Fix: Edge cookies get deleted after restarting

Posted on March 9, 2023October 4, 2023 by Rafly Gilang

Microsoft has been paying more and more attention to its often-overlooked web browser Edge. Not only did it integrate the ChatGPT-powered Bing search engine into the browser’s ecosystem, but the tech giant also launched a reward initiative to keep people engaged.

But what’s going to happen if your cookies on Edge get immediately cleared every time you restart the browser?

It can be an annoying experience. After all, we rely on these cookies to store our data on the internet and let it remember our information temporarily so we don’t lose track every time we want to revisit the site again.

Moreover, if your cookies get deleted, you’ll need to re-enter all login credentials (like username and password) each time you visit a new website. While it may be good for your privacy especially if you’re using a public desktop, it can be irritating if you’re working on a personal PC.

If you relate to this situation, say less. Here, we’ve prepared three simple workarounds you can try,

How to fix Edge cookies getting deleted after restarting

1. Reset

1. With your Edge browser open, click on the three dots on your upper right ➜ Settings.

2. Click Reset settings ➜ Reset.

2. Enable third-party cookies

1. With your Edge browser open, click on the three dots on your upper right ➜ Settings.

2. Go to Cookies and site permissions ➜ Manage and delete cookies and site data.

3. Make sure the Block third-party cookies option remains unticked.

3. Disable automatic browsing data deletion

1. With your Edge browser open, click on the three dots on your upper right ➜ Settings.

2. Go to Privacy, search, and services ➜ Choose what to clear every time you close the browser.

3. Make sure the Cookies and other site data option remains unticked.

Have you ever had this problem before? If you do, feel free to let us know in the comments!

Twitter Error 467: How to Quickly Fix It

Posted on March 9, 2023October 21, 2025 by Srishti Sisodia

Twitter is one of the most popular social media platforms and encountering errors while using the platform is more common than you think. One such error is Twitter Error Code 467. This issue occurred when the user tried to click links in tweets to third-party websites.

Due to this issue, Twitter is down globally, and users cannot access social networking sites.

The error is an HTTP response status code that implies that the request was denied as the user account is restricted or locked. In this guide, we will discuss workarounds to fix the issue. Let’s get started!

What causes Twitter error 467?

There could be various reasons behind the error code; some of the common ones are mentioned here:

Account suspended – Your user account can be suspended if you have not abided by Twitter’s terms of service. Ask your friends, if they can see your account or posts to check if the account is suspended
Account locked – If you are getting is error code, chances are your user account is locked due to suspicious activities.
Twitter server down – If Twitter is down, you won’t be able to access the platform. Wait for a few hours for Twitter to resolve the issue.

What can I do to fix Twitter error 467?

Restart your computer.
Go to the Twitter website and log in to your user account.
If this doesn’t work, use a different browser and try to log in again.
Check your mailbox to see if you can find a suspension notification email.
Still can’t access your account, wait a few hours and try to log in again.
Keep a check on the Twitter Support handle to stay updated.

If none of these things worked for you, then the problem might be on Twitter’s end. It would be best if you waited for the company to fix the issue.

Having trouble signing in too? Follow these focused steps to get back into your account: Twitter X not logging in.

Still running into odd behavior after resolving the error? Related UI issues can also block interactions. See our guide on Twitter Show Button Not Working for additional fixes.

If you have questions or concerns, please mention them in the comments section below.

WiFi Keeps Disconnecting on Windows 11: How to Stop It

Posted on March 9, 2023October 4, 2023 by Srishti Sisodia

Many users faced issues when upgrading from Windows 10 to Windows 11. One of the most common ones is the WiFi keeps disconnecting issue. This guide will explain the expert-recommended methods to fix the problem after discussing the causes. Let’s get started!

What causes the WiFi to keep disconnecting on Windows 11?

There could be various reasons for WiFi not connecting issues; some of the common ones are:

Network interference – WiFi signals can be interfered with by other devices with the same frequencies, and network inconsistency could cause the issue. You can fix it by using the Internet connection troubleshooter.
Outdated network driver – You can face this issue if you have an outdated or old network driver. To fix it, you can update the network driver.
Inconsistent network parameters – If you usually switch between WiFi devices, you may have conflicting data collected due to HCP and TCP/IP parameters.
Corrupted system files – If your system files are damaged or corrupted, then you might face this issue. You need to repair the system files.
Network adapter glitch – If there is an inconsistency with the adapter you are using to establish the WiFi connection, you might have this issue.
DNS consistency – You may face this issue if the DNS is inconsistent. You can fix the issue by flushing DNS.

What can I do if the WiFi keeps disconnecting on Windows 11?

Before moving to the actual troubleshooter steps, you can go through these preliminary checks:

Restart your router.
Turn off and on the Airplane mode.
Forget and reconnect the WiFi network.

1. Network Reset

Press Windows + I to open the Settings app.
Go to Network & Internet, and click Advanced network settings.
Now click Network reset.
Under Network Reset, select Reset now.
Follow the onscreen instructions to complete the process.

2. Run a troubleshooter

2.1 Run Internet connections troubleshooters

Press Windows + I to open Settings.
Go to System, and click Troubleshoot.
Now click Other troubleshooters.
Locate, click Internet connections, and click Run.
Follow the onscreen prompts to complete the process.
If this doesn’t work, follow the next method.

2.2 Reset Network

Press the Windows key, type CMD, and click Run as administrator.
Copy and paste the following commands one by one and press Enter after every command: netsh winsock reset ipconfig /release ipconfig /renew ipconfig /flushdns
Restart your computer and check if the issue persists.

3. Reset TCP/IP and DHCP parameters

Press the Windows key, type CMD, and click Run as administrator.
Type the following commands and press Enter: netsh int ip reset c:\resetlog.txt
Then, reboot your computer and check if the issue persists.

4. Reinstall the Network adapter

Press Windows + R to open the Run dialog box.
Type devmgmt.msc and click OK to open Device Manager.
Locate and double-click the Network adapters to expand it.
Select, right-click the adapter, and click Uninstall driver.
Once done, click Action, then select Scan for hardware changes.
Restart your computer to confirm the changes.

5. Check the WiFi power management setting

Press Windows + R to open the Run dialog box.
Type devmgmt.msc and press Enter to open Device Manager.
Locate and double-click Network adapters to expand it.
Right-click on the adapter and select Properties.
Switch to the Power Management tab, and place a checkmark next to Allow the computer to turn off this device to save power.
Click OK.

6. Connect automatically to the WiFi network

Press Windows + A to open the Action Centre.
Click on the arrow icon next to WiFi.
Right-click the network and open Properties.
On the WiFi settings page, place a checkmark next to Connect automatically when in range.
Also, select Private network as the Network profile type.

7. Use the Services

Press the Windows + R to open the Run console.
Type services.msc and press Enter to open Services.
Locate and double-click the WLAN AutoConfig service.
For Startup type, choose Automatic, and Services status, click the Start button.
Click Apply and OK.

7. Perform in-place upgrade

Go to Windows 11 download page. Locate Download Windows 11 Disk Image (ISO) for x64 devices, and select Windows 11 (multi-edition ISO).
Click Download.
Choose the product language option, select English or your preferred language, and click Confirm.
Click Download.
Locate and right-click the downloaded file, and click Mount.
Double-click Setup.exe to run.
Click Yes on UAC if prompted.
On the Install Windows 11 wizard, click Next.
Now on the next page, click Next.
Wait for the program to check for available space. On the Ready to install screen, choose Keep personal files and apps.
Click Install and follow the onscreen instructions to complete the process. Your computer will restart a few times, eventually leading you to the lock screen.

So, these are the methods you follow to fix the WiFi keeps disconnecting issue on Windows 11. You may also come across a similar issue where your Wi-Fi connection drops when using a second monitor, so do not hesitate to check out our expert article on the same.

Don’t forget to let us know what worked in the comments section below.

Rtwlane6.sys: How to Fix This Blue Screen Error

Posted on March 9, 2023July 27, 2025 by Srishti Sisodia

The rtwlane6.sys blue screen error is one of the common BSOD errors on Windows OS. This error is associated with the Realtek wireless driver, which is responsible for managing wireless network connections on a computer.

When the driver encounters a problem, it can cause the system to crash, hence the BSOD error.

This guide will discuss some available methods to troubleshoot and resolve the issue right after examining the causes.

What causes the rtwlane6.sys blue screen error?
What can I do to fix the rtwlane6.sys blue screen error?

What causes the rtwlane6.sys blue screen error?

This blue screen of death error occurs due to various reasons; some of the common ones are:

Outdated drivers – If the wireless Lan device driver is corrupted or outdated, it can cause this BSOD error. You need to update the device drivers to fix it.
Third-party software interference – If there is a conflict between different drivers or software, you might face this error. To fix the problem, you might have to uninstall third-party software.
Hardware issues – If the hardware component of your computer is damaged, especially the wireless LAN card, you might face this issue.
Malware infection – If your computer is infected with malware or viruses, then you might get a lot of errors, including a BSOD error. You need to run a malware scan to find and remove virus from the computer.

What can I do to fix the rtwlane6.sys blue screen error?

Before moving to the troubleshooting steps, make sure you go through these preliminary checks:

Restart your computer.
Scan your computer for malware infection.

1. Update/Reinstall the device drivers

1.1 Update drivers

Press Windows + R to open the Run console.
Type devmgmt.msc and press Enter to open Device Manager.
Go to the Network adapters and select the Wireless LAN driver.
Right-click on it and select the Update driver.
Click Search automatically for drivers.
Follow the onscreen instructions to complete the process. Restart your computer.

If you’re looking to ease this procedure even more, you can use an automatic program to detect all outdated or faulty drivers and update them with the newest options from its database.

⇒ Get Outbyte Driver Updater

1.2 Reinstall drivers

If updating the drivers didn’t help, then go to Device Manager.
Expand the Network adapter, right-click the Wireless LAN card, and select Uninstall driver.
Go to Action and click Scan hardware for changes.
Follow the onscreen instructions to complete the process.

2. Run a memory diagnostic tool

Press the Windows + R to open the Run command.
Type mdsched.exe and press Enter to open the Windows Memory Diagnostic tool.
Click Restart now and check for problems.
The diagnostic tool will run, and your computer will restart.

3. Use the Command Prompt

Press the Windows key, type CMD, and click Run as administrator.
Type the following command to repair system files and press Enter: sfc /scannow
Copy and paste the following command one by one and press Enter after every command: DISM /Online /Cleanup-Image /CheckHealth DISM /Online /Cleanup-Image /ScanHealth DISM /Online /Cleanup-Image /RestoreHealth
Restart your computer.

4. Run Error checking on the disk

Press Windows + E to open Windows Explorer.
Go to This PC, select and right-click the drive, and choose Properties.
On the Tools tab, under Error checking, click Check.
Click Scan drive.
Follow the onscreen instructions to complete the process.

5. Restore your system to the previous version

Press the Windows key, type Control panel, and click Open.
Select View as Large icons and click Recovery.
Click Open System Restore.
Select Choose a different restore point in the System Restore window and click Next.
Select the restore point and click Next.
Click Finish to let your system restore to its previous version.

6. Create a user account profile

Open Command Prompt with admin rights using the steps in method 3.
Type the following commands one by one and press Enter: net user "account name" /add net localgroup administrators "account name" /add
Close the Command Prompt and log out the current user.
Now select the newly created user account and log in.

7. Perform the in-place upgrade

Go to Windows 11 download page. Download Windows 11 ISO and select Windows 11 (multi-edition ISO).
Select the product language option, choose English or your preferred language, and click Confirm.
Click Download.
Select and right-click the downloaded file, and click Mount.
Click Setup.exe.
Click Yes on UAC if prompted.
On Install Windows 11 dialog box, click Next.
On the next page, click Next.
Wait for the program to check for available space. On the Ready to install page, select Keep personal files and apps.
Click Install and follow the onscreen instructions to complete the process. Your computer will restart a few times, eventually leading you to the lock screen.

So, these are the methods to follow to fix the rtwlane6.sys blue screen error. Try them and let us know what worked in the comments section below.

How to Defrag Windows 10 & Improve Your PC’s Performance

Posted on March 9, 2023October 4, 2023 by Srishti Sisodia

As you use your computer, files become fragmented and scattered across the hard drive, which makes it hard for your PC to access them quickly. This is one of the most common reasons for a slow-running computer.

Fortunately, you can use defragmentation to rearrange fragmented data and improve your PC’s performance. In this guide, we’ll show you how to defrag Windows 10 to keep it running smoothly.

How can I defrag Windows 10 and improve PC performance?

1. Use the Command Prompt

Go to the search bar, type CMD, and click Run as administrator.
Click Yes on the UAC prompt.
Type the following command, replace C with the drive you want to defrag, and press Enter: defrag C:

2. Use the Disk Defragmentation tool

2.1 Defrag manually

Go to the search bar, type Control Panel, and click Open.
Select View by Category and click System and Security.
Go to Administrative tools.
Click Defragment and Optimize Drives to open it.
Choose the disk drive you want to optimize.
Select the Optimize button.
Follow the onscreen instructions if prompted.

2.2 Run defrag automatically

You can also schedule the disk optimization for the future; open Defragment and Optimize Devices, and click Change settings on the Optimize Drives window.
Select the Frequency, and for Drives, Click Choose.
Choose the Drives from the next window.
Click OK.

3. Use the Safe Mode

Press the Windows key + R to open the Run dialog box.
Type msconfig and click OK to open System Configuration.
Go to the Boot tab, locate Boot options, and place a checkmark next to Safe boot.
Select the Minimal option, click Apply, and OK.
You will be prompted to restart your computer in Safe mode.
Click the Start menu, type Defragment and Optimize Drives and click Open.
Select the drive you want to defragment and click the Optimize button.
The defragmentation process will take some time to complete.
Once done, go to System configuration, switch to the Boot tab, uncheck Safe boot, click Apply, then OK. Restart your computer in normal mode.

4. Use the Settings app

Press Windows + I to open Settings.
Go to System.
Click Storage, and select the Optimize Drives option.
Select the drive and click the Optimize button.
Wait for the process to get complete.

So, these are the methods you can use to defrag your Windows 10 computer. Try them and let us know what worked for you in the comments below.

Discord Music Bot Lagging: 4 Easy Ways to Permanently Fix it

Posted on March 9, 2023September 27, 2024 by Tashreef Shareef

At times, the Discord music bot can start lagging during the chat. This issue seems to be occurring due to latency issues caused by Discord’s voice servers. According to the bot developers, this problem can be resolved by switching your voice server region to a different one.

In this article, we take a look at the steps that you can perform to troubleshoot the Discord music bot lagging issue. What can I do if the Discord music bot is lagging?

How do I fix the Discord bot if it’s lagging?

1. Check your Internet connection

Press Windows + I then navigate to Network & Internet to check your Internet connectivity.
Here, check whether it says connected under your network connection, otherwise click on Wi-Fi and connect to a new network.

2. Verify the Discord servers’ status

Discord’s main functions rely heavily on the server-side. When there are server problems, many of Discord’s features such as the music bot will not be able to work properly.

When this happens, it’s best to check Discord’s status page. On this page, you can see if the client is currently experiencing or has experienced server issues and if any of its services (or APIs) are affected and check if a fix has been deployed.

3. Change voice server region

Login to your Discord server and select Server Settings (marked as a gear) from the context menu.
In the Overview tab, locate the Region Override section and click make sure the Automatic option is set. This option will automatically find the best settings so you won’t experience lag.
Alternatively, you can select a server that is closest to your region and click Save Changes to apply the changes made.

Once the changes are saved, test the music bot again in the chat or stream to see if it is still lagging. In most cases, changing the server region should resolve the Discord music bot lagging issue.

Note that by changing your region, the following issues will be solved as well: Fredboat lagging, Probot lagging as well as Rythm bot lagging.

It’s a fact that the closer your physical location to a server, the lower latency you will experience. However, only you having a great ping is not sufficient.

Your friend or others on the discover should also have a decent ping to have a lag-free experience. If the users on the Discord servers are from two different or even multiple regions, it is better to find a middle ground between you and your friends with the Automatic option.

NOTE

Keep in mind that u003cspan style=u0022font-size: revert;color: initialu0022u003eto be able to change the voice region, you must be either a server owner or have a role with u003c/spanu003eu003cstrong style=u0022font-size: revert;color: initialu0022u003eManager Server u003c/strongu003eu003cspan style=u0022font-size: revert;color: initialu0022u003epermissions enabled. Once you have the permission, u003c/spanu003eyou can follow the above steps.

4. Check your hosting service

If you are hosting a Discord music bot yourself, check if it is putting a strain on your server. When you try to upload a lot of things at once, the resources allocated to your music bot may take a hit.

This leads to stuttering and lag issues. If the issue persists, consider trying any other Discord music bot. Changing it should help you overcome the lagging issues caused by bot limitations.

The Discord music bot lagging issue usually occurs due to server latency. It can be resolved by changing the voice server region.

For self-hosted music bots, you can also check the hosting resources and upgrade to avoid any strain on the server.

Discord music bot lagging only for me

Besides checking your Internet connection and changing it to a faster one, you should close the unnecessary processes that are running in your background. Thus:

Press Ctrl + Shift + Esc in order to open Task Manager.
Then, under the Processes tab, look for apps that you think are redundant to run at the moment and click on them in order to choose End Task.

You might be familiar with the fact that when you make a video call and you have a lot of processes running in the background, the audio will crackle since the app isn’t getting the appropriate resources.

The same principle applies in this scenario. The music bot may become choppy if you do not allocate a significant portion of your system’s resources to Discord. These resources include your random access memory (RAM), central processing unit (CPU), graphics processing unit (GPU), and network.

Why is my Discord music bot lagging?

If you’re wondering why the Discord music bot sounds bad, glitchy or distorted, then rest assured as you are not alone in this situation. Many users claimed that Groovy’s audio disappear for a few seconds or lagged.

First, you should know that the issue is mainly related to the Discord voice server region, thus you’ll need to adjust it later on.

Moreover, a poor Internet connection can get you into this trouble. The music bots stream at bitrate and this is different from your voice channel. In case you use a weak Internet connection, you may experience latency while streaming audio.

Last, but not least, the packet loss is another reason that explains why the Discord music bots are not working. Keep in mind that when the live data or the audio is transferred over the Internet, you might notice the packet loss.

The data is transferred in small chunks and is called Packets, and if any of this won’t arrive properly this got lost and therefore is named Packet Loss.

If Discord outbound packet loss, make sure you check our dedicated guide to fix it in no time. This being said, in today’s article, we’re going to show you the best possible solutions to easily solve all the above problems.

How can I find the right Discord music bot?

➡ Rythm

Rythm is one of the most reliable bots you can find and makes it possible for you and all of your friends to listen to your favorite music together. It’s compatible with several music channels, such as Twitch, YouTube, and SoundCloud. Moreover.

Moreover, this bot is 100% stable, meaning you won’t experience lags in your music unless it’s an issue on your side.

➡ Groovy

The most significant benefit of Groovy is that it’s easy to use. It also supports various customization options, such as showing lyrics and shuffling. Overall, it’s an outstanding addition to your Discord server.

➡ FredBoat

FredBoat is very similar to Groovy. The bot is simple and has many valuable features. For example, it allows you to determine who changes the playlists.

If you’re interested in finding more options, do not hesitate to take a look at the best Discord music bots.

In case the Discord music bot is lagging, these are the best solutions you can try. We suggest trying them out one by one to tackle the problem.

As several users claim, there are also issues with Discord not playing any sounds in their browser. If Discord is not playing any sounds in your browser, check out our dedicated guide right away.

Have the above tips and tricks been useful to you? Don’t hesitate to let us know in the comments area below.

SSD Not Showing Up: How to Get It Detected

Posted on March 9, 2023September 7, 2025 by Srishti Sisodia

If your SSD is not showing up in BIOS or disk management, this guide can help. This usually happens if your SSD is not initialized or the storage controller driver is outdated. We will cover all the available methods to fix the issue right after discussing the potential causes. Let’s get started!

What causes the SSD not showing up issue?

There could be various reasons why SSD is not recognized on your computer; some of the common ones are:

Outdated storage controller driver – If the Storage controller driver is outdated or corrupted, your SSD might not show up. To fix this, you need to update the driver.
The file system is corrupt – If the file system on your computer is corrupt, then your SSD might not get recognized by your computer. You need to format SSD with NTFS.
SSD initialized incorrectly – If your SSD is not initialized properly, you might face this issue. You need to initialize the SSD again.
Memory issues – If your SSD has memory issues, it might not show up. To fix this, you must run a memory diagnostic tool on your computer.
Issues with the operating system – If your OS has problems with SSD, it might not detect your SSD. You need to check if it appears in BIOS.

What can I do if the SSD is not showing up?

Before engaging in advanced troubleshooting steps, you should consider performing the following checks:

Replace the data cable.
Remove other drives from your computer.
Check if the BIOS detects SSD.

1. Run the CHKDSK command

Press Windows + E to open Windows Explorer.
Go to the drive, right-click on it, and select Properties.
Switch to the Tools tab, locate Error checking, and click Check.
On the next window, select Scan drive.
Follow the on-screen instructions to complete the process, then restart your computer.

2. Run the Windows Memory diagnostic tool

Press Windows + R to open the Run console.
Type mdsched and press Enter to open Windows Memory Diagnostic.
Click Restart now and check for problems (recommended).
Your computer will restart, and Windows Memory Diagnostic will perform a test automatically.

3. Configure the SSD settings in BIOS

Press Windows + I to open the Settings app.
Go to Update & security.
Click Recovery, then locate Advanced startup and click Restart now.
On Choose an option screen, select Troubleshoot.
Now on the Troubleshoot screen, click Advanced options.
On the Advanced options page, click UEFI Firmware Settings.
Click Restart.
Now from the next screen, choose the appropriate option to enter BIOS.
Go to Storage options, select Serial SATA, then choose SATA Configuration.
Select the IDE Compatibility Mode.
Click Exit and choose Save & exit or a similar option to save and restart your computer normally.

4. Initialize the SSD drive

4.1 Initialize the SSD

Press Windows + R to open the Run dialog box.
Type diskmgmt.msc and press Ctrl + Shift + Enter to open Disk Management with admin rights.
Locate and right-click the SSD that is not showing up and choose Initialize Disk.
On the following dialog box, choose the SSD you want to initialize and select the partition style.
Click OK to start the process.

4.2 Change SSD drive letter

Open the Disk Management tool
Right-click on the same disk and choose New Simple Volume.
On the New Simple Volume wizard, click Next.
Select the disk size next to Simple volume in MB and click Next.
For Assign the drive letter, select the drive letter from the dropdown and click Next.
Change the Volume Label and click Next.
Click Finish. The drive will format now, don’t close the window until it is done.

5. Update the drivers

Press Windows + R to open the Run dialog box.
Type devmgmt.msc and click OK to open Device Manager.
Locate and expand the Storage controllers.
Right-click on the storage controller driver and select Update driver.
On the next window, click Search automatically for drivers.
Follow the onscreen instructions to install the latest driver.
Now on the Device Manager, go to Disk drives and expand it.
Right-click the SSD and select Update driver.
Now follow the same steps mentioned for the storage controller driver.

You can also keep your drivers up to date with specialized programs, such as Outbyte Driver Updater, created to do this procedure automatically.

Outbyte Driver Updater will scan your device for outdated or faulty drivers and find the latest versions from its database as replacements.

⇒ Get Outbyte Driver Updater

6. Format SSD with NTFS

Open Disk Management using the steps mentioned in Method 4.
Select and right-click the problematic SSD drive and choose Format.
This will delete all the data on the drive.
Follow the onscreen instructions to format your drive with NTFS.

7. Run the Hardware and Devices troubleshooter

Press Windows + I to open the Settings app.
Click Update & Security.
Go to Troubleshoot and click Additional troubleshooters.
Choose Hardware and devices and click Run the troubleshooter.
Follow the onscreen process to complete the troubleshooting process.

So, these are methods that you can use to fix the SSD not working issue on your Windows computer. If you have any questions or concerns about this topic, please let us know in the comments section below.

Can’t Delete MountUUP Folder? Here’s How to Force Erase It

Posted on March 9, 2023October 4, 2023 by Srishti Sisodia

MountUUP folder typically takes 10-15 GB of storage space on your drive. It could take more space on your machine if there is a download glitch.

If the folder takes more space than it should, it is safe to delete it and retrieve space. However, if you can’t delete the MountUUP folder, we can help!

We will discuss the safest and simplest ways to delete the folder in no time. Let’s get started!

What should I do if I can’t delete the MountUUP Folder?

1. Use the Command Prompt to force delete

Press Windows + I to open Settings.
Go to System, then click Recovery.
Locate Advanced startup and click Restart now.
Windows will restart to show you Advanced startup options. On the Choose an option screen, select Troubleshoot.
Next select Advanced options on the Troubleshoot screen.
On the next screen, click Command Prompt.
Type the following commands individually to locate the MountUUP folder, and press Enter after every command. The drive letters you see here are different from the ones you see in Windows Explorer: dir C: dir D: dir E:
After locating the drive that contains the folder, copy and paste the following command to forcefully delete the folder and press Enter: rd mountuup /s /q
Wait till the commands execute, then close the Command Prompt and restart your computer.

2. Take Ownership of the folder

Locate the MountUUP folder, select, and right-click it. Choose Properties from the context menu.
On the Properties window, go to the Security tab and click the Advanced button.
Now on the next screen, click Change and click Yes on the UAC prompt.
On the Select User or Group window, select Advanced.
Click the Find Now window.
From the Search results field, double-click Administrators and click OK.
Now click OK on Select User or Group window to confirm the changes.
On Advanced Security Settings for the MountUUP folder, place a checkmark next to Replace owner or subcontainers and objects.
Click Apply and then click OK when prompted.
Again on the MountUUP Properties window, go to the Security tab, and select Advanced.
On the Advanced Security Settings window, verify if the Administrator has Full control.
Once checked, close the window and reboot your computer to save the changes.

3. Run the DISM command to dismount the existing Windows image

Press the Windows key, type CMD, and click Run as Administrator.
Type the following command to locate the mounted image and press Enter: dism /get-mountedwiminfo
Copy and paste the following command with the drive letter of the mounted image and press Enter: dism /unmount-image /mountdir: "c:\mountuup" /discard
Once the command is executed, close the Command Prompt window. Now the directory c:\mountuup is empty; you can remove the folder.

4. Delete the folder in Safe mode /clean boot environment

4.1 Run computer in safe mode

Press Windows + I to open Settings.
Go to System, then click Recovery.
Now locate Advanced startup, and click Restart now.
Select Troubleshoot on the next screen.
Next, on the Troubleshoot screen, select Advanced options.
Now on the Advanced options screen, select Startup Settings.
Select Safe mode with networking from the list or press F5 to select it.
Windows will now restart in safe mode. You can now locate and delete the folder.

4.2 Run the computer in a clean boot environment

Press Windows + R to open the Run dialog box.
Type msconfig and click OK to open the System Configuration.
Go to the Services tab, place a checkmark next to Hide all Microsoft services, and click Disable all.
Switch to the Startup tab, and click Open Task Manager.
On Task Manager, locate all the Enabled items, right-click them one by one and select Disable. Close Task Manager.
Return to the System Configuration window, and click Apply, then OK.
Click Restart to complete the process.

5. Unmount the .WIM or .VHD files

Press the Windows key, type CMD, and click Run as administrator.
Type the following command to unmount the .VHD and .WIM files and press Enter: dism /cleanup-wim
Once the command is executed, locate the MountUUP folder and delete it.

6. Remove the MountUUP folder from the Protected Folders list

Press the Windows key, type Windows Security, and click Open.
Click Virus & threat protection from the left pane.
Navigate to Ransomware protection and click Manage ransomware protection.
On the Ransomware protection page, click Protection folders.
Locate and click the MountUUP folder, and select Remove.
On the Remove protection from folder dialog box, click OK to confirm your choice.

So, these are the methods you need to follow to fix the cant delete the MountUUP folder on Windows 10. If you have questions about the issue, please mention them in the comments below.

Best QoS Software for PC [Top 7 Tools Reviewed]

Posted on March 9, 2023August 27, 2025 by Ivan Jenic

Bandwidth prioritization is generally thought of as something that happens on the router via QoS (Quality of Service). Bandwidth limiter tools analyze your network and let you control how much bandwidth you want to allocate to specific apps or processes.

The monitoring features that most bandwidth prioritization software comes with are very important in determining what sort of rules to set up.

What is internet priority software?
What is the best bandwidth prioritization software for PC?

What is internet priority software?

Due to various reasons, such as a bad connection or low-end equipment, you may experience bad loading speeds when trying to access the Internet.

You can remediate this by prioritizing your Wi-Fi or changing your QoS settings using your router’s admin controls. The more straightforward option, however, is to use dedicated software.

An Internet priority software can greatly help in this type of scenario, helping you boost speed rates and have a seamless experience.

Here’s an overview of what these types of tools offer:

Simple and easy-to-follow user interface
Prioritize bandwidth for a specific app
Capable to monitor and manage Internet speed
Monitors traffic, status, and signal strength
Basic anti-cyber attackers shield

Now that we know what to look for, let’s see which are the best tools to prioritize bandwidth on your PC.

What is the best bandwidth prioritization software for PC?

ManageEngine NetFlow Analyzer – Complete network overview

If you’re looking for a solution to monitor the bandwidth across all your network and prioritize it on certain processes, ManageEngine’s NetFlow Analyzer is just what you’re looking for.

It’s professional-grade software that not only identifies any app or process that is hogging bandwidth, but it helps you assign limitations to any of them.

Using this app, you can view bandwidth usage by application, protocol, IP address group, and more.

All the live reports can be seen on your dashboard, which is customizable to show traffic charts, bandwidth trend reports, heat maps, top lists, and any other data you may require.

Nothing will escape your eyes because you may monitor controllers, SSIDs, access points, and QoS.

And if you’re on the move, you will still get alerts on attacks and other critical events delivered to your phone so you can take care of the situation ASAP.

The beauty of NetFlow Analyzer is that it’s accessible from any browser, wherever you are, at any time.

Here are some of its top features to consider:

Manage the bandwidth on all your network devices, including controllers, SSIDs, access points, and QoS
Customizable cloud-based dashboard accessible from anywhere in the world
Get extensive and detailed reports on bandwidth consumption
View bandwidth usage by application, protocol, IP address group, and more
Very easy to implement and use

ManageEngine NetFlow Analyzer

Manage the bandwidth on your entire network on the IP level or application with this professional tool.

Free Trial Visit Website

PRTG Network Monitor – Simple implementation

Keeping an overview of your device’s network traffic is important and, with the help of this tool’s features, you can do that easily.

PRTG Network Monitor has been developed by one of the biggest network security companies in the world.

With the help of this software, you can monitor and manage the speed, load, traffic, status, or signal strength of your routers.

If at any moment your routers are not available or if your network is too loaded, the PRTG Network Monitor will alert you so you can remedy the situation.

Basically, it is a great tool to have that ensures you can fix any network issue before it becomes a big problem and disrupts your work activity.

Here are a few of its key features:

Manage the speed, load, traffic, status, or signal strength of your routers
On-premises or cloud-based monitoring hosted by Paessler
Monitor up to 1,000 devices and services
Classic on-premises deployment

PRTG Network Monitor

Your best option of bandwidth monitor to manage and control your household network speed and signal strength.

Free Trial Visit Website

GlassWire – Network security features

GlassWire is a multifunctional tool that won’t only monitor and boost your Internet connectivity but also secure your household network against possible cyber-attacks.

The all-encompassing GlassWire console displays graphs that show precisely what programs have been eating your bandwidth and when so you can take the appropriate actions. The entire network traffic is monitored and filtered by IP/Host, app, traffic type, and more.

The tool uses a notification system to alert you of any network-related changes and new devices or apps connecting to your network and affecting bandwidth.

You can even see how your device apps and programs behave while you’re taking a break.

Additional tool features include an efficient firewall that can approve or deny app connection and block any intrusion from possible malware.

Take a look at some of its best features:

Network security features
Network traffic is monitored and filtered by IP/Host, app, traffic type, and more
Alerts you of any network-related changes
Detects any apps that are affecting bandwidth

GlassWire

Easy-to-use network traffic monitoring and firewall tool to quickly manage bandwidth limitations with minimum impact.

Free Trial Visit Website

SolarWinds Netflow Analyzer – Simple and modern interface

SolarWinds provides an easy-to-follow bandwidth monitoring software with a simple and modern user interface that allows users to easily access the information they need to improve their connection.

This software monitors your network and is able to identify traffic patterns. It provides IPv4 and IPv6 flow records.

It can also monitor Cisco NetFlow, Juniper J-Flow, sFlow, Huawei NetStream, and IPFIX flow data. Using this information it finds the apps and protocols that consume the most bandwidth.

You can set it up to get alerts whenever there are important changes in your application traffic. This will help you fix the issue right away.

NetFlow Traffic Analyzer uses the data it identifies to create comprehensive reports that help you understand your connection issues and what can be done about them.

The software is secure and is able to detect certain malicious traffic flows. This can prevent cyber attackers from accessing the devices on your network.

⇒ Get SolarWinds NetFlow Analyzer

NetLimiter 4 – Great for individuals

The best software currently available to help users prioritize bandwidth usage is NetLimiter 4.

This bandwidth prioritization software has a ton of features and a modern, easy-to-use interface. It even has a remote web interface that lets you log in from a different computer.

NetLimiter 4 Pro has a fully free trial period that is available to anyone.

This trial period gives users access to extra features such as traffic monitoring, remote administration, and even traffic blocking, along with many other features.

Also, anyone with a license to the pro version of the previous iteration will get full access forever.

It is also still a work in progress, with more features on the way. Packet loss and latency simulation, as well as advanced traffic monitoring that actively scans for threats, are both features that are still in development for NetLimiter 4.

There is also a working yet-to-be-documented API hanging off the program, giving tech-savvy users more options to extend the program to their liking.

⇒ Get NetLimiter 4

NetBalancer – Easy to use

NetBalancer has recently been spruced up with a more modern UI. Still, it does look a bit dated.

This helped keep it lower on the list since it feels less intuitive to use when compared to the more modern NetLimiter 4.

For the number of features in the program, though, it is still more usable than the next item on our list, TMeter.

The features that NetBalancer ships with, however, make it more than worth a look.

On top of all of the usual features one might expect from the typical bandwidth prioritization software, NetBalancer has a couple of surprises.

The first exciting feature is cloud synchronization, which lets users see web traffic and events on one computer from another.

The second is two different quick views of web traffic. NetBalancer has a widget to show current web usage (both in and out) and a system tray icon.

However, the system tray icon and the widgets look just as dated as the rest of the UI.

These two features don’t necessarily help with bandwidth prioritization, but they do help people figure out if they might need to use the prioritization features that NetBalancer has or provide a quick view for those who love statistics.

⇒ Get NetBalancer

TMeter – Wide array of features

TMeter is a free application that comes with a seemingly unlimited number of features.

Of course, it has the basics, such as traffic monitoring and bandwidth prioritization. But it also comes with many advanced features like built-in NAT, DHCP, and a built-in firewall.

All of these advanced features and statistics they help provide come at a cost. It is not a monetary cost, as the application is fully free, but rather a usability cost.

The UI is dated and can be confusing. The program itself is also overkill if you focus on the bandwidth prioritization of a home computer.

However, if you are a power user, the amount of information that can be seen from any of the traffic flowing through the program can be very enlightening.

The statistics can help you set up more advanced rules. When they are combined with advanced features, it can help you set up more advanced rules.

As you can see in the screenshot, rules can even be set up on a per-user basis across the network. So, you could technically limit your spouse’s bandwidth while you game.

The one missing feature, though, is a remote web interface. Unfortunately, that does not look like it’s on the roadmap for this program.

⇒ Get TMeter

How does an Internet priority software work?

Bandwidth prioritization software analyzes your traffic and connection status and, based on that information, is able to determine what apps or processes on your system use the most bandwidth.

They are able to allocate more bandwidth to apps or processes that require that as you use them.

Some allow you to manually select which app needs prioritization, while others determine this automatically and tweak your settings accordingly.

They are mainly useful when your network capacity is limited, and you experience symptoms like latency issues or page loading problems.

They can also greatly help users who connect multiple devices to the same network regularly.

Bandwidth prioritization can be very important to people on Internet connections with bandwidth limits or those seeking to ensure that the applications they care about can access the Internet as fast as they want.

This can be especially helpful for PC gamers to help avoid any possible lag caused by other applications hijacking the computer’s available bandwidth.

Any bandwidth prioritization software discussed above will help you get the job done; it all depends on the number of extra features and customization you might want.

FAQs

What is Internet priority software?

Internet priority software, also known as bandwidth prioritization tools, lets you control how much bandwidth each app or process can use. This ensures critical apps get priority while limiting less important traffic.

How does bandwidth prioritization software work?

These tools analyze your network traffic and allocate bandwidth where it’s needed most. You can either set manual rules for specific apps or let the software automatically adjust based on usage.

What is the best bandwidth prioritization software for PC?

ManageEngine NetFlow Analyzer and PRTG Network Monitor are professional-grade options, while NetLimiter 4 and GlassWire are user-friendly choices for individuals.

Do gamers need bandwidth prioritization software?

Yes. Bandwidth prioritization helps gamers reduce lag by ensuring games get more bandwidth while limiting background apps like downloads, streaming, or cloud syncs.

You might also be interested in our guide on how to limit or change the bandwidth on Windows 11.

In the comments section below, let us know if you have other suggestions or recommendations.

Best Bandwidth Limiter Tools for Windows 10 [Top 9 Picks]

Posted on March 9, 2023August 26, 2025 by Milan Stanojevic

Are you tired of your internet going slow because other stuff on your computer is using it all up? Well, there’s a way to fix that with special tools for Windows 10!

What are the best tools to limit Internet speed on Windows 10?

What are the best tools to limit Internet speed on Windows 10?

ManageEngine NetFlow Analyzer – Great bandwidth limiter

For bandwidth analysis and in-depth control of your network elements, NetFlow Analyzer is idea because it also keeps an eye on routers and firewalls.

This software helps you monitor bandwidth usage by interfaces and applications, and check the traffic by volume, speed, and utilization.

Your IT manager will be able to view traffic graphs by volume, speed, and level of usage. And it will be easy to locate any problem because NetFlow Analyzer filters such key metrics by IP address, ports, and protocols.

You may even identify which application is causing a traffic spike and halt it or prioritize any other process instead.

For instance, the built-in Cisco NBAR technology detects specific applications that use dynamic ports and drain your network’s bandwidth so that you may stop them.

Every time when an interface, IP group, or access point is using more bandwidth than the allocated quantity, you will be alerted.

The bottom line is that with NetFlow Analyzer you get deep visibility into all the traffic data on your network so that you can act quickly and block any unusual behavior.

Here are some of its key features to take into consideration:

Get alerts on exceeded bandwidth utilization
Track bandwidth-hogging applications
Get insights into the bandwidth usage of individual elements
Detailed graphical representation of network activities
Easy to use and implement on any network