A lot of users decide to combine Popcorn Time with the VPN solution, both for the sake of privacy protection and avoidance of geo-restrictions.
However, occasionally those two are not on the best of terms, and Popcorn Time just won’t work with the VPN enabled. The reasons may vary, as we’ve seen so many times.
In order to address this, we provided the list of possible solutions below. If you’re having a hard time running VPN and Popcorn Time together, make sure to check them out and give us your feedback.
Why is Popcorn Time not working on VPN?
As you may expect, there are different scenarios that can happen regarding this issue. First of all, it can be due to your unstable Internet connection.
It can be determined by other possibilities that cause your VPN not to work with this platform. For instance, you can be banned from using a VPN connection for Popcorn Time access in other regions.
Other factors can be server downtimes or overload, defective VPN configuration, lack of P2P functionality, or regulations that prohibits Popcorn Time usage.
In addition, you should be informed about other causes reported by the users about this problem:
Popcorn Time VPN warning won’t go away
Popcorn Time connection not secure
Popcorn Time no connection
Popcorn Time keeps asking for VPN
Popcorn Time not working with VPN
How can I fix VPN issues with Popcorn Time?
1. Make sure your VPN supports P2P streaming
Now, as you’re well aware, there are so many VPN solutions nowadays, both free and premium versions. Even though they’re functioning on the same premises, it doesn’t mean that all of them provide the same services.
On the contrary, some services, like in this case relevant P2P streaming and torrenting, are not available in every VPN client.
This means that, without the proper support, you won’t be able to use both VPN and Popcorn Time to stream movies or TV shows. So, before we move to additional troubleshooting steps, make sure to check your VPN and confirm that it indeed supports this feature.
Install Popcorn Time app and start watching content with VPN.
While we’re there, we can gladly suggest ExpressVPN as the preferred weapon of choice. It’s reliable and it comes with unlimited bandwidth speeds and a simplistic UI.
And did we mention Lightway protocols? If you’re willing to give it a test drive, know that you have enhanced speeds completely risk-free thanks to a 30-day money-back guarantee.
More so, it is also optimized for P2P streaming and provides steady, reliable connections to multiple gateways strategically placed across 94 countries worldwide.
That means it allows you to unblock any website, or content and bypass all sorts of restrictions including geo-targeting or national copyright infringements.
Ultra-fast download speeds, buffering-free access to over 3,000 servers, best-in-class encryption for your traffic.
ExpressVPN
Watch your personalized content on Popcorn Time at highest quality with this VPN shield for streaming.
The first obvious thing you can do is to open your VPN desktop client and try a different location or server.
Some countries or ISPs block Popcorn Time streaming so there’s that and not all servers support P2P sharing.
Also, even though the chances are gradually smaller, the Popcorn Time client itself might object to certain locations.
Don’t forget that some servers are frequently overcrowded, which might slow the performance or even block it.
For that purpose, we advise you to just free roam through the available servers and find the one which works for you. If even that isn’t sufficient for the issue resolution and the two just won’t work together, make sure to follow the additional steps.
3. Restart Popcorn Time and VPN
Close both the VPN and Popcorn Time API client.
Open Popcorn Time without the VPN being active.
Select the media file you want to play and, just before the streaming, enable VPN.
Voila, that should do it.
Some troubled users managed to resolve the issue at hand by simply changing the start sequence of the two opposed applications.
Most of the users will start or have a VPN working in the background before they open the Popcorn Time client. For some peculiar reason, this causes issues with the streaming service.
So, basically, you’ll need to do the following:
4. Disable third-party firewall
Problems are not always to be found in troubled conflicting applications. Namely, the same issue might occur due to blockage imposed by the third-party antivirus.
Most of the antivirus solutions come in security suits, accompanying various tools including the third-party firewall. And those tend to prevent Popcorn Time from accessing P2P sharing sites from where they acquire the shared media.
Speaking of firewalls, if you are looking for a better alternative, do give these firewall devices a try and protect your entire home network with just one tool.
So, what you’ll need to do is to either whitelist Popcorn Time or disable the third-party firewall or antivirus and move from there. If you’ve done it already and the problem is still persistent, make sure to continue through the list.
Finally, if none of the previous solutions worked for you, we can only advise reinstalling Popcorn Time as the last resort.
The core of the issue might be in the outdated application version, so it’s preferred to acquire the latest available version.
The procedure doesn’t differ from any other application, so it shouldn’t take too much time to locate and install the media streaming client on your PC and install it accordingly.
That should do it. In case you have questions or alternative solutions, be so kind as to share them with us in the comments section below. We look forward to hearing from you.
It’s widely agreed that port forwarding is sometimes a feature that you need in a VPN.
However, as we’ve already established, port forwarding can often be hazardous, especially if mishandled.
Usually, you’d want as few open ports on your PC as possible. An open port is like an open door to a hacker, who might see it as an opportunity to exploit any known vulnerabilities of services/programs running on it.
If you’re in the latter category, and you’d rather prefer that your VPN lacks port forwarding support, you might want to stick around.
What is port forwarding?
Port forwarding is a useful feature that may unlock additional capabilities for you, network- and connectivity-wise.
Picture this: it’s a weekend afternoon, and you and the crew want to play a game, but one of you must be the host.
More often than not, you won’t be able to make the server public without port forwarding.
This goes double for those annoying situations where you’re behind a double NAT and not even port forwarding seems to be working.
Anyway, to put it simply, port forwarding lets you access resources on your home network remotely.
That’s why many may see it as a boogeyman and want nothing to do with it.
Ergo, the need of creating a compilation of top VPN services without port forwarding is totally justified.
Does VPN require port forwarding?
Your VPN doesn’t need a port forwarding process for connecting to other server addresses. If only you have a NAT Firewall on your router, then you can use port forwarding VPN tools.
In case you don’t need to share your connection and make it public for specific activities like gaming, then a VPN will work fine without it.
Otherwise, if you wish to access your network remotely and use the NAT (Network Address Translation) for group tasks, you can get VPN software that includes the port forwarding feature.
ExpressVPN provides complete anonymity when networking because of its strong security and data protection requirements. Plus, it has lack of records for IPs, browsing history, metadata, and DNS queries.
Because ExpressVPN does not provide port forwarding, its services are immune to this risk, therefore no danger of data leaks.
By using the service, you get a privacy advocate who is dedicated not just to offering a private VPN service to enable individuals all over the world to be more anonymous, but also to promoting the cause of privacy itself.
ExpressVPN may be used on an infinite number of devices, but only on 5 devices simultaneously.
You will get the latest encoding security with AES-256-bit and limitless bandwidth to enjoy full downloads in no time, with the ISP throttling being evaded.
ExpressVPN’s key features include:
High privacy advocate standards
256-AES encoding
Lightway self-protocol for fast and secure streaming
NordVPN needs no introduction, as it’s one of the most popular (and competent, for that matter) VPN services on the market.
This service is made available by Tefincom & Co., S.A., and packs a wide range of security options.
First and foremost, it’s worth mentioning that this is one of the VPNs that lack port forwarding features.
Of course, it lacks this feature for security and server management considerations.
Given that multiple users connect to the same servers, port forwarding would be a bit difficult to achieve.
However, according to their support page, NordVPN may consider implementing port forwarding in the future, but there’s no ETA.
So, to put it shortly, NordVPN blocks all ports on your PC, except for the ones that are essential for VPN and regular Internet usage (including popular apps on your PC).
NordVPN’s list of features:
Strict no-logging policies enforced
Military-grade 256 AES encryption
NordLynx, OpenVPN, and IKEv2/IPsec protocols supported
Surfshark is a solid VPN service offered by its namesake company, Surfshark LTD.
Since it made this list, you can rest assured that it has no port forwarding support, therefore it’s not possible to enable it by accident.
Surfshark stands by its decision to not implement this feature, arguing that opening ports mean exposing your system to potential threats.
According to a blog post on, you guessed, port forwarding, a vulnerability discovered in 2015, called Port Fail, leaked VPN users’ IP addresses online as a side effect of using port forwarding on VPN.
Since one of the most important purposes of a VPN is to keep your IP address private, Surfshark does make a strong point in refusing to implement port forwarding.
Plus, the whitelist feature lets certain websites and apps bypass VPN traffic. Hence, you won’t be recognized as using a VPN connection
Check out Surfshark’s feature list:
CleanWeb (no ads, trackers, malware, phishing)
Use it on an unlimited number of devices on the same account
Strict no-logging policy
Comes with private DNS on each server
Camouflage Mode (obfuscated VPN traffic to decrease detection chance)
MultiHop (connect through multiple countries)
AES-256-GCM encryption
More than 1,700 servers in 63 countries
IKEv2/IPsec protocol used by default
Surfshark
If you need a VPN that has no port forwarding support, one of your safest bets might be Surfshark.
CyberGhost VPN is a great VPN service brought to you by Kape Technologies.
As you’d expect, it doesn’t have any port forwarding capabilities from security considerations.
According to CyberGhost’s knowledgebase, if this service would’ve had port forwarding, users would be easy to identify based on port assignment.
However, this may also have some shortcomings.
Port forwarding means that all incoming connections are blocked, so you may notice extremely slow download speed values.
But hey, at least you’re totally secure, right?
Pro Tip: If you truly want to run a tight ship, make sure you don’t miss CyberGhost VPN’s random port option. You can find it in the Settings menu of the app, under Connection, it’s called Use a random port to connect.
CyberGhost VPN’s main features:
Lets you use a random port with each connection
Uses 256-bit military-grade encryption
Has several secure protocols to ensure top-notch protection
Runs on a zero-logging policy
More than 7,000 servers in over 90 countries
CyberGhost VPN
Looking for a VPN without port forwarding support? CyberGhost VPN might be exactly what you need.
VyprVPN is Golden Frog GmbH’s trustworthy VPN service. As you’d expect, it doesn’t support port forwarding, so there’s nothing for you to worry about, port-exploitation-wise.
VyprVPN does offer you the option to assign the OpenVPN port manually. However, if you’re not so sure about port forwarding, we’d suggest you stick to this VPN’s default settings and not mess with the port settings too much.
Unless there’s an issue.
Currently, VyprVPN’s OpenVPN and Chameleon protocols only support UDP ports.
On the other hand, according to a VyprVPN knowledgebase article, TCP will also become available at some point, so as to provide the user base with a broader range of ports.
Here’s VyprVPN’s list of main features:
The chameleon protocol helps decrease VPN traffic detection rate
Offers DNS protection and doesn’t log any DNS requests
Automatic VPN connection whenever an unknown WiFi network detected
Kill switch to block Internet traffic when VPN is inactive
Up to 5 simultaneous connections
Zero-logging policy
Over 700 VPN servers that accommodate more than 200,000 IP addresses
VyprVPN
Need a VPN that says no to port forwarding? It might be just the tool you’re looking for.
ZenMate VPN is yet another excellent VPN service from Kape Technologies that lacks port forwarding capabilities.
But that’s a good thing since it means more security for you, the end-user.
Sure, you may not be able to host game servers for your friends while using ZenMate VPN, and your torrenting/P2P activities can get a bit slow from time to time.
But at least you won’t lose any sleep wondering whether you closed that port after you were done with it.
You can operate ZenMate VPN as easily as you would any other VPN service.
You just select a server and your whole traffic will be encrypted and routed through the VPN’s secure tunnel.
Check out ZenMate VPN’s features:
Comes with an awesome, generous 7-day trial
Enforces a strict zero-logging policy
Comes with apps for a wide range of devices
Lets you install it on an unlimited number of devices
Strong military-grade encryption
Over 3,500 servers in more than 74 countries
ZenMate VPN
Do port-forwarding VPNs make you worry? Check out this efficient VPN.
Whether you feel that port forwarding is a useless feature for a VPN or are a bit worried you might get compromised because of it, there are several VPN services that don’t allow you to forward ports. Mostly due to security concerns.
For additional guidance, you have our best VPNs for Windows 10 to keep your privacy and security at optimal levels. You can also visit the VPN Hub to discover more tools and awesome guides on keeping your digital presence safe.
However, know that sometimes, as dangerous as it may be if not done right, forwarding ports can be a necessary evil.
Windows 7 still has a big user count even though Microsoft no longer supports it. Although it’s an older platform, you can still install printer drivers in Windows 7 much the same as in Windows 10.
Although you can’t install a new printer driver with Settings in Windows 7, that platform still includes the Control Panel.
How can I install a printer driver in Windows 7?
Users need to both install drivers for new printers and update them for old ones. These are the various ways you can install drivers for newly purchased printers and install the latest drivers for printers within Windows 7.
If you want to check if there are newer drivers to install for your printer, run a driver updater software scan. A driver updater scan will show you what devices on your PC have outdated drivers. Then you can download and install the latest driver for your printer with the driver updater utility.
Using such specialized software is the best method to manage your missing drivers or just update the old ones from the official producers’ sources.
More so, you should take advantage of the following tool if you need the maximum capacity of your hardware components, including your printer device.
2. Take advantage of the Add Printer wizard
Click the Windows 7 Start button.
Enter Control Panel within the search box on Windows 7’s Start menu.
Then click on the app to open it.
Select Large icons on the View by menu.
Next, click Devices and Printers to open the applet shown directly below.
Press the Add a printer option to open the window in the screenshot directly below.
Select the Add a printer option if you don’t have a USB printer.
For a wireless or Bluetooth printer, select the Add a network, wireless, or Bluetooth printer option. Note that your Bluetooth or wireless printer will need to be turned on when you select that option.
If you selected the first option, you’ll need to select the Use existing port setting and choose an appropriate port on the drop-down menu. Then click the Next button.
Thereafter, select your printer’s manufacturer and a driver to install for it on the right of the window.
Press the Next button to proceed to the last step of the wizard.
Enter a name for your printer in the text box.
Click Next to install the drivers.
Thereafter, you can skip over optional printer sharing settings; and click the Finish button.
Most of the printers released over the last three years or so are probably USB ones. Drivers for USB printers get automatically installed when users plug the printers into PCs.
The method above is more applicable for installing drivers for older printers or wireless ones.
3. Install printer drivers in Windows 7 with Device Manager
A classic and easy method to download and install a printer driver on your Windows 7 device is via Device Manager. All you need to do is locate your printer in the devices list and configure Windows to automatically search a driver for it.
1. Open Run with the Windows + R hotkey.
2. Type this command into Run: devmgmt.msc
3. Click OK to open Device Manager.
4. Double-click the Printers category.
5. Right-click your listed printer and select theUpdate driveroption.
6. Select the Search automatically for drivers option in the window shown directly below.
7. Windows will then download and install a new driver for your printer.
4. Download printer drivers from manufacturer websites
You might find there is a newer driver available for your printer on the printer manufacturer’s website. To check, open your printer manufacturer’s website in a browser.
Open the driver download section of the printer manufacturer’s website.
Enter your printer’s model within the search box on the website, and click the Search button.
Then browse through the list of driver downloads for your printer, and select to download the latest compatible driver for it.
Thereafter, open the folder you downloaded the printer driver to.
Click the installer.exe file for your downloaded printer driver to install it.
NOTE
Your printer driver might download it as a ZIP archive. If so, you’ll need to extract the ZIP archive first. Then open the extracted folder for your printer driver, and click the setup file from there.
5. Install Windows 7 drivers with a DVD that came with the printer
DVDs are in obsolescence, and most USB printers probably don’t come with driver discs these days. If your printer does happen to have a driver installation DVD, however, insert that disc into your PC’s CD/DVD drive.
When you insert it, an installation wizard will probably then automatically open. So, there are a few different ways you can install PC drivers in Windows 7.
For driver update purposes, you can utilize driver updater software and Device Manager or manually download and install new ones. Let us know your choice in the comments area below.
You might not have thought it possible at first, but the Steam Deck can connect to an external monitor quite easily.
In fact, the Steam Deck functions exactly as your PC does, only it runs on a different operating system. But don’t let that stop you, as we can show you how to dual boot Windows 10 or 11 on it as well.
Now, however, let’s have a look at how to hook the Steam Deck up to another monitor, in case you want to see the bigger picture (pun intended).
Does the Steam Deck have an HDMI port?
Since we’re talking about hooking the Steam Deck to other monitors, know that the Steam Deck doesn’t have an HDMI port.
That being said, it does have a USB-C port though, which means you can connect it to your TV or PC with the help of either a USB-C to HDMI adapter or a USB-C dock that includes an HDMI port.
We’re going to take a look at the Steam Deck external monitor settings and find out all there is about connecting the two devices.
Can the Steam Deck output 4K?
We were sure this question was on your mind, so know that you can plug any HDMI to USB-C adapter into this and it can output at 4K.
In fact, the Steam Deck gaming device supports both HDMI and DisplayPort, meaning you can more or less plug your Deck into almost any television or monitor you wish.
So, now you know that the docked handheld gaming PC (Steam Deck) will be able to output at 4K, which is an unexpected bonus.
How many FPS can Steam Deck do?
Well, now that Steam Deck supports a 40Hz refresh rate, users can enjoy the perfect middle-ground between 30 and 60 FPS.
There is also a limiter, which allows you to limit the frame rate to 45 fps, 22 fps, and so on, depending on your preferences.
Limiting your frame rate can help you fix unstable frame rates and screen tearing issues, plus save some wear and tear on your Deck’s GPU if it’s in danger of overheating on a particular game.
You are also probably wondering about Steam Deck’s external monitor FPS, or the Steam Seck gaming mode performance on an external monitor, so let’s take a close look.
How do I connect my Steam Deck to an external monitor?
1. With a USB-C cable
As we mentioned above, Valve’s Steam Deck gaming device will come with a USB port, which will make things a lot easier.
Just as we said at the beginning of this article, you can plug any HDMI to USB-C adapter into your Steam Deck and it can output at 4K.
Some TVs or monitors, however, don’t have a USB port and will require an HDMI connection in order to use it with Steam Deck.
That’s why it will be really handy if you had an adapter, which will facilitate this process and you can go back to gaming.
So, simply connect your Steam Deck and monitor/TV through the USB cable/adapter, and you are set and ready to go.
2. With a Steam Deck dock
Another method you can use to establish a connection Between the Steam Deck and the desired monitor/TV is to use a dock.
You can find these devices online, for different prices, but keep in mind that these are not official Valve products, and although compatible, in some cases, can harm your device.
Purchase one, unpack it, position the Steam Dock in the intended position, connect the USB cable, and you are set.
Does Steam Deck have a docking station?
Valve is also working on an official Steam Deck dock, but due to parts shortages and COVID closures at our manufacturing facilities, the official Steam Deck Docking Station is delayed.
The company also stated that, while we wait, the team is continuing to work on improving the docked experience for Steam Deck with all USB-C hubs and external displays.
Steam Deck external monitor not working
On your Steam Deck, open Settings.
Open Display Configuration.
Make sure your monitor is selected, and that the setting is Enabled.
In order to avoid these situations, make sure that the TV or monitor you are trying to hook your handheld gaming rig to are compatible.
If compatibility isn’t an issue, but the monitor refuses to come out of sleep mode, or even turn on, alter the settings we’ve shown you above.
That is pretty much all the information you need regarding the Steam Deck’s external monitor resolution or instructions on how to make it happen.
Steam Deck’s external monitor connection resolution can be up to 1080p, and even 4K steam, so keep that in mind when talking about the Steam Decks external monitor performance.
Has this guide been helpful to you? Share your experience with us in the comments section located right below.
Some of us are more accustomed to working on Linux, some on Mac, while the wide majority prefer Microsoft’s Windows OS.
Even though the Steam Deck comes with its own Steam OS, some users might feel that installing Windows would be more appropriate for their needs.
Today, we’re going to show you how to dual-boot Windows 10 or Windows 11 on our Steam Deck, just in case you decide to do so. When it comes to Valve’s new gaming rig, we can also provide information on how to change Steam Deck’s resolution, or what are the best Steam Deck verified games.
How do I dual boot Windows on Steam Deck?
1. Dual boot Windows 10 on Steam Deck
In order to install Windows 10 on your Steam Deck, you need an USB flash drive or an SD card containing the installation media, as well as the third-party Rufus app.
You can download the installation media for Windows 10 using your PC from the Microsoft official website. This ensures a safe and clean installation.
Yes, as you can see above, you can install Microsoft’s latest operating system on your brand-new Steam Deck if you don’t like the default OS.
In fact, we’ve shown you how to install Windows on Steam Deck. After a lot of time spent on the Trusted Compatibility Module (TPM) and with AMD to ensure Windows 11 compatibility, Valve is confident it has built a flawlessly Windows 11-compatible system.
Remember that to install Windows 11 on your Steam Deck, you must download the OS and put it on a USB flash drive.
What OS does Steam Deck use?
Valve’s new device, the Steam Deck runs on a modified Arch Linux operating system called SteamOS v3.3.
The SteamOS had been initially developed for Steam devices using Debian Linux, but Valve stated that they wanted to use a rolling upgrade approach for the Deck’s system software.
That said, remember that you can also install Windows on Steam Deck, as we will show you in today’s guide.
Can the Steam Deck emulate?
It should come as no surprise that Steam Deck can emulate many consoles, arcade machines, and even MS-DOS games.
Also worth mentioning is the fact that plenty of legal emulators are available to install and play your game backups.
Now, however, let’s examine how to perform this Windows on Steam Deck boot directly from your device’s USB.
How do I boot from USB to Steam Deck?
As we said, you can easily boot directly from a USB stick to your brand new Steam Deck device by following the following steps.
First, make sure that the Steam Deck is powered off, then hold the Volume down button and press the Power button.
You should only continue to hold the volume down button until the Steam Deck boot screen appears, at which point you will launch Steam’s Boot Manager.
From there, the system will do the rest of the work, provided you created the image or media you want to boot from it well.
So, the next time you want to use the Steam Deck to dual-boot Windows 10 or Windows 11, this guide contains all the information you need.
Remember to use Steam Deck to dual-boot Windows from an SD card or your trusty USB stick. Keep in mind that you’ll need appropriate drivers for Windows, and we have a great guide on how to download the Windows 11 Bluetooth driver for Steam Deck, so don’t miss it.
There you have it, folks. You need only know how to install Windows on your new handheld Steam Deck gaming rig.
The Windows 11 remote desktop greyed out is one of the problems users complain about with the Remote Desktop. It means no matter how much you tap, Remote Desktop won’t respond because the buttons are inactive or frozen.
The Windows 11 remote desktop can be greyed-out for several reasons. The causes may range between hardware issues, Windows issues, and lots more.
Nevertheless, we offer solutions that users can employ to fix the Allow remote connections to this computer greyed out Windows 10 problem. Hence, this article will discuss the causes and solutions for the issue.
Why is Enable Remote Desktop greyed out?
The Allow remote connections to this computer is disabled: Before using the Remote Desktop software on a Windows computer, you must ensure that the Allow remote connections to this computer are enabled. It gives the computer permission to establish a connection with a server. Hence, the Windows 11 remote desktop greyed-out issue occurs because the button is not active. Also, learn how to fix the Remote Desktop connection issues.
Outdated Windows: Many users are not conversant with the extent of damage outdated Windows can cause to their computers. It prevents the computer from accessing necessary patches and updates to help it run its programs smoothly. Likewise, it can affect some drivers and programs that are dependent on it. So, it is impossible to neglect the possibility that an outdated Windows can affect the performance of your PC.
Interference from Windows Defender Firewall: Windows Defender Firewall is an inbuilt shield for Windows. It can affect the activities of the Remote Desktop. The firewall may misinterpret the actions of the remote desktop as dangerous, which is why it can block access to the software. Hence, it can prompt the Windows remote desktop settings greyed out issue.
What can I do if the remote desktop is greyed out in Windows 11?
1. Update Windows
Click on the Start button.
Select the Settings option.
Click on Windows Update and select Check for updates.
Windows will automatically search and download updates if there are any available. Updating Windows will help fix any software or driver update issues affecting your computer.
2. Make sure Remote Desktop is enabled
Click Start on the taskbarand select the Settings app.
Go to the System tab and click the Remote Desktop option.
Toggle On the Remote Desktop option.
Click Confirm on the dialog box to save the changes on your computer.
4. Enable Remote Desktop from the Local Group Policy Editor
Press the Windows + Rkeys to open the Run window.
Type in gpedit.msc, then press Enter to open the Local Group Policy Editor.
Go to the Computer configuration, then select the Administrative Templates.
Click on the Windows Components option, then Remote Desktop Services.
Select the Remote Desktop Session Host option, then click on Connections.
Then double-click the Allow users to connect remotely using the Remote Desktop Services option.
On the left pane of the screen, click on Enable and OK.
Restart the computer to sync the settings. This solution is best for the Remote desktop greyed out some settings are managed by your organization problem.
5. Select the private network profile
Press Windows + Ikeys to open Settings.
Click the Network & Internet tab and select Ethernet orWi-Fi(depending on your connection type).
Click on the Private option button.
The Private network profile helps make your device discoverable on the network.
Can I use RDP on Windows 11 Home?
Windows 11 home allows you to use the Remote Desktop connection to access another computer in a different environment. So, you can use RDP on Windows 11 Home.
These are the best solutions to fix the Windows 11 remote desktop greyed-out problem. Ensure to follow the steps provided holistically for optimal results.
GIMP 2.10 is among the best freeware image-editing applications for Windows. It includes an abundance of image-editing utilities.
Users have been looking for ways to mirror images in this tool. Follow the steps below to find out how to mirror a transparent image in GIMP.
How can I mirror an image in GIMP?
You can add a mirror reflection effect to an image object by utilizing GIMP’s Flip Tool with duplicate layers of the same picture. All you’ll need is an image of an object with a transparent background.
The Flip Tool is one of GIMP’s handy utilities that enables you to turn a picture upside down vertically or left or right horizontally.
1. If you don’t already have GIMP, click the Download 2.10.22 button on the image editor’s download webpage, and then install the app with the setup wizard.
2. Open the GIMP 2.10 image editor.
3. Next, click theFilemenu and selectOpen.
4. Select an image with a transparent background to flip and click theOK button to open the image.
5. Click theImagemenu.
6. Select Canvas sizeto open the window shown directly below. Expand the width and height of the image’s canvas by increasing the values in the Width and Height boxes
You’ll need to expand the canvas so that you can fit a duplicate image within it.
7. Press theResizebutton.
8. Right-click the image object within your canvas and select theLayersubmenu.
9. Choose theDuplicate layeroption and click the Move Tool button if it’s not already selected.
10. Then hover the cursor over the selected image object layer and hold the left mouse button to drag it down the canvas. Position the image object just beneath the top object as shown directly below.
11. Click the Flip Tool button in the snapshot directly below.
12. Select theVerticalradio button, then left-click the duplicate image object layer on the bottom half of the canvas to flip it as in the snapshot below.
13. If you need to, click theMove Toolagain so that you can better align the mirrored image along the bottom of the one in the top half of the canvas.
14. You can add some optional opacity to the flipped image reflection by selecting its layer on the right of the window and reducing theOpacityvalue to something like 50. Then the flipped reflection will be faded.
Note: To add a horizontal mirror image, you’ll need to drag the duplicate layer directly to the left or right side of the object it’s mirroring. Then select theHorizontaloption on the Flip sidebar.
15. Click theFilemenu at the top left of GIMP’s window.
16. Select the Export asoption to open the window shown directly below.
17. Click theSelect File Typebox and choosePNG imageon the menu.
18. Enter a title for the image file and choose a folder to save the picture to.
19. ClickExport, andExportagain, to confirm.
20. Thereafter, open your finished mirror image in Photos or Paint.
If you open it in Paint, you can fill out the background with its Fill with color option. Your final mirrored image will have the same effect as the one directly below.
So, that’s how you can apply a groovy mirror reflection to transparent image objects with GIMP.
Our GIMP guide provides details on how you can add transparent backgrounds to image objects and apply other effects with that software.
We hope our guide helped you mirror an image in GIMP. Let us know in the comments section below if you encountered any difficulties along the way or whether you have any questions.
Slack is one of the foremost instant-messaging platforms that’s one of the best alternatives to Skype. A lot of users prefer to utilize Slack due to its superior text formatting and app integration options.
Slack also enables you to set up handy reminders for yourself, a whole channel, or a channel member. Follow the guidelines below to create and delete reminders in Slack.
How can I create and delete a Slack reminder?
1. Create Slack Reminders
To set up a reminder, select your (you) direct message space on the left of the Slack window.
Input this command into Slack: /remind Then you’ll see the remind command template shown directly below.
To set up a reminder more specifically for yourself, you’ll need to expand the command to: /remind me
Then add the [what] part of the command. For example, if the reminder was to send a letter, the command would be the following: /remind me to send the letter
The end of the remind command needs to include a time in at least the form of a date. For example, the command could be something like: /remind me to send the letter on 2/3/2020
Press the Return key after entering the full command. Thereafter, Slackbot will say that it will provide the reminder on the specified date at a default 9 A.M time if you didn’t enter a specific clock time.
If you need to set up a reminder for another Slack member, enter the command as follows: /remind @member Replace member in that command with the required name, and then add the [what] and [when] parts to the reminder.
To set up a reminder for a whole Slack channel, enter the command like this: /remind #channel Replace channel with the actual channel name, and then expand the reminder as required.
If you need a weekly recurring reminder, enter the command something like this: /remind me to check emails every Tuesday So, enter every before the specified time to instruct Slackbot to remind you on a daily, weekly, or monthly basis.
After you create some reminders, you might change your mind and want to remove one or more. In order to delete a Slack reminder, you need to expand the reminders list and manually remove the unwanted one.
1. Launch Slack.
2. Type the following in Slack’s text box as shown directly below and press Enter: / remind list
3. Thereafter, Slack will show you an upcoming reminder list as in the snapshot below.
4. Navigate to the Slack reminder you want to delete.
5. ClickDelete on it to erase it.
This is all you need to do. If you accidentally click Delete on the wrong reminder, you will have to create it again, as there is no confirmation prompt upon deleting reminders.
Note that Slack doesn’t provide an edit option for reminders. Thus, you’ll need to delete reminders and re-enter the full commands again to change them if needed.
So, setting up and deleting reminders in Slack is straightforward, but did you know that you can also create polls in Slack or send GIFs? It’s just as easy!
If you need any additional info or you just have some questions, don’t hesitate to reach for the comments section below.
In Office 365, admins can create an archiving and deletion policy that automatically moves items to a user’s archive mailbox or deletes items after they reach a certain age limit. This means creating a retention policy that’s assigned to mailboxes.
Are you looking for a way to apply a Retention Policy to Shared Mailbox? Let us guide you on how to perform the procedure.
Why should I set a Retention Policy in Office 365?
You might have tried to attach a personal retention tag to a shared mailbox that deletes all emails older than 30 days, let’s say.
The default 1-month delete tag from the O365 web portal doesn’t seem to function. It just states instead No retention policies have been applied to this mailbox. Parameter name: Mailbox.
That’s a clear sign that you’re supposed to apply this policy as quickly as possible. Read on to find out how to do it.
How can I apply the Retention Policy to Shared Mailbox?
The procedure of setting the Shared Mailbox Retention Policy basically involves applying the retention tag to a shared mailbox, along with setting retention URL, hold duration, etc., for shared mailboxes in bulk.
A retention tag applies retention settings to individual messages and folders in the user’s mailbox. The tag defines how long a message remains in the mailbox and what happens when the message reaches the specified retention age.
It’s up to you – do you want it moved to the user’s archive mailbox or simply deleted? Make up your mind about that and then you’re ready to apply the Retention Policy to Shared Mailbox.
1. First, make sure you’ve signed into your Windows device with your user ID. That’s the one associated with your Office 365 license.
2. Open your preferred browser.
3. Navigate to the Office 365 web page. If you use Edge, you can see the tab for Office 365 as soon as you launch it. Click on it.
4. SelectManagementfrom the left navigation section.
5. Up next, click onMailbox Management.
6. Now selectShared Mailbox Retention Policy.
7. Choose theO365 tenantto which you want to apply the settings.
8. Give all necessary inputs.
9. ClickEnter name(s)to search for the desired objects.
10. You may also import details from a CSV file. For that, clickDownload Sample CSVto view the format, before import.
11. Now, select the objects for which you wish to apply this configuration.
14. Finally, you can view the status of the operation.
15. The retention policy usually takes effect after seven days by default. To verify that the new retention policy was indeed assigned to mailboxes, select a mailbox on theMailboxes page, and then clickEdit.
Then, on themailbox properties pagefor the selected user, click onMailbox features. The name of the new policy assigned to the mailbox should be now displayed in theRetention policy drop-down list.
Steam is an excellent platform for gaming, popular among worldwide users. However, many people reported that sometimes Steam game launches, but nothing happens when clicking Play.
This can be a big problem since you won’t be able to launch any games at all, but today we’re going to show you how to fix this issue.
You can encounter many Steam issues, and several users reported that they could not run games on Steam.
Similarly, users also mentioned that sometimes Steam launches the game, but nothing happens,or the Steam game displays a Running message, then stops.
So, check out the solutions below if nothing happens when you want to play games on Steam.
Why can’t I play my Steam games?
You need to be aware of the most popular reasons why today’s error might occur. Take a look at the list below and discover them:
Your antivirus software is blocking the game access: This will happen in case you have an over-protective program. If this is the cause, you’ll probably need to disable it temporarily.
Incorrect privileges: To get a smooth and complete experience on Steam, you should always ensure that you run the app with administrator privileges.
Wrong download region: Because today’s issue might be related to some networking problems, it would probably be a good idea to change Steam’s Download Region.
Missing or corrupted files of the game: If this is your case, you should verify the integrity of your game files. This will let Steam look through your steamapps folder to check for any missing or corrupted files of that game.
Temporary game and Steam-related bugs: Like any other software, your app and game might run into several troubles that sometimes can’t be explained. In this case, the best thing to do is to reinstall Steam and the tough game.
As you can see, there are plenty of reasons for this issue, so follow the detailed methods described below to prevent and fix this issue once and for all.
What can I do if nothing happens when I click Play on Steam?
1. Check your antivirus
According to users, sometimes your antivirus can interfere with Steam, and that will cause this and many other problems.
Try disabling certain antivirus features, such as real-time scanning or folder protection, to check if your antivirus is the problem. You might have to disable your antivirus altogether if that doesn’t work.
Sometimes disabling antivirus doesn’t help. If that’s the case, you might have to remove your antivirus altogether.
If removing the antivirus solves the issue, this would be a perfect time to consider switching to a different antivirus.
Many efficient antiviruses can support your system for gaming purposes and protect against malware as well.
To discover the most suitable program for you, it is advised to pick from the best antivirus software for gaming computers carefully.
2. Start Steam as an administrator
➡ One-time process
Locate the Steam shortcut, then right-click on it.
Choose to Run as an administrator.
Confirm the changes by clicking on Yes.
Once Steam launches, try running any game.
➡ All-time process
Go to Steam’s installation directory and locate exe.
Right-click on it and choose Properties from the menu.
Go to the Compatibility tab, then check the Run this program as an administrator option.
Click on Apply, then on OK to save changes.
If this method works, you’ll need to repeat it every time you want to play anything on Steam. However, you can set the app to always run with administrative privileges. To do that, follow the above steps.
After making this change, Steam will always start with administrative privileges, and the issue should be permanently resolved.
3. Change the download region
Hit the Windows key, input Steam, and open the app.
From the top-left corner of the window, click on Steam.
Now, navigate to Settings.
From the left window pane, select Downloads.
Look for the Download region and choose a location closest to you.
Alternatively, you can choose a location that is not the closest but still near.
After making this change, restart Steam and try to rerun your game.
4. Ensure that Visual C++ Redistributables are installed
If you can’t launch a game on Steam, the issue may be related to the missing components.
Many games require Visual C++ Redistributables to run, and if a Steam game is preparing to launch, then nothing happens; it’s possible that you don’t have the necessary Visual C++ components installed.
There are several ways to install these missing components, but the easiest method is to check the game’s installation directory.
Look for vcredist directory and install all files from it. There should be two files available, one for x64 and one for the x86 version of Windows, and you need to install both.
After that, try to start the game again and check if everything works. Remember that you might have to do the same for other Steam games that are giving you this problem.
5. Verify the integrity of the game cache
Press on the Windows key, search for Steam and open it.
Click on Library.
Right-click on the game and choose Properties from the menu.
Navigate to the Local Files tab.
Click on the Verify integrity of game files button.
The verification process will now start. Depending on the size of your game, this process can take about 15-30 minutes, so don’t interrupt it.
Once the scan is completed, the game should be completely repaired, and the Steam game launches, then closes issue should be fixed.
Use the following keyboard shortcut to open Task Manager: Ctrl + Shift + Esc.
Locate Steam in the Processes tab.
Click on each instance, then choose End Task.
Once you end all Steam processes, relaunch Steam and check if your game won’t launch after clicking Play. Remember that this is just a workaround, so you might have to repeat it every time you encounter this issue.
8. Reinstall the problematic game
Press the Windows key, type Steam, then open the desktop client.
Go to your Library.
Locate the game you can’t start, right-click it and choose Delete Local Content.
When the confirmation dialog appears, click Delete.
Wait while Steam removes the selected game.
Once the game is removed, download it and check if the problem is still there.
To altogether remove the game, some users suggest removing the game folder from the steamapps directory and all game-related directories from the Documents folder.
This might be a drastic solution, and you should use it only if the other steps don’t work for you.
However, if the Steam game won’t launch after clicking on Play, we have one more option you can try.
9. Reinstall Steam
Hit the Windows key, type Control Panel, then open it.
Now, navigate to Uninstall a program.
In the shown list, search for Steam, click on it, then choose to Uninstall it.
From the top-right corner of the window, click on Install Steam.
Follow the on-screen instructions to reinstall the app.
After the installation, input your Steam credentials, then log in.
Now, check if you can play the game you need.
Once you launch Steam, you should be able to start all your games after clicking Play without any issues. This is a drastic solution, and you should use it only if the previous solutions didn’t work for you.
Can I uninstall Steam without losing games?
If you uninstall Steam from the Apps and Features on your PC, it will remove everything that has to do with the app, including your games.
However, if you know you will be reinstalling the game soon, you can move the Steamapps folder from the Steam directory following the path below to another location: C:\Program Files (x86)\Steam\steamapps
After you reinstall the game, you can now move the folder into the Steam folder.
What other Steam games related problems should I be aware of?
Steam game already running error – According to some users, their client seems active and thus preventing them from starting the game. If you’re also facing this issue, check out some valuable solutions.
Steam game not launching at all – Worldwide players reported that they cannot play any game on Steam, and some of them have reported missing executable errors. Fortunately, there are always ways to effortlessly solve this kind of trouble.
Game instantly closes on Steam – In this case, Steam games will start, then immediately close, with no error message. For those of you who are experiencing this problem, make sure you read our dedicated guide.
We hope that you managed to fix today’s problem using one of our solutions. For any additional questions, do not hesitate to leave a comment in the section below.
If you want to know how to migrate your Adobe Acrobat to a new computer, you have to look no further as you just found the perfect step-by-step guide to help you with this.
Having the capability of migrating the data from your Adobe applications to another PC can be extremely useful, as it can help if you want to set up a new PC, or if you want to fully back up your settings.
Because our goal is to help you sort this problem out fast, in this article we will explore the best methods to sort this issue out fast and easily.
Please follow the steps presented in this list in the order that they were written to avoid any problems.
How can I move Adobe Acrobat to a new computer?
1. To start off, open the PC from which you want to transfer the license.
2. Launch Adobe Acrobat, click theHelpmenu, and selectDeactivate.
3. Select Suspend activation and then transfer the license to the new PC.
4. After successfully transferring the Adobe Acrobat license to your new PC, come back to the original PC’s screen and choose toDeactivate Permanently.
It is recommended that you only perform step number 3 if you’ve already activated the license on the newly configured PC.
Please be aware that if the activation of your license is not successful, you can come back to the Help window on the original PC, and re-activate it there.
5. Log into your My Adobe account on the official website.
6. Hover your mouse over your name and select My Products and Services.
7. Click the arrow next to Adobe Acrobat to see the license key.
8. Now it is time to download the installation file. Open your new PC and navigate to the Adobe website.
9. Log into your account using the same credentials from the original activation of your license.
10. If you bought Acrobat online, hover your mouse over your profile name and choose My Orders (or download a trial version if not).
11. Find the Adobe Acrobat app in the list and chooseDownload for it.
12. Run the installation process and follow the on-screen instructions.
13. Copy-paste or type in the license key for your account.
Setting up Adobe Acrobat on a new PC is a simple and fast process that can be done within minutes. All that you need is two PCs and a good internet connection.
What you need to do is: deactivate Acrobat Acrobat on the old computer, find your Adobe license on the official website, download the installation file and perform the installation on the new PC.
In today’s how-to guide we explored the best methods to transfer your version of Adobe Acrobat to a new PC. We hope this guide has proven useful in your situation, and that you managed to sort the issue out fast.
Please feel free to let us know if you found this article helpful, or if you have any suggestions or opinions to share with us.
You can get into contact with our team by leaving a comment in the section found below this article.
Error Code 12 in Sims 3 has become common and has troubled users. Many posted about it on forums, and while some got reliable resolutions, others were left fending for themselves.
The complete error message, in this case, reads: An unexpected error has occurred while saving: Error Code 12. Please consult the readme for details.
However, unlike other errors, this one is easily fixable and wouldn’t require much of your time and effort. So, let’s find out how you can fix Error Code 12 in Sims 3.
Why does Sims 3 error code 12 appear?
Users reported encountering Sims 3 Error Code 12 while saving their game’s progress. And it’s usually due to two reasons: there aren’t enough free system resources to save the game, or Sims 3 has hit the threshold of memory consumption.
Other than that, outdated graphics drivers or the game’s built-in graphics setting can also be an underlying cause. So, let’s find out the solutions and a few workarounds for Error Code 12 in Sims 3.
How do I fix Sims 3 error code 12?
1. Close all background programs and software
Press Ctrl + Shift + Esc to open the Task Manager.
Individually select the programs listed under Apps and click on End task.
First, free up more RAM for Sims 3 before playing it by closing programs presently running on the computer. Then, make sure that you don’t terminate any critical ones.
Then close background processes for third-party programs listed under Background processes. The best processes to terminate there are those for UWP Windows 10 apps, such as Edge, Photos, Skype, Mail, etc.
In addition, check if your system tray includes any icons for third-party programs. If so, close the programs from there by right-clicking them and selecting their exit (close) options.
Once done, verify if Error Code 12 in Sims 3 is fixed. If not, head to the following method.
2. Increase the Virtual Memory
Press Windows + S to open the Search menu, enter Adjust the appearance and performance of Windows in the text field, and click on the relevant search result.
Navigate to the Advanced tab, and click on Change under Virtual Memory.
Next, uncheck Automatically manage paging file size for all drives and select Custom size.
Select C: drive from the list and fill in the virtual memory allocation in the provided fields.
Initial Size (MB): 1.5 x (Available physical memory)
Maximum size (MB): 3 x (Available physical memory)
Say if the available memory (RAM) on the computer is 8 GB, the Initial Size would be 12288 MB (1.5 x 8 x 1024), and the Maximum size would be 24576 MB (3 x 8 x 1024).
Once done, click on Set and OK to save the changes.
You are now required to restart the computer for the changes to come into effect.
After you have increased the Virtual Memory (Page File), check if Error Code 12 in Sims 3 is resolved. If the memory allocation and its shortage led to the Sims 3 saving error, things should now be up and running.
3. Try saving with the Save as option
Instead of selecting Save, try clicking the Save As option instead. Then give the save game a completely different file title. In addition, don’t include spaces within your saved game’s file title.
Overriding the saved file persistently has also caused the error for many. Instead, experts recommend that you keep progress on different files or change the title.
4. Delete game save folders
Press Windows + E to open File Explorer and navigate the following path:C:\Users\Username\Documents\Electronic Arts\The Sims 3\Saves
Next, select all folders in Saves that include a .bad extension at the end of their titles, and hit the Del key.
Now, select folders that have your saved game’s title with a .sims3 or .backup extension, and move them to a new folder named Backup on the desktop.
Deleting game save folders that end with a .bad extension might also fix Error Code 12 for some Sims 3 players. This has worked for many, and we recommend giving it a try. If the problem remains unresolved, head to the final method.
5. Reduce Sims 3’s graphics settings
Launch Sims 3, click the ellipsis at the bottom left, and select Options from the menu.
In the Graphics tab, untick the Enable Fullscreen Mode setting, choose a lower resolution from the Screen Size dropdown menu, and then click on the check mark icon to save the changes.
Players can also minimize Sims 3’s RAM consumption by lowering graphics settings. And if nothing else has worked, this is probably the only solution to Error Code 12 in Sims 3.
Also, corrupt game files or misconfigured system settings are likely reasons behind the crash. Finally, some users reported running an outdated version of the game or the OS, which caused the crash. Besides, removing the recently installed mods did the trick for many.
That’s all there’s to Error Code 12 in Sims 3 regarding the game crashing in Windows. By the time you are done with the guide, the error should be long gone, along with other minor issues with the game.
Remote users can encounter several issues whenever they make some changes on their side. Windows 11 Remote password change breaking VPN certificate – this is one of the errors users complain about. It means that changing the password of the Remote computer has affected the VPN certificate.
Furthermore, making modifications like updates and password changes on Windows 11 can prompt problems with VPN credentials.
The Remote computer controls how components like the Virtual Private Network (VPN) work. Hence, altering the Remote password will break the VPN certificate and impede the connection between the computer and the VPN.
Nonetheless, the remote password change prevents other remote users and prompts the connection to be terminated by the remote computer Windows 11 error. The issue occurs if the system can’t access its user cert store because its password hasn’t been updated.
Hence, this article will discuss why the remote password change breaks the VPN certificate. Likewise, we’ll guide you through how to fix the Windows 11 remote password change breaks VPN certificate error.
Why does remote password change break the VPN certificate on Windows 11?
Remote password change breaks the VPN certificate because the system cannot read its certificate store. The reason for this difficulty is the alteration wasn’t made on the system, preventing it from accessing the cert store.
Furthermore, users may encounter several issues with their computer if Windows is not up-to-date. Hence, we recommend you update Windows to avoid facing Windows update errors on your remote computer.
How do I stop remote password change from breaking the VPN certificate?
1. Delete and bring back the VPN certificate
Press the Windows + R keys to prompt theRun window.
Type in certmgr. msc in the search box and press Enter.
On the List of Certificates window, go to the certificate to delete and right-click on it.
Click on Delete.
Go to the Start menu and select Run.
Type MMC in the search box to open the MMC window.
Select Add/Remove Snap-In from the File menu.
Go to the Available snap-ins list on the Add or Remove Snap-ins window.
Choose Certificates and select Add. (Add certificate snap-in)
Select Computer account and tap Next.
Click on the Local computer and select Finish.
Then, click OK to save the MMC console file.
This solution helps to delete the broken certificate and bring in a new one from the snap-in. It will help fix the issue.
Accessing webcam settings may not be as intuitive as you’d think, but we’ll walk you through all the steps.
Where are my webcam settings?
The webcam settings in Windows 11 are available in the Camera app on the PC. It offers a bunch of customizations to users, including the ability to change the Video Quality and Flicker Reduction.
Camera app
The camera app comes preinstalled on the PC and helps you capture pictures and record videos. Also, it’s a great tool for modifying the camera settings. However, several users go with third-party apps to access more customizations and modifications.
How can I access the webcam settings on Windows 10?
1. Acces the camera from the Start screen
Click the Start button, type camera, and select the app from the results.
Select the cogwheel button to open Settings.
Now, from the panel on the left, you can do a lot of adjustments like the resolution for photos and videos, time lapse settings, framing grid, and more.
These settings might differ depending on what your webcam is able to do for example your webcam might not support the Spot adjust option, therefore, you won’t have it in the Settings menu.
Go to Microsoft Store and download a webcam app. We discovered Webcam Pro, but you can go with any other app you desire. Just click the dedicated button to get it.
After you install it, you need to select the webcam you want to use. In our case, it’s the integrated laptop webcam, but if you have multiple cameras, you can select the one you prefer.
The next step is to acknowledge that the app can access the webcam.
Now, to access the camera settings, click on Configuration. You will notice a rich pannel of possible camera settings, from brightness and contrast to zoom and roll.
This particular app can handle up to 3 webcams at the same time. You can click the Add webcam button and select them one by one.
We just gave you an example of an application that you can use to access the camera settings. As you can see, it has more options than the Windows Camera app that comes with your OS. Here are some of the additional features you get with webcam software in Windows 10:
What if you don’t want one or more apps to access your camera? Well, you can restrict all desktop apps from using your camera. Or, you can select them from a list with just a few steps:
Click the Windows button and then select Settings.
Next, click on Privacy.
Select Camera from the left pane.
Now, the first decision you can take is to turn off all apps access to your camera by clicking the switch right below Allow apps to access your camera.
If you scroll down in the right pane, you will see that all Microsoft Store apps and desktop apps now have restricted access to your webcam.
However, if you keep the Allow apps to access your camera on, you can only turn off the access to Microsoft Store apps or desktop apps by toggling their individual switches to off. This will allow you flexibility in choosing the apps to restrict from accessing your webcam.
How do I enable or disable the camera access for the users?
If you have more than one account or user on your PC or laptop, it’s good to know that you can change their access to the camera and the apps using it.
As an administrator, you can simply block their access, and that would be a good measure to protect them. Here’s how to do that in Windows 10:
Click the Windows button and select Settings.
Select Privacy.
Now click on Camera from the left pane and check the current status for the camera access. Our camera access is turned on.
If you want to change that, just click the Change button, and it will show you the switch to change this setting.
By turning the switch off, we prevented other users from accessing it. Of course, if you want, you can switch it back at any time by following the same steps.
We have to mention that by blocking the user access to the camera, you are also blocking any apps from using it.
Now that you know how to grant or block camera access for other users, you have a few different methods to open the camera app and change its settings.
If your PC doesn’t have an integrated webcam, find out the best 4K webcams available right now.
Don’t hesitate to leave any other questions in the comments section below if you want to know more about the subject.
If your PC feels sluggish and you’re noticing unusually high memory usage, you’re not alone. Many users have reported Windows 11 using 10GB of RAM or more with minimal activity. In this guide, we’ll help you get to the bottom of why your RAM usage is so high in Windows 11 and walk you through practical steps to fix RAM usage issues and optimize performance.
Whether Windows 11 is using too much RAM due to background apps or misconfigured settings, we’ll show you exactly how to take control and free up memory.
How do I fix high memory usage in Windows 11?
1. Check the RAM usage in the Task Manager
To check the RAM usage in Windows 11, go to the Windows search box. Type in Task Manager and select it.
Click on More Details to expand the list.
In the Processes tab, check the programs using too much memory.
Right-click on the ones you wish to terminate and select End task.
Close the Task Manager.
High RAM usage is usually caused by software acting up or glitching out. The best way to deal with this is to go into the Task Manager and terminate that task.
Click on the Windows Search Bar and select Task Manager.
In the Task Manager, go to Startup, right-click on an app, and then select Disable.
Close the Task Manager.
Startup programs will cloud your PC and use up lots of resources. Nowadays, most of the software you install will start with your Windows.
Disabling all unnecessary startup programs and only keeping those crucial to your system will keep things running optimally.
You can also optimize and clean your system, fast and easy, with the help of professional repair software.
3. Disable the SysMain service
Open the Windows Search Bar and type in Run.
In the Run box, type services.msc then press Ok.
Under the services tab, search for Sysmain, right-click on it and select Properties.
In the new window, set the Startup type to Disabled.
Then, go to Service Status, select Stop, and click Ok.
The SysMain service preloads software that you frequently use to the RAM to access quickly. First, try disabling the feature to see if it fixes the issue.
4. Defragment your hard drive
Open the Windows Search Bar, type in Defragment and Optimize Drives.
Choose the drive you wish to defragment and click Optimize.
Wait for the process to finish.
If you’ve been using your device for a long time before finally upgrading to Windows 11, your disk might need to be cleaned and optimized.
Thankfully, you can quickly fragment your hard drive without needing to install any third-party software.
Open the Windows Search Bar and type in Windows Security.
Select Virus & threat protection.
Next, click on Turn on.
Afterward, choose Quick Scan.
Wait for the system to finish scanning.
The Windows Firewall malware database gets updated every week, but the idea of a virus breach is not out of the question.
If you tried scanning your computer and nothing bad came out, you need to use something better to eliminate the malware.
Many tools can thoroughly scan your device for the newest malware and take action against any threats, including spyware, adware, and other cyber attacks. TotalAV is an excellent example in that regard.
TotalAV
Excellent software that offers protection for your device against malware thanks to its good range of features.
If you keep running low on RAM while using Windows 11, your system might not be good enough to handle the operating system.
You need at least 4 Gigs of RAM to run it, but for the OS to run well, you need 8 GB, or 16 if possible. Check out our detailed post on Windows 11’s system requirements to find out more.
NOTE
Official Windows 11 system requirements include: – 1 gigahertz (GHz) or faster CPU with 2 or more cores – 4 GB RAM – 64GB or larger storage – UEFI, Secure Boot capable device – TPM 2.0 – GPU compatible with DirectX 12 or later with WDDM 2.0 driver
While it is the minimum to operate Windows 11, you will need 8GB of RAM for better performance.
Does Windows 11 eat more RAM?
There are several reasons why Windows 11 could utilize more RAM than previous versions. The most important one is that it significantly improves Windows 10 in many ways.
It is a powerful operating system that provides a wealth of features but places a significant demand on the device’s hardware.
If you notice that your RAM usage is about 80% or more, you shouldn’t be concerned immediately. All the currently running software will most likely use your RAM.
For example, if you are using Google Chrome and have multiple opened tabs, your RAM usage will naturally skyrocket, and it’s not concerning.
High RAM should never be considered a problem unless no apps are opened, and the computer is experiencing this while idle; in this case, there are many reasons.
Users reported a plethora of similar issues that we will be addressing below. First, however, here are the most common ones:
DWM high memory usage in Windows 11 – The issue of excessive memory utilization is brought on by Desktop Window Manager for a variety of reasons; the most common of which are problems with the performance of Windows.
Windows Explorer high memory usage in Windows 11 – One of the most common causes is the utilization of obsolete graphics card drivers.
High RAM usage in Windows 11 when idle – You are opening an excessive number of applications or services; which is one of the primary causes of Windows 11’s high memory utilization.
High memory usage in Windows 11 when nothing is running – Put an end to pointless applications running in the background.
Vmmem Windows 11 high memory usage – You can terminate any applications or services that aren’t essential by using Task Manager.
OneDrive high memory usage in Windows 11 – To solve this problem, the most effective solution is to modify your virtual machine to prevent it from using a significant amount of the system’s resources.
Windows 11 memory leak – Stop using the app that’s causing the problem in order to fix the memory leak in Windows 11.
How do I clear my RAM cache?
You could use the Windows Refresh tool that Microsoft provides; this tool removes all applications from your computer and leaves it in a new state.
However, other tools are more powerful and designed solely to assist your computer in regaining its groove and functioning as though it has recently been subjected to a factory reset.
Memory cleaners are programs that scan your computer and fix any issues that they find. They do this by defragmenting your hard drive, repairing the registry, and freeing up your computer’s memory by removing unnecessary or duplicate items.
However, some memory cleaners go above and beyond this essential function. So are these 7 memory cleaner software that we have hand-picked for you to try out.
Is 40% RAM usage normal?
Any amount close to 40% of your total RAM usage is considered normal because your Windows are actively using it.
Of course, the percentage will be lower if you have a high amount of RAM. So, for example, you won’t get 40% RAM usage while idling with 32GB of total available memory.
Since we are talking about efficiency and system resources, why don’t you check this article about enabling efficiency mode on Edge to make the best of your device?
High RAM usage on Windows 11 will negatively affect your system’s flow, so solving this problem is mandatory. Let us know in the comments area below if you managed to do so.
LastPass and Dashlane are two of the popular password management software that is available for web browsers as well as desktop clients.
However, after the recent security concerns with LastPass, you may consider moving to Dashlane. If so, you might be wondering how to migrate from LastPass to Dashlane.
It is a simple process because everything you save in LastPass can be imported into Dashlane.
To make it simpler, in this article we have listed all the steps you need to follow to migrate from LastPass to Dashlane successfully.
Quick tip:
While Dashlane is a great password manager, we prefer using RoboForm since it’s got more security features.
RoboForm offers unlimited storage with two-factor authentication passwords for an extra layer of security. In addition, it backs up and syncs your passwords across all your platforms.
RoboForm
Keep all your passwords safe in one place for quick access with RoboForm.
Press Ctrl + S. Enter a name for the file but make sure the extension is .CSV. To do this, click the Save as drop-down menu and select All Files.
The file name, for example, will look like Passwordsfromlastpass.csv.
This step is only for that user who is unable to save the LastPass data directly from the extension. If you were able to save the export file from the extension, you don’t need to follow the above steps.
3. Importing data to Dashlane
Now that you have the exported CSV file, here is how to import it into Dashlane.
Open Dashlane application and click on File.
Go to Import Passwords > LastPass.
Select the imported CSV file and click Import.
Once the import process is successfully Dashlane will display how many passwords and other data have been imported. You can view the relevant data by clicking the appropriate section.
To view the password, click the Password section, and for credit card information click the Payment section. Make sure you delete the .csv file once the import process is over.
4. What to do if Dashlane fails to import any data?
Make sure all the password have site address in the csv file. Any password that does not have a site address will not be imported by Dashlane.
Open LastPass again and check if all the passwords have a site address. If not, add the site address for the password in LastPass and go through the import process again.
Alternatively, you can also add the site address to the passwords manually in the CSV file.
Migrating from LastPass to Dashlane is as easy as importing and exporting a .CSV file.
By following the steps in this article you can import all your data from LastPass to Dashlane with ease and keep your data safe.
If you have any more questions or suggestions, leave them in the comments section below and we’ll be sure to check them out.
The remote connection feature means users can access another desktop without being present. Hence, we’ll discuss Windows 11 multiple remote desktop sessions and how users can enable it.
The RDP (Remote Desktop) is an operating system feature or software that allows users to connect and interact with a computer in another environment.
It permits you to run a personal computer in an environment and remotely access it on a different client computer in a separate location. In short, it allows a computer (client) to connect to another computer (host) from a different environment.
Furthermore, the multiple Remote Desktop sessions can vary according to the software or operating system.
However, the limit of RDP sessions that can run simultaneously is one. Likewise, Windows 10/11 only allows the establishment of a single Remote Desktop session (RDP) on one computer by default.
It means that Windows will disconnect the current Remote Desktop session if there is any attempt to establish a second connection.
Can you have multiple RDP sessions?
Windows allows users to establish only one Remote Desktop session between the client and the host by default.
Nonetheless, there are some ways you can have multiple Remote Desktop sessions without encountering difficulties. However, having more than one Remote Desktop session can vary depending on your project or program.
The maximum number of Remote Desktop connections a server can handle is two simultaneous connections, according to Windows.
However, some programs allow you to set the Remote desktop multiple logins to about 50 users per Windows Server. Also, some users claim that it is possible for 100 concurrent connections to both RemoteApps and Remote Desktop Session Host.
Nonetheless, some factors may determine the limitations of what the hardware and the server can handle.
Some of these factors are speed and type of CPU installed on the server, amount of RAM installed in the Session Host (remote desktop) server, and lots more.
Quick tip:
Using a software that provides you access to applications and desktops can be very helpful. We recommend Parallels Remote Application Server (RAS) because it offers an excellent and intuitive experience.
You can have easy remote access across devices and networks to maximize your productivity and efficiency. You can also convert raw data into custom visual reports to reveal traffic and resource usage from your network infrastructure.
Parallels Remote Application Server
Manage your applications with centralized controls and permissions with this outstanding software.
How can I have multiple remote desktop sessions in Windows 11?
1. Download and run RDP Wrapper
Go to GitHub Stascorp and download the RDP Wrapper from the GitHub Repository.
Open the file and unzip the RDPWrap-v1.6.2.zip file.
Run the install.bat file.
Go back to the RDPWrap-v1.6.2.zip file in downloads and run the RDPConf.exe (RDP Wrapper configuration utility) file.
In the Diagnostics window, ensure that the Wrapper, Service, and Listener states are all green.
Run the RDPCheck.exe file.
Connect multiple RDP sessions from remote computers and see how it works. However, Windows will allow users to access various RDP sessions simultaneously.
Likewise, using the RDP Wrapper to enable multiple RDP sessions allows you to do it without altering the termsrv.dll file.
To learn more about this file, don’t miss our dedicated termsrv.dll article.
3. Modify local group policies
Click Start and type gpedit.msc, then press Enter to prompt the Local Group Policy Editor window.
Go to: Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections
Disable the Restrict Remote Desktop Services user to a single Remote Desktop Services session policy option.
Go to the Limit number of connections tab and enable it.
Navigate to the RD Maximum Connections allowed tab and set it to 999999.
Click OK to apply the changes.
We recommend that you restart your computer to sync the changes properly.
How do I switch between two RDP sessions?
Users can use some Remote Desktop Service shortcut keys to perform functions like switching between two RDP sessions.
However, the Alt + PAGE DOWN keys combination can help users switch between programs running on the Remote Desktop from right to left.
Likewise, ALT + PAGE UP is another shortcut users can use to switch from left to right between RDP sessions. Also, the ALT + INSERT keys combination is a way of switching between the running programs.
Every PC user has accidental edits at one point or another. Either you or a colleague makes undesirable but irreversible changes to a mission-critical photo, PDF, CAD, or any other file type on OneDrive.
If you cannot find the original file, you may have to create it from scratch, again. That can be time-consuming, not to mention expensive, depending on the nature of the lost details or data.
How do I restore a OneDrive file to a previous version?
1. Use OneDrive Sync Version History
Open File Explorer.
Right-click the file in question and choose View version history. Doing this reveals all previous versions of the file. It also indicates the modification date and the user who modified the file.
Select the version you want to recover: Your options here include restoring or deleting the selected file.
Choose to Restore to replace the unwanted file with the selected previous version.
You can access OneDrive Sync Version History via File Explorer’s context menu to recover any file.
Windows 10 and macOS users can recover previous versions of edited files using OneDrive Sync Version History. The feature enables the synchronization of your PC and OneDrive files.
As such, it lets you track older versions of files within your desktop environment, enabling the recovery of items edited by mistake.
2. Restore previous OneDrive versions on the web
If you’re looking to restore a previous version of a OneDrive document, you can also do this via the web version of the app. From the OneDrive.com page, you can see all the previous versions of a file, as well as all of the modifications that were done to it.
Moreover, after you restore your document to a previous version, the current one becomes a previous version itself, for future use.
1. Open your preferred browser.
2. Go to OneDrive.com.
3. Locate the file you wish to restore to a previous version and right-click it.
4. Select Versionhistory: This reveals the modification record of the particular file. It also indicates the date of all previous versions alongside the names of users who made the changes.
5. Choose the desired version and click Restore on it.
Just in case you need to confirm the contents of the file before doing anything else, click Open File. There is also the option of downloading the preferred file version from OneDrive to your PC.
These are some quick ways to restore a OneDrive file to a previous version. Be sure to follow all the steps and you should be able to do it yourself in no time.
If you have any other questions or suggestions, don’t hesitate to leave them in the comments section below.
Although Steam is a popular service among gamers, it still has its fair share of issues now and then. One of the most frequent issues that still surprises us is the Steam access is denied error.
Many users complained that this error might sometimes linger and can be a pain to get rid of, no matter what you try.
Therefore, we compiled a list of the most effective (tested) methods you could apply to eliminate this annoying issue.
In addition, we consider properly presenting a list of the most common reasons that explain this irritating error, so make sure you read them carefully.
Why am I getting the Steam access denied error?
Even if this problem can happen all of a sudden, and most of the time, it goes away after simply refreshing the page or restarting the app; there are several other reasons you should be aware of:
Access restricted from certain IP addresses – In this case, we strongly recommend switching your IP address by using specialized software and we’re going to recommend the best on the market.
DNS cache – These might generate security or Internet connectivity-related problems that are also some of the most important causes of the Steam access denied error. Flushing DNS will clear your cache’s IP addresses or other DNS records. In addition, you can also try to change your DNS. It is a simple process, and we’ll show you how to perform it efficiently.
Integrity of files – The Steam access denied error could also occur due to missing textures or other content in-game, so you’ll have to verify if the Steam game’s files are installed correctly.
Antivirus software – Some antivirus software might have set some too protective rules blocking your access on Steam. In this particular situation, it’s best to manage them according to your needs.
Our guide will cover the entire spectrum of issues mentioned above and give you access to a quick and efficient solution for each situation. Make sure to follow them strictly to avoid causing any other problems.
Moreover, users reported similar issues that can also be fixed with the solutions below. Here are the most common ones:
Steam Access denied 0x5 – It could help to run Steam in administrator mode.
Reference 18 Steam Access Denied – Check if the servers are working correctly.
Steam access denied 15 – You may obtain this outcome while submitting, accepting, refusing, or canceling a trade offer.
Steam end process access denied – Check the game files to ensure they are intact.
GeForce Now Steam access denied – In order to play games from their Steam library, users of Steam will need to download the GeForce Now software and connect their Steam account to the GeForce Now service.
Steam app access denied – Sometimes, because of lengthy activity on the Steam account and changes in system security settings during that time, your action may be viewed as interrogative, which will result in a Steam Access Denied message.
Let’s jump into the list of solutions to the Steam access denied issue without further ado. Follow along!
How can I fix the Steam access denied on this server error?
1. Check if the servers are down
If it’s a service-wide error that affects all Steam users, you can be sure that Valve already knows about it and is doing its best to solve it quickly.
We’ve briefly mentioned at the beginning of our guide that most of the time, the Steam access denied error seems to sort itself out.
Therefore, if you’ve already tried all of our suggested fixes and nothing seems to work, the problem may be on Steam’s side.
In this case, your best course of action is simply waiting for Valve to take care of this situation. In the meantime, you can check the Steam server situation.
2. Use a specialized VPN
It’s not unheard of that sometimes; Steam might temporarily restrict access from certain IP addresses.
This is precisely why an issue such as the Steam access denied error exists. Maybe there were too many requests from your IP address; who knows?
To rule out an IP block, even a temporary one, you can try changing your IP address and see if you’re still getting the error message.
VPNs such as Private Internet Access are one of the most effective ways to change your IP address since they encrypt traffic and spoof your location.
Private Internet Access has an extremely user-friendly interface, being one of the most easy-to-use and popular VPNs around the world.
It offers thousands of servers located in more than 70 countries. Plus, with its ultra-strong encryption generated with the AES-256 bit model, this VPN will always make sure that user data stays safe and is not discovered by cyber-criminals.
PIA’s manufacturers have started offering dedicated IP addresses to customers. By this, you have to consider having the same public IP address every time you connect to the VPN.
Also, Private Internet Access includes a multi-hop feature that routes your traffic through two VPN servers instead of just one.
Check out Private Internet Access’s most important features:
Tons of servers in worldwide locations
AES-256 bit encryption
Multi-hop features
Private Internet Access
Try PIA if you want to hide your IP address and encrypt your online traffic while running Steam.
Press the Windows key on your keyboard. Type controland press Enter key to open the Control Panel.
Select Network and Internet.
Go to the Network and Sharing Center.
Select the Change adapter settings option.
Right-click your active network and select Properties.
Locate and select Internet Protocol Version 4 (TCP/IPv4), then click on Properties.
Select the Use the following DNS server addresses option.
Type the following values in the appropriate fields: Preferred DNS Server: 8.8.8.8Alternate DNS Server: 8.8.4.4
Click OK to save the changes
A limited DNS server can cause various connectivity issues or conflicts with the Steam client.
With that in mind, you may want to try to switch to a better DNS alternative other than your ISP-assigned one.
There are various free public DNS servers you can use, and we’ll teach you how to perform this configuration safely.
Keep in mind that you can use any third-party DNS server you prefer. The one we used in our example is Google’s public DNS, and it works great.
5. Verify Integrity of Steam Files
Hit the Windows key, search for Steam, then open the app.
If you’re not logged in, input your credentials, then click on Log In.
Now, from the main menu, click on Library.
Right-click the affected game and select Properties.
Go to the Local Files tab.
Click on the Verify Integrity of Game Files button.
Wait for the file validation to come to an end.
If the error is occurring while accessing a specific game, you may want to verify the integrity of files to check if the files are installed correctly. Steam offers a built-in solution to do the same. Here is how to do it.
Steam will scan the files for the game you selected and will try to validate them.
If you receive a success message at the end of the scan, your game files are correctly installed. Thus, the issue was not caused by the game files.
6. Manage antivirus/firewall rules
Checking security software on your computer for rules against certain services is always a good start when encountering connection issues.
For instance, if your firewall blocks traffic to and from specific apps, such as Steam, they might not work as intended.
In turn, you may encounter error messages such as the Steam access denied one. The same goes for antivirus/antimalware software that you installed on your PC.
If security software has decided that Steam or some of its services are bad for your PC and should be blocked, you may encounter connectivity issues.
Can’t connect to Steam even though I have Internet?
Sometimes, problems with a network may be traced back to a piece of malfunctioning hardware, such as a router or a switch. Or by usage behaviors that were not expected. Such are spikes in the network’s available bandwidth and variations in the application’s setup.
However, the error that is being issued by Steam might also be the result of problems with their systems or security breaches that they have had.
You should know that the Steam access denied error is not the only one that might occur while running this app. Because it is important to be aware of and prevent all the threats that you might face, take a look at the following list:
AppHangB1 error on Steam – This usually causes your PC to become unresponsive or extremely slow, so it can be extremely annoying. Fortunately, we’ve prepared some solutions that will certainly solve this issue.
Application load error 65432 on Steam – It seems like this error message pops up for some players when they try to launch Skyrim and other Bethesda games.
Application load error 5:0000065434 in Steam – According to some users, this error appears when they start the game from Nexus Mod Manager. However, it also loads fine if they start it from Steam. If you’re curious about solving this annoying problem, make sure you check our dedicated guide.
General Steam errors on Windows 10 – We’ve also compiled an article that indicates the most popular Steam errors on Windows 10 and their easiest fixing solutions. We strongly recommend saving this guide somewhere for bad days.
All things considered, if you’ve experienced the dreaded Steam access denied error, there are some ways that you could fix it.
However, sometimes the issue may be on Steam’s side, in which case you should just wait for Valve to sort things out.
In case you encounter additional questions regarding today’s subject, feel free to use the comment section below.
We’re sure you are pretty excited about owning a Steam Deck, so we’ll take a closer look at this fantastic gaming device.
Remember that Valve’s handheld gaming PC has been released to the general public on February 25, 2022, but buyers had to wait a lot for their devices to be delivered.
If you got one, or you’re ordering one, you might want to know how to change Steam Deck’s resolution or what are the best Steam Deck verified games. And, if you are curious about the whole BIOS environment for the Steam Deck device, you came to the right place.
Does Steam Deck have BIOS?
Remember that even though Valve’s Steam Deck runs a modified Arch Linux operating system called SteamOS v3.3, you can also install Windows 11.
The new handheld gaming PC is said to have a lot of exciting features, and it is also highly customizable in terms of software.
To answer your question, yes, the Steam Deck has a BIOS, and today we will show you everything you need to know about it.
How do I enter BIOS on Steam Deck?
The process of entering this gaming device’s BIOS mode starts with powering the device off. Afterwards, you can enter Steam Deck’s built-in Settings to access BIOS.
1. Hold the Power button on your Steam Deck.
2. Turn off your Steam Deck by selecting Shut Down from the options that appear on the screen.
3. Press and hold the Power and Volume Up buttons until you hear a beep.
No, unfortunately, you don’t have a factory reset option within the Steam Deck’s BIOS if that’s what you were after.
Instead, you can bring back the device to its original settings by going to the Settings menu and selecting this option. We have a dedicated guide on how to reset Steam Deck to factory settings that you can check out.
This is the situation for the time being as far as Steam Deck BIOS settings go, and you will not get different settings depending on your device’s BIOS version.
Don’t be disappointed, as we’re sure that the lack of a BIOS factory reset option does not make the Steam Deck less than it is.
Steam Deck BIOS update – How to do it?
Even though your average Steam Deck user shouldn’t have to worry about such things in the first place, if you really must know, the BIOS is updated when you update the device’s firmware.
Now, this is an entirely different story if you are asking where to find it because it’s as easy as saying Steam Deck.
How do I update my Steam Deck’s firmware?
Access Settings.
Navigate to the System tab and click on Apply to install the updates.
Now you better understand the device’s BIOS files and what it’s like dealing with this part of the OS on this handheld gaming rig.
We’ve shown you how to do the Steam Deck BIOS boot as well, so you are more than prepared to go forth with whatever you want.
After you receive the Valve gadget, take your time and carefully go through the Steam Deck initial setup for everything to run smoothly. However, you will find out that on rare occasions when there are errors on the device, fixing it is pretty simple.
Many users tend to use two or more monitors on their computer to get more workspace and improve their productivity.
However, it seems that there are some issues with Windows 10 with users complaining that the dual monitor is not extending, among other problems.
Now, some people are complaining that Windows 10 only detects one of the two monitors that are plugged in.
Windows not being able to detect a second monitor can be a big problem, but it is not the most difficult issue to fix. And we will show you how to do it in this guide.
Why is my second monitor not detected?
The second monitor not detected issue has different variations, as reported by users. Below are some of the common ones and their causes:
Windows 10 can’t detect the second screen: This is a just a variation of this problem, and if you’re having issues detecting a second screen, you might want to try some of our solutions.
Windows 10 can’t detect HDMI, VGA monitor: If your monitor can’t be detected by Windows 10, that can be a big problem. According to users, these types of problems usually appear while using HDMI or VGA monitor.
Second monitor not recognized Windows 10: Many users reported that Windows 10 can’t recognize the second monitor. This is a common problem, but you should be able to fix it by using one of our solutions.
Windows 10 second monitor not working: This is a common problem that can occur with dual monitor configurations. Many users reported that second monitor isn’t working on their Windows 10 PC.
Windows 10 can’t find my second screen: Issues with dual monitor setups are fairly common, and many users reported that Windows 10 wasn’t able to find the second screen.
Second monitor flickering Windows 10: This is another problem that can appear on dual monitor configurations. Many users reported that the second monitor is constantly flickering.
Windows 10 second monitor goes black – If you’re using a dual monitor setup, you probably encountered this issue before. According to users, their second monitor goes black or to sleep for unknown reason.
Windows 10 second monitor keeps turning off – This is another relatively common problem on dual monitor configurations. However, this isn’t a serious issue, and you should be able to solve it by using one of our solutions.
These issues are commonly caused by display drivers but don’t worry, there are a few simple solutions that can help you out.
How do I get my computer to recognize a second monitor?
1. Update your display driver
1.1. Update drivers manually
Right-click the Start button and select Device Manager.
Double-click the Display adapters option to expand it.
Choose Update driver.
Select Search automatically for drivers.
Wait for the search to complete and install the updates.
Aside from using the built-in Windows built-in updater, you can also go to your graphic card manufacturer’s website, find your graphic card, and download drivers for it.
While searching for drivers, make sure that you download the latest drivers, preferably ones for Windows 10.
1.2. Update drivers automatically
Downloading drivers manually is a process that carries the risk of getting the wrong driver installed, which may lead to serious malfunctions.
The safer and easier way to update drivers on a Windows computer is by using an automatic tool such as Outbyte Driver Updater.
This awesome tool automatically identifies each device on your computer and matches it with the latest driver versions from an extensive online database.
First, you need to download and install Outbyte Driver Updater. After installing, the software will start running automatically and identifying any driver problems on your system.
After a few seconds, you will get the full report and a list of potential drivers to install. The only clicking required is on the Update all button that you will see on top of the list.
You can also update individual drivers by checking their corresponding boxes on the left and pressing their update buttons from the right.
Outbyte Driver Updater
This excellent light tool will update your drivers automatically, with minimum effort and time.
Press the Windows key + X and select Device Manager.
Double-click on Display adapters.
Right-click your driver and select Uninstall device.
Now, check the box for Delete the driver software for this device.
Finally, click the Uninstall button.
After the uninstall process is complete restart your computer and you’ll have your default driver installed.
4. Use specialized software for multimonitor setup
DisplayFusion is a great tool for Windows that is specialized in setting up your multi-monitor setup. It’s easy to use although it comes with complex features that will transform the multiple monitor management process into a breeze.
DisplayFusion can also be controlled with hotkeys and the experience is customizable by using Power User Menu, TitleBar Buttons, to your own liking.
This awesome tool also offers an impressive library of wallpapers and screen savers to choose from and multi-monitor taskbars to help you keep your windows organized.
You don’t need to commit to it from the start. You can still test it under a free trial period.
Press the Windows key + I to open the Settings app.
Select the System option.
Scroll down to the Multiple displays section and click Advanced display settings.
Click the Display adapter properties for Display 1.
Select the Monitor tab and set the Screen refresh rate to 60 Hertz.
Click on Apply and OK to save the changes.
After doing that, you should be able to use your second monitor. Keep in mind that not all frequencies are compatible with your monitor, so if you want to avoid causing damage to your display, use the frequencies recommended by the manufacturer.
If you’re using driver software such as Nvidia Control Panel or Catalyst Control Center, be sure to change your monitor frequency using these tools as well.
Can’t open Nvidia Control Panel on Windows 10? Don’t worry, we’ve got the right solution for you.
7. Temporarily switch only to the first monitor
Navigate to the Settings app and go to the System section.
In the display settings select Show only on 1 option (By doing that the picture will be displayed only on your main monitor).
Save the changes.
Change your monitor settings to Extended and save the changes once again.
This is a small glitch that can occur, but you should be able to solve it by using this workaround.
According to users, this glitch appears frequently while starting your PC, so you’ll have to repeat this workaround whenever the issue occurs.
8. Install Windows updates
Open the Settings app and navigate to Update & security.
Now, click on Check for updates button.
Finally, click the Install now button to install all updates available.
Windows will now check for available updates. If updates are available, Windows will download them automatically in the background and install them once you restart your PC.
Windows 10 is a solid operating system, but sometimes you might find a certain bug.
Microsoft is working hard to fix all Windows 10 bugs, and the simplest way to keep your PC bug free is to install Windows updates.
Several users reported that Windows 10 can’t detect the second monitor, but they solved the issue by installing the latest updates for Windows.
By default, Windows 10 automatically downloads the updates in the background, but sometimes you might skip an important update.
After installing the necessary updates, the issue should be resolved completely.
9. Connect your monitors while the PC is running
Many users reported that Windows 10 can’t detect the second monitor.
According to users that use dual monitor setup, both monitors work but the second one is always mirroring the first monitor.
To fix the issue, you might want to try connecting your monitors to your PC while it’s running. If you can, try to switch the cables while your PC is running.
For example, if you’re using a DVI cable for the first monitor and HDMI cable for the second, try using the HDMI cable for the first and a DVI cable for the second monitor.
By connecting both monitors while your PC is running, you’ll force the PC to recognize both of them.
10. Set the Project mode correctly
Press the Windows key + P to open the Project mode menu.
Select either the Extend or Duplicate option.
Now, check if the issue is fixed.
Sometimes this problem can occur simply because you didn’t use the correct Project mode.
According to users, their Project mode was set to the Second screen only, and that caused the problem to appear. With this solution, the issue should be fixed.
Several users reported that Windows 10 can’t detect the second monitor on their laptops.
According to the users, this issue was caused by IDE ATA/ATAPI driver and in order to fix it, you need to remove the problematic driver.
We have already shown you how to uninstall a driver in Solution 3, so be sure to check it for detailed instructions.
After removing the problematic driver, restart your PC and your problem should be resolved.
This issue appeared on a HP Envy laptop but it can also appear on other laptops as well.
12. Adjust your resolution
Right-click your desktop and choose Display settings.
Locate the Resolution section and lower your resolution.
Keep lowering your resolution until the external display starts working.
Sometimes it’s necessary to adjust your resolution in order to fix your problem.
If your external display is using lower resolution than your PC, you might have to lower your resolution before you can use the second display.
If this solution works for you, you’ll have to readjust your resolution every time you want to use an external display.
13. Adjust Sleep Mode/close laptop lid
Press the Windows key + R, type control, and click OK.
Choose the Hardware and Sound option.
Select Power Options.
Click Change plan settings under the Selected plan.
Set all monitor-related settings to Never.
According to users, you can fix the problem with a second display simply by closing your laptop lid. As a result, your second display will become the main one and the issue will be resolved.
Keep in mind that this is just a workaround, so you’ll have to repeat it every time you want to use a second display.
Also, some users complained that their second monitor was not detected after waking up from Sleep mode. With the solution above, you should be able to prevent that.
14. Check if Extended desktop is enabled in AMD Control Center
Many AMD owners reported this problem on their PC. If Windows 10 can’t detect the second monitor, the cause might be AMD Control Center.
This software allows you to control various settings, but sometimes the Extended desktop feature might be disabled in Control Center.
To fix this problem, open AMD Control Center and navigate to the Displays Manager section.
From there make sure that the Extended desktop feature is enabled.
After enabling this feature, the problem should be resolved and both your displays should start working.
Keep in mind that this problem can also appear if you’re using an Nvidia graphics card.
If so, you’ll need to open Nvidia Control Panel and check if multiple displays are configured properly.
15. Update DisplayLink to the latest version
If you’re using DisplayLink to connect two monitors to your PC, you might experience this problem. To fix the issue, be sure that DisplayLink is updated to the latest version.
After updating DisplayLink, the problem should be completely resolved.
16. Enable Scale to the full panel size option
Open Catalyst Control Center.
Navigate to My Digital Flat Panels and selectProperties in the menu on the left.
Select your monitor and locate the Image scaling preferences section.
Select Maintain aspect ratio and click on Apply to save changes.
The problem should be resolved. Now you can use switch to Scale image to full panel size option if you want.
Users reported that using the Maintain aspect ratio option fixed the problem, so be sure to try it. After enabling this option, you’ll be able to switch to any other mode without issues and both monitors will keep working.
Why won’t my dual monitors extend?
The major reason your dual monitors are not extending is the wrong settings. If you have not enabled the Extend feature in the Project menu, your monitors might not extend.
Another reason for this issue is outdated drivers. We have shown how to do this in this guide.
Additionally, this guide may be useful if you’re wondering how to solve the unexpected resolution issue in Windows 10 and 11.
We hope that our complete guide helped you detect and set up your second monitor. For any suggestions, leave us a comment in the dedicated section below.
Your PC’s hard disk stores all of your relevant data, and any potential damage to the device has the potential of endangering your data, as well, unfortunately.
On the other hand, a hard disk has a limited lifespan, and it will eventually experience corruption sooner or later. Therefore, letting your data depend on it is not the best option we recommend.
If you are not aware of the condition of your hard drives, you may not be able to save your essential data before it’s too late.
You have to become conscious of the fact that not all hard drive crashes are random, and this is why you have to know when it’s time to back up your data before it fails beyond return.
You really have to make sure that all your essential information is backed up before anything nasty might happen to your hard disk.
A recommended solution is keeping tabs on your hard drive’s health so, in case something goes wrong, you will quickly be able to back things up.
Can you check the health of HDD?
Over time, your computer will become slower depending on how often you use it and what kinds of applications you install. After a clean installation of Windows, it may be challenging to get it back up and running in the same efficient manner in which it previously functioned.
In spite of this, you have the option of utilizing specialized hard drive software that will check the health of your HDD. Such as those listed below.
Additionally, not only HDD health check is essential for a well-functioning PC, but you should also use performance monitoring software to be conscious of the system components.
We gathered a list of the top 3 tools for checking your HDD’s health, as well, as they can best predict and protect from the unavoidable circumstances of a hard drive failure.
Industry-leading PRTG is a powerful and easy-to-use solution trusted by 200,000 users worldwide, especially if you are looking for a hard disk health check.
Highly versatile and complex, this tool has your back for every system you can think of, starting with devices, traffic, and apps. Plus, you can extend its benefits through the customizable HTTP API. Thus, it is another best HDD health check software.
PRTG monitors bandwidth, database, apps, cloud storage, all the way to servers, and the entire local network, including your workstations, routers, switches, servers, and printers.
Let’s quickly look at its key features:
Monitor bandwidth, database, apps, cloud computing services, servers, and LAN
Free download of the HDD health check software
SSH, SNMP, WMI, and Windows Performance Counters technologies
Real-time maps with live status (300 map objects: device and status icons, traffic charts, top lists, etc.)
Comprehensive dashboards and in-depth reporting
Flexible alerting that you can schedule
Native mechanisms for notifications (email, push, or HTTP requests)
Hard Disk Sentinel is one of the best SSD and HDD monitoring and analysis software that can monitor and diagnose hard disk drive problems and test and repair them.
The tool reports and displays SSD and HDD health and performance degradation so that you can take the appropriate action to avoid disk failure and data loss.
Compared to the traditional method of SMART checking, the Sentinel proves its value by being more sensitive to disk failures and displaying more relevant and detailed information about the problems found (if any).
Speaking about data loss, if you got to this post a moment too late and are already battling with HDD failure, don’t panic. We have the best recovery software for your HDD right here.
Let’s quickly look at its key features:
Comprehensive alerts and reports, ensuring maximum safety of your valuable data
Sophisticated detection algorithms
Inspect internal hard disks, external hard disks, SSDs, SSHDs, NAS drives, micro SD cards, and eMMC devices with one single software
Monitor status including health, temperature, disk transfer speed in real-time, and all S.M.A.R.T. values for all HDDs
Scheduled and automatic disk backup options to prevent data loss
It is a significant sign that the hard drive is failing if the name of a file or folder on that particular hard disk begins to get garbled or if you cannot open it.
In addition, any damaged data or data that has been removed are also indicators of the problem.
If you have any of these issues, it is a warning indication that your hard drive may not have much longer to live.
Solutions & alternatives for monitoring your hard drives
Here are your solutions and options for keeping an eye on your HDD’s health:
All last-gen drives come with a monitoring technology called S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology). This tool is targeted at continuously monitoring a certain number of parameters on a hard drive.
Various parameters can be efficiently monitored using S.M.A.R.T., including reading and write error rates, spin-up time, seek error rates, temperature, and more essential elements.
To warn you when some of these crucial parameters are degrading or reaching their threshold, you need a program that can track down all these changes and show them to you.
You must get the opportunity to test and see whether your hard drive can safely store your data, have enough time to back up essential files and start looking for a replacement if it becomes necessary for various reasons.
A monitoring program alone may not be fully capable of showing you whether the integrity of your files can be preserved on a particular hard drive.
It’s an excellent idea to scan for an unreadable or lousy block of data with available tools at least once a month to ensure that your drive is not degrading and your data is not being lost.
S.M.A.R.T. for checking your HDD’s health
S.M.A.R.T. is the embedded monitoring system implemented in most modern HDDs or SSD. Still, unfortunately, it will only let itself be known to users when imminent hardware failure is on its way.
All the leading HDD manufacturers recommend an occasional check of your disk status and running some surface tests and benchmarks.
Finally, you should know that your Windows PC also has a built-in tool that can be up for this job; however, if you want more advanced results, a third-party hard disk health checking tool will be your best bet.
You can choose any of the tools mentioned above or share other suggestions with us via the comments section below.
This tool is extremely efficient in maintaining your system healthy. You can run a bunch of scans to see how your hardware is doing, but also fix a lot of errors.
Talking about HDD, System Mechanic keeps it safe via its different tools and provides you with a maximum of information about it.
You don’t have to bother about taking any actions – the paid version not only scans and provides you information about the errors but also fixes them.
Iolo System Mechanic is one of the 7 software products included in the comprehensive security, privacy, and optimization package Phoenix 360, that offers hard disk health check and repair possibilities.
Let’s quickly look at its key features:
Detect startup apps and disable the ones you don’t really need (can improve the Windows boot time)
Perform quick or in-depth scans of your computer
Kill resource-draining background services and processes
Boost the performance and stability of your processor, memory, and hard disk
Clean up junk files and remove cache files that clutter your hard drive
Wipe chat and Internet history to protect your privacy
Defragment, optimize, and back up your system registry
Iolo System Mechanic
Iolo System Mechanic helps you optimize your PC, improve computer speed, and fix crashes.
Tom Clancy’s Rainbow Six Siege is a tactical player-verses-player shooter game. However, users have received the error code 6-0x00001000 when using the multiplayer matchmaking service in Rainbow Six Siege.
Rainbow Six Siege is available on PlayStation, PC, and Xbox consoles. The game follows an attack and defense model, allowing users to team up with friends to battle other players.
If you’re receiving the error code 6-0x00001000, follow the solutions below to solve this issue quickly.
How do I fix error 6-0x00001000 on Rainbow Six Siege?
1. Check the network connection
This may seem like a simple solution, but if your internet connection is weak or limited, then that is most likely why you’re receiving error code 6-0x00001000 in Rainbow Six Siege. Check your internet’s performance on another device to see if it’s unstable.
Users can also power cycle their router by turning it off and removing all cables. After holding the power button for about 10 seconds, users should wait around five minutes, then hook everything back up and power on the router.
2. Check server status
Open a browser, go to the Ubisoft official website, and search for Rainbow Six Siege in the menu bar.
Under Services, select Server Status.
Check if the servers are operational for your device.
If the servers are down for maintenance or issues, the status will be indicated on the server status page for Rainbow Six Siege. If everything is operational, then move on to the next solution to solve error code 6-0x00001000.
3. Clear DNS cache
Click on Start and search Command Prompt, then hit Enter.
Enter the following commands into Command Prompt, pressing Enterafter each entry, then exit:
Ipconfig/flushdns
Ipconfig/registerdns
Ipconfig/release
Ipconfig/renew
Clearing the DNS cache will remove any corruption that might be causing issues in Rainbow Six Siege. Doing this will not impact the performance of the game.
Click on Start and search for Control Panel then hit Enter.
Select Network and Internet then click on Network and Sharing Center.
Under View your active networks, click on the network you are currently connected to.
Click on Properties.
Locate Internet Protocol Version 4 (TCP/IPv4) and double-click on it.
Select Use the following DNS server addresses and enter 8.8.8.8 next to Preferred DNS server and 8.8.4.4beside Alternate DNS server.
Press OK.
Domain Name Systems (DNS) allow websites and programs to reach your computer via the Internet. If the DNS is unstable or not working, Rainbox Six Siege serves will not be available, leading to the error code and others like 3-0x000c0054.
5. Update network drivers
Click on Start and search Control Panelthen hit Enter.
Select Hardware and Sound, then click on Device Manager.
Open the dropdown menu next to Network adapters.
Locate your Wi-Fi driver and right-click on it and select Update driver.
Click Search automatically for drivers in the pop-up.
If your Wi-Fi drivers haven’t been updated in a while, then there is a chance that it is causing problems in Rainbow Six Siege. Check to see if the error code disappears after updating your internet driver.
Also note that users report encountering error code 6-0x00001000 when using the matchmaking feature for multiplayer games. The error means the matchmaking service timed out due to a poor connection.
The number one cause of this issue is a weak or unstable internet connection. Another common cause of errors in Rainbow Six Siege is that your game is out of date and needs to be updated. The server may also be undergoing maintenance at the time.
What are the most common Rainbow Six errors?
Some of the most common Rainbow Six errors occur due to poor server connection. This can happen if a weak network connection or servers are down. We have a guide if you’re experiencing connection errors in Rainbow Six Siege.
We hope one of the above solutions fixes error code 6-0x00001000 in Rainbow Six Siege. In the comments below, let us know which step worked for you or if you have a suggestion for another solution.
Is Paradox Launcher not working on your computer? If yes, we have the solutions to fix the most common PDX Launcher issues. This article will describe them one by one.
This game launcher is required to play some specific games from Paradox Interactive. It doesn’t matter from where you have purchased such titles; you will need PDX Launcher to run them. If you are interested, you can read the Paradox Launcher review.
The problem begins when you face issues while opening or using the Paradox Launcher. Don’t worry. After doing some analysis, we have found some of the most common problems with this application.
This article contains the most effective solutions for each of these problems.
Why is Paradox Launcher not working?
PDX Launcher may not work correctly for various reasons. It includes the following:
Active background process running a different version of this launcher: Such processes often conflict with the launcher, so check for these and terminate the process.
Third-party service or application: Some third-party programs are found to prevent the Paradox Launcher from running.
Firewall or antivirus program: Your third-party antivirus or firewall or firewall could be blocking the attempts by Paradox Launcher.
Corrupted components: If the relevant files required to run the installer or the ones that provide the optimal environment are missing, you may encounter issues running the Paradox launcher.
How do I fix Paradox Launcher when it’s not working?
1. Paradox Launcher V2 installer is no longer responding
1.1 Exit a background process
Press CTRL + Alt + Del on the keyboard and go to Task Manager.
Click on the Paradox Launcher process and then click on End task.
A restart is a good way to fix common issues on a computer. To do this, do not hesitate to follow the steps of method 1.2.
2.2 Install in clean boot mode
Open the Start Menu, type MSConfig and hit Enter.
Go to the Services tab.
Check Hide all Microsoft services and click on Disable all.
Click on Apply and OK.
Restart your computer.
Try to install the Paradox Launcher V2.
After installation, undo the changes you have made.
3. Paradox Launcher V2 not opening
3.1 Close any other active game/launcher
If you have games or other launchers running in the background, that may prevent Paradox Launcher from working properly. So, before opening this app, you should close any other game launchers and games.
3.2 End PDX Launcher-related background process
If there are existing background processes related to this launcher, you may have difficulties opening it. So, make sure no related services are actively running in the background.
To stop any services, follow the same steps as shown n method 1.1.
3.3 Uninstall any games that contain PDX Launcher built-in
Open any game launchers like Steam.
Right-click on the installed game and choose Uninstall.
If you have games on other platforms like Steam that have a PDX launcher built-in, keep in mind that that version of the launcher is different. However, if that has an active process in the background, the main PDX Launcher will show you various problems.
So, to fix Paradox Launcher not opening or working, you should uninstall these games.
If the PDX Launcher is no longer responding, you should restart your computer and see if it helps. Also, consider opening it in the clean boot mode as shown in method 2.2 If necessary, you also can re-install the game with the latest version.
Now, in the Games tab, you should see all the games. If not, there is something wrong.
If you don’t see your games on the PDX web, it may be because you are using a different account. Try to check it. You can contact the Paradox Launcher support team if it is the same account.
5.3 Wait
Sometimes, newly purchased games may not appear in both the launcher app and the web. You may need to wait for 24 hours if the server is busy. So, keep patience and see what happens.
6. Paradox Launcher can’t update
6.1 Restart the application
If update-related problems appear on PDX Launcher, the first thing is to close the launcher. Then, open it again. Then, try to update and see if it helps.
6.2 Disable Firewall
Open the Start Menu, search for Windows Security or Windows Defender Security and open it.
Go to Firewall & network protection tab.
Go to Private network.
Turn off the Firewall as shown in the screenshot.
Go back and do the same for the Public network as well.
6.3 Re-install with the latest version
Press Win + I to open the Windows Settings.
Go to Apps and click on Apps & features.
Search for the Paradox Launcher.
Click on the three vertical dots and then choose Uninstall.
Now, download and install the latest PDX Launcher as shown in method 1.3.
To uninstall Paradox Launcher completely and remove any leftovers, we suggest you useCCleaner. It can do even more things like fixing the registry, removing temporary files, and boosting PC performance.
7. Paradox Launcher freezing
7.1 Update
Open Paradox Launcher.
Go to Settings.
The update should start automatically.
After the process is done, click on Restart to finalize the update.
If you face a problem updating this app, you can follow the steps shown in method 2. Updating will fix any known bugs that will solve the freezing issue.
7.2 Try in clean boot mode
Often third-party services may interfere with the update process. So, trying to update in clean boot mode may help. For details, you can follow method 2.2
7.3 Re-install
If the problem persists, you can consider re-installing the launcher with the latest version.
8. Paradox Launcher update is being downloaded
This problem is similar to the problem mentioned in method 6. So, the steps shown in that method also apply to this problem. In addition, you can disable the Firewall.
9. Paradox launcher uncaught exception
If an uncaught exception occurs in Paradox Launcher, we suggest you re-install it with the latest version. However, make sure to uninstall any games installed with this launcher before proceeding.
How do I bypass Paradox Launcher?
If you want to play games on Steam or other platforms by not opening the Paradox Launcher, it is possible by following some technical steps.
To bypass Paradox Launcher, you need to follow specific steps for specific games. But, the first thing is to uninstall the PDX Launcher from your PC.
After that, you can browse the game folder, create a batch file, and input specific commands there. To such a file, you can create a new text file and change the file extension. For example, file.txt to file.bat.
The batch file name should match the game name for your convenience. This command may vary for different games. Usually, the command may be like the following:
game.bat %command%
You must replace the game.exe with the game file name like Cities.bat, Aftermath64.bat, etc.
Once you are done, you must integrate the batch file with Steam. The whole process may seem very complicated, but it’s not.
And, before you leave, check some quick tips and tricks to optimize Windows for gaming and get the best experience.
If you have any opinions, let us know in the comment box.
You have found this article because Silhouette Studio is not responding. Sadly, you are not alone, as many users have reported that Silhouette Studio keeps freezing when they try to work with this software.
This issue can prevent you from fully accessing your projects and stop you from creating new ones. This can be highly frustrating, especially if you are pressured by a deadline.
For the reasons mentioned above, in this article, we will explore some of the best troubleshooting methods to deal with Silhouette Studio freezing while in use.
Additionally, the solutions below will help if Silhouette Studio keeps crashing in Windows 10 or 11, so read on.
Why does Silhouette Studio keep not responding?
Like any other app, Silhouette Studio can suffer from varying problems. A few triggers for Silhouette Studio not responding are incomplete installation, missing files, and compatibility issues.
There can also be the case of file corruption or simply that it wasn’t updated to the latest version for some reason.
Luckily, our guide below will tackle all the possible causes and provide you with the proper solutions to fix them.
If you face the error message Silhouette Studio has encountered an error and must quit, Silhouette Studio is stuck on processing, Silhouette Studio 4.4 problems, or Silhouette Studio crashing on startup; you will find these solutions helpful.
Please follow the steps presented in this article in the order that they were written to avoid any unnecessary complications.
How do I fix Silhouette Studio not responding?
1. Run Silhouette Studio in Compatibility mode
Right-click on the Silhouette icon on your desktop and select Properties.
Inside the properties window, click on the Compatibility tab.
Select the box for the Run this program in compatibility mode for and click on Windows 7 from the drop-down menu.
Click Apply and try rerunning Silhouette.
If Silhouette Studio is not working on Windows 10, running it in Compatibility mode should do the trick and make the app run again.
This solution can also be helpful if Silhouette Studio is running slow, although there are many other possible causes for that problem.
2. Update to the latest version of Silhouette Studio
Run and follow the on-screen instructions to install the software on your PC.
Run Silhouette and see if the app keeps freezing.
Normally, Silhouette Studio should automatically download new updates, so you don’t need to do this manually, as we explained above.
However, this solution will work even if it doesn’t do that.
3. Clear Silhouette Studio preferences
Make sure that Silhouette Studio is closed.
Press the Windows + R keys on your keyboard.
In the Run window, type in %appdata% and press Enter or click OK.
Search for the folder named com.aspexsoftware.Silhouette_Studio, and delete it, including all subfolders.
Empty Recycle Bin.
Try to see if the issue persists by opening Silhouette Studio again.
This solution is also great if Silhouette Studio won’t open, so follow the easy steps above to finish it in no time.
4. Restore your Silhouette Studio to factory settings
NOTE
Note: Please make sure to back up your library and files to an external drive before attempting this, as this option will delete all the data you stored.
Open Silhouette Studio.
Inside the Edit menu, select Preferences.
In the options window, select Advanced.
Click on the Restore Factory Defaults button and confirm your choice.
Check to see if the issue persists after this process is completed.
Why won’t my Silhouette studio open on my computer?
If you can not get the program to open on your computer, the Program file may be corrupted. You may have to get a fresh copy and reinstall it. Alternatively, you may run an SFC scan on the command prompt.
Also, you may have too many programs already running on your computer. This will make your computer very slow or responsive. It would help if you waited for it to start responding; then, you must shut down some programs or force-end them from the Task Manager.
Furthermore, there are situations when a program won’t launch because a previous instance is still active and improperly exited in the background.
How to fix Silhouette Studio issues on Windows 11?
Luckily, all the solutions we applied for Windows 10 above will also work on the new OS. Therefore, the software looks the same, and you will find that the menus are identical.
The only differences will appear in the design of the windows but not in their placement or location so that you will find them easily.
The only notable distinction is the File Explorer, which you will need to use in Solution 3 from this guide, and it looks a bit different.
How to set up the auto-update option in Silhouette Studio?
Click on Edit from the top menu and select Preferences.
Navigate to the Updates tab.
Click on the Check for Updates tab and set it to Daily from the list of options.
Now hit the Apply and OK buttons to confirm the setting.
If the update recurrence was set to Never, that most likely means you are running an old version that obviously can cause all sorts of issues.
As we’ve mentioned, the app has a built-in auto-update feature, but if that is not working, you may be stuck with an old version that can cause problems.
That’s why we need to ensure that the function works correctly, and we’ve shown you how to do that.
This article explored some of the best troubleshooting methods for dealing with Silhouette Studio not responding. Furthermore, the solutions should work for freezing, crashing, and not opening issues.
We hope our solutions helped you fix the app, and now you are running it on Windows 10 or Windows 11 seamlessly.
Also, we hope you follow the guide from the first solution since we have prepared them according to what should be most effective.
Lastly, please let us know if this guide worked for you by using the comment section found below this article.
Our friends over at Cloud Wars recently posted an interesting prediction about Microsoft’s cloud growth in 2022 with the belief it could “top $100 billion,” by the end of the year.
During its earnings call last quarter, Microsoft missed its own lofty projections of revenue growth by a hair, and while most investors still seemed relatively pleased with the net results, other bullish ones were quick to point out the slowing growth the company’s cloud division was experiencing year over year.
The cloud services market hasn’t reached saturation just yet, but competition is calcifying among a handful of known players that includes AWS, Google, Microsoft, Oracle, and IBM, and the range between unincumbered competitor growth is shrinking.
The folks over at Cloud Wars monitor the minutia of the cloud industry and believe that Microsoft could finish the calendar year of 2022 with a 25% larger cloud business than its next closest rival Amazon.
Before the pedantic crowd starts crowing, Amazon is still the largest cloud services provider in the sector. Author Bob Evans, is distinguishing the company’s predicted growth between calendar year and fiscal year for Microsoft which normally runs from July 1 and ends June 30.
Evans lays out a simple and feasible plan that could lead Microsoft to a $100 billion plus year with the following:
For the quarter ended March 31 (Microsoft’s FY22 Q3), its cloud revenue was $23.4 billion, up 32%; and
For the quarter ended June 30 (FY22 Q4), cloud revenue was $25 billion, up 28%.
That adds up to $48.4 billion for the first half of calendar 2022, meaning Microsoft has to generate second-half cloud revenue of $51.6 billion to reach $100 billion for the year. That’s an average of $25.8 billion per quarter. While it would be foolish to say that achieving such volume is in the bag, I do not recall Microsoft’s cloud revenue going down in sequential quarters for the past handful of years. So, the fact that Microsoft hit $25 billion in the second calendar quarter means it has a very good chance of bumping that up to at least $25.8 billion in each of the next two quarters.
As mentioned, Cloud Wars does keep a meticulous eye on the cloud sector and Evans backs up his claims with additional details outlined in seven primary factors that have already leading to revenue growth by Microsoft’s cloud services that include an expanding product line, aggressive end-to-end security solutions, commitments to low-code/no-code developer tools, existing and future multi-year and multi-billion dollar contracts and growing collaborative and customer-centric ethos at the company.
There is still plenty of room for cloud services growth in the general market, but with its relatively late start, the revenue gains Microsoft continues to clock quarter over quarter is still fairly impressive and bodes well for the company’s diversified product portfolio.
Many reported that the Kindle PC app is not syncing for them, and that can be a problem since you won’t be able to access your books or continue where you left off.
Luckily, a couple of solutions might be able to help you with this problem, so be sure to keep reading.
Why is my Kindle not syncing with my computer?
Firstly, Kindle can’t sync books that aren’t purchased from Amazon, so if you try to do that, the sync feature won’t work. Also, you can sync collections that you made on your PC.
Other issues can be related to temporary glitches with the sync feature.
What can I do if the Kindle PC app is not syncing?
1. Sync manually
Close the book that you’re reading.
Next, click on Sync. Do that while on Wi-Fi.
Switch to the device that you want to sync to and make sure you’re connected to Wi-Fi.
Tap on Sync.
Open the book and you should be able to continue where you left off.
Sometimes you will have to use Sync feature several times in order for it to work properly.
Open the Kindle app and select Tools located at the top of the bar.
Select Manage Your Content and Devices in the context menu that appears.
Sign into your Amazon account if asked on the web browser.
Select Preferences at the top bar.
Scroll down until you see Device Synchronization (Whispersync Settings).
Click the arrow on the far right side.
You will a button for Whispersync Device Synchronization. Turn the feature on if it was off.
Close the browser and return to the Kindle app. It should be synchronized at this point.
Why is my Kindle app not syncing to the furthest page read?
There are several reasons for this, most likely temporary sync glitches. If Whispersync isn’t enabled, you can also experience this issue.
If the Kindle PC app is not syncing, ensure you’re trying to sync only content you’ve bought from Amazon. Also, don’t forget that collections can’t be synced. In most cases, these problems can be fixed with manual sync.
Feel free to leave a comment below if you have any questions regarding the above process. Also, do not hesitate to comment about guides you’d like to see or information about any other app on whichever platform.
An eSIM allows you to connect to the internet using a cellular data connection. An eSIM profile is the software you must download to your device to access the carrier’s mobile network.
In this guide, we will show you how to check if you Windows PC has an eSIM in it to use to connect to the internet when the Wi-Fi is poor.
Does my device have eSIM support?
If you want to see if your device has eSIM, here’s what you need to do.
1. Open Settings
2. Go to Network & internet > Cellular
3a. On Windows 10 (Version 1703 or later): Under Cellular, if you see a Manage eSIM profiles setting, then your PC has an eSIM.
3b. On Windows 11: Under Cellular, look for the Use this SIM for cellular data with a dropdown menu. Click the dropdown menu to see if an eSIM is an option; eSIM may also be labeled as SIM 1 or SIM 2.
Some people may be wondering if their device has eSIM support on their device, but you can also check cellular settings in Windows. Another clear indication that your device doesn’t have eSIM support is that you don’t even have a “Cellular” option available in Settings.
Remote Assistance for Windows is a feature that enables users to request assistance from other users when they’re having trouble with their computers.
It can help fix problems or assist when a user needs to perform a task on another computer. On the recipient’s side, they only need to accept your help. Remote assistance is enabled by default, but it’s easy to turn off if you don’t need it.
Quick Assist and Remote Assistance are similar Windows features that can help you troubleshoot a PC or get support from someone else. They all use the RDP protocol so it would help if you enable Remote Desktop.
How do I send a remote assistance invitation in Windows 11?
You can send an invitation to someone you want to help you with your computer. They will receive a link that allows them to connect via the Remote Assistance tool.
To do so, follow the steps below:
Hit the Windows + R keys simultaneously to open the Run command.
Type in msra in the dialog box and press Enter.
Select Invite someone you trust to help you.
Click on Use e-mail to send an invitation.
The other party will receive an email invitation to join.
How do I enable or disable Windows Remote Assistance?
1. Enable or disable Windows Remote Assistance via Run
The first recommended method to try out if you want to manage Windows Remote Assistance is to access it through the Run feature. It is built-in on your Windows device and safe to use.rnrnThrough a simple command inserted in the Run dialog, you can allow or prevent Remote Assistance connections to your PC.
1. Hit theu003cspanu003e u003c/spanu003eu003ckbdu003eWindowsu003c/kbdu003eu003cspanu003e u003c/spanu003e+u003cspanu003e u003c/spanu003eu003ckbdu003eRu003c/kbdu003eu003cspanu003e u003c/spanu003ekeys simultaneously to open theu003cspanu003e u003c/spanu003eu003cstrongu003eRunu003c/strongu003eu003cspanu003e u003c/spanu003ecommand.
2. u003cspanu003eType u003c/spanu003eu003cemu003eSystemPropertiesAdvancedu003c/emu003eu003cspanu003e in the dialog box then press u003c/spanu003eu003ckbdu003eEnteru003c/kbdu003eu003cspanu003e or click on u003cstrongu003eOKu003c/strongu003e.u003c/spanu003e
3. u003cspanu003eNavigate to the u003c/spanu003eu003cstrongu003eRemoteu003cspanu003e u003c/spanu003eu003c/strongu003eu003cspanu003etab.u003c/spanu003e
4. u003cspanu003eUnder u003c/spanu003eu003cemu003eRemote Assistanceu003c/emu003eu003cspanu003e, you can choose whether you want to enable or disable this feature on your Windows PC.u003c/spanu003ernrnu003cspanu003eCheck u003c/spanu003eu003cstrongu003eAllow Remote Assistance Connections to this computeru003c/strongu003eu003cspanu003e to enable the setting.u003c/spanu003e
5. Uu003cspanu003encheck it to disable Remote Assistance.u003c/spanu003e
6. u003cspanu003eAfter you make your selection, pressu003c/spanu003eu003cemu003eu003cspanu003e u003c/spanu003eApplyu003c/emu003eu003cspanu003e and u003c/spanu003eu003cstrongu003eOKu003c/strongu003eu003cspanu003e to save the changes.u003c/spanu003e
2. Use Control Panel to manage Remote Assistance settings
Hit the Windows key, type in Control Panel in the search bar and click Open.
Navigate to System and Security.
Click on Allow remote access.
Navigate to the Remote tab.
Under Remote Assistance, check Allow Remote Assistance Connections to this computer to enable and uncheck to disable then press Apply and OK to save changes.
3. Tweak the Registry to allow or prevent Remote Assistance connections
Hit the Windows + R keys simultaneously to open the Run command.
Type regedit in the dialog box then hit Enter.
Navigate to the following location: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlRemote Assistance
Double click on fAllowToGetHelp to edit the DWORD and change its Value Data to 1 to enable and 0 to disable.
What is the difference between Remote Assistance and Remote Desktop?
Remote assistance is a feature that allows you to share your screen with another person so they can assist you in troubleshooting a problem. It is a feature included in Windows that allows another user to view your screen and control your mouse and keyboard.
Windows 11 Remote Assistance uses the Remote Desktop Protocol (RDP) to connect to the remote computer. This feature can be useful when troubleshooting problems with your PC or helping users navigate around Windows.
Remote Desktop is another technology that allows you to connect to a computer remotely. However, with Remote Desktop, you have complete access to the remote system, including full access to all files and programs on that system.
Windows 11 has a built-in Remote Desktop, but if you prefer more features and functionality, you can install Remote Desktop software.
Remember, when using RDP connections, your IP address is exposed to cyber criminals, and your system could be vulnerable to attacks if you have a weak password. It is essential to use a VPN with Remote Desktop to secure your connection and mask your identity.
You will also need an efficient antivirus program if you frequently use Remote Desktop and Remote Assistance.
If you need a simpler tool, we have a guide on how to download Quick Assist, so don’t hesitate to use it. Keep in mind that Quick Assist is not working properly for some users, but we have a guide that can help you address that.
Let us know your experience with Remote Assistance if you have used it in the comment section below.
Some of our readers told us that their all-in-one Canon printers don’t scan after they upgrade to Windows 10.
One of the readers said that when he accesses the scan preview, it works fine, but when he clicks the Scan button, the scanner gets to 28% of the process and stops.
If your Canon printer & scanner don’t scan after upgrading to Windows 10, these resolutions might fix it.
If you’ve never done any scanning with the Canon scanner in Windows 10 before, check the printer’s compatibility with the platform.
You can check Windows 10 compatibility for a range of Canon printers and scanners on this page. There you can click your printer’s series to expand its list of models as in the snapshot directly below.
Note that the model lists include Windows 10 and Windows 10 S columns. Canon printer models are generally compatible with Windows 10 but not Windows 10 S.
Thus, some Windows 10 S users might need to switch to an alternative Windows 10 edition to scan with Canon printers.
2. Use the Printer troubleshooter
Click the Start button type troubleshooter and click on Troubleshoot settings.
Now, select Aditional troubleshooters.
Select Printer and click on Run the troubleshooter.
Follow the instructions on the screen to fix any printer and scanner issues.
Windows includes the Printer troubleshooter that might fix an all-in-one Canon printer that isn’t scanning.
3. Update the printer driver
Canon users have also confirmed that driver updates for their devices fixed mid-scan hangs. So, updating the driver for your Canon printer/scanner might also get it scanning.
You can also quickly update drivers with the Canon Drivers Update utility. Click Download on this webpage and open the utility’s installer to add the software to Windows.
Then open the utility’s window and press the Start Scan button. The utility will list outdated Cannon drivers and the most updated ones, which you can then install by clicking Install.
Tip
You can also choose and use an automatic solution. This can ease and finish the process successfully. Outbyte Driver Updater is a specialized tool that scans your PC and provides you with a thorough report of your drivers. After that, it offers the latest updates for your drivers and keeps them updated constantly. ⇒ Get Outbyte Driver Updater
4. Select the Power Saver option
Enter power saver in the Windows Search box and select Choose a power plan.
Then you can select the Power saver option. Alternatively, you might also find the printer scans when you unplug your laptop.
Some users (with laptops) have fixed Canon printers that hang when scanning by selecting the Power saver option in Windows 10.
Download Canon MF Toolbox 4.9, unarchive it, and double-click its executable file to install.
After finishing the installation, right-click its exe file or desktop shortcut and select Properties to open the window shown directly below.
Select the Compatibility tab, then slick the Run this program in compatibility mode for check box.
Select Windows 8 from the platform drop-down menu.
Press the Apply button to confirm the new settings, and then click OK to close the window.
Then open the MF Toolbox toolbar and click Scan-1 to scan.
The MF Toolbox 4.9 is a Canon alternative to the Windows Fax and Scan utility.
Some Canon printer users have stated in forums that their printers scanned when they utilized MF Toolbox 4.9 instead of Windows Fax and Scan.
So, that’s how you can fix an all-in-one Canon printer that doesn’t scan. Canon PIXMA MP160 users can also check this article for further scanner fixes.
We also do recommend trying some manipulation to be sure the problem is fixed. You can also try to use scanner software in order to maximize the tests.
Don’t hesitate to use the comments section below for any questions or other suggestions to fix the problem.
Launchers essentially let you change how Android feels on the phone without needing to root or go through complex settings. Today we take a closer look at Microsoft Launcher, focused on productivity and integration with their other products.
Get Started with Microsoft Launcher
Immediately after installing Microsoft Launcher, the wallpaper menu greets us. You can either keep it default or go with the Bing wallpapers. Select the latter and get new wallpapers delivered daily to your phone.
Afterward comes the login through a Microsoft account, which is optional but would be good to sync every service. Sign in and synchronize calendars, sticky notes, etc., across all your Microsoft-based devices, primarily focusing on Windows.
What stands outs
Let us shed some light on a few of the Microsoft launcher’s features that stand out.
Universal Search
Swipe down, and the search bar appears along with the keyboard on the screen. You will find this feature on Xiaomi’s MIUI and some iterations of the ColorOS by Oppo. It lets you use the smartphone with a single hand.
This comes in handy when phone displays keep getting bigger and becoming difficult to use with one hand. The search is faster than the Google search widget on our tested phones.
The search displays result from web search, apps, settings, sticky notes, contacts, calendar, launcher, and system settings. Toggle the filters to show results from specific categories. Like Google lens, you can search for objects through the photo search button powered by Bing.
Tap on web results, and it will search in the preferred browser through the selected search engine. It is set to Bing by default but can be changed to one of the dozen options and includes Google, Baidu, DuckDuckGo, etc.
Productivity Panel
Microsoft offers a customized feed when you swipe right from the left side of the screen. It houses glance with customizable panels and a personalized news feed. The Glance feed contains sticky notes, calendars, to-do lists, documents from OneDrive, and the most used apps.
Sticky notes have seamless synchronization across all Microsoft devices. Jot down something important on your Windows PC, and later go out, access it by swiping right on the phone’s home screen.
You can shuffle between calendars from Google, Outlook, Microsoft 365, and the phone’s default variant. Make sure to select the correct email account for adding an event, reminder, or task to the calendar.
The screen time app in the panel stands out. It takes data directly from Digital Wellbeing and briefly shows all the stats on the panel. Tap to find more information, such as average time between screen unlock, daily usage pattern, and other stats. Screen time has a widget that you can anywhere on the home screen.
Pin Searches
Do you frequent search engines to search for particular things? It can be upcoming dates for an event, the status of a flight booked last month, or anything found only through an internet search.
Pin these frequent search terms to the launcher box and tap them to perform the search in the preferred browser. Tap on the upward arrow to turn on search engine suggestions and select one to open them in the browser.
One Tap Wallpaper Change
Looking at the same wallpaper every day becomes monotonous and boring. We change them through settings or via a third-party app. Do one better through a single tap on the launcher’s widget button and change it instantly.
All the wallpapers are sourced from Bing’s endless photos library, and you can select from the set of a dozen, refreshed daily. It changes both the home screen and lock screen simultaneously.
What could be better
Everything looks good but there is always room for improvement. Here is how Microsoft launcher can get even better.
Pinned Apps
The frequently used app is a good touch but sometimes feels inadequate. There are a few apps, such as authenticator, and password managers, while essential but used occasionally. Just like searches, the launcher could use pinned apps as the home screen gets crowded over time.
Dark mode can be improved
We tried the launcher on three phones, one budget, one mid-range, and a flagship. Two of them had text visibility issues in dark mode, which could be solved by tweaking. Dark mode users are growing, and Microsoft should address this minor issue as a priority.
Earlier this year, during Microsoft Inspire 2022, Microsoft launched Excel Live, a feature that lets Microsoft Teams meeting attendees collaborate on Excel workbooks in real time. With this feature in place, the user will no longer need to share their screen during meetings which at times disrupts the orientation.
With Excel Live now generally available, Teams users will now be able to collaborate on Excel files directly within the meeting window as it supports Sheet Views. “The workbook loads for each participant at the optimized zoom level with flexibility to adjust zoom based on their preferences”.
However, Excel Live comes with three known limitations. First up, the feature can only be used in meetings with up to 25 attendees and they must all come from the same organization. Secondly, recordings can only be made in audio format, you cannot make Excel Live meeting video recordings. And finally, Web support to start sharing will work only in Public Preview, it will not be available for general release.
To access the feature, launch Microsoft Teams and join the meeting, select the Share option, then head on over to the Excel Live section. From this point, select the spreadsheet you want to share with meeting attendees. And finally, click on the Share button to share the spreadsheet. You will however need to have full sharing permissions.
During Inspire 2022, Microsoft Viva expanded with a new Engage module designed to build community and connections. The module also featured Storyline and Stories, both integral parts of the platform, in place to help users express themselves and inform people more about themselves.
Microsoft has announced that the Storyline feature is now widely available across Teams, Outlook, Yammer, and Microsoft Viva. With this feature, communication is enhanced across your organization, in that both employers and employees get to share real-time updates and experiences.
To access the feature, admins will have to enable it by choosing the Manage storyline option either on Yammer.com or the Viva Engage app. Then, internal users will gain access to the feature, allowing them to see, react, and respond to others’ storyline posts. However, guest users will not have access to Storyline. As for the Stories feature, it is also set to reach public preview soon.
In this guide we’ll show you the best Ethernet settings so you no longer have to deal with constant lagging when you play games online. Even if you don’t have the best gaming PC or the fastest network, you can optimize what you have.
How do I optimize my Ethernet settings for gaming?
1. Disable IPv6
Right-click on the network icon on your taskbar.
Select Open Network & Internet settings.
Click on Change adapter options under the Advanced network settings section.
Right-click on your Ethernet connection and select Properties.
Unmark the Internet Protocol Version 6 (TCP/IPv6) option.
Hit the OK button.
Disabling IPv6 is one of the best Ethernet adapter network settings for optimizing your gaming performance to the maximum on Windows 10/11. With this feature disabled, you should notice improved performance.
2. Disable Ethernet adapter components
Right-click on the network connection icon on your taskbar.
Click on the Open Network & Internet Settings button.
Select Change adapter options.
Right-click on the connection you want to modify.
Select Properties from the context menu.
Click on the Configure button.
Switch to the Advanced tab.
Find and click on Interrupt Moderation from the list here.
Disable the selected option from the dropdown under Value on the right-hand side of the screen.
Repeat steps 8 and 9 for the following options:
Flow Control.
Receive Side Scaling.
TCP Checksum Offload (IPv4).
UDP Checksum Offload (IPv4).
3. Ethernet advanced settings gaming optimization
Press the Windows key + R and type devmgmt.msc in the run box.
Click the OK button to open Device Manager.
Double-click the Network adapters option to expand it.
Right-click on your network adapter and select Properties.
Switch to the Advanced tab.
Select the ARP offload for WoWLAN option.
Now, click the dropdown under Value and select Disabled.
Select the properties below and disable them too:
NS offload for WoWLAN.
Interrupt Moderation.
Flow Control.
Receive Side Scaling.
Adaptive Inter-Frame Spacing.
Enable PME.
Packet Priority & VLAN.
Jumbo Packet.
In addition to these settings, you can also ensure that your PC isn’t running on Power Saving mode. You want to use all your resources for the game.
4. Disable power saving for the network adapter
Click the Windows key + X and select Device Manager.
Double-click the Network adapters option to expand it.
Right-click on your Ethernet adapter and select Properties.
Click the Power Management tab.
Uncheck the Allow the computer to turn off this device to save power option.
Click on the OK button.
The power management settings help to save energy on your PC. However, it can cause your game to slow down by turning off your driver when it needs to save power. Disabling this feature allows your network drivers to work constantly.
Sometimes the network drivers can cause issues with your Ethernet connection. You can keep them in check with the help of specialized driver updaters.
Should I disable Energy Efficient Ethernet for gaming?
Energy Efficient Ethernet reduces the power consumption of some components in times of low link utilization. This helps to save energy on your PC.
However, this affects your gaming as the primary aim is to save energy. So, you should disable this setting to optimize gaming.
Wrapping up
These are the best Ethernet settings for gaming and improving your network throughput. However, ensure that your network drivers are updated. Running outdated network drivers will take a toll on your gaming performance.
We also have a complete guide on how to set up your PC for gaming with more settings to speed up your computer.
If you’ve followed all of the steps in this guide but still experience lagging when you game, disable your antivirus.
Feel free to let us know if the tips above helped optimize your gaming in the comments below.
FAQs
How do I make my Ethernet faster for gaming?
Disable energy-saving and offloading features, switch to 1.0 Gbps full duplex, and use a low-latency DNS.
What are the best Ethernet adapter settings for gaming on Realtek?
Turn off Interrupt Moderation, Large Send Offload, and Green Ethernet. Set Speed & Duplex to 1 Gbps Full Duplex.
Is Ethernet better than Wi-Fi for gaming?
Yes. Ethernet provides lower latency, less packet loss, and more consistent speeds, especially during online gaming.
What Ethernet speed is ideal for gaming?
1 Gbps is more than enough. Prioritize low ping and stable latency, not just download speed.
If you’re looking for a way to add some personality and flair to your PC setup, RGB lighting can go a long way. To unlock the potential of your hardware, you need good tools to sync lights. Whether you’re on Windows 10 or Windows 11, choosing the best RGB software can make all the difference.
With so many options available, from RGB software for Gigabyte to the best universal RGB software, finding one that fits your setup can feel overwhelming.
But here ends your search because we looked into it and found the best options.
What is the best RBG software to control PC lighting?
With Corsair iCUE, you can regulate fan speed, keyboard key function, mouse DPI settings, and lighting.
There are numerous preset lighting effects by default. You may also set complex keys, manage key mapping, and create profiles for particular programs. You can handle all Corsair items from this program.
The primary disadvantage is that this software can only control Corsair devices such as Corsair keyboards. Besides this, it’s a fantastic app to use.
OpenRGB is compatible with all RGB devices because it is independent of the manufacturer’s software.
Your RGB can all be controlled by third-party software thanks to OpenRGB’s network-based Software Development Kit.
This makes it possible to integrate games, visualize the music, change the lighting, and do anything else you can think of. The wide functionality of OpenRGB is one of its benefits.
3. Signal RGB – Best for immersion by synchronizing
SignalRGB supports numerous games, creating a more immersive experience. This includes Forza Horizon 5, Halo, and Apex Legends.
It is available in two versions from WhirlwindFX. The free version offers complete hardware compatibility, lighting effects, and mouse CPI control.
SignalRGB is meant to allow adding lighting effects to supported hardware straightforwardly. So, open the app, find a pleasing effect, install it, and use it with your compatible hardware. It’s that simple!
JackNet RGB is a free app that’s great for managing all of the RGB devices in one location. It can identify every RGB component, which is more practical for users.
This program is simple to install, and its streamlined user interface makes it easy to handle any RGB device. It allows you to apply numerous RGB effects and synchronize them with various devices.
Additionally, you can give effects to specific components. To utilize this app, you must install and launch the manufacturer’s software.
The company’s mice, keyboards, headphones, laptops, mousepads, microphones, speakers, and external GPU enclosures come in Razer Chroma. Additionally, certain non-Razer peripherals have it.
The range of colors supported by Razer Chroma is up to 16.8 million, making it one of the best PC lighting software.
This has a more striking sound, but it has about the same number of colors as RGB lighting environments.
HyperX’s RGB lighting system is named NGenuity, one of the best PC lighting software. On HyperX mice, keyboards, headphones, and memory modules, you can get NGenuity.
Although it has been more popular recently, HyperX’s lighting technology isn’t as prevalent because it competes in fewer categories than well-known brands like Razer or SteelSeries.
A spectrum of up to 16.8 million colors is supported by the HyperX NGenuity lighting system, which puts it roughly on par with most of the competition.
It also supports game profiles, macros, per-key customization, and lighting preset sharing.
The RGB lighting system used by Logitech G is known as Lightsync and can be used on Logitech G mice, keyboards, headphones, and speakers. Logitech G Lightsync provides a spectrum of up to 16.8 million colors.
It enables sharing your lighting settings, per-game profiles, macros, and per-key customization just like NGeunity does. It is both affordable and comfortable to use.
From RGB software that controls everything to more focused solutions like addressable RGB software and RGB fan control software for PC, there’s something here for every kind of build. Prefer open tools? We’ve also included the best open source RGB control software to give you full flexibility.
Have you tried any of these? If not, feel free to try one of them, and then let us know about your experience in the comments section below.
The Amazon Kindle app for PC is a great way to read your favorite digital books. You have access to a massive library that houses every kind of genre imaginable.
And as with any desktop app, there will be a software update every now and again which tends to happen automatically. But sometimes the update doesn’t download automatically and you’ll have to do it manually.
This guide will show you how to update the Kindle app on both Windows 10 and Windows 11.
Is Kindle for PC no longer available?
Actually, there is a Kindle app available for PC and Mac computers. This question refers to the old Kindle app that was discontinued back in October 2016.
Amazon got rid of the old app and replaced it with the current version. It’s also possible that people may be thinking of the Kindle on Windows 7. On that particular OS, Kindle is no longer receiving official support.
Instead, Amazon is focusing its resources on the Windows 10 and 11 versions of Kindle which will be covered here in this guide. The process is the same on both operating systems, although the windows may look slightly different.
How do I update the Kindle app on Windows?
Most of the time, the Kindle app for PC will update automatically. But in case there was some error or you simply want to do it manually, you can accomplish this via the official Kindle website.
What you need to do is download the latest version from the website. This ensures that your Kindle app is completely safe and secure, and will run the best it can with the latest updates.
Can you read Kindle books on a PC without the app?
Yes, you can read books with Kindle Cloud Reader, and you can also follow this step by step guide to read Kindle on PC for offline access and customization.
All you have to do is go to the Kindle Cloud Reader website, sign in with your Amazon account, and you’re ready to read.
Feel free to leave a comment below if you have any questions regarding the above process. Also, do not hesitate to comment about guides you’d like to see or information about any other app on whichever platform.
![How to Reduce Windows 11 High RAM Usage [6 Ways]](https://windowsreport.com/wp-content/uploads/2021/09/ram-w11.png)
![6 Ways to Fix Steam Access Denied Error [In-Depth Guide]](https://windowsreport.com/wp-content/uploads/2022/02/steam-denied.png)
