Having knowledge of how to factory reset Windows 10 without settings can be more effective and comprehensive. Moreover, you can perform a factory reset on your Windows 10 to return your PC to its first state. So, it is essential to have a knowledge of how to factory reset Windows 10 before going into it.
Is factory resetting your PC a good idea?
The first question that should come to your mind is, should I factory reset my PC? Factory resetting your PC allows you to remove apps, settings, and drivers and install them cleanly without any problems.
It puts Windows to its original state, and the files pre-installed in your PC at the time of purchase would be intact even when reset.
However, some notable advantages come from factory resetting your Laptop. Likewise, there are some disadvantages that it poses to you as a user and also to your laptop.
What are the benefits of factory resetting?
Factory resetting your PC will help it fix issues deep-rooted in the system, causing it not to function as it should.
It deletes all corrupted system files on your computer. Also, it restores the system settings configured when you purchased the system.
Make sure you plug your PC into a stable power source.
Disconnect any remote connection on your PC.
Unplug USB devices and peripherals connected to your computer.
The above steps will help prepare your PC for the factory reset process and be sure it is successful. Then, you can proceed with the following steps to factory reset your Windows 10.
1. Factory reset via the Advanced Startup options
Click the Start button and click the Power option, press the Shift key and click Restart from Power options.
Select Troubleshoot from the options available on the new window.
Click on the Reset your PC option.
On the Reset page, choose either the Keep my files or Remove everything option to perform a complete reset.
Click the Reset button to proceed with the reset, then wait for the process to complete.
Resetting the PC using the advanced startup screen is the easiest method to reset only the C drive on Windows 11; read this guide to learn more solutions.
Likewise, it is common for users to complain about having issues while resetting Windows. So, check our guide on how to fix a factory reset stuck on both Windows 10 and 11.
Kindly leave your questions and suggestions in the comments section below.
Blue Screen of Death or BSoD errors are some of the most crucial errors you would come across on your Windows 11 PC. If you want to know more about BSoD, then you can check out our dedicated guide.
Many of our readers reported that Windows 11 throws a BSoD when Minecraft is launched. If you are also experiencing the same issue, then this guide is here to help you.
What can cause the BSoD error in Minecraft on Windows 11?
Here are a few common reasons because of why you could come across the Blue Screen of Death error when launching Minecraft on your PC.
You are using a different Minecraft launcher – Several user reports confirm that using a different launcher other than the original one causes this issue.
The Minecraft launcher isn’t up to date – You need to make sure that you are running the latest available version of the Minecraft launcher.
The correct Java file isn’t selected – You need to make sure that the correct version of the Java installed on your PC is selected in the Minecraft launcher.
Your antivirus is causing issues – Often antivirus software can cause issues running a program, as it may appear as a threat to the PC.
Problems with your BIOS – If you haven’t updated your BIOS then this could also result in BSoD errors.
Now that we know the reasons behind this BSoD, let’s start fixing it with our solutions below.
How can I fix the Minecraft BSoD error on Windows 11?
Before you attempt any advanced troubleshooting, here are a few things that you can try:
The error could be because of a temporary glitch which can be easily fixed by restarting your PC.
New updates can fix the bugs present because of the previous update. Check and install if a new Windows update is available.
Open the Start menu by pressing the Windows button.
Search for Minecraft launcher.
Right-click on it and select App Settings.
Click on Repair and Reset.
For several of our readers, simply repairing and resetting the Minecraft launcher solved the BSoD error with it. You can also try and check if this fixes the issue for you.
Click on the drop-down menu next to the Play button.
Choose Latest Release.
The update should start.
Usually, the Minecraft Launcher updates itself if a new update is available when you launch it. However, you can force the update to install by following the above method.
You need to keep the BIOS updated if you want to ensure your PC’s performance is optimal and you don’t run into multiple issues with it.
However, updating BIOS is a tricky task and should not be done, if you haven’t created a data backup. So, the first thing before you should do a BIOS update is to back up all of your data.
Now, you can follow our guide that helps you with all the necessary steps that you need to follow to update BIOS on your Windows 11 PC.
Well, the Windows 11 Minecraft BSoD error isn’t the only issue users have reported facing. You could also come across the Minecraft launcher not working in Windows 11 issue but this dedicated guide will help you fix it.
If Minecraft isn’t using GPU on your PC, then you can check out our guide that gives you 3 tips to fix the problem at hand.
That is it from us in this guide. Let us know in the comments below, which one of the solutions helped you resolve the Minecraft BSoD problem in Windows 11.
In this guide, we’ll dissect what this error is is and what you can do to fix it if you encounter it.
What does LUA Error stand for?
LUA error in WoW script appears if the code in the addon encounters issues. There are several causes for LUA errors, and with the following being the most common ones:
Bugs in the code – The most common cause for LUA errors is the addon code. Sometimes issues with the code can occur resulting in an error message.
Corrupted files – Corrupted files such as Config.wtf can cause errors with your add-ons.
Graphics settings – Certain graphics settings can sometimes cause problems with add-ons resulting in an error message.
How do I fix Lua error in WoW?
1. Adjust your graphics settings
Launch the game and open the game menu. Click on System.
Now set Graphics Quality to a different value. You might even put it on the lowest value.
Click on Apply and OK to save changes.
Resettings graphics settings to default can also help with this problem.
2. Delete the Config.wtf file
Go to WoW’s installation directory. By default, it should be: C:\World of Warcraft\
Next, navigate to WTF directory.
Locate the Config.wtf file, right-click it, and choose Delete.
Once you delete the file, start the game again.
This should help you fix LUA error function permanently on your PC.
If you’re running World of Warcraft, close it completely.
Uninstall any addon manager you may be running.
Navigate to the World of Warcraft folder on your computer.
Once you’re in the World of Warcraft folder, click on the game version of WoW that’s giving you Lua errors (_retail_, classic_era, or _classic_).
Rename the following folders:
Cache: Cache_Old
Interface: Interface_Old
WTF: WTF_Old
Launch WoW.
Once the game starts, reset all your settings to the default.
Lastly, in the console run the following command: /console cvar_default
By doing this, you can disable Lua errors WoW Shadowlands or WoW Classic.
With the simple solutions in this guide, you can understand, manage, troubleshoot, and fix WoW Lua errors. As for other errors, we also tackled Device Driver Is Not Compatible in WoW in a different article.
Did we miss anything? Which solution solved your issue? Don’t hesitate to let us know down in the comments section.
Windows 10 is a great operating system, bringing many new features and implementations. If you ever wondered how to record the screen with audio in Windows 10, in today’s article we’re going to show you how to do it.
In order to capture your screen in Windows 10, you must use software that Microsoft incorporated into the operating system.
This software will come in handy for all folks that would like to do it. We are talking about the Xbox One screen recorder also known as XboxOne DVR, which is part of the Xbox Game Bar.
Obviously, people need to record their screens for a variety of reasons, not only gaming, since it is great for presentations, online school, and work.
This tool allows you to record your screen on Windows 10 on any occasion (if your GPU meets the recommended requirements). And all within the system, without any 3rd-party software.
Does Windows 10 have video recording software?
Yes. Windows 10 has the Xbox Game Bar pre-installed on all devices that support it.
It was created specifically to record gaming sessions, but you can use it to record anything you do on your PC. It’s a good tool to make instructional videos or even presentations.
Does Windows 10 screen recorder record sound?
Yes. The built-in Windows Game Bar recording software lets you record audio as well. It offers users the possibility to record system audio as well as microphone audio.
Both can be recorded at the same time, for highly interactive videos, but you can also pick just one, or not record audio at all.
Tip
The Game Bar is great for quick captures, but if you want more advanced options such as custom dimensions, drawing tools, mouse emphasis, or closed captions, you’ll be better off with a third-party tool like Loom.
How can I easily record the screen with audio in Windows 10?
Record the screen in Windows 10 using Xbox Game Bar:
In order to capture your screen in Windows 10, you must use software that Microsoft incorporated into the operating system.
1. Press Windows Key + G at the same time.
2. Select Yes, this is a game.
3. In the Settings, you can set up recordingfeatures to your liking.
Backgroundrecording
Timer
Clip length
Customizable shortcuts
Audio, as desired
4. Click on the webcamicon to bring up the Capturemenu.
5. Once you’ve set up everything, just click on the circle and the recording should start.
6. To stop recording, just bring back command panel (Windows Key + G) and click the Stop button.
7. Alternatively, you can press the Windows Key + Alt + Rkeyboard shortcut to start/stop recording.
8. All of your recordingswill be stored in the following path: C:/Usersuser/name/Videos/Captures
This is how you can record your screen in Windows 10 with audio without having to install any third-party software.
It’s important to mention that you can use this tool to record your screen on laptops as well, as long as your laptop meets the hardware requirements.
Recommended system requirements
Note that you need to make sure you have the appropriate GPU. That’s the main reason why the below procedure is primarily intended for gamers.
These are the requirements you have to meet in order to record the game/screen footage:
The PC Video card must support the following encoders:
Intel Quick Sync H.264
NVidia NVENC
AMD VCE
AMD: AMD Radeon HD 7700 series, HD 7700M series, HD 8500 series, HD 8500M series, R9 series, and R7 series or later
NVIDIA: GeForce 600 series or later, GeForce 800M series or later, Quadro Kxxx series or later
Intel: Intel HD graphics 4200 or later, Intel Iris Graphics 5100 or later
If yours isn’t capable enough, perhaps it’s time to get a new one. Our list of best gaming laptops will provide the highest-performing products on the market at the moment.
NOTE
If your device does not support the Xbox Game Bar and you really need to show your screen to someone, you should know that most of the games have recording or screen-capturing features as well.
Screen recording affects performance
You’ve seen how simple it really is to record your gameplay on the screen, yet we have to mention that doing this will most likely affect your PC’s performance.
Depending on your computer’s capabilities and power, your in-game FPS will either slightly drop or drastically take a hit.
If your device can barely run a game with optimal FPS, trying to record gameplay on top of that will probably be too much to handle.
There are plenty of tools that can record your screen nowadays. Some are lightweight, some focus on performance, and some record higher resolutions, and 60 FPS.
To take screenshots, simply press the PrtSc key on your keyboard while you’re gaming, and the game will immediately create a screenshot into a designated directory.
Moreover, there are other ways to take screenshots on Windows 10. Here’s a list of different ways to take screenshots for you to check out.
If you’re not satisfied with the Xbox Game Bar or your hardware simply does not support it, you might want to try using specialized software.
Alright, since we talked about the methods of recording your screen, we have to tell you about the main differences between a video that has 30 FPS and one that has 60.
Firstly, we should briefly define what FPS is. The official term is Frames Per Second, and it’s pretty self-explanatory. It’s the number of frames registered in the course of an entire second.
Obviously, a higher number of frames will result in a more detailed movement. The image will flow better and smoother, more naturally.
Usually, a higher amount of FPS requires beefier specs, but it is entirely worth it. Clearly, a video that plays at 60 FPS will be more enjoyable to watch than one that only plays at 30.
However, when capturing your screen at 30 FPS, the video will occupy less space, so you basically trade image quality for more space.
Here is how you can record your screen at 30/60 FPS:
Press the Windows Key + S and type in Settings.
Select Gaming.
Then, click on Game DVR.
Scroll to Video Frame Rate and select either 30/60 FPS.
As you can see, recording in 60 FPS is quite easy. All you need to do is toggle the appropriate settings in the Windows settings. Additionally, you can change the quality of the video in the same place.
With this being said, make sure you follow our steps, and if you encounter any issues, feel free to tell us in the comments section below.
Whether you want to produce great tutorials for your readers or fans, record your gameplay to show them your skills, or just show someone a trick, you will need a good screen recorder.
Screen recorder software can be pretty difficult to use and sometimes you will get lost through their settings.
That’s why we’re going to show you an easy way of recording your desktop using a great tool called Aiseesoft Screen Recorder.
⏺️How can Aiseesoft Screen Recorder help you to record the screen?
The purpose of Aiseesoft Screen Recorder is pretty obvious from its name but it does a lot more than record your screen or desktop.
➡️ It captures any activity on your PC, including a video call, a webcam, and your gameplay and it does all that at the exceptional video quality.
For instance, it is very useful for recording a lecture or a presentation, taking snapshots, or even recording your voice.
➡️Moreover, you can highlight the cursor movement during the screen capturing so that viewers can see it a lot better.
➡️The tool comes with a dedicated game recorder that captures the sound from the game and your mic simultaneously.
➡️Plus, it supports GPU acceleration to record the game without lag and webcam overlay for adding great commentary during the most exciting scenes.
So, the possibilities are only limited by your creativity and, as you will see next, it’s also extremely easy to use.
How to use Aiseesoft Screen Recorder to record my screen with audio?
You will receive the installer file and after you run it, click on Install.
After a few seconds, you will be prompted that the installation was successful so click the Start Now button.
Now, you will be able to choose if you want to run the Free Trial version, to purchase or to register your product if you already bought the licence from the website.
Next, you even get to choose between two skin options. We chose Elegance, of course, then hit OK.
Now, from the main screen, select Video Recorder.
In the next window, from the first tile you can select the Full screen or a Custom selection and right below you have the option to set the resolution of the caption selection. There’s even an option to choose the screen if you’re working with multiple displays.
Next, you can turn on the webcam and change its settings, turn ON or OFF the system sound and set the volume level or turn on the microphone.
The only thing left to do is to press the big red Record button.
A countdown will indicate the recording start and when you click the Stop button, your recorded clip will show up on the built-in editor. If you buy the full version, you can also cut the desired selection and then hit the Save button.
Now type the name of the video, set the destination on your drive and click Next.
If you’re running the free version, you will be prompted with the message that you can only save 3-minute clips but if you have the full version, you won’t have that limitation. Click the Save anyway option.
After that, you will see a screen with a list with all your recordings and on the right, you will find 5 more tools that you can click on to download and use their free trial versions.
As you can see from one of our screenshots above, with the Free Trial version you will be limited to 3-minute intervals for saving after each recording.
Also, you won’t be able to edit your video and you will not benefit from the noise cancellation and microphone enhancement features.
However, you are free to make as many screens captures as you want without any watermark and the upgrades and technical support are free.
What are the other Aiseesoft Screen Recorder settings?
If you click the Settings button from the main screen, you will discover a comprehensive menu with a lot of options to play with.
Hit the cogwheel icon to access the Settings menu
By default, the first window will be the video recording Preferences. In the Recording panel above there are a lot of options like the ones to hide the interface when taking a screenshot, show the recording boundary, and more.
Below, you will be able to set up the Directory Settings, the location where you want to store all the files you’re saving.
The video recording preferences window in Aiseesoft Screen Recorder
It’s also important to go through the Output menu because there you will be able to change the file formats for all the photos, videos, and audio you record.
For the photos, you can choose between PNG, JPG, BMP, GIF, and TIFF, for videos you have MP4, WMV, MOV, F4V, TS, Avi, and GIF, and the sound can be recorded as MP3, WMA, M4A, and AAC.
Access the Output menu to set up the audio, video and photo file formats
So, this is how you can record your desktop and webcam quickly by using the free version of Aiseesoft Screen Recorder.
Aiseesoft Screen Recorder also has other important functions, such as Game Recorder, Phone Recorder, real-time editing feature (available in trial version), etc.
We hope we convinced you that it’s extremely easy to capture anything on your screen. At least that’s how we felt like using this app.
Did you get to use Aiseesoft Screen Recorder? Let us know all about your experience in the comments section below.
Was there a time when you were working or playing a video game on your new Windows 10 or Windows 11 operating system, and you got the Your device ran into a problem and needs to restart error message?
Sometimes, it goes even deeper, causing a restart boot loop, and some of our readers also reported the BSoD message, then faced a black screen.
Don’t be alarmed because! By the end of this article, you will have understood the reasons why Windows is acting like this and the steps you need to take in order to fix this issue.
What does it mean your PC ran into a problem and needs to restart?
This is usually caused by BSOD errors such as Internal Power Error, so the best course of action would be to wait it out.
If you notice a message saying Driver power state failure, be sure to check your drivers and update them to the latest version if necessary.
In some instances, you might even encounter a Critical process that died, and this indicates that specific software is causing the crash, so you’ll need to find it and remove it.
If you or a specific program deleted registry files from your System32 folder in the Windows partition, then you will most likely be notified that your device ran into a problem and needs to restart.
Furthermore, if RAM is running at a higher percentage than the operating system accepts, then you will also get this error message.
The high percentage of RAM usage can be caused by a specific application that you may have installed recently.
Also, you may run into this message associated with a lot of system errors like the BAD_SYSTEM_CONFIG_INFO or other BSoD.
How do I fix Windows ran into a problem and need to restart?
1. Select the Startup Repair option
This is a fix if you can’t boot into the Windows login screen or if the system goes into a frustrating boot loop.
Sometimes, you can get an OS incompatibility error when you’re trying to run Startup Repair. Don’t worry, we got you covered!
1. Insert your OS recovery disc, switch on the PC and then press any key to boot from the DVD or USB stick. If you don’t have media prepared, you can easily create a bootable Windows UEFI drive.
2. Press Next, then select the Repair your computer option.
3. Press the Troubleshoot button.
4. Now, click on Advanced options.
5. Select the Startup Repair option.
6. Next, select the target operating system to fix and Windows will initiate the repair, then restart.
2. Boot Into Safe Mode
Use the bootable media (just like in Solution 1) or restart the PC three times to activate Startup Repair.
You computer will reboot, then show the Advanced options screen, and select Troubleshoot.
Click on Advanced options.
Select Startup Settings.
Click on the Restart button.
Press the F4 key to get into Safe Mode.
Once you enter Safe Mode, check if the problem is still there. It’s possible that you might be able to fix the issue from Safe Mode, so be sure to try this method.
If you can access the system, you can also do that from the Settings menu. However, problems are likely to occur in the startup phase.
Click the Start button, type cmd, and select Run as administrator to run Command Prompt with full privileges.
When Command Prompt opens, type the following command and press Enter to run it: sfc /scannow
The scanning process will take about 15 minutes, so it will require your patience.
Once the scan is finished, check if the issue is still there. If the problem is still there, or if you couldn’t run an SFC scan, it’s advised that you perform a DISM scan instead.
3.2. Run a DISM scan
In the same Command Prompt window, type the following command and press Enter: DISM /Online /Cleanup-Image /RestoreHealth
Just like the System File Checker, the DISM scan will take a little bit of time, depending on the size of your disk and the PC capabilities so don’t interfere until it’s finished.
In some cases, file corruption can cause this and many other issues to occur, and in order to fix this problem, it’s advised that you perform both SFC and DISM scans.
Once the scan is finished, check if the problem is still there. If you weren’t able to run or complete the SFC scan, you might want to run it now.
Press the Windows Start button, type system restore, and select Create a restore point from the list of results.
System Properties window will now open. Click the System Restore button.
Click the Next button.
If it’s available, check Show more restore points option. Now you just need to choose the desired restore point and click Next.
Follow the steps to complete the restoration process.
If you’re not familiar, the System Restore tool allows you to restore your PC to an earlier state and fix various problems. Once you restore your system, check if the problem is still there.
We have a complete guide on how to create a System Restore point in Windows 10. Make sure you check it out to get all the information you might need in one go.
5. Update the drivers and Windows
Click on the Start button from Windows, type device manager, and select Device Manager from results.
Try to locate any devices marked with an exclamation symbol in the list, right-click on them, and select Update driver.
Next, select the first option, Search automatically for drivers.
The system will look for any updates and will install it. If it doesn’t, click on Search for updated drivers on Windows Update.
You will reach the Windows Update menu so click on the Check for updates button to see if there are new additions you should install.
If the system is up to date, hit View all optional updates.
Select the Driver updates section, check the boxes for any new drivers and click the Download and install button.
You should perform the first three steps for all the drivers, even if they don’t have the exclamation mark, just to be sure that all the drivers are up to date.
Modify the Memory Dump setting to fix Your device ran into a problem
The Your device ran into a problem and needs to restart BSOD error can be solved by changing the Memory Dump setting.
You need to configure your computer to perform an automatic restart and write a complete Memory Dump whenever it encounters system failure.
Press the Start button and type advanced system.
Select View advanced system settings from the list of results.
Click on the Advanced tab on the upper side of the Properties window, then select Settings from the Startup and recovery section.
Under the System failure section, uncheck the Automatically restart box.
Click the Write debugging information drop-down menu and select the Complete memory dump option.
Save changes.
Reboot your Windows device.
Check to see if you still have the error Your PC ran into a problem and needs to restart.
In some cases, Your device ran into a problem and needs to restart message can appear if your drivers are outdated.
This can be a problem, and in order to fix it, you need to find and update the problematic drivers. You can also visit the manufacturer’s website and download the latest drivers for your device.
How do you fix your device ran into a problem and needs to restart Windows 11?
If you’ve upgraded your system to Windows 11, you probably discovered that apart from the changed design and some new and interesting features, the new OS is not much different from Windows 10.
The majority of system apps and menus look the same or are at least in the same place you’re used to from the old OS.
In fact, all the solutions we presented above can be applied to Windows 11 without any problems, however, the Settings menu looks a bit different.
The Check for updates button is easily accessible in Windows 11
For instance, to view the optional updates, you will have to access the Advanced options from the Windows Update settings menu.
In case you still have this issue, and the machine is still in warranty, we would suggest you take the device to the store where you bought it because it is most likely a hardware malfunction.
Should the warranty period pass, you can either replace the faulty component yourself or ask for the help of a repair shop.
Now you have different ways to fix the Your device ran into a problem and needs to restart error in Windows 10 & 11.
If you have any other questions, don’t hesitate to leave them in the comments section below and we will get back to you as soon as possible.
Microsoft Publisher is an application used for desktop publishing and comes in handy to a lot of users. However, several of them reported that Publisher is not responding, which stalls their progress.
The problem is not uncommon, and you will find online forums filled with similar concerns and complaints. And there are several methods that seem to solve the problem in this case. So, let’s go through them all and fix things when Microsoft Publisher is not responding.
Why is my Publisher File not opening?
Here are some of the reasons the Publisher cannot open the file:
The file is too big – In some cases, users reported that the file is too big, and, as a result, they can’t open Publisher file. Here, you will need to reduce the size of the images added to the document.
Issues with the format – An issue with the format of items (usually images) added to the document can cause problems opening it and even lead to Publisher not responding.
Running an outdated version of Publisher – An outdated version is likely to throw errors more often than an updated version of Microsoft Office and even lead to file corruption.
How to fix Microsoft Publisher not responding?
Before we walk you through the slightly complex solutions, try the following quick tricks:
Restart the computer. In many cases, this did the trick, while in others, it provided temporary relief and allowed the task at hand to be completed.
If Publisher is not responding when printing, chances are that the issue lies with the driver. We recommend updating the printer driver or installing an older version of it.
In case none of the worked, head to the solutions listed next.
1. Disable Page Navigation
Launch Publisher, and open the document that’s throwing the error.
Now, navigate to the View menu, and uncheck the option for Page navigation.
This is one of the simplest workarounds, if not an actual fix, and should provide some relief. Even if Publisher is still not responding, it wouldn’t be as frequent, and the period it doesn’t respond would be considerably lower.
2. Use a third-party alternative to Microsoft Publisher
If you’re having issues with Publisher in Windows, then you might as well go for a software tool that can do the exact same thing, maybe even more and better.
For example, Adobe InDesign is just as good of a desktop publisher as Microsoft Publisher since it, too, can be used to create posters, flyers, brochures, magazines, newspapers, presentations, books, and ebooks.
However, the main advantage is that Adobe InDesign can also utilize its innate compatibility with other helpful Adobe titles, such as Photoshop or Illustrator, through which it can access a wide variety of resources.
The UI is easy to understand, and the template library for creating your products is much larger than Publisher.
That being said, if you still can’t get Microsoft Publisher to work even after following all of the steps mentioned in this article, then going for Adobe InDesign is the right choice.
Plus, using InDesign may be a better alternative due to its rich-feature functionality and layout designs that will surprise everyone.
Press Windows + R to open Run, typemspub /safe in the text field, and hit Enter.
Microsoft Publisher will now launch in Safe Mode.
Opening Microsoft Publisher in Safe Mode will allow you to identify if there are add-ins that may be causing issues and, as a result, Publisher is not responding. If that’s the case, disable them all and check if the problem is resolved.
Press Windows + R to open Run, type appwiz.cpl in the text field, and click OK.
Locate Microsoft Office, select it, and click on Change.
Click Yes in the UAC prompt.
Now, select Online Repair, and click on the Repair button.
Again, click on Repair to confirm the change.
Wait for the process to complete, and once done, check whether Publisher is still not working. In most cases, an Online Repair should fix things when Publisher is not responding.
5. Reinstall another version of Microsoft Office
If none of the previous methods worked, we have another method that might. Though it would take time, it’s one of the best bets, given the circumstances.
All you have to do is install a different version of Microsoft Office. For instance, if you are running a 32-bit version, switch to 64-bit and vice versa. Both would work if Publisher is not responding.
That’s it! The solutions here don’t just target the problem causing Publisher to stop responding but fix a range of other issues as well, including when a Publisher file won’t open.
Logitech G Hub is a free application that might assist you if you’re using Logitech gaming peripherals, such as a mouse, keyboard, and headset, and you want better control over the gears. Thus, this post will show you how to download Logitech G Hub on Windows 11.
For those of you who have been using Logitech devices for a long time, you may be familiar with their gaming software that assists customers in configuring the settings of their products.
But nonetheless, let’s see the Logitech G Hub’s functionality and proceed with the installation process. Follow along!
What does Logitech G Hub do?
With the G HUB, Logitech G introduces a new software platform that allows you to fine-tune control of your hardware while also customizing lighting, integrating your hardware with third-party apps, and more, all with an easy-to-use interface that is designed for future products.
It is a centralized location for optimizing and configuring all of your Logitech G gear, including mice, keyboards, headsets, speakers, and webcams. Also, it automatically detects and recognizes your gear, granting you access to all of its customization possibilities.
Color breaks and animations may be created, and macros and key bindings can be assigned, all through a straightforward and easy interface.
Furthermore, within your games, you can save numerous character profiles and switch between them on the fly. As a result, you will always have access to the abilities you require. Profiles from your fellow players, gaming professionals, and popular streams will be up for download.
You may also create your own macros to launch media and switch scenes by programming buttons with in-app actions or use your gaming equipment to command OBS Studio, resulting in a faster and more seamless broadcast.
With Logitech G LIGHTSYNC for keyboards, mice, headsets, and speakers, you can choose from a wide range of animation effects, download lighting profiles from the community, and even design your own complex effects from scratch. Sounds appealing, doesn’t it?
How can I download Logitech G Hub on Windows 11?
Use their official website
You can download the gaming gear from Logitech G Hub using the official website of the manufacturer. In the guide below, you’ll learn how to do it quickly.
2. Now, simply click on the Download for Windows 10 button. Yes, it will also work on Windows 11.
3. Once the file is downloaded, double-click on it to open it and then tap on the Install button as we have shown below. That’s it!
How does Logitech Flow work?
A new practical feature called Flow has been developed by Logitech Company, one of the industry’s leaders in computer peripherals, over the course of the last few years.
It is a feature built into their mice and keyboards that allow you to quickly move between multiple computers by moving your mouse cursor to the screen’s border.
To put it another way, it allows your mouse and keyboard to flow between your computers. You may even copy and paste your data between machines if this feature is enabled on them.
Flow allows you to operate many computers with a single mouse. A Logitech keyboard with flow functionality will allow your keyboard to move in sync with your mouse, giving you complete control over your computers.
It makes moving data across other platforms, such as text, photographs, or any other type of file, extremely simple and straightforward. You can easily copy information from one system and paste it into the other.
So, you may simply move your files without the need to rely on cloud-based storage services or send yourself emails with attachments while using Flow.
Another possibility is to use the feature to create a centralized workspace for several computers that can be located wherever you choose. Even the process of setting it up is really straightforward.
You can use the auto-discovery feature to locate and configure your computer in a matter of seconds after turning it on. After that, all the information is transported across a secure connection protected by SSL and AES-256-bit encryption.
Improper settings could also be at fault. In the following steps, we’ll show you a few different ways to address frame-per-rate issues in Dota 2.
First, try running the game in full screen mode and play it with the Vulkan API. Also, check your game latency to see if you have a speedy connection with the server.
How do I fix Dota 2 low FPS?
1. Close other apps
Press the Windows key + X and select Task Manager.
Right-click any app using too many resources or anyone you are not using and select End Task.
Finally, restart the game.
2. Verify game files
Launch Steam, click the Library tab at the top, and right-click Dota 2.
Choose the Properties… option.
Click Local files in the left pane and select Verify integrity of game files…
Now, wait for the process to complete and open the game.
Verifying the game files in Steam will replace any corrupt or missing files in your installation folder. This can effectively fix Dota 2 FPS drops as well as other errors such as Steam not recognizing installed games.
3. Check your drivers for updates
3.1. Update the driver manually
Right-click the Start button and select Device Manager from the list.
Right-click on the device from the list and select Update driver.
Select Search automatically for updated driver software.
If Windows doesn’t find the updates, you need to go to the manufacturer’s official site and download the new files.
3.2. Use a third party driver updater
An excellent solution for the Dota 2 FPS problem is a professional driver updating tool that can scan your PC for out-of-date drivers and provide you with a detailed report on every issue found.
4. Use the high-performance power plan
Press the Windows key, type power plan, and click Choose a power plan.
Click Create a power plan in the left pane.
Choose the High-performance option and click the Next button.
Finally, click the Create button.
The Dota 2 FPS drop might be because you are not using the correct power plan. While the High-performance plan will drain your battery quickly, it should provide enough power to run the rather demanding Dota 2 without a drop in quality.
Windows and driver updates are usually good, but can often mess things up, and users wonder how to roll back AMD drivers. We need to mention that if the Roll Back Driver option in the Device Manager is greyed out, that means the driver was not updated yet and there is no previous version to go back to.
How do I rollback AMD drivers on Windows?
1. Use the Roll Back Driver option
Type Device Manager in the Search bar, and click on the relevant search result.
Expand Display adapters, right-click on the AMD Radeon driver, then select Properties.
Navigate to the Driver tab, and then click on Roll Back Driver.
Now, choose a reason for rolling back and click Yes to start the process.
If you were wondering how to install older AMD drivers, this is the easiest option. To ensure that your system is running the latest chipset drivers before rolling back, you can visit this guide on checking your AMD chipset driver version.
2. Manually install the older version of the driver
Go to the AMD drivers & support page, find the last working version of the AMD driver, and download it.
Locate the driver you downloaded (.exe file), right-click on it, and select Run as administrator.
Click Yes in the UAC prompt.
Now, follow the on-screen instructions to complete the installation.
Once done, restart the computer for the changes to come into effect.
If you were wondering how to revert AMD drivers, there’s also the option to get them on the manufacturer’s website. The best part about this method is that you can get any version, including AMD’s previous drivers, for 5700 XT.
Open any web browser and go to your device manufacturer’s support website.
You can typically find previous driver versions listed under Other Versions or Previous Versions. Also, you could manually search for them.
You can review broader troubleshooting scenarios in this AMD Radeon graphics problem guide that helps diagnose deeper driver issues.
4. Use a reliable third-party uninstaller
If you were wondering how to roll back AMD Adrenalin or other drivers, several reliable and secure third-party uninstaller tools come to your aid. We also recommend CCleaner as afree tool that serves the purpose.
It will permanently remove software leftovers. Thus, you can reinstall the older driver without worrying about residual data and files. It will also remove any associated folders, icons, and registry files, unlike the Windows uninstaller that leaves traces.
As you can see, there are some easy options you can try to roll back your AMD drivers. Also, if the previous version doesn’t offer relief, you can constantly update your graphics driver to the latest version.
If you have additional questions, don’t hesitate to comment in the section below.
A clean and uncluttered desktop is usually the ideal way to go, but how would you react when the desktop icons look blurry even after putting in all effort?
This is a common problem faced by users on almost all iterations of the OS, but Windows 10 seems more likely to be affected. So, let’s find out how to fix blurry icons in Windows 10.
Why do my icons look blurry?
Here are some of the reasons the desktop icons look appear blurry:
Running an outdated graphics driver – If you run a corrupt or outdated driver, it will affect the display clarity.
Icon has a low resolution – Often, a few icons designed for older iterations of the OS have a low resolution and appear blurry in the ones released later.
A bug in the OS – In case you started encountering the problem after updating Windows, chances are that the issue lies with the installed version.
How do I fix blurry desktop icons?
Before we head to the slightly more complex solutions, let’s first try a few quick ones:
Restart the computer.
Check for Windows Update and install the latest available version.
If the problem is faced on an external monitor, reconnect it and check if it’s fixed.
If nothing worked, let’s head to the other solutions.
1. Change the View settings
Right-click on the desktop, hover the cursor over View, and select Small icons.
Now, check if the problem is fixed.
In many cases, it was a problem with the app icon’s resolution, which started to blur when it increased beyond a specific limit. So it would be best if you had them set to a Small icon for the best results.
2. Update the graphics driver
Press Windows + R to open the Run, type devmgmt.msc in the text field, and click OK.
Expand the Display adapters category, right-click on the graphics adapter, and select Update driver.
Now, select Search automatically for drivers.
Wait for Windows to install the best available driver automatically.
That’s it! The graphics driver should be updated now, and desktop icons shouldn’t be blurry in Windows 10.
In case Windows can’t find a newer version, navigate to the manufacturer’s official website and look it up:
If you don’t want to download the drivers manually, you can always download them automatically using a third-party tool.
The significant advantage of using such a tool is that it finds compatible versions and works on your system.
Thus, it keeps you away from damaging your PC by downloading and installing the wrong driver versions.
Outbyte Driver Updater is a simple tool that can automatically update all your drivers with just a single click, so if you don’t want to search and download the drivers manually, be sure to try this tool.
Its interface is straightforward to use, and once the scan is completed, the tool will compare your current drivers with the ones found in its built-in database.
Afterward, Outbyte Driver Updater will fix and update any missing or broken drivers.
Outbyte Driver Updater
A well-founded tool that can effortlessly help you find the correct driver versions for your device.
Press Windows + I to open Settings, and choose System.
In the Display tab, choose 100% from the Change the size of text, apps, and other items dropdown menu.
Scaling is probably the reason behind pixelated desktop icons if it wasn’t for the drivers. Some users reported that scaling was set to a higher level on their PC, resulting in blurry desktop icons, and putting it to 100% did the trick.
Type View advanced system settings in the Search bar and click on the relevant search result.
Click on the Settings button under Performance.
Select the Adjust for best appearance option, and click OK to save the changes.
This is another viable solution suggested by one of the users who had blurry text with high resolution in Windows 10.
You can optimize your PC to perform better without the UI visual effects. However, remember that this might affect your system performance, mainly if you use a low-spec PC.
5. Create a new user profile
Press Windows + R to open Run, type netplwiz, and hit Enter.
Click on Add.
Now, enter an email address associated with Microsoft (other than the one for your current account), and follow the on-screen instructions to complete the process.
Alternatively, you can create a local account by clicking on Sign in without a Microsoft account (not recommended).
Now, click on Local account.
Enter the details for the new account, and follow the on-screen instructions to complete the process.
If nothing else has worked, it’s likely a corrupt user profile to blame for blurry desktop icons. And the simplest solution, in this case, is to create a new one, either Microsoft Account or a Local Account.
Once done, use a reliable backup tool to transfer data between the two profiles.
By now, the blurry desktop icons would be visible, and the root cause of the problem would be eliminated. Also, the solutions listed here would work for blurry taskbar icons in Windows 10.
In Windows 11, the Watchdog_Violation error is a Black Screen of Death, the same as a blue screen issue often followed by a 0x00000133 stop code. That’s precisely what users claimed when encountering the DPC_Watchdog_Violation error on Windows 10.
This error occurs when the DPC (Deferred Procedure Call) runs longer than it should. Then the Watchdog bug checker has to wait too long for a DPC response, which triggers the above-mentioned BSoD error.
This issue often arises on PCs with SSD storage and it appears on Windows 10 and 11. It can also be related to corrupted system files, incompatible external hardware, and software conflicts. Another widely cited cause is an incompatible SATA AHCI driver file. For more details, check out what can cause a Blue Screen of Death.
How do I fix the DPC watchdog violation in Windows 11?
1. Unplug external hardware devices
First, try plugging any non-essential external hardware from your PC, such as printers, game controllers, and external USB storage devices. You can keep your mouse and keyboard plugged in, but unplug anything else.
Does the error continue to occur when you’ve disconnected external hardware? If not, one of the previously connected peripheral devices is probably incompatible with your PC.
Try re-connecting one device at a time to discover which one is incompatible. Updating an external device’s driver might fix its compatibility with the computer.
2. Run a System File Checker scan
Using a SFC scan will diagnose your operating system and detect corrupted files, thus removing them from your Windows 11 PC. This is how to perform this task
1. Bring up the Windows search box using the handy Windows key + S hotkey.
2. Type cmd in the search box to find and open Command Prompt.
3. Right-click the Command Prompt search result to select a Run as administrator context menu option.
4. Input the following command in the Prompt’s window and press Enter: DISM.exe /Online /Cleanup-image /Restorehealth
5. Now, scan the system files in your PC. To run a file scan, enter the folllowing command and press Return: sfc /scannow
6. Wait until the SFC scan has reached the 100 percent mark and displayed an outcome within the Prompt’s window.
3. Run a CHKDSK disk scan
Open the Command Prompt as outlined in the first three steps of the first resolution.
Type in this command and press Enter:chkdsk c: /f /r /x
Press Y and Enter to confirm.
Thereafter, select the Power and Restart options on Windows 11’s Start menu.
4. Replace the SATA AHCI device’s driver file
First, right-click the Start menu taskbar icon and select Device Manager’s shortcut.
Double-click IDE ATA/ATAPI controllers to extend that category.
Then double-click Standard SATA AHCI Controller, and click the window’s Driver tab.
Press the Driver Details button.
If the Driver File Details window shows the device has an iaStorA.sys file, you’ll need to change than to a Storahci.Sys one. Click OK to close the window.
Press the Update Driver button on the Driver tab.
Click the Browse my computer for drivers option.
Select the Let me pick from a list of available drivers option.
Then select the Standard SATA AHCI Controller within the selection box, and click the Next button.
Thereafter, restart your desktop or laptop.
5. Update the firmware for your PC’s SSD
If your PC has a solid-state drive, try updating its firmware. To do so, open the manufacturer’s website for your solid-state drive. Then download the latest firmware for your drive from the driver & firmware download section of that website.
To find model details for your SSD drive, simply open the Disk Drive category within Device Manager. Your PC’s SSD drive will be listed there with its full model number. Enter the model name for your SSD in the search box on its manufacturer’s website to find it there.
Alternatively, you can use third-party driver updater software like Fortect Driver Updater to update an SDD’s driver with the latest version from a huge database.
6. Choose an appropriate restore point
Right-click Start to select the Run accessory shortcut.
Type this text in Run’s Open box: rstrui
Click OK to bring up System Restore.
Select the Choose a different restore point option, and click Next to continue.
If there’s a Show more restore points checkbox available, select that option.
Choose a restore point that will restore Windows 11 to a date that predates the DPC_Watchdog_Violation error on your computer. Or simply select the oldest restore point date available.
Select Next and Finish to roll back Windows 11 to the chosen restoration point.
Rolling back Windows 11 will uninstall software installed after the chosen date. The software this system restoration removes might have been causing the DPC_Watchdog_Violation error.
You can check what software gets removed by clickingSystem Restore’s Scan for affected programs button. If you haven’t enabled System Restore, try manually uninstalling some recently installed software via Programs and Features.
7. Reset Windows 11
NOTE
Resetting Windows 11 will restore your PC to its default settings and remove all third-party software that didn’t come pre-installed with it. As you’ll need to reinstall software afterward, a system reset is recommended as a last-resort resolution.
First, click Start to open the menu.
Select the pinned Settings shortcut.
Click the Recovery navigation option.
Press the Reset PC button to open its utility.
Next, select the Keep my Files option (if you prefer to retain your user files).
Choose either the Cloud download or Local reinstall option.
Press the Next button, and click Reset to confirm.
How can I troubleshoot BSOD errors in Safe Mode?
If you can’t log in to Windows 11 because of the DPC_Watchdog_Violation error, try applying the above resolutions in Safe Mode. That’s a special Windows-troubleshooting mode for which only a minimal set of essential drivers and system services are enabled.
First, you’ll need to enter WindowsRE (recovery environment) by hard-booting your PC three consecutive times during the system startup.
Press and hold the Power button for five to 10 seconds at the Windows logo to hard reboot. Then you can activate Safe Mode in WindowsRE as follows:
First, select troubleshoot with your keyboard and press Enter.
Choose Advanced options to bring up that menu.
Then select Start-up Repair on the Advanced options menu.
Press the Reset button to reboot.
Select the Restart option.
Thereafter, press the F5 key to select Safe Mode with Networking.
The DPC_Watchdog_Violation error is one of the more commonly reported BSOD errors for Windows. However, many users have been able to fix that issue by applying the potential resolutions above.
Yet, we can’t promise those solutions will be enough to eliminate this error for all users. Those needing further resolutions can check out Microsoft’s blue screen troubleshooter. That troubleshooting webpage includes more potential fixes for the DPC_Watchdog_Violation error.
You can also discuss the DPC_Watchdog_Violation error in more detail within the comments section below. If you’ve discovered another way to solve the issue, which isn’t cited above, feel free to share your resolution below.
If your Lenovo touch screen is not working, you probably own a ThinkPad, or Yoga model ranging from 530 to 720. The problem is caused by driver issues, problems with peripherals, or hardware issues.
Before you start any of these fixes, ensure you disconnect any peripherals; they may trigger issues with the touch screen. Also, restart the device and ensure you have the latest Windows updates installed.
How do I fix my unresponsive touch screen on Lenovo?
1. Disable and re-enable HID-compliant touch screen
Right-click the Start button and select Device Manager.
Go to Human Interface Devices section and expand it.
Find the HID-compliant touch screen, right click on it and choose Disable.
Now, right click HID-compliant touch screen again and choose Enable.
This solution worked for many users and it’s pretty easy to perform it to get this out of the way.
2. Run an SFC scan
Go to Start, type command, right-click on Command Prompt, and select Run as administrator.
Type the script below and hit Enter. sfc /scannow
Wait for the scanning process to complete, and then restart your computer. On reboot, all corrupted files will be replaced.
A few users reported that Intel drivers caused this issue, and downloading the 3147_Chipset_Driver_MHWYW_WN32_604.10135.1001.55518_A00.EXE driver from Intel’s website fixed the problem.
If you are looking for an easier and faster solution, you can employ specialized driver updater software in these circumstances. Due to its complete error-freeness and user-friendliness, we suggest Fortect Driver Updateras an automated tool.
4. Modify the registry
Press the Windows key + R and enter regedit.
Once it opens, navigate to: HKEY_CURRENT_USER\Software\Microsoft\Wisp\Touch
In the right pane, double-click the TouchGate value.
If it’s not available, right-click the right pane, and choose New. Then select DWORD (32-bit) Value. Name it TouchGate and open it.
Set its Value data to 1 and save changes.
If the issue is still present, you may be having an issue with the touchscreen panel, so it might be best to contact Lenovo.
Taking the best out of the home network often requires WiFi access. Nonetheless, many users who turned to an external USB WiFi adapter have reported that it keeps disconnecting.
The problem is more tricky than it sounds. There are several temporary resolutions, but only a few work in the long run. And it’s the latter that we will walk you through today to fix the problem, once and for all.
Why does my USB WiFi adapter keep disconnecting?
Here are some of the reasons your WiFi dongle keeps disconnecting:
Hardware issues – In most cases, it was a hardware fault in the adapter itself that led to it persistently disconnecting.
Running outdated or incompatible drivers – Many users reported that outdated drivers caused the problem. Also, if you recently upgraded to a newer iteration, it might be that the installed drivers are incompatible.
Bug in the OS – Some reported that the USB WiFi adapter disconnects when downloading after installing an update. And it’s usually a bug in the latest version that led to this situation.
Misconfigured network properties – It’s a common reason, and simply reverting the changes recently made should fix things.
Also, some of the standard devices that usually cause the problem are:
Realtek WiFi adapter keeps disconnecting – External USB wireless adapters manufactured by Realtek have been found to exhibit the issue often.
TP-Link WiFi adapter keeps disconnecting – Many models of TP-Link adapters are known to disconnect and automatically reconnect.
Qualcomm WiFi adapter keeps disconnecting – Another adapter with which users faced the problem.
How can I fix my USB WiFi adapter?
Before we head to some slightly complex solutions, here are a few quick ones for you to try:
Restart the computer.
Connect the WiFi adapter to another port, and make sure other devices work fine when connected to the same port. Also, if you use a USB hub for the connection, directly plug in the WiFi adapter.
Connect the WiFi adapter to another PC to ascertain if the problem lies with it or the previous computer. If it’s the former, you will have to get it repaired or replaced, while in the latter, our solutions would get things up and running.
Check for overheating. When the WiFi adapter overheats, it automatically resets and disconnects from the network.
If none of these worked, try the following solutions:
1. Update drivers
Press Windows + R to open Run, type devmgmt.msc in the text field, and click OK.
Expand Network adapters, right-click on the problematic one, and select Update driver.
Now, select Search automatically for drivers and wait while Windows installs the best available version.
Alternatively, you could use third-party driver updater software. The benefit of using such tools is that they save you a lot of time and ensure an error-free experience.
We recommend you try Fortect Driver Updater, which is very easy to use and lightweight. Once you install it, you can set it up immediately and fix your drivers in just a few clicks.
Type Command Prompt in the Search bar, and click on Run as administrator.
Click Yes in the UAC prompt.
Now, paste the following commands individually and hit Enter each: ipconfig /releaseipconfig /flushdnsipconfig /renew
Once done, restart the computer, and the WiFi adapters should now work fine.
3. Check Power settings
Besides the standard fuss concerning drivers and network settings, another possible reason why the USB WiFi adapter keeps disconnecting is Power settings.
Various Power options are involved, some related to a USB hub and others in the advanced adapter settings.
Nonetheless, there are all unified in one system’s goal: to preserve power consumption by disabling certain features of the USB WiFi Adapter. So, to resolve this, you’ll need to ensure all related options are disabled.
Head to the manufacturer’s website and download the driver you find, regardless of if it’s for another iteration.
Now, right-click on the setup and select Properties.
Head to the Compatibility tab, tick the checkbox for Run this program in compatibility mode for, select an older iteration from the menu, and click on OK to save the changes.
Once done, run the setup and follow the on-screen instructions to install the driver.
In some cases, users couldn’t find a driver that worked on their iteration of the OS. Here, you can download it and install the driver in Compatibility Mode with the previous iteration.
5. Reinstall the OS
If nothing has worked, you are only left with the option to reinstall Windows. Here, the first step is to create a bootable USB drive and then use it to reinstall the OS.
While you could also factory reset Windows, that has often been found to be ineffective against several issues, and only a complete reinstall did the trick.
That’s it! By now, you would have the Internet working fine if the USB WiFi adapter keeps disconnecting.
Also, once you have managed to fix things, do not forget to find ways to increase Internet speed.
If you know of any other solutions, drop them in the comments below.
The UNEXPECTED_KERNEL_MODE_TRAP Blue Screen of Death can occur on any Windows iteration, but why does that happen in the first place?
A trap basically alters your OS mode by driving it to a kernel-based routine. Thus, instead of matching control with the executed process, the OS sets a higher priority on the execution of that process compared to user code.
What is Unexpected Kernel Mode Trap and what causes it?
As expected, bad drivers are the most common reason behind the UNEXPECTED_KERNEL_MODE_TRAP error, but there can be other factors that trigger the kernel’s failure such as:
Faulty RAM modules
Malware or virus infections
Malfunctioning peripherals or hardware incompatibility
Unsupported, outdated, or incompatible software plugins, or SSD firmware
Poorly coded programs
Corrupted system files or other data files that are damaged or broken
In other words, any files that fail the kernel’s integrity or compatibility checks can trigger the Unexpected Kernel Mode Trap on any iteration of Windows, including Windows 11.
In some cases, this error can be caused if your component connectors are covered in dust, so you’ll need to remove them and clean them properly before connecting them again.
How do you fix Unexpected Kernel Mode Trap error?
Before moving on to more complex solutions make sure to do the following:
Check your computer cables and RAM to make sure they are connected properly and not damaged.
1. Use a repair tool
When the UNEXPECTED_KERNEL_MODE_TRAP error occurs on devices, including Dell laptops, the best solution is to use a specialized repair tool. They are able to scan for and automatically download the exact file your system needs to be repaired.
2. Run the BSoD troubleshooter
Open the Settings app, and go to the Update & Security section.
Select Troubleshoot from the menu on the left followed by Additional troubleshooters on the right.
Select BSOD from the right pane, and click on Run the troubleshooter.
Follow the on-screen instructions to complete the troubleshooting steps.
Windows’s own troubleshooting tool can be used for dealing with various system problems, including BSOD issues. So, it might help with the Unexpected Kernel Mode Trap in Windows 10/11 issue, as well.
3. Remove the problematic driver
Go to the Start Menu, and click the Restart button while holding Shift on your keyboard.
In Advanced Startup select Troubleshoot.
Go to Advanced Options, and choose Startup Settings.
Click on the Restart button.
You should see an option to enter Safe Mode once the PC reboots. It is usually the F4 key.
When you enter Safe Mode, go to Device Manager.
Locate the problematic driver, right click and choose Uninstall.
This issue can be caused by all sorts of drivers, but some users claim to uninstall your Bluetooth, Wireless, & Intel RST(Intel Rapid Storage Technology).
We have to warn you that this issue can be caused by another driver, it doesn’t have to be related to Bluetooth or Wireless drivers, but they are often the main causes of this issue.
Searching for drivers on your own can be time-consuming. So, we advise you to use a tool that will do this for you automatically.
Using an automatic driver updater will certainly save you from the hassle of searching for drivers manually, and it will always keep your system up to date with the latest drivers.
A professional tool will help you update drivers automatically and prevent PC damage caused by installing the wrong driver versions.
Press Windows then type cmd and click the Run as administrator option from the right panel.
Paste the following command and press Enter: sfc /scannow
Restart your PC once it’s done.
The SFC scan is another troubleshooter we’re going to try here. This is a command-line tool that scans your system for potentially broken files and repairs them (if possible).
Repairing corrupt system files can resolve BSOD issues like the UNEXPECTED_KERNEL_MODE_TRAP error. So, running the SFC scan is definitely worth trying.
Tap Windows then input cmd into the search bar and select Run as administrator.
In the command line, type the following commands and press Enter after each: Dism /Online /Cleanup-image /ScanHealthDism /Online /Cleanup-image /RestoreHealth
Now, type the following command and press Enter: DISM /Online /Cleanup-Image /RestoreHealth/source:WIM:X:SourcesInstall.wim:1 /LimitAccess
Make sure to change an X value with the letter of the mounted drive with Windows installation.
After the procedure is finished, restart your PC.
Deployment Image Servicing and Management (DISM) is a tool that re-deploys the system image all over again. This can resolve various issues, including BSOD errors.
6. Install the latest updates
Press Windows + I to open the Settings app, and navigate to the Update & security section.
Now click on Check for updates button.
Windows will now check for available updates. If updates are available, Windows will download them in the background and install them.
If you’re getting a UNEXPECTED_KERNEL_MODE_TRAP error on your PC, you might be able to fix it by installing the latest updates, so be sure to try that.
7. Fix Unexpected Kernel Mode Trap using CHKDSK
The Unexpected Kernel Mode Trap error can be caused by corrupted files or hard drive failure. Therefore, running a CHKDSK scan to check your drives for errors should solve your problem.
1. Press the Windows Key + Xand choose Command Prompt (Admin),or PowerShell (Admin). They are both command line tools and serve the same function.
2. Type the following command, and then press Enter: chkdsk /r c:
3. You’ll be asked to schedule disk checking the next time you restart your PC.
4. EnterYand pressEnter.
5. Restart your PC and your computer will automatically perform chkdsk scan.
6. After the scan is complete, check if the Unexpected Kernel Mode Trap error is gone.
Some users reported that the UNEXPECTED_KERNEL_MODE_TRAP error occurred while playing League of Legends.
According to them, you might be able to fix it on your PC simply by running a CHKDSK scan. This error can occur due to corrupted files on your hard drive, but you should be able to fix it by following the above steps.
Keep in mind that you might have to scan other drives on your PC besides C in order to fix this problem, so be sure to perform the task when needed.
8. Remove your graphics card driver
According to users, your graphics card driver can be the cause of this error. Several users reported this issue with the latest Nvidia drivers, and according to them, the solution is to revert to the older drivers.
To do that, simply remove the Nvidia driver from Device Manager. If you want to remove all files associated with your graphics card, check out our tutorial on how to use Display Driver Uninstaller.
After removing the driver, Windows will install the default driver once you restart your PC. Now check if the issue reappears with the default driver.
Keep in mind that Windows can sometimes update your driver automatically in the background causing the error to reappear.
Press the Windows key + I then go to Update & Security from down the window.
Click theRecovery option from the left pane, then, under Reset this PC, click Get started.
Choose the Keep my files option and continue with the procedure.
After finishing the reset, you’ll have a fresh installation of Windows and your problem should be resolved.|
10. Uninstall Recently Installed Software
New software installations can sometimes conflict with existing system configurations, leading to unexpected errors. If you’ve recently installed or updated any software, it might be the root cause of the “UNEXPECTED KERNEL MODE TRAP” error.
To address this, navigate to the ‘Programs and Features’ section in the Control Panel. Review the list of recently installed software and uninstall any suspicious or non-essential programs. After uninstallation, restart your computer. If the error was due to a software conflict, this action should resolve the issue. Always ensure that any software you install is from a reputable source and is compatible with your version of Windows.
11. Disable Memory Caching
Memory caching is a feature that stores frequently used data in a cache to speed up processing times. However, in some instances, it can lead to system errors. To disable memory caching, you’ll need to access your computer’s BIOS or UEFI settings during startup.
Once inside, navigate to the advanced settings and look for the memory caching option. Disable it and save your changes. Remember, altering BIOS settings can impact system performance, so proceed with caution and only change settings you’re familiar with.
12. Check for Overheating
Overheating can severely impact the performance and stability of your computer. Prolonged exposure to high temperatures can damage internal components and lead to system errors.
Ensure your computer is in a well-ventilated area, free from dust and debris. Consider investing in cooling solutions, such as additional fans or a cooling pad for laptops. Monitoring software, like HWMonitor or SpeedFan, can help you keep an eye on system temperatures and ensure they remain within safe limits.
13. Check for Hardware Compatibility
Every piece of hardware in your computer, from the motherboard to the graphics card, needs to be compatible with each other and the operating system. Incompatibilities can lead to system crashes and errors. If you’ve recently added new hardware, consult the manufacturer’s specifications to ensure it’s compatible with your system and version of Windows. If in doubt, consider seeking expert advice or returning the hardware for a compatible alternative.
14. Remove New Hardware and Restart
Introducing new hardware components can sometimes conflict with existing ones, leading to system errors. If you’ve recently added a new piece of hardware, remove it and restart your computer. If the error disappears, the new hardware might be the culprit. Ensure it’s properly seated, has the correct drivers installed, and is compatible with your system.
15. Check if the Error is Caused by New RAM Memory
RAM (Random Access Memory) plays a crucial role in system performance. Faulty or incompatible RAM can lead to a host of errors, including the “UNEXPECTED KERNEL MODE TRAP.” If you’ve recently upgraded or changed your RAM, ensure it’s compatible with your motherboard and processor. Tools like MemTest86 can help diagnose RAM issues by running comprehensive tests.
16. Check for RAM Issues Using Windows Memory Diagnostic Tool
Windows offers a built-in tool to check for memory issues. The Windows Memory Diagnostic Tool scans your RAM for errors, which can be the cause of various system problems. To run this tool, type “Windows Memory Diagnostic” in the Start menu and follow the on-screen instructions. It’s advisable to close all running applications before starting the test. The tool might require a system restart to complete its analysis.
17. Check for Hard Drive Corruption
Hard drives, over time, can develop bad sectors or become corrupted. This can lead to data loss and system errors. The CHKDSK (Check Disk) utility in Windows can scan and repair issues on your hard drive. To run CHKDSK, open a command prompt with administrative rights and type chkdsk /f. The tool will scan and fix any detected issues. For a thorough scan, you might need to restart your computer.
18. Disable Memory Caching from BIOS
Similar to the memory caching feature in the operating system, some BIOS settings also allow for memory caching. This can sometimes conflict with Windows operations. To disable it, access your BIOS settings during system startup, navigate to the relevant section, and disable memory caching. Always be cautious when altering BIOS settings, as incorrect configurations can impact system stability.
19. Run CHKDSK
CHKDSK is a versatile tool in Windows that can identify and fix a variety of hard drive issues. It checks the integrity of file systems and can repair logical file system errors. To utilize CHKDSK, open a command prompt with administrative privileges. Enter the command chkdsk /f /r to find and repair issues. Depending on the size of your drive, the scan can take some time, but it’s a thorough method to ensure your hard drive’s health.
If the problem still appears, you might have to reset your PC and choose to delete your files as well. This process will delete all files from your system drive, so be sure to back them up.
We hope we cleared the situation for you with this article, and you managed to solve your problem with the UNEXPECTED_KERNEL_MODE_TRAP error.
If you have any comments or questions, just reach out to the comment section below.
The Your organization must have just greeted you manages updates on this PC message despite using a personal computer. We will explore and prefer solutions to this error.
Users encountering this issue could not check their Windows computers’ eligibility through the PC Health Check software. They were left with no other option but to check the minimum requirements for Windows 11 manually.
What does Your organization manages updates on this PC mean?
If the PC Health Check app on your machine displays this message on the screen, it could be triggered by a few factors and could mean different things, including:
Restricted admin rights – It simply means that you do not have the administrator rights of the PC or you are not logged in using the administrator account.
You do not use a personal MS account – Using a Microsoft Family account, and a parent or caretaker is set as the primary system administrator would also trigger the message.
Local accounts – On the flip side, using a local account on a Windows computer can also be the culprit behind this message since having a Microsoft account is a requirement for Windows 11.
Moreover, this issue can also present itself on Windows machines with linked business or educational accounts.
Though there are many possibilities of why this issue is presenting itself, you don’t need to be alarmed. Below are some quick and easy fixes that will definitely resolve the problem.
How can I fix the error: Your organization manages updates on this PC?
1. Use an administrator account
Click on the Start Menu and choose the Settings option.
Next, click on the Accounts tab present on the left panel of the Settings window. Then, click on the Your info tile present to the left of the window.
After that, your account role will be mentioned right underneath your account name. It should be saying Administrator; if it is not, you need to contact your system administrator to get your account upgraded to an administrator or get credentials for the administrator account.
As mentioned earlier, this issue mostly means you are not running an administrator account. Thus, the first and foremost thing you should ensure is that you have an administrator account on the system or credentials for one.
Changing to an administrator account will most likely resolve the issue. If you are already logged in with an admin account, move on to the next solutions in the list.
2. Disconnect work or school account
To disconnect work or school accounts, click the Start Menu icon on the taskbar and then choose the Settings option.
Next, click on the Accounts tab present on the left panel of the screen and then head to the Access work or school tile situated on the left side of the window.
After that, click on the Disconnect button present on the school or work account tile.
Once you have disconnected the work or school account, restart your machine from the Start Menu and run the PC Health Check app. The issue of your organization managing updates on this PC should be solved.
First, press Windows + R on your keyboard to use the Run command utility. Then, type regedit in the provided space and click the OK button. This will open a Registry Editor window on your screen.
Next, navigate to the following key using the left panel on the Registry Editor window. You can also copy+paste the following text in the address bar:
Then, double-click on the NoToastApplicationNotification file. This will open an overlay pane on your screen.
Now, enter 0 in the Value data: field and click on the OK button to confirm and close.
Finally, restart the computer using the Start Menu and check if the issue with your organization manages updates on this PC has been resolved.
4. Change Group Policy Editor Settings
NOTE
Group Policy Editor is only available on Windows Pro versions. Since this solution requires a Group Policy Editor, it only applies to a certain pool of Windows users.
Press Windows + R on your keyboard to use the Run command utility. Then, type gpedit.msc and click on the OK button or hit Enter on your keyboard.
Next, navigate to the following directory on Group Policy Editor. Now, from the right side of the window, locate and double-click on the Manage end user experience directory.
Computer Configuration/Admisistrative Templates/ Windows Components/ Windows Update
Then, double-click Configure Automatic Updates.
After that, select the Not Configured option by clicking on the radio button preceding it. Next, click Apply to confirm and click the OK button to close the window.
Now restart your Windows machine and run the PC Health Check app to see if the issue with your organization manages updates on this PC has been resolved.
Since this solution requires a Group Policy Editor, it only applies to a certain pool of Windows users. Though for non-pro users, there are plenty of other reliable solutions.
5. Change Diagnostic data settings
First, click on the Start Menu button from your computer’s taskbar and choose the Settings option from the flyout.
Next, click on the Privacy & security tab from the window’s left sidebar. Then, click on the Diagnostic & feedback tile present to the right of your screen.
After that, locate the Send optional diagnostic data section and then toggle the switch to the On position.
Restart your PC and run the PC Health Check app. Your issue with your organization manages updates on this PC should be resolved by now.
If the issue presents itself due to insufficient data being sent to Microsoft, changing Diagnostic data will resolve the problem.
6. Enable telemetry
To do so, press the Windows+R shortcut on your keyboard to bring up Run command utility. Then, type services.msc in the space provided and click on the OK button.
Next, locate the Connected user experience and Telemetry option from the services window and double-click on it to open. This will open a separate window on the screen.
Now, click on the drop-down menu situated adjacent to the Startup type field and select the Automatic option.
Then, click on the Apply button to save the changes and click on the OK button to close the window.
Now, reboot the Windows machine from the Start Menu and run the PC Health Check app.
There has also been a pool of users complaining about the non-accessibility of settings and the above-mentioned issue. If that’s also the case with you, check out issues with settings that your organization manages.
And that is it, Your organization manages updates on this PC, so it should no longer be an issue for you.
If you still have questions or suggestions, do not hesitate to let us know using the comments section below, and we’ll get back to you as soon as possible.
The Intel Driver Utility download has gone through major changes. The original Intel Driver Update Utility is now outdated and no longer supported. In this guide, we’ll show you how to use both the modern Intel Driver & Support Assistant (DSA) and the legacy utility for older systems. Whether you’re updating new hardware or maintaining an older PC, you’ll find step-by-step help right here.
Press the Windows + E keys to open File Explorer. By default, the .exe file should be in the Downloads folder, then launch it.
Check the I agree to the license terms and conditions, then click the Install button and confirm the UAC prompt.
Wait for the installation to complete and click Restart to effect the changes.
Left-click the Start button, search for intel driver & support assistant and launch it.
Click Download all and check the box for I understand and wish to proceed.
Then click Install all and wait for the process to complete.
Also, the utility will inform you once there are new updates via your device’s notification.
This is the best way to get Intel’s driver updater and use it. So, we recommend that you follow the steps strictly for optimal results.
Option 2: Download and Install Intel Driver Utility (the Legacy Version)
NOTE
The legacy Intel Driver Update Utility is no longer supported by Intel and hasn’t been updated since 2017. It should only be used on older systems (pre-2017) where the new Driver & Support Assistant no longer works. Use it with caution, and only download it from reputable sources. Installing outdated or incorrect drivers can lead to system instability or hardware conflicts.
What can I do if the Intel Driver and Support Assistant installation fail?
Many factors can cause the Intel Driver and Support Assistant installation to fail on your PC. Factors such as an outdated Windows operating system, low disk space, startup errors, etc., can cause issues with the installation.
If you experience more issues, go on with the solutions below:
Many people reported that some keys are not working in Windows 11, particularly on laptops. If you are among them, don’t worry. The issue is pretty trivial and easy to fix.
Outdated or corrupt drivers, faulty device settings as well as dusty hardware could lead to this. Just follow the steps below to see how you can make all of your keys work again.
What to do if some keys on the keyboard are not working in Windows 11?
Before you delve into the fixes, check these three elements:
Restart the computer, as a reboot could help correct some minor device issues.
Blow dry air through the keyboard if dust or particles are stuck underneath.
If you are sure it is a hardware issue, you may replace the keyboard and save the stress of these solutions.
1. Run the Keyboard troubleshooter
If Windows 11 arrow keys are not working, or even the other keys, you should run the built-in troubleshooter. Microsoft offers several of these to help automatically identify and fix issues preventing the system and connected devices from working effectively.
1. Press Windows + I to launch the Settings app.
2. Navigate to the System tab.
3. Scroll down to the Troubleshoot section.
4. Click on Other troubleshooters.
5. Now, locate the Keyboard troubleshooter, and click on the Run button next to it.
6. Follow the on-screen instructions and choose the appropriate response when prompted to complete the process.
7. Check if the keyboard is working properly now.
2. Reinstall the keyboard driver
Press Windows + S to launch the Search menu, enter Device Manager in the text field at the top, and click on the relevant search result.
Double-click on the Keyboards entry to expand and view the devices under it.
Right-click on the malfunctioning keyboard, and select Uninstall device from the context menu.
Click Uninstall in the confirmation prompt that pops up.
Now, restart the computer, and Windows will automatically install a fresh driver for the keyboard.
If the currently installed driver for the keyboard is corrupt, you may find that some keys are not working. In this case, you should reinstall the driver. To identify a corrupt driver, look for a warning sign near the corner of the device icon.
Alternatively, you can use a third-party tool such as Fortect Driver Updater. This will automatically install the latest driver updates and keep them all in check.
4. Run a scan for malware
Press Windows + S to launch the Search menu, enter Windows Security in the text field, and click on the relevant search result.
Click on Virus & threat protection.
Next, click on Scan options to view all the available ones.
Select Full scan and then click on the Scan now button at the bottom.
5. Modify keyboard settings
Press Windows + I to launch the Settings app, and select Accessibility from the tabs listed in the navigation pane on the left.
Scroll down and click on Keyboard under Interaction.
Now, turn off the toggle for Sticky keys and Filter keys.
Once the changes are made, restart the computer for these to fully effect.
The Sticky keys feature keeps modifier keys, namely Ctrl, Shift, amongst others, to remain active even after you release them. On the other hand, when the Filter keys feature is enabled, the keyboard will ignore when keys are repeatedly hit to help users with hand tremors type.
But, these two may make it appear as if Windows 11 shortcut keys are not working. Thus disabling them could fix the problem.
In case you have a problem with the Ctrl key, we have a great guide on what to do if Ctrl key is not working, so we encourage you to check it out.
6. Check if a certain set of keys is disabled
6.1 Function keys not working in Windows 11
The function or F-keys perform a dual role, allowing you to use them both in their designated role and the one configured on your system. It could be either multimedia or increasing and decreasing the brightness and volume.
If the F-keys are unlocked, they will generally perform the other role, as highlighted on the F-key itself, and it will seem like Windows 11 function keys are not working.
On the contrary, if the F-keys perform the role to change the volume, it would appear as if Windows 11 volume keys are not working, with the function key locked.
Many keyboards have a separate set of number keys to the right, often referred to as Numpad or the number pad. This imitation of a regular calculator allows users to input numbers quickly. But many find the number pad to be not working in Windows 11.
This is generally because the number pad is locked. And to unlock it, you will have to hit the Num Lock key on your keyboard. Also, a small light on the keyboard could indicate when the number pad is locked and when it’s working.
Besides, when the number pad is locked, the keys here will function as the arrow keys, which indicates that the set is locked.
These are all the fixes you can try if your Windows 11 keyboard is not working, and one of these should help eliminate the issue. Remember never to discard a malfunctioning keyboard right away.
Windows 11 is here, but that doesn’t mean the bugs disappeared overnight. After an update or even a simple restart, many users looked at their taskbar only to find it empty and unusable.
Microsoft has issued a workaround for this problem, but it’s still a matter of fixing this before doing more harm. We added some solutions that worked for our readers, so read below and try them out right now.
Why is my taskbar empty in Windows 11?
Judging by the workaround supplied by Microsoft, which you will find in our first solution below, this problem was caused by a minor component. However, there are other causes as well:
IrisService – It’s a file that is part of the Windows Spotlight service that is used to bring you some tips, suggestions, and promotions on the Lockscreen window. You may disable it altogether as well as other non-essential services.
Windows Explorer process – It is a process that manages and offers the graphical user interface (GUI) that you use to interact with the majority of Windows’ features. So you can expect this to be the culprit to the Windows 11 taskbar being an empty issue.
Windows Updates – Although updates bring new exciting features and bug fixes, they can cause other bugs. This can be the case with the empty taskbar situation, and all you have to do is uninstall the latest update.
This being said, let’s jump into the list of solutions below.
How do I fix the blank taskbar in Windows 11?
1. Make a change in the Registry
If you encounter issues such as Windows 11 taskbar empty error, an effective method you can try is to change your Registry using the following steps.
1. Press the Ctrl + Alt + Del keys to open Task Manager, then select File followed by Run new task.
2. Type cmd and press Enter or click OK.
3. Paste the following command and press Enter to run it: reg delete HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\IrisService /f && shutdown -r -t 0
4. The PC should reboot after this command, and after restarting, the Windows 11 taskbar greyed-out issue will be solved.
2. Restart Windows Explorer
Press Ctrl + Alt + Del to access Task Manager.
Click Windows Explorer, and choose Restart.
Once it’s done, check whether the Windows 11 taskbar not working issue persists.
3. Run SFC and DISM
Press Windows, enter cmd in the search bar, then click Run as administrator.
Type the following command, then press Enter and wait for the scan to finish: sfc /scannow
Once the SFC scan is over, type the following command and press Enter. Reboot your computer once the DISM scan has ended: DISM /Online /Cleanup-image /Restorehealth
After the scan is finished, check if the problem is still there.
Press the Windows key, then type control and click the top result.
Choose Clock and Region.
Click the Set the time and date button.
Click the Change date and time settings button.
Select a date in the future, then click OK.
Switch to the Internet Time tab and click on the Change settings button.
Turn off the Synchronize with an Internet time server option, then click OK.
6. Use PowerShell
Press Windows key + X and select Windows Terminal (Admin).
Now run the following command: Get-AppXPackage -AllUsers | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”}
Once the command is executed, restart your PC.
We hope our guide helped you fix the empty Taskbar issue in Windows 11, and now you’re using your OS in normal conditions. For more information, follow our guide on how to fix Windows 11 Taskbar blank icons.
If you have other suggestions or need more information, don’t hesitate to access the dedicated comments section below to leave us a line about that.
Several of our readers claim they have been trying to install the 2022-10 Cumulative Update for Windows 10 Version 21H2 for x64-based systems KB5018410 without success.
Since KB5018410 not installing is giving a lot of our readers headaches, we have prepared some fixes for this error.
Why are Windows 10 cumulative updates not installing?
There can be several reasons why cumulative update for Windows 10 version 21H2 is not installing. Below are some factors that can hinder the updates:
Poor internet connection – This is one of the primary reasons for these errors. You should ensure that you are correctly connected to the internet.
The updates won’t install after a restart – The update may get stuck after trying to perform a restart. Hence, the cumulative update for Windows 10 version 21h2 is stuck.
2. Roll back and uninstall a bad update with System Restore
Open the Start menu, and click on Settings above the Power button.
Next, click on Update & Security.
In the new window, select View update history to check the last successful update installed on your Windows.
Next, click on Uninstall updates at the top.
You can decide to uninstall any of these but do so with caution so as not to uninstall critical updates, which may lead to a computer full of bugs.
Once you are done, restart your PC.
After completing the system restore, your PC should work correctly.
The above fix means you have created a restore point to which you now want to revert. If you can’t find the restore point, you may need to create another manually.
Press the Windows key, search for control panel, and launch it.
Expand the Network and Internet option and click on Network and Sharing Center.
Click on Change adapter settings in the left pane.
Right-click your network connection and choose Properties from the drop-down menu.
Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
Select Use the following DNS server addresses, type 8.8.8.8 as a Preferred DNS server, and type 8.8.4.4 as an Alternate DNS server.
Click OK to save changes.
At times, it may be that your default DNS is causing the KB5018410 not installing problem. Hence, changing your DNS should fix the cumulative update for Windows 10 version 21h2 if it fails to install.
4. Factory reset your PC
Press the Windows key + I to open the Settings app.
Navigate to the Update & Security section.
Go to Recovery and click Get Started.
Choose the Keep my files option.
Select Cloud download or Local reinstall (Local reinstall is faster, so we recommend it)
Follow the instructions on the screen to complete the process.
But before you do this, make sure you back up your data on an external drive to avoid losing what’s important to you.
Moreover, ensure you write down your product ID in a safe place before performing the re-installation.
Blue Screen of Death errors are one of the most serious types of errors that you can get on Windows 10, and since these errors are commonly caused by faulty hardware they can be hard to fix.
Many users reported getting the Driver Verifier Detected Violation error, and today we’re going to show you how to fix it.
What is Driver Verifier Detected Violation error?
The Driver Verifier Detected Violation error is often brought on by defective drivers or hardware. Some of its common causes are the following:
Outdated drivers – Although outdated drivers may not directly contribute to BSOD errors, the interactions that these drivers have with your operating system do. When you update your Windows operating system, your older drivers may become incompatible.
RAM issues – There are other components of the computer than the hard drive that are capable of triggering blue screen of death issues. These faults can also be caused by slots that are not properly fitted in a number of other components, most notably the RAM.
Driver Verifier running for no reason – This program substitutes the default operating system subroutines with ones that were built expressly to catch vulnerabilities in device driver software. Misfitted detections can lead to Msdn bugcheck driver_verifier_detected_violation.
Without further ado, let’s jump into the list of solutions!
How can I fix the Driver Verifier Detected Violation error?
Before moving on to more advanced troubleshooting solutions, make sure to do the following:
Check your RAM for any physical damage as this is one common cause of this error.
Run a virus scan on your computer to make sure it is not infected with malware.
1. Enter Safe Mode and deactivate Driver Verifier
To fix the Driver Verifier Detected Violation loop, click the WindowsStart icon and select Settings.
Next, go to System, then select Recovery.
Next to the Advanced startup option, click on the Restartnow button.
Your computer will restart then show the Advanced options screen. Here, select Troubleshoot.
Next, select Advanced options.
Click Startup Settings.
Lastly, click the Restart button.
Once your PC reboots, press the F4 key to get into Safe Mode.
Next, press Windows + R, enter verifier, and click OK.
Next, select the Delete existing settings option and click Finish. Reboot your computer to apply the changes made. The Driver Verifier Detected Violation on Startup issue will also be fixed afterward.
2. Update drivers
Press Windows + I to open Settings then go to Windows Update and select Advanced options.
Next, select Optional Updates.
Here, expand the Driver updates section, select all the updates listed and click Download and Install. The DRIVER_VERIFIER_DETECTED_VIOLATION when shutting down issue will be solved.
These tools are equipped with powerful features that allow them to quickly scan your computer, identify the correct version of the driver you need, and then prompt you to download it.
3. Run System Restore
If you get Driver Verifier DMA VIOLATION, press Windows + R then type rstrui and press Enter.
Click Next to proceed. Then select the restore point to which you wish to revert to and click Next.
Follow the on-screen steps to revert your system to the selected restore point. If you don’t have any restore points, check out how to create one.
Driver Verifier Detected Violation error can cause problems, but hopefully, you managed to fix this error by using one of our solutions.
If you have additional comments or suggestions, please let us know in the comments section below.
The Settings app is one of the most important Windows 10 features because you control the whole system with it.
Basically, if you want to change most of the features in your OS, you are usually going through this app. And if it stops working, you can have serious issues.
What causes Settings not to open?
There can be a lot of reasons for which the Settings app won’t open in Windows 10 and just as many for which it won’t launch in Windows 11. Depending on their complexity, we outlined a few of the possible issues.
➡ An OS update – Sometimes, this problem manifests after a Windows update although before it worked just fine. The solution here is to roll back the update that caused the issue.
➡ Corrupted app – When it happens out of nowhere, without obvious reasons, the problem is usually caused by the corruption of the app by power outages, malware, or similar factors but the solutions below will help you fix it.
➡ Glitches and junk files – Too many junk files on your PC can cause serious damage in time but can also be responsible for this problem. Cleaning the unnecessary files from your PC is a must in this situation.
➡ System bugs – Sometimes, the system can be influenced by third-party corrupt apps and a simple uninstall or a reboot can get things back to normal. Booting in Safe Mode is also a solution because it prevents third-party apps from loading.
To boot in Safe Mode you just need to hold the Shift key while clicking the Start button, then the Power option, and selecting Restart.
In this case, you should be able to use Windows Startup Repair to recover your Settings apps.
How do I fix Windows Settings won’t open?
1. Run the SFC/scannow command
1. Click the Start button to open the Windows Search box.
2. Type cmd in it and select Run as administrator to start Command Prompt with full privileges.
3. Enter the following line and press Enter: sfc/scannow
4. Wait until the process is done.
5. Close Command Prompt and restart your computer. To do that, click the Start button, select the Power button, and chooseRestart.
The SFC command will completely scan your computer for issues, and it will provide a suitable solution (if available)
So, it will for sure cover the Windows Settings app not opening problem, and besides that, it may solve some problems that you even didn’t know about.
If you have problems with the SFC process, we’ve got a guide that will help you learn what to do if the scannow command stops before finishing the process.
2. Use Powershell to reinstall preinstalled apps
Right-click the Start button and select Windows PowerShell (Admin) from the list.
Type or paste this code and press Enter to run it: powershell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\ImmersiveControlPanel\AppxManifest.xml
This process might take a while, so make sure that you wait until it’s finished.
3. Run DISM
Click the Start button, type cmd and choose Run as administrator to start Command Prompt with full rights.
Type in the following command and press Enter: DISM.exe /Online /Cleanup-image /Restorehealth
Wait for the process to finish, then click the Start button, select the Power button and choose Restart to reboot your PC.
Deployment Image Servicing and Management (DISM) is another built-in troubleshooting tool from Windows.
As its name says, DISM deploys the system image all over again, refreshing all the system features on the way, including the Settings app. Do not hesitate to learn what to do if DISM fails before finishing the process.
4. Update Windows
Click the Start button and type update, then select Check for updates from the results.
Now, click the Check for updates button. If there are any new updates, the system will download and install them.
Microsoft usually releases patches and fixes for various system problems through Windows Update.
The solution above still directs you to the Settings app so if you still can’t access it, the only solution you have in this case is to install the updates manually.
Go to the Windows Update Catalog page, find the latest update for your version of Windows 10, and follow further instructions to download the update directly.
Click the Start button, type cmd and select Run as administrator to start Command Prompt with full privileges.
Type or paste the following command and press Enter to run it (make sure you replace username and password with the user name and password of your choice): net user /add username and password
Now give it administrator privileges by entering the following command and press Enter (make sure you replace username with the name of the user you created earlier): net localgroup administrators username /add
Now login with the new user you just created and try to open the Settings app again.
If your user account is broken or corrupted, you may not be able to access all the Windows 10 features. The same thing may happen if you’re using a user account that doesn’t have administrative rights.
So, make sure that your account has all the necessary permissions to access the Settings page. If not, you can create a new account and check if this solved the problem.
What can I do if Windows 10 Settings won’t open in Safe Mode?
Press and hold the power button to force your computer to shut down (You may need to perform this action more than once).
Once your computer boots into the blue screen, select Troubleshoot among the options.
Next, go to Advanced options and choose Startup Repair.
Introduce the credentials associated with your user account and proceed with the Startup Repair.
If the Windows Settings won’t open (not even in Safe Mode), you should be able to recover them with this method.
Are there any other possible issues with the Settings app?
Here are some more examples of similar issues you can resolve with the same solutions:
Windows 10 Settings app won’t open – The most common issue with the Settings app in Windows 10 is when you just click the icon, but nothing happens.
Windows 10 Settings app missing – In some cases, you won’t be able to even locate the Settings app icon, as it completely disappeared from the Start Menu.
Windows 10 Settings app crashes – Another common issue is when you’re actually able to open the Settings app, but it crashes immediately upon launch.
Windows 10 Settings grayed out – And the least common (but still possible) scenario is when the Settings app icon is just grayed out in the Start Menu.
How can I quickly open the Settings app?
Sometimes, just a way of opening the Settings app might be the problem, so trying out different methods may lead to success. That’s why we encourage you to check a few more suggestions:
Use the Start button
This is the most simple way of doing it. Just click the Start button and select Settings.
2. Use the Search function
A close runner-up solution is to click the Start button, then type settings and open the app from the results.
3. Right-click the Start button
It’s also easy to right-click the Start button and select Settings from the list of options.
4. Use the Settings shortcut
You can also open the Settings app by using the Windows key + I shortcut from your keyboard. It’s extremely fast and effective.
Try to remember it because if you find yourself in a situation where the mouse is not responding or the screen is frozen, this might be the only method left.
5. Use the Run app
Press the Windows key + R to start the Run app.
Type ms-settings: (include the : character at the end. It’s not a mistake) and press Enter or click OK.
6. Use Command Prompt
Click the Start button, type cmd and select Run as administrator.
Type start ms-settings: and press Enter to run it.
Of course, there are many ways to open the Settings app. For instance, you can also ask Cortana to open it, but the important thing is to actually work.
What does Windows cannot find ms-settings mean?
Several of our readers encountered the message when trying to start Settings from the Command Prompt console: Windows cannot find ms-settings. Make sure you typed the name correctly, and then try again.
Luckily, this is just a simple typing error. The correct command is startms-settings:. Without the semicolon symbol (:) at the end, you get this error.
We hope that our solutions helped you solve the Settings app problem in Windows 10 and now everything is back to normal. Now, the Settings app can be just one side to the story. If no Windows 10 programs seem to work, you might want to take your troubleshooting even further.
If this issue occurred after a Windows update, make sure you installed any patch after it because Microsoft may have already released one.
Even if you still can’t access the Settings, you will get a notification in the system tray and you might be able to get it from there.
Now that you fixed the Settings app in Windows 10, you might be interested in the best Windows 10 optimizer software that can solve system issues and make your PC run faster.
For more questions and suggestions, reach out to the comments section below and we’ll be sure to take a look.
A red X next to OneDrive usually means sync issues, a paused account, or missing files. To fix it, check your internet, ensure you’re signed in, and restart OneDrive. Also, verify you have enough storage and permissions and that OneDrive is in sync.
Here’s how:
How do I fix red X on files and folders?
1. Sync OneDrive with your Microsoft account
1. Click the OneDrive button in the bottom-right corner of the taskbar, then select the Settings option.
2. Select the Unlink this PC option.
3. Click on the Unlink account button.
4. Write your email account for your OneDrive account in the wizard, then click the Sign-in button.
5. Type your account password. Select the Sign-in button and then click Next.
6. Continue with the on-screen directions or close the window. The Red X on SharePoint folder issue will be solved.
If you’re experiencing seeing red X on files on your PC, the first thing you need to do to try and fix the problem is sync OneDrive with your Microsoft Account. You can do this via OneDrive’s built-in Settings.
A few users reported that they couldn’t unlink their accounts using our instructions. Instead, they had to go to Settings and select My account from there.
Other components are affected by this issue, and a few of our readers reported the red x on the volume icon, but this is most likely a hardware or a driver issue.
A few readers reported a variation of this problem in the form of blank desktop icons on Windows, but this issue can be easily resolved by following the instructions from this guide.
2. Check your OneDrive storage
Go to the OneDrive menu, and select Settings.
Click on Choose folders.
Uncheck the folders that you don’t want to upload on OneDrive. The OneDrive red X issue will be solved.
If everything is ok with syncing your Microsoft account to OneDrive, it is possible that the culprit is the lack of space in the cloud.
This usually happens if users upload automatically all files and folders in OneDrive.
You must either update the app for OneDrive, Dropbox, or any other cloud service and if it does not solve the problem, you must delete the software and then reinstall the most recent version of it.
This is the last resort if the two solutions above do not work for you. You can opt to use one of the 7 best uninstaller software in order to completely remove the cloud service from your PC.
Why is OneDrive not syncing?
It’s possible that your OneDrive won’t sync correctly across all of your devices due to troubles with the Internet, incorrect passwords, or a simple flaw in the system.
In rather rare cases, it can be an issue across all OneDrive accounts; in this case, you only have to wait until the app developers address the issue.
Did you find our solutions helpful? Let us know in the comments section below.
Yup, it’s another servicing pipeline build for the Windows 11 Insider Dev Channel. This one, build 25236.1010, or KB5021116, comes at the heels of Wednesday’s 25236 Dev Channel update. As usual, there’s nothing new in this servicing pipeline build, and is “esigned to test our servicing pipeline for builds in the Dev Channel.”
A small servicing update for #WindowsInsiders in the Dev Channel. Build 25236.1010 is available. This update does not include new content and is designed to test our servicing pipeline. https://t.co/uZBAcnRefs ^BLB
As a reminder, build 25236 added tips on how to use the Search Box, included a bunch of fixes, and introduced some new stuff for the Microsoft Store app. Feel free to go ahead and help Microsoft test how new builds are deployed by downloading and installing this latest attempt to service the pipeline!
If your PC won’t boot and stays stuck in a restarting loop, you’ll have to address corrupt system files, problematic updates, and possibly disable interfering startup apps.
To access such settings and tweaks, you’ll most likely have to access Windows in Safe Mode. Below, we’ll walk you through all the steps necessary to start your system correctly. Just follow along.
How to stop the PC from being stuck on restarting?
Power cycle your computer: Hold the power button for 5–10 seconds, unplug it, and disconnect all peripherals. Wait 1 minute, then restart.
If the issue continues, read on.
Quick Video Summary of the Steps Needed to Fix Laptop Stuck On Restart
1. Boot the computer in safe mode
Long-press the power button of your computer until you’re completely sure it shuts down.
Wait a few seconds, then turn it back on.
When booting starts, pressF8 repeatedly until you get the Advanced Boot options.
Select Startup Settings.
Type F4 to enable Safe Mode, then clickRestart.
If stuck on restart, try entering Safe Mode. This will only load essential system files and drivers. The PC might boot because no third-party apps that might interfere will be used.
2. Run an SFC scan
Search for Command Prompt in the Start menu.
Right-click on it and select Run as Administrator.
Type sfc/scannow and Press Enter.
The System File Checker (SFC) will identify and fix corrupt system files which can cause Windows being stuck on restart.
3. Revert recent updates
Search for Control Panel in the Start bar.
SelectRecovery.
Select Open System Restore.
HitNext in the incoming window.
You’ll get a list of all Restore Points saved. Select one from a date before the day you updated your OS and click Next to confirm.
Confirm your choice and wait for the process to complete.
This will restore your PC to the state it was before you updated it. So if it started being stuck on restart after an update, this trick should fix it.
If this is the case, but you still want to update your OS, check the following solution.
4. Restart the stuck update
Press Windows + R to open Run, type cmd, and press Ctrl + Shift + Enter to open Command Prompt with administrative privileges.
Click Yes in the UAC prompt.
Type the following command and press Enter: net stop wuauserv
Now, input the following commands and press Enter after each: cd %systemroot%ren SoftwareDistribution SD.oldnet start wuauserv
If the computer is stuck restarting during/after update, reinitiating the process should do the trick.
5. Disable startup apps
If the laptop is restarting for a long time, press Ctrl + Shift + Esc to launch the Task Manager, and select the Startup apps tab from the left.
Locate the programs that read Enabled under the Status column, select them, and click on Disable.
While disabling startup apps, keep two things in mind. First, disable all third-party apps that appear in the list.
Second, if any critical program or process is listed and enabled, keep it that way. This should fix the Windows 10 is stuck on restarting issue.
6. Check the RAM
Run the built-in Windows Memory Diagnostics tool. It helps identify issues with the RAM and automatically fixes things.
For a more detailed investigation of RAM issues, you could run Memtest86+, an open-source tool that runs many tests on the memory sticks, even individually, and lists each problem.
If the RAM is faulty, replacing it should get things running if the computer keeps restarting randomly.
7. Update your drivers
If the computer is taking forever to restart, pressWindows + Xand choose Device Manager.
Select a category to see the names of devices under it.
Now, right-click on the one you believe is causing the problem and select Update driver.
Select Search automatically for drivers and wait for Windows to automatically locate the best driver on the computer and install it.
Repeat the process for all devices.
A driver conflict might cause Windows getting stuck on restart. Updating device drivers might get rid of the issue.
1. Press Windows + R to open the Run dialog box, enterControl Panel in it, and then click on OK.
2. Click on the View by dropdown menu and select Large icons from the list.
3. Choose Troubleshooting.
4. Select View all from the left.
5. Click on System Maintenance.
6. Follow the other on-screen prompts to complete the process.
7. Once done, verify if the computer keeps restarting randomly. If yes, try the next solution.
If your computer is stuck restarting, you should try using the Windows Troubleshooter. All Windows PCs have a built-in Troubleshooter that can detect and fix problems on your PC and it’s likely to solve your problem.
9. Update the BIOS
If nothing so far has worked, and the Dell/HP/etc.. laptop is stuck on restarting, you should update the BIOS.
This is an intricate and critical process, so we recommend you practice extra caution and follow the steps as it is. For more help updating the BIOS, read the instructions on the OEM’s website.
The methods listed above should fix things when the computer keeps restarting randomly. Also, you may try reinstalling Windows if you are sure it’s a software-related issue.
After fixing the restart loop or reinstalling the new OS, we recommend to boost your Windows PC’s performance just to make sure you avoid similar problems in the future.
Many reported that the Xbox app won’t let them sign in. Could be a Xbox services issues, local files problem or even faulty credentials. Find below working solution to address this login problem.
What can I do if Xbox app won’t let me sign in?
? Removing recent updates, such as KB5034441, and installing them again can help. Ensure that all Xbox services are starting with Windows to eliminate potential issues. Also, check your account settings on Xbox.com and, if necessary, request a password reset.
If you’re still can’t sign into your Xbox account, check the more advanced fixes below:
1. Reinstall Gaming Services
Press the Windows key + X and choose Windows PowerShell (Admin).
Run this command in order to remove Xbox Gaming Services: get-appxpackage Microsoft.GamingServices | remove-AppxPackage -allusers
After that, run start ms-windows-store://pdp/?productid=9MWPM2CQNLHN
When Microsoft Store starts, choose the option to install Gaming Services.
If you don’t feel comfortable reinstalling Gaming Services, you can restart them by running these commands:
sc stop GamingServices sc start GamingServices
2. Make sure that Xbox services aren’t disabled
1. In the Search bar type services, then select the Services app from the list of results.
2. Scroll to the bottom of the list and locate the following services: Xbox Live Auth Manager, Xbox Live Game Save, Xbox Live Networking Service.
3. Double-click the Xbox Live Auth Manager service to open its properties.
4. Find the Startup type section and make sure it’s set to Automatic. If the service isn’t started, click Start to start the services. Save changes.
5. After you’ve done, do the same for Xbox Live Game Save and Xbox Live Networking Service.
Lastly, check if Xbox services are starting with Windows by doing the following:
Press Ctrl + Shift + Esc to open Task Manager.
Go to the Startup tab.
Locate Xbox App Services. If it’s set to Disabled, right-click it and choose Enable.
3. Clear the local Xbox identity data
Open File Explorer using the Windows key + E shortcut. In the address bar paste the following line: %userprofile%\AppData\Local\Packages\Microsoft.XboxIdentityProvider_8wekyb3d8bbwe\AC\TokenBroker
If there are Accounts and Cache folders available make sure that you delete them.
After removing the cache, try to start the Xbox app again.
Avast Driver Updater is a device management tool that helps to detect missing, old, corrupt, or outdated drivers in your PC.
Also, it fixes them to work smoothly with connected devices such as printers, scanners, and other devices. We also have a recommended list of the best Windows 11 driver updaters.
Is the Avast Driver Updater free to use?
The Avast Driver Updater is a paid product that requires a subscription to use. However, new users are allowed a free trial of all the software features for a limited time.
Once the free trial expires, you’ll need to pay for a subscription to use the software features.
How do I download and install the Avast Driver Updater?
Before installing the driver updater, ensure you do not have other security software running on your computer. Doing so may hinder the updater from working.
However, if you do, uninstall it and reboot your computer to allow the updater to run smoothly.
The computer has rebooted from a bugcheck is one of the Blue Screens of Death errors in Windows 11. As the name indicates, this error occurs after having performed a reboot.
The primary causes of the error include outdated or corrupt system drivers, memory issues or insufficient primary storage. To detect and fix these problems, you need to run Mdsched.exe to check the memory.
Any of the above may make your system freeze, enter a booting loop, restart frequently, or even crash completely. Running a BSoD fixer tool is always a good idea but you might want to see some more helpful steps.
How do you fix the computer has rebooted from a Bugcheck?
1. Uninstall and reinstall drivers
Press the Windows key + R, type devmgmt.msc, and click OK to open Device Manager.
Double-click any option from which you want to remove drivers to expand it.
Now, right-click on the faulty driver and select Uninstall device.
Now, click the Uninstall button to confirm the action.
Finally, restart your PC and the driver will be reinstalled automatically.
If you have recently installed a peripheral device on your computer, it is a good idea to remove it first. Next, you need to uninstall the device from the Device Manager to fix the computer has rebooted from a bugcheck 0x00000d1 issue.
Take note of your graphics and audio drivers especially as they have been reported to cause the problem.
If you can’t manage to remove them without any problems, you can also pick a dedicated tool from our list including the best driver removal software.
2. Update your drivers
1. Launch Device Manager.
2. Double-click any option (Disk Drivers, Keyboards, Mice, etcetera) you want to update drivers for.
3. Right-click each of the drivers there and select Update driver.
4. Select Search automatically fordrivers.
5. Install the available updates after the scan is complete.
If you have not updated your drivers for long, they might be the cause of the computer has rebooted from a bugcheck with the error code 0x00000116, and when you get the error on Server 2012.
The first way to update your drivers is via Device Manager and it takes very few minutes.
Aside from using the built-in driver updater, you can download and install the drivers from the manufacturer’s website. However, there is always the risk of installing the wrong drivers.
To prevent this, we advise you to use a dedicated tool, such as Fortect Driver Updater. This software will update your drivers automatically with the latest options from a large, always-updated database.
Press the Windows key + R to start the Run utility and type mdsched.exe.
Press Enter or click the OK button.
Click on one of the options from Restart now and check for problems or Check for problems the next time I start my computer.
If this does not work, you can use MemTest to check your memory for errors.
The computer has rebooted from a bugcheck 0x50, event id 1001 error can also be caused by a memory fault, so you should check your memory by performing this troubleshooting as instructed above.
Press the Windows key, type restore, and click on Create aRestore Point option.
Click on the System restore button.
Click the Next button when prompted.
Select a point that was created before your computer started to crash and click Next.
Read the warning message and click on Finish.
Wait for the restore point to restore your PC to an earlier state where it was working without any issues.
Using a previous restore point can bypass this problem completely but you might not find a useful one. After you manage to clear the problem, don’t forget to create a new restore point to have at hand for the next time your device runs into a problem and needs to restart.
Here are the most common scenarios when you encounter a bugcheck BSoD:
Various Windows versions: the computer has rebooted from a bugcheck Windows 11
the computer has rebooted from a bugcheck Windows 10
Servers: the computer has rebooted from a bugcheck Server 2012
the computer has rebooted from a bugcheck Server 2016
Specific events: the computer has rebooted from a bugcheck Event ID 1001
the computer has rebooted from a bugcheck 0x00000d1
the computer has rebooted from a bugcheck memory DMP
Thumbnails are helpful, but unfortunately, many reported that thumbnail previews are not showing in Windows 10. Many others complained that folder thumbnails are not showing in Windows 11 either. Here, we will show you how to fix this issue permanently on your PC.
Why are my thumbnails not showing the pictures?
Here is why Windows 10 thumbnails are not showing:
Wrong File Explorer Options settings or bugs within the app
Broken or corrupt system files, or issues with the folder settings
Press Windows key + X and choose PowerShell (Admin).
Type the following command and press Enter: sfc /scannow
Wait for the scan to complete. Note that this process can take up to 15 minutes, so don’t interrupt it.
4. Use Disk Cleanup to remove your thumbnails
Press Windows key + S and enter disk cleanup. Select Disk Cleanup from the menu.
Once Disk Cleanup starts, you’ll be asked to select the drive you wish to scan. Select your System drive. By default, it should be C, and click on OK.
Wait while Disk Cleanup scans your drive.
Check the box for Thumbnails from the list and click on OK. A few users are also suggesting selecting Temporary files, so you might want to do that.
If you’re an advanced user, you can remove the thumbnail cache by using Command Prompt as shown below:
Now open Command Prompt as administrator.
Type the command below and press Enter: taskkill /f /im explorer.exe
Now, type the following commands and press Enter after each: cd /d %userprofile%\AppData\Local\Microsoft\Windows\Explorer attrib -h thumbcache_.db del thumbcache_.db
After running these commands, restart your PC and check if the problem still appears.
This solution can also be useful to take care of PDF thumbnails that are not showing on Windows PCs. Such issues may affect any type of file and prevent the user from organizing their desktop and local files.
Press Windows key + R enter gpedit.msc, and click on OK.
In the left pane, navigate to User Configuration and then Administrative Templates. Lastly, select Start Menu and Taskbar.
In the right pane, locate and double-click Turn off taskbar thumbnails.
Select Disable. Now, click on Apply and OK to save changes.
There’s also another method you can use to fix the missing thumbnails. To do that, follow these simple steps:
Start Group Policy Editor.
In the left pane, navigate to User Configuration. Expand Administrative templates and select Windows components. Next, click on File Explorer.
In the right pane, double click the Turn off the display of thumbnails and only display icons.
Now, select Not Configured or Disabled. Finally, click on Apply and OK to save changes.
Once you change these settings, check if thumbnail previews not showing in Windows 10 issue is still there.
8. Scan your system for spyware
Press the Windows key + I to open the Settings app. Select the Update & Security option.
Click Windows Security in the left pane.
Choose Virus & threat protection.
Now, select Scan options.
Finally, click the Scan now button.
To perform a detailed scan, we will recommend using dedicated antivirus software, such as TotalAV. This tool uses cutting-edge technology and advanced machine learning to detect and remove the most stubborn malware on your PC.
9. Set a different default application for affected files
Right-click the problematic file and choose Open with. Next, select Choose another app from the menu.
Select the desired application and check Always use this app to open files option.
Now, click on OK to save changes.
After making these changes, check if the problem is resolved.
10. Modify your registry
Press Windows key + R, type regedit, and click OK.
In the left pane, navigate to the left pane: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
In the right pane, look for DisableThumbnails DWORD. If the DWORD isn’t available, right-click the space in the right pane and choose New and then select DWORD (32-bit) Value.
Enter DisableThumbnails as the name of the new DWORD.
Double-click the newly created DisableThumbnails DWORD to open its properties.
Now, set the Value data to 0 and click OK to save changes.
After making these changes, the problem with thumbnail previews not showing in Windows 10 should be gone.
11. Prevent Windows from deleting your thumbnail cache
NOTE
This solution can be potentially dangerous, so keep in mind that you’re changing these settings at your own risk.
Press Windows key + R type appdata, and click OK.
Navigate to the Local\Microsoft\Windows
Locate the Explorer directory, right-click it, and choose Properties from the menu.
Navigate to the Security tab and click on Advanced.
After Advanced Security Settings opens, click on Add button.
Now click on Select a principal.
In the Enter the object name to select field enter SYSTEM.
Click the Check Names button. If everything is in order, click on OK.
Set Type to Deny and click on Show basic permissions. Uncheck all options except Delete subfolders and files and Delete. Click OK to save changes.
Thumbnails are pretty helpful, and many users prefer using them over icons. If, for some reason, thumbnail previews aren’t showing, this guide should help you restore thumbnails in Windows 10.
A Hex editor is a must-have tool for any programmer. It is used to view and edit the raw data of computer files. Hex editors are also useful for modifying specific parts of binary files, such as device drivers or graphics resources.
In this guide, we’ll walk you through some of the best hex editors for PC that you need to know about. We’ll cover what they are and their key features and capabilities so that you can make an informed choice.
Why do I need a hex editor?
Modern computers are complex machines, and it’s not uncommon for them to have problems. If you’re having trouble with your computer, or if you just want to see what makes it tick, you might want to look at the files that make up your operating system.
These files are stored on your hard drive in binary format, and they’re not easy for humans to understand. This is where a hex editor comes in. A hex editor lets users open and edit binary files. It works by translating those binary files into text that can be read by humans.
This is important because you can use a hex editor to fix errors in your operating system or other programs. You can also use it — as long as you know what you’re doing — to change some details about how your computer operates.
Other benefits of using a hex editor include:
Viewing and editing binary files – You can view and edit binary files, such as executable files, Microsoft Office documents, PDF documents, MP3 files, and so on.
Searching specific data in a file – If you are looking for a specific string of text in a file, then it will be easier to find it using a hex editor than any other tool.
Deleting unwanted data from a file – If you want to remove unwanted data from an executable program, you can do so with a hex editor.
Modifying executable programs – You can modify an executable program by changing its code or its data with the help of a hex editor.
HxD is a popular free hex editor that is used by many IT professionals and developers. It has been around for years, so it’s definitely proven its worth.
The program has all the features you’d expect from a hex editor: searching for specific values in a file, changing data, copying data to another location, etc.
WinHex is another popular option with advanced searching capabilities and support for multiple languages. It is a powerful hexadecimal editor with many advanced features that were designed to handle any kind of binary file, in any size and in any quantity.
Easy to use, fast and flexible, WinHex is the ideal tool for Windows users who need to work with raw disk sectors, device drivers, or other binary data files.
Hex Workshop is an advanced hex editor that can edit files of any size. The program is easy to learn, but it has many powerful features that allow you to work with even large files quickly and efficiently.
The interface is very clean and easy to understand. It includes all the basic functions you would expect from a hex editor — editing and modifying data, copying and pasting, comparing files, and more. You can also create new files and folders, as well as delete them if needed.
The main feature that sets UHex apart from other hex editors is its ability to work with multiple files at once. This makes it easy to open multiple files at once, and even compare them with each other.
It makes it a great tool for developers who are working on projects that involve multiple files, as it makes it easier for them to see how changes affect different parts of a file at once.
Hackman is one of the best free hex editors for Windows. It is a very simple application that allows you to edit files in hexadecimal format.
The program has some basic features such as searching, replacing, and inserting text into a file. In addition to editing files in hexadecimal format, it also supports editing files in ASCII and Unicode formats.
UltraEdit is a powerful and flexible text, hexadecimal, HTML, and code editor. It’s not just an editor, it’s a tool to help you do your work better. UltraEdit is designed to provide the power and flexibility that experienced programmers need in a simple interface that’s easy to use.
It also includes a built-in FTP client that allows you to edit files on remote web servers without needing to use your browser or any other third-party application.
Hex Editor Neo is one of the best free hex editors for Windows, Mac and Linux. It’s a lightweight but full-featured tool that provides a great user experience.
If you are looking for an advanced hex editor that offers many options for editing binary files, this could be the right choice for you.
HexEd.it is a browser-based offline and online hex editor that allows you to edit files, copy data from one file to another and convert between binary, octal, decimal, and hexadecimal formats.
It has features like file upload, edit, and download, text search and replace, multiple undo, etc. The program allows you to edit files of any size directly in the browser without downloading anything.
Hexplorer is a free and open-source hex editor that can be used to view, edit, and convert binary files. It is written in Java and can be run on Windows.
Hexplorer provides many useful features including a binary file viewer, hexadecimal viewer, filter, and compare tools.
Cygnus Hex Editor is a freeware hex editor for Windows. It has basic features like editing, copying and pasting, printing, and saving files in different formats.
This software supports the editing of files up to 2 GB in size and allows inserting and deleting data from files. It also allows searching for and replacing specific data within the file. The software has an intuitive user interface, which makes it easy to use even by inexperienced users.
You have plenty of options if you’re looking for the best hex editor. We’ve shared information about our top picks here, and provided you with an overview for each. Hopefully, these reviews have given you a good sense of which option is likely to work best for your needs, and why.
Features are important and there’s no point in having a super fast hex editor if it doesn’t have some useful options. The top-ranked editors in our list had a pleasing combination of speed, bug-free coding, and a good range of options to edit files.
Next week’s lineup of new Xbox releases is looking pretty sweet, with a couple of big-name entries on the roster. And at least a dozen other games are headed to Xbox between November 7-11. Let’s have a look at what’s coming to Xbox.
Football Manager 2023 (PC) – November 8 (available day one with Game Pass)
So which of these games have got you excited for next week? No doubt Sonic Frontiers will be the highlight for many; for others it will be Return to Monkey Island. Or perhaps there is a sleeper hit waiting in the lineup. Anyway, let us know your thoughts on next week’s Xbox games down in the comments.
Here’s how to enable the Microsoft Teams Meeting Add-in in Outlook so you can schedule Teams meetings directly from your calendar. If the button is missing or greyed out, don’t worry, you can re-enable it manually in just a few steps.
How can I re-enable the Teams meeting add-in in Outlook?
Now, navigate to the Add-ins tab, select Disabled items under the Manage dropdown menu, and then click on Go.
If you see Teams listed here, select it and then click on Enable.
Save the changes and restart Outlook.
Press Windows + R to open Run, type regedit, and then hit Enter.
Paste the following path and hit Enter:Computer\HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook\Resiliency\DoNotDisableAddinList
Now, right-click on the empty portion, hover the cursor over new, select DWORD (32-bit Value), and name it TeamsAddin.FastConnect.
Once done, double-click on it, change the Value data to 1, and then click on OK.
Register Teams as the chat app for Office
Open Microsoft Teams.
Click on your profile pictures and select Manage Account.
Go to the General tab and check the box next to Register Teams as the chat app for Office (requires restarting Office Applications).
Restart Teams and Office.
After re-enabling the Teams add-on, you should also make sure to set it as the default chat app for Office. Doing this prevents contradictory settings from interfering with the add-in’s functionality.
That’s it! The Teams add-in would be enabled and remain that way, courtesy of the Registry changes you made here. But make sure to keep checking for updates and install it as soon as one is available.
For those who still don’t see the option, Microsoft has released a workaround to get things running. Here, you will have to make sure that the Teams plugin is added to Outlook and enabled.
Microsoft has finally released a fix for one of the many issues reported by users, and we hope others too are addressed soon. Until then, share your experience with Microsoft Teams in Outlook and whether you received an update.
A lot of Windows users often complain of high CPU usage on their devices especially if they are gamers or do a lot of work that takes a toll on their CPU and GPU. It gets worse if you have an old processor that can’t handle the workload.
That’s why Microsoft introduced the hardware accelerated GPU scheduling feature. It enables you to schedule your CPU and GPU resources by prioritizing tasks to be executed first for optimal performance.
Hardware accelerated GPU scheduling is a feature that was first introduced in Windows 10 and is also available in Windows 11. The question of whether to turn hardware accelerated GPU scheduling on or off depends on your system.
The GPU scheduler allows multiple jobs to share the GPU at once so that it can be used to its full potential. This can help performance, especially on slower systems where not all GPUs are being utilized by a single job.
This means that you need GPU scheduling if you want to get the most out of your graphics card. But what happens if you turn off GPU scheduling? Should you leave it on?
Here are some benefits of GPU scheduling:
Increased performance – A larger number of tasks can be completed at once when there are more GPUs available for processing. This increases productivity and reduces wait times for results.
Faster processing – If you have multiple GPUs on your computer system, they can each handle different parts of your workload independently and complete them faster than a single large processor would.
Reduced power consumption – A system that uses GPU scheduling can use less power because it doesn’t have to run all of its components at once.
Improved responsiveness – Because of its improved performance, users will see better responsiveness from their systems when they use them.
Reduce load on CPU servers – GPUs are often idle or underutilized when they could be put to good use. By assigning work to GPUs proactively, you can ensure that they don’t sit idle.
In general, turning on GPU scheduling is a good thing because it uses its power more efficiently. If your graphics card isn’t being used to its full potential, you won’t see any performance benefit from turning it off.
What is hardware accelerated GPU scheduling gaming?
GPU scheduling is one of the most important features of your graphics card’s driver. It’s part of the graphics pipeline, and it’s responsible for deciding what parts of the rendering pipeline to assign to each GPU core.
Hardware accelerated GPU scheduling gaming is a new approach to managing the GPU. The idea is to optimize gaming performance by using hardware scheduling, or in other words, scheduling your workload on the GPU.
Gaming on your PC or laptop is all about graphics, and the better your graphics card, the better your game will look. If you have a powerful desktop, you can get away with a mid-range graphics card.
However, if your laptop doesn’t have a dedicated GPU, it’s not going to be able to support high-end games. In fact, GPU scheduling on an old GPU can cause high latency between frames, or even stuttering during gameplay.
This happens because the scheduler may be busy with other processes, so it cannot immediately respond to requests for graphics rendering. If this happens often enough, it can cause the game to lag or freeze up completely.
Therefore, If you have an older computer with limited system resources, then we would recommend turning off the GPU scheduling and trying other ways to speed up your PC to boost performance.
However, if you have a newer computer with plenty of RAM and CPU power, then you should turn it on. This will help keep your games running smoothly without causing any issues with other applications or processes running on your system.
How can I turn on/off GPU Scheduling?
1. Use the Settings app
Hit the Windows key and select Settings.
Click on System on the left pane then Display on the right pane.
Scroll down and select Graphics.
Select the Change default graphics settings option.
Now, toggle on or off the Hardware-accelerated GPU scheduling option.
2. Use Windows Registry
Hit the Windows + R keys to open the Run window.
Type regedit in the dialog box and hit Enter.
Navigate to the following location: Computer\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers
Double click on the HwSchMode, type in 2 in the Value data to enable then press OK.
Does hardware accelerated GPU scheduling reduce FPS?
GPUs are designed to be used for graphics and video processing. However, they can also be used to speed up other types of processing as well.
With hardware accelerated GPU scheduling, a process running on the CPU will offload some of its work to the GPU instead of doing it all itself on its own processor.
This means that some of the load is moved from one processor to another, allowing both processors to do less work and therefore complete their tasks more quickly. The advantage here is that it frees up system resources (such as RAM) so that other processes can run better.
You, therefore, have nothing to worry about when it comes to your FPS drops and stuttering. The only time hardware accelerated GPU scheduling could cause stuttering and possibly affect your performance is if you have an older computer and the game is running too slow, to begin with.
Even so, the difference will be barely noticeable. Still, you can always incorporate FPS booster software if you are worried about it affecting your gameplay.
If you are looking to explore the Hardware accelerated GPU scheduling feature, you may have to upgrade your graphics card.
Having an extended monitor setup is a dream and good-to-have setup for gamers and users who are into multi-tasking. However, there are several users who have reported that their 3rd monitor is detected but not displaying in Windows 10.
If you are also among such users and are looking for effective ways to fix it, then you are at the right place. In this guide, we will give you a list of solutions that will help resolve 3rd monitor detected but not displaying in Windows 10 issue. Let us jump right into it.
Why is my 3rd monitor detected but not displaying in Windows 10?
After some research, we deduced a list of common reasons why the 3rd monitor is detected but not displayed in Windows 10 issue exists:
There is some issue with your GPU: Your graphics card settings might have been accidentally tweaked by a third-party program or by yourself.
Might be a hardware issue: Chances are that the monitor that you have connected itself has some internal issues.
The port or cable might be damaged: The HDMI port or cable you are using to connect your three monitors might be damaged.
How can I fix 3rd monitor detected but not displaying in Windows 10?
Before applying any advanced solutions, let us first go through the simple yet effective fixes that might help resolve the problem:
Try a quick restart as this could be because of a temporary glitch or bug.
Check all the connections and ensure that they are secured.
Try using the 3rd monitor solely and ensure that there is no hardware issue with it.
You can also try swapping the position of the monitors.
If the above solutions don’t help then, let us check out the advanced troubleshooting solutions.
1. Enable Extend these displays option
Press the Win + I keys to open the Settings menu.
Click on Display.
If you have connected all your monitors, select the Extend these displays option.
Click on Keep changes.
The settings applied to the selected monitor will appear in blue.
A bunch of users has reportedly fixed this 3rd monitor detected but not displaying issue in Windows 10, by enabling this option.
This is because, when you connect a monitor to Windows 10, it will display inside the Display screen, but won’t work since it is disconnected. You need to enable the option in order to use it.
2. Turn on Set up multiple displays option (For Nvidia GPU)
Plug in all of your displays.
Right-click on your desktop homescreen and select Nvidia Control Panel.
From the left, expand Display.
Click on Set up multiple displays.
Check the boxes for all three monitors connected to your PC.
Save the changes.
Restart your PC and check if this resolves the issue or not.
You need to manually select your monitors inside the Nvidia Control Panel because this issue was fixed for several users by following the above steps.
Right-click on the Start menu button and select Device Manager.
Expand the Display adapters option.
Right-click on the integrated GPU and select Disable device from the context menu.
Reconnect the third monitor and check if this resolves the issue or not.
Integrated GPU aren’t capable of handling graphics-intensive tasks such as support for multiple monitors. There are chances that your integrated GPU is by default selected because of which you aren’t able to use the dedicated GPU, hence no show of the third monitor.
Try disabling the integrated GPU and see if this resolves the 3rd monitor detected but not displaying issue in Windows 10.
4. Update the graphics driver
Right-click on the Start menu button and select Device Manager.
Expand the Display adapters option.
Right-click on the dedicated GPU and select Update driver from the context menu.
Click on Search automatically for files option.
Let the system update the drivers for you and check if this fixes the issue or not.
Chances are that because your graphics driver isn’t updated, you are facing multiple issues with the display.
You can check for driver updates by following the above method. But it will take a lot of time as you have to follow multiple steps.
There is one easy way to check and update all the drivers on your PC in just a few clicks. This can be done by using a third-party tool called Outbyte Driver Updater.
With just a few clicks you can update your drivers, fix broken drivers, find missing device drivers, perform driver backups, and more.
Outbyte Driver Updater
Prevent display issues and easily locate the latest updates for your graphics driver.
Press the Win + I buttons to open the Settings menu.
Click on Display.
Select Advanced display.
Under Choose a refresh rate, select 60Hz.
Even if your monitor supports a higher refresh rate, we would suggest you dial it down to 60Hz, because this has helped several users.
6. Install Windows updates
Open the Settings app by pressing Win + I buttons.
Click Windows update on the left.
Hit the Check for updates button.
Finally, click the Install now button to install all updates available.
7. Use specialized software for multimonitor setup
If you are still having trouble after tweaking the system settings, then we would advise you to check out our recommended software, DisplayFusion.
It is a great tool for Windows that will help you with your multi-monitor setup. It’s easy to use and helps you go through complex features very easy to transform the multiple monitor setup process into a breeze.
DisplayFusion can also be controlled with hotkeys and you can further customize it by using Power User Menu, TitleBar Buttons, etc.
This software also boasts an impressive library of wallpapers and screen savers to choose from which are best suited for a multi-monitor setup.
You don’t need to commit to it from the start. You can still test it under a free trial period.
Windows will now check for available updates. If updates are available, Windows will download them automatically in the background and install them once you restart your PC.
Windows 10 is a solid operating system, but sometimes you might find a certain bug. Microsoft is working hard to fix all Windows 10 bugs, and the simplest way to keep your PC bug free is to install Windows updates.
By default, Windows 10 automatically downloads the updates in the background, but sometimes you might skip an important update.
In case you are having issues with your second monitor, we have a guide that lists some solutions that will help you resolve second monitor not detected in Windows 10 issues.
Also, if you are having issues changing the display resolution on your monitor, then you can check out our guide and fix the issue.
Let us know in the comments below, which one of the above solutions fixed the 3rd monitor detected but not displaying problem in Windows 10.
A few years ago, in order to play Roblox on your PC, you had to download the Roblox browser. This was sluggish and limited in its capabilities.
You didn’t get access to functional tabs, it only allowed you to browse the Roblox website, and the URL bar couldn’t be edited in any way.
Fortunately, those times are long gone. In 2011, Roblox was already compatible with Google Chrome and Mozilla Firefox, but you still needed to install the Roblox browser on your PC in order to get access.
All issues ended a year later when the new release was not tied to the Roblox browser anymore.
In this article, we will try to explore what is the best browser to play Roblox on your Windows 10 PC. The results will vary, depending on the processing power of the computer you’re using.
How to choose a good browser for Roblox?
Making a choice of the browser when you have lots of options can be overwhelming even for the most passionate of us, so let’s discuss the exact principles that need to be considered when making this choice:
Speed – The speed at which you’ll be able to build your dream world in Roblox will depend on the capabilities of your device mostly, but having the right browser for the tasks you want to cover can have a huge impact on the overall experience.
Stability – As being able to run Roblox at full speed is not enough, using a browser that was created for online gaming will ensure that your world-building experience will not be cut off by any errors or pop-ups from your browser.
Privacy – Even though Roblox players are not particularly concerned about their online privacy when playing the game, having a browser that ensures that your data and information are kept safe will considerably impact the health of your system in the long run, and thus your gaming experience.
Online security – Feeling secure in the online environment is becoming a harder task by the day, so choosing a browser with all the qualities mentioned above, while also keeping your identity safe online should be one of the most important elements to consider.
The principles mentioned above were all used in order to curate the list for the best browsers to play Roblox, so make sure to check it out.
How can I play Roblox without installing it?
If you don’t want to install Roblox, you can play the game directly in your browser. No setup required, no headaches, just a couple of clicks. It’s simple and efficient and you can enjoy your game without wasting any time. Check out the best browsers for Roblox that we’ve found.
Opera GX – Best Roblox browser with amazing built-in features
Opera GX is a version of the Opera browser which was specifically designed for gamers. That’s why it ranks in the top position in our recommendations for the best Roblox browser.
Opera GX can be downloaded independently of your main browser. You can save it as the default search engine as well, and use the excellent RAM and CPU limiter features to control how much of your PC capacity you want the browser to take.
We tested all the features incorporated in the Opera GX browser to see how they will affect the gameplay, and we are absolutely stunned at how easy it is to optimize your online gaming experience with this browser.
This browser is extremely useful for everyday usage, offering a wide range of customized themes, sounds, and designs to immerse yourself completely in the gaming state of mind.
As Roblox offers you a wide range of types of servers and games, the only limit is your imagination. No matter if you’re looking to simply build a beautiful house, want to interact with people, or simply want to shoot some avatars, playing Roblox in Opera GX is a truly special experience.
Additionally, with the Discord integration, you make sure that you’re staying connected to your gaming peers. The Twitch integration is also worth mentioning since you might want to use it for further analysis of your designs.
Other notable features that will surely contribute to a positive impact while playing Roblox are the inbuilt ad-blocker, messenger tabs for various social media platforms, and separate workspaces.
Opera GX uses its powerful build-in VPN service to ensure that you can access even geo-restricted servers, or simply use a server near you to keep your privacy while not having the speed affected.
Opera GX
Try Opera GX today and benefit from all the exclusive gaming features by taking your Roblox experience to the next level.
Google Chrome – Large amount of Roblox add-ons and extensions
Google Chrome is one of the most versatile browsers you can use to play Roblox on Windows 10.
If your computer can handle the high impact on the CPU, then choosing Chrome will surely help you experience the full effect of your game.
Note: Users with low-end PCs might experience slow loading speeds and possible crashes when using Chrome to play Roblox. In this case, you might want to check out the other recommended browsers.
This extension found in the Chrome Web Store enhances the Roblox website and can modify the look, while also adding a wide range of additional features.
You can see more details about this extension, and download it to your browser, by accessing the Chrome Web Store BTRoblox download page.
This extension can also add an incredibly wide range of new features to your Roblox experience. You get access to different fixes, a website status shortcut, auto-refresh features, and also message notifications.
UR Browser – Low impact on system resources and fully customizable
The UR Browser is another option to try out when you want to play Roblox. This software option gives you the processing power and speed of Google Chrome and Firefox’s low system impact.
This software is perfectly optimized to adapt to any system configuration and offers an extensive range of customization options.
Besides all these features, UR Browser also offers you unparalleled security and privacy online while giving you quick access to any of its features.
The speed, privacy, processing power, versatility, and customization power found in this software make UR Browser one of the best software to play Roblox online.
This browser is an extremely resourceful tool for a private online experience and it has lots of integrated features to improve your game performance.
With this completely private browser, you’re covered against tracking websites and ads that store your personal data. This way, you get x2 faster navigation online and enjoy your content.
Your security is also increased with the help of an integrated VPN and firewall that encrypts your connection and secures any digital behaviors.
The built-in VPN can secure your network not only on your browser but on other devices like mobiles or on the full system.
In addition, you have a very helpful feature called Brave Talk and it offers a confidential video call platform to hang out with your friends while you’re playing Roblox.
There is no need for other applications or extensions to take the call and it’s fully protected from third-party invasive trackers.
Vivaldi Browser – Amazing interface with customizable elements
Vivaldi is a privacy-friendly option that can provide you with lots of practical features and support to play your Roblox browser games.
This browser puts privacy first and comes with an ad-blocker tool, plus tracking protection from different websites.
You can use effective browsing tools designed to streamline your experience. Thus, you have tab master tools like split-screen tabs, grouping, or favorite tabs in the sidebar.
With the extensions support, it’s possible to enhance your browser with Chrome extensions or other efficient ones.
Moreover, you can enjoy mouse gestures or keyboard shortcuts for your gaming activities and easily access your fun content online.
Mozilla Firefox – A wide range of Roblox add-ons and options
Mozilla Firefox is another great option if you want to play Roblox on your Windows 10 operating system and own a medium-range PC.
The extensions in the Firefox online store are also extensive, covering many topics – wallpapers, fixes, etc.
The wide range of features found in Chrome cannot be compared with the ones found in Firefox, but what this browser lacks in extension variation, it makes up for in the speed department.
If you have a low-end or medium-end PC, Mozilla Firefox is your best bet.
Microsoft Edge has many advanced features and functionalities that can be useful for regular users or gamers.
This browser is the right choice for productivity and an organized homepage so that you can get done all your duties and save time for relaxation.
You also have anti-tracking security tools that block persistent ads using your personal information for useless promotions.
Moreover, this browser will protect you from digital threats like malware or phishing attacks. According to the test by CyberRatings.org, malware protection is even higher than Chrome protection.
There are also privacy instruments such as passwords manager, data breach protection, easier online shopping, and multi-level tracking privacy.
Even though it’s not a gaming dedicated browser, you can surely benefit from features that support your online gaming experience.
It was officially announced in 2012 that Roblox games could be played directly on the browser. In addition, you can run multiple games on different browsers like Opera, Firefox, or Google Chrome.
Using a mobile cloud to start Roblox games on your current browser would be best. You can thus use Now.gg to install the game in the browser immediately.
You only have to login into the browser and choose your gameplay with other millions of users worldwide.
However, it is also possible to install Roblox on the PC and launch it anytime you feel like it.
So, in this article, we explored the best browser options to use when playing Roblox on your Windows 10 PC.
All of the options listed above are good. However, it all depends on the capacity of your PC.
Also, it would be best to decide whether you want a dedicated browser with exclusive features, such as Opera GX, or a more general one, like the others.
Please share your opinion about this topic using the comments section below.
Corrupted system32 is a serious problem and it will prevent your PC from booting, but you might be able to fix it with steps from this guide.
What is Windows System32 error?
This error message appears if there’s a problem with your System32 directory. There are several causes for this issue:
File corruption – If your System32 directory is corrupted, you Windows installation won’t work at all and you won’t be able to access Windows at all. This can lead to Windows System32 config system error 0xc00000e9 and many others.
Registry corruption – System folder hold necessary Windows information, and if it gets corrupted, you won’t be able to boot at all.
How do I fix Windows system32 config system is missing or corrupt?
Before we start fixing this issue, we advise you to perform several preliminary tasks:
Back up files from the C drive – To fix this error you might have to reinstall your operating system, so be sure to back up all your important files. You might have to connect your hard drive on a different PC in order to do that.
Use Linux Live USB– Create a Linux Live USB on another PC and use it to back up your files. Few users reported that booting from Linux USB fixed the problem, so you might want to try that.
Create Windows 10 installation media – Find a working computer and create a bootable Windows 10 installation media. You’ll need it to complete steps from this guide.
1. Scan for HDD errors
Connect your USB flash drive to the PC.
Press the F4 key to select a boot device. The key might be different on your PC and it’s usually displayed during the boot.
Select your USB flash drive.
Windows installation will now start. Select Repair your computer.
Now select Troubleshoot. Next, go to Advanced options.
Lastly, pick Command Prompt.
Type the following command and press Enter: chkdsk /r C:
Wait for the scan to finish.
After the scan is finished, check if the problem is resolved.
Plug-inUSBor insertDVDwith the Windows 10 installation.
Restart your PC and enter the boot menu. Choose to boot from the installation media.
Wait until the installation files load and chooseInstall now.
Select preferred settings and choose theCustom install.
Select your C partition and click Next. Keep in mind that partitions aren’t labeled, so make sure you correctly determine the right partition.
If there’s not enough space on the partition, you’ll have to format it before you can proceed.
Follow the instructions on the screen to complete the process.
Once the process is done, you’ll have a fresh installation of Windows and the issue should be resolved. If you want to fix windows/system32/config/system without CD, then this is the way to go.
Fixing Windows system32 config system on Windows 10 is a complicated process, and it usually requires you to create installation media in order to repair or restore your system.
This isn’t the only error, but we tackled errors such as Windows cannot find windir system32 in a separate guide. Did you fixed this problem with a different solution? Share it with us in the comments below.
![LUA Error in WoW: What is & How to Stop it [3 Quick Ways]](https://windowsreport.com/wp-content/uploads/2020/07/lua-error-wow.jpg)
![How to Record Screen with Audio in Windows 10 [Quickest Way]](https://windowsreport.com/wp-content/uploads/2021/07/xbox-game-bar-1.jpg)
![How Do I Use Aiseesoft Screen Recorder with Audio? [Easy Way]](https://windowsreport.com/wp-content/uploads/2021/11/record-your-desktop-using-Aiseesoft-Screen-Recorder.jpg)
![Your Device Ran Into a Problem And Needs to Restart [Fix]](https://windowsreport.com/wp-content/uploads/2022/02/Your-PC-ran-into-a-problem-and-needs-to-restart-2.jpg)
![Download & Install Avast Driver Updater [Free trial]](https://windowsreport.com/wp-content/uploads/2022/11/Untitled-design-84.jpg)
![Best Hex Editor For Windows 10 & 11 [Online Picks Included]](https://windowsreport.com/wp-content/uploads/2022/11/Hex-editor.jpg)
