We install many apps on Windows, and each of these gets updated every few months. Here, the OS stores the change in system information in a file to aid recovery in the Windows Installer folder, which might need a cleanup.
The OS stores these files to ensure that you can revert the changes. But, as many reported, the Windows Installation Folder takes up a lot of space, close to 30-50 GB for some users, and cleanup becomes imperative.
Can I clean up the Windows Installer folder?
The files are stored whenever an application is installed using the Windows Installer, and their size is usually small. But, over the course of time, as more apps are added and updated, the size of the Windows Installed folder increases.
Where exactly are Windows Installer files used? They come in handy when uninstalling an application or an update for it. Though experts recommend against deleting the files stored in the Windows Installer folder, if you run out of storage, try it.
Keep in mind that it’s safe to delete only the baseline cache:C:\Windows\Installer\$PatchCache$
Don’t remove anything that’s located directly under:C:\Windows\Installer
This way, you can free up some space from your hard drive (especially if the space is already limited). Over time these patches might become quite numerous.
Remember, these are system files that are hidden by default, so you will have to directly paste the path in the address bar to access it. Another way is to enable hidden system files in Windows.
How can I cleanup the Windows Installer Folder?
1. Manually delete Windows Installer Patch files
Press Windows + R to open Run, paste the following path, and hit Enter:C:\Windows\Installer\$PatchCache$
Press Ctrl + A to select all the files here and hit Del.
Choose the appropriate response if a confirmation prompt appears.
If required, empty the Recycle Bin as well, though we recommend waiting for a few days in case an issue pops up.
The manual way for Windows Installer Folder cleanup works well, but you will have to first make the hidden protected operating system files visible.
Now, follow the on-screen instructions to complete the installation process.
Next, launch PatchCleaner, and it will identify the files (orphaned ones) to be removed.
Click on Delete to proceed.
PatchCleaner is the preferred tool for many when it comes to Windows Installer Folder cleanup. The best part, it automatically identifies which files can be safely removed and clears disk storage without putting the PC at risk, though it may sometimes be inaccurate.
Some software helps where it counts the most, in the performance of any PC, with optimization utilities that prevent a lot of unwanted damage from a system failure.
These specialized repair tools examine and diagnose your damaged PC before repairing it using technology that not only restores your Windows Operating System but also reverses the damage done
While Google Docs remains a super powerful real-time document authoring and collaboration software, it occasionally has issues. One of the most common is Google Docs not printing anything.
The problem can arise for several reasons, and you will have to either identify the underlying cause and execute the relevant fix or try them all. Surprisingly, the latter turns out to be quicker. So, let’s find out all about the problem.
Why is my Google Docs not printing?
Here are a few reasons Google Docs is not printing:
Outdated printer driver – In some cases, users reported incompatible or outdated drivers because Google Docs is not printing clearly.
Problematic browser extensions – Some browser extensions can, too, conflict with the printing process. Remember, it’s not just the new ones; even an extension working fine until now could trigger the issue.
Corrupt browser cache – A corrupt browser cache can often lead to Google Docs not printing text, and clearing it should do the trick. This is also the reason behind Error 150 in Google Slides.
How can I fix Google Docs if it’s not printing?
Before heading to the slightly complex solutions, here are a few quick ones to try:
When Google Sheets or Docs is not printing images, check whether you are using a compatible browser, i.e., either Chrome or Safari. For example, when you try to print Google Docs in Firefox, it saves the file instead.
Restart the computer and the printer, and verify if the problem is resolved.
Ensure you are using the latest version of the browser since a bug in Chrome reportedly caused the issue, and a patch for it was released. In case you use another browser, update it as well.
If these don’t work, the ones listed next should.
NOTE
The steps listed here are for Google Chrome but also work as fixes on other browsers. If you want to learn the exact steps for another browser, head to its official website.
1. Disable extensions
Launch Chrome, paste the following path in the address bar, and then hit Enter:chrome://extensions/
Now, disable the toggle for individual extensions one at a time, restart the browser after each, and check whether the problem is resolved.
As soon as it is, click on Remove under the extension disabled last.
Again, click Remove in the confirmation prompt.
Several users reported that Google Docs was not printing a full page with the Awesome Print Extension installed. Some also reported issues with the Grammarly extension, so look out for these two, along with the others.
2. Clear browser cache
Launch Chrome, and press Ctrl + Shift + Del to open the Clear browsing data window.
Select All time from the Time range dropdown menu, tick all three checkboxes, and then click on Clear data.
Once done, relaunch the browser for the changes to appear and verify if the issue is resolved.
3. Update the printer driver
Press Windows + R to open Run, type devmgmt.msc in the text field, and hit Enter.
Now, expand the Printers section, right-click on the problematic printer, and select Update driver.
Next, select Search automatically for drivers and wait for Windows to install the best one.
Drivers are critical for the effective functioning of connected hardware, and if these are outdated, corrupt, or incompatible, updating the driver should do the trick.
You can also consider third-party solutions to install drivers safely and have the latest version of each driver installed. Therefore proceed and install your drivers with Outbyte Driver Updater.
Outbyte Driver Updater
Keep your computer safe and get the latest updates for your drivers with Outbyte Driver Updater.
Every browser has an Incognito or Private browsing mode, wherein the installed extensions, site cookies, and other similar aspects don’t work. And if these are causing the trouble, switching to the mode might work.
Incognito Mode in Chrome
For Google Chrome, hit Ctrl + Shift + N to open an Incognito window. The same shortcut works on Microsoft Edge as well. If Google Docs is still not printing in color, head to the last solution.
5. Download the document and then print it
In Google Docs, click on the File menu, hover the cursor over Download, and choose PDF Document (.pdf) from the list of options.
Once downloaded, open the document in a PDF viewer, and print it from here.
Remember that this should only be used as a last resort if the other solutions don’t fix things when Google Docs is printing blank pages or not printing at all. Also, we recommend you keep looking for browser updates.
Besides, if you are considering switching browsers for a better experience, check the best browsers for Windows.
If you have questions or fixed things with a solution not listed here, drop them in the comments section below.
Subnautica is a great game but some users reported issues with the game, and the most common issue with the game is crashing.
In today’s guide we’re going to show you how to fix Subnautica crashes on your PC, so let’s get started.
Why does Subnautica keeps crashing?
One of the most common reasons for Subnautica crashing is a large save folder which can lead to crashes or freezing issues. Other reasons include outdated graphics card or PC that does not meet game requirements.
How can I fix Subnautica crashes and freezes?
1. Update your graphics card drivers
If Subnautica crashes on startup, you should update your graphics card drivers. You can do that manually from the manufacturer’s website, but the process is faster and simpler if you use a specialized tool for that.
Outbyte Driver Updater will scan your system and let you know which drivers are out of date. The software will update your graphics card as well as other outdated drivers automatically with almost no input required.
Once you get a list of outdated drivers, you just need to select the ones that you want to update and click the button to download and install them automatically.
The software is fast and simple to use, and with a database that has more than 18 million driverfiles, you should be able to update your drivers in a matter of moments.
Other great features:
Fast scanning
Over 18 million driver files in the database
Download manager for drivers
Driver backup
Scheduled updates
Outbyte Driver Updater
Outbyte Driver Updater a simple to use driver updater software that can fix all your driver-related issues automatically.
Navigate to the game folder. By default it should be: SteamLibrarySteamAppscommonSubnautica
Locate the SNAppData directory and copy it to a safe location.
Navigate to your save folder. The location should be the following: SNAppDataSavedGamesslot0000
Now delete or rename the following folders: CellsCache and CompiledOctreesCache folders. They should be below the slot0000 folder.
This is a simple workaround, and it should help you if Subnautica keeps crashing. Few users reported that they had to reinstall their game as well, so you might try that if deleting the files doesn’t work.
Fixing Subnautica crashes and freezes is pretty simple, and in most cases, you just need to update your graphics card drivers or clear the cache files.
Windows 7 users might experience some issues regarding File Explorer frequently crashing.
In most cases, the program stays open for 10 or 20 minutes and after this, it closes on its own. Often times it will display an error message and disable your taskbar in the process.
There are several possibilities as to why your File Explorer is crashing in Windows 7.
For example, you installed a recent update for your Windows operating system. If the update has incompatibility issues with your system, then it will cause your File Explorer to crash.
So here are s few easy steps to follow in order to fix your system and prevent this from ever happening again.
In some cases, it is a virus that closes the File Explorer automatically. So you should scan your system using your antivirus. If you’re not using such a tool, we recommend TotalAV.
This reliable antivirus gives you multilayered protection against malware, ransomware, or spyware attacks that can infect your PC.
More so, it also comes with a lot of useful features that protect your privacy like downloading files scanning, machine learning in the cloud and locally, small system footprint, gamer mode, and much more.
Reboot your PC after the scan and try running File Explorer again to check if you have the same issue.
2. Relaunch File Explorer
Press and hold simultaneously Ctrl+Alt+Delete and open Task manager.
Click on the File menu.
Click onRun new task.
In the box you have in the newly opened window, you need to type explorer.exe.
Click OK.
For a quicker way, you can simply right-click on File Explorer and choose Restart.
3. Check your Registry
The third option is to verify your Registry for any errors. You may use a registry repair tool because you will get your system clean and optimized with just a few clicks.
Just download and install the tool of your choice using the button above, open it, find the Registry tab, and start the repair process. The tool will do the rest and all registry errors should be fixed.
4. Close incompatible apps
You might have some apps installed that are not compatible with your operating system.
In this case, you need to open the Task Manager again, as mentioned above, and close the apps that are not compatible.
Afterward, try running File Explorer again.
5. Find compatible drivers
If you updated some drivers lately, try disabling the respective apps or hardware. Run the File Explorer to see if it crashes.
If it doesn’t, then you need to find compatible drivers for your apps or pieces of hardware. The best solution is to simply download your drivers from your hardware manufacturer’s site.
6. Disable installed extensions
If you have any extensions installed such as Google Drive, DropBox, try to disable them and see if Explorer still crashes.
If it doesn’t, you can either update the extensions or disable them permanently. Faulty or incompatible extensions may interfere with your Windows operating system thus preventing you from using it correctly.
7. Run SFC
Open Command Prompt from the Start menu
Type sfc /scannow
After you type the command, press Enter.
Wait for the scan to complete and check if you have the same issues with file explorer
8. Refresh your PC
If you still didn’t fix your File Explorer issue with the solutions presented above, you need to use the Refresh your PC feature.
Before we start this process, back up all your personal data on a USB flash drive or external hard drive to prevent important information loss.
This feature will take your system settings back to default fixing any errors that might have appeared in the past.
From the PC Settings feature you have in your Charms bar/ Windows logo, choose to Refresh my PC. For this, you need to insert a Windows disk to copy files back to your system.
So after using the options above, you should be able to fix your file explorer and prevent it from ever crashing again.
If you’re experiencing the same issue in Windows 10, here is a guide on how to fix File Explorer crashes on the latest OS version.
Also if you have any new ideas on this subject or troubleshooting solution suggestions, let us know in the comments below.
The Quick Access Toolbar in Microsoft Excel brings the frequently used features to your fingertips. So, it is crucial to know how to customize the Quick Access Toolbar in Excel to create a more suitable user interface.
Can I customize the Quick Access Toolbar and the ribbon in Excel?
One beautiful thing about Microsoft Office is that users can import and export customized Quick Access Toolbar from one app to another. It helps you customize the apps.
Because Excel is highly customizable, there are a couple of options to use in its toolbar, to your preference. It allows you to hide and restore the Quick Access Toolbar when working. Also, you can change the order of the commands.
Furthermore, customizing your Excel Quick Access Toolbar allows you to add or remove commands from. There are other customization options you can use, and we’ll take you through some as we go into the guide.
How do I customize the Quick Access Toolbar in Excel?
Right-click on the Ribbon, then select either Hide Quick Access Toolbar, or Show Quick Access Toolbar.
It allows you to call for the Quick Access Toolbar when needed and not just lie around your workspace. So, you can retrieve it if it’s hidden or hidden if it’s available.
2. Change the Quick Access Toolbar location
Open Excel on your device.
Click the drop-down button in the top-left corner, then select Customize Quick Access Toolbar.
Select Show Below the Ribbon from the drop-down menu.
You can do the same to move it above the ribbon if the Quick Access Toolbar is below the ribbon.
Changing the location of the Excel Quick Access Toolbar lets you select where it is best suited for your activities.
3. Show or Hide command labels on the Quick Access Toolbar
Launch Excel on your device.
Click on the drop-down button, and click Customize Quick Access Toolbar.
Select either Show Command Labels or Hide Command Labels from the drop-down menu.
The condition for this customization process is that the Quick Access Toolbar must be set below the ribbon to show or hide the command labels.
Thunderbird is one of the best desktop email clients on Windows 10 thanks to its ease of use and efficiency. However, users have been complaining that Thunderbird is not responding on their PCs for some reason.
This can be annoying, as it renders the email client completely useless. Fortunately, it is not the most challenging issue, as it only requires a tweak or two.
Why does my Thunderbird keep freezing?
Problems with third-party apps can sometimes cause this issue to appear.
Antivirus interference can sometimes prevent Thunderbird from working properly
Tip
Before starting any troubleshooting steps on Thunderbird, you should avoid this problem altogether and try another email client. The solution recommended below is famous thanks to its clean and friendly interface and, more importantly, its error-free.
Below are some of the troubleshooting steps you should try before applying any of the fixes in this guide:
Restart your PC.
Make an exception for Thunderbird in your antivirus software.
1. Run Thunderbird from Safe Mode
Press the Windows key + I to open the Settings app and select the Update & Security option.
Choose the Recovery option in the left pane and click Restart now under Advanced startup.
When your PC restarts, choose to Troubleshoot > Advanced options.
Now, select the Startup Settings option.
Click the Restart button.
Finally, press the 5 or F5 to Enable Safe Mode with Networking.
If Thunderbird is not responding, it might be because of some apps or processes. Restarting your PC in Safe Mode will only enable the needed drivers and services to run your device.
If Thunderbird works in Safe Mode, then the problem is most likely caused by a third-party app.
2. Disable antivirus
Press the Windows key, type virus, and select Virus & threat protection.
Choose the Manage settings option.
Now, toggle the switch for Real-time protection backward to disable it.
In some cases, Thunderbird might not be responding because your antivirus is blocking it. The quick fix to this is to disable your antivirus temporarily.
The steps above only show how to disable Windows Defender. If you have any third-party antiviruses, you should disable them too.
NOTE
Disabling antivirus can put your system at risk since malware can spread via email, so use this solution only for troubleshooting purposes.
3. Uninstall third-party antivirus
Press the Windows key + I and select the Apps option.
Select your antivirus software and click the Uninstall button.
Finally, follow the onscreen instructions to complete the removal.
If disabling your antivirus does not fix the Thunderbird not responding issue, you might need to remove the software altogether. This is especially the case for AVG, as users have confirmed that it does not work well with Thunderbird.
That is all there is to fix the Thunderbird not working with Gmail, not responding, and other variations of the issue. All you need to do now is follow the instructions carefully, and things should return to normal.
Valheim is a very engaging survival game with great gameplay and mechanics. However, many users complain about Valheim crashing on startup and during the loading screen.
Here’s how a user expressing his disappointment on Reddit:
Hello, every time I start up valheim my game crashes when I try to join a new world and it says “valheim.exe has stopped working”.
Has anyone else had issues with this? I cannot find much because the game in brand new. i also don’t want to refund because it genuinely looks amazing but I cannot play it
This crashing error in Valheim can be pretty annoying, especially if you’re anticipating a great gaming session.
That is only one example of Valheim crashing on start and there is no official fix, but we have a couple of solutions that will solve the problem.
How can I fix the Valheim crashing on PC?
1. Run the game as an administrator
If the game is not starting at all, the main problem could be the lack of administrative rights.
So, first of all, make sure that you have full rights on your Windows 10 account that you’re using.
Another very common problem for such crushes is the antivirus that might be blocking your game because it sees it like a threat.
An obvious solution for this problem is to check the antivirus settings and allow Valheim to run without restrictions.
Another quick solution is to disable your antivirus temporarily. If the issue is caused by your antivirus, consider changing it with a better antivirus that doesn’t interfere with your important apps.
3. Launch the game in windowed mode
Launch Steam.
Locate Valheim in the library of games.
Right-click the game and select Properties.
Go to the General tab and click on Set launch options.
Type -windowed -noborder in the field.
Click the OK button and exit.
If Valheim keeps crashing, this might be caused by the fact that the resolution of the game doesn’t match the supported resolution of the screen.
This solution should start your game in a windowed mode and should bypass any problems with the resolution of the screen.
Of course, if that is the issue and the game is running fine, tweak the resolution on the game to match your monitor.
Despite all inherent problems, Valheim is still an awesome survival game for PC so check the link below to get it right now.
Valheim
Play Valheim to teleport into a fantasy survival game that will keep your thrills high all the time.
Users reported that File Explorer crashes when searching, which can be a big problem, especially if you use this feature frequently.
If you don’t fix the problem, you won’t be able to perform searches on your PC, which can negatively impact your workflow, so in today’s guide, we will show you how we can fix this problem.
What causes File Explorer to crash when searching?
File path length can sometimes cause problems with File Explorer since Windows doesn’t work well with long paths.
Improperly configured registry will cause crashes and registry problems.
In some rare instances, file corruption can lead to this problem.
How do I fix search crashes in Windows 10?
Before we start, checking the length of the file path you’re searching is advised. Windows has a limitation of 256 characters for paths, so you might want to try renaming specific folders or moving your files to a different directory as a workaround.
1. Delete registry keys
Press the Windows + R, type regedit, and press OK.
In the prompt asking for permission, don’t hesitate to click Yes.
Go to: HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell
Expand Shell and delete BagMRU and Bags by right-clicking the folders and choosing Delete.
Finally, you need to restart your computer and confirm that File Explorer no longer crashes.
2. Disable cloud storage extensions
Use the keyboard shortcut Windows key + R to launch the Run window on your computer.
On the Run box, type regedit and click OK.
From left panel of Registry Editor go to HKEY_CLASSES_ROOT\CLSID\{8E74D236-7F35-4720-B138-1FED0B85EA75}\ShellFolder
Right-click on the ShellFolder key, and choose Permissions.
Tap on the Owner and select Change. You should be the owner, so type in your username and confirm.
Under your username, check to Replace owner on sub containers and objects.
Furthermore, from the bottom of the same window check Replace all child object permissions with inheritable permissions from this subject, then click OK.
Select your username on the list, and check the Full Control box in the Allow column.
From the right pane of Registry Editor, click on the Attributeskey and set the value to 0.
Save your changes and reboot your Windows 10 device.
Press the Windows key + R key, which opens the Run dialog box.
On the Run box, type cmd and click OK.
Run the following command: sfc /scannow
Wait while the System File Checker is repairing your computer.
When it completes the procedure, restart your PC. Check if the issue is resolved at the next system startup.
How can I improve Windows search performance?
Make sure that the necessary files and folders are correctly indexed. Exclude folders that you don’t use.
If necessary, rebuild the search index to improve performance.
Limit your searches to specific folders to speed up the search process.
Use SSDs, if possible, since they offer far better performance.
We hope these solutions helped you fix the problem with File Explorer crashes when searching. In most cases, the issue is caused by bad registry values or file paths that are too long to handle correctly.
The Blue Screen of Death error is the widespread issue that users dread facing on Windows PC. However, many users are not experiencing an unpleasant black screen without a cursor on Windows 10.
This makes your PC useless at the time, with no troubleshooting direction. Thankfully, this issue has some solutions, as shown in this guide.
What causes a black screen without a cursor on Windows 10?
Below are some of the causes of the Windows 10 black screen without cursor issue:
Faulty display drivers: If you get a black screen without a cursor on Windows 10 before login, it is likely due to your graphic card drivers. The solution is to uninstall the drivers manually or use specialized software and reinstall them in Safe Mode.
Corrupt boot files: If you are getting the Windows 10 black screen without a cursor on startup, it might be due to issues with your boot files. You need to repair these files by running some commands or using a dedicated boot repair tool.
How can I fix the black screen without cursor on Windows 10?
Below are some of the troubleshooting steps you should perform before making changes to your PC in a bid to fix this issue:
Restart your system
Press the sleep button and resume Windows
Test your PC with a monitor
If these do not show any positive signs, you can delve into the fixes below:
1. Uninstall display drivers in Safe Mode
1.1. Enable Safe Mode
Restart your PC multiple times to enter the Windows Recovery Environment.
Select Troubleshoot > Advanced options.
Now, choose Startup Settings.
Next, click the Restart button.
Press 5 or F5 to Enable Safe Mode with Networking when your PC restarts.
The first step towards fixing the Windows 10 black screen without a cursor issue is to go into Safe Mode with Networking. This will start your PC with only the needed drivers and components.
1.2. Uninstall display and monitor drivers
Press the Windows key + R, type services.msc, and click OK.
Double-click the Windows Update service to open its properties.
Now, set its Startup type to Disabled and click the Stop button.
Click the Apply button followed by OK and close the Services window.
From here, press the Windows key + X and select the Device Manager option.
Next, expand the Monitors section, and right-click the Generic PnP Monitor option.
Now, select the Uninstall device option.
Click the Uninstall button.
Double-click the Display adapters option to expand it, and right-click each device.
Select the Uninstall device option.
Check the box for Delete the software for this device and click the Uninstall button.
Finally, restart your PC.
If you started noticing the Windows 10 black screen without a cursor after updating your drivers, it might be due to incompatible or faulty drivers. The solution is to remove the display and monitor drivers in Safe Mode.
Note that you need to disable the Windows update before uninstalling the drivers. Else, the drivers will be reinstalled automatically, causing a repeat of the issue.
2. Perform a Startup Repair
Restart your PC multiple times to enter the Windows Recovery Environment.
Select Troubleshoot > Advancedoptions.
Now, choose the Startup Repair option.
Finally, follow the onscreen instructions to complete the process.
If you are experiencing the Windows 10 black screen on startup with no cursor and you can enter the recovery environment, performing a Startup repair is your best bet.
Create a media installation tool on another PC and insert it into yours.
Boot your PC from the media tool and click Repair your computer on the Install Windows page.
Now, select Choose an option in WinRE.
From here, choose Troubleshoot > Advanced options.
Finally, select the Automatic Repair option and follow the onscreen instructions to complete the process.
You need to use a media creation tool to troubleshoot if you cannot enter the Windows Recovery Environment due to the black screen without a cursor on Windows 10. The first thing to do is to use the Automatic Repair tool to fix any failing components on your PC.
3.2. Repair system files
Repeat Steps 1 to 4 in Solution 3.1.
Select the Command Prompt option.
Now, type the command below and hit Enter: Bootrec /RebuildBcd
Sometimes, the Windows 10 black screen without a cursor can be caused by a corrupt boot file. The solution is to repair the boot files using a media installation tool.
3.3. Perform a system restore
Repeat Steps 1-4 in Solution 3.1.
Select the System Restore option.
Finally, follow the onscreen instructions to complete the process.
Finally, if the above steps cannot fix this issue, you must perform a system restore. This will help return the system to a time when it worked perfectly.
There you have everything you need to fix the Windows 10 black screen without a cursor issue. However, if the steps above do not work, you might need to reinstall Windows 10 or see a technician, as it might be a motherboard issue.
Feel free to let us know the solution that helped you fix this issue in the comments below.
Facing Dell dock Ethernet network problems? Whether it’s the WD19S, WD19TBS, or a Thunderbolt dock, many users report that the Ethernet adapter is not working. This guide shows how to fix Dell docking station network issues in minutes.
How can I fix the Dell Docking Station Ethernet not working?
Type devmgmt.msc and click OK to open the Device Manager.
Expand the Network adapters section in the Device Manager.
Right-click on the current network adapter and select Properties.
In the Properties window, open the Advanced tab.
Under Property, select Energy Efficient Ethernet.
Click the drop-down menu under Value and select Disabled / Off.
Click OK to save the changes.
Close the Device Manager and restart the computer.
Connect the dock to your PC and check for improvements.
3. Don’t close the lid fully
If you happen to fully close the laptop lid after docking the laptop, try to keep it partially open. This might solve the Dell Docking Station Ethernet not working issue.
Several users have reported that not closing the laptop lid after docking the laptop has resolved the issue as they are able to use the Ethernet though Dell dock.
If possible, leave the laptop screen fully open. If not, close it to the point where it can hold itself without collapsing. Modern laptops come with solid hinges that can hold the lid at any angle.
4. Check the USB ports
Dock stations have ample USB ports. However, if you have a device that has occupied the USB port just below or beside the Ethernet port, try vacating the USB port.
As strange as it may sound, vacating the USB port near the Ethernet port has helped several users fix the issue with their docking stations.
If you can’t afford to keep a USB port empty, simply try to swap the USB device with another USB device that is using some other port on the dock and check if that helps.
5. Check the Network Address
Press Windows key + R to open Run.
Type devmgmt.msc and click OK to open the Device Manager.
In the Device Manager, expand the Network adapter section.
Right-click on your currently active network and select Properties.
In the Properties window, open the Advanced tab.
Select Network address under the Property section.
If the Network address is set to Not Present, select the upper empty option under Value.
Enter the MAC address and click OK to save the changes.
Close the Device Manager and check for any improvements.
If the Ethernet is not working through the Dell dock, it can be due to several reasons including power output issues as well as network address misconfiguration. Follow the steps in this article to fix the problem.
We hope you managed to solve the Dell Docking Station Ethernet not working issue with our guide.
Don’t forget to leave any other questions or suggestions that you may have in the comments section below.
FAQs
Why does my Dell dock have no Ethernet connection?
It could be a driver or firmware issue. Update the dock drivers and check BIOS network settings.
Is Dell Thunderbolt dock Ethernet driver different?
Yes. Thunderbolt docks may require additional drivers and secure BIOS authorization.
Can I use Wi-Fi and Ethernet at the same time?
Yes, but it requires manual configuration and may not offer faster speeds unless balanced correctly.
Orange is one of the biggest telecommunication providers in the world. But in the past few years, it’s been cracking down on IPTV use.
You can unblock your favorite streaming service and regain your privacy with several workarounds.
Below, you can find detailed instructions. Let’s get to work!
How to unblock IPTV on Orange?
French ISPs are legally obligated to restrict access to unverified streaming services. That includes the following domains:
iptv-teli.com
king365-tv.com, king365-tv.cf, king365tv.com
ddnc.us
platineiptv.pro
premium-itv.com
primeplus.tv
xtream.ws
tvservice.pro
Orange, Free, BT, and Bouygues have been vehement in preventing access to similar sites and subdomains.
Additionally, IPTV allows you to watch foreign TV content whenever you want — which doesn’t comply with broadcasting rights. One of the most popular instances is live sports streaming.
Orange, as your ISP, can track your online activities, block websites, and even limit your bandwidth.
So, what can you do when Orange blocks your IPTV? Here are some suggestions.
1. Use a VPN
A dependable VPN will give you the best results in evading content restrictions. For this, we recommend ExpressVPN.
It’s one of the few services that can unblock even the trickiest streaming platforms.
1. Type Control Panel in the Windows search barand click on it.
2. Find Network and Sharing Center.
3. Select Change adapter settings on the left side of the screen.
4. Right-click the connection you want to alter and choose Properties.
5. Click on Internet Protocol Version 4 (TCIP/IPv4), then Properties.
6. In the new pop-up, select Use the following DNS server addresses. Type in the new addresses and click OK.
You can try these:
1.1.1.1 and 1.0.0.1 (Cloudflare)
8.8.8.8 and 8.8.4.4 (Google)
9.9.9.9 and 149.112.112.112 (Quad9)
76.76.2.0 and 76.76.10.0 (Control D).
7. Repeat the process for Internet Protocol Version 6 (TCIP/IPv6).
Why does this method work?
Usually, every time you visit a website, your DNS requests go to your ISP. It can then use that info to monitor you.
Luckily, you’re safe if you change to other DNS servers that won’t record the sites you’re visiting.
We recommend Cloudflare for privacy. It will never log your IP address or sell your data.
3. Use Smart DNS
Alternatively, you can use a Smart DNS service to continue streaming IPTV.
It reroutes your DNS queries to a server in another country. That way, you can gain access to content that’s otherwise unavailable.
It won’t provide advanced protection as a VPN would, though. On the brighter side, you can expect a speedier Internet connection.
Keep in mind that you can’t use both services at the same time as their protocols interfere with each other.
4. Use a proxy
Proxy servers will achieve similar results when Orange blocks your IPTV.
They send your traffic through remote servers so your location can’t be pinned down. Thanks to that sneaky mechanic, you can unblock the content you want to stream.
However, proxies work on the application level. That means they’ll only reroute the traffic from the app you’ve set them up with.
Additionally, they won’t encrypt your data — but that’s why they’re faster than VPNs.
Overall, it’s a good and free option to go around a block on your IPTV.
How to install a VPN on an IPTV box?
There’s a wide variety of devices that stream IPTV nowadays. However, there are subtle differences between them when it comes to running VPNs.
Chromecast, Android TV, and Amazon Firestick let you download VPNs directly via the Play Store or Amazon App Store. You’ll have to use your streaming device’s interface to connect to the VPN.
Meanwhile, Roku and Apple TVdon’t allow you to directly install a VPN on them. You’ll have to do it the roundabout way — on your router.
You can use a physical or virtual router.
With a physical one, you’ll need to ensure it has firmware supporting VPN connections. You can also get a pre-configured VPN router.
Alternatively, you can use your laptop (connected to a VPN) as a virtual router to broadcast a Wi-Fi hotspot to your IPTV box.
Why do IPTV providers block VPNs?
If, when trying to stream your IPTV, you get a black screen or an error message, then your VPN has been blocked.
Major IPTV providers have sophisticated security systems that detect VPN users and associated IP addresses. Free VPN services can’t stand a chance against them.
The reason lies in copyright laws.
In order to comply with copyright agreements, legal and verified streaming platforms have to restrict their viewership to certain regions. Sadly, licensing isn’t global — it’s territorial.
You can’t access any program that doesn’t have content licensing in your country.
IPTV providers block VPN services, as they allow you to bypass these restrictions.
Illegal platforms, on the other hand, provide you with pirated content that violates these agreements. They also won’t prevent you from using a VPN.
Wrap up
So, now you know what to do the next time you suspect Orange blocks your IPTV service.
In a nutshell, a VPN is the best solution because it prioritizes your privacy.
Proxies, Smart DNS services, and public DNS servers will also work — but won’t encrypt your traffic. To learn more about IPTV, we have a useful guide on what to do if IPTV is not showing TV guide, so be sure to check it out.
We also have a guide on what to do if IPTV is not working, so don’t hesitate to check it out for more potential solutions.
Either way, you can easily unblock your content. Happy streaming!
FAQ
1. How do I know if my ISP blocked my IPTV?
You’ll notice it as soon as you try loading up the app. You’ll get an infinite loading wheel and a message saying Playback Error.
2. Which VPN protocol to use for IPTV?
You’ll want the fastest protocols for streaming, such as Wireguard and PPTP. ExpressVPN’s Lightway is also a smart pick.
3. Which is a good free VPN for IPTV?
Generally, we don’t recommend free VPN services for IPTV as most major platforms quickly detect them.
4. How to make IPTV work with VPN?
The process will slightly differ depending on the device you use to stream.
It’s fairly straightforward for computers, mobile devices, and IPTV boxes that allow direct VPN installation.
You need to download the VPN onto the device, install it, and pick a suitable server.
If you’re using an IPTV box that doesn’t outright support VPNs, install it on your router. In all cases, you’ll bypass the Orange blocks of your IPTV.
If the above steps fail to fix the issue, here we have listed some of the workarounds that have been proven to resolve the 0x80073CFA error.
1. Uninstall the app or game via PowerShell
Press the Win + R keys to launch the Run console, type PowerShell, and press the Ctrl + Shift + Enter keys simultaneously to open elevated WindowsPowershell.
Next, run the below command in the Powershell (Admin) window and hit Enter to list the name of all the apps: Get-Appxpackage -Allusers
Now, from the list of all the apps, note down the PackageFullName of the app that you are unable to uninstall.
You should now run the below command and hit Enter to uninstall the app: Remove-AppxPackage -Package PackageFullName
Replace PackageFullName part with the name of the app you noted down in Step 3 that you want to uninstall.
The app should be successfully removed from your PC, and you should now be able to uninstall app/game without the error.
To open the Run console, press the Win + R shortcut keys. Type msconfig in the search bar and hit Enter to open the System Configuration window.
Select the Services tab, check the Hide all Microsoft services, and click on Disable all option. Press Apply.
Next, navigate to the Startup tab and click on Open Task Manager.
Select all the services in the Task Manager, right-click on each of them one by one, and select Disable.
Close the Task Manager window. Press Apply, then OK.
Select Restart in the new window that appears.
Once your PC enters the clean reboot state, you should be able to uninstall the Xbox Game Pass app or the game.
This method is also applicable if you see the error code 0x80073cfa on Xbox when you try to uninstall a game from the Gamepass on your PC or the Gamepass app itself.
According to Xbox users, can also power cycle the device, remove the profile, or reset the console to fix the 0x80073CFA error, and then try to uninstall the games.
However, if none of the above methods work, you can reinstall Microsoft Store, perform a factory reset of your Windows 11 PC, or perform a repair upgrade of your PC using this method (also applicable for Windows 11).
Wondershare Filmora is an easy-to-use and trendy video editing software that lets you empower your story and be amazed by results, regardless of your skill level. Filmora 12, the latest version of the app, will take your videos to the next level this season with 14 new features.
What is Wondershare Filmora 12 and how does it help you?
Filmora gives you a helping hand to get started with any new movie project by importing and editing your video, adding special effects and transitions, and sharing your final production on social media, mobile devices, or DVDs.
This tool is a cross-platform for making videos anywhere for all creators and you will experience brand-new ways to express yourself.
And if you have a powerful PC with NVIDIA’s latest RTX 40 GPUs will see immediate benefits with that enhancement from Filmora 12. The latest NVIDIA studio drivers are fully supported by the new Filmora update, which will greatly improve the speed at which your projects will become reality.
And as you will see, Wondershare added a whopping 14 new tools and functions and some of them are found in professional-level video editors.
What are the new features of Wondershare Filmora 12?
1. Multiple platform support
Now, Filmora 12 has dedicated apps for Windows and Mac, but also for iOS and Android mobiles, and even a dedicated app for iPad.
That means you can create and share your projects and videos on virtually any platform and thanks to cloud storage, move between them seamlessly.
2. Assets backup & sync
With the new Filmora 12, not only that you can upload your videos straight to your social media accounts or the cloud storage, but by default, you upload your projects straight to the Filmora Workspace.
This way, you may edit your videos anywhere with Filmora, whether on a desktop or on the go and everything will be stored in your dedicated personal cloud space.
For instance, if you’re editing a video on your PC at home, when you save it, it will automatically sync in the Wondershare Filmora Workspace.
Then, you may open your mobile or tablet when you’re away and find the project also synced there to continue the work.
3. Video review and collaboration
When you work with more Wondershare products or get Filmora 12 for studio creation, you can add more team members to your Wondershare ID.
This way, you may share your videos securely and invite your team to add time-coded notes and respond to comments via the Filmora Workspace cloud service.
So, although Filmora 12 is still a great tool for beginner video editors, it can still be used at a professional level.
4. Switchable workspace layouts
In the new Filmora 12, you may choose from 5 predefined workspace layouts that best fit your workflow and monitor size.
However, there is also a 6th, Dual Monitor layout to view media playback on an external monitor. The last one is activated only if you have a second monitor connected.
5. Enhanced keyframe
Another big improvement from Wondershare Filmora 12 is the keyframe which got very complex.
Now, it has been expanded to all parameters, including filters and color correction in addition to position, rotation, and scale.
The interface in Filmora 12 is starting to look more like the one in professional video editors.
6. Draw Mask
The masks in video editors are used to highlight or remove key objects from a clip and now, Filmora 12 has that option.
Create free-form shapes using the pen tool. It lets you freely draw complex mask shapes around objects, which can be either straight lines or curve segments with Bezier path.
Then you can extend the mask, blur the object within the mask, and if you invert it, you can highlight the object.
Of course, you can draw as many masks as you need for more objects and extend the effect to more frames.
7. Adjustment layer
Adjustment layers are another new improvement in Filmora 12. You can create adjustment layers to change the colors of your videos.
You should know that the effects applied to an adjustment layer affect all layers below it in the layer stacking order.
In other words, it will affect all the clips below it so you need to position it carefully. Of course, you may also include animations and transformations so it’s very helpful.
8. AI Smart Cutout
The new Smart Cutout tool allows quick AI-powered selections of both people and objects.
In fact, you may use a brush to highlight the exact portion that you need to cut out and the smart part is that the software tracks that part within all the frames.
Just like the Draw Mask, Smart Cutout is a tool that you usually find in pricy, more complex video editors.
9. AI Audio Stretch
With the AI-powered audio stretch tool, you can intelligently retime audio to match the duration of your video. No need to cut straight across or repeat the music again.
Of course, when you normally stretch an audio track, you will get a change in pitch but that’s where the AI comes into play.
No matter how much you time-stretch the audio, you won’t get any weird chipmunk effects, unless you really want to, of course.
But for that, you can speed up the audio because you have the setting for that within the audio adjusting options.
10. AI Audio Denoise
And as we’re still on the audio improvements side, getting rid of the unwanted noise in Filmora 12 has become more advanced.
The AI-powered audio denoise tool has a lot of layers of complexity. You may improve the speech, remove the wind effect, take out the reverb, remove the hum and hiss and set an overall effect of the Denoise.
However, you can’t listen to the track while you’re actually tweaking the levels. After each adjustment, you need to play the track again.
11. 3D Titles
Let’s face it! All the successful clips have awesome titles and animations and the new 3D Tiles in Filmora 12 will get you that splash of drama.
You can now choose from a library of 3D Titles but they also added Christmas and World Cup ones so you can spice up your videos.
12. More keyboard shortcut presets
If you’re a novice doing basic editing, you will not be probably interested in more shortcuts than saving your project.
However, if you’re all about productivity, you need fast navigation and operation.
For seasoned users, the software now offers the opportunity to use Adobe Premiere Pro and Apple Final Cut Pro sets of shortcuts.
Of course, you may also define your own shortcuts as you go. It’s only a matter of choosing the right ones for you.
13. Revamped Effects library
Wondershare always adds more and more video effects to Filmora and now, they restructured the Effects Library with more categories.
That will help you browse through effects quicker and find what you need a lot faster. For instance, now you’ve got them structured in categories like Utility, AI Portrait, Shake, Glitch, Distort, and more.
Of course, you still have access to the professional-level New Blue FX and Boris FX video effects that were introduced with Filmora 11.
14. New royalty-free music
There are now more than 100 new royalty-free background music tracks available in Filmora 12 and a lot of them are also free even if you’re using the trial version of the software.
We’re not talking about short audio effects. You can access, preview and download full songs from a lot of themes, including Christmas and World Cup.
What are the other key features of Filmora?
1. Huge library of content
It’s impressive how the library content of Filmora grew exponentially from one version to another.
Now, you have countless clips you can use, not only from the internal library but also from integrated sources like Pexels, Giphy, Pixabay, and Unsplash.
The music and audio FX libraries have grown too, and you may choose from hundreds of them.
We don’t even need to mention the thousands of objects, titles, stickers, and more elements you can add to your creations.
2. Steep learning curve
What was once a tool dedicated exclusively to beginners, Filmora 12 grew into a full-blown video editor for everyone.
The ease of use is still there, and although anyone can do simple video editing, Filmora has now a lot of advanced features that will cater to professional users.
For instance, by using Instant Mode, a beginner can create an amazing video in minutes just by using the huge assortment of templates and titles.
Just add at least 5 video clips, a soundtrack, and some transitional effects and that’s it, your video is ready to be uploaded to your social media page, shared, exported, or simply downloaded in amazing quality.
How much do I need to pay for Filmora 12?
For starters, Wondershare Filmora 12, comes with free testing version. That way, within certain limitations, everyone can test its features.
However, if you grow into it, you will need to pay for a plan to unlock all the features and content. There are a few plans to consider:
➡ Annual Plan – $49.99 for Filmora only and $70.99 for Filmora+Effects & Plug-ins
➡ Cross-Platform Plan – $69.99 for Filmora only and $90.98 for Filmora+Effects & Plug-ins
➡ Perpetual Plan – $79.99 for Filmora only and $100.98 for Filmora+Effects & Plug-ins
The addition of Effects & Plug-ins will add a slew of effects along with video, audio, and photo content you may include in your creations.
Wondershare Filmora 12
Create and edit beautiful videos by using a huge library of free content and video effects!
You know that the prices may change and Wondershare has the great habit of offering a lot of discounts on holidays, for students, and much more.
Pros
Easy to use by everyone
Huge library of free content
Cloud storage and collaboration
Dedicated apps for Windows, Mac, iOS and Android
Advanced AI-powered professional-level features
Cons
The content tends to load slower when you are using more apps at the same time
Final thoughts
We have tested the previous versions of Filmora and the latest version, Filmora 12, simply impressed us with its new features.
But we were expecting that. We’re talking about a product that received the Leader of Video Editing in the G2 Fall 2022 Report award and many other distinctions.
And the most important fact is that Wondershare managed to include so many advanced features without compromising the ease of use department.
The cloud sharing & collaboration, the multiple platform support, and the backup & sync features really stepped up the game for this software.
And even if it developed to be a strong video editor, Filmora 12 is still very accessible compared to other similar software on the market.
We strongly recommend downloading the tool and testing it for free so you may get to your own conclusions.
Lately, emails from outside your network can come into Outlook tagged or labeled with [EXTERNAL]. It indicates the email is coming from an External recipient.
However, some users dislike the labels, so they want to know how to remove External tags in Outlook. Likewise, users report the name cannot be resolved error they encounter on Outlook.
Why is Outlook showing an external tag?
There are some email security threats you should be worried about. Scammers send malicious or bad-willed emails to steal the recipient’s information or money.
So, external email tags are an essential security measure to help users identify threats like phishing, spam, and other malicious emails.
Why do my emails say external?
However, the External tag or label attached to Microsoft Outlook email is to warn users that the email did not originate from within the organization. So, it helps the admin track and identifies emails that are potentially dangerous or harmful.
Furthermore, not all Outlook emails with External tags or labels are suspicious or malicious.
1. Enable External email tags via Windows PowerShell
Left-click the Start button, type powershell, and click Run as administrator.
Click Yes on the User Account Control prompt.
Type the following lines and press Enter: Set-ExternalInOutlook -Enabled $true
Restart your PC and check Outlook after 24-48 hours to see if the External warning tag or label appears.
Users without the Outlook External tags can add it to their Outlook app. Note that it can take up to 48 hours for the External email warning to appear in Outlook after enabling it.
You already have Call of Duty installed on your Xbox console, but errors like code pilum and paging file error prevent users from enjoying the game.
When you see the error code pilum, you’re having trouble downloading or buying content on your Xbox.
The error code pilum doesn’t mean you don’t have Call of Duty on your Xbox, but sometimes it means there’s a conflict between the Call of Duty disc and your Xbox.
How can I fix the error code Pilum in Call of Duty MW and Warzone?
1. Restart your Xbox
Press and hold the Xbox button in the center of your Xbox controller to open the Power center.
Select Restart console.
Select Restart.
Restarting your Xbox is the quickest way to fix most problems with your Xbox console including the Purchase failed error code pilum.
2. Install the multiplayer pack
Completely uninstall all modern warfare content.
Select Network Settings.
Select Go Offline.
After downloading the disc content, go online and install the other items it prompted you to download. While you’re online, the Call of Duty purchase error will be gone.
3. Delete old data and clear the cache
Delete the marketplace system data
Press the Guide button on the controller.
Go to Settings, and select System Settings.
Select Storage, and then select your primary storage device.
Click on System Items.
Select Content Cache, and then select Delete.
Clear your console cache
Press the Guide button on the controller.
Go to Settings and then select System Settings.
Select Storage or Memory.
Highlight any storage device, and then press Y on the controller.
Select Clear System Cache.
When prompted to confirm storage device maintenance, select Yes.
Restart your Xbox console, and then retry your purchase or download.
4. Delete the content and download it again
Cancel all downloads
Press the Guide button on the controller.
Go to Games & Apps.
Select active downloads, and then select cancel all.
Delete partially downloaded content
Press the Guide button on the controller.
Select System Settings.
Click on Storage, and then select your storage device.
Press X on your controller for deletion suggestions.
Scroll through the suggestion and delete any content with a yellow exclamation mark.
Deleting partially downloaded content and clearing the system cache resolves the error code pilum in Modern Warfare and Warzone.
Click the game icon and then select all the data packs you want to install.
This will install all the packs missing without displaying the error code pilum.
6. Download the Call of Duty multiplayer pack
Go to Microsoft Store directly on your Xbox.
Search for Modern Warfare multiplayer pack.
Select the option that looks like the cover image of the box that came with the game.
Click on it. It’ll ask you if you want to install the pack.
Accept and install.
Use this method to install the multiplayer pack if you’ve tried to install it from the Xbox home page but weren’t successful. This solution will resolve the error code pilum.
7. Factory Reset your Xbox Console
Press the Xbox button to open the guide.
Select Profile & System.
Under Profile & Settings, choose System, then select Console info.
Select Reset Console.
On the Reset your consoles? Screen, you’ll see three reset options. Choose the one suitable for you. Here are the three options:
Reset and remove everything: This option removes everything from the console, including user data, saved accounts, apps and games. This is equivalent to buying a new Xbox console.
Reset and keep my games & apps: The second option resets the operating system and deletes all potentially corrupted data without deleting your apps and games.
However, if a significant corrupted file causes the Xbox error code pilum in the game, you’ll need to remove everything from your Xbox.
The factory reset method should be the last option because it deletes all your files that are not synced with the Xbox network. So, before you use this method, connect to the Xbox network and sync all your files.
As an Xbox user, you might encounter many Xbox errors aside from the Call of Duty errors while using this fantastic device.
We have many helpful articles to help you troubleshoot these errors. If you’ve been having Xbox One S errors this article will help you troubleshoot the issue.
Yesterday (4/5/2017), I successfully upgraded Windows 10 on two computers, but on my office desktop, it failed. It generated Windows Update error 0xc1900204 when trying to update from version 1607, OS build 14393.693. Searching for help on this error generated a number of pages relating to the Windows 10 preview or upgrading from Windows 7 to Windows 10, but I see nothing related to the newest upgrade.
In this article, we’re going to list a series of solutions to fix the 0xc1900204 Windows Update error.
What does error 0xc1900204 mean?
Error 0xc1900204 will appear while trying to download the latest system updates, and speaking of this error, here are some similar issues that users reported:
0xc1900204 upgrade – This error can appear while trying to upgrade system with the latest updates. If this happens, try running Windows Update troubleshooter and check if that helps.
Windows setup failed with hexadecimal exit code 0xc1900204 – Sometimes you might get this message while trying to install Windows. If you encounter this problem, you should be able to fix it by using one of our solutions.
Windows 10 Update Assistant 0xc1900204 – In some cases, users reported this error message while using Update Assistant, and to fix it, we recommend that you reset Windows Update components and check if that helps.
Windows Update requires certain services in order to work properly, and if there’s an issue with one of those services, you might encounter error 0xc1900204.
However, you can always fix the problem simply by resetting the required services. You can do that by following these simple steps:
Press Windows Key + X to open Win + X menu. Now select Command Prompt (Admin) or Powershell (Admin) from the list.
Type the following commands to stop the BITS, Cryptographic, MSI Installer and the Windows Update Services. Press ENTER each command:
Once these commands are executed, check if the problem with Windows Update still persists.
If you don’t want to manually run these commands, you can also create a Windows Update reset script that will reset the required services with just a single click.
3. Reset the registry
In some cases, error 0xc1900204 can be caused by your registry. Your registry holds all sorts of sensitive settings, and sometimes your settings might not be correct, causing the error to occur.
However, you can fix the problem simply by doing the following:
Type Windows Key + R. Type Regedit, then hit Enter.
Having a good third-party antivirus is important if you want to protect your PC from online threats, however, sometimes your antivirus can interfere with your system and prevent you from downloading updates.
It’s not uncommon for a third-party antivirus to cause error 0xc1900204, and in order to fix this issue, it’s recommended that you disable certain antivirus features and check if that helps.
If disabling antivirus features doesn’t solve the problem, your next step would be to completely disable your antivirus software.
In worst case scenario, you might have to completely remove your antivirus software. If removing the antivirus solves the problem, you should consider switching to a different antivirus software.
There are many great antivirus tools, but if you want great protection that won’t interfere with your system, you should consider Bitdefender.
5. Make sure that English is set as the default display language
According to users, sometimes error 0xc1900204 can occur because English isn’t set as your default display language. To fix this problem, you need to be sure that your registry is configured properly.
To check your settings, do the following:
Open Registry Editor.
Now navigate to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlNlsLanguage key in the left pane. In the right pane, locate InstallLanguage string and make sure that its set to 0409. 0409 is EN-US, but if you’re using a different type of English, you might need to use a different number.
After doing that, you just need to check if English is installed as the display language. To do that, follow these steps:
Open the Settings app.
When Settings app opens, go to Time & Language section.
In the left pane, go to Region & language. Now make sure that English (United States) is available and set as default display language. If not, click Add a language in the right pane and install US English as a default display language.
After setting US English as your display language, the issue should be resolved and you’ll be able to install updates.
This is a peculiar solution, but few users claim that it works, so you might want to try it out.
6. Scan your system for file corruption
File corruption can also cause error 0xc1900204 to occur, and to fix this problem, it’s advised to perform SFC scan. By doing so, you’ll scan your Windows installation and fix any corruption problems.
To run an SFC scan, you need to do the following:
Start Command Prompt as administrator.
When Command Prompt starts, enter sfc /scannow and press Enter to run it.
SFC scan will now start. The scan can take about 10 minutes, so don’t interfere with it.
Once the scan is finished, check if the issue is still there. If the problem still persists, or if you couldn’t run SFC scan at all, your next step would be to run DISM scan.
To do that, start Command Prompt as administrator and run the following command:
DISM /Online /Cleanup-Image /RestoreHealth
Once the scan is finished, check if the problem is still there. If the issue is still present, repeat the SFC scan once again and check if that solves your problem.
If you can’t download the latest update due to error 0xc1900204, you might be able to fix the issue by manually installing the update. To do that, just follow these steps:
Find out the KB number of the update. You can do that from Windows Update section.
Go to Microsoft’s Update Catalog, and search of that KB number.
List of updates will appear. Download the update that matches your system architecture and install it.
After doing that, your PC will be updated, and the problem will be resolved.
If you can’t fix error 0xc1900204, you might want to try performing an in-place upgrade.
This process is relatively simple, and it will install the latest version of Windows while keeping all your files and apps intact.
To perform an in-place upgrade, do the following:
Download Media Creation Tool and run it.
Run Media Creation Tool and choose Upgrade this PC now option.
Once the setup is prepared, click Download and install updates (recommended).
Wait while the updates are downloaded. Follow the instructions on the screen until you get to Ready to install section.
Click Choose what to keep and make sure to select Keep personal files and apps.
Now follow the instructions on the screen to complete the setup.
Once the setup is done, you’ll have the latest version of Windows 10, and the issue should be resolved.
We hope the solutions listed above helped you to fix error 0xc1900204. If you’ve come across other solutions to fix this update problem, list the troubleshooting steps in the comment section below!
If you want to learn how to lower GPU usage in Minecraft, you’re in the right place. It’s no secret that the more powerful your GPU is, the better your gaming experience will be.
However, you can make some tweaks and adjustments that’ll help regardless of your GPU type. Below we’ll address common culprits like outdated graphics card, resolution settings, and OS problems.
How do I fix high GPU usage in Minecraft?
Try out the following first before the advanced solutions:
Shut down your PC to cool before turning it on again.
1. Adjust the graphics settings
Hit the Start menu icon and select Settings.
Click on System, then select Display.
Navigate to the Scale & layout section, then under Display resolution, click on the drop-down menu and pick a lower resolution setting than your current one.
Some games and applications use more of your GPU than others. You may find Minecraft GPU usage is up to 100. So, if you’re playing a game with lots of graphics, lowering these settings could help alleviate the issue.
2. Update your graphic drivers
Click on the Windows button, type Device Manager in the search bar, and click Open.
Navigate to Display adapters to expand, right-click on your graphics card, and select Update driver.
Select Search automatically for drivers.
For a more thorough job, you will need automatic driver updater software. Outbyte Driver Updater is a handy and very effective tool that can help you to update your computer’s graphics card drivers.
Plus, the software can detect outdated or missing drivers and install the latest versions.
Press theWindows key, search for Windows Security, and click Open.
Select Virus & threat protection.
Next, press Quick scan under Current threats.
If you don’t find any threats, proceed to perform a full scan by clicking on Scan options just below Quick scan.
Click on Full scan to perform a deep scan of your PC.
Wait for the process to finish and restart your system.
Malware can sometimes interfere with hardware and cause problems with games and other software on your PC. A proper scan should point you in the right direction in securing your system.
Select Windows Update and click on Check for updates.
Download and install if available.
Minecraft is one of the most popular games in the world, and it is easy to see why. Gamers can enjoy this game, but oftentimes, they’re plagued with high CPU usage in Minecraft or even high GPU usage.
Following the steps below will help you optimize your PC for gaming. Windows 11 has already been dubbed the best gaming OS yet, so if you have yet to upgrade, you should consider doing so as soon as possible.
This isn’t the only GPU issue, and many reported that Minecraft is not using GPU, so don’t miss our dedicated guide that tackles it. You may also face issues with Minecraft not responding at some point.
Let us know if these solutions have decreased GPU usage in the comment section below.
Windows 10 added some major features, such as Cortana and the ability to manage virtual desktops. However, not all users plan to use them, and many wonder how to remove the search bar in Windows 10.
This is relatively simple, and in today’s guide, we will show you how to do it in just a couple of steps.
How to remove the Search bar from the Taskbar in Windows 10?
1. Hide it from the Search menu
Right-click on an empty space on your Taskbar.
From the menu navigate to Search.
Select the option you want, in our case, it’s the Hidden option.
This is the simplest way to hide the search bar on Windows 10, so we encourage you to give it a try.
2. Disable the search bar from Windows 10 registry
Press the Windows key + R and then type regedit. Press Enter.
Navigate to the following address: Computer\HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Search
In the right pane, double-click the SearchboxTaskbarMode.
Set the Value data to 0 and save changes.
As you can see, it’s pretty simple to disable the search bar in Windows 10 from the registry, so you might want to try this method.
Of course, just by removing the Search box, you won’t also disable Cortana. If you want to completely turn off Microsoft’s assistant, check out this guide to learn how to uninstall Cortana.
It is not uncommon to encounter Xbox not syncing data. This can be outright frustrating, considering that each time you have to begin right from the start.
Fortunately, we have a couple of solutions to help you resolve this.
How can I fix Xbox One if it’s not syncing data or is stuck?
1. Test network connection
Press the Xbox button.
Select Settings > All Settings > Network > Network Settings.
In the Network Settings page, select Test network connection from the options on the left.
This will initiate the test, which will run automatically and will inform you if your Internet connection has any problems.
2. Perform a hard reset
This can be done by pressing and holding on to the Power button for eight seconds or till the device shuts down.
Unplug the power cord from the rear of the console. Don’t plug it back in till at least 5 mins.
Plug the cord back in and restart the console.
You should be able to sync your game progress as before. If not, follow the below-mentioned steps.
3. Clear the local saved games
On the console, click on System settings > System > Storage.
In the Storage section, select Clear local saved games.
Also, ensure you have at least 20 percent of free space on your console hard disk drive.
4. Contact the game developer
If you are facing a syncing issue with a particular game, try getting in touch with the developers and see if it has something to do with their end. See if this solves your problem.
Microsoft Word allows users to create documents, edit, view, and share files with other users. However, it can take a while to get around working on the app which is why you should learn how to customize the Quick Access Toolbar on Word.
What kind of customization can you do to toolbars?
Microsoft Word is highly customizable and allows users to personalize the interface to an extent. However, there’s a limit to the level of customization you can do on the app.
Furthermore, users use the customization features on Microsoft Word to tweak it to suit their needs. The toolbar contains a set of commands that are not affected or bound but the currently displayed tab on the ribbon. It allows you to move the toolbar to another location.
Another customization option you can do to the toolbar is to add buttons that represent the commands to the functions of the toolbar. Also, you can create shortcuts for the toolbar commands to hasten your work on the app.
Fortunately, any customization process initiated on the Quick Access Toolbar is not visible only in the document. It applies to the whole Word app, so you require not customize the Quick Access menu for each document or task.
How can I customize a Quick Access Toolbar in Microsoft Word?
1. Add and remove commands from the Quick Access Toolbar menu
Launch Microsoft Word on your PC.
Click the down arrow button close to the top-right corner of the screen.
From the commands on the Quick Access drop-down menu, check the commands you want to add and uncheck those to remove.
Another step for removing commands from the Quick Access Toolbar is:
On the Quick Access Toolbar menu, right-click the command you want to remove.
Select Remove from Quick Access Toolbar on the drop-down menu.
Adding or removing commands from the Quick Access Toolbar allows you to customize the menu. It lets you determine the functions you want to include or remove from the toolbar.
2. Add a command that’s not on the ribbon to the Quick Access Toolbar
Launch Microsoft Word on your PC.
Click the down arrow button close to the top-left corner of the screen. Click on Customize Quick Access Toolbar from the drop-down, then select More Commands.
Go to the Choose commands from list, select the command not in the Ribbon, then click the Add button.
Adding a command from the list will include it in the Quick Access Toolbar.
3. Change the arrangement of the commands
Open Microsoft Word on your computer.
Right-click the Quick Access Toolbar, then select Customize the Quick Access Toolbar from the drop-down menu.
Select the command you want to move. Click the arrow-up or down to change the position of the command.
The Move up and Move down option allows you to arrange the commands in the Quick Access Toolbar as you please. Further, you can read how to fix Microsoft Word not working on Windows.
If the built-in Photos app doesn’t do it for you and you’re looking for a software that offers more options like image editing, support for multiple formats and photo management software features, keep reading.
Adobe Lightroom is for those who take their photos seriously. Whether you’re editing or organizing, this tool does it all.
It uses AI-powered sorting, tagging, and cloud storage, you can access your photos on any device. The editing suite is professional-grade, offering everything from exposure adjustments to color grading.
It’s not the cheapest, but if you want quality and features, this is the way to go.
Pros:
AI sorting and tagging for better photo organization
Cloud storage sync across devices
Powerful editing tools for exposure, color, and lens corrections
Non-destructive editing keeps your originals safe
Cons:
Expensive subscription model
Can be overwhelming for beginners
High system demands for smooth operation.
Adobe Lightroom
Want to take your photography seriously? Adobe Lightroom’s professional tools have you covered.
Movavi Photo Editor is the perfect balance of organization and editing.
It has smart features like face recognition and photo sorting by metadata, plus duplicate detection to clean up your library.
Editing-wise, it’s a step above basic viewers, allowing you to enhance your photos or remove unwanted objects. If you’re after a no-nonsense, yet feature-packed photo viewer, Movavi’s it.
Pros:
Face recognition for auto-sorting
Smart duplicate detection to clean up your library
Advanced editing tools like photo enhancement and object removal
Metadata sorting by date, location, and more
Cons:
More resource-heavy than simple viewers
Full features require a paid version
Slower performance with larger libraries
Movavi Photo Editor
Get Movavi if you want smart sorting and powerful editing all in one package!
ACDSEE Photo Studio Ultimate is a powerhouse, designed for photographers who need AI-driven organization and advanced editing tools.
Face recognition and auto-tagging help you keep your photo collection in order, while editing tools like noise reduction and color correction let you fine-tune every shot.
It’s got all the features, but it’s also expensive and requires a hefty system to run smoothly.
Pros:
AI-powered face recognition and auto-tagging
Professional editing tools like noise reduction and color correction
Non-destructive editing preserves your originals
Great for managing large photo collections
Cons:
Expensive, not ideal for casual users
Steep learning curve for beginners
High system requirements for optimal performance
ACDSEE Photo Ultimate
If you’re serious about photography and need pro-level tools, ACDSEE Photo Studio won’t disappoint.
5. ImageGlass – fast, lightweight, and customizable
ImageGlass is the no-fuss, super lightweight viewer you need if speed is your priority. With support for over 70 formats and a clean, customizable interface, it’s fast and efficient.
There’s no bloat here—just pure image viewing. It’s great for those who want something that works without taking up too much system power.
Don’t expect editing features, though; this is strictly for viewing.
IrfanView is an oldie but goodie. It supports over 70 file formats, and with plugin support, you can expand it to handle even more.
The interface is basic, but it’s fast and light on system resources. You can batch convert and resize images, and the program even includes some editing tools.
It’s perfect for people who want reliability without the fluff.
Pros:
Supports 70+ formats, including rare ones like PSD and RAW
Batch processing for converting and resizing images
You’ve probably seen this problem before. You’re playing Fortnite, everything is fine, and then suddenly the frame rate drops like a rock. You look at your GPU usage and it is off the roof! What’s going on and why is the GPU usage so high?
GPU usage is a metric that describes how much a graphics card is being used. If you’re playing a game or watching a video and your GPU crashes frequently, it means that the computer is using all of the processing power of the graphics card. So how do you fix it? We have some answers below.
Why is my GPU usage suddenly so high?
If you suddenly start seeing high GPU usage, there are a few common causes:
Processor-intensive programs – If you see a jump in your GPU usage when you run an application, it means there’s an application using the graphics card for rendering.
Recent app updates – If you have recently updated any software on your computer or installed new programs, there could be conflicts between them that are causing high GPU usage.
Malware or viruses – Malware, viruses, and other types of malicious software can sometimes cause your computer to use more GPU power than it should. However, it’s nothing a good antivirus can’t handle.
Hardware issues – If your graphics card has been damaged by dust, water, or other environmental factors, it may not be operating at its full potential.
Driver issues – Many of today’s PC games require the latest graphics hardware to run smoothly without lag or stuttering issues.
Power settings – If you have turned on power-saving features, these settings might be causing your PC to use more GPU resources than usual. You need to find the perfect power efficiency settings.
GPU is overheating – You should try to check the temperature of your GPU and CPU. If it is too high, it might be caused by overheating.
How do I fix high GPU usage while gaming?
Some basic checks that could help reduce GPU usage include:
Verify that you are not running any resource-intensive applications in the background.
Check to make sure that your GPU isn’t overheating.
1. Turn down the graphics settings
Hit the Start menu icon and select Settings.
Click on System then select Display.
Navigate to the Scale & layout section then under Display resolution, click on the drop-down menu and pick a lower resolution setting than your current one.
2. Update your graphic drivers
Click on the Windows button type Device Manager in the search bar and click Open.
Navigate to Display adapters to expand, right-click on your graphics card, and select Update driver.
Select Search automatically for drivers.
If you’re not an expert in these matters, you should consider using a third-party tool. Outbyte Driver Updater will scan your computer for outdated or missing drivers and then automatically download and install the correct versions of those drivers. It’s a simple process that will take just minutes to complete.
Overclocking is a way to make your CPU run faster than it normally would, which can result in higher performance at the cost of higher temperatures and more power consumption. If you’re overclocking your graphics card, that can also contribute to high GPU usage while gaming.
The best thing to do is turn off any overclocking software before playing games so that it doesn’t interfere with how well they run on their own without any additional adjustments.
Is 100% GPU usage while gaming normal?
Yes, it’s normal for your GPU to be 100% maxed out during gaming. In fact, it’s a good thing. Your graphics card (or GPU) is the most important part of your computer when it comes to getting a good gaming experience.
If your GPU isn’t working at full capacity, then you’re not getting the best performance possible from your PC. With that said, your graphics card should not always be using 100% of its processing power while you are playing games especially if you have other programs open at the same time.
If your computer is showing 100% GPU usage, it means that your graphics card is being overworked and can’t handle the task at hand (in this case, the game). 100% GPU usage when idle or Fortnite not using your GPU is, however, a cause for concern.
Most modern games are very CPU-intensive and the GPU only needs to do a little work. However, if you’re using a laptop with an integrated GPU, it’s also possible that your CPU isn’t powerful enough to handle the game. It will then offload some of its work onto the GPU instead.
If all else fails, it may be time to throw in the towel and get yourself a new graphics card. Sometimes it has to do more with your hardware than Fortnite itself.
Hopefully, your GPU is no longer high when playing Fortnite. Elsewhere, if Fortnite settings are not saving, we have a solution for that.
Let us know if you have noticed any improvements after trying out these solutions in the comment section below.
Outlook is an email client for sending and receiving emails, managing personal information, managing calendar events, etc. However, working on Microsoft Outlook can be easier by customizing the Outlook Quick Access toolbar.
What does the Quick Access toolbar do in Microsoft Outlook?
Many users attest that the Quick Access toolbar is one of the best features. Microsoft Office apps. The Microsoft Quick Access toolbar is a menu usually found at the top-right or left corner of the Microsoft Outlook app.
Furthermore, the idea of the Quick Access toolbar depicts what the name suggests. It provides convenience and easy access to users, allowing them to use their most needed and commonly used features in Outlook.
Likewise, it contains features such as Undo, Save, New, Sort ascending and descending, etc., which are available at users’ reach. In short, the Quick Access toolbar contains the necessary commands for working with Microsoft Office apps.
Moreover, users can import and export the Quick Access toolbar settings from one Microsoft Office app to another for uniformity.
How can I customize Outlook’s Quick Access toolbar?
1. Add or remove commands to the Quick Access toolbar on Outlook
Launch Microsoft Outlook on your PC.
Click the drop arrow button, then select Customize Quick Access Toolbar from the drop-down.
Select a command to add to the Quick Access toolbar.
If you can’t find the command you want to add, click the More Commands button at the bottom of the drop-down menu.
Select the command you want to add, click Add between the two panes, then click OK.
However, click the Remove button if you want to remove commands from the Customize Quick Access Toolbar.
Adding or removing commands from the Quick Access toolbar allows you to select the commands that are to be in the Outlook toolbar.
Many Xbox users reported having audio issues when attempting to record their gameplay. Recording with Xbox Game DVR seems to leave the Xbox clips audio out of sync. According to users, gameplay clips generally registered a 3-second audio delay.
We found a series of solutions to fix this problem and we’ll list them below.
How do I fix Xbox game clips audio out of sync?
1. Do a hard reset on your Xbox
Hard resetting the console is a common solution for many issues. You can perform a hard reset by following these steps:
When the console is on, hold the Power button for several seconds until it turns off
Remove the power plug from the power socket. Wait at least one minute before plugging it back in
Plug it back in, turn on the console and see if it worked
If it didn’t work the first time, try doing it a few more times.
2. Switch the console to energy-saving mode
Apparently, this issue is caused due to a conflict between the power settings and network conditions. To fix the problem, follow these steps:
Set the console to Energy Saving mode
Keep the Power button pressed until the console shuts down
Turn the console back on
Play the recorded clips to see if the audio is now in-sync.
3. Convert the video file from a variable frame rate to a constant frame rate
When recording a clip, frame drops may occur due to low computer performance.
This may cause the audio to get out of sync.
Although it may seem that you are recording at a constant frame rate, short drops in frame rate could be the root cause of the issue.
Bringing the video to a constant frame rate requires you to get software capable to complete this task.
We recommend that WinX Video Converter will help you convert or compress various files at any time.
After installing the software, follow the next steps:
Open Handbrake > click Source > File
Go to the location of the video you want to convert, click on it and press Open
Select the Video tab, choose Constant Quality > select desired frame rate
Click the Start button
Wait for the process to finish
Open the newly created video file in a video player of choice to see if it worked
We hope that our solutions were of help. If any of our methods worked for you, or you came across additional solutions, do let us know in the comment section below.
Let’s check out the best Android emulators for your Windows 11 PC. Whether you want to run a game on your PC or access a really neat productivity app, you’ll find a reliable tool to do so below. Not all are made equal, so make sure to stay until the end to figure out which one is the best for you.
Running on the latest Android OS, it offers features like keyboard mapping, macros, high FPS, and multiple instances. You can game on one instance and use a productivity app on another.
Allocate CPU and RAM per instance, perfect for playing demanding games like PUBG Mobile alongside lighter apps.
LDPlayer also lets you tweak graphics settings for higher FPS and supports game controllers for flexible gameplay.
LDPlayer
This simple and modern emulator offers multiple Android games in the same session.
The Bluestacks Android emulator for Windows 11 is one of, if not the most popular Android emulators, and for a good reason.
It specializes in video games. The user interface makes it very easy to access games and supports all titles on the Google Play Store.
However, it’s not limited to the Google Play store. This is thanks to supporting APK files. Plus, Bluestacks offers custom key mapping so you can use your configurations.
The free version has advertisements throughout the app, while the paid version takes them away and gives access to new features like a special support channel.
The only negative thing you can say about Bluestacks is how slow it is when it comes to productivity apps and other non-video games software.
Bluestacks
Enjoy your favorite Android games and apps with this powerful emulator.
MEmu isan Android emulator for Windows 11 64-bit that is similar in speed and processing to Bluestacks.
And unlike Bluestacks, this emulator works well with non-gaming and productivity apps. You won’t see any slowdown with apps like Instagram or WhatsApp.
MEmu also supports running multiple instances simultaneously, so you can play multiple games or explore the emulator’s full capability.
You won’t have to be restricted to Google Play either, as you can drop and drop APKs from your computer onto MEmu and play it that way.
Next up is NoxPlayer, another well-known Android emulator for PC that has more than 150 million users. It’s built on Android Lollipop and has the Google Play store built into it.
Like some of the other apps on this list, you can upload APK files obtained from other sources and play them without issue. Nox has a lot of customization options and the ability to root your Android phone.
The point is to allow people to replace system apps and settings with specialized ones. It opens up new world possibilities.
Other notable features include recording macros for keys, adjusting FPS configuration, taking screenshots, and recording the screen. There’s a version for Macs if you have a Macbook.
Ko Player is a great Android emulator for how easy it is to set up and use. Its main purpose is to deliver the best gaming experience possible without lag.
It’s a lightweight app, making it a good Android emulator for low-end PCs. Ko Player is free to use, with a few ads here and there to support the developers, but it’s not as intrusive as Bluestacks.
The player has a great user interface, keyboard mapping, and controller support. You can also connect a microphone and camera to live stream while you play.
Be aware that people have complained about how buggy Ko Player can be, with some experiencing sudden crashes mid-game.
Gameloop is primarily used as a gaming platform, and it is used by tech giant Tencent’s official emulator. In fact, Tencent considers it to be the best emulator of Call of Duty: Mobile and PUBG Mobile.
The emulator takes full advantage of your CPU, GPU, and RAM to render Android games of the utmost quality. And it’s specially optimized for lag-free play.
It has keyboard and mouse integration and even an anti-cheat system. Since Gameloop is partnered with Tencent, the online mostly have games from that developer.
While its library isn’t the biggest, Gameloop supports major titles like Candy Crush Saga, Clash Royale, and more. Best of all, it’s free, with no extra feature hidden behind a premium version.
Android Studio is the closest thing to an official emulator since it comes from Google. The main purpose of Android Studio is app development.
So, while you can use the emulator built into the software and use it to play games, it’s not the easiest to use. The UI isn’t easy to use.
It supports the latest Android operating system, but you can also emulate older versions. Android Studio has various tools and plugins to test its apps.
Android Studio works on many desktop operating systems, from Windows 8 to 11, and even some Linux systems.
As such, Android Studio can be difficult to set up, plus there’s no direct access to an app store, but you can upload APKs. Some people have noted some difficulty with launching the app.
What is the best free Android emulator for Windows 11?
LDPlayer is the best free Android emulator for Windows 11. It packs in many gaming features that can not be found on some of the paid emulators.Also, it has many productivity-enhancing features, like handling multiple instances at once. To read more and download this app, check our detailed guide in the section above.
Is Nox or BlueStacks better?
Both Nox and Bluestacks are popular Android emulators and the better choice depends on what you want to use them for. Bluestacks is better for gaming, with features like multi-instance support and advanced key mapping. Nox is lighter and more customizable. And while it supports games too, it does a better job when it comes to running other types of apps, like productivity ones.
If you want to sideload apps, and create custom ROMs flash and firmware upgrades, you have to download and install the ADB drivers on your Windows 11 PC. Find below all you need to do to get started.
How can I download and set up ADB drivers on Windows 11?
2. When prompted, check the terms and condition checkbox and click the Download Android SDK Platform-Tools for Windows button.
3. Once the download is finished, locate the downloaded file and move it to the root folder of the C drive. If you’re not familiar, that’s C:\
4. Right-click the zip file and select Extract all.
5. Now, click on Extract to start the process.
6. Wait while the files are being extracted.
7. Go into the folder that you extracted.
8. Right-click the empty space and choose Open in Terminal.
9. Run the following commands: cmdadb devices
After doing that, you should see the list of all devices connected to your PC. That is how you can download and install the ADB drivers for a 64-bit Windows 11 system.
You can install ADB drivers manually and also check related tools such as the Google USB Driver available on this installation guide for users who need complete Android device support.
2. Download and install the ADB drivers automatically
You can also download the Windows 11 ADB driver automatically with a top-notch driver updater. This option saves you the stress of going through the enormous steps listed in the first solution.
With a large database of original drivers from thousands of developers, you are sure to get all the drivers you need to avoid errors on your PC.
ADB drivers are generally safe. They do not make unnecessary changes to your PC, as they only serve as a bridge between your system and the Android device.
ADB drivers can only become a problem if you use them wrongly. And that can also be salvaged by uninstalling the drivers.
Why is Windows 11 ADB not working?
It’s possible that your environment variables aren’t correct, so you need to adjust them if you want to fix this issue. You also need to check your phone settings and ensure that features such as USB Debugging are enabled before using ADB properly.
Some of our readers have recently reported that they encounter the Microsoft Store not enough space error. They claim they experience this error pop-up when downloading some applications from the Microsoft Store.
In case you’re experiencing this problem, you can explore any of the advanced solutions provided in this article.
What causes the Microsoft Store not enough space error?
There can be several reasons why you are experiencing the Microsoft Store not enough space error. The following are some of the potential reasons reported by some users:
Insufficient disk space – This error is mostly inevitable if your PC is low on disk space. You simply need to perform a Disk Cleanup to free some space on your PC.
Running an outdated OS or Microsoft Store – If either your operating system or Microsoft Store App is outdated, you may encounter this error. Hence, check out what to do if your Windows Update fails to work.
Your Temporary folder is full – Your temp folder may quickly be filled up with application (.appx) files used by Microsoft Store. If the Temporary files are not deleting, check out our recommended fixes in this guide.
Now that you know some of the possible reasons behind this error if your Microsoft Store says not enough space but there is, you can proceed to our next section to know how to fix this problem.
What can I do if there’s not enough space on Microsoft Store?
Below are some preliminary checks that may do the trick:
Install all pending Windows updates since it helped some users fix the error.
If the above checks don’t work for you, you can explore the advanced solutions provided below.
1. Clear the Microsoft Store cache
Press the Windows key + R keys to open the Run dialog box, type wsreset.exe in the dialog box, and select OK.
A blank Command Prompt window will open and close in about 10 seconds, and the Microsoft Store will open automatically.
It should take about 10 seconds to clear your Microsoft Store cache once you see the blank cmd window. Also, this fix can also troubleshoot the Microsoft Store if the cache is damaged.
2. Run the Microsoft Store Troubleshooter
Left-click on Start on your Taskbar and select Settings.
Under the System tab, click on Troubleshoot.
Next, click on Other troubleshooters.
Next to Windows Store Apps, select Run.
Follow the on-screen instructions to complete the process.
Using any virtualization software, your PC will run two operating systems simultaneously, so issues are bound to appear if the setup is not completed correctly.
Before you start using virtualization on your PC, be sure to check if your PC meets the VMware requirements.
What does the operating system wasn’t found error mean?
An Operating system error is displayed when the BIOS cannot find an operating system on a hard drive from your system. This is just one of many VMware Workstartion errors that you can encounter.
As you can see below, there are plenty of variations to this error, including some common types of devices and error formats.
What are the most common variations for this error?
An operating system wasn’t found; try disconnecting any drives from VMware – This issue can be caused by the virtual machine trying to boot from another drive.
Exiting Intel PXE Rom operating system not found VMware – It is the same error with the VMware Intel PXE ROM OS.
VMWare operating system not found VMDK – The VMDK (Virtual Machine Disk File) was not found and VMware is not booting.
Operating system not found in VMware Workstation 16 – This issue is present mostly on version 16 of the WMware Workstation.
The operating system was not found VMware ESXi – The ESXi is an optional component in WMware that partitions into multiple virtual machines.
VMware operating system not found on Mac – Of course, this error manifests itself on Mac as well.
The operating system was not found VMware on Ubuntu – You can create a virtual OS on Ubuntu and this error is also present.
Choose the Installer disc or Installer disc image file (ISO) if you face a disc drive or a file that contains the OS.
Set a name for your VM and a location where the file will be saved, and click Next again.
Define how storage should occur with this VM, and then press Next.
Adjust the hardware settings if needed and click Finish.
Follow any on-screen prompts to begin the OS installation.
Speaking of hardware customization, if you’re planning to run Windows 11 on a virtual machine, you need to enable TPM in VMware first. Don’t worry, it’s simpler than you think. Also, don’t hesitate to check out the best VMs that work perfectly on Windows 11.
Check the link below if you want to learn more about the VMware Workstation and how to download and install it.
Running into Ticketmaster Error 5005 can be frustrating, especially when you are in the middle of buying tickets and the site suddenly throws a credit card error code 5005 or the dreaded “Oops, something went wrong”. The good news? This is not a permanent block. It is a solvable issue once you know what is really causing it.
This error is not just a random glitch. It usually signals that Ticketmaster’s security system detected something unusual about your payment method or account activity.
Fraud protection kicks in when your bank has not approved 3D Secure verification by SMS or phone.
Silent payment blocks happen when your bank quietly rejects Ticketmaster charges, even if your account looks fine.
Outdated payment details such as a wrong billing address or expired card can cause the transaction to fail.
Account flags from refunds, disputes, or chargebacks may temporarily lock your account.
If you have seen issues like “pardon the interruption” or Ticketmaster not sending verification codes, these often come from the same fraud prevention filters at play.
How to Fix Ticketmaster Error 5005
Here is a step by step guide, with context for why each fix works.
1. Contact Your Bank or Card Issuer
Call your bank and ask if they blocked the charge.
Request them to whitelist Ticketmaster transactions.
Confirm that 3D Secure such as Verified by Visa or Mastercard SecureCode is enabled.
Banks often block Ticketmaster purchases because they can come through international processors or trigger anti fraud filters. Even if your account balance is fine, a silent block can still prevent the payment. Enabling 3D Secure ensures the transaction passes extra verification and clears the most common payment authorization issue.
2. Update or Re-Enter Payment Info
Log into your Ticketmaster account and open My Account > Payment Options.
Remove any old saved cards.
Manually add your card details again. Do not use browser autofill.
Match the billing address exactly with what your bank has on file.
Even tiny mismatches such as abbreviating “Street” as “St.” can trigger a block. Ticketmaster’s payment system is strict about billing details. Updating your card info forces a clean validation with your bank, which often clears a Ticketmaster purchase error message.
3. Try a Different Payment Method
Use another debit or credit card.
Switch to PayPal or Apple Pay if available.
Buy a Ticketmaster gift card and use it to complete the purchase.
Many users report that simply switching cards solves the issue instantly. PayPal often bypasses the bank’s card level fraud filter because it handles authorization differently. Gift cards work as a last resort when banks keep blocking your primary card, and they can help you avoid another ticketmaster unexpected error during checkout.
4. Clear Cache, Sign Out, and Retry
Log out of Ticketmaster on all devices.
Clear your browser cache and cookies.
Try again in Incognito or Private mode, or use a different browser.
Ticketmaster caches session data. If your payment attempt failed once, the site may remember the failed state and keep blocking you with a generic Ticketmaster error message such as “We’re sorry, something went wrong.” Clearing cookies resets the checkout session and removes stale tokens that can interfere with a fresh authorization attempt.
5. Disable VPNs, Proxies, or Apple Private Relay
Turn off any VPN or proxy apps on your device.
Disable Apple’s Private Relay if you are using iOS.
Retry the purchase without a masked IP address.
Ticketmaster’s fraud detection systems are sensitive to masked or frequently changing IP addresses. If you use a VPN, the system may treat your login as suspicious, especially if the IP shows a different country. Disabling these tools prevents a false positive that can lead to “Ticketmaster oops something went wrong”.
6. Resolve Account Flags With Ticketmaster
Check if you recently refunded or disputed tickets, or have a pending inquiry.
Contact Ticketmaster Support or the Fraud Department and request a manual review.
Ask if your account is flagged and confirm identity if needed.
If you have requested refunds or had repeated failed transactions, Ticketmaster can place a fraud hold on your account. A support agent can clear the hold once they verify your details. This directly addresses situations where you see “Ticketmaster an error has occurred” with no clear explanation.
7. Switch Device or Network
Try a different device such as switching from computer to phone, or the other way around.
Change your connection from Wi Fi to mobile data, or restart your router to refresh your IP.
Log in only on one device during checkout.
Sometimes, the block is tied to your IP address or browser fingerprint. A new device or network resets how Ticketmaster sees your connection. This can immediately bypass a persistent “something went wrong Ticketmaster” loop that is not related to your card limits.
Quick Fixes That Work for Most Users
Switch to PayPal or a different credit card.
Delete and re add payment details, then try again.
Ticketmaster throws different messages depending on what went wrong. Here are the most common ones tied to this error:
“We’re unable to process your request. Please try again later.”
“Your payment method was declined. Please use a different card.”
“Payment cannot be authorized. Please contact your bank.”
“We’re sorry, something went wrong. Please try again.”
“Error 5005: Unable to complete your purchase at this time.”
“Transaction failed. Please use another form of payment.”
If it says “declined”, your bank rejected the charge. If it says “unable to authorize”, 3D Secure failed. If it just says “something went wrong”, Ticketmaster itself flagged your account.
This is a catch all error that usually means your payment was blocked either by your bank or by Ticketmaster’s fraud filters.
Is Error 5005 permanent?
No. Once you clear the fraud check or update your payment method, you should be able to purchase tickets again without a Ticketmaster purchase error message.
Do I always need to call my bank?
Not always. Many users fix it by switching to PayPal or re entering their payment info. If your card keeps failing, your bank’s fraud department must clear the block.
Does changing devices really help?
Yes. Some users fixed the issue instantly by switching from desktop to mobile. Ticketmaster’s system can flag specific browser sessions, so a fresh device can reset your status.
Conclusion
Error 5005 on Ticketmaster is not just a glitch. It is a clear sign that your payment method or account was flagged for security reasons. The fixes above target both your bank’s side and Ticketmaster’s systems, covering payment verification, account flags, and technical issues. Start by confirming your card is authorized, re entering details, and trying another payment option like PayPal. If all else fails, contact Ticketmaster support directly. With a bit of persistence, you can clear this error and complete your purchase without losing your tickets.
Some users experience system error E101 on Xbox One when they try to update their consoles. The error message displays an E101 code that includes other numbers.
Consequently, users can’t play games on their Xbox One consoles. So, it’s a serious error code, but there aren’t many confirmed resolutions.
You can go straight for the Offline update, and we will guide you through the process step-by-step. If that does not work, follow the other solutions.
Press the Windows key + E keyboard shortcut to open File Explorer.
Open the OSU1 ZIP in File Explorer.
Select the Extract all option to open the window shown below.
Press the Browse button to select a path to extract the ZIP to.
Then click the Extract button.
Open the extracted OSU1 folder in File Explorer.
Select the $SystemUpdate file and click Copy to.
Click Choose location on the Copy to menu to open a Copy Items window.
Then select to copy $SystemUpdate to the USB drive.
Remove the USB drive from the laptop or desktop.
Unplug the Xbox One, and then plug it back in again after a few minutes.
Press the Bind and Eject buttons, and hold those buttons to keep them pressed. Then, with the Bind and Eject buttons held, press the Xbox button.
Let go the Bind and Eject buttons after the second power-up tone. Thereafter, the Xbox One should start up at the Xbox Startup Troubleshooter.
Next, insert the USB drive that includes the update files in an Xbox One USB slot.
Select the Offline system update option with the controller’s D-pad and A button to initiate the update.
Thereafter, wait for the console to update and restart.
Microsoft’s resolution for error code E101 is to update the Xbox One offline. Get an empty four to five-GB USB drive formatted with NTFS to do that.
2. Use the Xbox Startup Troubleshooter
Completely power off your console. Disconnect if from power.
Wait for 30 seconds, then plug it back into power.
Press and hold the Pair button (located below the Xbox button on the console) and the Eject button (located on the front of the console), and then press the Xbox buttonon the console.
Hold the Pair and Eject buttons for about 15 seconds.
Release the buttons after you hear 2 power-up tones.
The console should open directly to the Troubleshoot menu.
Plug the USB flash drive with the Offline System Update files into a USB port on your Xbox console.
Select the Offline System Update and update the console.
You can use the Xbox Startup Troubleshooter to update your console. You can access it from the Something went wrong screen by using the D-pad+ and A button on your controller.
If you can’t bring the Troubleshooter from the Something went wrong screen, where you should see the error, follow the steps above.
If the above resolutions don’t fix the system error E101, there might be a hardware issue. In this case, users will need to return their Xbox One consoles to Microsoft for repairs.
An update can break your Xbox One in such a way that you have to send it to the service. However, this is a rare event, so don’t be afraid to update your devices.
The big M offers a free repair service for Xbox One consoles still within their warranty periods.
These potential resolutions might fix the system error E101 Xbox One for you. Please feel free to write us any suggestions or if these solutions helped you in a comment below. And for more useful tips, don’t hesitate to check out our guide on solving system error code E106.
Squanch Games’ colorful and comedic first-person shooter High on Life released on December 12th for Xbox One and Series X|S consoles as well as on Windows. It was also a day one Game Pass release. Since that time High on Life has gone on to become the biggest Game Pass launch for 2022 in terms of the number of hours played in the first five days of release.
Not only that, but High on Life is now the biggest single-player game launch ever on Game Pass, as well as the biggest launch for a third-party game in the history of the service.
High on Life has become the biggest Game Pass launch of 2022, the biggest 3rd party Game Pass launch in history, and the biggest single-player Game Pass launch ever! https://t.co/6bVcUPbEXz
As you might imagine, the developers of High on Life are riding pretty high themselves right now over the game’s success, as are all those involved with bringing the game to Game Pass. General Manager of Content Planning at Xbox Matt Percy had this to say,
High On Life is an incredibly unique title that we’ve been excited about for a long time. It’s fantastic to see so many Game Pass members jump into it at launch to experience Squanch’s story for themselves ahead of the holidays.
High on Life follows the story of a human bounty hunter who teams up with talking, sentient weapons called “Gatlians” to take on an alien drug cartel called G3, with the drugs being humans. The game incorporates adventure and metroidvania elements into its shooting. The game was co-developed by Justin Roiland of Rick and Morty fame.
Core isolation’s Memory integrity feature on Windows 10 and Windows 11 helps enhance security. By enabling this feature, you can fight against extreme cybersecurity threats and malicious code. To enable memory integrity, you can use Windows Security, or make a quick edit to enable it via the Windows Registry Editor.
Why turn on Core isolation’s Memory integrity?
Memory integrity or Hypervisor-protected Code Integrity (HVCI) is a feature under Core isolation that is available on Windows 11. The core isolation technology contains the core processes of Windows but uses memory in a virtualized environment instead.
If Core isolation’s Memory integrity is turned off, you should enable it right away to protect your machine. Here are the benefits:
Protection against malicious code:
Prevent hackers from taking control: Enabling Memory integrity prevents unauthorized access to your PC, by hijacking unsecured drivers on your machine.
Enhances overall security: HVCI improves overall security and protects your privacy on a Windows 11 PC.
Turn on Memory Integrity on Windows 11
If you want to activate Core isolation’s Memory integrity feature on your Windows 11 PC, you have to make sure a couple of things are enabled first:
Enable virtualization on your PC. If it is disabled, you may need to enable it on your motherboard BIOS. Check your PC’s motherboard manufacturer for more information.
Update Windows to the latest version. Just to be on the safe side and ensure you have the latest updates, it’s important to keep your PC up-to-date.
After you have verified your machine has virtualization enabled and your Windows 11 version is updated, follow these methods to enable memory integrity on Windows 11.
1. Enable using Windows Security Defender
Here’s how to enable Core isolation’s Memory integrity using Windows Security Defender.
Click Windows 11 Start and type “Windows Security” and press Enter.
Go to Device security and click Core isolation details.
Under Core isolation, make sure the Memory integrity toggle is turned on.
You may need to restart your PC for the changes to take effect.
2. Enable using Registry Editor
Please note: Before using this method, make sure your PC and CPU are fully compatible with Windows 11. If you try to enable this feature on unsupported CPUs, you may run into trouble, so keep that in mind. Here’s what you need to do.
Click Windows 11 Start and type “regedit” and press Enter.
Navigate to the following location: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\DeviceGuard\Scenarios\HypervisorEnforcedCodeIntegrity.
Double-click on Enabled.
Set the value to 1 and click OK.
Restart your PC for the changes to take effect.
Editing the Windows Registry should be used as a last resort to force-enable Windows 11 features. If you installed Windows 11 without TPM 2.0, you may not be able to enable Core isolation’s Memory integrity feature.
Core isolation’s Memory Integrity
Core isolation is a revolutionary technology tool for Windows 10 and Windows 11. By default, Core isolation’s memory integrity feature should already be active and ready to use on your PC.
Do you have a different method to enable Core isolation on Windows? Let us know in the comments.
Witcher 3: Wild Hunt is a Windows game that has had rave reviews. However, some players have reported crashing issues because of which the game completely freezes, but you could hear the audio running in the background.
The Witcher 3 freeze with the sound problem is annoying as it doesn’t display any error message when a crash occurs. Consequently, players can’t continue to play Witcher 3 when it freezes.
What are the causes for Witcher 3 freezing with sound?
There are quite a few potential causes for Witcher 3 freezing. After some research, we have deduced a list that contains some of the most common reasons, you could face Witcher 3 freeze with sound error.
Outdated graphics driver: It can often be a graphics card driver issue. The game will likely crash on PCs with faulty graphics card drivers or ones that aren’t updated.
Corrupt of missing Witcher 3 games files: Games can become unstable when some of its game files are missing or corrupted. Therefore, verifying the integrity of the game’s files can sometimes help resolve crash issues.
High graphics settings: Overly high graphical settings might also cause Witcher 3 to freeze up as the settings might not be suitable for the processing available. However, some players’ PCs don’t have suitable video cards for supporting the highest graphical settings. Certain specific in-game graphical settings can also generate issues.
How can I fix Witcher 3 freezing then?
Here are a few preliminary solutions that we would suggest you apply:
Restart your PC. Chances are that there is a temporary glitch that is causing the Witcher 3 freeze with sound error. Restarting will help load all files from scratch.
Restart the game itself. The same thing can happen with the game files, and a simple restart can help you load all game files correctly.
Now, let us check out the advanced troubleshooting solutions and possibly fix the Witcher 3 freeze with sound error.
1. Verify the game’s file integrity on Steam
Open Steam.
Click Library.
Right-click Witcher 3 and select Properties.
Select the Local Files tab.
Click the Verify Integrity of Game Files option.
Wait for the file validation process to complete.
Click the Close button.
NOTE
The Epic Game, GOG.com, and Origin game launchers for Witcher 3 also include similar verification (or repair) options for games. So, players must also verify Witcher 3’s files with those game launchers.
2. Undo PC overclocking
Open the PredatorSense app.
Select Normal under Overclocking section.
Set the Fan control to Auto.
Close the app, relaunch the game and check if this resolves the issue or not.
The above steps are for users who have Acer Predator laptops. You can follow the same steps on your brand’s laptop.
If you’ve overclocked your PC with overclocking software, such as MSI Afterburner, undo all the overclocking applied. Restore all overclocked settings to their default values. It’s especially recommended to turn the Core Clock setting down in MSI Afterburner, and other overclock software.
3. Select the Prefer maximum performance power setting
Open the NVIDIA Settings system tray icon.
Select Manage 3D Settings on the left of the NVIDIA Control Panel window.
Select the Prefer maximum performance option on the Power management mode drop-down menu.
Select your PC’s graphics card and platform on the NVIDIA or AMD menus, and click the Search or Submit button.
Download the latest compatible driver for your PC’s GPU.
Install the NVIDIA or AMD graphics driver.
Go through the installer wizard to install the driver.
7. Uninstall NVIDIA GeForce Experience
Open the Start menu.
Open Control Panel.
Select Programs and Features.
Select the NVIDIA GeForce Experience software.
Press the Uninstall/Change button.
Follow the on-screen prompts to remove the GeForce driver from your PC.
You can more thoroughly remove software with third-party uninstaller utilities like IObit Uninstaller. IObit Uninstaller is a freely available utility that also erases all leftover files and registry entries from uninstalled software.
If nothing works, then you can contact the CD Projekt Red Support service for Witcher 3. To do that, open Witcher 3’s PC contact form page in your browser. Select your platform on that form, and then type a brief message that describes the issue in the text box. Click Submit to send the support ticket.
Players have confirmed the potential resolutions above can fix Witcher 3 freezing. So, there’s a pretty good chance those fixes will stop the game freeze crashes for most players. Some of the general resolutions in our fix game crashes guide might also be useful for fixing Witcher 3 freezing.
We are almost at the end of 2022, and Microsoft has been adding a plethora of features to Excel in a bid to enhance its user experience. And this month isn’t any different, Microsoft released a bunch of nifty features to Excel for the month of December. Here’s everything you need to know:
Excel for the web
Microsoft has incorporated a neat feature in Excel for web users, Formula suggestions. Essentially, after hitting the “=” sign in a cell or the formula bar, you’ll now get automatic suggestions for the best formula to use. This will be based on contextual insights from your data. At the moment, you’ll get suggestions for the following formulas: SUM, AVERAGE, COUNT, COUNTA, MIN, and MAX.
Next up is Formula by Example. This feature is designed to establish a pattern while users are performing manual and repetitive data entry in a column. In the event that Excel identifies one, it will suggest to the user to complete the entire column with a formula. Just like Flash Fill, but this time, its formulas being suggested not static text.
Moreover, users will now be able to correct broken links with the new Suggested Links feature. “Suggested Links allow for new cloud workbook storing for data that detects when an external link to a Cloud workbook is broken and suggests you a new location to fix the broken link,” says Microsoft. Suggested links is rolling out to Production at the moment.
Excel for web users will also be able to make queries easily with the newly added search bar in the queries pane. And finally, with the IMAGE function, users will be able to add images to cells from a source location together with the alternative text.
Thus making it easier to feature images in the worksheet instead of having them float at the top, what’s more, you can move, sort, filter as well as resize the images within the Excel table.
Excel for Windows
Microsoft has added a new shortcut for Excel for Windows that will allow them to open the Power Query Editor easily. That is: Press Alt + F12 (Win32).
Next up is the new capability to create nested Power Query data types that will allow users to arrange and manage their data better. Unfortunately, this feature is only rolling out to Insiders at the moment.
Furthermore, Microsoft has added support for Get Data from Table/Range. In turn, users can import data from Dynamic Arrays, thus allowing them to load them into Power Query and transform the data. At the moment this feature is rolling out to Windows Production. And finally, Excel for Windows is also getting the IMAGE function.
Excel for Mac
Excel for Mac now has a new shortcut that will help users to easily open the Power Query Editor. Simply press Option + F12. Likewise, Mac users will also be able to access the IMAGE function.
To get information on which features are available to you or find which version of Excel you’re on, you can visit the Excel Features Flyer site. That’s it for the month of December folks! Be sure to also check out last month’s post in case you missed it.
The technology behind headphones has evolved over the years and now users get to choose from wired vs wireless. When listening to music, you may encounter an issue where sound is not coming from your headphones. Nonetheless, there are a few factors to consider as such problems can happen to both.
This brings us to the question: Are wireless headphones really better than wired ones? Are they worth the extra money? In this article, we’ll take a look at the pros and cons of each type of headphone and decide which one is best for you.
Are wired headphones better than Bluetooth ones?
There are many factors to consider when buying a pair of headphones. But one of the most important one is the type of connection they use.
Bluetooth technology has become increasingly popular, thanks to its convenience and reliability. However, wired headphones still have their place in the market, especially for people who want more than just music.
So what makes one better than the other?
1. Battery life
The biggest advantage that wired headphones have over wireless ones is battery life. Therefore, if you’re traveling or exercising for long periods of time, it’s nice not to have to worry about your headphones dying on you.
With that said, wireless headphones are certainly better than the old wired models and are getting better every year. You may only get a few hours of continuous use from some wireless headsets, but some have quite an impressive battery life.
2. Sound quality
One of the most important factors when buying a pair of headphones is how they sound. You will want a pair that has clear bass, crisp mids and highs, and very little distortion at high volumes.
A common misconception is that Bluetooth technology always delivers high-quality sound. But it depends on a few factors: the codec (compression) used, the bitrate (data rate), and the sampling frequency (the number of times per second a digital signal is sampled).
The overall sound quality can vary from brand to brand, so it’s best to listen before making a purchase decision. Better yet, you can always incorporate headphone software to improve sound quality.
3. Durability
Most wired headphones last longer than wireless versions because there are fewer parts that can break down over time (such as batteries). Wireless headsets are more delicate and require more maintenance than wired ones.
This is because they contain batteries that must be charged regularly. Your pair is therefore at risk and could potentially break down while it’s charging or during use if you’re not careful with it on your desk.
You want to make sure that your product will last for a long time before it needs replacing or repairing because this will save you from having to spend more money in the future on another pair of headphones or earbuds.
4. Cost
The first thing that you should ask yourself is whether or not you can afford these products. If you cannot afford them, then it does not matter how good they are because you will not be able to buy them.
The cost of Bluetooth headphones is generally higher than that of wired headphones. This is because they require more functionality and technology than wired models do. However, also keep in mind that your headphones may stop working if you buy poor quality just to save on costs.
5. Comfort
Bluetooth headphones offer greater convenience than wired ones because they don’t require any cables or wires to connect them to your music player or phone — just switch them on, pair them with your device via Bluetooth and you’re good to go
Wired headphones can get tangled up easily and can be uncomfortable when they rub against your neck or face. Also, you risk damaging the cables if you easily get caught up in small accidents like falling or tripping over.
Are USB headphones better than 3.5mm audio jack ones?
The 3.5mm audio jack has been the standard for a long time, but USB-C is now taking over. If you’re looking for the best sound quality possible, then yes, you should definitely go with USB headphones.
However, keep in mind that there are many different types of headphones out there and some of them are not compatible with a USB connection. As for wireless, sometimes your Bluetooth headphones are undetectable on your device.
In conclusion, it can be difficult to find a pair of headphones that work well in every situation. The right pair will have a sound signature that matches your preferences, and they’ll also need to be comfortable enough to wear while working out or sitting at a desk all day.
Ultimately, the right pair of headphones is going to come down to your lifestyle and needs, as well as which features you value most. Whatever option you choose to go for, we have awesome recommendations for both wireless and wired headphones.