in!

    Remember, most app issues are fixed this way, including when the Threads app is not working.

    For any queries or to share what worked in your case, drop a comment below.