Solved: Your VAIO Failed to Start Windows

The Your VAIO failed to start Windows error message appears at boot and prevents the operating system from loading. In some cases, after repeated attempts, you may come across a black screen with the Sony VAIO laptop not starting. 

We tracked it down, and the problem could be with Windows, the hardware, or the connected peripherals. And it’s fairly easy to get things up and running in most cases!

Why is my VAIO laptop not starting?

VAIO laptops don’t start when the system files are corrupt, or the BIOS boot options are misconfigured. If you can get to the Automatic Boot Repair or Startup Repair, it is most likely the former.

Besides, we can’t rule out the possibility of a malfunctioning hard disk/SSD or bad sectors on the drive.

How do I fix my Sony Vaio boot?

Before we start with the slightly complex solutions, try these quick ones first:

  • Press the power button to turn off the computer, then restart it and check whether the error message disappears.
  • Make sure the hard disk is properly connected to the PC. Check for loose connections and fix them.
  • Remove any non-critical peripherals connected to the PC. This includes your mouse and keyboard. Often, older models could be the reason the Sony VAIO operating system is not found.

If none work, head to the fixes listed next.

1. Change the Boot Mode

  1. Press the Power button to turn off the computer and then power it on.
  2. On the error screen, click on Start BIOS setup.start BIOS setup
  3. Go to the Boot tab, and select Boot Mode under Boot Configuration. For some models, the mouse doesn’t work in BIOS, so you will have to use the cursor keys to navigate and Enter to select an option.
  4. Now, choose Legacy if UEFI is currently selected.Legacy to fix your vaio failed to start windows
  5. Once done, hit F10 to save the changes and exit the BIOS.

When the laptop reads, Your VAIO failed to start Windows, and Windows won’t boot, change the Boot Mode to Legacy. And once the laptop loads the OS, you may fix problems with the UEFI mode. 

2. Go into Start Vaio Care (Rescue Mode)

  1. On the error screen, click the Start VAIO Care (Rescue Mode) option near the bottom right.Rescue Mode
  2. Next, click on Shut down.
  3. Now, wait for a few minutes, then power on the device, and it should load the OS.

3. Reset the BIOS

  1. Click the Start BIOS setup recovery option.BIOS
  2. Once the PC loads the BIOS, press F9 or F3, as the case may be, to load the setup defaults.
  3. Choose the appropriate response in case a confirmation prompt appears. 
  4. Now, hit F10 to save the change and exit the BIOS.reset BIOS to fix your vaio failed to start windows

If the boot device sequence or other BIOS settings were recently changed, especially after an automatic BIOS update, resetting it will do the trick! Besides, it also helps when the PC is stuck restarting.

4. Reinstall Windows

 In case the previous solutions didn’t work, you may consider reinstalling Windows. This can be achieved through the installation disc that came along with the PC, or you can create a bootable USB drive.

Once done, simply reinstall Windows. Remember, this will wipe out all the stored data on the PC, but it will work fine unless the problem is hardware-related.

5. Get the hardware inspected

When nothing else works, it’s most certainly a failing boot drive. HHDs (Hard Disk Drives) typically have a life span of 4-6 years, while SSDs (Solid State Drives) can last up to 10 years.

So, if yours has already crossed that threshold, consider replacing the drive. Besides, if you are presently using an HDD, we recommend switching to a reliable SSD for faster performance and minimal issues. This also helps when the laptop freezes while performing automatic maintenance.

To conclude, when the Sony VAIO operating system is not found, you should boot from USB and reload the OS. Once you have things up and running, consider improving the boot speed of Windows.

For any queries or to share which fix worked for you, drop a comment below.

Where Are Fonts on Windows 11? Folder Location & More

Have you ever wondered where all those fonts on your computer are stored? Knowing where to find your fonts is crucial whether you’re a graphic designer or someone who likes to personalize their system. In this piece, we will walk you through the font locations in Windows and show you how to manage them effectively.

Font locations might be missing due to a Windows error or a corrupted file. Those issues can be easily solved with the help of professional repair software.

How to find fonts on your computer

In Windows 10 and Windows 11, fonts are primarily stored in the same directory, C:\Windows\Fonts. This default font folder contains all the preinstalled fonts and user-installed fonts.

How to Navigate to the Fonts Folder

Method 1: Using File Explorer

  1. Open File Explorer by pressing Windows Key + E.
  2. Now open your C drive > Windows > Fonts folder.

Method 2: Using Control Panel

  1. On your taskbar, open the Search field and type Control Panel. Hit Enter.
  2. In the top-right of the Control Panel windows, in the Search Control Panel bar, type fonts and press Enter.

Method 3: Using Shell Command

  1. Press Windows Key + R to open the Run dialog box.
  2. Type shell:fonts and press Enter.

Creating a Shortcut to the Fonts Folder

Having quick access to the fonts directory can be helpful. Here’s how to create a shortcut:

  1. Navigate to the Fonts folder using the above methods.
  2. Right-click on the Fonts folder, then click on Show more options.
  3. Choose Send to and then Desktop (create shortcut).

Now, you’ll have a shortcut to the default font folder location on your Windows 11 desktop for easier access. You can even use a keyboard shortcut to open it: right-click the shortcut > click Proprieties > click Shortcut tab > under Shortcut key, add your preferred key combination.

Remember that depending on your user profile, you might need administrative rights.

Adding or Removing Fonts

To Add Fonts:

  1. Download the font file (usually TTF files or OTF files). If it’s archived, unzip it.
  2. Open the Fonts folder.
  3. Drag and drop the downloaded font file into the folder.

To Remove/Uninstall Fonts:

  1. Open the Fonts folder.
  2. Locate the font you wish to remove.
  3. Right-click on the font and choose Delete.

Downloading and Installing New Fonts

Adding additional fonts can give your projects a new look. You can add Thai fonts, TrueType fonts, non-European fonts, 3D fonts, or even custom fonts.

  1. Visit a reputable font website like Google Fonts or DaFont.
  2. Choose a font and download the file.
  3. Follow the steps above to Add Fonts.

If you want more details on how to download fonts on Windows 10 and 11, check out this guide. Also, if you want to download Microsoft Office fonts, the process is pretty similar.

Conclusion

Knowing where fonts are stored and how to manage them empowers you to take full control of your system’s aesthetics and functionality. From locating the default fonts folder location to adding or removing fonts, these simple steps can make a big difference in how you use and personalize Windows 10 and Windows 11.

You can also use fonts software to create your own. If that’s too time-consuming, check out the most popular fonts for Windows 11 that you can download right now.

How to Disable End-to-End Encryption in WhatsApp

Enabling end-to-end encryption adds an extra layer of protection on WhatsApp to prevent anyone other than the sender and receiver from accessing it. But have you ever thought of disabling it?

Would there be any possible advantages of doing so? We explore how to turn off this feature and the possible repercussions.

Why Disable End-to-End Encryption in WhatsApp?

  • You want to use third-party or modded apps.
  • Share your content with others, such as when sending a photo or video to someone else.
  • You’re looking to decrypt your messages.
  • You are having issues with WhatsApp especially when backing up your chats.

How do I turn off end-to-end encryption on WhatsApp?

1. Android devices

  1. Launch the WhatsApp app on your phone, tap on the three ellipses, then select the Settings menu.
  2. Tap on Chats.
  3. Next, tap on Chat backup.
  4. Tap on End-to-end encrypted backup.
  5. Now tap on Turn Off.
  6. You’ll be prompted to enter your encryption key or the 64-digit encryption key. If you lost it, tap on I lost my encryption key and follow the on-screen instructions.

2. iOS devices

  1. Launch the WhatsApp app on your iphone.
  2. Tap on the Settings icon at the bottom right corner and tap on the Chats tab.
  3. Now tap on Chat Backup.
  4. Locate End-to-end Encrypted Backup and tap on it.
  5. Tap on Turn Off, enter your security key and the feature will be disabled.

In the latest version of WhatsApp, end-to-end encryption for chats is enabled by default. This means whenever you start a new chat, you will get a notification that your messages are now end-to-end encrypted.

However, you can turn off end-to-end encryption for cloud backups saved in your Google Drive or any other backup service provider.

Can end-to-end encryption be decrypted?

You don’t have to worry about unauthorized access to your personal messages because WhatsApp cannot decrypt them. This is because encryption by default is for all chats, and even for backup encryption, they would need access to your backup encryption key.

This applies to law enforcement agencies. If anyone has been suspected of illegal activities and it was a legal requirement to surrender WhatsApp chats, the company would be unable to comply because they don’t have access.

However, another loophole is when you create WhatsApp backups and edit your encryption settings to disable the feature. Your messages will be stored unencrypted on the servers leaving your data vulnerable to anyone who can access them or other third-party apps associated with your backup solution.

And that’s how you disable end-to-end encryption in WhatsApp. As you can see, the process isn’t particularly difficult. However, disabling the end-to-end encryption isn’t a good security practice, and we don’t recommend it.

If its problems with WhatsApp web not working or Whatsapp won’t sync messages, switch to the app version instead of getting rid of your extra layer of security.

Do you prefer the end-to-end encryption security feature on or off? Let us know in the comment section below.

How to Block a Website in Chrome [4 Ways]

It’s important to know how to block a website in Chrome, especially if that website is harmful or distracting and interferes with your everyday activities.

This is pretty simple to do, and it only takes a couple of clicks, so in today’s guide, we’re going to show how to do that on your PC.

Does Google block some websites?

By default, Google blocks certain websites that are unsafe, malicious, or websites that promote illegal activities.

How can I block a certain website on Google Chrome?

1. Use the Chrome extension

  1. Visit the StayFocusd extension page and click Add to Chrome.
     
  2. Click on Add extension to confirm and wait while the browser extension is downloaded and installed.
  3. Once the extension starts, set Max Allowed Time per Day to 0 or any other value and click on Save Changes.
  4. Next, click on Add blocked websites.
  5. Enter the domain name in the correct format and click on Add blocked website.
  6. Repeat the last two steps for all websites you want to add to the block list.

2. Add a firewall rule

  1. Press the Windows key + X and choose Windows Terminal (Admin).
  2. Next, type ping and the domain that you want to block. In our example, we used ping facebook.com
  3. Now you’ll get the IP address of that domain. Save it, because you’ll need it for future steps.

After you’ve obtained the address you need to create a firewall rule by doing the following:

  1. Press Windows key + S and type firewall. Choose Windows Defender Firewall with Advanced Security.
  2. In the left menu, go to Outband Rules and click on New Rule.
  3. Select Custom and click Next.
  4. Now choose This program path and click Browse.
  5. Select chrome.exe from its installation directory. On our PC that’s: C:\Program Files\Google\Chrome\Application
  6. In the Protocol and Ports section, click on Next.
  7. In the Which remote IP addresses does this rule apply to select These IP addresses and click the Add button.
  8. Now paste the IP address of the website you want to block and click OK.
  9. In the next screen, select Block the connection.
  10. On the Profile screen, click Next.
  11. Lastly, add a name and description for your rule, so you can easily recognize it.

3. Edit hosts file

  1. In the Search bar type notepad. Locate Notepad on the list, right-click it, and choose Run as administrator.
     
  2. Go to File and select Open.
  3. Navigate to C:\Windows\System32\Drivers\etc\hosts
  4. Set the file type to All files and double-click on hosts.
  5. At the end of the file add the following line: 0.0.0.0 example.com
  6. Save changes.

This solution will block the website for all applications and not just the Chrome browser.

4. Modify router settings

  1. Go to your router’s configuration page by typing router IP in the address bar and log in.
  2. Next, locate the Parental Control option in the Security menu.
  3. Add the IP address of the website or its domain name.
  4. Make sure to add the IP address of the device that will be affected by this rule, unless you want to block the website on the entire network.
  5. Save changes.

Keep in mind that this solution affects the entire PC and not just your Chrome browser.

How to block websites on Chrome mobile?

For Android device

  1. Download AppBlock on your phone.
  2. Start the app and tap on Add in the Quick Block section.
  3. Go to Webs, enter the name of the website, and tap on Save.
  4. Make sure that the app has the necessary permissions to work properly.

For iPhone device

  1. Tap on Settings and choose Screen Time. Select Content & Privacy Restrictions and then Web Content.
  2. Select Limit Adult Websites and then choose Add Website.
  3. Enter the website URL and save the changes.  After that, the website will be blocked on your mobile device.

Remove unwanted ads, pop-ups & malware in Chrome

  1. Open Settings in Chrome and go to Privacy and security and choose Site Settings.
  2. Select Pop-ups and redirects and make sure it’s set to Don’t allow sites to send pop-ups or use redirects.
  3. Go back to Site Settings and choose Additional content settings and then Intrusive ads.
  4. Enable Ads are blocked on sites known to show intrusive or misleading ads.
  5. To remove malware, go to Reset settings and choose Restore settings to their original defaults.

If you want to block a website in Chrome, the easiest way is to use a third-party extension, but if you want a more reliable solution, consider adding a firewall rule that blocks that page. If you need something simpler, then you can use specialized software to block websites on your PC.

For additional security, many users prefer using antivirus with web filtering to achieve the same results. While the focus of this guide was on Chrome, you can apply most of these solutions to block websites in Microsoft Edge as well.

In case you encounter issues with blocked websites, our guide on how to allow Chrome to access the network in your firewall can help you fix it.

What method do you use to block websites in Chrome? Share your experiences with us in the comments section.

Solved: Facebook Dating is Not Showing Up

Many users reported that Facebook Dating is not showing up to them at all. This can be a problem since you won’t be able to access the feature at all.

Luckily, there are a few solutions you can use to fix this problem, so keep on reading to learn more.

Why is Facebook Dating not available to me?

If Facebook Dating is not available, it’s because you’re in a region that doesn’t have it available, or the Facebook app doesn’t have access to your location.

Then, there’s the corrupt app cache or running an outdated version of the app can also cause this problem.

How do I fix Facebook Dating if it’s not showing up?

Before we start ensure that your account has been active for at least 30 days. Try restarting or updating your Facebook app. Also, check if the Facebook servers are properly running.

Changing your relationship status to single and setting your age to at least 18 should enable this feature. Using Facebook Lite can also help sometimes.

Note icon NOTE
The steps listed here are for an iOS device, but the idea remains the same across operating systems. The equivalent measures on an Android device will yield similar results and get things up and running. 

1. Enable the location services

  1. Open the iPhone Settings, and tap on Privacy & Security.privacy & security
  2. Now, go to Location Services.location services
  3. Scroll down, locate the Facebook app and tap on it.
  4. Choose While using the app under Allow location access, and then enable the toggle for Precise Location. allow location to fix facebook dating not showing up
  5. Once done, relaunch Facebook and check whether Dating appears in the navigation bar.

You will have to grant Facebook location permission when Dating is not showing. Also, if Facebook doesn’t appear under Location Services, go to Facebook Status > tap on Check in > choose any option (Allow once, Allows while using the app, or Don’t allow) in the prompt > the app will now be listed in settings.

2. Pin Dating to the navigation bar

  1. Launch the Facebook app, tap the three-line menu icon at the bottom right, expand Settings & Privacy, and tap on Settings.settings to fix facebook dating not showing up
  2. Select Navigation bar under Preferences.navigation bar
  3. Tap on Customize the bar.customize the bar to fix facebook dating not showing up
  4. Tap the dropdown menu next to Dating.
  5. Finally, select Pin, and Dating should appear in the navigation bar.pin dating

3. Clear the app cache

  1. Open your phone settings, and tap on General.general
  2. Tap on iPhone Storage.
  3. Select Facebook from the list of apps.Facebook
  4. Tap on Delete App to clear all related data and choose the appropriate response if a confirmation prompt appears.delete app to fix facebook dating not showing up 

For apps on iPhone, you can’t separately delete the data. It rather uninstalls the app. Try that and reinstall Facebook from the App Store. Or you could easily clear the app cache on Android since the functionality is available.

Besides, if there are already other issues with the app, fix them first, including Something went wrong on Facebook and the App not active Facebook error. These may indicate problems with the account which conflict with the dating feature.

This isn’t the only issue, you can encounter, and many reported that the Message button is missing on Facebook as well as the Add friend button. However, we tackled those issues in separate guides.

For more solutions, see our full guide on Facebook Dating not working.

For any queries or to share what worked for you, drop a comment below.

How to Change Your Display Name in Google Meet

To change your display name in Google Meet, you must change your name in your Google account or use a combination with your nickname. 

Can I change my name in Google Meet without changing the Google account name? No, you can’t.

Some of our readers also asked how to change their name in Google Meet while in a meeting, but it’s impossible. If you change your Google name, you will have to exit the meeting and rejoin.

How do I change my preferred name in Google Meet and Gmail?

1. How to change your name in Google Meet on PC

  1. Open a browser and log into your Google account.
  2. Type or paste the following line into the address bar and press Enter to access the name in the basic info section: https://myaccount.google.com/name
  3. Now, click on the Edit icon to change your name.
  4.  In the personal info window, you may change your first name and last name, then hit the Save button below.
  5. When you go back, you will also see that you can set a nickname for yourself. If you click the edit icon and enter a nickname as well, you will be able to change your display name in Google Meet or other Google apps with a combination of names and the nickname.
  6. Click on the Display name as.
  7. You will have three possible options to choose from: First name and Last name, First name Nickname Last name, or First name Last name (Nickname). Hit Save if you choose an option.

Now, your display name will be changed automatically in all Google apps that feature your display name, including Google Meet. However, we remind you that if you are currently in a Google Meet session, you need to exit and join the meeting again to see the change.

To complete the change, you might also want to change your profile picture. You can do that from the Google Account main page and click on the Personal info tab.

2. Change your display name in Google Meet using your mobile device

2.1 On an Android device

  1. Go to the Android Settings, tap on Google, and select Manage your Google account.
  2. Now, select the Personal info tab, tap the Name option, and change your name in the dedicated fields.

2.2 On iOS

The procedure is similar on iOS but you need to open the Gmail app on your iPhone, tap the menu button, and select Settings. Then, it’s the same method: go to Manage your Google account > Personal info > Name and change it.

As you can see, the procedure on your mobile phone is even easier than on a browser.

How to change your name on Google Meet as a student?

To change a name on Google Meet, you will have to contact the admin of your school or work account.

Only they can update your display name for Google Meet, Gmail, and other Google apps.

Utilizing other features that come with Google Meet

  • Changing the Google Meet background – To change the background in Google Meet, click the three vertical dots button, select Apply visual effects, and select a background from the Backgrounds category.
  • Joining Google Meet from Gmail – You can to a meeting straight from your Gmail account. Here’s a guide on how to join Google Meet from Gmail.
  • Connecting a meeting room system to Google Meet – Our guide on how to connect a meeting system to Google Meet will help you with that.
  • Changing the camera on Google Meet – Go to Settings in Google Meet, click on Video, and select the camera from the drop-down menu. You may also change the microphone from the Audio section.

Here we conclude our guide on how to change the display name in Google Meet and change how your name appears in video meetings.

You might as well be interested in our guide on how to hide the Google Meet buttons from Gmail.

For any other questions or problems you might encounter, go to the comments section below and leave us a note.

Outlook to let users share mail and calendar with others, regardless of permission

Outlook for Web, and the new Outlook, which will become the default Outlook client in 2025, will allow users to share mail and calendar with others, no matter the level of permission, in a new feature that grants greater inbox control, according to the latest addition on the Microsoft 365 Roadmap.

Outlook on the Web and the new Outlook for Windows provides users with the ability to share mail and calendar with other users at different permission levels. 

Microsoft

But this is not all, though. The feature will also include an option for admins to use a new policy – Turn off sharing recommendations. This policy will prevent users from sharing folders.

Outlook will get the new controlling inbox features in November, and it will be generally available on the web and desktop platforms.

Outlook allows greater control over inboxes: Why does it matter?

Being able to quickly share mail and calendars with other more privileged users, means that entry-level users won’t have to wait for permission to do so, and admins won’t have to worry about needing to grant that permission, in the first place.

It will allow for seamless communication using Outlook, and it will greatly reduce time in contexts when time would be an issue.outlook control inbox

Even more, the new policy coming with the feature will allow admins to stop unwanted folders from being shared with other users, potentially preventing malware and other forms of cyberattacks, such as phishing.

Once enabled, users won’t be able to share folders, unless explicitly allowed, making it a great tool to control inboxes on Outlook.

Microsoft will also release Copilot to Outlook next month, and the AI tool will be able to help users compose emails, replies, and follow-ups, so November is an important month for this app. And speaking of sharing folders, Outlook recently got a feature allowing users to save attachments in their preferred folder.

Latest Edge uses your browsing data to generate AI-answers on Bing Chat

Microsoft Edge has received a Bing Chat feature in the sidebar for some time now. Using it, you can ask complex questions and get answers, generate summaries, change Edge browser settings, and more.

Recently, Microsoft rebranded Bing Chat in the sidebar with a new Copilot icon and modified the Bing Chat settings to clearly convey that Edge will send browsing data to Microsoft for producing page summaries on Copilot.

Until now, the Bing chat setting Allow access to any webpage or PDF, enabled by default, informed users that they were Allow(ing) Bing chat to access their browser’s web content to personalize their experience with summaries and highlights.

The new setting available in Canary under Sidebar > Bing Chat > Allow Microsoft to access Page content clarifies that you’re sending browsing data to Microsoft to make AI-generated answers and suggestions more relevant on Copilot.

Send my browsing data to Microsoft to make Ai-generated answers on Copilot

When you ask Copilot in Edge to summarize text on a long page, Edge asks your consent for Microsoft to access the page content with the checkbox ticked to agree on Send my browsing data to make AI-generated answers and suggestions more relevant on Bing with an option to continue and confirm chatting.

Once you agree, the page summary will be generated by sending your query, previous conversation history, and full browsing context to Bing Chat. This also enables a related setting in the sidebar.

Next time, Bing chat automatically generates a summary and sends it to Microsoft without obtaining your consent again. Remember this and avoid using Bing chat on sensitive information pages to protect your privacy. Alternatively, disable the Allow Microsoft to access Page Content setting if you don’t want to use it.

You can even go a step further. If you’re on Windows 11, telemetry and data collection are on by default, but you can also disable them.

What’s your take on Bing Chat or Copilot in Microsoft Edge? Let us know in the comments below how helpful it is in your daily routine.

Solved: Overwatch 2 Keeps Crashing on Windows 11

Many users have complained that Overwatch 2 has been crashing mid-game for no reason. If you are one of them, this guide can help!

We will discuss the potential causes of the issue along with expert-recommended fixes to put you back in the video game with uninterrupted excitement.

Why does Overwatch 2 keep crashing my computer?

  • Compatibility issues due to outdated graphics drivers.
  • Your system doesn’t meet the system requirements, causing performance issues.
  • Software conflicts or corrupted game files.
  • Overheating or overclocking.

How do I stop Overwatch 2 from crashing on Windows 11?

Before proceeding with any steps to fix Overwatch 2 crashing on Windows 11, go through the following preliminary checks:

1. Repair files on Battle.net

  1. Press Windows + E to open the File Explorer window.
  2. Go to Documents, locate the Overwatch file, and rename it Overwatch.old.
  3. Press the Windows key, type battlenet, and click Open.Battlenet - overwatch 2 keeps crashing windows 11
  4. Go to the Library section, go to Overwatch 2, then select the Settings menu.
  5. Click Game Settings.Select Game Settings
  6. Select Additional command line arguments, copy & paste this command, and click Done: --tank_WorkerThreadCount 2 -d3d11 -threads 2Additional command line arguments
  7. Now click the Settings icon again, and select Scan and Repair.Settings icon again, and select Scan and Repair
  8. Next, click Begin Scan, wait for 15 minutes, and it will inform you if it fixed any files.Begin Scan

2. Change the compatibility settings for the game

  1. Navigate to this path: C:\Program Files (x86)\Overwatch
  2. Right-click the game’s exe file and select Properties from the context menu.Right-click the game and select Properties from the context menu -overwatch 2 keeps crashing windows 11
  3. Go to the Compatibility tab, remove a checkmark next to Disable fullscreen optimizations, and place one next to Run this program as an administrator.explorer_run as admin
  4. Click Apply, then OK to save the changes.

3. Update/reinstall your graphic driver

  1. Press Windows + R to open the Run dialog box.Device Manager Run command -overwatch 2 keeps crashing windows 11
  2. Type devmgmt.msc and click OK to open Device Manager.
  3. Locate and click Display adapters to expand it.
  4. Right-click the graphics driver and select Update driver.Graphics Driver update
  5. Click Search automatically for drivers, then follow the on-screen instructions to complete the process.Update driver 2
  6. If no update is available, right-click the driver and select Uninstall device.Uninstall graphics driver
  7. Go to Action, then select Scan for hardware changes to reinstall the graphics card driver & resolve compatibility issues.Action scan for hardware changes

4. Run an SFC scan

  1. Press the Windows key, type cmd, and click Run as administrator.CMD elevated overwatch 2 keeps crashing windows 11
  2. Type the following command to identify and replace the problematic system files with a clean copy from the local cache or the original installation media and hit Enter: sfc /scannowSFCSCANNOW CMD
  3. Once the commands are executed, restart your computer to let the changes take effect.

5. Adjust the graphics settings

  1. Press Windows + I to open Settings.
  2. Go to System, then click Display.System display -overwatch 2 keeps crashing windows 11
  3. Choose Graphics.Graphics  -overwatch 2 keeps crashing windows 1
  4. Click Browse and look for the Overwatch game folder on your computer, then select Add.
  5. Once added, click the app, then select Options.Options
  6. Choose High performance or Let Windows decide (High performance) and click Save.Choose High performance and click Save

6. Change the Power plan

  1. Press Windows + R to open the Run dialog box.Type powercfg.cpl and click OK to open the Power plans - overwatch 2 keeps crashing windows 11
  2. Type powercfg.cpl and click OK to open the Power plans.
  3. Select the High Performance option, then close the window. Launch the game to check if the issue persists.explorer_High performance

7. Allow the game through the firewall

  1. Press the Windows key, type control panel, and click Open.Control Panel start menu -overwatch 2 keeps crashing windows 11
  2. Select Category as View by and choose System and Security.System and Security CP
  3. Click Allow an app through Windows Firewall under the Windows Defender Firewall option.Windows Defender
  4. Click Change settings, then click Allow another app.Change app
  5. Next, click Browse, select the app, and click Add to include it in the list.explorer_click Browse, select the app, and click Add to include it
  6. Now locate the app, place a checkmark next to Public & Private, then click OK to save the changes.explorer_lace a checkmark next to Public & Private, then click OK to save the changes.

Maintaining a stable internet connection and allowing Overwatch 2 through the Windows firewall can help you prevent other issues like Overwatch Lost Connection to Game Server [LC-202] as well.

8. Set High Priority for Overwatch 2 and Battle.net

  1. Press Ctrl + Shift + Esc to open Task Manager.
  2. Go to the Details tab, and locate Battle.net.exe, then select Set priority, then select High.Battle.net.exe, then select Set priority, then select High. -overwatch 2 keeps crashing windows 11
  3. Locate Overwatch 2 and follow the same steps, then close Task Manager.

9. Reinstall the Overwatch app

  1. Press the Windows key + I to open the Settings app.
  2. Go to  Apps, and select Installed Apps.Apps - Installed apps -overwatch 2 keeps crashing windows 11
  3. Click the three dots next to Overwatch 2, and select Uninstall.Uninstall - overwatch 2 keeps crashing windows 11
  4. Click Uninstall again to confirm the step.Uninstall 2
  5. After Overwatch is removed from your PC, download the game from the Battlenet app.
  6. Follow the onscreen instructions to complete the process.

Reinstalling the app can also be beneficial if you are experiencing high CPU usage caused by Overwatch.

Does Overwatch 2 needs a high-end PC?

No, you can get 30 FPS in Overwatch 2 if your PC fulfills the minimum requirements, i.e., Memory 6 GB RAM, 50 GB free disk space, a graphics card NVIDIA GeForce GTX 600 series, AMD Radeon™ HD 7000 series, and Intel Core i3 processor.

Also, the game is not resource-intensive and can be played without any issues. However, corrupted game files of Overwatch 2 can cause it to crash.

Therefore, to avoid game crashes on your PC, keep your graphics driver updated, ensure there is sufficient space on your computer, and keep Windows OS updated to the latest version.

Did we miss a method that helped you? Don’t hesitate to mention it in the comments section below. We will be happy to add it to the list.

How to Connect an Access Point to a Wireless Router Without a Cable

If you want to extend your Wi-Fi reach to far corners of your home, office, or any space without cables, this guide can help!

We will discuss simple ways to connect an access point to a wireless router without a cable & boost your connectivity to enjoy a more expansive and efficient wireless setup.

How can I connect an access point to a wireless router without a cable?

Before proceeding with any steps to connect an access point to a wireless router, go through the following preliminary checks:

  • Make sure your wireless router and access point are in working condition, are capable of wireless connection, and have access to a power outlet.
  • You need a working laptop or desktop to configure the router settings.
  • Ensure the Access Point device supports bridging.
  • Make sure your wireless drivers are updated to avoid issues like problems with wireless adapter or access point.

1. Configure the main Wi-Fi router

  1. Press the Power button to turn on the router by connecting it to a power source.
  2. Plug one end of the ethernet cable into the modem and the other to the router, then connect it to the internet.
  3. Press the Windows key, type cmd, and click Run as administrator.CMD elevated -How to connect access point to wireless router without cable
  4. Type ipconfig and hit Enter. Locate and copy the IP address next to the Default Gateway option.cmd_ipconfig
  5. Next, open a browser & paste the Default Gateway address in the address bar, and press Enter.
  6. Input the username and password mentioned at the back of the router. Enable DHCP, found usually under the Services or Network Setup page.chrome_How to Connect an Access Point to a Wireless Router Without a Cable
  7. Now note down the following values you need to proceed with the setup on the Access Point:
    • The first and last address of the DHCP IP Pool range
    • SSID(name of the wireless network) and password
    • Security Mode ( such as WPA2-Mixed PSK) and the frequency band (2.4GHz or 5GHz)
    • The router’s Mac address; if you can’t find it on the Status or General settings page, look for it at the back of the router. You can skip it if both the routers are of the same brand.
  8. Before closing the router settings page, click Save Changes or Apply Changes to confirm the changes.
  9. The action will restart the router. Once rebooted, remove the cable from the Wi-Fi router.

For a detailed walkthrough on accessing your router settings, check out this guide on how to login to your router.

2. Set the static IP address for Wireless Access Point

  1. Connect your AP (the second router) and your laptop via ethernet cable like you did with the main router.
  2. Disable Wi-Fi and find the Default Gateway using the ipconfig command from the Command Prompt.
  3. Open a browser & paste the Default Gateway address in the address bar, and press Enter. Usually, for TP-Link, it is 192.168.0.1& for GX, it is 192.168.1.1
  4. Enter username and password, which is usually admin and admin.
  5. First, check the Working mode of the router; it should be AP.
  6. Locate WDS bridging mode; for the TP-Link router, go to Advanced>System Tools> System Parameters, then select Enable WDS Bridging.
  7. Next, input all the information you have noted down from the main router, including the first and last address of the DHCP IP Pool range, security mode, etc.
  8. Enter the SSID similar to the main Wi-Fi router, and enter the same password, security method, Wi-Fi channel, & frequency band as the main one.Connect an Access Point to a Wireless Router Without a Cable
  9. Next, go to LAN or a similar option and change the IP address to something close to the wireless router’s IP address. Let’s say your router’s IP address is 192.168.1.1; then set the IP address to 192.168.1.2 and click Save.
  10. Next, disable the DHCP Server, double-check the IP address under LAN, and click Save.
  11. Reboot your router.

3. Connect the Wireless Access Point to the main router

  1. Once you have configured both devices to connect them without a cable, press Wi-Fi-protected setup (WPS) on both routers simultaneously; as the new settings are saved, the router will restart.wps-5
  2. Keep the Access point or the second router away from the main one, but it should stay in the range for uninterrupted connectivity.
  3. You can now connect your wireless device to the internet using AP’s network credentials and test the speed.

What is the difference between a WiFi extender and an access point?

CategoryWi-Fi ExtenderAccess Point
FunctionalityReplicates & amplifies the existing Wi-Fi signal to extend coverage.Creates a new Wi-Fi network or extends the current one by connecting the main router via ethernet cable or wirelessly.
InstallationSet up is simple & involves pairing with the primary router; hence, no wired connection is needed.Requires an ethernet cable at least at the time of setup. Also, you must have the SSID and password handy to configure this one.
PlacementPositioned between the primary router & areas with weak Wi-Fi signals.Can be placed in areas where you want to extend the Wi-Fi coverage.
SSID and SecurityIt may have a different SSID than the primary router so that it can have several Wi-Fi networks.Can use the same SSID and security settings as the primary router, providing seamless connectivity.

If you want to understand more about access points and explore the differences between Wi-Fi Mesh and access points, read this guide.

Always keep both routers in range to attain seamless connectivity and uninterrupted internet. If the frequency band you are using is either 5GHz or 2.4GHz, keep the router within 200 ft, and keep them as high up as possible to ensure there are no physical barriers between them.

Also, be very careful while selecting the band frequency on your devices, as the interference between two frequencies could affect your Wi-Fi performance.

The guide explains the general method to connect an access point to your wireless router without cable; if you want tips specific to your router, feel free to mention your queries in the comments section below.

Fix: ESIF TYPE – IPF TIME Error on Windows 11

If your computer is crashing with a blue screen and you see ESIF TYPE – ERROR MODULE IPF Time on your Event Viewer on Windows 11, this guide can help!

We will explore some WR expert’s recommended methods after discussing the common causes of the issue.

What is ESIF TYPE – IPF TIME Error on Windows 11?

ESIF TYPE – IPF TIME Error is an event marked as an error in the Event Viewer, and it is related to the Intel Innovation Platform Framework (IPF) or Intel Speed Shift Technology (SST) on Intel-based PCs. Here are some probable causes of the issue:

  • Outdated or corrupted drivers.
  • Third-party software interference.
  • Misconfigured power or system BIOS settings.
  • System instability due to overheating, power supply issues, or memory problems.

How do I fix the ESIF TYPE – IPF TIME Error in Windows 11?

Before engaging in advanced troubleshooting steps to get rid of this error message, you should consider performing the following checks:

  • Ensure your Windows and BIOS firmware are updated to the latest version.
  • Press the Windows key, type event viewer, then click Open; look for the error, and click Details to determine the cause. If an app is responsible for the issue, reinstall it.
  • Reboot your PC and verify if you have a stable internet connection.
  • Backup your important data.

1. Run SFC & DISM scans

  1. Press the Windows key, type cmd, and click Run as administrator.CMD elevated
  2. Type the following command to identify and replace the problematic system files with a clean copy from the local cache or the original installation media and hit Enter: sfc /scannowCMD DISM & SFC  -esif type error module ipf time
  3. Next, copy & paste the following command to check if the component store is healthy and press Enter: Dism /Online /Cleanup-Image /CheckHealth
  4. To access the level of corruption, type the following command and hit Enter: Dism /Online /Cleanup-Image /ScanHealth
  5. Copy & paste this command to attempt to repair the Windows image by restoring the corrupted files with good copies from a reliable source and press Enter: Dism /Online /Cleanup-Image /RestoreHealth
  6. Once the commands are executed, restart your computer to let the changes take effect.

This process can be greatly simplified by using specialized third-party repair software. This tool will scan your system and repair or replace any broken or corrupted files within minutes and with just a few clicks.

2. Update the Intel IPF & Chipset driver

  1. Go to your computer’s motherboard manufacturer’s website; we have used an HP device to demonstrate the steps.
  2. Select the product from the Software and Drivers window from the Laptop, Desktop, and Other & Printer options.product from the Software and Drivers window from the Laptop, Desktop, and Other options.
  3. Enter your device’s serial number or allow the site to recognize your device, then select Submit.your device’s serial number or allow the site to recognize your device. -  ESIF TYPE - IPF TIME Error on Windows 11
  4. Once done, mention your Windows OS and click Submit.chrome_mention your Windows OS and click Submit.
  5. Click All drivers, then the Driver Chipset category to expand, locate the Intel Innovation Platform Framework driver and click Download.chrome_fClick All drivers, then the Driver Chipset category to expand, locate the Intel Innovation Platform Framework driver and click Download.
  6. Double-click the installation file and follow the on-screen instructions to install the updated version of the driver.
  7. Now look for Intel Chipset Installation Utility and Driver or anything related to SMB controller driver and click Download.
  8. Double-click the downloaded file and follow the on-screen instructions to update the driver.
  9. Once complete, restart your computer to save the changes.

3. Reinstall the Intel IPF & Chipset driver

  1. Press Windows + R to open the Run dialog box.Device Manager Run command -  ESIF TYPE - IPF TIME Error on Windows 11
  2. Type devmgmt.msc and click OK to open the Device Manager app.
  3. Locate System devices, and locate Intel (R) Innovation Platform Framework Manager, right-click and choose Uninstall device.Uninstall device
  4. Next, locate Intel(R) SMBus -7AA3 or similar, right-click it, and select Uninstall device from the context menu.
  5. Go to Action and select Scan for hardware changes to reinstall the missing drivers.Action scan for hardware changes
  6. Close Device Manager and check if the ESIF TYPE – ERROR MODULE IPF TIME still appears on the Event Viewer.

Also, go through the entire list of drivers mentioned and look for a yellow triangle. If found, right-click the driver and select Uninstall device, then reboot your computer to reinstall.

4. Perform a system restore

  1. Press Windows + R to open the Run window.rstrui command Restore point -esif type error module ipf time
  2. Type rstui.exe and click OK to open the System Restore window.
  3. Select Choose a different restore point and click Next.Next Choose a different restore point
  4. Now, select a restore point from the list and click Next.Choose a point
  5. Click Finish to initiate the restoration process.Finish

Windows will restart and try to take your system to the chosen point; however, if it comes up with an error like the Restore point was not successfully complete, read this guide to know the solutions.

5. Perform an in-place upgrade (Last resort)

  1. Visit the Windows 11 official download website and locate the Download Windows 11 Disk Image (ISO) for x64 option, select Windows 11 (multi-edition ISO), and click Download Now.
  2. Next, choose a language from the drop-down, click Confirm, then click the Download button.chrome_Next, choose a language from the drop-down, click Confirm, then click the Download button.
  3. Once the ISO file is downloaded, locate and right-click it to choose Mount from the context menu. choose Mount from the context menu.
  4. On the next window, double-click the setup.exe file to open the Windows 11 Setup wizard and click Yes on the UAC prompt.Setup1
  5. On the Install Windows 11 dialog box, click Next.
  6. Click on Accept on the license terms page.
  7. On the Ready to install page, make sure the Keep personal files and apps option is selected to keep your files. If it is not selected, click Change what to keep and choose to keep files.
  8. Next, click Install.Install

Your computer will restart a couple of times to complete the upgrade. Once done, you will get to the login screen.

Our WR experts suggest that to avoid ESIF TYPE – IPF TIME Error in Windows 11, ensure you always have a reliable antivirus in place and keep an eye on your system drivers, Windows OS, and BIOS updates.

These precautionary measures can also help you prevent issues like ESIF TYPE – DPFT TIME Error, wherein outdated Intel Dynamic Platform Thermal Framework driver causes issues.

If you have any questions or suggestions about the subject, feel free to mention them in the comments section below. We will be happy to assist.

BSoD Code 139: How to Fix it

Blue Screen of Death is one of the most annoying issues that Windows users have been facing for a long time. One of the most dreaded ones is BSoD code 139.

In this guide, we will delve into common causes and discuss expert-recommended fixes to regain control of the system functionality.

What is blue screen code 139?

This BSoD Bug Check code 0x139: KERNEL_SECURITY_CHECK_FAILURE indicates that the kernel has identified the corruption of a critical data structure. Sometimes it also appears as kernel_security_check_failure (139). Here are the probable causes of the error:

  • Recent software/hardware installations or updates.
  • Outdated or incompatible drivers.
  • Malware infection or corrupted system files.
  • Memory-related issues.

How do I fix blue screen code 139? 

Before proceeding with any steps to fix the BSoD error code 139, go through the following preliminary checks:

1. Update your device drivers

  1. Press Windows + R to open the Run dialog box.Device Manager Run command - BSoD Code 139
  2. Type devmgmt.msc and click OK to open Device Manager.
  3. Go to each category individually, and look for an exclamation mark in the yellow triangle on the device’s logo. If you see it, right-click the driver and choose Update driver.Graphics Driver update
  4. Next, click Search automatically for drivers and follow the on-screen instructions to complete the process.Update driver 2 BSoD Code 139
  5. Repeat the process if multiple drivers have the yellow triangle to resolve any driver issues.

2. Run an SFC scan

  1. Press the Windows key, type cmd, and click Run as administrator.CMD elevated -BSoD Code 139
  2. Type the following command to identify and replace the problematic system files with a clean copy from the local cache or the original installation media and hit Enter: sfc /scannowSFCSCANNOW CMD
  3. Once the commands are executed, restart your computer to save the changes.

This whole process could be made easier by using specialized third-party software. These kinds of tools automized most of the steps described here and everything can be done with just a few clicks.

3. Run the Windows Diagnostic tool

  1. Press the Windows key, type windows diagnostic, and click Open.Memory diagnostic tool BSoD Code 139
  2. Select Restart now and check for problems, then your computer will reboot.memory-diag-tool 3 -Restart now and check for problems, then your computer will reboot.
  3. The Windows Memory Diagnostic tool will scan your system to check for issues related to the computer’s memory (RAM).memory-diag-tool
  4. Once the test is complete, your system will reboot and take you to the login screen.

Login, and you will get the results on the screen. If the test found issues, remove dust or debris from the RAM and ensure it is properly seated.

Run the tool again, and if it still shows errors, you might have to replace or repair the faulty RAM to fix the BSoD code 139.

4. Run the CHKDSK command

  1. Press the Windows key, type cmd, and click Run as administrator.CMD elevated -BSoD Code 139
  2. Copy & paste the following command after replacing C with your system drive and hit Enter: chkdsk C: /f /r /xCHKDSK  -eplacing C with your system drive
  3. Type Y to proceed and press Enter.
  4. To initiate the scan, your computer will restart. Once the scan is complete, reboot your PC again.

The scan checks the integrity of your hard drive and fixes various disk-related issues, such as Memory Management error 0x0000001A on Windows 11; read this to learn more.

5. Run the Driver Verifier to track down a misbehaving driver

Before running the utility, make sure you create a restore point and enable storing mini dump using these steps:

  1. Press Windows + R to open the Run dialog box, then type sysdm.cpl and click OK.explorer_type sysdm.cpl and click OK. -bsod code 139
  2. Go to the Advanced tab, locate Startup and Recovery, and click Settings.Startup and Recovery , then Settings
  3. Remove the checkmark next to Automatically restart, & for the Write debugging information option, select Small memory dump (256 KB), and set the Small dump directory to %SystemRoot%\Minidump, then click OK and restart your computer.

Once your PC is turned on, follow these steps to run Driver Verifier to scan for driver faults:

  1. Press the Windows key, type verifier, and click Open. Click Yes on the UAC prompt.indows key, type verifier, and click Run as administrator -bsod code 139
  2. For the Select a task page, select Create custom settings (for code developers) and click Next.Create custom settings (for code developers) and click Next.
  3. Next, on Select individual settings from this full list page, select all the options except DDI compliance checking and randomized low resource simulation, then click Next.verifiergui_Next, on Select individual settings from this full list page, select all the options except DDI compliance checking and randomized low resource simulation, then click Next.
  4. From the Select what drivers to verify, place a checkmark next to Select driver names from the list, then click Next.verifiergui_From the Select drivers to verify list, select all the non-Microsoft provided drivers and Finish.
  5. Click Finish; then you will get a popup asking to initiate the restart; click OK, then restart your computer.Click Finish

Now, you must ensure the verifier is running. To do that, follow these steps:

  1. Press the Windows key, type cmd, and click Run as administrator.CMD elevated -BSoD Code 139
  2. Type the following command and hit Enter: verifier /querysettingscmd_ verifier /querysettings
  3. If it is running, you will see the list of drivers. Now reboot the system and wait for it to crash to a Blue Screen; meanwhile, you can use it normally.
  4. If your system crashes, it triggers a Blue Screen of Death (BSoD) with a specific error code. Note it down to find out the problematic driver.
  5. The Driver Verifier will also store all information about the crash in a dump file; you can read the log files using the Windows debugger tool.

Next, to reinstall the problematic driver, then disable the Driver Verifier using Command Prompt, follow these steps:

  1. Press Windows + R to open the Run dialog box.Device Manager Run command - BSoD Code 139
  2. Type devmgmt.msc and click OK to open Device Manager.
  3. Go to the driver, right-click it, select Uninstall device, then restart your computer to reinstall it.Uninstall device
  4. Once your computer is up, open Command Prompt with administrator rights and type the following command, then hit Enter: verifier /resetcmd_verifier /reset
  5. Reboot your computer normally.

In case you are still encountering the BSoD error code 139, restore your PC to the last known good configuration.

To avoid BSoD errors, always keep your drivers and Windows up to date and install only the software and hardware compatible with your device.

If you have any questions or suggestions about the subject, feel free to mention them in the comments section below.

Windows 11 has reached 400 million users, still far behind Windows 10

It seems Windows 11 has reached an important milestone: there are over 400 million Windows 11 users in the world, according to an internal report accessed by Windows Central.

The report is not yet public, and Microsoft has not released a statement about it yet, but this means Windows 11 needed 2 years to reach this point. In comparison, Windows 10 reached this number in less than a year, according to the same article.

What does it mean? Well, it means that Windows 11 is still not popular enough among Windows users. You can find the most important Windows 11 stats here, but one thing is clear: it seems gamers love this operating system because it has experienced a growth in popularity for gamers over 2023.

However, according to the same report (it’s not yet made public by Microsoft, so take this news with a pinch of salt), Windows 11 is on its way to getting to 500 million users by January 2024. This would be quite the achievement considering Windows 11’s market share is still very low: 23,64%, according to the latest stats.

Windows 11: 400 million users, Windows 10 still going very strong

Despite Microsoft announcing that Windows 10 will reach the end of support in October 2025, the operating system is still the dominant Windows on the market. The latest statistics place it at a staggering 71,62% market share, which is nearly triple that of Windows 11.

It took a while for Windows 10 to reach 1 billion users, as it did so in 2020, 5 years after its release. But it seems that not even the release of Windows 11 could stop its dominance. windows 11 400 million users

Plus, we’re talking about different OS. Windows 11 sports many AI features, which Microsoft has been at the forefront of, ever since AI came into the picture. But it seems users are not impressed. Many people choose to downgrade back to Windows 10, after updating to Windows 11.

However, as Windows 10’s end is approaching, a lot of people will have to upgrade to Windows 11. But if this is the only way Windows 11 ramps up more users, then it’s not exactly the best way.

But what do you think?

Microsoft Edge integrates Copilot in its Bing Chat tool

Microsoft Edge Canary has integrated Copilot (with its new icon) in the Bing Chat sidebar, in the latest update to the channel. First spotted by Windows enthusiast, @Leopeva64, Microsoft made some first changes when the option Ask Bing was turned into Ask Copilot.

The new Copilot icon, which debuted in September when the Redmond-based tech giant revealed it at the Microsoft Surface Event, also appeared in the tool every time it was refreshed.

Was Microsoft thinking of replacing Bing Chat with Copilot? Arguably yes, and we explain the reason behind it: uniformity. As the Redmond-based tech giant is releasing multiple AI features out there, it’s better to have a single product, rather than multiple. This way, customers won’t get confused.

It seems that this is what Microsoft is doing, at least in Edge.

This is how Copilot looks in Microsoft Edge

  1. Microsoft changed the Bing Chat icon, to Copilot’s newest icon, as you can see in the picture below.microsoft edge copilot
  2. Copilot also appears when you hover over the icon. So no more Bing Chat, it seems.
  3. When right-clicking, the option to Ask Copilot will appear. To us, however, this option is not yet there, even though Edge Canary has the latest update.microsoft edge copilot

As for functionalities, Copilot on Microsoft Edge has the same features as Bing Chat: it will be able to use plugins, for example.

In Edge Canary, Copilot even makes an appearance in the settings, so it’s safe to say Microsoft has integrated there, as well.

According to its Settings, using Copilot on Microsoft Edge will improve the experience of using Copilot in Windows 11. However, users have to enable the option, first, as you can see in the image below.

It seems the Redmond-based tech giant is really taking the steps to align its now popular AI tool, Copilot, everywhere. Where does Bing Chat end, and Copilot begin, though?

And don’t leave aside the fact that Microsoft Edge now lets you add screenshots to Copilot, so feel free to take advantage of that by applying our quick steps.

How to Make Your X (Twitter) Account Private [2 Ways]

If you do not want everyone to know what you’re up to on the internet, making your X (Twitter) account private is something you should consider.

The process is as simple as a toggle of a button, as you shall see below.

The Benefits of a Private X Account

  • The biggest benefit is privacy so that only people in your circle can see what you post on your timeline.
  • You can be more open about your interests and activities without fear of judgment from others.
  • Get more control over who follows you and doesn’t by accepting/rejecting follow requests.
  • Easily delete inappropriate tweets or other content posted by mistake before they gain traction.
  • Filter unwanted interactions with strangers, as their messages won’t reach your inbox.

How do I make my X (Twitter) account private?

How to make X (Twitter) account private on desktop

  1. Launch your X app or X for web on a browser if your Twitter app fails to launch.
  2. On the left-hand pane, click on More.
  3. Select Settings & Support>Settings and privacy.
  4. Click on Privacy and safety then select Audience, media and tagging.
  5. Check the Protect your posts box.

How to make X (Twitter) account private on mobile

  1. Launch your X app on your phone.
  2. Tap on your profile picture, select Settings & Support>Settings and privacy.
  3. Next, tap on Privacy and safety.
  4. Tap on Audience and tagging.
  5. Toggle on the Protect your posts option.

You should now see the padlock icon next to your username. Now anyone who is not a current follower will not see your posts and will have to make a follower request to gain access.

Does Twitter tell you who viewed your profile?

X (formerly Twitter) doesn’t show you who viewed your profile because it would be a privacy concern for users. The only way to know if someone has viewed your profile is by using third-party apps that can track this information.

Even so, the apps will not reveal the identity. You will only get the number of profile visits. 

It’s no secret that online privacy is important to just about everyone. If you’re one of the big players on Twitter, you might be a little worried about your account being hacked. Keeping your tweets protected is a start to securing your account.

However, if you don’t give much thought to privacy or aren’t that concerned about keeping your tweets private, you can leave your account public and even go further and integrate Slack into your Twitter account. This can help you stay updated on when your name is mentioned and keep interactions active.

And for the best user experience to get the best of both worlds, we recommend the best Twitter browsers that will elevate your browsing on the app.

Do you prefer your account private or public? Let us know in the comment section below.

Solved: This Network May Have a Captive Portal Warning

If you’ve ever tried to access a public Wi-Fi hotspot and met with the This network may have a captive portal warning, this article will be of interest to you.

For the most part, it’s probably a minor bug that can be fixed by restarting your devices; if not, our troubleshooting steps can help eliminate this block.

What does it mean when a network may have a captive portal?

A captive portal is typically associated with public Internet or a sponsored service made available to guest users after they have passed through an authentication step.

This can be a login screen, a check-in page, a paywall, website logins, etc. Each of these has different security risks and is recommended for specific situations.

How do I fix the captive portal error on Windows 11?

Start off with the following simple workarounds before the main solutions:

1. Disable your antivirus temporarily 

  1. Hit the Start menu icon, type Windows Security in the search bar and click Open.
  2. Click on Firewall & network protection, then select Public network.league of legends black screen after champion select
  3. Locate Microsoft Defender Firewall and toggle the off button.turning off Microsoft Defender Firewall Windows

2. Change the DNS settings

  1. Hit the Windows key, type Control Panel in the search bar, and click Open.
  2. Select Network and Internet>Network and Sharing Center.Network and Sharing Center
  3. Click on Change adapter settings.
  4. Right-click on your Wi-Fi connection and click on Properties from the list of options.
  5. In the Properties window, select Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6) option, depending on your network card configuration and hit OK.

3. Disable problematic browser extensions

  1. Launch your browser in this case Google Chrome, and click on Menu.
  2. Go to More Tools > Extensions.chrome extensions
  3. Here, you need to disable the most recently installed extension first. Disable the extension and restart Chrome.
    webpage was blocked by an extension
  4. If the issue persists and you don’t have any recently installed extensions, start disabling all the extensions one by one.
  5. Start with VPN, security, online service, or adblockers extensions then restart the browser.

4. Disable your VPN 

  1. Press the Windows key and select Settings.settings windows 11
  2. Next, select Network & internet and click on VPN in the right-side menu.
  3. Select the VPN connection you want to disable, click on the drop-down and select Remove.remove VPN

Users who like to mask their identity in public places by hiding IP addresses may find out they can’t access the Internet in such places. If you must use it, we suggest you disguise your VPN.

5. Disable Proxy 

  1. Press the Start Menu icon and select Settings.settings windows 11
  2. Click on Network & Internet on the left pane, then scroll down and click Proxy on the right pane.Network proxy settings
  3. Select Edit next to Use a proxy server option in the Manual proxy setup section, toggle off Use a proxy server and click on Save.Disable proxy server

How do I set up a Captive Portal Authorization system?

  • Choose an appropriate Captive Portal solution – A captive portal solution should be compatible with your hardware, secure enough to prevent unauthorized access, and easy to use.
  • Set up custom DNS servers or use standard DNS servers – Servers allow you to control how traffic is redirected. Custom DNS servers redirect web traffic to their own web portals, while standard DNS servers provided by your ISP will allow users to access all websites without restrictions.
  • Specify public access restrictions and acceptable use policies – You can enforce restrictions by specifying what websites are allowed to connect to the network, determining the time limit for each session, and blocking certain types of traffic.
  • Configure mobile phone usage and video calling options – You can configure your router to limit access to devices or limit phone usage by disabling video calling. This will prevent bandwidth from running out.
  • Create an email address for authentication purposes – This will allow you to receive a confirmation email from the system upon successful login.
  • Define IP addresses allowed – You can create a blacklist and whitelist where you will deny or allow access to certain IP addresses or subnets.
  • Adjust the portal behavior settings to sort out interaction desired with users – This is a setting to interact with users. It will gauge the behavior during login, and after a timeout period with no recorded activity, users will be logged out or encounter an error.

Ultimately, if you’re still unable to access the Wi-Fi connection because of the captive portal warning message, there isn’t much you can do if you’re not in control of the router.

If you’ve been successful, we’d recommend you take the necessary steps to safeguard your device when accessing public networks. You should also consider getting a random MAC address in situations where you have to reveal your IP address.

Did you find a way to get past the captive portal warning? If you have tried any of these methods and were able to get through the captive portal warning, please let us know in the comments below.

DHCP vs. Static IP: What’s the Difference Between Them?

Confused about DHCP and Static IP addresses? Understanding the difference is crucial whether you’re setting up a home network or making sense of your work environment. This guide aims to demystify DHCP and Static IP addresses, focusing on their benefits, drawbacks, security implications, and how you can identify which one you’re using.

What are DHCP and Static IP Addressing?

Before diving into the complexities, it’s vital to establish a foundational understanding of DHCP and Static IP addressing. Check out this informational guide if you need to understand IP addresses better.

  • DHCP (Dynamic Host Configuration Protocol): It’s an automated system that assigns IP addresses to network devices. The address can change over time, making it a dynamic IP address.
  • Static IP: As the name implies, a static IP address doesn’t change. It is manually set up and remains constant.

Advantages and Disadvantages

DHCP IP Advantages:

  • Automatic Configuration: DHCP takes care of the IP address assignment automatically. Unlike a static address, the dynamic IP address changes automatically. 
  • Easy to Manage: Ideal for large networks where manual configuration would be time-consuming. Commonly used in business networks by network administrators. 

DHCP IP Disadvantages:

  • Unpredictable IP Changes: Devices might experience disruptions due to frequent IP changes. That’s one of the most encountered issues regarding dynamic addresses. 
  • Potential IP Conflicts: Rare but possible, two devices could end up with the same IP.

Static IP address Advantages:

  • Consistency: Because it never changes, services relying on specific IP addresses run without interruption. 
  • Direct Accessibility: A static address is handy for remote server maintenance. Useful for Internet service providers and file servers. 

Static IP address Disadvantages:

  • Manual Configuration: Every device must be manually set up. Depending on the network size, one or more network admins must configure it on every device. This is especially problematic for enterprise networks. 
  • Network Complexity: Not ideal for large networks due to the management difficulty and possible network issues.

Security Implications

When it comes to security, each has its strengths and weaknesses:

  • DHCP IP: While easier to set up, it’s also easier for malicious actors to join the network.
  • Static IP: Slightly more secure as unauthorized devices won’t automatically get an IP address. However, it’s not foolproof.

How to Identify Your IP Configuration

For Windows Users:

  1. Press Windows Key + R to open the Run dialog box.
  2. Type cmd and press Enter.
  3. In the command prompt, type ipconfig /all and press Enter.
  4. Look for DHCP Enabled. If it says Yes, you’re on DHCP. If No, it’s a Static IP address.

For macOS Users:

  1. Go to Apple Menu > System Preferences > Network.
  2. Choose your network and click Advanced.
  3. Under the TCP/IP tab, Using DHCP means you’re on DHCP. Otherwise, it’s a Static address.

Conclusion

Understanding DHCP and Static IP isn’t just for tech geeks; it’s beneficial for anyone using a network. While DHCP offers automation and ease, Static IP provides stability and some security advantages. If you’re more interested in security, we have guides for setting a static IP in Windows 10 and Windows 11.

Disabling static IP can help with errors such as ERROR_IP_ADDRESS_CONFLICT2, so don’t hesitate to change this setting.

Depending on the network settings, that also applies to mobile devices. Identifying which one you’re using is a few clicks away, so you can make informed decisions about your network management & configuration.

Fix: The Network You Are Using May Require You to Visit its Login Page

You connect to a Wi-Fi network but when you open a browser, you get the message The network you are using may require you to visit its login page. All of the editors at Windows Report have faced this message at least a few times but we know how to fix it quickly.

Why does Wi-Fi require you to visit its login page? The Wi-Fi requires you to visit the login page because most likely you’re using a public Wi-Fi network that is running a so-called captive portal that requires accepting some terms of service.

How do you fix Wi-Fi that requires login?

Before getting deeper into our solutions devised by the WR networking team, try a few workarounds:

  • Try opening another browser. If the other one doesn’t bring up The network you are using may require you to visit its login page, then reset the browser you have been using before.
  • Double-check if your device is connecting to your private network and not a different one. Read below to see how you can force your device to forget a network.
  • Check if other devices can connect to the same hotspot and see if they receive the same message. If not, the solutions below will help you fix the device you’re using.

1. Reset the network settings

  1. Left-click the Start button, type powershell, and click Run as administrator.
  2. Click Yes on the User Account Control prompt.
  3. Then, copy and paste the following lines and press Enter: netsh int ip reset
  4. Now, paste or type the following command and run it by pressing Enter to flush the DNS cache: ipconfig /flushdns

Assuming that your network settings have been altered and now lead to a captive portal, this solution will bring everything back to normal. It works on both Windows 11 and 10 seamlessly and you won’t see any network login screen or a portal login in your browser.

We also have a complete guide on how to reset the TCP/IP stack on Windows 11 that will help you with more methods of doing that.

2. Forget the hotspot and reconnect to your own

  1. Click the Start button and go to Settings.
  2. Now, click on Network & internet from the left and select Wi-Fi from the right.
  3. Next, choose Manage known networks from the right pane.
  4. You will see a list of present and past used Wi-Fi network locations. Click Forget on all of them but make sure you’ve got the password to your own hotspot that you want to connect to.
  5. Now, reconnect to your hotspot using the password. If you haven’t changed it before, it’s the one printed on the back of your router or modem.

If the hotspot you connected to lately was set to auto-connect, you might see The network you are using may require you to visit its login page message, but if your PC forgets that connection, it won’t be able to do that again.

On Windows 10, you can do the same by navigating to Settings > Network & Internet > Wi-Fi > Manage known networks. If a website is not accessible, read this guide to learn how to get through.

3. Reset your browser to factory defaults

Note icon NOTE
This solution will reset all the settings and passwords in Google Chrome and will remove all the add-ons.
  1. Open Chrome, type the following line into the address bar and press Enter: chrome://settings/reset
  2. Now, click on Restore settings to their original defaults.
  3. Finally, click on Reset settings to acknowledge the change.

We used Google Chrome as an example because it’s the most popular browser, but all the modern browsers have the reset feature in their Settings menus.

If you don’t want to fully reset your browser, you can start by deleting the browser cache and cookies, removing any proxies, and uninstalling any add-ons you might have loaded recently.

So, by following the solutions tested by the WR software team, you will get rid of any captive portals and your internet connections should be back to normal.

Usually, resetting the internet settings and flushing the DNS should work but, in some cases, you also need to get rid of the problematic hotspot or reset your browser.

If your Windows 11 PC can’t connect to a network, the highlighted guide will help you with the right solutions.

In case you’re facing the Network Change Detected error, read this article for methods to fix it. 

Go to the comments section below and leave us a note if you have further questions.

How to Remove Duplicate Windows Firewall Rules

Duplicated Windows Firewall rules can cause confusion, especially if you’re manually configuring your firewall, and in some cases, it can cause certain applications or services to stop working.

It’s possible to fix this issue, and in this guide, we’ll show you a couple of methods that you can use, so let’s get started.

Where are Windows Defender Firewall rules stored?

You can find your firewall rules stored in the following key in your registry at the following path: Software\Policies\Microsoft\WindowsFirewall\FirewallRules

How do I delete duplicate rules in Windows Firewall?

1. Manually delete the rules from firewall settings

Note icon NOTE
Deleting certain rules might lead to network issues, so remove them at your own risk.
  1. Press the Windows key + S and enter defender. Select Windows Defender Firewall with Advanced Security.
     
  2. From the left pane, select Outbound Rules or Inbound Rules.
  3. Select multiple rules by using Shift or Ctrl and the left mouse button.
  4. Once you’ve selected duplicate firewall rules, right-click them and choose Delete.
  5. When asked to confirm, click on Yes.
  6. Repeat these steps for all rules you want to remove.

Instead of deleting rules, it might be a better option to disable them instead. That way if anything goes wrong, you can enable these rules again.

2. Use the script to remove Windows Firewall rules

  1. Open Notepad.
  2. Paste the following code:
    # Here we use `netsh advfirewall firewall show` to get all firewall rules, since it's way faster than Get-NetFirewallRule!!!!!!! $output = (netsh advfirewall firewall show rule name=all verbose | Out-String).Trim() -split '\r?\n\s*\r?\n' $propertyNames = [System.Collections.Generic.List[string]]::new() $objects = @( $(foreach($section in $output ) { $obj = @{} foreach( $line in ($section -split '\r?\n') ) { if( $line -match '^\-+$' ) { continue } $name, $value = $line -split ':\s*', 2 $name = $name -replace " ", "" $obj.$name = $value if($propertyNames -notcontains $name) { $propertyNames.Add( $name ) } } $obj }) | % { foreach( $prop in $propertyNames ) { if( $_.Keys -notcontains $prop ) { $_.$prop = $null } } [PSCustomObject]$_ }) $r = $objects | Group-Object -Property RuleName, Program, Action, Profiles, RemoteIP, RemotePort, LocalIP, LocalPort, Enabled, Protocol, Direction # If you want to take a look # $r | ?{$_.Count -gt 1} | Select-Object -ExpandProperty group | Out-GridView $r | ?{$_.Count -gt 1} | %{ $name = $_ | Select-Object -ExpandProperty group | Select-Object -ExpandProperty RuleName -First 1 # Here we have to use this cmdlet, since `netsh advfirewall firewall delete` can't differentiate rules with the same names and will delte them all! Get-NetFirewallRule -DisplayName $name | Select-Object -Skip 1 | Remove-NetFirewallRule }
  3. Click on File and choose Save as.
     
  4. Set Save as type to All files and set the name of the file to firewall.ps1. Lastly, click Save.
  5. Press Windows key + S and type powershell. Select Run as administrator.
    Powershell Show The Folder Size on Windows 11Show The Folder Size on Windows 11
  6. Switch to the directory where your ps1 file is saved using the cd command like this: cd C:\Users\WindowsReport\Documents
  7. Next, type firewall.ps1, and the script should start and remove duplicate entries.

Keep in mind that this is an advanced solution, so you should use it only if you have some basic knowledge of the PowerShell commands and you understand what the script does.

Tips for cleaning Windows Firewall rules

  • Review the rules before you remove them. Many rules aren’t duplicates, and they are configured to work with different protocols or ports.
  • Instead of deleting, it’s always better to disable a rule and check if any issues appear after doing so.
  • Remove only redundant rules or unused ones.
  • Label and organize rules properly. Arrange rules by priority or functionality.

Duplicate Windows Firewall rules shouldn’t concern you, especially if you didn’t manually create them. Despite looking almost the same, likely, rules aren’t duplicates, so don’t delete them unless you’re 100% certain and you know what the rules in question are doing.

In case you want to learn more about Windows Firewall, you can use it to check if firewall is blocking a port or a program or you can configure Windows Firewall to allow IP ranges on your PC.

Speaking of which, you can even configure firewall rules for Windows activation to ensure that no issues occur during the process.

Have you encountered duplicate Windows Firewall rules on your PC and how did you handle them? Share your findings with us in the comments section.

Solved: Get Help Not Working on Windows 11

The Get Help app allows users to find answers to all their queries and connect to Microsoft support, but for some, it’s not working in Windows 11. Though not a major problem for most, it does affect users facing issues with the OS.

Besides, its recent integration with Windows troubleshooters makes it all the more important to have Get Help running. For those wondering why Get Help is not opening, it’s usually due to corrupt system files, issues with the OS, problems with the network, or even the app itself.

How do I fix the Get Help app if it’s not working on Windows 11?

Before we start with the slightly complex solutions, try these quick ones first:

  • Restart the computer and see if Get Help still throws an error message. Also, check for updates and install any new available version of Windows.
  • Verify whether Get Help works in a clean boot environment. In case it does, one of the third-party programs or services are conflicting with it.
  • Check whether Windows Firewall is blocking the app and, if that’s the case, whitelist Get Help. Also, eliminate issues with the network connection.
  • Disable any proxy servers set up on the PC.

If none work, move to the fixes listed next.

1. Repair the corrupt system files 

  1. Press Windows + R to open the Search menu, type Command Prompt in the search bar, right-click on the relevant result, and select Run as administrator.cmd
  2. Click Yes in the UAC prompt.
  3. Paste the following DISM commands one at a time and hit Enter after each:DISM /Online /Cleanup-Image /CheckHealth DISM /Online /Cleanup-Image /ScanHealth DISM /Online /Cleanup-Image /RestoreHealth
  4. Now, execute this command for the SFC scan: sfc /scannowsfc scan to fix get help not working windows 11
  5. Once done, restart the computer.

Corrupt system files are a common reason a built-in app or Get Help is not working in Windows 11. And running the DISM commands and SFC scan will help!

This whole process can be simplified by using specialized third-party repair tools. This software is specially designed to repair and replace broken system files.

2. Download Microsoft Edge WebView2

Tip icon Tip
If you get an error during the installation, try another method (of the three available) to download the component.
  1. Go to Microsoft Edge Developer, and click the Download Now option to get Microsoft Edge WebView2.Microsoft Edge WebView2 to fix get help not working windows 11
  2. Now, choose any of the methods to proceed with the download, be it via the Evergreen Bootstrapper, Evergreen Standalone Installer, or the Fixed Version.
  3. Once done, run the setup and follow the on-screen instructions to complete the installation process.

3. Repair or Reset the Get Help app

  1. Press Windows + I to open Settings, go to Apps from the navigation pane, and click Installed apps.installed apps
  2. Locate Get Help, click on the ellipsis next to it, and select Advanced options.advanced options
  3. Click the Repair button and check for improvements.repair
  4. If that doesn’t work, click on Reset.reset app to fix get help not working windows 11
  5. Again, click Reset in the confirmation prompt to get rid of any common issues with Get Help.

For detailed instructions on using Microsoft’s built-in support tool, check out our complete guide on the Get Help app in Windows 11.

4. Reset the network settings

  1. Press Windows + I to open Settings, go to Network & Internet from the left pane, and click on Advanced network settings.advanced network settings
  2. Now, click Network reset.
  3. Click the Reset now button.reset now to fix get help not working windows 11
  4. Finally, click Yes in the confirmation box. 

5. Reinstall the Get Help app

  1. Press Windows + R to open Run, type powershell, and hit Ctrl + Shift + Enter.powershell
  2. Click Yes in the UAC prompt.
  3. Now, paste the following command and hit Enter to uninstall Get Help: Get-AppxPackage *Microsoft.GetHelp* -AllUsers | Remove-AppxPackageuninstall get help
  4. Once done, open the Microsoft Store, type Get Help in the search box, and open the app from the results.get help
  5. Click the Get button to download the app.get

When Windows Get Help is not working, and the problem seems to be with the app itself, reinstall it. You can’t remove Get Help through conventional methods since it’s a default app, but force uninstalling via PowerShell works in this case!

6. Perform an in-place upgrade

  1. Go to Microsoft’s official website, choose the product language and OS edition, and then download the Windows 11 ISO.iso
  2. Double-click the downloaded ISO, wait a few seconds and then click Open in the prompt that appears.
  3. Now, run the setup.exe file.setup.exe
  4. Click Next to proceed.
  5. Now, check the Windows 11 license terms, and click Accept.
  6. Verify the setup reads, Keep personal files and apps, and click Install.in-place upgrade to fix get help not working windows 11
  7. Wait for the process to complete. It may take a few hours.

For problems with any of the Windows components, including when Get Help is not working in Windows 11, an in-place upgrade will help. And you won’t lose any files or apps in the upgrade process!

7. Contact support online

When nothing else works, you can always get help in Windows 11 through other means. Microsoft has introduced the Get Started app, and there are several online forums, both official and those run by users.

Besides, you can contact Microsoft support online through the official website. 

While Get Help serves an important role and should be working in Windows 11, it’s not the only way to fix issues. You can always refer to official online channels or come to us for Windows-related problems. We have extensively covered the operating system.

You can also learn how remote assistance works in Windows by checking the Remote Help App guide which explains how support teams use secure screen sharing and control features.

A more complex problem, though, is when How to get help in Windows keeps popping up, and to fix it, you need to modify the file permissions.

For any queries or to share what worked for you when Get Help is not working in Windows 11, drop a comment below.

ProductInfo.dll: What is it & How to Fix its Bad Image Error

If you spot a suspicious process like ProductInfo.dll in your processes list in the Task Manager, your system’s security may have been compromised. It’s also possible that the DLL file is legitimate but it has just been corrupted.

Luckily, fixing DLL errors is relatively easy and shouldn’t take up too much of your time.

What is ProductInfo.dll?

ProductInfo.dll is a file associated with the A-Volute_3D_Sound_Experts software. It is used by the program to store data related to various functions used in the application. The program’s main purpose is to provide immersive sound experiences through sound technology and audio processing algorithms.

You’ll likely find it in the following directory: C:\ProgramData\A-Volute\A-Volute.28054DF1F58B4\Modules\ScheduledModules

How do I fix ProductInfo.dll bad image error?

1. Use a third-party DLL fixer

ProductInfo.dll, is a non-system file and mostly occurs due to compatibility issues between your PC and the file. This means to find a missing DLL file, you may have to attempt a bunch of solutions before you get a fix.

Since this takes a significant amount of time, we recommend using a DLL-repair tool. Such tools are great for fixing such issues and ensuring the files are in sync.

2. Run DISM and SFC scans

  1. Hit the Start Menu icon, type cmd in the search bar, and click Run as administrator.cmd-run-admin-w11 unexpected kernel mode trap windows 11
  2. Type the following commands and press Enter after each one:DISM.exe /Online /Cleanup-Image /Restorehealth sfc /scannow

3. Re-register the DLL file

  1. Hit the Windows key, type Command Prompt right-click on it, and select Run as administrator.cmd-run-admin-w11 unexpected kernel mode trap windows 11
  2. Type the following command and press Enter:
    regsvr32 ProductInfo.dll
  3. This command registers the missing DLL file. However, if more than one DLL file is not registered, you can use the following command:
    for %1 in (*.dll) do regsvr32 /s %1

4. Download the file manually

You can fix this error by downloading the right version of the ProductInfo DLL file. Here, you’ll have to check your Windows version and download the appropriate DLL file for 32-bit or 64-bit depending on yours.

Since you cannot verify the authenticity of the site, ensure you have a comprehensive antivirus software and that it is up-to-date. Once downloaded, locate the file and move it to the ProductInfo file directory. Also, make sure to delete the previous corrupted one.

Note icon NOTE
The DLL-files.com site is not an official source, and WindowsReport is not affiliated with it in any way. If you download the file, be sure to run an antivirus check.

5. Scan for viruses

  1. Press the Windows key, search Windows Security, and click Open.
  2. Select Virus & threat protection.
  3. Next, press Quick scan under Current threats.
  4. If you don’t find any threats, proceed to perform a full scan by clicking on Scan options just below Quick scan.Scan options
  5. Click on Full scan, then Scan now to perform a deep scan of your PC.Full Scan Scan Now
  6. Wait for the process to finish and restart your system.

6. Uninstall the associated program

The ProductInfo.dll must be part of a program so you can locate its uninstaller file in its directory, run the uninstaller and remove it. Alternatively, you can use the Control Panel or the Settings app to remove its parent program.

When uninstalling, also ensure to remove remnant files that may have corrupted the file so that when you reinstall the application and replace the file, they’re not reused to re-register it.

7. Perform a System Restore

  1. Press the Windows key, type Control Panel, and click Open.control-panel-search fallout new vegas runtime error
  2. Select Large icons as View by and click Recovery.Recovery Control Panel Advrcntr6.dll
  3. Click Open System Restore.Open system restore
  4. Select Choose a different restore point and click Next.Next Choose a different restore point
  5. Now select the restore point and click Next. Choose a point
  6. Click Finish to restore the previous settings, and Windows will restart.Finish Restore point

What are other tips and considerations when troubleshooting ProductInfo.dll errors?

  • Update drivers – ProductInfo.dll errors can cause problems with your computer, such as slow performance, errors during installation or startup and more. Updating related drivers can boost the performance of your PC.
  • Check for Windows Updates – Outdated system files can cause DLL errors, so make sure that you have the latest updates from Microsoft.
  • Repair corrupt Registry entries – Sometimes things go wrong with your PC’s database that could end up in corrupt registry entries. If not repaired in time, ProductInfo.dll errors can occur. You can avoid this by using a reputable registry cleaner program.
  • Disable firewall/antivirus temporarily – If the associated program with the DLL file was not installed properly, it may have compatibility issues with your antivirus. You can either disable Windows Defender temporarily or allow it through the firewall.
  • Limit CPU processes – Some DLL files have been known to cause issues because they use a large amount of CPU resources when running. You can end the process or limit its CPU usage.

The easiest way to avoid getting ProductInfo.dll errors is simple. You should never download and install programs on your computer before running an antivirus program.

We hope this article has provided you with all the information you need to effectively troubleshoot and potentially fix your ProductInfo.dll error messages. And should you encounter system DLL errors like the sysmain.dll or version.dll, feel free to check out what approach to take to resolve them.

Our latest guide covers rnd.dll, so don’t miss it for more useful information.

Have you managed to fix this DLL error? We’d like to know which solution was the easiest for you. Let us know in the comment section below.

Event 4502 WinREAgent on Windows 11: How to Fix

Several users reported the Event 4502 WinREAgent message on their PC, and even though this error didn’t cause any issues, it still had users worried.

In today’s guide, we’re going to take a closer look at this error, see what it means, and show you a few potential methods you can use to fix it.

What is the event ID 4502?

  • This is an error message that appears in Event Viewer.
  • It’s usually caused by a Windows Update.
  • A recovery partition that’s too small can give you this error.

How do I fix event 4502 WinREAgent on Windows 11?

1. Perform a system restore

  1. Press the Windows key + R and enter rstrui.
    rstrui command Restore point Taskbar Thumbnail Preview Disappears too Quickly on Windows 11
  2. This will open the System Restore window. Click on Next.
  3. Select the desired restore point and click Next.
  4. Follow the instructions on the screen to complete the process.

2. Remove recent Windows updates

  1. Press the Windows key + I to open the Settings app.
  2. Next, select Windows Update and choose Update history.
    update history steamwebhelper.exe
  3. Select Uninstall updates.
    uninstall updates to fix 0xc000009a
  4. Select the update you want to remove, click Uninstall, and follow the instructions on the screen.
    how to uninstall windows 11 update button

3. Change the size of the recovery partition

Note icon NOTE
This is an advanced solution and you’re using it at your own risk. We’re not responsible for any issues that might occur.
  1. Press the Windows key + S and type cmd. Select Run as administrator.
    CMD elevated -Valorant Not Uninstalling on Windows 11
  2. Run the following command to see the info regarding the recovery partition and be sure to save this information since you’ll need it later: reagentc /info
     
  3. Next, you need to disable this feature by running reagentc /disable

Now we need to remove the recovery partition by doing the following:

  1. In the same command line run: diskpart
  2. Next, you need to show all available drives with list disk
  3. Select the disk where your OS is installed. In our example it’s the number 0, so we used: sel disk 0
  4. List all partitions with list part
  5. Now select your system partition. In our example that’s number 3, so we used sel part 3
  6. Now shrink the partition with the following command: shrink Desired=500 Minimum=500
  7. Select the system recovery partition. On our PC that’s number 5, so we used: sel part 5
  8. Now delete it by running: delete partition override
  9. Create a new partition with create partition primary
  10. Next, format the drive with the following command: format fs=ntfs quick
  11. Run the following commands to assign the attributes and drive letter:
    set id=de94bba4-06d1-4d40-a16a-bfd50179d6ac
    gpt attributes=0x8000000000000001
    assign letter=R
  12. Exit diskpart with exit

Lastly, we need to recreate the recovery partition:

  1. Now copy the necessary data with these commands:
    mkdir R:\Recovery\WindowsRE
    xcopy /h C:\Windows\System32\Recovery\Winre.wim R:\Recovery\WindowsRE
    reagentc /setreimage /path R:\Recovery\WindowsRE /target C:\Windows
  2. Enable WinRE with the following command: reagentc.exe /enable
  3. Lastly, check if WinRE is on the right partition by running reagentc.exe /info

Event 4502 is usually just a message in Event Log and if it doesn’t cause you any problems, you shouldn’t try to fix it. Removing updates can temporarily help, but if the issue reappears, you might have to change the size of the recovery partition.

To better understand this issue, we suggest reading our guide on the $WinREAgent folder. Unfortunately, these aren’t only event issues, and many reported Event ID 16 and Event ID 4663, but we covered those in earlier guides.

Did you ever encounter event 4502 WinREAgent and how did you fix it? Share your solutions with us in the comments below.

Solved: Windows 11 Touchscreen Stops Working in Tablet Mode

While it’s an exciting functionality that enhances the overall experience, a few users found that the touch screen is not working in tablet mode. For most, it worked fine in laptop mode, but as soon as they flipped the screen, it wouldn’t respond to touch input.

The problem could appear when flipping the screen beyond a specific angle. Besides, the issue was also present in ChromeOS and across manufacturers, be it HP, Dell, Lenovo, or Acer, amongst others. 

But first, verify whether your laptop has the functionality. We are frequently asked, why does my laptop have tablet mode but no touch screen. It’s because the feature is native to the operating system, but for it to work, you will also need compatible hardware, i.e., a screen that responds to touch.

Why does my touchscreen work in normal mode but not in tablet mode on Windows 11?

  • Corrupt or outdated touchscreen drivers
  • Bug in the installed Windows updates
  • Third-party apps triggering conflicts
  • Hardware issues, usually loose or damaged cables

How do I fix my Windows 11 touchscreen if it’s not working in tablet mode?

Before we start with the slightly complex changes, try these quick ones first:

  • Check whether the tablet touchscreen is working in the BIOS. If it is, the problem lies with the software side of things. Otherwise, it’s most likely a hardware issue.
  • Verify whether the touch functionality stops working at a specific angle when the screen is rotated. This, too, may signal a hardware problem where the cables around the hinges are unable to identify or process touch input.
  • Install the latest Windows updates. Also, if the touch screen is not working in ChromeOS, downloading the latest OS version will work.
  • In case you have a screen protector, remove it and check for improvements. 
  • Check for corrupt system files and repair them. Also, uninstall apps that were added recently. 

If none work, head to the fixes listed next.

1. Reinstall the touchscreen drivers

  1. Press Windows + R to open Run, type devmgmt.msc in the text field, and hit Enter.
  2. Expand the Human Interface Devices entry, right-click on HID-compliant touch screen, and select Uninstall device.uninstall device to fix touch screen not working in tablet mode
  3. Again, click Uninstall in the confirmation prompt that appears.uninstall
  4. Restart the computer and verify whether the touchscreen in tablet mode is still not working.

2. Update the drivers

  1. Press Windows + X to open the Power User menu, and select Device Manager from the list of options.
  2. Double-click the Human Interface Devices entry, right-click on HID-compliant touch screen, and choose Update driver.update driver to fix touch screen not working in tablet mode
  3. Click on Search automatically for drivers and wait for Windows to install the best version available locally.search automatically
  4. If that doesn’t work, again go to the Update Driver window, and select Browse my computer for drivers.
  5. Click on Let me pick from a list of available drivers on my computer.pick driver
  6. Select any HID-compliant touch screen drivers listed here, and click Next.install driver to fix touch screen not working in tablet mode
  7. Follow the on-screen instructions, and once the driver is installed, restart the computer.

For Windows 11 tablet mode to work effectively, you will need the latest drivers. And if you ever find the touch screen drivers missing, manually updating them will do the trick! 

Besides, if there are no drivers available on the PC, go to the manufacturer’s website, download the latest version, and manually install the driver.

3. Modify the Registry

  1. Press Windows + S to open Search, type Registry Editor in the search bar, and click the relevant result.
  2. Click Yes in the UAC prompt.
  3. Navigate the following path or paste it in the address bar and hit Enter: HKEY_CURRENT_USER\Software\Microsoft\Wisp\Touchpath
  4. Now, double-click the TouchGate DWORD on the right.touchgate
  5. Under the Value data field, enter 1, and click OK to save the changes.value data to fix touch screen not working in tablet mode
  6. Restart the computer and check whether the touch screen now starts working in tablet mode.

4. Perform a system restore

  1. Press Windows + R to open Run, type rstrui.exe in the text field, and click OK.rstrui.exe
  2. Select Choose another restore point and click Next.
  3. Pick the oldest restore point from the list and click Next.restore point
  4. Finally, verify the details and click Finish to start the restore process.

If the touch screen is not working in Lenovo or when you switch to tablet mode in Windows 11, restoring the system to a point where the issue doesn’t exist will help! Remember, this will only fix software-related problems.

5. Contact the manufacturer

When nothing else works, it’s most certainly a hardware problem to blame. Identify whether the functionality doesn’t work on the entire screen or just a part of it.

At this point, the only viable solution against an unresponsive touch screen is to contact the manufacturer. If still under warranty, they might replace the screen or repair the damaged cables and sensors. Or you could contact a local hardware shop that specializes in repairs. 

Remember, tablet mode on Windows 11 works differently than the previous iterations. Now, it kicks in automatically when the screen is rotated. This eliminates a lot of problems but doesn’t work against hardware or technical issues.

Once things are up and running, consider calibrating the touch screen in Windows 11 for the best performance and to personalize the experience.

We also have a guide on what to do if your Lenovo touchscreen is not working, so don’t miss it for more solutions.

For any queries or to share which fix worked for you, drop a comment below.

Do Eero Routers Support OpenVPN? All You Need to Know

Are you wondering if your Eero router supports OpenVPN? Unfortunately, we have bad news: Eero routers don’t natively support OpenVPN.

However, a couple of workarounds exist for using VPN services on your network. This straightforward guide breaks down the alternatives and provides a step-by-step guide for setting up a VPN on your Eero router system.

How to Install OpenVPN on Eero Router?

The Eero ecosystem prioritizes user-friendliness and simplicity, so it doesn’t offer direct support for complex setups like OpenVPN. However, you’re not entirely out of options. Below, we will take a look at how to use a VPN with your Eero router by using a few tricks that we tried and tested on our own.

There are two options that we could think of and that we also encountered when researching the subject.

1. Use a VPN-Enabled Router as a Bridge

  1. Purchase a VPN-Compatible Router: Get a router that supports OpenVPN. Popular options include Asus, Netgear, and Linksys models (if you already have one at home – even better)
  2. Connect the VPN Router: Attach your VPN-enabled router to one of the Ethernet ports on your Eero router.
  3. Configure the VPN Router: Open a web browser and type in the IP address of your new router to access its admin panel. Then, configure it to run OpenVPN.
  4. Set the VPN Router as a Bridge: Navigate to the Eero app, locate the new router in the connected devices list, and set it to function in Bridge Mode.
  5. Connect Devices: Once the setup is complete, connect your devices to the VPN-enabled router to take advantage of OpenVPN encryption.

2. Use a VPN Service on Individual Devices

  1. Select a VPN Service: Choose a VPN provider that supports OpenVPN, such as NordVPN or ExpressVPN. For a comprehensive guide on other VPN options and installation processes, see our article and learn how to install VPN on Eero routers.
  2. Download the VPN App: Visit the provider’s website or app store to download and install the VPN application on each device you wish to protect.
  3. Connect to VPN: Open the VPN app and connect to a server, ensuring that OpenVPN is selected as the protocol.

While understanding the compatibility of OpenVPN with Eero routers, exploring a broader range of VPN options is also beneficial. Discover the best VPNs for Eero routers in our comprehensive guide.

This option doesn’t protect all devices on your Eero network but is more accessible for those uncomfortable tinkering with hardware settings.

While Eero routers don’t offer native OpenVPN support, you can still maintain a secure and encrypted network by using a VPN-enabled secondary router or installing VPN software directly on your devices. Either approach will ensure your online activities remain private and secure.

Posted in VPN

How to Turn a Router Into an Access Point

You can always turn wireless routers into access points but note that not all access points can function as routers. In this article, our WR networking team will provide simple methods to set your Netgear, Asus, TP-Link, Linksys, Belkin, Orbi, and other brand routers as access points.

Benefits of turning a router into an access point:

  • Achieve better wireless coverage.
  • Provide wireless access to more devices on the same network.
  • You get more Ethernet ports for other wired connections.

How do I convert my router into an access point?

1. Connect your modem and router with an Ethernet cable

  1. Plug in the router adapter and power up your device.
  2. Connect an ethernet cable to the LAN port of your modem and the other connector into the WAN port of your router (the WAN port is usually colored yellow or red).
  3. Now, connect an Ethernet cable to one of the ports of your router and the other end to your PC or laptop.

Nowadays, the routers also create the wireless access point immediately and you can connect to the router wirelessly.

So, instead of connecting to your PC via cable, you may also find the access point in the list of Wi-Fi hotspots on your laptop and connect to it by using the access point SSID and password written on the back of the router. 

2. Configure the router as a wireless repeater

  1. Once you have connected your PC via cable or Wi-Fi, open a browser and enter the address or default IP address of the router. For example, https://192.168.2.1 for Belkin routers or https://192.168.0.1 for TP-Link routers. Read the manual of your router to find out what is the address for your router.
  2. Now, log in using the credentials supplied in the router manual. Usually, the user name is admin and the password is also admin. On some routers, you may also find this information printed on the back of the router as well.
  3. Now, if your router is connected to another router, the easiest way is to go to the Wireless settings, and in the Wireless Mode section, click on the drop-down menu and choose Wireless Repeater or Repeater.
  4. Your new router will copy all the connection settings from the main router and it will just broadcast the signal further without interfering.
  5. Save the settings and exit.

After this, you will have a single access point but two routers to deliver the signal independently. This way, you can have the main or primary router downstairs, for instance, and the repeater, connected with a cable upstairs.

By using a router as a wireless repeater, you will actually create a basic mesh network. Here’s our guide that highlights the differences between mesh networks and multiple access points.

3. Configure it as a stand-alone access point

Tip icon Tip
For this method, you will need the type of connection and settings from your ISP. You can also check out the modem connection settings and take them from there.
  1. Log into your router by using a browser and go to LAN or WAN settings.
  2. Here, you will need to access the connection settings: DHCP, PPoE, or Static (if you have a static IP address).
  3. After you have set up the connection, go to Wireless settings set up the SSID for your access point, and set up the security protocol and a strong password.
  4. In the end, save the settings. The router will reboot, and you will be able to use the wireless access point with your devices.

All the menus and settings depend on your router model and manufacturer. Some are simpler and others have more sophisticated settings. Some routers even have an Access Point section instead of setting a Repeater Mode. 

However, the essential procedure is the same for all the routers. The number of internet connections or connected devices depends on the number of channels of the router, the technology supported by them, and the available bandwidth.

If you stumble across conflicts with the router access point, this guide will help you fix it quickly.

Using a second router as an access point should provide more possible wireless connections and even more wireless networks if you want to.

You can even use a PC as a wireless extender, but it won’t be as efficient as a router.

Hopefully, now you managed to turn your router into an access point and you can connect all your devices wirelessly to the internet.

If you have any questions, don’t hesitate to drop us a line in the comments section below.

0x0000042b Error on Windows 11: How to Fix it

Xbox login errors like the 0x0000042b can stall any attempts to play games on your PC. Without an entry gateway, enjoying all that the Xbox app has to offer can be a thing of the past.

Still, this isn’t the end. With a little bit of tweaking, you should regain access to your account in no time.

What is 0x0000042b Error on Windows 11?

This is a login error when attempting to access your Xbox app or Xbox GamePass account. Some users can get past the login page, but after playing for a short while, the screen throws the 0x0000042b error.

It is typically triggered by bad drivers or hardware conflicts, but a corrupt DLL file or a virus infection can also be behind it.

How do I fix the 0x0000042b error on Windows 11?

A few checks to look out for before moving onto the somewhat technical steps include:

1. Restart related services

  1. Hit the Windows + R keys to open the Run command.
  2. Type services.msc in the dialog box and hit Enter.run services.msc command
  3. Locate Gaming Services, right-click on it, and select Properties.
  4. Under the Startup section, click on the drop-down menu and select Automatic.
  5. Hit Apply, then OK to save the changes.
  6. Repeat the same steps for IP Helper, Xbox Live Auth Manager, Xbox Live Game Save, and Xbox Live Networking Service.

2. Clear Xbox cache

  1. Press the Xbox button on your console.
  2. Select Settings.
  3. Click on Device & connections on the left.
  4. Select Blu-ray.
  5. Select Persistent Storage.
  6. Choose Clear persistent storage.

3. Re-register the DLL file

  1. Press the Windows key, type cmd, and click Run as administrator.DOS COmmand Prompt -amdppm.sys
  2. Type the following command to register the DLL file again and hit Enter:regsvr32 NvLddmkm.DLL
  3. Restart the computer and launch the Xbox app to ensure the issue is resolved. 

NvLddmkm is the associated DLL file for your NVIDIA driver, re-registering it will help fix any issues with missing or corrupt DLL files.

4. Run DISM and SFC scans

  1. Hit the Start Menu icon, type cmd in the search bar, and click Run as administrator.cmd-run-admin-w11 unexpected kernel mode trap windows 11
  2. Type the following commands and press Enter after each one:DISM.exe /Online /Cleanup-Image /Restorehealth sfc /scannow

5. Scan for viruses

  1. Press the Windows key, search Windows Security, and click Open.
  2. Select Virus & threat protection.
  3. Next, press Quick scan under Current threats.
  4. If you don’t find any threats, proceed to perform a full scan by clicking on Scan options just below Quick scan.Scan options
  5. Click on Full scan, then Scan now to perform a deep scan of your PC.Full Scan Scan Now
  6. Wait for the process to finish and restart your system.

6. Clean install the NVIDIA driver

  1. Before you download and install the NVIDIA drivers, ensure you close all unnecessary background processes, disable an overzealous antivirus/firewall, and disable any overclocking software.
  2. Navigate to your browser and download the corresponding NVIDIA driver for your OS.
  3. Locate the installation file, right-click on it, and select Run as administrator.
  4. Click Yes if the UAC prompt pops up and leave the default storage path as suggested.
  5. Agree to the terms and conditions.
  6. In the next window, select Custom (Advanced) install, then hit Next.
  7. Check the Perform a clean installation box then hit Next.
  8. Wait for the installation to finish, then restart your PC.

The reason behind a clean installation instead of a regular update of drivers is to ensure all previous entries are removed and replaced with newer compatible ones.

Note icon NOTE
Note that this step only applies if you have an NVIDIA GPU.

7. Reset the Xbox app

  1. Press the Windows key and click on Settings.
  2. Select Apps from the left side and click on Apps & features from the right.
  3. Type Xbox in the search box, hit Enter, click on the three-dot icon, and select Advanced options.
  4. Scroll down and under the Reset section and click on Reset.
  5. Windows 11 will reset the app.

8. Reinstall the Gaming Services app

  1. Click on the Start menu, type Windows PowerShell in the box and select Run as administrator.
  2. Select Yes when the User Account Control (UAC) prompt appears.
  3. Key in the following command in the console and press Enter to uninstall the Gaming Services app: get-appxpackage Microsoft.GamingServices | remove-AppxPackage -allusers
  4. Now, run the following command to open the Gaming Services app page in Microsoft Store: start ms-windows-store://pdp/?productid=9MWPM2CQNLHN
  5. Finally, click on the Get button to download the Gaming Services app once more.

Hopefully, you were able to fix the 0x0000042b error that your were facing on Xbox. If none of them were successful, your hardware might be failing. You’ll need to run a hardware disgnostic test to pinpoint the problematic component.

Unfortunately, Xbox sign-in errors happen in different variations such as error code 0x80a30204 but luckily, the fixes aren’t too hard.

You can tell us which solution worked for you by commenting below. In addition, if you tried any other unmentioned fix, we would like to hear your stories and see if you can help others fix their 0x0000042b login error.

Fix: XP-PEN Calibration is Not Working

If the XP-PEN calibration is not working, you won’t be able to use your pen properly, or it might not even work at all. This can be a major problem and it will make your tablet almost useless.

Although this can be a problem, there are ways to fix this issue, and in today’s guide we’re going to show you the best methods to do that, so let’s get started.

Why is my XP-PEN not working properly?

  • There might be a glitch with the primary display or your device isn’t saving calibration changes.
  • The tablet and display aren’t using the same scaling settings, so you need to adjust monitor preferences.
  • Your device isn’t properly configured in the XP-PEN calibration software.
  • Issues with the tablet driver.

How do I fix my XP-PEN calibration?

Before we try to fix the calibration issue, there are a few quick solutions you might want to try:

  • Start the XP-PEN app before you connect the tablet using the USB cable. This will restore the current calibration settings.
  • Make sure you save calibration settings by clicking OK after calibrating the pen in the calibration tool.
  • Set your tablet as the primary monitor. Wait for a few seconds and then set the correct screen as the primary monitor again.

1. Disable scaling

  1. Press the Windows key + I to open the Settings app.
  2. Navigate to System and choose Display. This will open the display settings.
  3. Lastly, locate the Scale option and set it to 100%.

Keep in mind that for the pen to be calibrated properly, both the tablet and your display need to use the same scaling value.

2. Change settings in the CLIP software

  1. In the CLIP software, go to File and select Preferences.
  2. Navigate to the Tablet tab.
  3. From there enable Set tablet operation area with application and choose the desired monitor.
  4. You might want to experiment with other tablet settings to fix this issue.

3. Reinstall the driver

  1. Press Ctrl + Shift + Esc to open Task Manager.
  2. Locate the PenTablet process, right-click it, and choose End Task.
  3. Next, delete the wintab32.dll file from the following locations: C:\Windows\System32
    C:\Windows\sysWOW64
  4. After that, press the Windows key + X and choose Device Manager.
  5. Locate the XP-PEN driver, right-click, and choose Uninstall device.
  6. Check Attempt to remove the driver for this device and click Uninstall. This will remove the current drivers.
  7. Lastly, go to the XP-PEN download page, locate your device, and download the latest driver for your device.

If XP-PEN calibration is not working, the issue is most likely related to scaling or device settings, and it can be easily fixed. This isn’t the only issue, and many reported that the XP-PEN is detected as a keyboard but we covered that issue in a separate guide.

This isn’t the only device that is affected, many users reported that their Surface Pen is not working properly.

Did we miss a solution that worked for you? If so, don’t hesitate to let us know in the comments section.

Uninstalling Edge in Windows 11 Breaks Apps & Widgets, Microsoft warns

Microsoft Edge Chromium, the web browser built into Windows 11, is a core part of the operating system. This means that you cannot uninstall it using conventional methods. But you can uninstall Edge insider versions such as Beta, Dev, and Canary.

Recently, we noticed that Microsoft started triggering a new warning when uninstalling Edge Dev/Canary insider versions in Windows 11 to state that apps and widgets that depend on Edge won’t work when you uninstall it.

Microsoft Edge powers web search in the Start menu, apps, and widgets you use, such as Microsoft News, Weather, Calendar, and more. These are designed to work with Edge. If you uninstall it, they’ll stop working or even disappear.

Here’s the warning we received when uninstalling both the Dev and Canary versions:

Uninstall Microsoft Edge? When you uninstall Microsoft Edge, your apps and widgets that depend on Edge will no longer be available.

Uninstall Edge apps and widgets no longer be available warning

The dialog offers Uninstall and Cancel options with a Learn more link that takes you to the Apps and Widgets that depend on Microsoft Edge support page created on August 7, 2023.

The support page details PWAs, sites as apps, and widgets that run on the Microsoft Edge engine. They can be installed from the Microsoft Store, Edge add-on, or third-party websites. The page further explains:

All PWAs, sites as apps, and widgets run on the Microsoft Edge browser, which means they use the same web engine, settings, extensions, and features as the browser. For example, if you enable dark mode in Microsoft Edge, it will also apply to your PWAs, sites as apps, and widgets. If you sign into Microsoft Edge with your Microsoft account, it will also sync your PWAs, sites as apps, and widgets across your devices.

At the bottom of the article, Microsoft reiterates that uninstalling Edge causes PWAs, Apps, and Widgets to stop working:

Microsoft Edge is an essential part of Windows 10/11, and it is not recommended to uninstall it. If you uninstall Microsoft Edge, it will cause your PWAs, sites as apps, and widgets to stop working.

To avoid this, we recommend that you keep Microsoft Edge updated and installed on your device. If you have accidentally uninstalled Microsoft Edge, you can reinstall it from microsoft.com/edge/download.

Here is what the current Microsoft Edge uninstall dialog looks like:

Uninstall Microsoft Edge dialog

Have you seen the new Uninstall Microsoft Edge pop-up? Share your experience in the comments section below.

WhatsApp for Web will release a new Search by date feature

WhatsApp for Web will soon release a new Search-by-date option that will allow users to look up a past conversation using a specific date. The feature is under development, and it has not been released yet, but WABetaInfo, the one that spotted the feature, said it will come soon to WhatsApp for Web.

The site also had access to images showcasing how the feature will look like in WhatsApp for Web. Users can easily pick a specific date, and then all the conversations that happened on that date will show up. whatsapp search by date

The Search-by-date option is already live on WhatsApp for iOS, but it seems that Meta will expand it to the Web version, as well.

There isn’t yet a release date for it, but it might happen before the end of 2023.

WhatsApp’s Search-by-date: Why does it matter?

Well, the feature could be one of the most useful features ever released on WhatsApp Web, and this is not an exaggeration. The ability to quickly look at a past conversation at a specific time would greatly reduce the time spent looking for valuable information.

For example, if someone knows the date or the month of a specific WhatsApp conversation that holds valuable information, this feature will make it possible to find it in seconds, greatly reducing time and frustration. Plus, users won’t have to endlessly scroll through conversations to find specific info.

WhatsApp recently allowed users to join Channels, and the app will also get AI assistants, as Meta revealed last month. The AI assistants will use Bing to come up with real-time information on everything the users request.

They will be released to the platform at a later date, but coupled with this feature, WhatsApp could actually improve the experience of searching through conversations: imagine telling the AI to look up for a conversation that happened months ago.

5 Best Routers for Access Point [2026 List]

Any router with Wi-Fi can be used as an access point but choosing the best router for access point can be daunting. That is why, your Windows Report networking team has tested and provided the best ones for you.

Why use a router as an access point? It’s better to use a router for the access point because it can be configured for other purposes, paired up with a VPN, it provides access for more devices than a simple access point and it offers more security features.

What is the best router to use for access point?

TP-Link Archer A54 – Affordable and easy to install

  • 802.11n, 802.11b, 802.11a, 802.11g, 802.11ac protocols
  • Beamforming technology for wide coverage
  • Parental control features
  • 1200 Mbps of total available bandwidth
  • WPA3 latest security protocol
  • No USB ports

Archer A54 from TP-Link is a very popular router because it offers excellent performance as an access point and it has a very affordable price point.

From the tests performed by the WR networking team, A54 managed to provide a full signal in our lab and a steady Wi-Fi connection of around 700 Mbps on a 1 Gbps plan.

TP-Link’s router offers a maximum Wi-Fi speed of 867 Mbps so our number was pretty good.

The device was very easy to set up by following the instructions and it also provides 5 Ethernet ports for wired connections. It is one of the best choices for an AP router if you have a small home.

Netgear AX5400 – Wide area coverage

  • Speeds of up to 5.4 Gbps
  • 2,500 sq. ft. coverage
  • 802.11n, 802.11b, 802.11ax, 802.11a, 802.11ac, 802.11g protocols
  • 4 x 1Gbps Ethernet ports and 1 x 3.0 USB port
  • NETGEAR Smart Parental Controls (free trial service)
  • The user interface is pretty antiquated

Netgear’s AX5400 router is in a whole ballpark than its rival above, but it’s also a lot more expensive.

In the WR lab tests, this device was able to supply great signal from over 75 feet away and a wall in between.

We tackled that feature because the manufacturer advertises a 2,500 sq. feet Wi-Fi signal coverage and we must acknowledge that AX5400 is pretty potent in that aspect.

Another capability is holding 6 streams simultaneously which we also found to be true thanks to the Wi-Fi 6 technology and the Beamforming+ technology. If you have a large area and 10+ devices, this router is a great choice.

WAVLINK AC3000 – Up to 96 connections

  • Up to 64-96 connections
  • Tri-band Wi-Fi router
  • 5 GB Ethernet ports & 1 USB 3.0
  • MU-MIMO for gaming streaming
  • Very limited interface

Wavlink AC3000 is a triband Wi-Fi 6 router with one 2.4 GHz channel that can achieve 400 Mbps, one 5 GHz channel that offers an 867 Mbps connection, and a third, 5 GHz channel with up to 1733 Mbps speed.

The 8-antenna setting provides good coverage and it can be great for game parties because it can host up to 96 devices.

However, you also need great bandwidth from your internet service provider, otherwise, it will choke even on 10 devices.

The WR networking team has tested it over 4K streaming with great results and it’s a very good tri-band router for its price point.

Linksys EA8300 Max-Stream – Great for gaming

  • 802.11a/b/g/n/ac protocols
  • Up to 1,500 square feet of Wi-Fi coverage
  • 15+ wireless devices
  • Wi-Fi speeds up to 2.2 Gbps (5 GHz / 400 Mbps) plus (5 GHz / 867 Mbps) plus (2.4 GHz / 867 Mbps)
  • MU MIMO technology
  • It requires a reset once in a while

Linksys EA8300 Max-Stream is another Wi-Fi 6 router with one 2.4 GHz channel and two 5 GHz channels.

The strange bit about this router, as our WR networking team discovered, is that you need to log into the router over Wi-Fi to configure its access. However, once you get after this part, you will be good to go.

Thanks to its Beamforming technology and its large antennas, EA8300 manages to get pretty good coverage and signal strength.

This router is great for the whole family, streaming, and gaming because it will provide more than 15 steady connections.

Linksys Velop Pro – Best mesh system

  • 6 GHz Band Access & 5.4 Gbps speed
  • Up to 3,000 sq. ft. coverage
  • 200+ devices connection
  • 8K streaming & gaming
  • High price

Linksys’s Velop Pro is a mesh system that comes with Wi-Fi 6E connectivity. That means it also has a 6 GHz channel but before you buy it, check if any of your devices is compatible. Otherwise, the extra money for the tech will be wasted.

The advantage of this tri-band mesh system is that you can start with one device and add more and they will sync on a press of a button.

You won’t need to adjust any complicated settings because the routers will identify themselves and adjust their speed and bandwidth to your needs.

Another huge advantage is that with more routers in the mesh, you will be able to cover a huge area of over 3000 sq. feet and a lot more devices than with a single router.

Different types of routers

There are many types of routers to choose from so you should know about the main types and the differences between them:

  • Single-band routers – They are the oldest types and least effective because they only offer the 2.4 GHz band to connect. Also, they may interfere with some Bluetooth devices working on the same band. However, if you only have a few devices in your home and a low-speed connection from your ISP, they are acceptable. We have a list of the best 802.11ac routers that match that description.
  • Dual-band routers – The dual-band routers are the most widespread type, and they provide both the 2.4 GHz and the 5 GHz bands. Many of them can also be used as modems, to replace the one from your ISP. They are the best to use as access points in most homes. 
  • Tri-band routers – They either have an extra 5 GHz channel for more bandwidth (Wi-Fi 6) or feature the new Wi-Fi 6E technology with an extra 6 GHz band to connect the latest devices in your home (a total of three radio bands). Tri-band routers also offer more coverage area and Wi-Fi speeds of up to 9.6 Gbps. However, if you don’t have Wi-Fi 6 compatible devices, or you don’t have a high-speed connection from your ISP, it won’t be worth the investment.
  • Mesh Wi-Fi systems – The mesh systems are networks of more routers that can be used to cover larger areas. One device will act as the router and the others will automatically be set as access points to split the bandwidth in a convenient way to the connected devices. This solution is great if you have a lot of devices to connect (including IoT devices like sensors and automated gadgets) in a large area.
  • Wi-Fi 7 routers – It is estimated that next year, the new Wi-Fi 7 technology will be launched. It will cover the IEEE 802.11be set of protocols working on the 320 MHz band, together with the 4096-QAM, Multi-RU, and Multi-Link Operation, offering connection speeds of up to 46 Gbps. That is roughly 4.8 times faster than Wi-Fi 6 technology and 13 times faster than Wi-Fi 5.

Features to consider when choosing the best router for access point

  • Number of wireless devices – If you only have a laptop, a smart TV, and a smartphone, there is no point in getting the ultimate router for access point. A decent dual-band router will be a perfect choice in this case. However, if you have a large home (500+ sq feet) with 15+ devices to connect, consider tri-band Wi-Fi routers with Wi-Fi 6 or Wi-Fi 6E technology or even Wi-Fi mesh systems.
  • Range & coverage area – Most Wi-Fi routers have a top range of 100 feet (30m) but those are measured in optimal conditions. With most wireless routers, you won’t have a full Wi-Fi signal even after 30 feet, and if you have a brick wall between the devices, you will get a significant drop in the internet connection. A Wi-Fi router with an internal antenna won’t be as effective either.
  • Speed & bandwidth capacity – All ISP provide a plan guaranteeing a certain bandwidth and connection speed. Any Wi-Fi networks you set up, no matter their performance, won’t be able to exceed those numbers. For instance, if you have a guaranteed 1 Gbps from your ISP, there is no way you will get 9.6 Gbps wireless speeds even if you have the best Wi-Fi 6 router and a Wi-Fi 6 compatible laptop.
  • Wireless protocols & standards – Wi-Fi works under the 802.11 family of protocols.
ProtocolFrequency Band (GHz)Channel Bandwidth (MHz)Maximum Theoretical Data Rate (Mbit/s)
802.11b2.42011
802.11a52054
802.11g2.42054
802.11n2.4 and 520, 40600
802.11ac520, 40, 80, 80+80, 1606933.33
802.11ax2.4, 5, and 620, 40, 80, 80+80, 1609607.8
  • Ethernet ports and USB connectivity options – Besides the Wi-Fi connectivity, you must also consider connecting wired devices such as printers (to access the network), the PC, and USB devices like an external drive for storage on the network. So, make sure you have enough Ethernet ports for them as well as at least a USB port.
  • Parental controls & security measures – The latest routers have wireless access encryption systems for extra security. Some of them also feature dedicated settings for parental controls that allow you to apply dedicated rules for certain devices and limit the bandwidth or prevent access to certain apps or websites. Look for those features if you have kids and want to protect them while using the router features.

So, if you need a router for access point, consider the number of devices you need to connect, the area you need to cover with a Wi-Fi signal, and match the internet speed and band from your ISP, or upgrade your plan.

The WR networking team has tested the best Wi-Fi router for access point according to all possible needs and we hope that you have found the right one for you.

Which one did you choose? Tell us all about that in the comments section below.

Copilot in Excel: 4 ways you can use this AI assistant

It’s a great time to be a Microsoft lover and Windows user. After Copilot made its way to Windows 11, the AI assistant is coming to Microsoft 365, in November. And, according to the Microsoft 365 Roadmap, all the 365 apps, including, OneNote, Word, PowerPoint, Whiteboard, OneDrive, and Excel.

Yes, Copilot is coming to Excel, but unlike the other apps, Excel will only get Copilot in February 2024, according to the Roadmap. However, there will be a preview available for it in November.

But even so, Microsoft is already teasing out the AI capabilities coming to Excel, and needless to say, the assistant will greatly improve productivity and ease the workflow when working with data.

So what can you do with Copilot in Excel?

Copilot in Excel: 4 ways you can use the AI to greatly improve your productivity

  1. Copilot will help you understand your data better, and it can easily generate tables, and charts to give you new perspectives on them.
  2. The AI assistant will take a look at your Excel data, and it will generate insights for you to explore further. For example, Copilot can come up to you with various sums that can offer great insights on budgets.copilot in excel
  3. The AI assistant will also highlight important data, filter it, and organize it according to your requests. If you need to summarize tables and charts, Copilot can do it for you in seconds.
  4. And, probably one of the most important features is the ability to generate Excel formulas with Copilot. The AI assistant will come up with suggestions for complex calculations.

We’ll probably see more Copilot features coming to Excel in November when the preview is scheduled to take place. Even so, many of the features will aim to decrease the workload, and increase productivity, as we mentioned earlier.

It’s also good to note that Copilot across Microsoft 365 retains more or less the same features. The AI tool will be able to generate data, and summarize existing data.

What do you think about Copilot in Excel? Will you use it?

Can an Access Point Have the Same SSID as the Router?

Do you know that your router and access point can have the same SSID? Do you know there are also compelling reasons to do so and not to?

The key is to know why you want to do it, how to do it correctly, and the impact it will have on your network. In this post, we will review these questions and uncover more knowledge on this matter.

What happens if 2 routers have the same SSID?

If two routers have the same SSID, and both are broadcasting on the same frequency, then the available wireless devices will be able to connect to any of them if they have an open channel. However, only one of them can be connected at any given time.

The wireless devices will use whichever access point has the strongest signal. If they are close enough to both routers, they could switch back and forth between them. However, the SSID collision will likely result in poor performance and even dropped connections.

Can I set up an access point to have the same SSID as the router?

SSID cloning is possible and very common because it makes setup easier and more convenient for users. However, you should be aware of a few things:

1. The router must be broadcasting its SSID

This is a setting in the router, which you can find by logging in to the router’s admin page. If your router isn’t broadcasting its SSID, your computer will not be able to see and connect to the network.

2. The access point should be using the same wireless channel as the router

The main reason for this requirement is that most devices can only connect to one Wi-Fi network at a time. If you have multiple APs on different channels, your device will have trouble knowing which one it should be connected to.

This is important because you don’t want two devices broadcasting on the same frequency at the same time. If they aren’t using the same channel number, there could be interference between them that causes performance and channel conflict issues.

3. The access point must use the same security settings as the router

The wireless security setting on the access point must be identical to the wireless security setting on the router, preferably the WPA2.

If the wireless network uses any other security protocol, such as WEP,  it’s impossible to clone the SSID, and you’ll likely run into problems when trying to connect devices to the network.

What are the advantages of having the same SSID on both devices?

  • Streamlined connectivity – When you have the same SSID on your router and access point, you can connect to the devices in your home network effortlessly. This is because they will automatically detect the best network to connect to.
  • Easier management of network devices – You only need to manage one network instead of two separate networks with different SSIDs. This can make things easier if you have a large home or office network with multiple wireless devices.
  • Improved Wi-Fi range and coverage – With the same SSID, you don’t need to worry about interference from other networks with different names or security settings.
  • No need to update each device’s settings every time you change routers/access points – Access points can be replaced without having to reset all other devices connected to your home network.

What are the disadvantages of having the same SSID on both devices?

  • Security risks from unauthorized access points – Using the same SSID on both devices can make your network less secure by reducing its complexity. If you have the same SSID on your router and access point, anyone can create a rogue access point and give themselves free Internet access without your knowledge.
  • Interference between wireless networks with the same SSID – This can happen when two devices try to transmit simultaneously. This can cause data loss and even corruption of data packets.
  • Confusion when troubleshooting network issues – If you have a problem with your network and need to troubleshoot it, it’s harder to do this when only one SSID name is being broadcast.
  • Incompatibility with certain hardware/software – Some operating systems have problems with multiple routers using the same SSID. They may either refuse to connect altogether or automatically connect to one of them but not another.
  • Manual configuration – You’ll have to configure both devices manually using the same SSID, which could lead to confusion if something goes wrong.

How do I set up an access point with the same SSID as my router?

Step 1: Gather the necessary materials and information

  • Primary router – The primary router is the device that provides access to the internet for all of your devices. It also serves as the gateway for all local traffic. If you use a modem/router combo, you will only need one device.
  • Secondary Device (Access Point) – The secondary device is an additional access point that connects to the primary router and allows more devices to connect wirelessly.
  • Network cable – You may not need it if your router has a built-in Ethernet port.
  • The name of your router’s SSID – This is the network name or network ID and the password for your router.

Step 2: Configure your primary router settings

Log in to your router’s admin page using its IP address or hostname. You can find this information in its manual or in the network information page of its admin panel.

  • Network name (SSID) – This is the name that identifies your Wi-Fi network. You need to change it first before you can set up the AP.
  • Security type – Most routers support WPA2 or WPA encryption, but some older ones use WEP. Your access point needs to use the same security type as your primary router, so choose one of these two options and enter the correct passphrase when prompted during setup.

Step 3: Configure your secondary device (Access Point) settings

Once you have your secondary device plugged in, it’s time to configure it to work with your primary router. You will need to do this on each additional device you want to use as an access point.

The first thing is to change the IP addresses of both devices to Static IP Addresses. This enables the access point to connect directly to the primary router without other devices getting in the way. Once done, set up the name of the AP to be similar to the router, and you’re good to go.

In the end, if you have more than one access point in your network, it is possible to have them use the same SSID. However, having separate SSIDs can also be beneficial in a number of ways, and there are advantages to implementing multiple hubs.

As you weigh your options and their costs, take into account the time and effort of setting up and maintaining multiple access points. If you’re not careful, trying to connect your computers and devices in different locations around the house can become a nightmare.

Ultimately, you’ll have to decide which option best suits your personal needs. You might actually find out your prefer Wi-Fi mesh to access points.

Have you tried setting up your access point(s) with the same network name as your router? What has been your experience, and would you recommend it? Let us know in the comment section below.

How to Cancel an Xbox Game Pass Subscription on PC

Some users might find it more convenient to use their PC for account management, and therefore many are wondering how to cancel Xbox Game Pass on PC.

This is incredibly simple, especially if you’re away from your console and you want a break from gaming, so keep reading to find out how to cancel a subscription properly.

Is Xbox Game Pass Ultimate free with a new Windows 11 computer?

Yes, some PCs might get a free Xbox Game Pass for a month on a new PC. Keep in mind that this applies only to new subscribers and not existing ones.

How do I cancel Xbox Game Pass on my Windows 11 PC?

Use your browser

  1. Open your favorite browser and go to the Microsoft account page.
  2. Log in with your account that is associated with Game Pass.
  3. Click on Services & Subscriptions at the top.
     
  4. Next, locate your Game Pass and click on Manage.
  5. You should now see the cancellation option. Click on Cancel subscription.
  6. You will get offered to change your subscription plan. Click on Cancel subscription to confirm that you want to cancel the gaming service.

Does PC Game Pass charge monthly?

  • The basic PC Game Pass costs $9.99/mo.
  • The Ultimate subscription, which includes both PC and Xbox Game Pass costs $16.99/mo.

As you can see, it’s pretty simple to cancel Xbox Game Pass on PC. You just need to sign in to your Microsoft account and disable it from the subscriptions menu. To learn more about this feature, we have a special guide on Xbox Game Pass on Windows 11 that will answer all your questions.

If the subscription is too expensive for you, you might want to try getting an Xbox Game Pass Ultimate discount or you can invite friends for an Xbox Game Pass referral.

Did you manage to cancel your Xbox Game Pass on your PC using this method? Let us know in the comments section below.

Ask Bing AI is now Ask Copilot on Edge; Copilot is coming to the browser

The latest Dev Build was just released, and the package brings the new Copilot icon, which was introduced back in September, to the taskbar. Hint: it’s looking quite good. But it seems Microsoft is not stopping here with the AI assistant.

Spotted by Windows enthusiast, @Leopeva64, Microsoft is also replacing the Ask Bing AI option of Microsoft Edge with Ask Copilot, and it also updates it with the new icon.

The option to ask Copilot is now live in Edge Canary, and operatively speaking, it is no different from the Ask Bing AI option. Users will get the same results, however, the naming is different.

Is Microsoft ditching Bing AI in favor of Copilot in Edge? Who knows, but it seems Microsoft is taking serious steps to somehow replace Bing AI on Edge with Copilot.

Update: It seems Copilot will somehow replace Bing Chat in Microsoft Edge, as stated by Microsoft in their latest announcement about features coming to the browser.

Announcement: Icon change in Edge sidebar. In an upcoming update to Microsoft Edge, the Bing icon entry point in the Microsoft Edge sidebar will change to the new Copilot icon. No other changes in the experience are expected.

Microsoft

Ask Copilot: Microsoft is bringing Copilot to Edge

According to the same Windows enthusiast, Edge Canary also shows the updated Copilot icon when refreshing the Bing AI chat on Edge. It’s true, that it only appears in a matter of seconds, but coupled with the new Ask Copilot option, it would be evidence enough that Microsoft might be ditching Bing AI in favor of Copilot on Edge.ask copilot

And now, according to the latest announcements, Microsoft intends to replace the Bing Chat icon on Edge with the new Copilot icon. While we don’t know if the name is also going to be replaced, and Microsoft itself stated that no other changes in this experience will happen, in time, the Redmond-based tech giant might change the name of Bing Chat to Copilot.

The reason? Well, we would argue it’s uniformity. Microsoft is already known as a forefront force when speaking of AI, and the Redmond-based tech giant has been working, developing, and releasing AI-enhanced features all year.

For example, Copilot will not only come to Windows 11. The AI assistant will come to OneDrive, Microsoft Teams, OneNote, and all Microsoft 365 Apps. So, it might be a reason enough to keep encompassing all the AI features under one name.

However, there is Bing Chat Enterprise. And Bing Chat itself is still a very popular AI chatbox. So, these two AI entities would coexist, sure, but maybe, one day, they will become one. On Edge, it’s already happening.

What do you think about it?

How to Fix Ticketmaster’s U521 Error When Your Checkout Suddenly Fails

If you’re getting the Ticketmaster error code U521, it usually means the tickets you’re trying to buy are already gone or your session expired mid-checkout.

It’s frustrating, especially when you know you were quick. In this guide, I’ll break down exactly what the error means, why it shows up, and how to fix it fast.

How do I get rid of Ticketmaster Error Code U521?

1. Change your payment method

Make sure you use an accepted payment method. Ticketmaster typically accepts big names issued in the US. If your bank isn’t on the accepted list, you can also use PayPal.

Here’s a quick view of the accepted vs unaccepted Ticket master payment methods:

Accepted CardsUnaccepted Cards
PayPalBanamex Visa
VisaBanamex Mastercard
MasterCardBanamex Debito
DiscoverBanamex Debito Visa
American ExpressBanamex Debito Mastercard
Ticketmaster Gift CardSantander Visa
VenmoSantander Mastercard
Visa Emitida en Mexico
Mastercard Emitida en Mexico
Santander American Express
Ticketmaster accepted payment methods, courtesy of TicketMaster

2. Clear browser cache

  1. For this step, we shall be using the Chrome browser.
  2. Launch your Chrome browser and click the three vertical ellipses in the top right corner.
  3. Select Settings.Settings CHrome
  4. Click on Privacy and security, then select Clear browsing data.clear browsing data
  5. Check Cookies and other site data and Cached images and files, then hit Clear data.Clear data

3. Scan for malware

3.1 Browser scan

  1. Open your Chrome browser and click on the three vertical ellipses at the top right corner.
  2. Select Settings.chrome settings
  3. Next, click on Reset and cleanup, then select Cleanup computer on the right.reset and cleanup
  4. Hit the Find button next to Find harmful software.harmful software chrome
  5. Wait for the scan to finish and remove any recommended software.

Since not all browsers have a built-in malware scanner, ensure also a comprehensive system scan.

3.2 System scan

  1. Click on the Start Menu icon, search Windows Security, and click Open.open windows security
  2. Select Virus & threat protection.virus and threat protection
  3. Next, press Quick scan under Current threats.quick scan
  4. If you don’t find any threats, proceed to perform a full scan by clicking on Scan options just below Quick scan.Scan options
  5. Click on Full scan, then Scan now to perform a deep scan of your PC.Full Scan Scan Now
  6. Wait for the process to finish and restart your system.

For more powerful scans it is always best to use a dedicated security software, such as TotalAV HOME Security Essential. This tool provides you with real-time protection against most threats while navigating the web and it also comes with a powerful antivirus and in-depth scan that will allow you to quickly identify any issues within your system.

⇒ Get TotalAV

4. Disable your VPN

  1. Press the Windows key and select Settings.settings windows 11
  2. Next, select Network & internet and click on VPN in the right-side menu.select vpn
  3. Select the VPN connection you want to disable, click on the drop-down and select Remove.remove VPN

5. Disable your Proxy

  1. Press the Start Menu icon and select Settings.settings windows 11
  2. Click on Network & Internet on the left pane, then scroll down and click Proxy on the right pane.Network proxy settings
  3. Select Edit next to Use a proxy server option in the Manual proxy setup section, toggle off Use a proxy server and click on Save.Disable proxy server

6. Reset your browser

  1. Open your browser (in this case, Chrome) and click on the three vertical ellipses at the top right corner.
  2. Select Settings.chrome settings
  3. Next, click on Reset and cleanup, then select Restore settings to their original defaults.restore settings to their original defaults
  4. Confirm Reset settings in the next dialog box.

7. Reinstall the Ticketmaster app

If you have the Ticketmaster app on your phone, try reinstalling it to see if this fixes the issue. Otherwise, contact the Ticketmaster support team and see if they have any additional answers to your query. Be sure to provide a detailed account of the error for prompt assistance.

What are other tips for avoiding Ticketmaster errors?

  • Try to purchase tickets within a specific time range – There’s no better time than the present. Instead of waiting for last-minute ticket scrambling, book tickets early enough before the site is bombarded with too much traffic.
  • Ensure you’re buying tickets from a legitimate online platform – There are a lot of sites masquerading as the real thing, so always double-check the URL to ensure you’re not being catfished.
  • Double-check payment method before submitting transaction – Before checkout, check whether you have sufficient funds to make the purchase and your credentials match your debit/credit card.
  • Disable third-party extensions – Extensions, especially adblockers, prevent sites like Ticketmaster from loading properly and may keep popping up the Pardon for the interruption error message.

If you’re also encountering error code U533, you can learn how to fix error code U533 on Ticketmaster in our dedicated guide.

Other payment-related issues on Ticketmaster include the error code 5005 and error code 0011, which can also be fixed in a similar manner.

Another common issue is Ticketmaster error code 0002, but we have covered it in our latest guide, so don’t miss it.

And if you’re dealing with other Ticketmaster issues, like not receiving your verification code or repeatedly running into the same error, check out our guides on Ticketmaster not sending code and how to fix Ticketmaster error code U521.

There you go. Now, you should be able to eliminate error code U521 quickly. Do you have any other tips? Share them with us in the comments section below.