How to Download the Outlook Address Book for Offline Use

The offline address book (OAB) feature allows a centralized repository for storing contact information on Outlook. Recently, we have received complaints regarding users not knowing how to download the Outlook Address book for offline use.

Consequently, you may be unable to access and save the content of the address book on your device. Hence, we will provide detailed steps discussing how to work around its download and where you can find it.

Why is Outlook not downloading the address book?

The following factors can cause this problem:

  • Issues with network connection, like poor or unstable network connection and network congestion on your PC, can prevent you from downloading it.
  • Outlook server outage or downtime can cause the computer not to connect with the host, restricting download.
  • Outlook email account setup can cause issues when downloading the address book.
  • Outlook downloading can timeout or fail if a sizable address book takes longer than expected.
  • Issues with the cache mode used by the Outlook offline address book can prevent it from downloading.
  • Misconfigured synchronization settings in Outlook might result in updating or downloading issues.
  • A damaged Outlook profile can hinder its ability to download.

The above-stated causes are random factors affecting downloads on your computer.

How do I download the address book from Outlook?

Via Account Settings

  1. Open Outlook on your PC, click File on the ribbon, and select Account Settings.
  2. Click on Download Address Book.
  3. In the pop-up dialog box, Click the Download changes since last Send/Receive box to check if not checked by default.
  4. Click the Choose address book drop-down arrow button and select the appropriate OAB you want to download.
  5. Click on OK and wait for it to download.

The procedure above will aid you to download an offline address book on your computer. Note that unchecking the Download changes since the last Send/Receive box will download the offline address book.

If you’re using iCloud, you can always seamlessly sync iCloud with Outlook.

Where can I find an Outlook address book?

You can find the Outlook offline address book in the following directory on your PC in File Explorer: C:\Users\%username%\AppData\Local\Microsoft\Outlook\Offline Address Books\

In conclusion, check our guide about ways to fix Outlook couldn’t set up your account on your PC. Also, feel free to read about how to fix Outlook PST cannot be found on Windows.

Feel free to leave your suggestions and questions in the comments section.

Outlook Calendar not Showing Holidays? Here’s How to Fix it

There is a high chance of missing out on essential plans when the Outlook calendar is not showing holidays or notifying you about them. This problem might affect your plans if you highly depend on this feature for work.

However, you have to understand the severity of the problem by finding the cause and making a way around it. Hence, this article will provide the steps for fixing the calendar not displaying holidays in Outlook.

Why are the holidays not showing in Outlook?

  • Problems with syncing Outlook calendars across devices or platforms might prevent holidays from appearing.
  • Outlook may not display holidays for your specific country by default, causing it to be unavailable in your calendar settings.
  • Outdated Outlook software versions or missing updates might be responsible for the calendar not displaying holiday issues.
  • If the holiday calendar subscription is not active, holidays won’t appear.
  • Incorrect time and date can also cause issues with the Outlook calendar.
  • Sometimes, if you’ve customized your calendar settings to exclude holidays, they won’t appear and seem missing.
  • Recent alterations or changes to the Outlook app may hinder the calendar from displaying holidays.
  • Issues with Outlook data, installation files, or compatibility problems might cause the calendar to malfunction or not show updates about upcoming holidays.

Regardless, you can resolve the problem by following the steps in the next section.

How can I get my calendar to show holidays on Outlook?

Before anything, apply the following:

  • Close and reopen the Outlook client or restart your computer to refresh the app calendar data.
  • Verify that your Outlook Calendar is properly synced across all your devices.
  • Ensure you’ve selected the correct country in your calendar settings to display holidays relevant to your location.
  • If you’re using third-party calendar apps or plugins, try disabling them temporarily to check if they’re causing conflicts.
  • Adjust the filters to include holidays if any filters that might hinder displaying holiday events are applied.
  • Set the correct Windows date and time and enable the internet sync to allow Outlook to use the settings. Read about changing the time and date on Windows 11.

If you still can’t fix the Outlook calendar not showing holidays, you can try the advanced solutions outlined below to see if it works:

1. Update the Outlook app

  1. Press Windows + R keys to open the Run dialog box, type outlook.exe/safe, then click Enter to start Outlook in Safe Mode.
  2. Click Yes on the Microsoft confirm prompt.
  3. Click on File, select Office account, and click the Office updates menu.
  4. Tap the Update Options button, then click Update Now from the drop-down to install pending updates on Outlook.
  5. Restart your PC and launch Outlook to see if the calendar starts showing holidays.

Installing updates will fix Outlook errors affecting and impeding the display of holidays in the Outlook calendar.

2. Clear Outlook cache

  1. Press Windows + R keys to open the Run dialog box, type %LOCALAPPDATA%\Microsoft\Outlook\, then click OK.
  2. Right-click the RoamCache folder, select Copy, then paste it into another folder.
  3. Double-click the RoamCache folder, select all the items in the folder, or press Ctrl + A, then press the Delete icon.
  4. Restart your PC and launch Outlook to check if the calendar issue persists.

Clearing the app data for Outlook on your PC will delete corrupt files causing issues with the calendar.

3. Repair Microsoft Office

  1. Press the Windows key, type control, and launch the Control panel.
  2. Select Uninstall a program under Programs.
  3. Locate Microsoft Office and select the Change option.
  4. Then. select Quick Repair from the new menu and click the Repair button.
  5. Restart your computer and try accessing Outlook to see if the calendar shows holidays.

Repairing Microsoft Office will fix underlying software issues affecting the app’s performance.

How to add holidays to your calendar in Outlook?

  1. Click File on the top-left corner and select Options.
  2. Click on Calendar.
  3. Under Calendar options, click Add Holidays.
  4. Check the box for each country whose holidays you want to add to your calendar, and then click OK.

These steps will create and add these holidays, and duplicates are created. Besides holidays, you can add other events to Outlook. You can do that by following steps from our how to import ICS file to Outlook guide.

Alternatively, you can go through our guide on what to do if Outlook crashes after Windows updates on your PC.

Likewise, we have a comprehensive article about fixing Outlook error 0x80070021 on Windows 11.

If you have further questions or suggestions, kindly drop them in the comments section.

What to Do if Your eBay Account Gets Hacked

Platforms being breached, data getting stolen, or personal details being put up for sale on the dark web have become a common occurrence of late. Every other month, we come across such news reports. And several eBay accounts, too, got hacked recently.

In May 2014, the eBay database was compromised, and personal details, including login credentials, date of birth, and mailing information, of 145 million users worldwide were reportedly stolen.

After such a massive breach, users were concerned and wanted to find the best action after an account was hacked. But can any eBay account be hacked? Does it require advanced tools to breach the security protocols set in place by eBay? Keep reading to find out!

Can an eBay account be hacked?

Yes, an eBay account can be hacked like any other. Though every platform has a secure framework, hackers somehow manage to identify vulnerabilities and hack into the database or individual accounts.

Around the same time the first massive breach was reported, an Egyptian security researcher, Yasser H. Ali, found a vulnerability that allowed hackers to reset the password for any of the accounts. While eBay addressed it shortly, we can’t negate the possibility of hacking altogether.

Hackers are getting more advanced by the day and are employing sophisticated measures to breach a company’s database. And it’s time companies keep up with it to secure critical user data.

How do I know that my eBay account is hacked?

Here are a few signs that will help detect a hacked eBay account:

  • Unusual purchase history: If you find orders or bids you never made, the eBay account is likely hacked. But before we jump to the conclusion, verify that you didn’t share the password with anyone.
  • Changes to personal information: Often, after gaining access to an individual account, hackers change the personal information that could be used for account recovery. Any changes to these indicate that the eBay account is compromised.
  • Payment notifications: Many users found out about the successful hacking attempt after they received a notification from PayPal or another payment option they had set up on eBay.

What can I do if the eBay account is hacked?

1. Change the login credentials if you still have access

Your primary approach when the eBay account is hacked should be to change the password. Of course, you would only be able to do it if the hacker already hasn’t got to that part. And don’t choose a password you already use on other websites.

Most hackers who want to make a few purchases from your account wouldn’t bother changing the login credentials. Therefore, the recovery is relatively easier. But when the hacking is part of an elaborate nexus, you will likely lose access to the eBay account.

2. Set another security question

Security questions, though meant for account recovery, can be used to hack into an eBay account. And if someone already had access to your account, they would know the answer to the security questions. This increases the likelihood of subsequent hacking attempts.

So, it’s recommended that you immediately change the security questions on eBay. All measures you take initially will go a long way in securing your account!

3. Temporarily block transactions on the cards

If you have any cards or other payment options set on eBay, it’s recommended to block them until you gain access to the account. Many users lost a significant amount after the hacker placed orders on eBay.

While you can always dispute the payment (also called a chargeback) with the bank, settling it takes time. So, the best option is to temporarily block transactions until the account is recovered and fully secure.

4. Contact eBay support

When nothing else works, the last option is to contact eBay support. They have an automated chat system in place, but you can reach out to an agent. During the process, you must verify your identity, and eBay will help recover the account.

Besides, they will cancel any orders, bids, or listings made through your account. Remember, account recovery via eBay may take slightly longer, but it helps prevent any major misuse of the hacked account.

5. Scan the device for malware

Once you have recovered the hacked account, it’s imperative to eliminate the underlying cause that triggered the problem in the first place. And usually, it’s malware to blame.

Experts recommend that you scan the device with a reliable antivirus solution. You can also download one on the mobile device in case eBay is installed there.

With these quick tricks and tips, you should be able to recover the hacked eBay account and secure the compromised device.

Before you leave, find out if you can be hacked via an Instagram DM.

For any queries or to share how you recovered the eBay account, comment below.

Windows Event Log Keeps Stopping? Here’s What to do

Many of us regularly check the event logs to identify any issues with the PC, find out what’s affecting the performance, or figure out the reasons for crashes. But when Windows Event Log keeps stopping, all this data won’t be collected.

The issue continues to plague all iterations of the OS, including Windows 10 and Windows 11. And in most cases, we found it to be a problem at the user’s end. If you, too, find the Windows Event Log service not starting, keep reading to find out all about it!

Why is Windows Event Log stopping?

Here are the primary reasons you find Windows Event Log not running:

  • Corrupt system files: When the system files are corrupt, critical processes and tasks are likely to stop functioning, including Windows Event Log.
  • Misconfigured registry: Event logs, like any other feature, have a dedicated section in the Registry, and a single misconfigured entry can break things.
  • Existing logs are corrupt: Often, users find the corrupt state of existing logs to be responsible when Windows Event Log keeps stopping.
  • Bug in Windows: A reported bug in Windows persistently killed the Event Viewer, and it was addressed in KB4501375.

What can I do if Windows Event Log keeps stopping?

Before we head to the slightly complex solutions, here are a few quick ones to try:

If none work, move to the fixes listed next.

1. Reconfigure the Windows Event Log service

  1. Press Windows + R to open Run, type services.msc in the text field, and hit Enter.
  2. Locate the Windows Event Log service, right-click on it, and select Properties.
  3. Select Automatic from the Startup type dropdown menu, click Start if the service is not running, then click OK to save the changes.automatic to fix windows event log keeps stopping

If Windows Event Log was not running earlier, it should not. In case the Windows Event Log keeps stopping, another problem triggers it. So, move to the next solution.

2. Take full permissions

  1. Press Windows + E to open File Explorer, and navigate the following path:C:\Windows\System32\winevt\
  2. Now, right-click on the Logs folder and select Properties.
  3. Go to the Security tab, and click on Advanced.advanced
  4. Click on Change.
  5. Enter your active profile name in the text field, click on Check names, and then on OK.check names to fix windows event log keeps stopping
  6. Tick the checkboxes for Replace owner on subcontainers and objects and Replace all child object permission entries with inheritable permission entries from this object, then click OK.permissions
  7. Click Yes in the confirmation prompt.
  8. Click on Edit.
  9. Now, click the Add button.add
  10. Again, enter the username you added previously, click on Check names, and then on OK.
  11. Finally, select the user, tick the checkboxes for all permissions, and click OK to save the changes.

When the current user or SYSTEM doesn’t have the necessary permissions to edit the Logs folder, there’s a chance the Windows Event Log keeps stopping. All you have to do is take full folder access.

3. Repair the corrupt system files

  1. Press Windows + R to open Run, type cmd, and hit Ctrl + Shift + Enter.cmd
  2. Click Yes in the UAC prompt.
  3. Paste the following commands individually and hit Enter after each to run the DISM tool:DISM /Online /Cleanup-Image /CheckHealth DISM /Online /Cleanup-Image /ScanHealth DISM /Online /Cleanup-Image /RestoreHealth
  4. Now, execute this command to run the SFC scan:sfc /scannowsfc scan to fix windows event log keeps stopping

When the corrupt system files are to blame, a quick fix is to run the DISM tool and SFC scan. Both help identify problematic system files and replace them with a cached copy stored on the PC.

As an alternative, we kindly suggest a user-centered PC troubleshooting solution designed to eliminate different Windows malfunctions including corrupted system files.

It’s not only more effective but it gives you a full-round scan for detecting damaged OS files, registry issues, or even BSOD errors.

4. Clear the existing logs

  1. Press Windows + E to open File Explorer, paste the following path in the address bar, and hit Enter:C:\Windows\System32\winevt\Logspath
  2. Now, press Ctrl + A to select all the files and then Delete to clear them.clear logs
  3. Choose the appropriate response in case a confirmation prompt appears.
  4. Finally, restart the computer.

If it’s the corrupt existing logs or cache to blame when Windows Event Log keeps stopping, clearing them all should do the trick!

5. Uninstall conflicting applications

  1. Press Windows + R to open Run, type appwiz.cpl in the text field, and click OK.
  2. Select any recently installed applications after which the problem first appeared, and click Uninstall.uninstall
  3. Follow the on-screen instructions to complete the process.

Third-party applications, especially security software or antiviruses, are known to change the settings, which leads to Windows Event Log stopping persistently.

6. Perform an in-place upgrade

Tip icon Tip
The steps listed here are for Windows 11. For those running the previous iteration, it’s just as easy to perform a repair upgrade in Windows 10.
  1. Go to Microsoft’s official website, choose the product language and OS edition, and then download the Windows 11 ISO.
  2. Open the ISO and run the setup.exe file.setup.exe
  3. Click Yes in the prompt.
  4. Click Next to proceed.next
  5. Now, click Accept to agree to the license terms.
  6. Finally, verify that the setup says, Keep personal files and apps, and click on Install.in-place upgrade to fix windows event log keeps stopping
  7. Wait for the in-place upgrade to complete. It may take 2-4 hours.

An in-place upgrade comes in as an effective troubleshooting measure when the Windows Event Log stops or even in the case of other critical OS-related issues. Besides, you don’t lose any files or apps in the process.

Before you leave, do not forget to check the best event log analyzer tools that provide detailed information, often more than Event Viewer, and effectively eliminate issues.

For any queries or to share more solutions with us, drop a comment below.

Microsoft postpones multi-account search in Outlook indefinitely

Microsoft has announced that Outlook’s multi-account search feature has been postponed indefinitely. This delay comes after the initial news generated by the feature’s announcement on July 24, ’23.

Previously, users were limited to searching one account at a time. The promised functionality would have enabled users to search their configured mailboxes, presenting a unified message list combining results from various accounts. This improvement could significantly enhance productivity and user experience.

However, an update on August 3, ’23, brought unexpected news. The feature with ID 151030, which had been on the roadmap for release, was suddenly put on hold indefinitely. The exact reasons behind this decision have not been disclosed, leaving users curious about the future of this sought-after feature.

Initially scheduled for rollout in July 2024, the multi-account search feature was expected to be accessible on various platforms, including the web, for users across the globe under the standard multi-tenant configuration and GCC.

As we, the Microsoft users, wait for further information, the indefinite postponement of the Multi-Account Search feature leaves us without the anticipated enhancement to our Outlook experience.

How to Download Only Headers in Outlook [Quick Steps]

In Outlook mail, you can download only the headers of your email messages. This can be useful if you have a slow connection and want to read messages quickly.

While this is a straightforward process, some users are having a problem downloading the headers option only, so we’ll look into it and offer possible solutions in this article.

What does download headers only mean in Outlook?

If you’re pressed for time but also want to keep tabs on all the activities in your life, you’ll need to enable the headers-only option in Outlook. This means that all your emails will only show the header first.

Once you’ve verified the email subject after downloading headers, you can proceed to full items. 

This option exists because many large attachments come with emails today, such as video files and large documents. 

These attachments can often be hundreds of megabytes and take several minutes to download completely, especially if you have slow Internet connection speeds.

Still, this is not the only reason you would need to enable the header option only in your Outlook mail. Other compelling reasons include:

  • Save time – Some emails with lots of files and other attachments can take forever to download. Enabling the Outlook headers only can help you save this time.
  • Save space – If you regularly receive huge files and lots of emails, your inbox can get full quickly, and soon enough, you’ll need to purchase more storage space to keep up. 
  • Avoid malware – If you receive a malicious email, you can almost always tell from the header that it is from an untrusted party. Enabling the headers option only ensures the contents of the email will not be automatically downloaded into your inbox, and you can avoid malicious files.
  • Save data – If you’re using Wi-Fi, you don’t have to worry about bandwidth, but if you’re using data especially roaming data, when in another location, your bandwidth can quickly get used up when downloading every email and its body.

How do I download email headers?

  1. Launch your Outlook email.
  2. Click on the Send/Receive option, and in the fly-out menu that appears, select Send/Receive Groups.
  3. A Send/Receive Group window will open. 
  4. Select the Accounts you wish to enable the Outlook headers only option and click on the Edit button.
  5. A new window will open listing your Outlook accounts. Check the Download headers only option.
  6. Ensure to select the Outlook folders you wish to download the headers only by checking them, then click OK.
  7. Repeat these steps if you have multiple accounts.

It is important to note that this option only exists on Outlook version 2013 and earlier and applies to only POP3 and ActiveSync protocols. Any version from 2010 has to be an IMAP to access this feature.

So if you’ve been wondering, How do I download only headers in Outlook IMAP? You can either go back to Outlook 2010 or switch to a POP3 account.

IMAP and POP3 are two different protocols for accessing email. They serve the same basic purpose of downloading messages from a mail server to your computer but in different ways.

Microsoft probably only allows this feature in POP3 because it is considered less buggy and more reliable than IMAP.

Downloading only headers in Outlook is a big save for most, if not all, people, given all its benefits. It’s especially useful if you get a lot of spam so that you don’t have to dig through tons of messages to find what you need to read.

This way, you can stay productive while keeping your inbox clutter-free.

We hope this article helped you learn how to download only email headers in Outlook. If you have any questions about the process, please leave a comment below; we’d be happy to help.

What is Razer Synapse & How to Properly Use it?

If you have bought a Razer laptop, you will see a Razer Synapse tool pre-installed on your computer. However, the Razer Synapse tool is also recommended to install when you purchase a Razer mouse or keyboard.

In this guide, we will share with you the details of the Razer Synapse program and how you can properly use it to enhance your productivity. Let us get right into it.

What is Razer Synapse?

Razer Synapse is a tool developed by Razer that will help you design and customize the functions of Razer devices, be it a laptop, keyboard, or mouse.

One of the main tasks of using a Razer Synapse tool is that it keeps your drivers related to Razer up to date. It installs the new driver automatically to keep the devices functioning at their best.

You can also sync or change the Razer RGB lightning based on your room’s theme or the mood of the movie or game you are playing. The scenarios are endless.

Which is the current version of Razer Synapse?

Notably, the latest version of Razer Synapse that you can download on your computer is the third version.

It will come preinstalled on many Razer computers, but for other devices, you need to download it separately. The first version of Razer Synapse was introduced back in 2011.

How to download and install Razer Synapse?

  1. Visit this official website and download Razer Synapse on your PC.
  2. Open the EXE file to begin the installation.
  3. Tick the boxes for the content that you would like to install and hit the Install button. Do note that as you select the content, beside the Install button you will see the download size required.
  4. Follow the on-screen steps to complete the installation.
  5. After the installation is complete, restart your computer to apply the changes.
  6. When your PC boots up, open the Start menu by pressing the Win key. Else, you can launch the Razer Synapse program using its desktop icon.
  7. If you are using it for the first time, you will be asked to create a free Razer account. You can sync your settings with this account across your other Razer devices.

We also have a great guide on how to download Razer Synapse, so don’t miss it for additional information.

How to use the Razer Synapse program?

When you launch the Razer Synapse software, you will see different options in the Dashboard. The program will automatically detect any Razer device connected to your PC.

If you are running it on a Razer PC, the program will show you an extra System section. From here, you will be able to control the different laptop features.

Here are the different sections in the Razer Synapse program and what they do:

  • Dashboard – You will see all of your connected Razer devices on this page, along with the modules you have installed.
  • Modules – From this section, you can go over the modules that you have installed to elevate the overall experience of using a Razer device. You can install other modules from this section.
  • Global Shortcuts – Global Shortcuts lets you bind keys on your Razer products to various functions.

Let us now take a look at the steps that you can take to configure your laptop and other Razer devices using the Synapse program.

1. Configure your laptop with Razer Synapse

When you hit the System section at the top (for Razer laptops), you will be able to tweak different features of your PC. Let us look at each one of them, one by one, below.

  • Keyboard bindings
    • You can bind different keys together to perform certain actions with a specific program.
    • You can also use Razer Hypershift to add a new Fn key. Using the Razer Hypershift key, you will be able to double the number of shortcuts you have in one place.
    • Binding a key is simple. Simply press the key and select the action from the menu that you would like to perform with that key.
  • Performance
    • In the Performance section, you can easily select between Balanced, Gaming, and Creator modes.
    • You will be able to tweak the fan speed by setting it to automatic or manual.
    • The Performance section also lets you change the screen refresh rate.
  • Lighting
    • Under the System Lighting section, you can change the brightness of the lights and illuminate the logo when plugged in or on the battery.
    • You can set the different lighting options, such as switching it off when the display is off or when the PC is in an idle state.
    • You can choose from the various lightning effects and the color to appear.

2. Configuring other devices

Let us take an example of configuring a mouse. When you hit the Mouse tab at the top, you will see multiple configuration options.

  • Customize section
    • Here you will be able to change what the mouse buttons do.
    • You will be able to save your settings for a particular profile as well.
    • You can also change whether you use the mouse left-handed or right-handed.
  • Performance section
    • You will be able to tweak the sensitivity settings and change the sensitivity stages between Stage 1 to Stage 5.
    • You have the option to tweak the Polling Rate, i.e., the frequency of data updates of the mouse.
    • Lets you access the Microsoft Mouse settings as well.

That is it from us in this guide. You will see different options when you connect a different Razer device and use it with the Synapse program.

If the Razer Synapse program is not opening, you can apply the solutions mentioned in our guide to resolve the problem.

You can also check out our guide that will help you resolve the problem where the Razer Synapse failed to start on Windows 11. This isn’t the only software with issues, and we wrote how Razer Cortex is crashing the PC for some users.

Let us know in the comments below if the above guide helped you understand what Razer Synapse is and how you can use it.

How to Fix Outlook Could not Create the Work File

Outlook could not create the work file error message, which is an annoying error users encounter. This error usually occurs if the Cache string value is not pointing to the valid directory in the registry.

What makes this error annoying is that it prevents you from accessing the Outlook app. Thankfully, there are surefire solutions that can help you eliminate the error, and we will detail them in this guide.

Why Outlook could not create the work file? 

Below are some of the causes of the Outlook could not create work file, check the temp environment variable error:

  • Wrong Cache string value: This error pops up if the cache string value is not pointing to a valid directory in the registry. You can fix this by changing the registry value in the Registry Editor, which, in turn, fixes the issue with your temporary files.
  • Issues with Office installation: Another cause of this Outlook work file issue is problems with your Office installation. You can fix this by repairing the package.

How can I fix the Outlook could not create work file error?

1. Edit the registry settings

  1. Press the Windows key + R, type regedit, and click OK to launch the Registry Editor.
    regedit outlook could not create work file
  2. Navigate to the path below in the left pane: HKEY_CURRENT_ USER \Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folderspath
  3. Now, double-click the Cache key in the right pane.
    cache
  4. Next, change the Value data to the path below: %USERPROFILE%\AppData\Local\Microsoft\Windows\INetCache
  5. Finally, click the OK button and close the Registry Editor.
    value data outlook could not create work file

The first thing to do to fix Outlook could not create work file, check the temp environment variable error is to change the string value pointing to the wrong directory in the Registry Editor.

This should fix the issue with the Cache registry key and restore normalcy on Outlook.

2. Update Office

  1. Launch any Office app and click the File menu at the top.
  2. Select More and choose the Account option in the left pane.
    more account
  3. Now, click Update Options under the Product Information section.
  4. Finally, select Update Now from the Update Options drop-down menu and wait for the update process to complete.
    update now

 In some cases, Outlook could not create work file issue might be due to an outdated Office app. Updating Microsoft Office should eliminate the error.

Note that if you bought Microsoft Office from the Windows Store, you can install Office updates from there.

3. Repair Office

  1. Press the Windows key + S, type control in the search box, and select Control Panel.
    control panel outlook could not create work file
  2. Choose Uninstall a program under the Programs option.
    uninstall a
  3. Now, right-click Microsoft Office and select Change.
    change
  4. Tick the radio button for Online repair and click the Repair button.
    online repair outlook could not create work file
  5. Finally, follow the onscreen instructions to repair your Office files.

The Outlook could not create work file error might be due to problems with Microsoft Office. This is especially true if the issue affects other Office applications.

Following the steps above should help you fix this. This solution can also help you fix other issues like this is not a valid file name on Outlook.

Outlook could not create work file, check the temp environment variable error is a pretty frustrating issue that sometimes affects other Office apps like Microsoft Word.

However, you can fix this issue effortlessly with the solutions below. In the same vein, if your Outlook data file cannot be accessed, you can check our detailed guide to solve it.

Finally, if you are getting an Outlook PST cannot be found error, we have an article to help you fix that too.

Instagram Error Feedback Required: 3 Ways to Fix it

Instagram is undoubtedly one of the most-used social media platforms for interacting with friends, celebrities, and fans. However, it is not immune to the occasional issue, with some users complaining of the Instagram feedback required error.

This login error prevents you from gaining access to the app until it is cleared. Thankfully, fixing it is not difficult, as we will show in the ensuing sections of this article.

Why am I getting the feedback required error on Instagram?

The reasons for the Instagram feedback required error during login are within a close circle and not far-fetched. Below are some of them:

  • Unusual user activity – If you are performing activities, like post sharing, likes, and comments, at an unusually high rate, you are likely to get this error. Instagram servers might flag you as a bot.
  • Server issues – In some cases, this problem might be due to server downtime. You can only wait for it to be resolved before logging into your account.
  • Corrupt app data – If the Instagram app cache is corrupt, it might lead to this error. A quick way around this is to clear the app data.
  • Issues with the app installation – At times, the feedback required error can be down to problems with the Instagram app. Uninstalling the app and reinstalling it after some time should get rid of the error.

How do I fix the Instagram feedback required error?

Before proceeding to the more complex solutions in this section, try the following troubleshooting steps:

  • Check the Instagram server status
  • Wait it out, as it might be a temporary ban on your account
  • Use the web version of Instagram
  • Use a proxy or a VPN. If you are using one when this error occurs, deactivate them temporarily.
  • Change the network type

If the issues persist, proceed to the solutions below:

1. Clear the app data

1.1. On PC

  1. Press the Windows key + I and select Apps in the left pane.
  2. Choose Apps & features.
    apps and instagram feedback required error
  3. Now, click the three vertical dots before Instagram and select Advanced options.
    advanced options
  4. Finally, click the Reset button and wait for the process to complete.
    reset

1.2. On Android

  1. Launch the Settings app and click the Apps option.
    apps and instagram feedback required error
  2. Select Instagram.
    option
  3. Now, choose Storage.
    storage and instagram feedback required error
  4. Finally, tap the Clear data and Clear cache buttons.
    clear data

1.3. On iPhone

  1. Launch the Settings app and select General.
    general instagram error feedback required
  2. Choose iPhone Storage.
    iphone storage
  3. Now, tap Instagram.
    instagram
  4. Finally, tap the Offload App option and confirm the action to clear the data.
    offload app instagram error feedback required

Corrupt Instagram data might be the reason you are getting the feedback required error. Clearing the data, as shown above, should fix this issue effortlessly.

2. Update the app

2.1. On PC

  1. Click the Microsoft Store icon on your Taskbar.
  2. Click the Library option in the left pane.
    library
  3. Now, click the Get updates button.
    get updates
  4. Finally, click the Update button before Instagram.

2.2. On Android and iPhone

To update the Instagram app on Android and iPhone, you only need to go to Google Play Store and App Store respectively, search for Instagram, and click the Update button.

This should help you fix the Instagram feedback required error effortlessly.

3. Reinstall Intagram

  1. Press the Windows key + I and select Apps.
  2. Click Apps & features in the right pane.
    apps
  3. Now, click the three vertical dots before Instagram.
  4. Choose Uninstall and follow the onscreen instructions to complete the removal.
    uninstall and instagram feedback required error
  5. Finally, go to the Microsoft Store, search for Instagram, and click the Get button.

3.2. On Android

  1. Go to the Settings app and tap Apps.
    apss
  2. Select Instagram.
  3. Tap the Uninstall button and confirm the action.
    uninstall and instagram feedback required error
  4. Finally, go to Google Play Store, search for Instagram, and click the Install button.

3.3. On iPhone

  1. Go to Settings and select General.
    general uninstall
  2. Tap iPhone storage.
    iphone storage instagram error feedback required
  3. Choose Instagram.
  4. Now, select Delete App.
    delete app
  5. You can now go to the App Store to reinstall the app.

If everything you have tried failed to fix the Instagram feedback required login error, you might need to reinstall the app. However, according to some users, you need to wait for about 48 hours before reinstalling it to make it work.

With this, we can now conclude this detailed guide on how to fix the feedback required error on Instagram on the app and the web version. The error should now be history, provided you follow the steps above properly.

If you are dealing with other issues, like Instagram not working with WiFi, check our guide to fix that too.

Feel free to let us know the solution that helped you fix this issue in the comments below.

How to Fix A Disk Read Error Occurred in 4 Quick Steps

If you have been running into A disk read error occurred. Press Ctrl+Alt+Del to restart the error message on your computer, then you’re not alone. The error has been recurrent on Windows devices and can be fatal if not fixed earlier.

However, fixing a disk read can be challenging because several factors can cause the issue. Hence, we recommend you explore the solutions in this article.

What does a disk read error mean?

A disk read error occurred is an error message that occurs when the system encounters difficulty reading data from the hard drive or other storage media.

It indicates that the computer’s BIOS (Basic Input/Output System) or the operating system cannot read data from the hard disk, RAM module, or other storage media.

Additionally, a disk read error occurred is often accompanied by additional information, such as Press Ctrl+Alt+Del to restart. 

Keep in mind that this affects all types of drivers, and we have a great guide on how to fix an external hard drive error if you ever encounter one.

What causes a disk read error?

  • A failing or faulty hard drive, bad sectors, installation discs, damaged platters, or mechanical failures can prevent data from being read.
  • If the disk cable is incorrectly connected or damaged between the hard drive and motherboard, it can result in communication errors.
  • Incorrect default settings in the computer’s BIOS, such as boot order or hard drive configuration, corrupt BIOS can cause disk read errors.
  • In cases where the Master Boot Record, a crucial part of the boot process, becomes corrupt, the system might be unable to locate the OS.
  • Corrupted system files, software conflicts with hard drives or storage devices, or improper shutdowns due to power outages can cause the error.
  • Excessive fragmentation of the hard drive can slow down data retrieval and potentially cause the disk read error.
  • Issues relating to other hardware components, such as the motherboard, RAM, or CPU, could contribute to disk read errors.

Regardless, you can troubleshoot the error by following the detailed steps discussed in the next section.

How do I fix the disk read error?

We recommend you go through the following preliminary checks:

  • Unplug any faulty cable or USB/DVD drives connected to the computer and see if the error occurs.
  • Power cycle the computer to reload the drive and fix any glitches interfering with the system reading it.
  • Ensure all data and power cables connecting the hard drive to the motherboard are securely plugged in.
  • Run Windows built-in hardware diagnostics to troubleshoot hardware problems causing the disk read error.
  • Try the drive on another computer to see if it works. If the hard drive fails, you might need to replace it.

Proceed with the solutions below if the issue persists:

1. Run the check disk utility

  1. Left-click the Start button, type Command Prompt, and click the Run as administrator option.
  2. Click Yes on the User Account Control (UAC) prompt.
  3. Type the following command and press Enter: chkdsk C:/r/x
  4. Exit the Command Prompt and restart the PC to check if the disk read error persists.

Running the CHKDSK command allows the system to access all disks, read hidden partitions, and troubleshoot issues that may cause errors when reading them.

Check our guide if you experience chkdsk.exe running on every boot issue on Windows 11 for fixes to resolve it.

In case you’re not familiar with this tool, we have a great guide on how to scan with Disk Repair and fix various errors.

Keep in mind that repairing disk errors might take an hour, so be sure to remain patient.

2. Rebuild the Master Boot Record

  1. Boot your computer using a Windows installation USB or DVD to open the Windows Recovery Environment (WinE).
  2. Select your language preferences and click Next.
  3. On the next screen, click Repair your computer.
  4. Choose Troubleshoot and then select Advanced options.
  5. From the advanced options, select Command Prompt.
  6. In the Command Prompt, type the following command and press Enter: bootrec /fixmbr  bootrec /fixboot   bootrec /scanos   bootrec /rebuildbcd
  7. Restart your PC and check if you can fix the problem.

The above steps will rebuild and repair the Master Boot Record back to its default values. Further, you can read about what to do if the Bootrec /Fixboot access is denied on Windows PCs.

3. Reset BIOS

  1. Press the Windows + I to open the Settings app.
  2. Select the System and click on Recovery.
  3. Click Restart Now under Advanced startup.
  4. Tap on Troubleshoot and select Advanced options.
  5. Click on UEFI Firmware Settings, and click Restart. Your system will restart and load the BIOS.
  6. In BIOS Mode, find the Reset to default option and click on it to perform the resetting operation.

Resetting BIOS (Basic Input/Output System) will restore, allowing it to initialize and manage hardware components during startup according to the factory settings.

Note icon NOTE
Try the last option below if you can’t fix the problem with the steps above. However, we don’t recommend trying this option before any other as it has some drawbacks, like security vulnerabilities and others.

4. Disable secure boot in BIOS

  1. Repeat steps 1-5 from the above solution to open the UEFI Firmware Settings.
  2. Find the Secure Boot option in your BIOS menu, then set it to Disabled. (It is usually in either the Security tab, the Boot tab, or the Authentication tab).
  3. Save changes and close the Recovery window for the PC to reboot.

With Secure Boot disabled, your system will now allow booting from other devices, including those not signed with the manufacturer’s keys. It is helpful when troubleshooting boot issues and a disk read error.

Alternatively, you can go through our detailed guide on ways to fix the disk structure corrupted and unreadable error on Windows 11.

Likewise, you may be interested in what to do if you run into the Windows detected a hard disk problem error on your PC.

Should you have any questions or suggestions, kindly drop them in the comments section.

Minecraft Won’t Allow to Play Multiplayer? Here’s What to Do

If you have encountered the Multiplayer is disabled, Please check your Microsoft Account settings error message while trying to play Minecraft multiplayer; this guide can help!

We will talk about some of the expert-recommended solutions to fix Minecraft not allowing multiplayer right after discussing the causes.

Why is Minecraft not letting me play multiplayer?

There could be various reasons why you can’t access the Minecraft Multiplayer version; some of the common ones are mentioned here:

  • Minecraft server issue – If the Minecraft servers face downtime or are offline, you might experience this issue. Check the server status; if down, wait for a while.
  • Incompatible mods – The mods installed on your game will not let you join the server, thus causing this error. Turn off the mods and try again.
  • Misconfigured privacy settings – If the privacy settings for your Microsoft account are not configured correctly, you can’t access the multiplayer server.
  • Online subscription expired – You won’t be able to play Minecraft multiplayer if the online subscription has expired. You need to renew the subscription to access the online features.
  • DNS server error – The default DNS server settings of Windows could prevent you from using the Minecraft server. Try changing the DNS to Google DNS.

Now you know the causes of the issue, let us check out the detailed solutions to fix the issue.

How can I fix Minecraft not allowing multiplayer?

Before engaging in advanced troubleshooting steps, you should consider performing the following checks:

  • Ensure your internet connection is stable.
  • Verify if your Windows OS and Minecraft are up to date
  • Check the Minecraft server status.
  • Make sure your age is set to 18+ on your Microsoft account.
  • Turn off the antivirus software temporarily.
  • Verify the online subscription is active.
  • Try using a VPN.

Once done, move to detailed solutions to get rid of the problem.

1. Modify the Xbox profile settings

  1. Sign in to your Microsoft account.
  2. Click Xbox from the top menu.Xbox  option  Minecraft not allowing multiplayer
  3. Go to your profile picture and, click it, select Xbox profile.Xbox profile
  4. Next, click Privacy Settings.Click Privacy Settings
  5. It will prompt you to Verify your identity, choose any options, and proceed.Sign in verify your identity
  6. Next, enter the code sent and click Verify.Enter the code
  7. Under Privacy, select Everyone or Allow for all the options displayed and click Submit.Modify Privacy Settings  Minecraft not allowing multiplayer
  8. Next, go to the Xbox Series X|S, Xbox One, and Windows 10 devices Online Safety tab, select Allow for all the options and click Submit.Modify Privacy Settings  Minecraft not allowing multiplayer

Once done, close the window and relaunch Minecraft to check if the issue persists.

2. Launch the game without mods

  1. Press the Windows key, type minecraft and click Open to open Minecraft launcher.Minecraft launcher  Minecraft not allowing multiplayer
  2. Go to the Installations tab from the top menu.
  3. Click the New Installation option.
  4. Type in a name for the installation and, go to Version, select the latest release from the drop-down. If you are confused about which one to choose, like the one that starts with the word release.
  5. Click Create.Create a new installation
  6. Next, go to the Play tab and choose the installation you created to play.

This method only resolves the issue for Minecraft Java Edition.

3. Allow Minecraft through Windows Microsoft

  1. Press the Windows key, type windows security and click Open.
  2. Go to Firewall & network protection from the left pane, and click Allow an app through firewall.Firewall & network protection -  Allow an app through firewall.
  3. On the Allowed apps window, click Change settings.Change app
  4. Next, click Allow another app.
  5. Click Browse.Browse
  6. Navigate to program files, select Minecraft and click Add.
  7. Click Add again.
  8. The game will be added to the list; ensure you have placed a checkmark next to Public and Private and click OK.

4. Flush DNS

  1. Press the Windows key, type cmd and select Run as administrator to launch Command Prompt with admin privileges.CMD elevated Minecraft not allowing multiplayer
  2. Type the following command to clear the IP address and other DNS records and hit Enter: ipconfig /flushdnsipconfig /flushdns
  3. Once the command is executed successfully and you see a Successfully flushed the DNS Resolver Cache message, close the Command Prompt window.

5. Use Google DNS

  1. Press the Windows key, type control panel and click Open.Control Panel start menu Minecraft not allowing multiplayer
  2. Select Category from View by options and click Network and Internet. Category - Network and Internet
  3. Click Network and Sharing Center.Network and Sharing Center
  4. Click the Change adapter settings link.Change adapter settings
  5. Right-click the active connection and select Properties.Properties Network
  6. On the next window, select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
  7. Select the Use the following DNS server addresses option.IPV4 Properties
  8. And for type 8.8.8.8 for the Preferred DNS server and 8.8.4.4 for the Alternate DNS server.Google DNS Minecraft not allowing multiplayer
  9. Click OK to confirm the changes.
  10. Click OK.

6. Reinstall the app

  1. Press Windows + R to open the Run dialog box.appwiz.cpl  - Minecraft not allowing multiplayer
  2. Type appwiz.cpl and click OK to open the Programs and Features window.
  3. Select Minecraft from the installed apps list and click Uninstall.Minecraft  Uninstall
  4. Follow the onscreen prompts to complete the process.
  5. Next, go to Minecraft’s official website and click Get Minecraft.Get Minecraft  - Minecraft not allowing multiplayer
  6. Follow the instructions to install a fresh copy of the game.

So, these are methods you can use to resolve Minecraft not allowing multiplayer issues on your computer and play the game online with your friends without interruption.

If Minecraft is not opening for you on Windows 11, we suggest you read this informative guide to regain access to the game. And if you’re having trouble accessing the marketplace, we also have a guide for that.

Please feel free to give us any information, tips, and your experience with the subject in the comments section below.

0x8019019a Error Code: How to Fix Your Mail App in 4 Steps

Since its last update, it is common to encounter an error code 0x8019019a while using the Mail app on Windows PCs. This problem makes it impossible to set up or sync Yahoo Mail using the Mail app.

Hence, the bothersome question remains for several users: how can I fix the Mail app error on my Windows PC? Thus, this article will discuss some fixes to resolve the 0x8019019a error.

What does code 0x8019019a mean?

Error code 0x8019019a usually occurs when setting up or syncing Yahoo Mail on a Windows device using the Mail app.

This error is associated with connectivity issues, often related to problems in establishing a secure connection between the Mail app and Yahoo’s servers.

What causes error code 0x8019019a?

  • Network congestion, and poor or unstable internet connection cause the error.
  • Security software or firewalls on your computer can block the Mail app’s connection to the internet or servers, resulting in the error.
  • An outdated Mail app or operating system can cause compatibility issues with Yahoo Mail’s servers.
  • Temporary server problems on the Mail client can prevent it from establishing a connection during setup.
  • Third-party apps or add-ons that interact with the Mail app might cause Yahoo Mail not to receive emails along with this error.
  • Corrupted data related to the Mail app might prompt the 0x8019019a error.
  • Incorrect or misconfigured proxy settings can hinder the Mail app’s connection to Yahoo’s servers.

Regardless of the causes, you can troubleshoot the error by trying the solutions in the next section.

How do I fix code 0x8019019a?

Before anything else, observe the following preliminary checks:

  • Restart the Mail app and the PC to refresh its processes and check if it works.
  • Power cycle your router/modem or connect to a stable internet network to fix network problems.
  • Double-check your Yahoo Mail account settings in the Mail app.
  • Temporarily disable any security software or firewall and attempt to set up your Yahoo Mail account again.
  • Update the Windows operating system to troubleshoot compatibility problems.
  • If you’re using a VPN, try temporarily disabling it and then attempt to set up your Yahoo Mail account.

1. Remove and re-add the Yahoo account

  1. Launch the Mail app and click on Accounts in the left pane of the window.
  2. Click on your Yahoo account and tap on the Delete Account option.
  3. Click the Delete button on the new prompt.
  4. Restart your PC and relaunch the Mail app.
  5. Add the Yahoo account to the Mail app and check if the 0x8019019a error is resolved.

Re-adding your account resolves account-related issues preventing the Mail app from running smoothly. Also, it helps refresh your account history.

2. Update the Mail app

  1. Left-click the Start button, type Mail, and select Share from the context menu.
  2. Microsoft Store will launch the Mail app page.
  3. Check if an update is available for the app. If there are updates available, click on the Update button.
  4. After the update, restart your computer, try adding your Yahoo account with the Mail app, and see if the issue is resolved.

Updating the Mail app will fix bugs from the outdated version causing the error and install patches for improving the app performance.

3. Generate a password and use Other Account POP, IMAP

  1. Open your web browser and enter Yahoo mail with your ID and password.
  2. In the top-right corner, click on your Profile and choose Account information.
  3. Select the Account Security option. Towards the bottom of the page, click on Manage app passwords.
  4. Select the Other app from the new drop-down menu.
  5. Click the Generate app password button to prompt Yahoo Mail to produce a 16-character password for your account. Copy the password to your clipboard.
  6. Open the Mail app on your computer, go to Settings, and then Manage accounts.
  7. Click the +Add account button and select Other accounts (POP, IMAP).
  8. Input your Yahoo email address and paste the 16 characters password you copied from Yahoo.
  9. Type your name and click Save.

Generating the 16 characters’ password allows you to resolve security problems causing the 0×8019019a error code. Check what to do if Yahoo Mail is not working in Chrome.

4. Reset the Mail app

  1. Press Windows + I key to open the Settings app.
  2. Click on Apps and select Installed apps.
  3. Then, locate the Mail and Calendar app. Click on the options, then click Advanced options.
  4. Click on the Reset button.
  5. Open the Mail app and check if the error persists.

Resetting the Mail client will troubleshoot settings and configurations interfering with its functionality.

Lastly, you may be interested in our comprehensive guide about how to fix the Mail app not working on Windows 11.

If you have further questions or suggestions, feel free to use the comments section.

Can Viber be Hacked? [Prevention Guide]

Viber is a popular instant messaging and VoIP platform which falls under the same category as WhatsApp. Though the former never really became a significant market player, its user base has steadily increased. But can Viber be hacked?

This question has troubled Viber users for a long time. And given the overreliance on a platform with over a billion registered users, questions will be raised on the safety and security aspects of Viber. Keep reading to find out all about it!

Is Viber safe?

We have had a few instances where users claimed that their Viber accounts were hacked or news portals publishing stories along the same lines. But, Viber denied these news reports through a tweet back in 2022.

Yet, we all know how companies initially take an aggressive stand regarding hacking reports, only to set up inquiries later on to verify the facts.

Coming to Viber, it, like any other platform, can be hacked. Experts have managed to identify loopholes in the Viber framework, and the reports of these tests have been published online.

In 2013, the Viber Support website was also defaced by hackers after an employee fell prey to a phishing email that exposed two systems. Viber, again, claimed that the user data wasn’t compromised in the breach and was in safe hands.

Besides, as per a report published in Forbes, installing Viber renders the device vulnerable and increases the likelihood of hacking. The report lists a wide array of apps, including some of the prominent names in the market.

How do I hack Viber?

We won’t give you any ideas on hacking Viber! However, some apps claim to bypass the security framework and access Viber messages when installed on the user’s mobile phone.

This is a long shot! You will have to purchase a paid subscription; there’s no guarantee it will work. You might lose a few bucks or, even worse, get in trouble with law enforcement, given that hacking is a legal offense.

How can I keep my Viber account safe?

1. Don’t sign into multiple devices

A simple tip to prevent your Viber account from being hacked is not to sign into every device. Limit Viber access to a single device and check all messages and multimedia on it.

The likelihood of your account being hacked, be it on any platform, is higher when the login credentials are stored on several devices. If one of these gets compromised, your data will be available to hackers!

2. Avoid using Viber on public networks

Public networks pose a major threat! Surprisingly, most users are unaware that their data and activity on a public network can be easily monitored. Besides, hackers can access their devices and steal login credentials.

Public networks, particularly those in cafes and restaurants, don’t have any advanced security protocols. Manipulating these is relatively easier; once that happens, every insecure device on the network is compromised.

If you have to access the Internet on a public network, ensure you are connected to a reliable VPN to mask critical details and activity, though it won’t help in every case.

3. Never open suspicious links

Phishing emails and links are a common trend that has emerged of late when it comes to hacking devices and accounts. Users receive a message from someone in the contact list (whose account is already hacked) with a link. These links work in two ways!

Either user will be redirected to a website that looks similar to the sign-in page, and when they enter the login credentials, it’s automatically registered in the hacker’s database.

In other cases, malware is downloaded on the device used to access the link, which can then read all the Viber messages and find the login credentials.

So, never open any links you are unsure of! If someone sends you one, contact them on another platform and verify whether they sent it or their Viber account is hacked.

4. Set up 2-FA

Viber offers 2-factor authentication to users, and it’s critical that you set it up. This way, even if the login credentials are compromised, hackers won’t be able to access your Viber account.

Every major platform now offers 2-FA, and experts call it a must in the war against cybercrime and hacking.

5. Regularly scan the device

We all have an antivirus on our PC, be it the built-in Windows Security on the Windows OS or another effective third-party solution. And these are just as critical on mobile devices!

With mobile phones becoming the primary device for many, their security becomes just as important. So, install effective security software on your phone and regularly scan the device.

If any threats are found, change the Viber login credentials and those for the other apps immediately!

With these tips and tricks, you can prevent your Viber account from being hacked. Also, you must download all Viber updates as soon as they are released because many contain patches for known bugs and vulnerabilities.

As such, you can avoid other system temporary failure errors that may creep up due to an outdated app.

Before you leave, find out all about QR codes and whether it’s possible to hack into a device using QR codes.

For any queries or to share more tips with us, comment below.

Download Did Not Complete in Excel: How to Fix This Error

Microsoft Excel is a powerful tool, but the thing is, you never stop learning when it comes to all the ins and outs. You’ll encounter new errors every now and then, such as download did not complete.

Most users claim this error appeared when they were refreshing their Power Query. Something may be wrong with your workbook, but let’s get down to the fixing part.

Why am I getting the download did not complete error in Excel?

Power Query is a data manipulation tool that comes with Excel and is especially important when dealing with a large data set. It has a lot of potential, but it can also create problems and errors.

The download did not complete is one of them, so below, we explore some of its possible causes:

  • Protected sheet – If you are trying to open a protected workbook created in an older version of Power Query for Excel, you may encounter this error.
  • Importing too much data – If you try importing too much data from one sheet to another, you may experience this error or the initialization of the data source failed. It could be due to memory or disk space issues.
  • Incorrect source location – If you have moved or copied the file to another location on your computer and then tried to open it in Power Query, you will get this error message.
  • Change in data structure – Power Query requires that your dataset must be in the exact same structure as when you created it. If there are any changes, you will need to update your query or get the download did not complete error.

How do I fix Power Query errors in Excel?

Check off the following basics before moving to the technical solutions: 

  • Ensure your Excel app is up-to-date.
  • Check that your PC is not low on memory.
  • Verify that there have been no changes in query and structure.
  • Try duplicating the query and see if the error persists.
  • Unprotect the sheet, then reprotect.

1. Disable background refresh

  1. Click on a cell in the workbook, then click on Data on the top taskbar menu.
  2. Under Queries and Connections, select Refresh All, then in the fly-out menu, select Connection Properties.
  3. A Query Properties window will pop up. Navigate to the Refresh control section and uncheck Enable background refresh.

Background refresh is a feature of Microsoft Power Query for Excel that allows you to keep your queries up to date even when you are working on other files. The only drawback is that this constant refreshing can sometimes revert data to its original form.

If you had made any changes, they will be lost. Disabling it will allow you to complete your query.

2. Repair MS Office

  1. Click on the Start Menu icon, type Control Panel in the search bar, and click Open. control-panel-search fallout new vegas runtime error
  2. Navigate to Uninstall a program under Programs.going uninstall program control panel
  3. Locate MS Office, click on it, and select Change.
  4. Select the Online Repair option and click on the Repair button.

This step could help resolve any issues with corruption on the Excel app. If it doesn’t work, you may have to reinstall the application.

While you’re still here, check out our other article on sharing violation error in Excel and find out how to bypass it.

And that sum’s up this article. However, this doesn’t have to end here, as you can get interactive in the comment section by sharing more ideas on this matter. Drop us a comment below for any additional thoughts.

Chrome Tab Casting is Not Working? 5 Ways to Fix it

Casting a Chrome tab to your TV or any other device is so easy to do. You can stream YouTube videos or anything else straight to your device without moving. That’s not all. You can also cast straight from your Windows 11 device to a TV. 

But what happens when casting doesn’t work? We get down to the bottom of this below and offer worthy solutions. 

Why is my Google Chrome browser casting not working? 

You may be facing issues with Chrome tab casting not working. Either the cast icon is not showing, or you can’t cast. It may be due to the following reasons:

  • Network issues – The connection between your computer and the device you are trying to cast from must be similar and fast enough to stream over Wi-Fi. Otherwise, your casting will keep getting interrupted if your connection keeps dropping.
  • Outdated browser – If your Google Chrome browser is not the latest version, casting may not work because of a compatibility issue between the two devices.
  • Faulty update – A browser update can sometimes be problematic and interfere with how features work.
  • Virus infection – You may be out of luck with getting the cast feature to work if a virus finds its way into your system. Such infections take control of your settings and alter how things work.
  • Unsupported device – If the device you want to connect to via cast does not have the feature or doesn’t support it, this might be the reason why the Chrome tab you’re trying to cast is not working.
  • Outdated firmware – If you’re trying to cast on your TV but can’t remember the last time you checked for any firmware updates, this could be the reason why you can’t cast a Chrome tab.
  • Conflicting software – If you’ve installed a third-party casting software or extension on your Chrome browser, it may override any other attempts to cast.

How do I force a tab to cast in Chrome?

Start with the following basic workarounds before moving on to the rest of the solutions:

  • Check whether your device meets the minimum system requirements for casting. 
  • Verify that both devices are connected to the same network.
  • Check whether someone else is casting and ask them to end their session before you try casting.
  • Ensure that your Wi-Fi network is working correctly and that it isn’t overloaded with other devices using it at the same time.
  • Check whether any bandwidth limits have been set as they may be the cause of the casting issue.
  • Ensure you have the latest version of Google Chrome installed on your computer.
  • Uninstall any conflicting software and disable similar extensions.
  • Update your Windows OS and TV firmware.
  • Try casting on another device to establish whether one of your devices is faulty.
  • Restart both devices.

1. Run the Internet connection troubleshooter

  1. Press the Windows key and click on Settings.settings windows 11
  2. Select System and click on Troubleshoot.Open system troubleshooter
  3. Click on Other troubleshooters.other troubleshooters
  4. Locate the Run button next to Internet Connections and wait for the results.

If you are casting to Chromecast with Google TV and the receiver does not respond or keeps disconnecting, rule out a remote issue. Use our Google TV remote not working guide to re pair or reset the remote, then try casting again.

2. Scan for viruses

2.0 Chrome

  1. Open your Chrome browser and click on the three vertical ellipses at the top right corner.
  2. Select Settings.Settings CHrome
  3. Next, click on Reset and cleanup, then select Cleanup computer on the right.
  4. Hit the Find button next to Find harmful software.
  5. Wait for the scan to finish and remove any recommended software.

2.1 System

  1. Press the Windows key, search Windows Security, and click Open.
  2. Select Virus & threat protection.
  3. Next, press Quick scan under Current threats.
  4. If you don’t find any threats, proceed to perform a full scan by clicking on Scan options just below Quick scan.Scan options
  5. Click on Full scan, then Scan now to perform a deep scan of your PC.Full Scan Scan Now
  6. Wait for the process to finish and restart your system.

If your system has been infected by a virus, a simple scan in Chrome won’t do it. You need to perform an in-depth scan using Windows built-in Windows Defender. Still, we recommend another overall scan with a more comprehensive third-party tool, such as TotalAV.

3. Clear cache and cookies 

  1. Launch your Chrome browser and click the three vertical ellipses in the top right corner.
  2. Select Settings.Settings CHrome
  3. Click on Privacy and security, then select Clear browsing data.
  4. Check Cookies and other site data and Cached images and files, then hit Clear data.Clear data

4. Reset your network

  1. Click on the Start Menu icon and click on Settings.settings windows 11
  2. Select the Network & internet tab from the ones listed in the navigation pane on the left.
  3. Click on Advanced network settings from the options listed on the right.going advanced network settings win11
  4. Next, click on Network reset under More settings.Network Reset 1
  5. Click on the Reset now button next to Network reset.Network Reset now

5. Reset your browser

  1. Open your Chrome browser and click on the three vertical ellipses at the top right corner.
  2. Select Settings.Settings CHrome
  3. Next, click on Reset and cleanup, then select Restore settings to their original defaults.
  4. Confirm Reset settings in the next dialog box.

At this point, if none of these methods have enabled you to cast your Chrome tab to another device, it is time to reinstall the browser.

Another worthy troubleshooting step to try is to rollback a few browser versions, especially if the Chrome tab casting not working issue started after you updated your browser.

That’s it for this article, but if you have any other solution that worked for you, we’re more than happy to hear it. Start us off in the comment section below.

Services Startup Type is Grayed Out? 3 Ways to Fix it

The service startup configuration determines how to initiate specific services on your Windows computer when booting up. Also, the startup type setting allows you to control how a service is either disabled, startup automatically, or manually.

However, startup service type grayed-out errors can be frustrating as it restricts your control over the startup service on your computer. Therefore, we will discuss what causes the error and walk you through three proven ways to fix it.

Why is my service Startup type greyed out?

  • System Policy settings the administrator imposes can hinder you from accessing specific configurations as the service startup type.
  • Windows Registry errors like incorrect or restricted permission can impede you from reconfiguring the service startup.
  • Already running service startups are usually locked on the Windows operating system to prevent changes while it remains active.
  • Third-party software interference or antivirus apps can restrict access to service settings to increase system security.
  • Specific Windows operating system services are protected to prevent unauthorized changes and maintain system stability and security.
  • Corrupt Windows operating system files cause a restriction to modifying specific settings like service startup.

Identifying the specific factors causing the error will aid with troubleshooting. Note that these factors vary on different PCs and circumstances. However, we will walk you through explicit steps to troubleshoot it.

How do I fix the service startup type grayed out?

Try the following before proceeding with the following advanced troubleshooting:

  • Switch to account user with administrator privilege.
  • Verify if the service is already running on your computer.
  • Run an SFC scan to check and fix Windows file integrity.
  • Restart your computer to close background apps, and refresh your System.
  • Check if there is a Group policy that can restrict modification if you are in a network environment.

Proceed with the following advanced troubleshooting if the error persists on your PC.

1. Run services as administrator

  1. Left-click the Windows icon and type Services.
  2. Then, click on Run as Administrator to open Windows services with administrator privilege.

Running the Windows Services.msc as administrator will give services administrator permission allowing you to modify the service startup.

2. Disable services temporarily

  1. Press the Windows key button, type Services, and select Run as administrator to open it.
  2. Then, navigate to the service you want to modify, right-click, and select Stop from the context menu.
  3. Further, go to the service you want to modify and check if the error is no more.

Disable service startup temporarily will stop locked running services that impede you from making changes.

Further, you can read our complete guide on what service.msc is how to open and use it on your computer.

3. Modify the service startup via Registry Editor

  1. Left-click the Windows icon, type Regedit, and press Enter to open the Windows Registry Editor.
  2. Copy and paste the following directory into the address bar and press Enter: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ 
  3. On the left pane, navigate to the startup service you want to modify that grayed out and click on it.
  4. Then, right-click anywhere on the right side pane, click on New from the context menu, and select DWORD Value.
  5. Rename the DWORD Value to DelayedAutostart, double click on Start, and DelayedAutostart created.
  6. Further, set the following values to modify the service startup:
    • To Disable the service, set Start to 4 and DelayedAutostart to 0.
    • Manual startup, set Start to 3 and DelayedAutostart to 0.
    • Automatic startup, set Start to 2 and DelayedAutostart to 0.
    • For Automatic (Delayed Start), set Start to 2 and DelayedAutostart to 1.
  7. Close the Registry Editor, restart your device, and check if the error persists.

Note that the service startup will Display the right will display the modified option from the Registry Editor if grayed out in the startup type setting.

Further, check out our guide about how to fix disabled Registry editing by Administrator on Windows.

In conclusion, check our detailed guide about how to fix Windows can not start service on a local computer with easy steps.

Also, we have a complete guide on fixing Explorer.exe not starting on Windows startup on your PC. Before you go, you can check our guide on how to use services.msc to connect to another computer, so don’t miss it.

Rate Exceeded on Character Ai: How to Solve this Error

We have received several complaints regarding the Character AI rate exceeded error. This error prevents the platform from loading requests, rendering it unusable.

However, the rate exceeded error is not fatal but can be challenging to navigate and fix as it doesn’t have a specific cause. Fortunately, this article will outline some steps for resolving the error as you read through.

What causes the Character AI rate exceeded error?

Character AI may have certain restrictions on the number of requests or the speed at which requests can be made. It can vary per unit of time to ensure fair usage among all users and maintain the system’s stability.

Furthermore, a few factors may be responsible for the rate exceeded error while using Character AI. Some notable ones are below:

  • If you request an API at a rate higher than the specified limit, you can receive the rate exceeded error message as a response.
  • During peak usage, the API servers might experience heavy traffic from multiple users, leading to errors while processing requests.
  • Running multiple instances or threads making API calls can result in rate limits being reached faster.
  • A free trial or a limited plan with restricted API access can be responsible for reaching the rate limits sooner.
  • Server issues regarding the Character AI platform can cause the web app to malfunction and prompt the rate exceeded error.
  • The Character AI web app may not function as expected if its activities are impeded by extensions and plug-ins installed on your browser.

You should note that these factors are liable to vary depending on the circumstances of occurrence. Fortunately, you can resolve the problem by following the troubleshooting steps discussed in the next section of this article.

How do I resolve the rate exceeded error on Character AI?

Observe the following preliminary checks before advancing with any troubleshooting steps:

  • Close the Character AI web app, restart your browser, and relaunch it to see if the error persists.
  • Reboot your computer to resolve temporary glitches and processes interfering with the Character AI client’s performance.
  • Power cycle your modem or router to troubleshoot network-related issues or connect to a stable internet connection.
  • Limit the concurrent requests to stay within the rate limits if you run multiple threads making API calls simultaneously.
  • If you are on a free or a limited plan, consider upgrading to a plan that offers higher rate limits if your API usage demands it.
  • Try removing your browser extensions and see which is interfering with the AI web app.
  • Switch to another browser and check if it fixes the rate exceeded error that appears.
  • We recommend you check the server status to know if there are maintenance or server problems.

If the above steps can’t resolve the rate exceeded error while using Character AI, go ahead with the solutions below:

1. Clear your browser’s cache and cookies

  1. Launch Google Chrome, then click three dots to open the Menu. Click on More Tools and click on Clear browsing data.
  2. Choose a time range for the data to be cleared, then select All time to delete everything.
  3. Check the boxes for Cookies, other site data, and Cached images and files, then click Clear data.
  4. Restart the Chrome browser and check if Character AI starts working without running into the rate exceeded error.

Clearing browser caches and cookies will delete the corrupt files interfering with Character AI.

2. Logout and login your account

  1. Select your avatar or profile on the home page.
  2. Click on the Pencil icon to edit the profile in the new window.
  3. Navigate lower till you locate Logout, and click on it.
  4. Then, attempt to log in again.

Some users have claimed this solution worked for them. Hence, try this to gain faster access to the chatbot.

In addition, the simplest solution for the rate exceeded error is to wait until it is addressed officially. However, exceeding your rate on Character AI might be challenging to fix. So, you can contact Support for assistance.

Alternatively, you can review our detailed guide to discuss what to do if Character AI is not working. Besides, many users reported frequently encountering the Character AI network error, but our solutions will help!

We also have a guide on Internal server error 500 in Character AI, so don’t miss it for more information.

Should you have further questions or suggestions, kindly drop them in the comments section.

How to Show & Manage Tasks in Outlook Calendar

If you’re on a busy schedule, it’s important not to miss any important tasks or events. This is why many wonder how to show tasks on the Outlook calendar.

Missing an important event can be detrimental, so it’s essential to know how to manage your tasks in Outlook, and this guide will show you how to do it.

Why can’t I see tasks on the Outlook calendar?

  • Your default mail account isn’t the same account you’ve added tasks to.
  • Your tasks aren’t under the main tasks folder in Microsoft To Do or in Outlook in the web task pane.

Set the default calendar in Outlook

  1. Navigate to File and select Info.
  2. Now choose Account Settings and select Account Settings again.

  3. Next, navigate to the Data Files.
  4. Select the account you use for tasks and choose Set as default.

Did you know you can download Outlook calendar? Yes, and you can use this feature to export and transfer your data quickly.

How do I show tasks on the Outlook calendar?

Move them to the Calendar manually

  1. Open Outlook, or Outlook for Web.
  2. Select the Calendar icon from the left pane.
  3. From the top menu, select My Day and then To Do. Your task list will now appear.
  4. Locate the task that you want and drag and drop it to the desired slot on the calendar. This will create cards for calendars in Outlook that you can move around.
  5. Repeat this for all tasks that you want to show on Outlook Calendar.

This is all possible thanks to the Calendar Board feature in Outlook. If you want to learn more, we have a great guide on making Outlook calendar private, so be sure to check it out.

In case you prefer public calendars, check our guide on how to add a public folder calendar to Outlook.

Keep in mind that sometimes Outlook crashes when opening calendar, but we have a dedicated guide that can help you with that.

Integration with Microsoft To Do

Although Outlook and Microsoft To Do are integrated, this isn’t perfect, and there is a place for improvement.

Microsoft To Do is available in Outlook and can be accessed on both desktop and web versions. You can also create a task from an email and check it under To Do tab on Outlook.

For desktop:

  1. Open Outlook.
  2. Next, choose Tasks from the reading pane.
  3. You should see all your To Do tasks.

If needed, you can sort tasks by clicking on Tasks and selecting the Home drop-down menu.

For Web:

  1. Open Outlook for Web.
  2. Click on My Day.
  3. From there, you’ll be able to see and access all your tasks.

This can be quite useful since it allows you to create tasks, delete them and add them easily to your calendar. However, To Do doesn’t automatically add your tasks to the calendar, as many would think.

Instead, you have to manually do that for every task you want to add to your task list. This can be a good or a bad thing, depending on how you use it.

Keep in mind that you might encounter issues with the service because few have reported that Microsoft To Do is not syncing properly.

We love this method, but we hope there will be an option for a complete calendar and To Do synchronization.

As you can see, it’s easy to show tasks on the Outlook calendar, but unfortunately, you can’t automatically show all of your tasks. Instead, you will have to add them to your to-do list manually.

For those with multiple accounts, you can enable the view multiple calendars in Outlook feature to display all your tasks at once.

In case you want to learn more, we have a great guide on how to assign tasks in Microsoft To Do, so be sure to read it.

And if you ever change your mind and want to keep completed tasks tucked away, check out our guide on hiding completed tasks in Outlook.

Have you ever used Outlook with Microsoft To Do? Tell us more about your experience in the comments below.

How to Enable or Disable Data Execution Prevention

The Windows OS is user-friendly, though it comprises various features for advanced and professional users. The Data Execution Prevention (DEP) feature in Windows versions from XP Service Pack 2 to Windows 11 is one of them.

However, different people have been concerned about knowing what the data execution prevention feature is and whether to turn it on or off. Therefore, we will discuss DEP and how to enable or disable Data Execution Prevention on Windows PCs.

What is data execution prevention?

Data Execution Prevention (DEP) is a built-in security feature in Windows designed to protect your PC against malicious code execution. It divides your computer memory into two categories: executable and non-executable. Therefore, restricting specific memory areas from being executed as code.

The key features of DEP are:

  • Preventing malicious code execution
  • Restricts specific memory parts from being executed as code
  • Safeguard against buffer overflow and likely attacks
  • Protects against various types of malware and exploits
  • Enhances system security
  • It allows you to configure individual applications or the entire system.

Having discussed DEP and its key features, we will walk you through explicit steps to turn it on or off.

You can get a deeper explanation of how Data Execution Prevention works by reading this detailed DEP guide.

How do I enable data execution prevention?

1. Use Command Prompt

  1. Left-click the Windows icon, type CMD, and click Run as administrator.
  2. Then, select the Yes button if the UAC permission prompts.
  3. Copy and paste the following command and press Enter to enable DEP: bcdedit.exe /set {current} nx AlwaysOn 
  4. Also, to disable Data Execution Prevention, type this and press Enter: bcdedit.exe /set {current} nx AlwaysOff
  5. To check if DEP is enabled

Check our detailed guide on how CMD is not working in Windows 11.

2. Via Windows Settings

  1. Left-click the Windows icon and select Settings.
  2. Select the Privacy & Security category and click on Windows Security.
  3. Select the App & Browser control category. Navigate to the Exploit Protection section and click the Exploit Protection Settings link.
  4. Then, go to Data Execution Prevention (DEP) and click the drop-down arrow.
  5. Further, select the appropriate option to enable or disable DEP.

Note that the Data Execution Prevention will to DEP Default (ON) on your PC. You can read our complete guide about ways to fix Windows Settings not opening on your computer.

3. Use the Control Panel

  1. Press the Windows button, type Control Panel, and press Enter.
  2. Select the System and Security category, and click on System.
  3. Select the Advanced System Settings link from the right pane of the new window.
  4. Navigate to the Performance section and click the Settings button.
  5. Select the Data Execution Prevention tab from the top and click the Turn on DEP for essential Windows programs and services only radio button.
  6. Then, click the OK button and restart your PC.

The above steps allow you to turn on and off the Data Execution Prevention feature.

We have a detailed guide on what Control Panel is and how to use it on your computer. You may also check out our article on resolving Standard Hardware Security not supported on Windows 11.

Should you have further questions or suggestions, kindly drop them in the comments section.

How to Properly Fix a PC That’s Not Turning on [12 ways]

If your PC is not turning on even if you tried plugging it into another outlet and there isn’t any power outage in your area, that is usually caused by the power supply of your device.

Well, there can be multiple reasons why your computer is not turning on, which we will be discussing in this guide. Also, we will share with you the solutions that will help you fix your PC.

Why is my computer not turning on?

One of the common issues that could prevent your computer from turning on is the power supply. Chances are that the cable that you are using to power your computer is faulty.

For desktops, the internal power supply might be faulty or the battery is damaged in the case of laptops. Other times, there are issues with the display, where even though the computer is running, the display doesn’t show anything making us believe that the computer is dead.

You might be stuck in a boot loop or some sort of a BSoD (Blue Screen of Death) error that is preventing you to boot into your system.

Often it is also some issues because of the presence of malware or virus, or some important system files might be corrupt on your PC.

Your computer may also have loose components inside which are preventing it to turn on, or you have attached a faulty piece of hardware that is causing a premature shutdown.

Let us check out the different common reasons why your computer is not turning on and the solutions that can help you resolve that issue.

How can I troubleshoot my PC when it is not turning on?

1. Use a different power source

If you turn on your computer and nothing displays or absolutely nothing happens, then this could be a power failure issue.

In such cases, we would suggest you connect the computer’s outlet to a different source and then turn on your PC. Do not use the UPS and check if the different power outlet resolves your problem.

2. Replace the power cable

You can also try replacing the power cable that you are using to connect to the power source. Chances are it is faulty or worn out and isn’t delivering the required power to the PC, which is why your computer is not turning on.

We would also suggest you check the power sockets in your PC as some issues on it can also prevent perfect power delivery for the system to boot up.

3. Charge the laptop

If your computer is not turning on, then it could also mean that the battery is completely drained out. You can connect your PC to a power source and let it charge for a good 15-20 minutes.

After that, press the power button and check if this boots up the laptop or not. If that helps you resolve the problem, then you should ensure that your laptop has sufficient charge to avoid such issues.

4. Restart the PC multiple times

  1. Hold the power button to turn off the PC.
  2. Wait for about 10-20 seconds.
  3. Press the power button to turn on the PC.
  4. Repeat the process 3-4 times to fix the startup issue.

Perform the above steps and check if this helps you turn on your computer or not.

5. Connect your PC to a different display

Often the issue is not within the system but within the hardware that is connected to it. If your computer is having issues turning on, but you see that the light turns on when you press the power button, but nothing is displaying on your display, it could be a display issue.

Simply plug in your computer to a different display monitor and check if turning on shows any result on the display or not. If yes, then you should replace the display monitor and get yourself a new one.

For your convenience, we have a guide that compiles a list of some of the best monitors that you can buy. We have listed monitors from all top brands such as Asus, Acer, Dell, etc.

Moreover, if you are looking for a performance monitor for tasks such as gaming, or heavy editing, then we would suggest you take a look at our dedicated guide that lists some of the best performance monitors.

6. Unplug all connected devices

If you have connected an external hard disk, USB drive, USB keyboard/mouse, etc. devices to your computer, then we would suggest you unplug all of them from your computer and then try turning the PC without them.

When you unplug all these devices you eliminate all possibilities of malfunction caused by external devices. Also, if your computer detects an unsupported or faulty device, it will misbehave and cause such issues.

7. Check the motherboard light (Desktop only)

Unscrew the CPU cabinet and then turn on your PC. Check if the motherboard light blinks when you turn on your computer or not. If the motherboard light blinks, then the problem could be something else.

While it is pretty hard to detect what the problem is, at least you know that the motherboard isn’t at fault here.

8. Listen to the beep sound

Some motherboards generate beeping noise when they come across any issues or failures. If your computer produces multiple beep noises, then you should listen to them.

In case, the beep sound is in a particular sequence, register that sequence as they could sound like Morse code.

Check the user manual or search the internet about what that beep sequence means, and apply the solutions related to that beep noise. Do note that not all motherboards will generate a beeping noise.

9. Reset BIOS manually

  1. Turn off your PC and unplug it from the power outlet.
  2. Open the CPU case (if that action doesn’t void any warranty).
  3. Find the CMOS jumper. It will be located on your motherboard and is usually labeled with CLEAR, CLR, CLEAR CMOS, PSSWRD, or a variety of other labels.
  4. There will be three pins, and the jumper covers only two. Move the jumper to the other two pins. For example, if the jumper is attached to the first and second pins, move it to the second and third.
  5. Press the power button. Do note that your PC won’t start because the power is turned off. However, it will discharge any remaining power stored in the capacitors. Doing this resets your BIOS.
  6. Return the jumper back to its original state.
  7. Close the case, turn the power on, and start your computer.

When you reset the BIOS, your data will stay intact. If you have OS installed, it will stay there, however, some of the features may not work after you reset the BIOS.

Else, you can try updating the BIOS on your computer, which you can do by following the steps mentioned in our dedicated guide on how to update BIOS.

10. Replace the graphics card

Your computer not turning on could also be the result of graphics card failure. If you have a spare graphics card available, then you can try replacing it.

Do note that perform this process only when you know what you are doing as unplugging any other components could permanently damage your computer.

11. Check your hard drive

Multiple laptop or computer users have reported that they were not able to turn on their computers because their PCs were not able to read the operating system.

This is because they had a problematic hard disk drive or it was improperly connected to the motherboard.

In such cases, we would suggest checking the connections of your hard disk drive or using a new one (SSD would be great), and then try booting your computer.

For users experiencing slow speed with their SSD, we have a guide that explains how you can troubleshoot the situation and fix the SSD issue.

12. Reinstall the RAM

  1. Turn off the computer by pressing the power key.
  2. Disconnect the AC power source (for desktops).
  3. Open the cabinet and remove the RAM.
  4. Clean the RAM connection points and connect them back to the motherboard.
  5. Turn on your PC and check if this fixes the issue or not.

Sometimes loose RAM connection can also cause such issues where your PC won’t turn on. Follow the simple steps and check if this helps resolve the problem.

If nothing works, then as a last resort, we suggest bringing your computer to a verified service center and getting it repaired. The issue could be much worse than you might be thinking.

That is it from us in this guide. We have listed some effective solutions that will help you fix the 10 most common computer problems.

Feel free to let us know in the comments below, which one of the above solutions fixed the problem of the computer not turning on.

3 Ways to Download all Attachments from Outlook

As a professional user, downloading tons of attachments from the emails received in Outlook can be monotonous and time-consuming. 

Fortunately, you can easily download multiple attachments from one email in Outlook at once without having to hit the Save button for each of them. Furthermore, it is also possible to download multiple attachments present in multiple emails through a simple workaround. 

If you are curious to know the step-by-step procedure, stay with us as we guide you through the procedure.  

How do I download all attachments from an email?

1. Using the desktop app

  1. Launch the Microsoft Outlook app on your Windows PC.
  2. Look for and open that email in the reading pane from which you download the attachments.
  3. Switch to the Attachments section from the top menu bar, right-click one of the file attachments in the right section, and select Save all attachments in the drop-down menu. 
  4. Press the Ctrl key and select all the attachments you wish to download in the small dialog box that opens. 
  5. Press the OK button after selecting the required attachments. 
  6. A new Save as pop-up to save your attachments will open. Browse to the folder where you want to save the attachment files and press the OK button on the bottom right to initiate the attachment download. outlook download all attachments

You can easily download all the files attached to an email at once instead of downloading each file individually. 

2. Using the web app

  1. Access the Microsoft Outlook web app using your preferred web browser and provide your login credentials when prompted to sign in. 
  2. Select the Inbox folder from the left menu bar in the Home section of the web app. outlook download all attachments
  3. Double-click the email in question to view the email contents in a new window. 
  4. Click the Download all button to download the attachments in the form of a ZIP file. outlook download all attachments
  5. Choose the download location and press the OK button if the Save as the dialog box opens up. 

This is a straightforward method to download all the email attachments from one email if you prefer the web app instead of the Outlook app. 

How do I download all attachments from multiple emails?

Note icon NOTE
You can try this method only if you are using Outlook 2019, 2016, 2013, 2010, 2007, or 2003.

1. Create a new folder

  1. Use the Windows + E shortcut to launch File Explorer. 
  2. Navigate to the Documents folder from the left sidebar.
  3. Right-click anywhere on the right section and choose New followed by Folder from the context menu. outlook download all attachments
  4. Double-click the folder name and rename it as Attachments.

2. Create a VBA script

  1. Now launch the Outlook app on your Windows PC. 
  2. Choose the File option and then select Options from the left sidebar. 
  3. Select Customize Ribbon from the left panel of the Word Options window. outlook download all attachments
  4. Select the Developer option in the Main Tabs and press the Plus icon to add Developer mode to the Outlook ribbon menu. 
  5. Close the Word Options popup and then select Developer Mode followed by Visual Basic from the main menu. 
  6. Select Project1 displayed as default and then select Insert followed by Module to access the Module window. 
  7. Now copy and paste the following code into Module1 and close the window. 
Dim GCount As Integer
Dim GFilepath As String
Public Sub SaveAttachments()
'Update 20200821
Dim xMailItem As Outlook.MailItem
Dim xAttachments As Outlook.Attachments
Dim xSelection As Outlook.Selection
Dim i As Long
Dim xAttCount As Long
Dim xFilePath As String, xFolderPath As String, xSaveFiles As String
On Error Resume Next
xFolderPath = CreateObject("WScript.Shell").SpecialFolders(16)
Set xSelection = Outlook.Application.ActiveExplorer.Selection
xFolderPath = xFolderPath & "\Attachments\"
If VBA.Dir(xFolderPath, vbDirectory) = vbNullString Then
    VBA.MkDir xFolderPath
End If
GFilepath = ""
For Each xMailItem In xSelection
    Set xAttachments = xMailItem.Attachments
    xAttCount = xAttachments.Count
    xSaveFiles = ""
    If xAttCount > 0 Then
        For i = xAttCount To 1 Step -1
            GCount = 0
            xFilePath = xFolderPath & xAttachments.Item(i).FileName
            GFilepath = xFilePath
            xFilePath = FileRename(xFilePath)
            If IsEmbeddedAttachment(xAttachments.Item(i)) = False Then
                xAttachments.Item(i).SaveAsFile xFilePath
                If xMailItem.BodyFormat <> olFormatHTML Then
                    xSaveFiles = xSaveFiles & vbCrLf & "<Error! Hyperlink reference not valid.>"
                Else
                    xSaveFiles = xSaveFiles & "<br>" & "<a href='file://" & xFilePath & "'>" & xFilePath & "</a>"
                End If
            End If
        Next i
    End If
Next
Set xAttachments = Nothing
Set xMailItem = Nothing
Set xSelection = Nothing
End Sub

Function FileRename(FilePath As String) As String
Dim xPath As String
Dim xFso As FileSystemObject
On Error Resume Next
Set xFso = CreateObject("Scripting.FileSystemObject")
xPath = FilePath
FileRename = xPath
If xFso.FileExists(xPath) Then
    GCount = GCount + 1
    xPath = xFso.GetParentFolderName(GFilepath) & "\" & xFso.GetBaseName(GFilepath) & " " & GCount & "." + xFso.GetExtensionName(GFilepath)
    FileRename = FileRename(xPath)
End If
xFso = Nothing
End Function

Function IsEmbeddedAttachment(Attach As Attachment)
Dim xItem As MailItem
Dim xCid As String
Dim xID As String
Dim xHtml As String
On Error Resume Next
IsEmbeddedAttachment = False
Set xItem = Attach.Parent
If xItem.BodyFormat <> olFormatHTML Then Exit Function
xCid = ""
xCid = Attach.PropertyAccessor.GetProperty("https://schemas.microsoft.com/mapi/proptag/0x3712001F")
If xCid <> "" Then
    xHtml = xItem.HTMLBody
    xID = "cid:" & xCid
    If InStr(xHtml, xID) > 0 Then
        IsEmbeddedAttachment = True
    End If
End If
End Function

3. Run the VBS script

  1. Switch to the Developer Mode and then select Visual Basic from the Outlook ribbon. outlook download all attachments
  2. Select Module1 and hit the F5 key to run the code. 
  3. Click the Save Attachment button after selecting the attachments to confirm the action. 

VBA scripts enable you to automate the attachment download process in Microsoft Outlook. However, you should proceed carefully with the VBA scripts to avoid damaging your computer.  

That’s all in this guide! Hope you are aware of the different ways you can easily download all email attachments from the Microsoft Outlook app. 

If you run into the Something went wrong error in the Outlook app, try the solutions suggested in this guide. 

If you have any queries, or you know about other methods, let us know in the comments section. 

Fix: You’re Offline Check Your Connection Error on YouTube

Have you recently encountered You’re offline. check your connection error on your device while using YouTube? The error is becoming a menace preventing most users from accessing YouTube’s content.

Hence, there’s a need to look into some ways to fix the problem and get YouTube working on your device again. Thus, explore this guide to find some steps for resolving the connection error.

Why does YouTube keep saying you’re offline check your connection?

  • Weak internet connection or network congestion can affect connection to the YouTube servers.
  • Network restrictions or firewall settings might impede access to YouTube, causing the error message to appear.
  • Domain Name System (DNS) problems can cause the device to be unable to resolve YouTube’s server addresses.
  • If YouTube servers are experiencing downtime or issues, it can result in a connection error message.
  • Caches and cookies in the browser or app can affect YouTube when corrupted and hinder proper access.
  • Using an outdated version of the YouTube app can sometimes cause connectivity issues.

However, the above causes are general and can sometimes vary on several devices. This variability makes determining which factors are responsible for the error tedious. Fortunately, we have put together some general fixes for resolving the problem.

How do I fix You’re offline, check your connection error?

Before anything, we recommend you observe the preliminary checks below:

  • Power cycle your network devices and connect to a fast internet network to help YouTube connect to its servers.
  • Restart your device to help resolve temporary connectivity issues and try accessing YouTube again.
  • If you are connected to any VPN service, disconnect, and relaunch YouTube.
  • Disable background apps or others on your computer and disable any firewall service impeding YouTube connections.

If the steps above can’t fix the You’re offline; check your connection error when using YouTube, go ahead with the advanced fixes below:

1. Change your DNS server address

  1. Press Windows + R key to open the Run dialog box, type ncpa.cpl, and press Enter to open the Network Connection page.
  2. Right-click your network adapter and select Properties from the drop-down.
  3. Select Internet Protocol Version 4 (TCP/IPv4) and click Properties.
  4. Tick the box for the Use the following DNS server addresses option, type 8.8.8.8 in the Preferred DNS server, and 8.8.4.4 for the Alternate DNS server, then click OK to save settings.
  5. Restart your PC, then check if the YouTube connection error persists.

Changing your DNS server address can help fix network issues, and the You’re Offline. Check Your Connection problem.

Read our article about checking and changing the DNS server on Windows if you’re having trouble with the steps above.

2. Check your date and time settings

  1. Right-click the date and time on the Taskbar, and click Adjust date and time settings.
  2. Toggle off the set time automatically, and click the change button beside set the date and time manually.
  3. Adjust the settings manually and click on the change button to save.
  4. Further, click on the Sync now button.
  5. Restart your PC and check if YouTube works.

Adjusting the date and time is one of the tested and most effective ways to fix YouTube connection problems.

3. Clear browser cache and cookies

  1. Open the browser and click the Menu option. Select More Tools and click on Clear browsing data.
  2. Select All Time from the Time range at the top, check the boxes next to Cookies and other site data, and the Cached images and files option. Then, click on Clear data.
  3. Relaunch the browser and check if the error persists.

Clearing the browser cache and cookies will remove all corrupt or malicious pre-store data and refresh the website. Further, you can also clear your computer cache in Windows 11.

4. Remove third-party extensions

  1. Open the browser and click the Menu option. Select More Tools and click on Extensions.
  2. Toggle off each Extension and check if the error persists.
  3. Repeat this process for all Extensions to find the one causing the error.
  4. Click Remove on the problematic extensions once figured out.

Removing the browser extensions will fix issues with ad-blocker and other extensions, causing You’re Offline. Check Your Connection error. You can read step-by-step details to view browser extensions on your device.

Alternatively, you can go through our guide on fixing an error that occurred on YouTube on your PC.

Should you have further questions or suggestions, kindly drop them in the comments section.

Fix: Clock_Watchdog_Timeout BSOD in Valorant

Though Windows has emerged as a preferred gaming platform, issues continue to plague the operating system. Game crashes and FPS drops are the simpler ones. But the Clock Watchdog Timeout BSOD while playing Valorant is a rather tricky problem.

There’s not much users can do when faced with the error, given the lack of troubleshooting measures suggested by Windows or the game. And the worst part, it leads to a loss of in-game progress. Keep reading to find out how to fix Clock Watchdog Timeout when playing games!

What causes Clock Watchdog Timeout?

The error indicates a problem in the communication between the system and the CPU. When the relay of information takes too long or the process is abruptly terminated, you see the Clock Watchdog Timeout. Here are a few reasons you are seeing the BSOD error:

  • Misconfigured settings: The primary reason users face the error is misconfigured settings, both in-game and on Windows.
  • Outdated drivers: Some users reported that the problem was linked to outdated drivers. It was different for them all, could be the drivers for GPU, controller, or another device.
  • Corrupt system files: For a few, it was the corrupt system files that affected the relay of information and, subsequently, triggered the BSOD.
  • Overclocking in play: Even a trivial issue or misconfiguration can cause an error when the PC is overclocked.
  • Third-party apps: There’s also the likelihood that another program is the problem. Some reported it to be Vanguard’s anti-cheat, while others found security software responsible for the error.

How do I fix Clock Watchdog Timeout BSOD when playing Valorant?

Before we move to the slightly complex solutions, here are a few quick ones to try:

  • Remove any overclocking. In case you are using an overclocking program, uninstall it.
  • Make sure your CPU gets the required power.
  • Update the BIOS.
  • Reset the BIOS. A quick way to do that is to remove the CMOS battery. If unsure of the process, check the manufacturer’s website.
  • Update Windows in case there are any newer versions available. Also, when the Valorant BSOD Clock Watchdog Timeout appears after updating the OS, uninstall recent Windows versions.

If none work, head to the fixes listed next.

1. Update the driver

  1. Press Windows + X to open the Power User menu, and select Device Manager.
  2. Expand the Display adapters entry, right-click on the graphics adapter, and select Update driver.update driver to fix Clock Watchdog Timeout Valorant BSOD
  3. Now, choose Search automatically for drivers and wait for the process to complete.search automatically
  4. Once done, restart the computer.

Driver issues, particularly corrupt or outdated graphics drivers, trigger a range of errors and also affect the system’s performance. Updating the graphics driver should fix Clock Watchdog Timeout Valorant BSOD in no time!

If Windows can’t find a newer version, you can always go to the manufacturer’s website and manually install the driver. Here are the links to the download pages:

If the problem reappears after updating the drivers, Windows is likely to install the problematic version. So, we recommend that you disable automatic driver updates.

2. Repair the corrupt system files

  1. Press Windows + R to open Run, type cmd, and hit Ctrl + Shift + Enter.
  2. Click Yes in the UAC prompt.
  3. Paste the following three commands one at a time, and hit Enter after each:DISM /Online /Cleanup-Image /CheckHealth DISM /Online /Cleanup-Image /ScanHealth DISM /Online /Cleanup-Image /RestoreHealth
  4. Now, execute this command to run the SFC scan:sfc /scannowsfc scan to fix Clock Watchdog Timeout Valorant BSOD

If it’s the corrupt system files to blame for Clock Watchdog Timeout in Windows 10 while playing games, running the DISM tool and SFC scan should get things up and running!

On the other hand, it’s more beneficial to rely on a tailored PC repair solution that offers BSoD crashes support and solves damaged system files automatically on your Windows device.

3. Check for disk issues

  1. Press Windows + S to open Search, type Command Prompt in the text field, and click on Run as administrator.
  2. Click Yes in the prompt.
  3. Run the following command to identify and repair disk issues:chkdsk /rcheck disk
  4. If asked to run the scan on the next reboot, hit Y, press Enter and then restart the computer.

The Check Disk utility helps repair hard drive issues, including bad sectors. This ensures that all available game files are accessible and readable, and that the disk doesn’t trigger the Clock Watchdog Timeout Valorant BSOD.

4. Uninstall conflicting programs

  1. Press Windows + I to open Settings, go to Installed apps from the navigation pane, and click on Apps.
  2. Now, click the ellipsis next to the problematic apps, and select Uninstall.uninstall
  3. Again, click Uninstall in the confirmation prompt.

When the Clock Watchdog Timeout Valorant blue screen of death appears due to a conflicting program, it’s best that you uninstall the app. Here are a few apps reported to trigger the error:

  • MSI Afterburner
  • Valorant Anti-cheat
  • Third-party antivirus

5. Reinstall Valorant

  1. Press Windows + R to open Run, type appwiz.cpl in the text field, and click OK.
  2. Select Valorant from the list of programs, and click Uninstall.uninstall Valorant to fix Clock Watchdog Timeout Valorant BSOD
  3. Follow the on-screen instructions to complete the process, and then restart the PC.
  4. Finally, reinstall Valorant.

When faced with the error, we can’t rule out the possibility of an improper Valorant installation causing the Clock Watchdog Timeout BSOD error. And reinstalling the game should fix things in no time!

6. Perform an in-place upgrade

Tip icon Tip
The steps listed here are for Windows 11. Though, using similar steps, you can perform an in-place upgrade on Windows 10.
  1. Go to Microsoft’s official website, choose the product language and edition, then download the Windows 11 ISO.
  2. Open the ISO, and then run the setup.exe file.setup.exe
  3. Click Yes in the prompt.
  4. Click Next to proceed.next
  5. Now, click on Accept to agree to the license terms.
  6. Verify that the setup reads, Keep personal files and apps, and click on Install to start the process.in-place upgrade to fix Clock Watchdog Timeout Valorant BSOD
  7. Wait for the in-place upgrade to complete. It may take a few hours.

When everything else fails, the last option is to perform an in-place or repair upgrade. It will replace all Windows files, which could be leading to the Clock Watchdog Timeout Valorant BSOD error.

Tip icon Tip
If none of the above solutions worked, a hardware issue is likely triggering the BSOD. It could be both the RAM and the CPU. And we advise that you contact a repair shop to get the hardware inspected and, if required, repaired.

Before you leave, discover some quick tips to optimize the PC for gaming and get it to perform faster. We also have a new guide on Cluster Csv Clussvc Disconnect Watchdog error, so don’t miss it.

For any queries or to share the solution that worked for you, drop a comment below.

DirectX 12 Games Are Not Using the GPU? How to Force Them

So you just got yourself the best graphics card money can buy. But wait. There’s a problem. Your DirectX 12 games register low GPU usage. If you’re a gamer, you know there’s nothing as bad as your graphics card not running at full potential.

According to user reports, the GPU usage is missing or extremely low. If you’re in a similar situation, here’s how to ensure your GPU utilizes all its resources.

Why are my DirectX 12 games not using my GPU?

If you’re trying to play a game that uses DirectX 12 and your graphics card isn’t being used, below are the most common reasons why:

  • Multiple graphic cards – If you have both a dedicated and integrated GPU, your games may be opting to use your other GPU.
  • System requirements – It is possible that your GPU isn’t being used because it doesn’t meet the minimum requirements for running the specific DirectX 12 game you’re trying to play.
  • Outdated graphic drivers – If you are running a game built on DirectX 12, and your GPU drivers are outdated, then this may be why your game isn’t utilizing the GPU to its full potential.
  • GPU can’t be detected – At times, your PC cannot detect your GPU either because of faulty drivers or because it has been damaged.
  • Games don’t use the GPU – You must know that not all games require the GPU to run. If a game is not using the GPU, this should not be a cause for alarm.
  • Insufficient power – It is also possible that the game you’re trying to play needs more power than your current GPU can provide hence shifts the burden on other system resources like your CPU.
  • Older hardware – Most older hardware does not work with DirectX 12. There’s no magic around it, and in most cases, it requires a new graphics card or updated drivers.
  • Outdated OS – If your PC has not been updated or you’re one of those people who’ve disabled updates permanently, this is one of the consequences of your choices.

How do I know if my GPU supports DirectX 12?

If you have a relatively recent graphics card, your GPU should support DirectX 12. However, this is not the benchmark for DirectX 12 support. A more sure way of determining this is using the built-in Windows DirectX Diagnostic Tool:

  1. Hit the Windows + R keys to open the Run command.
  2. Type diaxg in the search box and hit Enter. 
  3. In the DirectX Diagnostic Tool window that opens, navigate to the System tab.
  4. Here, you can see what version of DirectX is supported by your PC under System Information.

How do I get my graphics card to support DirectX 12?

Ensure you fulfill the following prerequisites before anything else:

  • Check the system requirements for the game against those of your PC and ensure it is up to par or exceeds them.
  • Ensure your Windows version is up-to-date.
  • Check that the game you’re playing is the latest version available.

1. Reinstall your drivers offline

  1. Use our article on how to download drivers offline, preferably the one where you download and copy the drivers to a USB hard drive.
  2. Disconnect your PC from the Internet.
  3. Hit the Windows key, type Device Manager in the search bar, and click Open.device manager w11
  4. Navigate to the Display driver section, locate your graphics card driver, right click and select Uninstall device.Uninstall graphics driver dcom error 1084
  5. Repeat this step for Processors and Chipset drivers too. Remember not to restart your PC when prompted.
  6. Now restart in BIOS mode.
  7. Proceed to update your PC’s BIOS.
  8. Next, install the corresponding drivers as saved in your USB drive as uninstalled in step 4.

2. Enable hardware acceleration

  1. Hit the Windows key and select Settings.settings windows 11
  2. Click on System on the left pane, then Display on the right pane.Settings - System - Display High CPU usage New World
  3. Scroll down and select Graphics.
  4. Select the Change default graphics settings option.
  5. Now, toggle on the Hardware-accelerated GPU scheduling option.disable Hardware-accelerated GPU scheduling

3. Disable your integrated GPU

  1. Click on the Start Menu icon, type Device Manager in the search bar, and click Open.device manager w11
  2. Navigate to Display adapters to expand, right-click on your graphics card, and select Disable device.
  3. Next, launch your dedicated graphics card control panel (In this case, Nvidia Control Panel).
  4. Select Manage 3D settings from the navigation pane on the left.manage 3d settings in nvidia.
  5. Choose a High-performance NVIDIA processor from the Preferred graphics processor dropdown menu.

Users were quick to tell us that the low GPU usage with DirectX 12 games registered in Task Manager was inaccurate. Task Manager is not considered an accurate performance monitoring tool.

All this could be true, but you can always verify these claims by seeking a second opinion. We have an excellent library of other performance monitoring tools to inform you of your GPU usage.

If the GPU is showing 0 in the Task Manager and a different figure in another platform, you can relax. However, if the results concur, the above methods are sufficient to help you ensure your GPU is not underutilized.

And that’s pretty much it. Don’t hesitate to reach out using the comment box for any additional suggestions or clarifications.

How to Mail Merge from Microsoft Outlook

Sometimes you need to send bulk emails, which is why many want to know how to mail merge from Microsoft Outlook.

This is a rather useful technique since it allows you to send personalized mass emails to multiple recipients.  So today, we’re going to show you how to use this feature properly.

What is a mail merge?

  • Mail merge in Outlook is a process of sending bulk emails, but each email is personalized according to its recipient.
  • This is achieved through placeholders, and each placeholder can utilize the data from the Excel table to customize emails.
  • By doing so, you can send personalized emails to multiple email addresses and perform email campaigns.
  • Each recipient will get a somewhat unique email message specially tailored to him.
  • Using this feature, you can send bulk emails and save time while having each email personalized according to its recipient.

What are the benefits of personalized emails?

  • By writing personalized emails, you will appear more trustworthy to your clients.
  • Personalized emails will also boost the engagement rate.
  • Your recipients might also feel more valued since they won’t get the same generic emails.

What are the fundamental steps of mail merge?

  • Creating an email template with placeholders.
  • Creating a spreadsheet or database with the necessary information.
  • Linking the email template with the database.
  • Sending bulk emails to multiple email addresses.

How do I do a mail merge in Outlook?

1. Prepare the email template in Microsoft Word

  1. Open Word and create a new document.
  2. Navigate to the Mailings tab and choose Start Mail Merge. Lastly, select E-mail Messages.
  3. Now enter your message and place the placeholders at the desired locations. Placeholders are represented by curly brackets.

Speaking of templates, many reported Do you want to save changes to the document template in Word, but if you encounter this issue, we have a special guide for it.

2. Set up placeholder data in Microsoft Excel

  1. Open Excel and create a new sheet.
  2. You’ll need to create several columns. For practical reasons, use the names you used as placeholders for column headers.
  3. Make sure to create an Email column that contains all the addresses of your recipients.
  4. Fill in your data.
  5. After doing that, save your file.

Before saving, you might want to check our XLS vs XLSX guide to learn more about different Excel formats.

  1. Go back to Word.
  2. Next, go to the Mailings tab. Choose Select Recipients and then select Use an Existing List.
     
  3. Now select the xls file that you created in the previous section.
  4. Check the First row of data contains column headers and click OK.
  5. Now select your placeholder and choose Insert Merge Field. Select the appropriate field that matches the placeholder name.
  6. Repeat this for all placeholders.

After doing that, let’s preview our emails.

4. Preview your mail merge

  1. In the Mailings tab, click on Preview Results.
     
  2. You should now see how your email message will look using the data from the Excel file.
  3. You can use the arrow keys to check different messages and their data.

5. Send the messages

  1. In Word, click on Finish & Merge and select Send Email Messages.
     
  2. In the To field, select your Email column. Next, enter the desired Subject line. Lastly, set Send records to All.
  3. Click OK to save the merge.
  4. Go to Outlook and open the Outbox folder.
  5. Lastly, click on Send/Receive All Folders and wait for your emails to send.

 As you can see, it’s pretty simple to perform a mail merge process using the Office software.

By using this feature, you can circumvent the too many recipients error message in Outlook, so be sure to try it.

Where is mail merge located in Outlook?

The mail merge feature isn’t available in Outlook. Instead, it’s performed using Word, Excel, and Outlook.

Firstly, you need to create your email template in Word and add your data to an Excel sheet. After you link the two, you link the email template with Outlook.

This will cause all emails generated from the template to appear in the Outbox folder in Outlook, and you can send them from there.

If you ever wanted to know how to mail merge from Microsoft Outlook, this is the best and the simplest way to do it.

Keep in mind that this feature might not work if the Outlook data file cannot be accessed or if This file is in use message appears.

In case you’re looking for something more advanced, why not use CRM email marketing software instead?

Lastly, don’t miss our latest guide on how to mail merge from Excel to Word for more information about this process.

Did you ever use mail merging? If so, tell us about your experience in the comments section below.

5 Best Server Hosting for Pixelmon [Quick Guide]

If you like Minecraft and Pokémon, then the Pixelmon mod for Minecraft is the ultimate mod to have. It adds all the Pokemon-related items and mobs to your Minecraft game.

So, whether you want to catch your favorite Pokémon or fight against the one you dislike the most, you can do it all with Pixelmon mod. So, which is the best server hosting for Pixelmon?

The good thing about Minecraft is that it allows you to choose between different servers whenever you want. And if you want to play Pixelmon, you will need a fast server to host the game.

In this guide, we have listed the best server hosting for Pixelmon Minecraft mod. So let’s get started.

What is the best server hosting for Pixelmon?

Apex Hosting – Great plug-ins

best server hosting for Pixelmon

Apex Hosting offers a simple way to create Minecraft servers. It hosts over 300,000 Minecraft servers with high-clock speed CPUs and SSD storage powering the lag-free server.

With Apex Hosting, you can install and play the best mod packs with a single click. It also offers DDoS protection, low latency due to the data center worldwide, and instant setup. There are some premade game types like Factions, McMMO, Capture the Flag, and more.

You can combine your own mods or try other popular mod packs from Feed the Beast, ATL, Voice, Wrath, Technic. Included plugins such as Essentials, World Edit, and more to use.

Other features offered by Apex Hosting include the ability to generate a new map with any seed you want or use premade worlds, a control panel to manage your server, and resources to customize your game.

Key features of Apex Hosting:

  • Support for Essentials, World Edit, and more plugins 
  • 100+ available modes
  • Premade mini-games
  • Free subdomain, automated backups, and control panel 
Apex Hosting

Apex Hosting

Easily create, manage and edit your Pixelmon servers with this amazing software today.
Check priceVisit website

Shockbyte – Very affordable

Shockbyte is another popular Minecraft hosting with affordable plans and easy upgrading options. Similar to Apex Hosting, it also comes with DDoS protection, 100% uptime, free subdomains, MCPS, MCPE cross-compatibility, etc.

All the Minecraft hosting from the company support Java Edition and Bedrock Edition with one-click install, with an automatic update system. Some of the Minecraft server versions supported include Spigot, CraftBukkit, Forge, Sponge, BungeeCord, Vanilla, and Snapshots.

Additionally, all the Minecraft servers are hosted with Shockbyte support mod packs such as Feed the Beast, Technic, ATLauncher, and more. If you want to install a custom mod pack, you can access the server via the control panel to upload Minecraft server types.

Key features of Shockbyte:

  • Support almost all the mod packs and custom mods
  • Custom JAR support 
  • Full FTP access and control panel 
  • Java version switcher 
Shockbyte

Shockbyte

Take advatange of the features of Shockbyte while easily managing your Pixelmon servers today!
Check priceVisit website

Host Havoc – DDoS protection

If you are looking for a host that offers a vast range of servers, Host Havoc is an excellent choice. It offers all the features of major Minecraft servers, including 99% uptime, instant setup, fast SSD storage, DDoS protection, and high-speed CPU processors. 

Host Havoc offers offsite backup that contains all your configuration, content, and databases. It also supports 400+ different apps, including WordPress, Joomla, Magneto, Drupal, X Mod, MyBB with a single click. 

The control panel offers access to File Transfer Protocol, Multiple PHP versions, configure modules, and view statistics and errors.

Key features of Host Havoc:

  • Automatic mod pack installer 
  • Scheduled backups 
  • DDoS protection and FTP access 
  • Works with all modpacks
Host Havoc

Host Havoc

Explore the wonderful world of Pixelmon on a stable server with this great software.
Check priceVisit website

ScalaCube – Easy to start a server

ScalaCube specializes in game server hosting, including Minecraft. Some of the servers offered by the host include BedRock, PocketMine, and Nukkit. Using the control panel, you can easily make your own Minecraft server. 

Apart from multiple pocket edition servers, you also get a pre-installed and configured website and forum to monitor active players on the server. The servers support over 13 mini-games, such as SkyWars, TnTRun, and others.

Additionally, features by ScalaCube include Free MySQL, Plugin/Mod support, modpack support, custom PHAR and JAR, a custom launcher, and a backup system.

Key features of ScalaCube:

  • Unlimited slots and multiple servers
  • Free DDoS protection 
  • Full File Access and Control Panel
  • Plugin, modpack, BungeeCord support 

⇒ Get ScalaCube

Aternos – Free server

If you are just getting started with the Minecraft server, Aternos offers free Minecraft servers. It offers a personal Minecraft server that you can set up to play with friends without any unnecessary limits.

Aternos servers include a fully customizable server, mods and plugins support, DDoS protection, automatic backups, the ability to add adventure maps, parkour or the latest mini-games and customer support. 

Aternos supports Java Edition games that include Vanilla, Snapshots, Paper/Bukkit, Spigot/Bukkit, GlowStone, etc. There are also Bedrock Edition games, such as BedRock and Pocketmine.

Key features of Aternos:

  • You can create your free SMP
  • Custom domain and share access
  • Unlimited slots 
  • Add-ons and data packs with real-time console

⇒ Get Aternos

So, these are some of the best server hosting for Pixelmon Minecraft mod. While the free servers are good for absolute beginners, paid solutions have no-nonsense unlimited access and better support, speed, and lag-free experience.

What is your favorite server hosting for Pixelmon mod or Minecraft? Let us know in the comments.

What is Error Code 53 in Steam & How to Quickly Fix it?

Some of our readers get the message The Steam servers are too busy to handle your request for [game title]. Error code (53) when trying to launch a game on the Steam app. 

This error code usually occurs for newly released games and restricts the user from accessing the game he intends to play and may even disrupt the online multiplayer sessions abruptly. 

If you are struggling with the same problem in Steam, try the solutions listed in this guide. 

Why do I get the error code 53 in Steam?

Below are the possible causes why you encounter the error code 53 when launching games on the Steam app: 

  • Server overload – Steam servers may not be able to handle requests when there is heavy traffic during game release. 
  • Misconfigured network settings – Incorrect network settings often lead to connectivity issues which cause problems in connecting to the game server. 
  • Server outage – Temporary server outage for maintenance purposes may also throw the error code 53 when you try launching or updating a game. 
  • Conflicting third-party apps – Third-party antiviruses and firewalls often restrict your system requests citing security purposes.

Now that you are aware of the possible reasons for the Steam error code 53, let’s proceed to check out the solutions.

How do I fix the error code 53 in Steam? 

You are recommended to try these simple workarounds which have worked for several users before proceeding to move complex solutions. 

  • Restart your computer to fix the trivial bugs in the system. 
  • You can visit the official Steam status page to check whether there is a Steam server outage.
  • Switch to a more reliable internet connection, such as a mobile hotspot, and try again. 
  • Enable a VPN service, such as Private Internet Access (PIA), to access the geographically restricted games in your location. And if you’re using a VPN while receiving this error message, try turning it off temporarily.

If you still run into the Steam error code 53 when launching or updating a game, try the solutions listed below. 

1. Temporarily disable real-time protection

  1. Launch the Settings app using the Windows + I key combination.
  2. Switch to the Privacy & security settings from the left sidebar and then choose the Windows security option from the right side. Steam error code 53
  3. Next, choose the Virus and threat protection option. Steam error code 53
  4. Click the Manage settings option located under the Virus and threat protection settings section.
  5. Toggle Off the switch for the Real-time protection feature. Steam error code 53

Windows Defender often blocks the game executable files considering them to be suspicious, thus the error code 53 in Steam. Disabling the real-time protection settings will ensure that Windows Security does not restrict the game from contacting the server. 

In case you have a third-party antivirus installed, you can disable it as well during the game sessions.

2. Allow games through Windows Firewall 

  1. Press the Windows key to launch the Start menu, type control panel in the search bar, and press Enter to quickly access the Contol Panel. Steam error code 53
  2. Select Category in the View by drop-down on the top right corner and select System and Security option. Steam error code 53
  3. Select the Windows Defender Firewall option. 
  4. Select the Allow an app or feature through Windows Defender Firewall option located on the left sidebar. Steam error code 53
  5. Press the Change settings button. Steam error code 53
  6. Scroll down the list of apps and look for the game EXE file. If the file missing, click the Allow another app button. 
  7. Browse to the location of its installation folder on the next popup, select the .EXE file, and press the Add button. 
  8. Select the checkboxes listed under the Private and Public options and hit OK to save the changes. Steam error code 53

You may get the error code 53 when launching the games if the Windows firewall is preventing the executable file of the game from launching successfully on the Steam app. So allowing the EXE game files should fix the problem.

If you’re using a third-party firewall, use its settings to include this exception as well, or disable it temporarily.

3. Reset the network settings 

  1. Bring up the Settings app using the Windows + I shortcut keys. 
  2. Choose Network and internet option from the left sidebar and then select the Advanced Network settings option from the right. Steam error code 53
  3. Scroll down to the More settings section and click the Network reset option. 
  4. Finally, press the Reset Now button located on the new page. Steam error code 53

As described on different forums, misconfigured networking settings often interfere with the launch of the games on the Steam app. Resetting the network settings will restore the networking components to their default values so that you do not get the error code 53 in Steam. 

4. Change the download region 

  1. Launch the Steam app on your Windows PC. 
  2. Select the Steam option on the top menu bar and then the Settings option from the drop-down menu. Steam error code 53
  3. Select the Downloads option from the left sidebar. 
  4. Expand the Download Region drop-down and select a different region. Steam error code 53
  5. Save your changes and then restart Steam to see whether or not error 53 shows up during the game launch. 

There may be some server issue in the current download region for which your request is not being processed by it. Changing the download region should improve the download speed and resolve the latency issues.

There you go! The Steam error 53 error should now be resolved so that you can enjoy your favorite games. 

In case you encounter an error in initializing and updating the transaction, refer to this guide for possible solutions.

If you have any queries, feedback, or comments for us, do let us know in the comments section. 

Driver Update keeps Popping up? Stop it in 5 Simple Steps

Usually, Windows downloads and installs the latest drivers for your PC. However, if you keep a Driver Update prompt keeps popping up, especially from Slimware Utilities, that might be adware causing troubles.

Sometimes, this message comes from an app called Driver Update. Irrespective of the format it takes, you can stop it for good with the solutions in this guide.

Why do I keep getting Driver Update popups?

The reasons you keep getting popups to update your driver are within a close circle. Below are the notable ones:

  • Presence of adware on your PC – The most prominent cause of this issue is the presence of adware on your PC. You might have unknowingly installed the software while downloading an app from a third-party website. You need to perform a malware scan on your PC to remove any unwanted apps.
  • Driver Update redirect on your browser – In some cases, this solicitation can keep showing up on your browser because you once visited the site. This is because the malicious website has already added a redirect link to your browser. You might need to reset your browser to fix this.

How do I stop the driver update prompt from popping up?

1. Uninstall Driver Update and other software

  1. Press the Windows key + R, type appwiz.cpl, and click OK.
    appwiz driver update keeps popping up
  2. Right-click the Driver Update or any other Slimware Utilities apps.
  3. Finally, select Uninstall and follow the onscreen instructions to remove it.
    uninstall

The first thing to do if the Driver Update message keeps popping on your PC is to remove the app causing it. According to users, the pop-ups come from either the Driver Update or any other Slimware Utilities app.

So, you need to remove these apps and other unwanted software.

2. Perform a malware scan

  1. Press the Windows key + S, type virus, and select Virus & threat protection.
    virus
  2. Click the Scan options link.
    scan options driver update keeps popping up
  3. Finally, choose the Full scan or Microsoft Defender Offline scan option and click Scan now.
    scan now

If you can’t remove the problematic app or the Driver Update request keeps popping up, it means the effect has gotten to your registry and other parts of your PC.

You need to perform a deep malware scan to remove even the most adware file. Thus, you may need to clear the risks with antivirus third-party software that can detect new emerging threats and malware.

Simply remove driver update pop-ups by running a comprehensive system scan and diagnosing it. In this way, you can terminate any phishing or malware issues on your PC.

➡️ Get TotalAV

3. Remove unwanted tasks in Task Scheduler

  1. Press the Windows key, type task, and select Task Scheduler.
    task scheduler
  2. Select Task Scheduler Library in the left pane.
    library driver update keeps popping up
  3. Now, select any rare tasks in the middle and click the Actions tab.
  4. Check the Details in the section below.
    details
  5. If you find any https://site.address redirect next to your browser name, right-click the task and select Delete.

If the Driver Update request keeps showing up when you restart your PC, it might be because there is a task scheduled for it in the Task Scheduler.

You need to delete the task and restart your PC to fix this.

4. Remove the Driver Update redirect

  1. Right-click the browser shortcut you are getting the update message from and select Properties.
    properties
  2. Click the Shortcut tab at the top.
  3. Now, remove any https://site.address at the end of the browser path in the Target field.
  4. Finally, click the Apply button, followed by OK.
    shortcut driver update keeps popping up

If the Driver Update prompt keeps popping up when you launch your browser or visit a website, it is likely that the website causing the annoyance has a redirect in your browser shortcut.

You need to remove this redirect to restore normalcy on your browser.

5. Reset your browser

  1. Launch your browser and click the Menu button.
  2. Select the Settings option.
    menu settings
  3. Now, click the Reset settings option in the left pane.
  4. Select Reset settings to their original defaults.
    reset settings
  5. Finally, click the Reset settings button.
    reset button driver update keeps popping up

If removing the redirect from your browser shortcut does not stop the Driver Update prompt from popping up, you need to reset your browser.

This will help you remove all the settings, shortcuts, and temporary site data.

If the solutions above fail to stop the Driver Update pop-up, you need to perform a clean install of your OS.

This is because the adware might have made too many changes to your PC, making it difficult to remove it.

We have reached the end of this detailed guide. You should now be able to stop the Driver Update message to keep popping up on your PC, provided you follow the instructions above.

Similarly, if you actually need to update your drivers, check our list of dedicated driver updaters for the best software to use.

Were you able to get rid of this issue? Let us know the solution that helped you in the comments below.

How to Easily Manage Bookmarks on Opera Browser

If you want your bookmarks to be all organized and lined up in the browser, be sure you can fully personalize and manage bookmarks on Opera without any effort.

Bookmarks help you save your favorite web pages and quickly access them whenever you want. There are numerous ways to organize your bookmarks in Opera. You can bookmark a web page, create folders, give your bookmark a new name, and organize them so you can view them later without being a lost wanderer.

Opera focuses on browser customization, UX elements, and AI features. The browser lets you manage the bookmarks easily from the settings.

You can save your bookmarks and access them from other browsers or devices, when you’re commuting, for example. There are bookmark exporting features to keep your favorites in one place.

Opera One

Opera One

Take control of the digital bookmarks and organize them seamlessly with this revamped browser.

Can you make bookmark folders in Opera?

It is certainly possible. You can simply make bookmark folders in Opera by pressing the folder icon in the bookmarks settings. Once you created the folder, it will show up inside the Bookmarks Manager panel.

So, next time you want to bookmark any web page, you just have to press the heart icon provided in the URL section.

To create a bookmark folder. Press the heart icon in the URL of that webpage and Bookmark Manager will open up. While you’re still inside the Bookmark Bar, click on the Folder menu beside the Bookmark bar option to create a folder. Give your folder a name so that you could easily find it the next time you’re bookmarking a page.

How do I organize bookmarks in the Opera browser?

In the next part, we’re going to show some ways using which you can manage bookmarks in the Opera browser and organize your favorite web pages for quick access. Let’s get to it!

1. Access your bookmarks on Opera

1.1 From the browser sidebar

  1. Open a new tab in the browser.
  2. Now, hover the mouse cursor on the left side to see the sidebar.
    open Opera bookmarks
  3. Go to the heart icon and click on it.
  4. In the manager panel, click on the Bookmarks bar to expand all of them.
    sidebar bookmarks Opera

2.2 From the navigation bar

  1. Click on the heart icon next to the URL bar.
    bookmark heart Opera
  2. After you bookmarked the website, the dialog box will appear.
    dialog box opera
  3. Select the View in Bookmarks button to open the tab.
  4. In this tab, select the Bookmarks option and to all your saved webpages
    bookmarks manager panel
  5. See the Speed Dial bookmarks or Other bookmarks folder below.

2. Rename bookmarks in Opera

  1. Access the bookmarks from the sidebar panel.
  2. Go to the bookmarked website you want to rename and click the three dots.
    rename bookmarks
  3. Now, select the full text and rename it according to your needs.
    renamed bookmark
  4. Click wherever on the screen to save the changes.

3. Import or export bookmarks

  1. Open the full bookmarks view from the sidebar option.
    Open the full bookmarks view
  2. In the full view, click on the Import/Export button below.
    Import Export button
  3. Choose Import or Export to start the process in the settings.
  4. Tick the boxes for bookmarks and press the Import button.
    import bookmark option
  5. Wait until all the information is transferred from another browser.
  6. Repeat the steps for the other process.

4. Show and hide bookmarks in Opera

  1. Click on the equalizer button to open Easy Setup.
  2. Scroll down to find the Layout section and Show bookmark bar option.
  3. Toggle on/off depending on what you need to do.
  4. The bookmark bar will show on the top bar with all your websites.
    Show bookmark bar
  5. You can hide it by right-clicking on the top bar and Hide bookmarks bar.
    Hide bookmarks

Now you know that the Opera browser gives you plenty of methods to easily organize and streamline your bookmarks. Not only that, it now offers some AI functionalities like AI prompts using which you can transform your search queries for better results.

In case you have problems with bookmarks, we also have a guide on what to do if Opera GX bookmarks aren’t showing, so don’t miss it.

Also, don’t miss our guide on Opera favorites if you want to know how to feature works.

In the end, we wish that our guide proved helpful for your browsing needs on Opera and now you can bookmark and save your sites effortlessly. For other curiosities, you can always reach us in the comments section.

Microsoft HoloLens 3 might finally be released in 2026

The HoloLens devices are some of Microsoft’s most underestimate products. The VR/AR headset runs on Windows 10 and Windows 11, and it’s very much of use to many professionals, including medical professionals.

Recently, Microsoft announced that HoloLens 2 will support Windows 11, and the update also brought a lot of new features to the device. The update to Windows 11 sparked a conversation around HoloLens 3, the next VR/AR headset that the Redmond-based tech giant should put out in the market.

However, there was a time when HoloLens 3 was officially out of business, and Microsoft announced that it will be shutting down the team behind the product. But, of course, some things have changed meanwhile, and the Redmond-based tech giant is supposedly working on a new patent for HoloLens 3.

Wipo’s Patentscope department has recently released a patent that seems very close to the HoloLens’ design. The patent, which is available online, has been ordered by Microsoft, and a team of specialists worked on it. Although it does not have a specific name, its codename is WO2023075953 – Modular Head Mounted Device. Could this be HoloLens 3?

Will Microsoft release HoloLens 3?

The patent envisioned a VR/AR headset that includes a standard interface from where you can connect it to different other devices.microsoft hololens 3

The modular sensor and display module may include a standard interface for attachment to various fit systems, including, for example, headband, VR headset, glasses temples, helmet, and the like

If the patent is indeed intended for HoloLens 3, then it seems the device is far more user-friendly than HoloLens, or HoloLens 2. Plus, it is also patented to connect it and use it together with other system configurations.

According to the patent, you’ll be able to use it with your smartphones, smart watches, tablet computing devices, special-purpose hardware devices, network appliances, and so on.

Microsoft might release a more user-friendly HoloLens in light of Apple’s new Vision Pro VR/AR headset. If you don’t know, Apple will release its Vision Pro device next year, and it promises to revolutionize VR/AR headsets. However, some agree that they’re far too expensive for what they’re actually offering.

But the device did reignite the flame and the excitement around such devices, and if this patent offers any clue, then Microsoft will step into the game with a new improved HoloLens.

Considering the Redmond-based tech giant’s involvement and investments in AI research, the new Microsoft HoloLens 3 will most surely benefit from an enhanced Copilot or a similar AI tool.

Should we be excited about Microsoft HoloLens 3? Well, we should be, and rightfully so.

But what do you think about it? Let us know in the comments section below.

What Happens If You Don’t Activate Windws: Disatvantages and Restrictions

If you don’t activate your Windows copy, expect restrictions. Your OS will still work, but without an activation key you’ll have fewer customization options, limited updates, inability to upgrade for free, and a few other hiccups.

Below we’ll discuss all the disadvantages of not activating your Windows license, how long Windows will work without activation, and more info you need to know about this topic.

Disantvantages of not activating Windows

1. Limited personalization options

personalize windows license not activated

One of the biggest things you lose when your Windows license is not activated is the ability to customize your PC. There is no way to add that unique touch to your PC to make it truly feel like yours.

Below are some of the personalization features that will be unavailable to you:

  • Changing desktop wallpaper – If you have changed your desktop during the trial period, it will automatically change to the default one. You will not be able to change it again till you activate your PC.
  • Using Dark Mode – If you have not activated your OS, you cannot use Windows Dark Mode. You will only have access to the default light mode.
  • Changing themes – While you can download a series of themes from the Microsoft Store and other official sources, you won’t be able to apply them.
  • Taskbar Customization – Another personalization feature you lose is the ability to customize your Taskbar. This means you can’t hide it and change the icon sizes, among other features.
  • Lock screen customization – Many users like to change their lock screen background to something personal. This is absent on unactivated Windows versions.

Here’s our guide on how many times you can use a Windows 11 key if you need more information about that.

2. Limited updates

update

While you will keep getting regular updates even when your Windows license is not activated, they will be limited. Sometimes, you might miss out on some important security updates.

Also, you might be late to get the latest patches for bug fixes. You might also not get updates with new features early enough or at all.

This can be problematic, especially if you encounter issues with some Microsoft apps.

3. The annoying Activate Windows watermark

watermark

After the trial period to activate your Windows license, you will automatically have a fixed Activate Windows prompt in the bottom right corner of your screen.

This will always be present on your screen, irrespective of the app or page you open. This is to always serve as a reminder that you need to activate your OS.

However, this can be frustrating, especially if you take screenshots or do other activities that require you to use the full screen.

4. Frequent activation reminder

When you are nearing your trial period, you start getting your Windows license will expire soon prompts. After this, you start getting notifications in the Settings app about the need to activate your Windows license.

You can also get this notification while using other apps, which can cause distractions.

5. Inability to upgrade to another Windows version for free

Usually, you can upgrade from one version of Windows to another once it is available for free. An example is upgrading from Windows 10 to 11, provided you meet Windows 11 requirements and specifications.

However, this is only available for users that have activated their Windows license. Users with unactivated copies of the OS will need to perform a full restore even if they meet the requirements.

Let’s get right to it.

What does Windows Activation do?

Windows Activation basically confirms that your Windows copy is genuine. Also, it ensures that you are not using a single Windows copy on more than the permitted number of devices by Microsoft Software License Terms.

Aside from this, it gives you unrestricted access to everything the OS has to offer, from customization to regular updates. Finally, in most cases, if you activate your Windows license on a version of Windows, your will be able to use it on later upgrades.

Is it okay to use Windows without activation?

It is legally permitted to use Windows without activating the license. Microsoft stopped the experiment of rendering Windows useless after the trial period with Windows XP and Vista.

This is because users were constantly cracking the OS and creating pirated copies, leading to a loss of revenue for the company. Ever since users can use Windows without activation after the trial period ends, but with limitations.

How long will Windows work without activation?

You can use Windows for as long as you like without activating the license after the trial period. You will still have access to most of the features.

Also, you will be able to use your device for the most important functions. However, this will remain so provided that you never try to activate Windows with a cracked or pirated key.

These are some of the major disadvantages of not activating your Windows license. While it might be tempting to keep using the unactivated copy, it is undoubtedly better to purchase the one-time license to have access to the unlimited features the OS offers.

If you have activated Windows, but it keeps asking for activation, you can restore the key by following the solutions in our guide.

Also, if Windows keeps asking for activation after a hardware change, check our comprehensive guide to restore activation. Do you have any other activation-related issues? Feel free to let us know in the comments below.

Windows 11 Freezes When Alt-Tabing? 5 Ways to Fix It

If your Windows 11 PC freezes when you press Alt + Tab while playing a game, or working on multiple apps, this guide can help! We will explore expert-recommended methods to fix the problem right after discussing the causes.

What causes the Alt Tab freezing on Windows 11?

There could be various reasons for the computer freezing while playing issue; some of the common ones are mentioned here:

  • Corrupted system files – If the system files on your PC are damaged or affected by viruses, it could cause all kinds of issues. Try running the SFC & DISM scans to restore the files.
  • Incompatible software – The outdated software on your computer could cause the freezing issue. To avoid that, uninstall the incompatible ones.
  • New Alt-Tab system – The new Alt-Tab system was introduced with Windows 11 and could be buggy. To fix it, you can use Registry Editor to revert to the old one.
  • GPU feature – Sometimes, GPU features like Hardware Accelerated GPU Scheduling can cause the issue. Try turning off the feature to get rid of the problem.
  • Virus infection – If your computer is infected with malware, it may interfere with the normal functioning of your device. Try running a deep scan using a reliable antivirus tool.

Now that you know the causes of the issue, let us check out the methods to resolve the problem.

How do I fix the Alt-Tab freezing in Windows 11?

Before engaging in advanced troubleshooting steps, you should consider performing the following checks:

  • Restart your computer.
  • Ensure you have no pending Windows updates.
  • Run a malware scan to remove the viruses.
  • Quit Discord or other game streaming services.
  • Ensure you have a stable internet connection.
  • Check if you are logged in with a user with admin rights.

Once you have done these, move to the detailed steps mentioned below.

1. Disable the Hardware Accelerated GPU Scheduling feature

  1. Press Windows + I to open the Settings app.
  2. Go to System, and click Display.System, then click Display windows 11 freeze when alt tab
  3. Scroll down to Related settings and click Graphics.Graphics - related settings
  4. Under Default settings, click the Change default graphics settings link.Change default graphics settings
  5. Next, toggle the switch to turn off Hardware Accelerated GPU Scheduling.hardware-accelerated-GPU-scheduling-off
  6. Restart your computer to let the changes take effect.

2. Run SFC & DISM scans

  1. Press the Windows key, type cmd, and select Run as administrator to open Command Prompt with admin privileges.CMD elevated
  2. Click Yes on the UAC prompt.
  3. Type the following command to scan & replace the corrupted system files and hit Enter: sfc/scannowSFCSCANNOW CMD
  4. Copy & paste the following commands one by one to restore Windows OS image files and press Enter after every command:
    • Dism /Online /Cleanup-Image /CheckHealth
      Dism /Online /Cleanup-Image /ScanHealth
      Dism /Online /Cleanup-Image /RestoreHealth
      DISM windows 11 freeze when alt tab
  5. Reboot your PC to save the changes.

As a more effective alternative, you can try an automatic repair tool to scan your PC for corrupt or missing files and replace them with fully functional elements.

3. Revert to the old Alt-Tab system

  1. Press Windows + R to open the Run dialog box.Regedit windows 11 freeze when alt tab
  2. Type regedit and click OK to open Registry Editor.
  3. Navigate to this path: Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer
  4. Right-click Explorer, select New, then DWORD (32-bit) Value.New DWORD
  5. Once created, name it AltTabSettings.
  6. To modify the Value data, double-click AltTabSettings, locate the Value data, and change the value from 0 to 1.regedit_Alttab windows 11 freeze when alt tab
  7. Click OK and restart your computer.
  8. Once the computer is back online, launch the game and check if the issue persists.

4. Uninstall the recent Windows update

  1. Press Windows + I to open the Settings app.
  2. Go to Windows Update, then click Update history.Windows Update 2
  3. Under Related settings, click Uninstall updates.Windows Update - Update history windows 11 freeze when alt tab
  4. Locate the recent update installed, and click Uninstall.Uninstall update
  5. Follow the onscreen instructions to complete the process.

5. Perform a repair install

Note icon NOTE
Before moving to the steps, ensure you have backed up all your essential files.

5.1 Download the ISO file

  1. Go to Windows 11 website, locate Windows 11 Disk Image (ISO), select the edition from the drop-down menu, and click Download Now.chrome_Download ISO windows 11 freeze when alt tab
  2. Next, choose the language and click Confirm.chrome_Confirm
  3. Click Download again to initiate the process.

5.2 Install the repair upgrade

  1. Press Windows + E to open the Windows File Explorer.
  2. Locate the downloaded file and click Mount. You will see a Virtual DVD drive as soon as it is complete.Mount drive and double-click the file
  3. Go to the DVD drive, double-click the file to start the process.
  4. If you see a security warning, click Open.
  5. On the following prompt, click Yes.
  6. You will get a series of instructions on the Windows 11 Setup window; follow all of them until you reach the Ready to Install page.
  7. Once there, click Install.

Now Windows will copy the files and reboot your computer, and once it is up, the repair upgrade will start. The process may take around half an hour, and your computer may restart multiple times, so please be patient. Once done, you will get the sign-in screen, log in and use your computer as you like.

So, these are the methods to fix the Windows 11 freeze when you press Alt–Tab and resume playing your favorite games.

If you are facing a similar issue, like Windows 11 freezing randomly, we recommend you check out this guide to find quick solutions.

Please feel free to give us any information, tips, and your experience with the subject in the comments section below.

What is PaceKeyChain File & Why is it in the User Folder?

Multiple users have found the PaceKeyChain file inside their User folder and are confused about what this file means and what should be done with this file.

In this guide, we will explain to you what the PaceKeyChain file is and whether you can remove it from your computer or not. Let us dive into it.

What is the PaceKeyChain file?

We did a lot of research and found out that the PaceKeyChain is a type of encrypted file created by a software called iLok.

iLok is a software that helps you manage authorizations. You can use this license manager which will help you activate/deactivate your licenses to manage your workflow. All iLok-enabled licenses can be easily activated using iLok USB Smart Key

Why is the PaceKeyChain file inside the User folder?

There is no exact reason why the PaceKeyChain file is inside the User folder. Chances are that someone else was using your computer and the user forgot about this software.

Also, chances are that malware has infected your computer and causing such issues on your computer. If you have recently installed new software on your PC, then you can also try to uninstall that program which will help you find out if this file was created because of a software conflict or not.

How can I remove the PaceKeyChain file from my PC?

1. Perform a virus scan

  1. To open the Start menu press the Win key.
  2. Type Windows Security and open the appropriate result.
  3. Select Virus & threat protection.
  4. Click on Quick Scan.
  5. Let the process complete and apply the fixes.
  6. You can also choose Scan options and choose Full scan for in-depth scanning, and after that, restart your PC.

You should scan your PC frequently to ensure that it isn’t affected by any virus or malware. Because malware or virus can corrupt or delete important files and also introduce unwanted files on your computer.

Do note that the Windows Security tool isn’t that effective in tackling viruses or malware, especially modern ones.

To fix this, we would suggest you check out the TotalAV tool because it offers one of the highest detection rates and comprehensive protection and prevention.

⇒ Get TotalAV

2. Uninstall the software

  1. Press the Win key to open the Start menu.
  2. Launch Control Panel.Control Panel start menu quickfontcache.dll
  3. Select Programs and Features.
  4. Select iLok and hit the Uninstall button at the top.uninstall program roblox configuring stuck
  5. Follow the on-screen steps to remove the program from your PC.
  6. Restart your computer and check if the PaceKeyChain file is still there in the User folder or not.

You can also try removing the iLok program from your computer as this is the culprit for the PaceKeyChain file in your computer. Simply remove the program and check if this fixes the issue or not.

However, if someone else is using your computer and installed this tool, you will need a master password to uninstall it.

We also have a guide that lists down some of the best uninstaller programs that you can opt for on your computer.

3. Perform a system restore

  1. Open the Start menu by pressing the Win key.
  2. Type Create a restore point and open the appropriate result.
  3. Click on the drive where you have installed the OS and choose System Restore.system restore
  4. Select the restore point and select Next.restore to fix websites opening automatically in Chrome
  5. Click Finish to begin the restore process.

Well, you can also use the system restore process to take back your system to a time when the iLok program wasn’t installed on your computer.

Do note that the process will work only if you have a system restore point already created on your PC. To learn that, you can read the guide on how to create a system restore point.

If nothing works, then you would need to reinstall Windows OS on your computer. For your convenience, we have a guide that explains how you can reinstall Windows 11 in 2 easy steps.

That is it from us in this guide. We would like you to check out our detailed guide on what is view.exe file and whether or not it should be removed from your computer.

Let us know in the comments below, which one of the above solutions resolved your issue of the PaceKeyChain file.

Why is Toshiba External Hard Drive not Showing up? [Solved]

Toshiba produces some of the best external hard drives available today. However, like most drives, it is prone to inaccessibility and operational problems. One such problem is the drive not showing up in File Explorer, preventing users from using the storage device.

If your Toshiba external drive is not showing, this article will briefly overview some of the common causes of the issue and provide steps to help you resolve it.

What causes Toshiba’s external hard drive not to show up?

Some of the significant causes preventing the drive from showing up are:

  • USB port malfunction or improper connection – USB ports can get faulty due to age, dust, or hardware failure; if this happens, devices connected to those ports will not show up on your PC.
  • Unsupported drivers – If the drive drivers running on your PC are not supported by the OS, it can prevent connected devices from functioning correctly.
  • Outdated system drivers – USB ports work in sync with drivers to identify the type of the external device connected; if the drivers are outdated, the connected drive might not appear.
  • Corrupt external drive – If your Toshiba external drive is corrupt or faulty, it’ll likely not appear on your PC when connected.
  • Absence of drive letter – External drives are assigned to be recognized in File Explorer; if the drive letter is missing or incorrect, it can prevent Windows 11 from recognizing the drive.

Having identified the causes, let’s explore the solutions below.

How do I backup/recover data from a Toshiba external hard drive?

Before you can troubleshoot your external drives, you should focus on backing up the existing data on the drive. This is because once you start troubleshooting the external drive, it becomes vulnerable to disk failure, leading to complete data loss.

Therefore, before you attempt to fix the Toshiba external drive not showing up issue, you must back up the files on the drive. Our guide on how to use the backup settings in Windows 11 will help you through the process.

So, you can use any of our recommended third-party recovery software tools here to recover data from your hard drive.

How do I fix Toshiba external hard drive not showing up?

Before we proceed with more advanced solutions, here are a couple of quick fixes you can attempt:

  • Reconnect the Toshiba drive USB cable to other ports.
  • If you’re using a USB hub, try connecting the Toshiba drive directly to one of the USB ports of your PC.
  • Connect the Toshiba drive to a different PC using the original cable to see if the problem originates from the drive or the machine.

If the error persists after applying the above fixes, try the following tweaks.

1. Reassign the letter for the Toshiba drive

  1. Right-click on the Start menu and click on Disk Management.
  2. Right-click the partition on your Toshiba external drive in the next window and click Change Drive Letter and Paths.
  3. Select the existing drive letter and click Change. If there is no drive letter, click on Add.
  4. Select a new drive letter and click OK.
  5. Click OK to confirm your changes and restart your PC to see if the Toshiba external drive will appear.

If your Toshiba external drive appears in Disk Management but not File Explorer, reassigning the drive letter can help fix the bad sector issue.

Changing the drive letter allows Windows to re-read the unallocated space. You can also check out our guide on how to fix Disk management not loading.

2. Update your PC drivers & OS

  1. Press the Windows key, type in Device Manager in the search box, and hit Enter.
  2. Locate Disk drives, right-click on the drivers, and select Update driver.
  3. Click Search automatically for updated driver software, and follow the prompts to complete the update.
  4. Close the device manager, and press the Windows key + I to open the Settings app.
  5. Then, click Windows Update and select Check for Updates. (If there are, Windows will install them automatically)
  6. Close the Settings app, and restart your PC to see if the error is fixed.

If your portable drive is not recognized by Windows, you’re running outdated drivers. Running a Windows and driver update can help you fix the Toshiba external drive not showing.

You can also choose a good driver updater tool, for example, Outbyte Driver updater, to update your drivers automatically with the latest versions.

3. Initialize the Toshiba hard drive manually

  1. Right-click on Start, and click on Disk Management.
  2. Right-click on the Toshiba external drive in the next window and click Initialize Disk.
  3. Select a partition style and click OK.
  4. Close the Disk management app and restart your PC to see if the issue is resolved.

Toshiba hard drives that have not been initialized won’t appear in File Explorer; initializing the disk can help you fix the problem. However, initializing a disk can format the drive; ensure you back up your drive before attempting this step.

4. Format the Toshiba external hard drive

  1. Right-click on Start and click on Disk Management.
  2. Select the volume of your Toshiba external drive and click Format.
  3. Check the Perform a quick format option and click OK.
  4. Click OK again to confirm your actions and wait for the drive to be formatted.

If the Toshiba external drive wasn’t appropriately formatted before being inserted into your PC, it could prevent it from showing up.

In this case, you’ll need to format the drive to make it functional with your PC. Check out what to do if you get an HDD format error.

5. Turn on the USB hub & show all hidden devices

  1. Press the Windows key, type Power Plan in the search bar, and hit Enter.
  2. Select the Choose the Power Plan option, and click Change the Plan settings.
  3. Navigate to change the advanced power settings, click on USB settings and expand the USB suspend settings option.
  4. If the option is enabled, click on Disabled and Apply.
  5. Click OK to confirm your changes, and check if the Toshiba external drive is now showing.

In some cases, the external drive might display as a hidden device preventing it from showing up in File Explorer. You can fix this by turning on a USB hub displaying all hidden devices.

Working with external hard drives is very beneficial because their portability allows you to carry so much data in a tiny piece of hardware. However, external drives can become inaccessible due to several reasons. When that happens, ensure you follow the steps in this guide to help you fix the problem.

If you’ve got any questions about your Toshiba drive or suggestions on how to fix this issue, let us know your thoughts in the comments below.

How to Allow or Stop Eero From Blocking Websites

We’ve all been there. You’re trying to access a site but keep getting that dreaded message that the site can’t be reached. At first glance, it may look like a network connection issue, but after an in-depth examination, it seems Eero is blocking these sites.

If you have a large family, you know how convenient it is to use Eero instead of Wi-Fi extenders. However, blocking sites is an unwelcome side effect, but do not fret, as there is a workaround to stop it from blocking sites, as you shall see below.

Does Eero block websites?

Yes. But it’s not what you think. It’s not uncommon for your Wi-Fi to block sites, but you can easily unblock them.

The Eero network is designed to give you the best possible Wi-Fi experience. It expands your network capabilities, and you may find that some sites are blocked if suspected to be harmful.

Sites that contain malware or phishing can compromise your security and put your private information at risk. 

Eero will block them by default. This acts as an extra layer of protection because we all know how the Internet can be. Even more, enhancing your Eero router’s security can be further achieved by integrating a VPN. Learn more about the top VPNs for Eero routers and how to install them in our detailed article.

If you don’t have a good antivirus in place, you have Eero to thank for keeping its eye on you to protect your system.

Furthermore, if you have young children with devices connected to the internet, you can use this feature and enable it. This way, you can limit your children’s exposure to inappropriate content, such as pornography or violent images.

Still, you can disable this setting if you want to access a website known for its poor security practices, or Eero is just blocking even harmless sites.

How do I stop Eero from blocking websites?

  1. Launch the Eero app, preferably on your phone. The below images are from an iPhone, so on Android, the options may slightly differ.
  2. Navigate to the Discover tab.
  3. Tap on the Block and Allow sites option.
  4. Since it is blocked by default, this is the first option that you will come across. 
  5. Now, to allow a site, tap on Allowed and select Allow site.
  6. Here, you can proceed to enter the URL of the site you wish to unblock in the Domain entry.
  7. Toggle on the Network option under Allow for.
  8. Under Profiles, check the boxes of the users in your household you want to access the site, and the site will be unblocked.
  9. Also, ensure to select a reason for allowing the site so Eero can collect data and avoid such mistakes, especially if it is an inaccurate block.

Depending on factors such as the speed of your Internet connection, browser cache, and PC speed, these settings may vary in the time they take to apply.

To hasten the process, you can clear the cache and cookies on your browser or restart your PC. And that’s how to allow or stop Eero from blocking your websites. 

If you’d like to add another layer of protection, we recommend adding a VPN, and we have a list of the best VPNs for Eero routers.

We hope that Eero does not block any legitimate sites and that this guide has helped demystify the blocking issue.

Beyond managing blocked sites, enhancing your Eero router’s security can be crucial. Explore our guide and enhance Eero router security with these VPNs for advanced protection options.

Have you experienced this issue before? What steps did you take to bypass it? Let us know in the comment section below.

Output Device Does Not Support HDCP: How to Fix it

You have your snacks and cozy blanket ready to catch up on the latest trending movie, but there’s a problem. A message dubbed output device does not support HDCP appears on your screen instead of the movie.

What a bummer. Could it be an incorrect connection or a virus? And what does HDCP mean? We get to the bottom of all these questions and give you several ways to solve this error in this article.

What does it mean when my TV says it does not support HDCP?

HDCP stands for High-bandwidth Digital Content Protection. It’s a set of encryption rules that prevent digital video and audio from being copied and converted to other formats.

When you play protected content on your computer or TV, it checks if your monitor supports HDCP before allowing you to watch or listen to anything. If your monitor does not support HDCP, then the content will not play.

That’s when you’ll get a message such as Samsung tv saying this screen does not support HDCP or this display does not support HDCP.

HDCP rules can be a hassle for any device that connects to your TV via an HDMI cable, including gaming consoles and streaming devices. If your device doesn’t support HDCP, it might not work with your TV or cause screen flickering or other issues.

It’s no surprise that most streaming sites have enforced such rules because, let’s face it, it does cost money to produce these films. You have to meet halfway by covering the costs and the streaming service to bring the content to you.

Still, streaming on the wrong hardware is not the only cause of this output device does not support HDCP error. Others include:

  • Outdated firmware – Most people never really check for firmware updates on their TVs as long as they’re working. However, this can sometimes be detrimental when you’re trying to connect to regularly updated software.
  • Faulty HDMI cable – Sometimes, it’s not that serious. It may just be a bad HDMI cable that has been through wear and tear and needs a replacement.
  • Driver conflict – Your display drivers may be outdated, causing a conflict when you try connecting.
  • You are using an unsupported device – Your TV or PC may be connected to an HDMI port that does not support HDCP or needs to be upgraded to a higher version. This is common in most older TVs. 

How do I fix HDCP not supported?

Perform the following preliminary checks first before attempting the solutions below:

  • Check your devices for HDMI ports and ensure they’re HDCP-compliant. Most will be labeled behind the TV or on the manufacturer’s booklet. It should support HDCP 2.2 or higher if you’re using an older device.
  • Check whether there are issues with your HDMI ports.
  • Unplug all cables, then plug them back in one by one, ensuring they’re securely connected at both ends.
  • Try with another HDMI cable if available. 
  • Ensure your Windows is up-to-date if you’re using your PC.

1. Update your TV firmware

  1. For this solution, we shall be using the TCL model.
  2. On your TV, find your Settings.
  3. Go to System.
  4. Click on About then select Software update.
  5. Select Network update and click on System update.
  6. Now click on Check Update. Your system will scan for any available updates.
  7. You’ll either start downloading updates or get a message that your TV is already up to date.

2. Use a DisplayPort to HDMI adapter

If your device has an HDMI port, but it’s not HDCP compliant, you may get a this TV does not support HDCP via HDMI message. You’ll need a DisplayPort to HDMI adapter. So, if you’ve been asking yourself how to make your monitor or TV HDCP compliant, this is how.

This will allow you to connect your device directly to the TV without worrying about any issues with HDCP protection or when your monitor won’t detect your HDMI. To that effect, we have the best DisplayPort to HDMI adapters recommendations that are not only pocket-friendly but also reliable.

3. Update your display drivers 

  1. Hit the Windows key, type Device Manager in the search bar, and click Open.device manager w11
  2. Navigate to Display adapters to expand, right-click on your graphics card and select Update driver.Graphic Driver Update
  3. Select Search automatically for drivers.

This step is for those using PCs as monitors. For TVs, your display drivers are automatically updated when you update your firmware.

If the display drivers were the issue, it is better to use a third-party driver updater tool because you’re assured that you’ll get the right drivers for your PC.

We recommend the Outbyte Driver Updater for such updates because it is comprehensive. It will scan and detect incompatible, missing, outdated, or damaged drivers. Then, from its wide database, it shall match you with the right drivers.

That’s how to resolve the output device that does not support HDCP error on your TV and computer. Elsewhere, you may experience a related error where Netflix HDCP unauthorized content is disabled. No need to worry, as we have already covered ways to bypass this issue.

We’d love to hear from you for any additional thoughts or suggestions. Drop us a comment below.