When it comes to computers, accessories and peripherals are just as important items as the main device itself. Choosing the right accessories, to be compatible with your machine and to serve your needs is essential.
With Ethernet cables, you might have noticed that they come in various numbers and colors. The Cat represents the category, while the numbers represent specifications and standards.
It can be confusing to have to choose between a Cat5 and a Cat5e cable, Cat 5e vs Cat 6, or between a Cat5 and a Cat6 cable. So keep reading to find out the difference between them and which one might be your best choice.
Is Cat5 or Cat6 better?
What are Cat5 cables?
Cat5cables provided a maximum data transmission speed of 10/100 Mbps over distances of up to 100 meters, at a maximum bandwidth of 100 Mhz. This used to be known as Fast Ethernet.
Right now, the minimum Internet speed should actually be at least 1 Gbps, so using a Cat5 cable not only slows down the speed, but it’s also less reliable.
Are Cat5 obsolete in 2022?
So Cat5 cables are now obsolete and can’t be found anymore; some older deployments still use it, although they have been replaced by Cat5e cables.
Moreover, when referring to Cat5 Ethernet cables, most people actually mean the Cat5e.
What are Cat 6 cables?
In terms of performance, Cat6 cables can support up to 10 Gbps and frequencies of up to 250 MHz. They are equipped with thicker sheaths in comparison to Cat5e, which helps increase the Internet speed.
Though standard Cat6 cables support distances of up to 100 meters, in reality, they only reach 37-55 meters (for no interference at all) when transmitting 10 Gbps speeds. Anything beyond this bandwidth will rapidly decay to only 1 Gbps, the same as Cat5e.
Additionally, Cat6 cables use a plastic core through the middle of the cable to better insulate the internal wires, which also makes it more resistant in time.
Cat 5 vs Cat 6 – Which is better?
The general opinion is that there’s no good or right Ethernet cable and that the answer depends on what are you using it for.
Generally speaking, Cat5 Ethernet cables should be OK just for your home network. A Cat5 premium cable can be just as good as any successor cable type. But, as mentioned, it is very possible that you won’t find them on the market.
On the other hand, Cat6 cables are more suitable for small businesses where there’s a demand for not just fast Internet speeds but fast internal speeds. They reduce crosstalk (interference), but they are also more expensive.
As we all know, chats in Microsoft Teams are a crucial feature because it allows users to communicate quickly and efficiently. However, many people encountered an annoying chat issue.
Microsoft Teams might not show messages as read or will show unread messages that aren’t really there. Therefore, the chat icon will appear as if you have an unread message, even if this is not the case.
The Chat group is showing a red circle with a 1 in it? I am assuming there’s an unread chat somewhere. I can’t find it and I don’t care. I want the circle to be gone. How do I do this?
So, the red circle remains, but there’s no unread chat anywhere. Today we will show you how you can fix this issue and mark all Teams messages as read.
Chats won’t mark as read in Microsoft Teams? Fix this in no time
Microsoft Teams hides chats over time if they are not used. Therefore, check out if you have hidden messages. Eventually, you can mute the conversation.
Click on the three dots.
Select Mute.
3. Log out and log back in
Log out of Microsoft Teams and log back in. This is a better solution than closing the program and/or restarting the computer.
4. Solve the issue with Alt+Tab
While you’re in the program, press Alt+Tab.
Close the badge by selecting the X in the corner of the window that pops up.
Conclusion
While this is not a serious issue, it is still annoying for many users to see that notification every time they open Microsoft Teams. Luckily, the problem can be solved in no time with our quick solutions.
All in all, the chat in Teams is great. However, Microsoft should improve the feature.
Moreover, you can’t delete conversations. So, if a notification like this still appears and you know the conversation that is causing it, you can’t delete it to solve the issue permanently.
Did you find our solutions helpful? How often do you use the chat feature in Microsoft Teams? Do let us know in the comments section below!
As if three types of Ethernet cables were not enough, electric equipment producers moved on to launch two more options, much to the confusion of many regular clients.
So now, besides Cat5E and Cat6, Cat 5 vs Cat 6 (not to mention Cat6A), we also have Cat7 and Cat8 Ethernet cables. Besides the marketing reasons that led to this evolution, for sure there’re also some safety standards involved.
What makes these last two the so-called next-generation Ethernet cables and which is the best. In this article, we will do a Cat 7 vs Cat 8 comparison, to help you choose the one that is right for you.
What’s the difference between Cat7 and Cat8 Ethernet cables?
Basically, the biggest difference between the two lies in their performance for what they were made. They differ when it comes to Ethernet speed, endurance in time, flexibility, sturdiness, etc.
What is Cat 7 used for?
The Cat7 Ethernet cables support high-speed ethernet communication of up to 10 Gbps, with a larger bandwidth than its predecessors, of 600 MHz.
They are made of twisted pairs of wire, and each pair is cover in a shield, complying with the strictest specifications for reducing crosstalk.
Cat8 Ethernet cables are also fully shielded. They bring a huge difference from the previous versions, supporting a frequency of 2 GHz, with a speed of 25 Gbps or in some cases 40 Gbps, over up to 30 meters.
They can be terminated with RJ-45 or non-RJ-45 connections, which makes them compatible with previous cable versions.
Both cables are sturdier as compared with the previous versions, which are more flexible.
This is what makes them more time-resistant when it comes to a Cat 7 vs Cat 8 comparision, with a life span of up to 15 years, according to tests.
Firefox is one of the best web browsers for all devices. However, it is not without its issues, one of them being the report from users that it uses too much memory on their Windows PC.
This affects the performance of Firefox and the other programs and processes running on the computer. This makes it all the more important to identify and eliminate the underlying cause.
So, here is all you need to know about why Firefox is using too much memory and the best solutions for it.
Why does Firefox use so much memory?
There are a few factors that can make Firefox use so much memory. Below are some of the prevalent ones:
Faulty extensions and themes: If Firefox uses excessive memory, you must first check your extensions and themes. Add-ons like DeArrow are notorious for this. While these can improve your PC’s functionality and aesthetic, they can considerably increase memory usage. The solution is to disable or remove these extensions and themes.
Outdated browser: In some cases, Firefox might take up lots of memory because your browser is outdated. In this case, the solution is to update your browser.
Disabled hardware acceleration: The hardware acceleration feature helps to maximize resource usage, especially when you are playing media. If this feature is disabled, your memory and CPU usage can increase exponentially.
How can I fix Firefox if it’s using a lot of memory?
Before making changes to your browser to fix this issue, try the following troubleshooting steps:
Restart Firefox.
Close unnecessary tabs.
Close other apps.
1. Switch to a different browser
The quickest and most hassle-free way to get back online without errors is to use a different browser.
If Firefox keeps using tons of resources, we suggest you try a lightweight alternative like Opera GX. This browser aims to load pages fast, even on lower-end PCs.
That is why it implements dedicated features like RAM and CPU limiters. YOu can easily enable them, and the browser will not bypass the limits, hence offering peak performance.
Using other apps while browsing the web can become demanding, but if you enable the bandwidth limiter feature and set how much data you want to allocate to your browser, your other apps will run faster too.
Opera GX
Open as many tabs as you want and load pages fast with this performance-oriented browser.
Click the hamburger icon on the top right corner and select Help from the menu.
Next, click on About Firefox.
A new window will now appear. Check if Firefox is up to date.
If your version is outdated, Firefox will download the latest version automatically.
After updating Firefox to the latest version, check if the Firefox is still using too much memory
3. Start Firefox in Troubleshoot Mode
Click the hamburger icon to open the Firefox menu, and select Help.
Now, click on Troubleshoot Mode here.
Finally, click on Restart in the confirmation prompt that pops up.
Firefox will now launch with extensions and other custom settings disabled, and if it works fine, you know what’s using too much memory.
So, disable extensions one by one, or revert any changes made to the browser setting and see how it behaves. Hopefully, you’ll find the problematic plugin in no time.
4. Disable themes and extensions
Launch Firefox, and press Ctrl + Shift + A to open the Add-ons and themes.
Now, click the Extension option in the left pane.
Toggle off the switch for each extension to disable it and restart your PC.
If this resolves the issue, repeat Steps 1 and 2, and click the three vertical dots before the fault extension.
Choose the Remove option.
Now, select Themes from the tabs on the left.
Click the Enable button for the System theme-auto.
After selecting the Default theme, restart Firefox, and check if it still uses a lot of memory. Many users like to customize Firefox with new themes and improve the browser’s functionality with extensions.
Although the experience can be impressive, it can later cause your browser to hog your system resources.
Launch Firefox, paste the following path in the address bar, and hit Enter:about:memory
On this page, you can view detailed reports regarding memory usage.
You can also easily free your memory by clicking the Minimize memory usage button in the Free memory section.
One of the excellent built-in features of Firefox is the memory and performance optimizer. Using the memory tool, you can reduce or stop Firefox from using a lot of memory.
6. Enable hardware acceleration
Launch Firefox, click the Menu button (three horizontal lines), and select the Settings option.
Scroll down and uncheck the box for Use recommended performance setting under the Performance section.
Now, check the box for Use hardware acceleration when available and restart your browser.
Hardware acceleration is one of the superb features on modern browsers that help with load sharing. It is especially useful when playing a media file as it transfers some load from your CPU to the GPU.
If this feature is disabled, it can strain your PC resources, including the memory. So, you need to enable it to get the best performance from your browser.
7. Reset your browser
Click the Menu button on Firefox and select the Help option.
Choose More troubleshooting information.
Now, click the Refresh Firefox… button.
Click the Refresh Firefox button again to confirm the action.
Finally, Firefox will restart and bring the list of your imported info. Click the Finish button to reset them all.
If the fixes above do not stop Firefox from using many resources, you need to reset Firefox to default. This will clear up the settings you might have made to the browser that might be causing the problem.
Firefox using too much memory is a major concern, and you should now be able to fix it by using one of our solutions listed above.
Microsoft announced that the Windows 10 free upgrade offer ended on December 31. As a quick reminder, the Redmond giant initially introduced this loophole to allow assistive technology users to upgrade Windows 7 to Windows 10 for free in 2023.
Read on to find out how to take advantage of a free upgrade right now on your PC.
Can I still upgrade to Windows 10 for free in 2023?
The short answer is Yes. Windows users can still upgrade to Windows 10 without shelling out $119. The assistive technologies upgrade page still exists and is fully functional.
In addition to the genuine copy of Windows, it’s also a good idea to have your product key available since you might need it to activate Windows 10.
Once you obtain your key, write it down and keep it safe because you might need it later. After that’s done, your next step would be to back up your files just in case anything goes wrong.
If you can, create a hard disk image and use it to restore your system in case things go south. If you want things to go smoothly, we’ve got you a list of backup software that will get the job done easily.
2. Use the Windows Media Creation Tool
After creating your backup and obtaining your product key, you can start upgrading Windows 7 to Windows 10 free of charge. This is fairly simple, and you can do that by following these steps:
Download and run Media Creation Tool. You can get this software from Microsoft’s website.
Accept the terms of service and select Upgrade this PC now option.
You’ll be asked to download the important updates. Usually, it’s advised to download them, but if you’re in a hurry you can choose Not right now
Windows will now configure your PC and get the necessary updates.
Follow the instructions on the screen until you reach the Ready to install screen. Click Change what to keep
Now you can choose between three options. We suggest using Keep personal files and apps option, but you can also select Nothing if you want to completely remove the previous Windows installation.
Now follow the instructions on the screen to complete the upgrade process.
After doing that, you should have Windows 10 up and running. To make sure that everything is in order, check if your Windows installation is activated. If not, use your Windows 7 serial number to activate it.
Alternatively, you can create an installation media and use it instead. To do that, follow these steps:
Start the Windows Media CreationTool
Select Create installation media (USB flash drive, DVD, or ISO file) for another PC and click Next.
Make sure that Use the recommended options for this PC option is selected.
If you want to manually configure language, edition, and architecture, you can uncheck it. Click Next to proceed.
Make sure that your USB flash drive is connected to your PC. Select the drive from the list and click Next.
The process will now start.
Once the process is finished, you can boot from the USB flash drive and try to install Windows again. Be sure to use your Windows 7 or 8.1 key during the installation process.
After the install, if you can’t change your product key be sure to check our guide to find some easy solutions for your problem.
Many users claim that this method works, so before you try to upgrade to Windows 10, be sure that you have a genuine copy of Windows 7 or 8.1 installed and your Windows 7 or 8.1 product key available.
Windows 10 Home
Microsoft’s best OS is what every PC owner need, so upgrade your system today!
For how long will the Windows 10 accessibility upgrade be available?
We’re pretty sure that Microsoft will support this free upgrade offer for years to come. The company made it clear that it wants as many users as possible to jump on the Windows 10 boat.
However, making them pay $119 to install the latest Windows 10OS is not the best strategy to adopt.
Here’s a catch: Microsoft initially said that the offer would expire on January 16, 2018.
If you use assistive technologies, you can upgrade to Windows 10 at no cost as Microsoft continues our efforts to improve the Windows 10 experience for people who use these technologies. Please take advantage of this offer before it expires on January 16, 2018.
But somehow nobody believes that’s true. The free upgrade offer first expired on July 29, 2016 then at the end of December 2017, then on January 16, 2018.
Of course, some said that Microsoft had been aware of this fact from the very beginning and used it as an incentive to convince more users to install the latest Windows 10 version.
So, what’s your take on this matter? Do you think Microsoft will ever end this free upgrade loophole? Let us know in the comments below.
Microsoftended mainstream Windows 7 support on January 14, 2020. Long story short, you’ve got all the reasons in the world to switch to Windows 10. However, OS upgrade processes are never easy.
We covered the upgrade topic extensively, in order to help you transition from Windows 7 to Windows 10 as smoothly as possible.
If you don’t want to update, don’t miss our guide guide on Windows 7 KB4474419 update and learn how to keep your PC safe.
We hope you managed to upgrade your Windows 7 PC to Windows 10 for free in 2023 using our guide. Let us know in the comments section below if you encountered any difficulties following it.
Usually, the Windows Driver Foundation (WDF) doesn’t use too many resources. However, Many Windows users often complain that the Windows Driver Frameworks uses too much CPU, slowing down Windows and draining the battery insanely fast. Here’s how to bring things back to normal!
How can I fix Windows Driver Foundation’s high CPU usage?
1. Perform a clean boot
Press the Windows key + R, type msconfig, and click OK.
Choose the Services tab at the top, check the box for Hide all Microsoft services, and click Disable all.
Go to the Startup tab and click Open Task Manager.
Right-click each of the apps here and choose Disable.
Go back to the System Configuration window, click Apply, and OK to save changes.
Finally, restart your PC.
Sometimes third-party applications or services can cause the Windows Driver Foundation high CPU issue. To pinpoint the cause, it’s advised to perform a clean boot.
Your PC will now start without any third-party services or applications. Now you need to check if the problem is resolved.
If so, you’ll need to enable disabled applications and services one by one until you find the one causing this issue. Remember to restart your PC to apply changes after allowing an application.
2. Reinstall your Wi-Fi driver
Before we start, download the latest Wi-Fi drivers from your device’s manufacturer.
Press the Windows key + X to open and choose Device Manager from the list.
When Device Manager opens, locate your WiFi adapter, right-click it and choose Uninstall device from the menu.
A confirmation dialog will now appear. If available, check the Remove driver software checkbox. Now click Uninstall.
According to users, sometimes problems with Windows Driver Framework and high CPU usage can occur due to your drivers. Several users reported fixing the issue simply by reinstalling their WiFi driver.
Also, if you are experiencing the Windows Driver Foundation high CPU issue with DisplayLink, you should know the driver uses the WDF process. So, choosing between the high CPU and the ability to extend your active displays would be best.
Since Windows Driver Framework is related to your drivers, we strongly suggest keeping your drivers up to date to fix this problem.
3. Run the System Maintenance troubleshooter
Press the Windows key, type control, and select the Control Panel option.
Click the dropdown before View by and select the Large icon option.
Choose the Troubleshooting option.
Now, click View all in the left pane.
Select the System Maintenance option from here and wait for the diagnosis to complete.
The System Maintenance troubleshooter helps to make your PC run optimally. For example, this can help fix the Windows Driver Foundation high CPU issue.
4. Change the Zoom video setting
Launch the Zoom app and click the Gear icon in the top right corner.
Choose Video in the left pane and click the Advanced button.
Check all the boxes under Use hardware acceleration for section.
Now, click the dropdown before for Video Rendering Method and set it to GDI.
Click the dropdown for Video Rendering Post Processing to Disable.
Finally, set the option for Video Capturing Method to Direct Show and restart Zoom to effect the changes made.
Zoom uses a feature called Media Foundation for Video Capturing Method. Unfortunately, this can use the Windows Driver Foundation process leading to high CPU usage.
Following the steps above should help normalize the process.
Memory issues are another known cause of this abnormal resource usage. Again, the Windows Memory Diagnostic tool should detect and recommend effective fixes.
Alternatively, you can use MemTest86 to detect and fix issues with your PC memory.
What causes Windows Driver Foundation’s high CPU usage?
There are a few reasons the Windows Driver Foundation registers high CPU usage when using a media player. Below are some of the potential causes to look out for:
Activities of third-party: The Windows Driver Foundation high CPU when using Teams or other apps can be caused by the third-party apps using the process. To fix this, you need to perform a clean boot. If you detect the app causing the issue, you might need to remove it with one of the best uninstaller software.
Driver issue: This high resource usage issue can also be caused by issues with your WiFi drivers. In this case, you need to reinstall or update the driver.
Zoom app features: At times, some Zoom app video features make use of the WDF processes. This can increase its resource usage. The solution here is to tweak some of these settings.
Faulty memory: Some users have found their PC memory to be the cause of this issue. You need to run the Memory Diagnostic tool to fix this.
The Windows Driver Foundation’s high CPU issue can make your PC run at unbearable temperatures. Unfortunately, this can lead to more severe problems in the future. Thankfully, this guide has everything you need to fix it effectively.
Are you facing a related issue, such as Explorer.exe high CPU usage? Then, check our detailed guide to fix it quickly.
Feel free to let us know the fix that helped you get past this issue in the comments below.
The Netio.sys blue screen of death occurs largely on Windows 10 PCs after installing new operating system upgrades. Netio.sys is a system file on your Windows computer. As a result, when it gets obsolete or corrupted due to malware attacks, it causes system crashes.
However, we have compiled practical solutions for fixing this BSOD problem. Follow along to see how you can implement them right after we see in more detail what this system file is.
What does Netio sys mean?
An essential component of a computer’s operating system is the Netio.sys file. It is connected to the software that controls a computer’s network adapters.
It is also utilized by applications not part of the network to interact with connected devices. However, it can cause the dreaded Blue Screen of Death issue when something goes wrong.
Listed below are some of the causes of the BSoD error:
Faulty or outdated drivers: The primary cause of the Netio.sys BSOD is an outdated network driver. You need to reinstall or update the driver to get past the issue.
Issues with antivirus software: Many users have found some third-party antivirus to be the cause of this issue. Removing this software with one of the best uninstaller software should do the trick here.
Broken system files: Sometimes, this problem can be caused by faulty system files. One quick way to fix this is to fix the files using one of the best repair tools.
When does the Netio.sys error occur?
On their Windows computers, many users have reported receiving a Netio.sys blue screen error. The majority of them experience this problem on a sporadic and frequent basis.
This error message can appear on the blue screen in a few different ways, including the following:
Netio.sys blue screen DRIVER_IRQL_NOT_LESS_OR_EQUAL: It is brought on by several factors, including corrupted system files, a damaged hard disk, incorrectly configured drivers, or obsolete drivers.
KMODE_EXCEPTION_NOT_HANDLED Netio.sys: An instance of the KMODE exception not handled issue appears in Windows 10 whenever two or more applications accidentally overwrite the memory of one another.
Netio.sys SYSTEM_SERVICE_EXCEPTION: Errors in the graphical user interface, corrupted system files and problems caused by either outdated or corrupt drivers result in this error message.
PAGE_FAULT_IN_NONPAGED_AREA Netio.sys: When you see this error message, also known as Error Code 0x00000050, it indicates that the system has referred to memory that is not valid.
This being said, let’s jump into the list of solutions you can implement.
How can I fix Netio.sys error?
1. Remove antivirus software
Press the Windows key + I and select the Apps option.
Select your antivirus software and click the Uninstall button.
Finally, follow the onscreen instructions to complete the removal process.
One of the major causes of the Netio.sys BSOD is interference from third-party antivirus software. To fix this, you need to remove this software and stick to Windows Defender.
Note that some antiviruses have their uninstaller program. In this case, it is advised that you use the dedicated tool to remove them.
Finally, to be sure you remove all components of any software, we recommend a general uninstaller tool in CCleaner. This excellent tool removes even the most stubborn app and ensures there are no leftovers that can cause problems in the future.
2. Update your drivers
Press the Windows key + X and select the Device Manager option.
Double-click the Network adapters option and right-click each of the drivers there.
Select the Update driver option.
Finally, select Search automatically for drivers and install any available updates.
Outdated drivers can cause a series of issues, including this Netio.sys blue screen problem. Most users have found the network drivers to be the cause of the problem. So, you should update it first.
If the Windows driver updater cannot find the latest drivers, you can visit your PC manufacturer’s website to download and install them. Also, you can check for the latest versions of your chipset drivers and BIOS.
Alternatively, you can update all your drivers automatically using a specialized tool in Fortect Driver Updater. This takes out the guesswork and fixes any driver-related issue for good.
Click on the Start icon, type cmd, and select Run as administrator under Command Prompt.
Now, type or paste the following command and press Enter: sfc /scannow
Finally, wait for the command to finish running.
Corrupt system files can also be the cause of the Netio.sys blue screen issue. This System File Checker utility program verifies the integrity of all system files and repairs files with problems when possible.
Alternatively, you can fix these corrupt system files using a dedicated tool to prevent more errors from occurring.
4. Perform a System restore
Press the Windows key, type system restore, and select Create a restore point.
Click the System Restore… button.
Now, click the Next button.
From here, select a restore point and click the Next button.
Finally, click the Finish button to complete the process.
System Restore is a Windows feature that enables you to reinstate your system to a previous state and fix any recent problems. This should help you return your PC to a time before you started experiencing the Netio.sys blue screen issue.
These are the ways in which you can fix the Netio.sys error on your PC. If you need further help, check out our post on the 5 best BSoD fixers to repair Blue Screen errors effortlessly.
In the beginning, Twitch used to be based around the gaming industry, allowing gamers to live stream their gameplay. Meanwhile, the platform developed the IRL streaming section and expanded to eSport competition broadcasts.
Unfortunately, from time to time, Twitch is affected by various errors. The Error 4000: Resource format not supported is known to disable audio while streaming.
What causes Twitch error 4000?
Users have identified a few common triggers for this error. On the top of the list are the following:
Browser extensions – Twitch error 4000 might be triggered by incompatible browser extensions. You should ensure you do not have conflicting extensions.
Cookies – Users have reported that third-party cookies may also factor in this error.
App settings – This issue may also appear due to incorrect app settings or temporary bugs.
Users have also encountered the following:
1000 – The Twitch error 1000 is pretty standard, as many users reported. Before discovering what you can do to fix it, remember that it might appear while downloading specific videos.
2000 – This one indicates network-related issues, and it seems like it can come in different forms. To discover more about it, verify our Twitch error 2000 article.
3000 – If it ever happens to face this issue, your browser will encounter an error while decoding the video. We suggest checking our specialized guide to solve the Twitch error code 3000.
5000 – The most common reasons this code can occur are the cached data and extensions. Fortunately, several methods would fix the Twitch error 5000 in less than a few minutes.
Fortunately, we’ve compiled some valuable solutions to all these problems. To get rid of the Twitch error 4000, follow the instructions listed below one by one to see which works for your case.
Quick Tip:
Opera GX automatically blocks cookies and other trackers, which translates into faster browsing speeds. This is great if you spend a lot of time streaming online content on Twitch.
More than that, Opera GX has abuilt-in Twitch on the sidebar to keep up with all the live streams you’re interested in.
Opera GX
Forget about video format errors on Twitch and navigate smoothly on this gaming browser.
Click the Settings icon in the bottom right corner of the stream (it is marked as a gear).
Select the Popout Player option.
2. Close other active media players
Open Task Manager by holding Ctrl + Shift + Esc.
Select each media player process running, and click End process.
Close the Task Manager and try reloading the stream to see if it works.
3. Remove audio hardware
Additional audio hardware connected to your PC could stop the stream from loading. Hardware such as headphones or external speakers could be interfering with Twitch.
Remove the hardware from your PC and try loading the stream again. You can plug your audio hardware back in if the error goes away.
Tap the Windows key, type Firefox, and open the first result to access the browser.
Tap the hamburger menu icon from the top right corner and navigate to History.
Click on Clear Recent History.
Under the Time range dropdown menu, select Everything.
Select all the data from the History and Data sections. We recommend that you leave Active logins out. Then click OK to start the deleting process.
5.2 Clear browsing data and history in Opera GX
Open Opera GX by pressing Windows and typing its name inside the search bar.
Next, click on the menu icon from the top right corner and select Go to full browser settings.
Next, click Advanced followed by Privacy & security and Clear browsing data.
Select All time under the time range.
Select the Cookies and other site data and Cached images and file options, then click on Clear data.
5.3 Clear browsing data and history in Chrome
Press the Windows key and type Chrome to access it.
Use the following keyboard shortcut to open the Clear browsing data menu:Shift + Ctrl + Delete, then choose All time under the time range.
Check the Cookies other site data, and Cached images and files options.
Tap Clear Data. The Twitch error 4000 Chrome issue will be fixed.
5.4 Clear browsing data and history in Chromium
Open Chromium by pressing Windows and typing its name inside the search bar.
Next, click on the menu icon from the top right corner, followed by Settings.
Here, click on Privacy and security from the left menu.
Select Clear browsing data.
Select All time under the time range, followed by the Cookies and other site data and Cached imagesand files options.
And lastly, click on Clear data.
We hope you can find a fix for this Twitch error 4000 from our list of steps. As you can see, they are simple to follow, so you don’t have to be an expert to fix this annoying issue.
If you know any other methods of fixing the error code 4000, feel free to share them with us in the comments section below.
Ethernet splitters can come in handy, especially when you are looking for ways to connect more than one device to the Internet.
There is a chance though that the internet speed slows down if you are having more machines hooked up to a single switch.
In order to prevent encountering this kind of situation, we’ve compiled a list of the best Ethernet splitters that will make sure that your internet connectivity remains strong no matter what you’re doing: whether you’re working, gaming, or simply browsing the internet.
NETGEAR 5-Port is yet another great ethernet splitter that comes with nice addition that will make you feel great with this choice.
First, it’s extremely easy to use as there are is no need to install any software or make any configurations.
Thanks to the intelligent design and components, it makes no sound while working which means that it’s a perfect Ethernet splitter for noise-sensitive environments.
GizmoVine Ethernet Splitter has enlarged usability since it is compatible with cat5/cat5e/cat6/cat6e/cat7 network environments.
This ethernet splitter does a great job at dividing the network cable into two outputs which will provide Internet simultaneously, in case you also have a pair of network cable splitter.
Thanks to the external EML/PFL, you can rest assured that any damage will be prevented as well as other electromagnetic interferences.
Aumox 5 Port Gigabit features 5 auto-negotiating gigabit ports, which will expand your network capacity. Not to say that this will also allow for instant transfer of large data files.
Also, thanks to the steel housing, the Aumox switch will not make sounds while working and won’t generate extra heat.
It’s a durable ethernet splitter, with fantastic durability and the best choice for SOHO network as you’ll be able to economically increase the network connectivity.
TP-Link 8 is the last product from our list and a good one nonetheless. It comes with some really nice features such as the option to prioritize your traffic while guarantying high-quality traffic.
It also comes with the latest innovative technology that will expand your network capacity while saving power.
The set up is fairly simple, there is no software installation needed or any other configurations for that matter.
With this, we conclude our list of best Ethernet cable splitters that you can use.
We hope that we have offered you all the needed informations and guidelines in order to make up your mind about which is the best Ethernet splitter for you.
You’ve been waiting all day for your favorite NFL game or TV show, and when you try to get it going on your Xbox console, the CBS Sports app is not working. This is one of the most annoying user experiences ever.
But still, it’s a very common situation among CBS Sports users. Luckily enough, there are a few things that you can try to fix the situation quickly before contacting CBS’s Help Center.
How do I fix CBS Sports app not working on my Xbox?
1. Restart the console
1. Press the Xbox button to open the guide. 2. Select Settings. 3. Select Restart console > Yes.
If the console appears to be frozen, press and hold the Xbox button for about 10 seconds to turn off the console. Then, press the Xbox button again to restart.
2. Power cycle the console
Press the Xbox button for approximately 10 seconds to turn off the console.
Unplug the console from the power source and wait for a few minutes.
Plug the console back in and restart it.
3. Restart the app
In the home screen, highlight the app with the controller.
Press the Menu button > Quit (if unavailable, the app is not running).
Restart the app from My games & apps.
4. Uninstall/reinstall the app
In the Home screen>My games & apps.
Highlight the CBS All Access app.
Press theMenubuttonon your controller >Uninstall.
Re-install the app from Store > Apps > Get it Free.
5. Update Xbox
Tap the Xbox button on your controller.
Press RB three times.
Select Settings.
Open the System tab.
Click Updates & downloads and see if any updates are available.
Aside from the app not working, you may also encounter another CBS 465 error where your app is restricted in some areas.
All of the above solutions proved successful in one situation or another, but if you have other tips, please level them in the comments section below.
Some users have said Avira is not opening in Windows 10, and this can be a problem, especially since this is a perfect antivirus for low-end PCs.
However, there are ways to fix this problem, and in today’s guide, we’ll show you how to do it.
Why is Avira not opening?
There are several reasons for this, but the most common ones are the following:
Lack of privileges – In order to get Avira to work, you might need administrative privileges. Alternatively, you can run applications as administrator.
Required services aren’t running – Avira software requires its services to run before it can start. So open services.msc and start the necessary services to fix the problem.
Corrupted installation – Sometimes your software can be damaged. If that’s the case, you need to repair or reinstall it.
What can I do if Avira is not opening in Windows 10?
1. Reinstall Avira software
Press Windows key + X. Next, select Apps and Features.
Select Avira on the list and click on Uninstall.
Follow the instructions on the screen to remove it.
To repair an Avira Security installation, click Settings on Windows 10’s Start menu.
Click Apps to open Apps & features.
Select Avira Security in apps.
After that, press the Modify button to open an Avira installer window.
Then click the Repair option in that window.
Avira Antivirus
Press the Windows key and R simultaneously to open the Run accessory for opening software.
Next, type the following command within Run’s text box: appwiz.cpl
Select your Avast Antivirus software and click the Change button.
Select the Modify option, and click the Next button.
Press the Next button again to install all listed components.
Thereafter, restart Windows after you’ve repaired Avira Antivirus.
4. Start Avira Service Host
Open Search and type services in the search text box. Next, click on Services.
Then right-click Avira Service Host within the Services window to select Start.
After the service starts, check if the problem is resolved.
These are simple steps, and they should help you if Avira is not opening on Windows 10. This isn’t the only issue, and if you having Avira Antivirus error 500, be sure to check our dedicated guide to see how to fix it.
What solution did you use to fix this issue? Let us know in the comments section.
If you are a system admin and work with Microsoft Hyper-V virtual machine, you may want to know how to add a network adapter to a Hyper-V virtual machine.
The latest version of Windows Hyper-2016 added the functionality that allows you to add or remove virtual network adapters to/from running virtual machines.
If you are new to the Windows Hyper-V virtual machine world, there are a lot of things to learn. However, knowing how to add a network adapter to the Virtual machine is an essential part of running the VMs successfully.
In this article, we show you how to add a network adapter to Windows 10 Hyper-V virtual machines. There are two ways to achieve this, and we have listed both the methods in this article.
How do I add a network adapter in Hyper-V?
1. Add a Virtual Network Adapter from Hyper-V Manager
LaunchHyper-V Manager on your Windows machine.
First, you need to make sure that you have a network adapter added to your Virtual Switch manager.
To do this, click on the Virtual Switch Manager from the right pane in Hyper V-Manager.
In the new window, from the left pane check if you have Virtual Network Card. You should see something like the New Virtual Switch.
Click Cancel.
In the Hyper V-Manager, right-click on the Virtual Machine and select Settings.
Under the “Add Hardware” section, select Network Adapter.
Click the Add button.
It will show you the Network Adapter window.
Under “Virtual Switch“, click the drop-down menu and select “New Virtual Switch“.
Click on Apply to save the changes. Click OK.
If you have multiple Virtual Machine, you can add the same new virtual switch to other virtual machines as well.
The Hyper-V is capable of sharing network resources with multiple VMs as long as you are running a Cat 5/6 cable on a Gigabit switch to reduce latency.
2. Add network adapter to Windows 10 Hyper-V using PowerShell
If you don’t want to use the Hyper-V Manager or prefer your PowerShell do the talking, you can use PowerShell to add a network adapter to Windows 10 Hyper-V virtual machine.
Right-click on Start and select Windows PowerShell (admin).
In the PowerShell terminal, type the following command and hit enter. Add-VMNetworkAdapter-VMNamesvwdsg2-12r2-SwitchNamevSwitch-NameHotAdded-DeviceNamingOn
Wait for the command to execute and that’s it. You have successfully added a virtual network adapter in Hyper-V.
The above command should work on configuration version 6.2 and above.
In case you want to remove the virtual network adapter, you can use the following PowerShell command: Remove-VMNetworkAdapter -VMName svwdsg2-12r2 -Name HotAdded
The above command will remove all the network adapters that match the name unless you specify the name of the adapter to be removed.
To overcome this problem, you can either use filters or use the Hyper-V Manager to remove the adapter:
In the Hyper-V Manager, right-click on your virtual machine and select Settings.
From the left pane, click on Network Adapter and then click the Remove button.
Click Apply to save the changes.
We hope you managed to add a network adapter in Hyper V using our guide. Also, once have it up and running, find out how to setup USB passthrough in Hyper-V, a critical functionality that’s not present by default.
Let us know how it went in the comments section below.
“We get the message that says: ‘You cannot play online multiplayer through Xbox live because of how your account is set up.” So what next?”
This is one of the many concerns that Xbox users have raised, and it can be both annoying and frustrating especially when everything was working before, and now it isn’t.
If you’re getting the same message, it is likely that your privacy and online safety settings on your Xbox One console are causing the issue.
In this case, you need to check the following first before you try any of the solutions listed below:
Check that you’re logged in to the console via an adult account, because children and teenagers are not allowed to make any changes to their own privacy and online safety settings.
SOLVED: Xbox won’t let you play online
1. Check for any alerts on Xbox Live status
Go to your Xbox Live service and check for any alerts in the status, then wait until it says ‘up and running’ before trying again. This could save you from other troubleshooting steps for errors like code 1017 on Battlefront 2.
2. Change your privacy and online safety settings
If you have any issues in managing your privacy and online safety settings on your Xbox One console, sign in to your Microsoft account, then click Xbox One Online Safety and review your settings online.
3. Add/Remove passkey
You can use a passkey to sign in, so if you have not set the Sign-In, security & passkey settings to require a passkey before changing settings, you can enter your passkey to do so. If you forgot your passkey, remove the current one. Usually, Microsoft prompts you for an account password after you fail to key in the correct one three times. Enter your password then remove the passkey you forgot.
Note: to create a new passkey, select create a new passkey and follow the instructions to get started. Without a passkey, you’ll have to enter your password in case your settings still require a passkey. Change the setting to stop getting the prompts.
Change Everything to ‘Everyone’ and ‘Allow’ in the checkboxes on the Privacy Tab
Go to the Xbox 360 Online Safety tab at the top
Change every checkbox to ‘Allow’
Click Save
Reload your game or close then reopen it and try to play again
5. Turn off Power Saving mode
Some users have reported that there’s an issue where using a Power Saving mode on your phone or tablet prevents Xbox app from running in the background, and this is needed to sign you in the correct way. To fix this, try the following:
Turn off any power saving mode on your device
Ensure your Internet connection is working and is reliable/stable
Force close the game app
Open Xbox app and sign in to your Xbox Live account
Start your game app and wait for it to sign in. You can also choose settings> sign in
6. Adjust Family settings
If you’re still experiencing problems, adjust the settings for your family. To do this:
Go to Xbox Live settings page
Check that you and your family members are there
Choose the account you want to change
Go through and check that the relevant boxes are selected. Check all three columns: Privacy, Xbox One Online Safety, and Xbox 360 Online Safety, with specific attention to ‘Join multiplayer games’ settings
7. Allow ‘Accept Friend Requests’ and ‘Online Gameplay’
Go to account.xbox.com website. Log in under your account
Go to “privacy & online safety” page
On the page you should see your profile and your child(s)
Click on the child profile pic, it should be green now
Click the “Xbox One Online Safety” tab
Allow everything but “buy and download”
Click save at the bottom
Click the “Xbox 360 Online Safety” tab.
Allow the first 2 “Accept Friend Requests” and “Online Gameplay”
Ensure that you save the settings
Did any of these solutions help? Let us know in the comments section below.
Hardware devices and peripherals designed to help your Windows 7 PC connect to the web could not function properly without Ethernet controller driver devices.
In our article today, we will be presenting you our top picks for the best Network adapters for Windows 7 available to buy right now on Amazon.
There is a wide selection of Ethernet controllers, and each one of them uses different chipsets and manufacturers, henceforth why the drivers are different from one product to another.
Therefore, when you search for the latest drivers, you’ll need to know the product’s name, and look for the specific driver made for that said product.
What are the best Windows 7 Ethernet controller devices?
As with any other TP-Link product, the TP-Link TG 3468 is one great device which provides a stable and smooth connection. It is easy to install and supports high internet speeds.
You can go about installing the drivers on this device in two ways. You either use the CD and let the product install the default firmware driver, or you download the latest one yourself.
Simply go to the Realtek official site, and search for the RTL8168 chipset driver in the downloads section. You will find the latest available version of this network adapter for Windows 7 right there.
Fits any PCI Express x1, x2, x4, x8, or x16 socket
Provides simple connection to a Gigabit Ethernet network, and is fully compatible with 802. 1Q virtual LAN (VLAN) tag
Suitable for any server or workstation, supporting high-Performance Dual-channel networking and maximum data transfer speeds of 1000Mbps in each direction
The prongs don’t align properly with the PCIE socket on some PC cases
Yet another powerful Ethernet network card that works with high internet speeds, the EDUP Gigabit Ethernet is perfect for those who are limited by their on-board card.
As with any other such product, it doesn’t require any installation. You simply plug it in the PCI slot and it should start working. Your OS will download the drivers after you turn the PC on.
However, if you really wish to install the latest drivers manually, you’ll find them on EDUP’s official website. Download the EP-9602GS Driver (that’s the name of the chipset) and install it.
The Rosewill Ethernet network adapter card will greatly improve your internet download speed compared to the on-board adapter that comes with your motherboard.
Naturally, the card is ready to go after you plug it in, and the installation process is pretty easy. You PC will also install the driver by itself.
As it’s the case with the other network adapter cards, if you really wish to install the latest driver manually, you’ll have to go to the manufacturer’s website, in this case, Rosewill’s official site.
This card provides a simple connection to the Gigabit internet, which will ensure you won’t get random disconnects or other internet-related issues.
Oviously, it is more potent than a normal on-board network adapter cards, reaching higher speeds then the ones you’ll normally find incorcporated into motherboards.
As for the drivers, StarTech has got you covered. Go to their official website, navigate to Find Drivers, enter your product ID and you’re good to go. Download the latest driver and enjoy your brand new card.
A computer or laptop’s Ethernet controller allows it to connect to the internet via an ethernet cable. The internet speeds provided by these cables surpass those of normal wireless connections.
These controllers also have different speed capabilities, and most of them are incorporated into the motherboard by the manufacturer.
Specialized Ethernet adapter cards can be bought separately and inserted into the PCI slot, alongside the motherboard. They are usually faster than those in-built ones and provide a better connection
Why do I need a Windows 7 network adapter?
Ethernet controller drivers serve as the manual that the PC uses as a guide to instructing your Ethernet hardware on how to behave in various circumstances.
That means your PC depends on those instructions to the hardware devices through these drivers loaded in the hard disk.
Without these driver tools, your PC won’t recognize a hardware device you attach to the motherboard. Simply put, drivers are as equally important as the hardware itself.
How do I install an Ethernet controller?
Installing them is quite easy. You just have to open up your PC case, remove one PCI slot and just plug the adapter into the respective slot.
It is as simple as that. We do have to mention that some network adapters come with a CD that contains drivers for the product, and some rely on your Windows to automatically search and install them.
Either way, it is safe to say that you can manually install the latest drivers by going to the manufacturer’s website and searching for them.
That’s about it for this article. There are many ethernet adapters out there, and each one of them has special drivers made them.
That being said, we do hope that our products and the information you’ll find here will help you. Feel free to tell us about your experience and which was the best Network adapter for Windows 7 PCs from the list for you.
The Microsoft Store comes in handy when you want to update an app and continue using it seamlessly. However, users are now reporting that the error code 0x80070483 is appearing on their screens.
As such, they can’t access the store and are locked out. This can be frustrating, especially because some apps won’t function until updated. If you’re in the same boat, this article may be of help.
Why am I getting the error code 0x80070483 in Microsoft Store?
The error code 0x80070483 is occasioned by some of the following reasons:
Virus infection – If you don’t have a comprehensive antivirus to secure your system, malware can easily find its way to your device.
Microsoft Store cache – If you have been downloading and installing a significant number of apps, there’s a probability that there’s too much Microsoft Store cached.
Conflicting apps – If you have another similar app installed on your PC, it may be causing conflicts with the Microsoft Store and present some errors.
Microsoft Store is blocked – In some peculiar situations, you may find out that the Microsoft Store is blocked on your Windows 11 so ensure that you check for such anomalies.
Missing system files – Editing the registry can help solve some issues, but if you don’t know what you are doing, you can end up with more problems.
How do I fix error 0x80070483?
A few preliminary checks to perform before moving to the slightly technical troubleshooting include:
Close any background programs and apps that may be interfering with the Microsoft Store.
Hit the Windows key, type cmd, and hit Run as administrator.
Type the following commands and press Enter after each one: DISM /Online /Cleanup-Image /RestoreHealthsfc /scannow
The manual process can be very helpful, but sometimes you also rely on specialized repair software to scan your PC for corrupt or missing files and find the best replacements for them in no time.
5. Reinstall the Microsoft Store
Press Windows + I keys simultaneously to open Settings.
Type Powershell in the search bar and click Run as administrator.
Type the following command: Get-AppxPackage -allusers Microsoft.WindowsStore | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register "$($_.InstallLocation)\AppXManifest.xml"}
Press Enter to execute the command.
Microsoft Store is now reinstalled on your computer.
The 0x80070483 error code is just one of the many Microsoft Store error codes that you may encounter so check out our comprehensive guide on the other errors for available fixes.
Windows won’t boot on second hard drive? We’ll show you how to fix it. This might happen due to incorrect BIOS settings, a faulty SATA connection, or a corrupted boot sector on the second drive.
With tricks such as adjusting boot priority in BIOS, checking cable connections, or repairing the bootloader using Command Prompt, you can get your PC to recognize and boot properly from the second hard drive.
Here’s what you should do:
What can I do if a new hard drive won’t boot on Windows 10/11?
1. Set the boot disk at the top of the computer’s boot order in BIOS
Power up your computer.
Press the F1 key or any specified key to enter the BIOS (other keys such as F1, F12, or Delete may be used depending on your HP system).
Locate your computer’s boot order under BIOS Boot.
Select the HDD/SSD i.e. the boot disk and move it upward using the arrow key.
Save the changes by following the screen prompts and exit the BIOS.
One of the reasons for this problem is that the HDD/ boot disk is not at the top of the boot order. The system retrieves boot information and OS details by following a boot order.
The boot order consists of the sequence of sources that the computer searches in order to retrieve valid information.
Meanwhile, BIOS enables you to specify a drive by its position in the hard-drive list as below (eg HDD-1, HDD-2, etc.) make sure that your original drive is on the SATA0 data cable, and the new one is on the SATA1. Hence, the system will try to read off the SATA0 drive first.
However, if the HDD/boot disk is not at the top of the boot order, the computer tries to boot from another source which results in the error message.
If you intend to set the boot disk i.e. HDD at the top of the boot order in BIOS (Basic Input/Output System), follow the above steps.
If you want to keep your system running smoothly, you can get a dedicated Windows optimizer software. They typically include cleaner utilities, as well as disk management tools that are more user-friendly than the BIOS.
Power off your computer and remove the battery. Open up your computer’s casing afterward.
Detach the HDD from your computer.
Clean all the ports and wirings linking the HDD to the computer and also check the SATA and power cables.
Replace the faulty cables you detect and fix loose connections.
Now, reconnect the HDD to the computer. (Ensure that all the connections are fastened tightly.
Hence, attach the battery and power up your computer.
Power down your PC and inspect the SATA and power cables. Re-seat them or replace faulty ones. A loose or damaged connection could prevent the system from recognizing the drive, especially after a Windows 11 update that caused a missing hard drive.
In order to check the PC/HDD wire connections, you need to use a screwdriver. Follow the above steps to check the connections and fix the problem.
However, if you do not have the tools and required practical knowledge involved in using this method; it is advisable that you consult a computer technician or computer engineer to help you out.
3. Update the IDE drivers
Press Windows key + X and select Device Manager from the list.
When Device Manager opens, locate the IDE controllers section, right-click on the drivers, and choose Update driver.
Click on Search automatically for drivers.
If a newer driver will be found, it will be installed. Repeat the process if you have more devices or drivers.
Restart your PC and check if the machine is booting from the second drive.
Sometimes the only way to fix this problem is simply to visit your laptop manufacturer’s website and download the latest drivers’ drivers for your laptop. After downloading the latest drivers, uninstall your current one by following these steps:
However, updating drivers manually could be very stressful and time-consuming. You can always opt to execute all processes through third-party software like Fortect Driver Updater.
This program not only will show you the right driver version for your device but will also prevent PC damage.
Insert Windows bootable installation DVD and restart your PC.
Press any key to boot from CD or DVD when prompted to continue.
Select your language preferences, and click Next.
Click Repair your computer in the bottom-left.
In the Choose an option screen, Click Troubleshoot > Click Advanced option > Automatic Repair or Startup Repair. Then, wait for the Windows Automatic/Startup Repairs to be complete.
Restart your PC and boot to Windows. Attach the second hard drive afterward.
You can also fix the boot error problem by performing automatic repair/start repair on your system by using the Windows bootable installation DVD. This fixes boot-related issues such as corrupted boot sectors, especially when Windows 11 won’t recognize your external hard drive.
Finally, you need to consider replacing your PC’s HDD because it may be faulty. You can remove your HDD, connect it to another PC to access the files and folders on the PC, and also confirm if it boots up from the HDD.
Meanwhile, if the new PC is unable to identify and access the HDD, then you definitely need to replace it with a new one.
However, if the PC can detect and access the HDD, then the probable cause for the error problem is the faulty SATA cable.
The SATA cable connects the HDD to its motherboard; we highly recommended that you replace it with a new one. You can carry out the replacement with a professional computer engineer.
No less important, keep in mind that the above solutions are recommended whenever experiencing these issues as well:
External hard drive prevents booting – Booting issues, while an external hard drive is present, are nothing out of the ordinary. You may reset your UEFI setting back to default or apply the above tips.
Computer won’t boot with the external hard drive plugged in – If that’s a problem you can’t get rid of, running Automatic Repair/Start Repair or reformatting the external drive may help.
Feel free to comment below if you have any questions concerning the solutions we mentioned above.
Some Excel users link their spreadsheets with reference links. A value in one Excel file will then be linked to another. Users can usually remove those reference links with the Edit Links dialog, which includes a Break Link option.
However, sometimes users encounter an error where the excel function to break links is not working. If you can’t break all reference links in an Excel file, check out some of the resolutions below.
How to fix the Excel function break links is not working?
1. Unprotect the Excel worksheet
Select Excel’s Review tab.
Click the Unprotect Sheet button.
If the sheet protection has a password, you’ll need to enter that password in the dialog window that opens.
Click the OK button.
Then the Break Link option might not be greyed out. Select the Data tab.
Click the Edit Links option.
Select the links listed, and click the Break Link option.
2. Delete named cell ranges
Click the Formulas tab.
Press the Name Manager button.
Select a cell range name there.
Press the Delete button to erase it.
Click the OK option to confirm.
Delete all the referenced cell range names listed within the Name Manager.
Click the Close button.
3. Clear all data validation rules from the sheet
Click the Select All button at the top left of a worksheet.
Select the Data tab.
Then click the Data Validation button.
Select the Data Validation option.
A dialog box should then open that asks to clear all.
Press the OK button on that window.
Repeat the above steps for other sheet tabs in the spreadsheet.
The Break Link Tool is an Excel add-in with which you can quickly remove all reference links from an Excel worksheet. The add-in is not freely available, but you can still try out the add-in with a one-week free trial.
With that add-in installed, you’ll see a Break Links button on the Home tab. Click that button to open the tool’s window. Then you can click a Select all option to select all the tool’s break link settings. Pressing the Start button will remove all the links.
So, that’s how you can break links in your sheet when you can’t get rid of them with the Edit Links tool. Note that spreadsheet objects and pivot tables might also include referral links.
So, also check if any objects and pivot tables on sheets have any reference links.
Which one of these methods worked out for you? Let us know by leaving a message in the comments section below.
Live Photos contain two features you can use your camera for taking pictures and making videos. However, users have been asking how to convert Live Photo to still on Windows to save their space.
Live Photo is one of the best features of the iPhone camera, and it’s because of the composition of both photo and video in a single frame. However, many users have been curious whether they can save Live Photos from iPhones to PCs for various reasons.
Yes, you can save Live Photos from iPhone to PC via several procedures. Also, backing up Live Photos on your PC can be beneficial. It can help free up disk space on your iPhone because Live Photos are way bigger than still pictures.
Also, saving Live Photos on your PC allows you to convert them to still photos without screenshotting the picture. This helps retain the quality of Live Photos.
How do I convert a Live Photo to still on Windows PC?
Before proceeding with any steps for converting your Live Photo, apply the following:
Go to Photos to open your iPhone gallery, click on Live and select the Live Photo you want to transfer for converting.
Click the Download button in the top right corner to download the Live Photo on your PC.
Downloading via iCloud will save both JPEG and MOV files on your PC. Here, you can extract the JPEG format, which can serve as the still photo and the MOV file that is the video.
Connect your iPhone to your PC. and click on Start beside CopyTrans Photo.
Navigate through your photos on the left pane of the screen, then drag the Live Photo to the iPhone tab.
Click the Apply changes button in the top-left corner to convert the Live Photo to JPG.
CopyTrans Photo is a software that allows users to transfer photos and videos from iPhone to a Windows PC. Also, you can convert HEIC to JPEG and back up your iOS photos to your PC.
Afterward, the converted JPG picture will be saved in a folder on your PC. Hence, you can access it anytime you want.
Seeing a CPU fan error on boot can be alarming, especially when your PC won’t load past the BIOS screen. Common messages include CPU fan error detected, please check, or press F1 to continue, usually on ASUS motherboards. These alerts appear when your system doesn’t detect the CPU fan or its RPM is too low.
Here’s how to fix the issue safely without diving deep into BIOS tweaks or replacing hardware.
An error that occurs at startup caused by the central processing unit (CPU) fan is frequently the result of physical damage to the fan itself, faulty settings, or external circumstances that cause the computer to overheat and force the fan to spin at speeds that are exceptionally high.
Alternatively, errors with the computer’s central processing unit (CPU) fan might be brought on by dirt or other debris that obstructs the device’s air vents.
How do I fix CPU fan speed error?
Before moving on to more complex solutions, make sure to do the following:
Remove the fan and clean the dust. You can use pressurized air to clean it.
If you installed an AIO liquid CPU cooler, check to see that the Pump was plugged into the AIO PUMP port and that the AIO Radiator Fans were plugged into the CPU FAN port.
Check to see that the CPU cooler is correctly attached to the motherboard and that the fan of the CPU cooler is specifically hooked into the CPU FAN header.
To reduce the CPU temperatures, re-apply the thermal paste.
Disable overclocking and custom fan curves
Move your PC to get adequate ventilation
1. Update BIOS
It’s more likely to work out CPU fan error on boot by accessing your BIOS and update the firmware of your Windows PC.
1. Download the newest BIOS version from your motherboard manufacturer’s website and copy it onto an USB flash drive.
2. Open the Start Menu then click the Power button. Hold the Shift key and choose the Restart option.
3. You should see several options available. Choose Troubleshootfollowed by Advanced options.
4. Select UEFI Firmware Settings.
5. Click the Restart button and your computer should now boot to BIOS.
6. Once you enter BIOS, look for theBIOS updateoption and select it.
7. Now you need to choose the BIOS update file from your USB flash drive and wait while your BIOS updates.
For more details about your computer’s BIOS, check out our dedicated guide on how to check the BIOS and update it.
2. Lower the default fan RPM in BIOS
To fix the CPU fan speed error detected boot into BIOS on your PC.
Navigate to CPU Fan settings. The sections might differ based on your motherboards. The important thing is to look for anything related to the CPU Fan control, usually found in the Advanced settings menu. Now, locate the setting that regulates RPM warnings. The default value should be around 600 RPM (rotations per minute).
Lower the default value to 300 RPM and save changes.
Exit BIOS and boot into the system. This is one of the best solutions for the Asus motherboard CPU fan error.
3. Disable CPU Fan speed monitoring in BIOS
Boot into BIOS. Navigate to the aforementioned Advanced settings.
Look for the Monitoring (Monitor) section.
Change the CPU Fan Speed to Ignore and confirm changes.
Boot into Windows and look for improvements.
After that, the CPU fan press F1 error should be gone. However, if the issue persists, take your PC for diagnostics and repair.
4. Try another CPU fan header
In some cases, your PC might have more than one CPU fan header. If you face the CPU fan error, it might be because the header you are using is faulty.
The best thing to do in this case is to try another header. Also, ensure the fan is connected to the correct location (i.e., the fan header).
Sometimes, you need to verify if your CPU fan is working well. To do this, you need to try other fans compatible with your PC.
Just make sure you connect it to the header and that the area is well-ventilated.
6. Replace the CPU fan
If the fixes above fail to solve the CPU fan error, you might need to go for broke and replace the fan. This is especially true if you tested your PC with other fans, and they worked without error.
The only thing you need to take care of is the compatibility of the fan with your PC and that you get the connection right.
7. Shut Down and Check the CPU Fan Connection
Make sure the fan is connected to the correct motherboard header. Many users mistakenly plug it into a chassis fan port instead of the CPU_FAN port.
Steps:
Power off your computer and unplug it.
Open the side panel of your case.
Locate the CPU fan cable and ensure it’s firmly plugged into the CPU_FAN header.
Plug everything back in and restart the PC.
This is the most common cause of the CPU fan error ASUS motherboard message.
8. Clean the CPU Fan and Heatsink
Dust buildup can prevent your fan from spinning correctly or reduce its RPM enough to trigger the CPU fan speed error detected warning.
Steps:
Power off and unplug your PC.
Use a can of compressed air to clean the CPU fan blades and heatsink.
Make sure no cables or wires are obstructing the fan’s path.
Reboot and check if the error persists.
9. Reset the BIOS via CMOS
If you see CPU fan error press F1, there might be a BIOS glitch or misconfiguration. Performing a CMOS reset will restore BIOS defaults.
Steps:
Turn off the PC and unplug all power sources.
Remove the CMOS battery from the motherboard for about 30–60 seconds.
Press and hold the power button for 15 seconds to discharge residual power.
Reinsert the battery, power the system back on, and check if the error is gone.
10. Use a Fan Monitoring Tool
To make sure the CPU fan is spinning properly, install a hardware monitoring tool in Windows. This can help verify RPM levels and fan detection.
Recommended tools:
HWiNFO – Offers detailed readings on CPU, motherboard, and fan RPMs.
AIDA64 Extreme – Useful for diagnosing fan detection issues or low RPM behavior.
If your fan shows “0 RPM,” it’s either disconnected, faulty, or not spinning fast enough for BIOS to detect.
11. Reseat the CPU Cooler
Improper mounting can cause the cooler to sit unevenly, which may stop the fan or reduce performance. If nothing else works, this step is worth trying.
Steps:
Shut down the PC and unplug everything.
Remove the CPU cooler carefully.
Clean off the old thermal paste with isopropyl alcohol.
Apply a small amount of new thermal paste to the CPU.
Reseat the cooler firmly and reconnect the fan to the CPU_FAN header.
What will happen if the CPU fan fails?
Central processing units that have dead fans will overheat. When a computer’s central processing unit (CPU) gets too hot, there are normally built-in safeguards that will either shut it down or slow it down to prevent it from exploding.
However, suppose the computer protections fail or don’t kick in quickly enough. In that case, the central processing unit (CPU) could reach temperatures above its maximum operating temperature and burn out.
Alternatively, you can replace the cooler, which isn’t a complex task. Did our article help you with the Asus water-cooling CPU fan error? Let us know by leaving a comment in the section below.
If you have been experiencing avpui.exe application error on your Windows 10 PC after installing Kaspersky Antivirus, we have come up with the right fix.
This app error has done the rounds, and many users have encountered it. However, before we dive into some practical solutions, let us explore some of the more common causes of the error.
What causes avpui.exe error?
The avpui.exe application error occurs most especially during Windows startup with error messages such as Avpui.exe not found or Avpui.exe is not running.
This error is associated with Kaspersky Antivirus program, one of the best antivirus software in the world. However, the reasons for this error include:
Virus or malware infection – The error could signify that you have been compromised and need a deep scan from a good antivirus tool.
Incompatible program with Kaspersky Antivirus – If some third-party applications are incompatible with Kaspersky, you may expect this error.
Missing Dynamic Link Libraries (DLL) – DLLs are essential software components, and a lack of the appropriate DLL will trigger this error.
Installation issues – Incomplete installation of Kaspersky Antivirus software has been noticed to nbbe one of the core causes of the error.
Corrupt Kaspersky Antivirus exe file – Corrupt files will generally trigger errors on your computer, which is the case for Kaspersky.
Meanwhile, Windows Report has come up with solutions to fix avpui.exe application error on your Windows 10 PC.
How can I fix avpui.exe error?
1. Use third-party software for Windows issues
We recommend using a dedicated repair tool with features that aim to repair corrupt registry keys and the damage left by malware.
Solving these things manually would be a time-consuming task, and you might harm your data during the process. That’s why this alternative is preferred.
2. Run a full system scan
Firstly, type Windows Security in the Search bar, and click on the relevant search result.
Now, click on Virus & threat protection here.
Click on Scan options.
Lastly, select Full scan and click on the Scan now button at the bottom.
Note: If you are done scanning your PC, you should remove all detected viruses; the option may be clean or delete, depending on the antivirus you are using.
Viruses and malware can cause the avpui.exe application error. Run a full system scan on your PC to remove every possible virus corruption.
There are several third-parties antivirus software around that you may use; however, you can use Windows’ built-in antivirus, Windows Defender.
3. Use the SFC scan
Click the Start menu, type cmd and select the Run as Administrator option.
Here, type the script below and hit Enter. sfc /scannow
Finally, restart your Windows PC.
System File Check (SFC) scans; checks for system file integrity, and fix any corrupted files. This process can fix any corrupt system file associated with Kaspersky Antivirus program file and data.
Click the Start menu, type control panel, and select the app.
Select Uninstall a program.
Lastly, click on any program from the program list and select the Uninstall button.
Another way of fixing avpui.exe application errors is by uninstalling incompatible programs. Some Windows users reported that some general-purpose applications might cause avpui.exe application errors.
So, if you can identify the specific program responsible for the problem, you can easily uninstall it from Programs and Features.
5. Disable Kaspersky Antivirus from startup
Press Windows key and R key to launch the Run program, type msconfig, and hit Enter.
In the System Configuration window, click on the Startup tab, and select Open Task Manager.
Click Kaspersky on the list of programs and select Disable.
Finally, restart the PC.
Another method of fixing avpui.exe application startup error on Windows 10 is by disabling Kaspersky Antivirus from the startup menu.
6. Uninstall Kaspersky Antivirus
Click the Start menu, type control panel, and select the app.
Select Uninstall a program.
Lastly, click on Kaspersky Antivirus from the program list and select the Uninstall button.
One of the simplest ways of fixing avpui.exe application error problem is to uninstall Kaspersky Antivirus from your Windows PC.
In conclusion, the above methods can fix the avpui.exe application error problem on Windows 10 PCs.
Also note that some common problems you will solve with the solutions we discussed include: avpui.exe unknown hard errors, avpui.exe download errors, avpui.exe exception errors, as well as avpui.exe errors in Kaspersky.
Finally, share your experience after using any of the programs we mentioned. Feel free to comment below.
If your PC keeps freezing and restarting for no clear reason, you’re not alone. This guide covers the most common causes, from driver issues to overheating, and walks you through quick fixes to stabilize your system.
What to do if the computer freezes while restarting?
Plug in the USB, insert the CD/DVD and restart your PC.
Press F11 (F10 or F12) to open the Boot menu.
Select the MemTest86 bootable drive or disk and press any key to run it.
The scanning process will begin on its own.
After it’s done (and it can take some time), it should give you an insight into the state of your RAM.
Now check if the computer rebooting freezes have stopped.
Critical system errors have existed for ages, and troubleshooting hasn’t changed much. So, for example, if there’s no Blue Screen of Death and your PC is freezing or constant reboots plague it, hardware inspection is the first thing you should do.
Every component might affect this, but our primary concerns are RAM and HDD.
First, let’s start with the easier one, which is RAM. You can shut down your PC, unplug the power cable, and open the casing. Once you’re there, remove the RAM card from its slot (if you have multiple units, do it for everyone).
You can switch RAM cards in sequence or plug them into different unoccupied empty slots.
Moreover, you can unplug one by one RAM card and try running the PC that way. Furthermore, you can scan for RAM issues with a third-party tool called MemTest86.
If your RAM is fully functional, but the problem persists, move to additional steps.
Burn the Hiren’s BootCD ISO file to DVD or stack it onUSB.
Insert the USB or DVD and reboot your PC.
Press F12 to open the Boot menu and boot Hiren USB or DVD.
Now, once the Hiren BootCD loads, chooseDos programs.
Enter number 6 and press Enter to open Hard Disk Tools.
To select HDAT2 4.53, choose number 1 and press Enter.
Highlightyour partition on the list and press Enter.
SelectDevice Tests Menu.
Pick the Check and Repair bad sectors option.
After the scanning procedure finishes, remove the USB/DVD and restart your PC.
This is an excellent solution if the computer freezes and restarts to a black screen.
Even if we neglect that HDD is quite an expensive component, your data is more critical. Unfortunately, the HDD malfunction is too often the sole reason for freezing and unforeseen reboots.
The same goes for RAM, which applies to the hard drive regarding physical or software troubleshooting.
You can remove it and try it on another PC or use a third-party tool to scan for errors. However, before that, ensure the SATA cable is connected correctly.
The physical troubleshooting should be simple: shut down your PC, cut the power, open the casing, unplug the cables, and remove the HDD.
Then, insert it into any other PC and try booting from it. If everything works fine, you can loosen up.
If all these steps seem too advanced, we suggest you utilize an efficient PC repairing software solution to replace all corrupt files with healthy versions.
3. Check for overheating
Clean the PC case and use something like canned compressed air, don’t use a vacuum cleaner.
Remove and clean the CPU cooling fan thoroughly.
Replace a thermal paste, and do it carefully.
Add extra cooling fans.
In case you have a liquid cooling system, double-check the pump.
If you’re using a laptop, get a cooling pad or use something to elevate the computer above the surface; that way, the air can circulate freely, and the overheating should be subdued.
In addition, we can’t overlook overheating as a possible cause of the issue at hand. Typically, the PC will shut down to prevent CPU damage after extensive exposure to heat.
However, sometimes overheating can cause the PC to slow down or, as in this case, to fall into a boot loop, inflict unexpected crashes, or cause computer rebooting freezes.
Besides the sudden PSU failure, overheating is the easiest way to ruin your PC completely, so tracking temperature changes closely is highly advised.
You should be able to understand the current state by touch; however, for better insight, we advise you to use a third-party program like SpeedFan or HWMonitor.
If CPU temperature is above 75-80 degrees Celcius or higher when idle or above 90 when under stress, you should address it immediately to avoid fatal damage to your motherboard or CPU.
4. Double-check drivers
Power the system on and hit F8 (this function key may be different on your computer) while it is starting up.
Select Last Known Good Configuration (advanced).
If that falls short, return to Advanced startup options and select Safe Mode with Networking.
Launch the Device Manager.
Starting from the first element, expand it, right-click on the driver, and select Update driver. Make sure you do this for all drivers.
Select the Search automatically for drivers option.
Once you’re confident that all drivers are correctly installed, restart your PC and try booting Windows, and see if the computer rebooting freezes have stopped.
We have accounted for most of the physical hardware issues that might’ve been the reason for freezing and crashes. However, if you’ve moved past those, it’s a valid point that the software is why PCs are gradually underperforming.
Or, to make a precise point, some drivers are either not installed or incompatible with the current system version.
The first troubleshooting step regarding software is to access the Advanced startup options and start the system with the last known exemplary configuration.
You must press F8 upon booting to access the Advanced startup options menu. However, sometimes this won’t work due to the fast boot sequence.
In that case, physically restart your PC multiple times, and it should access the menu mentioned above on its own. Then, if you’re still stuck with the same freezing/boot loop routine, move on to the last two steps.
These tools are able to perform comprehensive scans and identify the right driver for your computer, and download them in just a few minutes.
5. Update BIOS
Besides drivers, there’s also BIOS or, rather, a motherboard firmware that can cause issues. This is somewhat of a cross-road between software and hardware.
Suppose issues emerged after you recently installed a new component supported by your motherboard or after you upgraded your OS. In that case, there’s a chance that you’ll need to update BIOS to make it compatible with the hardware and software changes.
Now, flashing BIOS is not a child’s game. But, on the other hand, you don’t have to be an extremely knowledgeable user to perform it. It’s mostly done from the Windows interface, but specific novel configurations offer BIOS updates through the BIOS utility.
Either way, make sure to check out this article for detailed insights. In addition, since the procedure can vary, the best advice is to google your motherboard and look for a detailed explanation.
Finally, if you’re 100% positive that the hardware is fully functional and that software is the one that created the problem, reinstallation is an obvious choice. But, unfortunately, that can take time and effort if you’re a Windows XP user.
Yet, if Windows 7, 10, or 11 are your cup of tea, the procedure is manageable and not a nerve-wracking experience. Detailed instructions on how to do it in a few easy steps are found in this article, so make sure to check them out.
Can RAM cause the PC to freeze?
Your computer’s daily operations employ a kind of memory called random access memory (RAM). Over time, cache problems and hidden system files might clog up your RAM, causing your PC to freeze when it transfers memory to your hard drives.
So this is a YES. The RAM can cause your PC to freeze.
With that, we can finally conclude this exhaustive but hopefully helpful article. We hope your computer rebooting freezes are now a thing of the past.
Sometimes, the mouse appears to have a will of its own and starts moving around erratically or clicks by itself. So, you might be asking yourself, why is my mouse clicking on its own?
Well, anything from dust and dirt to outdated drivers and faulty touchpads can cause it. In this piece, we’ll address all these and more to ensure you can use your mouse effectively.
How do I stop my mouse from clicking on its own?
1. Try a different port
Open the Settings app using the hotkeys Windows + I.
On the left pane, click Bluetooth & Devices, then on the right pane, select Mouse.
Now set Select your primary button to Right.
? If your mouse is connected to a USB 3.0 and doesn’t work correctly, maybe there’s a problem with the port. Check out this step-by-step guide to fix issues with the USB 3.0 port.
2. Update the mouse driver
Press Windows Key + X and choose Device Manager.
Click on Mice and other pointing devices to find your mouse driver.
Right-click to select the driver, click Update Driver,and follow the instructions on the screen.
These tools are quick and easy and will update and repair all your drivers in one go. In addition, they will automatically update the most recent driver available for your device in a matter of seconds.
Once your mouse driver is updated and working properly, you can explore simple automation to test mouse functionality or repetitive clicks. Learn the exact steps in this guide on how to use OP Auto Clicker.
3. Check for remote control software
Disconnect your computer from the network and the Internet.
Open the Start menu and type control panel, then click on Uninstall a program.
Check your installed programs to see if there are any unusual programs installed. For example, the presence of programs such as TeamViewer, Chrome Remote Desktop, or X2GO is suspicious.
Click on any of these programs if they exist, then select Uninstall.
Follow the wizard to complete the uninstallation.
Start the computer in safe mode and scan it for viruses.
If your mouse stops clicking randomly on the desktop, this could mean that some remote control software has taken over your computer.
4. Disable the touchpad
Press Windows Key + I to open the Settings app.
Once the Settings app opens, go to Devices & Bluetooth section, then on the right pane, select Touchpad.
Toggle off the Touchpad switch.
Check your laptop manual for detailed instructions if you can’t find the keyboard shortcut. Once you disable your touchpad, the issue with your mouse should be resolved.
Open the Settings app and navigate to Devices section.
Choose Mouse from the menu on the left and click on Additional mouse options.
Mouse Properties window will now appear. Make sure that the ClickLock feature isn’t enabled. If it is, uncheck Turn on ClickLock, and click Apply and OK to save the changes.
6. Disable the touchscreen
Press Windows Key + X and choose Device Manager.
Expand Human Interface Devices and locate your touchscreen on the list.
Right-click your touchscreen and choose Disable from the menu. If the confirmation dialog appears, click Yes.
What can I do if the mouse keeps clicking on its own Windows 11?
All the solutions listed in this article are valid once you have a clicking problem on your mouse in Windows 11.
However, once you are confident that the mouse is bad, we recommend you change it instantly, as repairs may be hard to effect, and you may need a technician in such cases.
Discord is one of the best chat apps for the gaming community. However, many users reported that they couldn’t uninstall it on their PC.
This is a minor problem, and it can be easily fixed. In today’s guide, we’ll show you how to deal with this issue in a matter of moments.
To make it more clear to you, let’s take a look at some reasons why this error occurs.
Where is Discord installed?
You can find the installed application by going to the following location inside your File Explorer. Make sure to replace the username with your actual username: C:Users%username%AppDataLocalDiscord
Why can’t I uninstall Discord?
Like any other program, Discord might run into several problems. Our today’s issue usually appears due to some JavaScript errors.
One of the most common ones is related to Discord’s process. Do not hesitate to check some valuable solutions if you notice a JavaScript error in the primary process.
When you cannot uninstall Discord, your app might remain on the computer at an unknown file location.
If you’re in the same boat, today’s solutions will help you to bypass this problem. Use the steps below, and you’ll not have to worry about this irritating problem again.
What happens if I uninstall Discord?
The app along with its data will be deleted from your computer.
If you try to delete Discord again, you’ll probably get a message that says the file is no longer in that location. Therefore, it couldn’t be appropriately deleted.
Let’s see what you can do if you can’t remove Discord from your PC. Follow along!
How do I completely uninstall Discord?
1. Disable Discord auto-run
If you cannot uninstall Discord from Windows 10, right-click on the taskbar and choose Task Manager.
From Task Manager, go to the Startup tab.
Right-click on Discord and select Disable.
2. Use the Windows Settings menu
Use the following keyboard shortcut to open the Settings app: Windows + I, then navigate to Apps.
Check if you can find Discord in this list.
If yes, click on it and select Uninstall. This is how to completely remove Discord from PC.
3. Delete the Discord cache
Use the following keyboard shortcut: Windows + R, then type%appdata% and click OK.
In the AppDataRoaming folder, right-click on the Discord folder, then select Delete.
Open the Run dialog box again, using the Windows + R keys.
Now, type %LocalAppData% and hit the Enter key.
Locate the Discord folder, then right-click on it, and select Delete.
Restart the computer and check again to see if the folders are created similarly.
Why can’t I delete Discord from Localappdata?
Most of the time, users will remove Discord, but the application will still be on the computer in an unidentified file location.
When users attempt to delete Discord once more, the PC responds by stating that the file is no longer at that place and that it cannot be erased.
With the above solutions, you can work around this situation and remove Discord from your computer altogether.
NOTE
In some cases, the error message u003cemu003eThe action can’t be completed because the folder or a file in it is open in another programu003c/emu003e might appear. To resolve this, open the u003cstrongu003eTask Manageru003c/strongu003e and close any related folders/files running concerning Discord.
4. Delete Discord from the registry
Hit the Windows key, type regedit, then open Registry Editor.
Now, follow this path: HKEY_CURRENT_USERSOFTWAREDiscord
Right-click on the Discord folder and selectDelete.
Restart the computer. The Discord uninstall not working issue will be gone. This is how to uninstall discord from Windows 10, 11, 7.
5. Try a dedicated software
You can use dedicated PC uninstalling tools if you still haven’t managed to remove Discord. There is plenty of software for this job.
We suggest using the IObit Uninstaller software to get rid of Discord or any other app. It is straightforward to use. Just select Discord from the app listing and click the Uninstall button.
Along with providing an easy way to remove apps by browsing around a listing of everything installed on your PC, IObit Uninstaller can ensure the app is gone for good.
Packed with cleaning features that can take care of your junk files, this tool will remove all unnecessary files that may have been left behind after you uninstall Discord.
You will not need the help of any other tool to complete a full uninstallation of Discord or any other stubborn application.
At the press of one button, all clutter will be deleted, and you’ll be able to enjoy your PC at its full potential.
IObit Uninstaller
Get rid of Discord and all associated files that can usually be left behind.
If you change your mind and want to get the Discord app back into your system, you don’t have to worry! The installation process is straightforward and takes only a few minutes.
The first thing to do is download Discord from the official site, then follow the on-screen instructions. Also, do not forget that you can also use the app’s web version.
This occurs whenever Discord has a problem that is located inside its code, or whenever its installation media is incomplete. This can happen through file corruption.
In order to fix this issue, you should follow the solutions we have listed above and then try to reinstall Discord once again.
Also, you should remember that the installation process might get into trouble. One of the most common is the Discord setup error: Failed to extract the installer. To fix it quickly, make sure you verify some efficient solutions.
Following the steps presented in this guide, you will succeed in uninstalling the Discord app for good.
It is rare to still have issues after doing everything in this article. However, if this is the case, it could be a problem with your Windows profile or Windows.
Whenever your printer has issues with the printing job that results in wrong color printing or incorrect page printing it mostly has to do with the ink cartridges.
The same ink cartridge can also cause the printer to only print half the page or to leave the middle of the page blank, as reported by the HP printer users in the Microsoft Community Answers.
I’m having a problem printing. Whenever I print a document, my computer will print either a blank page, a small portion, of a page, most of a page, or (sometimes) a full page. Then it will repeat the print job, indefinitely, until I cancel it, printing at random items 1, 2, 3, or 4 above. Also, when I view the print queue, the printer status flickers into offline mode, and the print job continuously resets, it appears.
Or, another variant of the printing issue is the following, mentioned in another thread:
Printing from the context menu of a jpg file in file explorer produces a broad empty white stripe down the center. Only from the context menu, so far as I can tell.
Why is my printer only printing half the page?
This issue is because of your printer settings like the page size and orientation. Other causes for this printing error are:
Your paper is not entirely blank
The cartridge is running low
It might be due to printer malfunctions or errors
Follow the steps listed in this article to fix the HP printer prints half pages issue.
What can I do if my printer is printing only half a page?
1. Uninstall recent updates
Open Settings and click on Update & Security.
Go to Windows Update and click the View update history button.
Click the Uninstall updates option.
Look for the problematic update, select it and click on Uninstall.
Choose Yes when prompted then restart your computer.
Oftentimes, Windows updates create problems with various features or apps. It is also the case with the printing process.
Within days, Microsoft also released update KB5001649 which was supposed to fix any kind of printing issues for all supported system versions.
It’s preferred to manually get the update from the Microsoft Catalog; look for the version corresponding to your system.
2. Check the printer configurations
This short but effective guide can certainly solve printing errors like half-page printing by only changing your printer settings, which can be the reason for this problem.
Type Printer&Scanners in the Start Menu.
2. Click on your printer device from the list.
3. Choose the Manage option.
4. Go to Printing preferences.
5. In the new window, choose the correct print settings.
3. Remove and reinstall Printer Driver
Press Windows Key + R to open Run.
Type Control and click OK.
In the Control Panel, go to Hardware and Sound > Printers and Devices.
Select the printer with a half-page printing problem and click on Printer server Properties option (at the top).
In the Printer Server Properties window click the Drivers tab.
Select your printer from the list of installed printers.
Click the Remove button and select Remove Driver Only.
Click OK to remove the Driver. Click Yes to confirm the action.
Restart the computer.
Now download the HP Printer setup software from the official website.
Run the Setup software and select Connect a new printer option.
Proceed with the on-screen instructions to install the printer.
Now print a test page and check if the printer is printing full pages.
If you require an easier method to manage all your drivers at once without any hassle, Outbyte Driver Updater automatic software will do the job.
It’s the go-to program when it comes to driver matters such as reinstalling official printer device drivers or fixing corrupted drivers on your PC.
Outbyte Driver Updater
Escape driver incompatibility or outdated driver issues by using this all-around automated tool.
Many files can be illegitimate on your computer, while some hide under the guise of executable files with the .exe file extension. The UA.exe application error results from these files running on your computer.
The UA.exe file is a legitimate component of the Verizon Wireless Software Utility Application for Android – Samsung program. It has the Windows .exe file extension. However, it can cause application errors, resulting in UA.exe.
Furthermore, you can run into the UA.exe System Error code:The code execution cannot proceed because C:\Windows.ol\Users\lapis\AppData\Roaming\VERIZON\UA_ar\mfc90.dll due to the interference of the UA.exe file.
Moreover, the UA.exe file is not an essential Windows file, so it doesn’t have any crucial Windows process it performs.
Why do I get the UA.exe application error?
The UA.exe application error may be due to numerous factors affecting the file or your system. Regardless of being an executable file, a UA.exe file can become malicious and cause issues with other .exe files not opening on your PC.
However, the factors liable for causing the error are:
Corrupt system file – When your system files are not intact, they can cause the UA.exe app error. They can interfere with legitimate files and programs, prompting errors.
Malware or virus attacks – When you have malware infection on your PC, it can impede its functionality, causing it to run into errors like the UA.exe application errors. It can also be a virus attack causing the error.
The causes of the problem may vary on different PCs. Nonetheless, you can fix the error by troubleshooting your PC.
How can I fix the UA.exe application error?
Do not hesitate to apply the following preliminary checks:
If you want to perform the SFC and DISM scan more effectively and faster, then we recommend you use a specialized repair tool to scan your computer and automatically replace the corrupt files with healthy ones.
2. Update Windows Operating System
Press Windows + I key to open the Windows Settings app.
Select Updates & Security.
Click on Windows Update and click on Check for updates. (If any updates are available, it will search for and install them)
Updating Windows OS will install the latest security features to protect your PC, fix bugs liable to cause the error, and update your drivers. Read about fixing Windows not connecting to update service if the error occurs on your PC.
Left-click the Start button, type Control Panel, then open it.
Click on Programs, then select Programs and Features.
Find the Verizon Wireless Software Utility Application for Android – Samsung, right-click on it, then select Uninstall from the drop-down.
Follow the onscreen instructions and restart your PC to check if the error persists.
Uninstalling the program responsible for the UA.exe file on your computer can fix the application error it’s causing.
4. Run an antivirus scan on your PC
You should run an antivirus scan on your PC because a virus might trigger the UA.exe application error. It will help detect any malicious or threatening viruses infecting your PC.
Windows 10 relies on processes and services in order to run properly, and even though processes are important, sometimes certain processes can cause problems. Users reported that wmiprvse.exe is causing problems for Windows 10 users, so let’s see how to fix those issues.
What is the WMI Provider Host (wmiprvse.exe process)?
Wmiprvse.exe is the process of the Windows Management Instrumentation Provider Service, which has the function of reporting important errors and monitoring other programs.
This process might be used by some other third-party applications to connect to Windows management and monitoring services. In most cases, disabling or stoping WMI processes or services can cause problems.
How do I fix problems with wmiprvse.exe on Windows 10?
1. Restart Windows Management Instrumentation service
Press Windows Key + R and enter services.msc.
When Services window opens, locate Windows Management Instrumentation service, right click it and choose Restart from the menu. If restart option isn’t available, simply stop the service and start it again by choosing the appropriate options.
After you’re done, close Services window and check if the issue is resolved.
According to users, you can fix problem with high CPU usage simply by restarting Windows Management Instrumentation Service.
Some users are suggesting to permanently disable this service, so you might want to try that as well. To disable Windows Management Instrumentation service permanently, do the following:
Locate Windows Management Instrumentation service and double click it to open its properties.
Set Startup type to Disabled and click Apply and OK to save changes.
2. Restart other services
As we already mentioned, you can fix this problem by restarting certain services, and in order to quickly restart the necessary services you can use command line tool. To restart these services, do the following:
Press Windows Key + X to open Power User Menu. Choose Command Prompt (Admin) from the menu.
When Command Prompt starts, run the following commands:
net stop iphlpsvc
net stop wscsvc
net stop Winmgmt
net start Winmgmt
net start wscsvc
net start iphlpsvc
After the commands are executed, restart your PC and check if the issue is resolved.
Go to the Services tab and look for the process that has the same ClientProcessID.
In our example that was 6976 and the related service was WMPNetworkSvc.
Stop the service by right clicking it and choosing Stop from the menu.
If the service is related to a third-party application, you can try removing that application from your PC. In addition, you can also try stopping this service from running by setting the Startup type to Disabled in the Services window.
Event Viewer is a powerful tool that allows you to view computer logs. Using this tool you can find which process is causing this problem, and to do that you need to follow the steps listed above.
Keep in mind that you’ll probably get a different ClientProcessID number, so be sure to use that number and not the one that we used in our example.
4. Check your PC for malware
Open Task Manager and go to the Details tab.
Locate the process that is related to Search Conduit and choose End Task option.
After that, go and uninstall the Search Conduit application.
Few users reported that malware can also cause this error to appear, so if you’re having this error we strongly suggest that you perform a scan and check your PC for malware. After removing the malware the issue with wmiprvse.exe should be fixed.
Users reported that malware called Search Conduit caused this issue, and to fix this problem you need to disable this application and remove it from your PC.
Many users reported that Search Conduit is the main culprit for this problem, and after removing the application, the issue was completely resolved.
5. Remove HP Wireless Assistant
According to users, HP Wireless Assistant can also cause this problem on Windows 10. Stopping the HP Wireless Assistant service fixes the issue, but we also recommend that you remove this software from your PC if you want to permanently fix this problem.
6. Stop certain services
Open Services window and locate VMWare USB, VMWare USB Arbitration Service and Hyper-V Virtual Machine Management services.
Be sure to disable all three services by right clicking each of them and choosing Disable from the menu.
Once all aforementioned services are disabled, restart Windows Management Instrumentation service and the problem should be fixed.
Users reported that VMWare USB, VMWare USB Arbitration Service and Hyper-V Virtual Machine Management services are related to wmiprvse.exe and that they can lead to high CPU usage. To fix this problem it’s recommended that you disable those services and restart winmgmt service.
7. Remove any unwanted programs
Unwanted applications can sometimes be installed to your PC and cause high CPU usage. Users reported that applications such as SaveSense, WebSteroids, PremierOpinion, and Relevant Knowledge can cause this issue to appear, so be sure to remove these applications from your PC.
Sometimes those applications will install their own updater and sync programs, so be sure to completely remove them from your PC. Many regular applications will sometimes install certain unnecessary software, so be sure to check your PC and remove any applications that you don’t recognize or remember installing.
8. Remove certain third-party applications
Sometimes regular applications aren’t fully compatible with Windows 10, and that can cause problems with wmiprvse.exe. Users reported problems with GoPro Studio, Beats Updater and Scipe.
To fix this problem, you can remove the problematic applications or end them in Task Manager. You might be able to fix this problem by updating the problematic applications or by using some of the older versions.
9. Perform SFC and DISM scan
Problems with wmiprvse.exe can occur if your Windows 10 installation is corrupted, and you can fix this problem by performing sfc and DISM scan. To do that, follow these steps:
Open Command Prompt as administrator.
When Command Prompt opens enter sfc /scannow and press Enter.
Wait for the process to finish.
After the sfc /scannow process ends, check if the problem is resolved. If the issue persists, enter DISM /Online /Cleanup-Image /RestoreHealth in Command Prompt and press Enter to run it.
10. Disable the spmgr service
According to users, spmgr service can sometimes cause this problem on your PC, so in order to fix it you need to disable the problematic service.
This service is in control of Asus PC Probe application, and to fix this problem you can disable spmgr service or simply uninstall Asus PC Probe application.
Problems with wmiprvse.exe are usually caused by certain services or third-party applications, but you can easily fix them by using one of our solutions.
Recently, we’ve seen even more people hop on the crypto mining craze with one end goal, earning some cash. To those unfamiliar with the phenomenon, it is the process of creating new bitcoins by solving complicated math problems verifying transactions in the currency.
And now, Microsoft has restricted crypto mining using Azure and all its online services, effective December 1. The company stated that the move was geared towards enhancing the security of its customers’ cloud accounts.
Microsoft quietly updated its Universal License Terms for Online Services citing the new ban on crypto currency mining. According to the new update, “Neither Customer, nor those that access an Online Service through Customer, may use an Online Service: to mine cryptocurrency without Microsoft’s prior written approval.”
The company further stated in one of its forums titled Important actions partners need to take to secure the partner ecosystem that:
The Acceptable Use Policy has been updated to explicitly prohibit mining for cryptocurrencies across all Microsoft Online Services unless written pre-approval is granted by Microsoft. We suggest seeking written pre-approval from Microsoft before using Microsoft Online Services for mining cryptocurrencies, regardless of the term of a subscription.
Talking to The Register, Microsoft highlighted that the move was geared towards enhancing security for its cloud services and that crypto currency mining can cause “disruption or even impairment to Online Services and its users and can often be linked to cyber fraud and abuse attacks such as unauthorized access to and use of customer resources”.
That said, you’ll now need Microsoft’s prior written approval to mine crypto currency using its online services, but there’s also a catch. The company will only give you approval for testing and research for security detections.
To get sound on your Windows 11 PC for music or meetings, you need an audio driver. Realtek HD Audio Driver is a popular option and comes with Realtek HD Audio Manager, which lets you adjust your sound with features like an equalizer and noise cancellation.
This guide will show you how to download an audio driver on Windows 11 and explain why Realtek HD Audio Manager is so common.
This is the most common and reliable option for Windows 11 users. It supports high-definition audio, works with most built-in sound cards, and usually comes preinstalled. If not, you can download the latest version directly from the Realtek official website or from your motherboard or laptop manufacturer’s support page.
Pros:
Great compatibility
Good audio quality
Regular updates
Cons:
Realtek Audio Manager can go missing after updates
2. Microsoft Generic Audio Driver
When other drivers fail, this built-in Windows driver steps in. It’s not fancy, but it’s stable and works on almost any system. You don’t need to download it separately, as Windows installs it automatically when no other suitable driver is found. It can also be installed through Device Manager. We’ll explain how in the guidelines below.
If your device came with a custom audio driver, it’s worth sticking to it. These drivers are tuned specifically for your hardware and may offer better stability or extra features compared to generic ones. You can find these drivers on your PC brand’s official support website, such as ASUS support, Dell support, or HP support.
Pros:
Optimized for your device
Can offer better performance or tools
Cons:
Updates may be infrequent
Harder to find on older devices
How can I download an audio driver on Windows 11?
1. Use Device Manager
Begin by right-clicking on the Start icon then tap on Device Manager.
Expand the Audio inputs and outputs section then right-click on the driver shown and click on Update driver.
Choose Search automatically for drivers.
Choose the Select for updated drivers on Windows Update option.
Go to Advanced options followed by Optional updates where you will find the audio driver ready for download. Tick the box next to it and select the Download & install button.
2. Use your device manufacturer’s website
Navigate to your motherboard manufacturer’s website. We will be using Lenovo as a showcase, thus if you also use Lenovo, head to Lenovo’s page and click on PC to find your computer model.
Click on the Drivers & software section after you enter your device’s model.
Type audio in the search bar and click on the result. Here you will be shown the audio driver that you need to download.
It is important that you only use the drivers offered by your manufacturer as the others won’t be compatible with your PC and will cause further problems.
The software will maintain your PC in top operational shape and make sure that you don’t encounter any driver-related errors along the way.
If you have manually downloaded the audio driver on Windows 11 and now you face issues with it, take a look at our guide on how to fix Realtek HD Audio Driver issues. However, if you have used Outbyte Driver Updater for this, you won’t be needing any further assistance as it will take care of everything.
Getting a HTML5 Video not properly encoded error message on your browser? You’re not alone.
The culprit behind this inconvenience is usually Adobe Flash Player, but there are a few other possible factors. Today, we tackle them all. Follow the step-by-step instructions below to get rid of this error.
How do I make my browser support HTML5?
1. Update your browser
Click the Menu button in the top right corner and select Help. Then select About Google Chrome.
Wait while Chrome checks for updates.
Once the updates are installed, restart your browser.
After updating the browser, check if Your browser doesn’t support HTML5 audio is still present.
2. Delete cookies and cache
Click on More icon, next select More tools. Lastly, click on Clear browsing data.
Make sure that All time is selected as the Time range.
Click on Clear data.
You can also get To view this video please enable JavaScript, and consider upgrading to a web browser that supports HTML5 video, but that can be fixed with a browser update.
3. Disable add-ons
Click the three dots icon in the top right corner.
Select More tools and choose Extensions.
Find the extension that you want to block.
Toggle off the extension.
4. Add plugins to support your browser
Press Windows key + S. Enter optional features and then select Manage optional features.
Search for windows media player.
Select it from the list and click on Install.
Issues such as these can occur if HTML5 video is not properly encoded, so installing the necessary components can help.
Keep in mind that there’s no option to download the supporting codecs of HTML5, but sometimes certain components need to be installed in order for it to work.
5. Modify the video link
Change watch?=v with embed/ in the link tab.
For example: https://www.youtube.com/watch?v= to https://www.youtube.com/embed/
By modifying the link, you might be able to fix problems with SSL HTML5 video, so be sure to try that.
6. Disable hardware acceleration
Open your browser settings.
Navigate to the Advanced section.
Find the System settings and toggle off the option for hardware acceleration.
We hope that our solutions have proven to be useful when it comes to fixing the Your browser does not support HTML5 video issues. Leave a comment in the section below if it worked for you.
Plenty of Windows Security users describe the following scenario: the Windows Security taskbar icon constantly shows a warning sign.
That sounds like a serious issue, especially with Windows Security actively protecting your device from the moment you start Windows 10, scanning for malware and identifying threats.
At a closer look, however, the app reveals no actual issues. Moreover, the notification has a rather strange behavior. Here’s what one concerned user asks:
Does double clicking the notification not work either?
How can I disable the Windows Security warning sign?
First of all, go to Virus & threat protection Settings.
Click Manage Settings.
While here, make sure that Cloud-delivered protection and Automatic sample submission are turned off.
Finally, you can return and click on Dismiss.
Windows 10 is meant to provide comprehensive, built-in protection, so users are worried. Some of them describe that the issue started after a fresh install, while others made nothing different at all.
This is frustrating since most of them naturally click anything with a notification/badge. If that’s your case as well, simply refer to the above steps to correct the issue right away.
Moreover, this could also be related to the Unknown origin filter that lets you know that you didn’t manually acknowledge some files a while ago.
Therefore, in the future, make sure to double-check your downloads. Getting a file without digital signature may have such repercussions at a later point.
Have you managed to remove the Windows Security warning sign? Let us know if the above tip worked for you too in the comments area below.
Approving iCloud from your PC has been a challenge faced by people using iOS devices with a Windows PC. It is because of the accessibility problem due to Apple’s security measures.
iCloud is a cloud base storage system designed by Apple that serves as a medium secure storage for its device users. It connects with an individual unique Apple ID that stores vital data from files, notes, photos, passwords, and other data.
As much as it is a storage system, it can serve as a platform for sharing information between family, friends, coworkers, etc., with the user deciding who can view its contents.
Furthermore, its data is encrypted and available across shared devices in real time. It is because it is a cloud-based storage and not a device. Also, iCloud comes with free 5GB user storage for all Apple users, which is expandable based on subscriptions.
Open the Microsoft store on your PC and search for the iCloud app.
Click on Get to download and install the iCloud app.
Wait for the app to install and run it on your PC.
Sign in to the iCloud app using your Apple ID, then enter the two-factor authentication code sent to your Apple device.
Select the iCloud features you want on your PC, then click apply.
To use the photos features, click the options button, enable iCloud photos, and share albums.
For Bookmarks features, select from the list of browsers on your PC that you want to use with iCloud. The selected browsers will sync with your PC and Apple device.
For Passwords sync on Windows, a dialogue box will prompt you to download an iCloud password extension for the browser and select Download to download the browser extension.
Your iCloud Windows App is now set and ready to use.
Downloading the iCloud app on a PC gives you easy access and enables real-time sync with photos, bookmarks, notes, and passwords. Check our guide on how to fix issues with iCloud not installing on Windows 11.
Update errors aren’t a novelty in the Windows OS history. Some of them are easy to resolve, while others are quite challenging.
Today we’ll try to address an error that goes by the code 0x8007001F. This error is closely related to audio drivers and prevents users from updating Windows 10.
There are a few possible workarounds applicable to this problem, so follow these steps, and hopefully, we can work it out.
What causes Windows Update error 0x8007001f?
Glitches cause upgrade error 0xc1900208 and similar ones with Windows Update, and usually, a built-in troubleshooter can fix those.
For example, upgrade error 0x80070714 can occur if your firewall or antivirus is blocking the update process, so we encourage you to check your security settings.
Update error 0x8007001F can prevent you from installing the latest updates, which can be a big problem. Speaking of update issues, here are some problems that users reported:
Windows failed to install the following update with error 0x8007001f – We couldn’t install this update but you can try again (0x8007001f)
Windows 10 update assistant error 0x8007001f
0x8007001f Windows 11, Windows 10, Windows 7
Windows 11 install error 0x8007001f
Windows update error 0x8007001f
0x8007001f – 0x20006, 0x3000d, 0x2000d
Game Pass error 0x8007001f
Without further ado, let’s just jump right in!
How do I fix error 0x8007001F 0x20006?
1. Use the Windows update troubleshooter
Click the Start button and select Settings.
Now choose Update & Security.
Click on Troubleshoot from the left pane, then select Additional troubleshooters from the right.
Click on Windows Update to expand it, then hit the Run the troubleshooter button.
The system will find any possible issue with the update and attempt to fix it. Just follow the additional steps to proceed.
2. Disable the antivirus
Hit the Start icon and click on Settings.
Select Update & Security.
From the menu on the left, select Windows Security and click on Open Windows Security in the right pane.
Select Virus & threat protection.
If you don’t have a third-party antivirus installed, choose Virus & threat protection settings and disable Windows Defender protection. If you do, click on the Open app, which will bring you to the menu of your antivirus.
Usually, the button to disable the antivirus is within its Security settings, but that may be different for every antivirus.
Although your antivirus will offer protection from malware, sometimes it can interfere with your system and cause a 0x8007001F error to appear.
We recommend changing your antivirus settings and disabling certain features to fix the problem. In the worst-case scenario, you might even have to remove your antivirus from your PC altogether.
Many users reported that both Norton and McAfee could cause this error to appear, so if you’re using one of these tools, be sure to remove them.
3. Uninstall the audio drivers
Click the Start button, type device manager, and select the results.
Navigate to the Sound, video, and game controllers section, right-click your audio device and select Uninstall device.
If available, check the Remove driver software for this device. Now click the Uninstall button to remove the driver.
According to users, sometimes, error 0x8007001F can appear on your PC due to your audio drivers. For example, you might encounter this issue if your audio drivers are outdated or corrupted.
After that, you should try to download the latest drivers for your audio device. Then, simply visit your motherboard or sound card manufacturer’s website and download the latest drivers.
Up next, check if the problem is resolved. To avoid permanent damage to your PC by downloading and installing the wrong driver versions, we strongly recommend using Outbyte Driver Updater.
This tool will automatically download all the outdated drivers on your PC and help you fix this issue with only a few clicks.
Outbyte Driver Updater
Keep your drivers up to date to avoid such errors with this amazing tool.
Press Windows key + R and enter services.msc, then press Enter or click OK.
In the Services list, search for Windows Update, right-click on it, and open Properties.
Now choose Disabled as Startup Type.
Save the changes and restart your PC; check if the service is still disabled after the reboot.
Press the Windows key + E to start File Explorer, navigate the path below and find the SoftwareDistribution folder. C:\Windows
Rename the folder to SoftwareDistribution.OLD (you can delete it, as well, but why take unnecessary risks).
Once again, start the Services app as shown in steps 1 and 2 and, in Properties, change the Startup Type from Disabled to Manual.
Go to Start and open Settings on the left side.
Open Update & Security and Check for updates.
Update service can be a culprit for various update issues. Additionally, it’s known for inflicting heavy CPU usage occasionally for no apparent reason.
Nevertheless, we will show you a possible workaround that can be used with most of the update errors. And the one we are currently addressing is not an exception.
Remember that you’ll need administrative access to change/delete system folders. This procedure proved as a good solution for multiple update errors. However, if the problem is persistent, move on to the next solution.
5. Perform SFC and DISM checks
5.1 Run a quick SFC scan
Click the Start button, type cmd, and select Run as administrator to start Command Prompt with full privileges.
When Command Prompt opens, type the following command and press Enter to run it: sfc /scannow
SFC scan will now start. This scan can take up to 15 minutes, so don’t interfere with it.
Sometimes error 0x8007001F can appear due to corrupted system files. If that’s the case, we recommend performing an SFC scan and repairing your files.
Once the SFC scan is finished, check if the problem is resolved.
The system update malfunctions are closely related to file corruption. In addition, some system files can get corrupted or quarantined due to malware infections.
For that reason, DISM (Deployment Image Servicing and Management) can be used to scan and resolve this issue by repairing broken files, so follow the steps below.
5.2 Run a DISM scan
Hit the Windows button, type cmd, then select Run as administrator from the results.
Type the following command and press Enter to run it: DISM.exe /Online /Cleanup-image /Restorehealth
The scanning will take a couple of minutes, so don’t interfere with the process.
6. Perform a clean boot
Press Windows key + R and enter msconfig, then press Enter or click OK.
Go to the Services tab, check Hide all Microsoft services, and click on the Disable all button.
Go to the Startup tab and click Open Task Manager.
Now, check if you have any programs you don’t want to run in the startup, right-click on them one by one and select Disable.
Go back to the System Configuration window and click Apply and OK to save the changes.
Restart your PC.
According to users, third-party applications sometimes interfere with your system, leading to this error. However, you might be able to fix the problem simply by performing a clean boot.
Once your PC restarts, all startup applications, and services will be disabled, ensuring that third-party applications don’t interfere with the upgrade process.
When the Settings app opens, navigate to the Accounts section.
In the left pane, select Family & other people and then click on Add someone else to this PC.
Now select I don’t have this person’s sign-in information.
Select Add a user without a Microsoft account.
Now enter the desired user name and click Next.
The issue might be a corrupted user account if you have problems updating due to error 0x8007001F. However, you might be able to circumvent this issue simply by creating a new user account.
After creating a new account, switch to it and check if the problem is resolved.
If the tools detect a new update, select Upgrade this PC now. If not, you will see the message Thank you for updating to the latest version of Windows 10.
Follow the instructions on the screen to complete the setup, and select the option to keep your files if you’re asked.
If you can’t install Windows updates due to error 0x8007001F, you might want to try performing an in-place upgrade. By doing that, you’ll force Windows 10 to update to the latest version.
Once the process is finished, you’ll have the latest version of Windows installed, and all your files and apps will be preserved.
How can I fix the update error 0x8007001F on Windows 11?
1. Windows Update Cache
Press hotkeys Windows + X, then select Terminal (Admin).
Type the script below and hit Enter. net stop wuauserv
Type C: and hit Enter.
Now type the script below and hit Enter. cd %Windir%\SoftwareDistribution
Finally, type the delete code below and hit Enter. del /f /s /q Download
Although Windows 11 has an updated interface and new features, it still inherits many problems from Windows 10, including the Windows Update error code 0x8007001F.
However, all the solutions presented in this guide can also be applied to the new OS without any problems.
The Installation Assistant will help you install a fresh copy of Windows 11
Of course, the process will also be slightly different because it’s not an updater tool, but it will help you install a fresh copy of Windows 11.
However, if you keep your files within the procedure, your data will be OK. But as an added security measure, it’s better to back up your files first.
That should wrap it up. Your error should have been resolved if you had followed these instructions closely. In case you have some questions or additional workarounds, please be sure to inform us in the comments section.
Also, for any suggestions or additional problems, feel free to use our comments section below, and we will come back with an answer as soon as possible.
In this guide, we will show you a few solutions that will help you resolve and overcome the Kindle Fire not showing in Windows PC issue. Let us get right into it.
How do I get my computer to recognize my Kindle?
1. Install the MTP USB Device Manager
Press Windows+ X to open the Start menu.
Select Device Manager.
Click on View and select Show hidden devices option.
Locate the Kindle Fire in Device Manager.
Right-click it and choose the Update Driver option.
Select Browse my computer for driver software.
Choose Let me pick from a list of available drivers on my computer
Select Portable Devices and click on Next.
Uncheck Show compatible hardware option and select MTP USB Device. Click on Next to install the driver.
If a certain device isn’t detected in Windows, it’s most likely that the problem is a missing driver. This issue can occur with smartphones and tablets, and it can easily affect Kindle Fire as well.
To fix the problem, you need to install the missing driver manually.
After installing the MTP driver, your PC will recognize your Kindle Fire and you’ll be able to transfer files without any problems.
Keep in mind that you might have to try different drivers in some cases in order to resolve this problem.
Update drivers automatically
By installing a driver manually you can damage your system when downloading the wrong version. We recommend using professional third-party software that downloads and installs the most suitable drivers.
So you can rely on third-party software Fortect Driver Updater due to its capability to scan your computer fast and detect automatically driver issues in your system.
If your Kindle Fire isn’t recognized by Windows 10, it might be due to your Kindle app. Your tablet uses the Kindle app for file transfer, and if this application is outdated you might experience certain issues.
Even if you have the latest version of Kindle on your PC, be sure to reinstall it and check if that solves the problem.
3. Set your device to connect as a camera
According to users, you can circumvent this problem by connecting your Kindle Fire as a camera. To do that, simply choose to connect your device as a camera from the pull-down menu after connecting Kindle to the PC.
If you can’t find this option in the pull-down menu, you can select it by going to the Settings > Storage section on your tablet.
Other users claim that you can fix the problem by connecting your Kindle Fire as an MTP or USB device. This option is also available from the Storage section or from the pull-down menu, so be sure to try it out.
Keep in mind that you might have to switch between different options several times before Windows can recognize your device.
This is a relatively common problem with Android devices on Windows, however, this isn’t a permanent solution, so you’ll most likely have to repeat it if the problem occurs again.
4. Transfer your files over a Wi-Fi network
Sending files to Kindle on Android
If your PC doesn’t recognize Kindle Fire, you might be able to fix the problem by transferring your files over Wi-Fi. To do that, you need to use Amazon Cloud Drive and File Manager.
Other useful applications that can help you with this problem are Send to Kindle and Wi-Fi Explorer, so you might want to try them as well.
With these apps, you should be able to transfer files to Kindle over your Wi-Fi network. We have to mention that this is just a workaround, but it might be useful if you need to urgently transfer a couple of files.
Keep in mind that the Wi-Fi connection is slower than USB, so it might take you a while to transfer larger files.
5. Try a different cable
If your Kindle Fire is not showing up on Windows, it might be due to your cable. Sometimes your cable might stop working due to damage or some other reason, and if that’s the case you should replace it.
After changing your cable, check if Windows recognizes your Kindle. According to users, they had to try several different USB cables before they found the one that works for them. Some users are also suggesting using a non-Amazon cable, so be sure to try that.
This solution works in most cases, but it might take a bit of trial and error before you find the cable that works for your device.
6. Connect your Kindle to the PC and restart it
According to users, you might be able to fix this problem simply by connecting Kindle with your PC and restarting it a few times. To do that, follow these steps:
Connect Kindle with the PC.
While Kindle is connected, restart it.
If everything is in order, you’ll hear a connection sound. If not, repeat the previous steps a couple of times until you hear the connection sound.
After hearing the connection sound, enter your PIN code on the Kindle. You might get a message mentioning a low-capacity charger. If so, just ignore the message.
Now go to This PC and you should be able to find Fire drive next to My Pictures or My Music.
According to users, Kindle is recognized by their PC only if it’s charging at low capacity. There’s probably a bug causing this issue, but it should be fixed in one of the future updates.
7. Turn off both devices and use Calibre to transfer files
According to users, you might be able to circumvent this problem simply by using Calibre to transfer your files. To do that, do the following:
Turn off your PC and Kindle and disconnect all cables.
Turn your PC back on again.
Now open Calibre and connect the Kindle to the PC.
Turn on the Kindle.
After doing that, the PC should recognize your device and you’ll be able to transfer files without any problems.
8. Connect your device to a different USB port
Many users reported that their Kindle wasn’t recognized when connected to a USB 3.0 port. USB 3.0 standard is relatively new, and some older devices might not have the necessary capabilities to work with it.
If you’re using a USB 3.0 port, try to connect Kindle to the USB 2.0 port instead. Several users reported that using the USB 2.0 port fixed the problem for them, so be sure to try it out.
On the other hand, several users reported that their Kindle was recognized only while connected to a USB 3.0 port.
We have to mention that this solution isn’t always successful, so you might have to repeat it a couple of times before your device is recognized by Windows.
This isn’t a permanent solution so you’ll have to repeat it if the problem reappears.
9. Perform a hard reset
Double swipe down from the top of your screen to find Quick Settings.
Tap on Settings.
Select the Device Option.
Tap Reset to Factory Defaults.
It’s possible to perform a factory reset of your device in a simple way that will also wipe all your memory data.
Then if other solutions didn’t work out, you can change your focus on your Kindle device and try a system recovery. Using this option, the device may address software troubles responsible for not recognizing your Windows PC.
To do that, press and hold the Power button for about 40 seconds until your Kindle restarts automatically. If your device already restarted automatically, release the power button, and if it didn’t restart you can turn it back on.
You can launch the recovery mode with the Power button and Volume Down button press and hold at the same time.
10. Reinstall your Kindle driver
Make sure your Kindle is connected to the PC.
Now navigate to Device Manager.
Locate Kindle on the list, right-click it and choose Uninstall device.
A warning message will appear. Click on Uninstall to remove the driver.
After removing the driver, disconnect the USB cable and reconnect it again.
Windows will now install the necessary drivers.
After reinstalling the Kindle driver, any problems with Kindle Fire should be fixed.
Sometimes a certain glitch with drivers can cause your device to be unrecognized by Windows 10. However, you can easily fix this problem simply by reinstalling your drivers.
In addition to the Kindle driver, some users are suggesting reinstalling USB Mass Storage Device.
This device is located in the Universal Serial Bus controllers section, but before you can find it you need to reveal hidden devices.
After you remove the driver, you need to disconnect the Kindle and restart both your PC and Kindle. Once both devices restart, connect them and your Kindle will be recognized.
11. Send the file as an email attachment
This is just a workaround, but it can be useful if you need to urgently transfer a few files. According to users, you can send the necessary files to your Kindle as an email attachment in order to circumvent this problem.
This is a simple workaround that might be helpful, but it’s not suitable if you need to transfer larger files.
12. Enter your Kindle PIN code
Many users use PIN codes to protect their devices from unauthorized access. However, sometimes your PIN can cause Kindle to become unrecognized by the PC.
To avoid this problem, be sure to enter your PIN code once you connect Kindle to the PC. After doing that, the device will be recognized and you’ll be able to transfer files without any problems.
13. Try turning your PC on and off while Kindle is connected
Another way to fix this problem is to simply connect the Kindle to the PC and then turn the PC off. After your computer turns off, wait for a few seconds and turn it back on again.
Once your PC turns on, your Kindle should be recognized. This isn’t the most reliable solution, so you might have to repeat it a few times before Windows detects your Kindle.
14. Run the wpdmtp.inf file
Open File Explorer and go to the C:\WindowsINF directory.
Locate wpdmtp.inf.
Right-click it and choose Install from the menu.
After the installation, you should be able to use Kindle with your PC without any problems.
15. Update Kindle firmware
According to users, you might be able to solve this problem by updating Kindle firmware. Firmware update often fixes compatibility issues, and if your Kindle isn’t recognized by Windows 10, a firmware update might fix that.
We have to warn you that firmware update is an advanced procedure, and if you don’t update your firmware properly or if you install a wrong update, you can cause irreversible damage to your Kindle.
If you decide to update your firmware be extra cautious and keep in mind that you’re updating it at your own risk.
16. Enable ADB on your Kindle
Open Settings.
Select Device.
Toggle on the Enable ADB option.
On the other hand, some users claim that ADB is the problem, so if you’re using it, try turning it off and check if that solves the problem. After doing that, your PC should be able to recognize Kindle without any problems.
17. Use a USB hub
According to users, you might be able to circumvent this problem simply by using a USB hub. USB hubs are useful if you have multiple USB devices but not enough ports on your PC.
Few users claim that using the USB hub to connect their Kindle to the PC fixes the problem, so you might want to try that as a workaround.
18. Leave your Kindle connected for a few minutes
A couple of users reported they fixed the problem simply by leaving their Kindle connected to the PC.
According to them, the device wasn’t originally recognized, but after leaving it connected for a couple of minutes Windows managed to recognize it.
This is an unusual solution, but you still might want to try it out.
19. Check if your device is on the ignore list in Calibre
According to users, in some cases, your device might be on the ignore list in Calibre and that can prevent Windows from recognizing it.
To fix the problem, you need to open Calibre and check if your Kindle is on the ignore list. If so, be sure to remove it and the problem should be resolved.
Why isn’t my Kindle showing up on my PC?
Here are a few common reasons why Kindle may not show up on your PC.
Your USB cable is damaged
There is a problem with your Kindle firmware
You haven’t installed the latest Kindle update
Your PC isn’t recognizing Kindle as an MTP device
There might be some important files missing
USB controller driver files might be missing
ADB isn’t enabled on your Kindle
Kindle charging but not recognized PC
Is the Amazon Fire tablet compatible with Windows 10?
The Amazon Fire tablet is recognized by Windows 10, as it is one of the supported operating systems you can connect the tablet to.
However, if you want to know if your Amazon Fire tablet can use the Windows 10 OS, then this is impossible. This is because the tablet uses an Android OS with no driver chipset supply that can run Windows 10.
How can I fix Kindle Fire if it’s not showing up on Windows 11?
If you are using a Windows 11 PC and Kindle Fire isn’t showing up on it, then you can try the above solutions as they work well on a Windows 11 PC as well.
Find the books and save them to your local disk. The files will be stored in a special download folder.
Kindle Fire is a great device, but as you can see certain issues with it can occur on Windows 10. If your device isn’t recognized on a Windows 10 PC, be sure to try any of the solutions from this article.
Turning off background apps in Windows 11 can help speed up your system, save battery life, and reduce unnecessary data usage.
You can do this through Settings or Group Policy, depending on what version of Windows you’re using. Follow the steps below to disable background apps within minutes.
How do I stop apps from running in the background Windows 11?
1. Use the Apps settings
Unwanted apps can be easily prevented from running in the background on your device through the Apps Settings. In the apps list, you will be able to view and configure settings for all the apps that have permission to run in the background.
1. Hit the Windows key, then open theSettings menu.
2. Click on Apps, then on Apps & features.
3. Search for the app you want to disable.
4. Click on the three horizontal dots next to the app, and select Advanced options.
5. Navigate to the Backgrouns apps permissions section.
6. Under Let this app run in the background, choose the Never option.
7. Repeat the same steps for each background app you need to disable.
If you want to disable all background apps in Windows 11, it can be done on your device through the Apps Settings. In the apps list, you will be able to view and configure settings for all the apps that have permission to run in the background.
Note that some apps are important to keep, like the weather app, to get timely info or the Alarms & Clock app, which helps you to receive important event reminders, and others.
2. Try the help of Battery Settings
Press simultaneously on Windows + I to open the Settings menu, go to System, then click on Power & battery.
Click on the Battery usage section.
Under the Battery usage per app section, search for the needed background app, click on the ellipsis next to it, and then select Manage background activity.
You’ll be redirected to the Apps & features page. There, under the Background apps permissions section, choose again the Never option.
Keep in mind that this option will work only if your PC has a battery. For example, it wouldn’t be available if you’re running Windows 11 on a VM machine.
3. Navigate to Task Manager
Press Ctrl + Shift + Del to open the Task Manager, and then go to the Startup tab.
Search for the app you want to turn off, click on it, then press the Disable button.
With Task Manager, you can disable only traditional desktop programs from running in the background. You can also improve system performance by closing active programs, and this guide on how to close running apps helps you clear processes that stay active on Windows 11.
4. Use Local Group Policy Editor
Press Windows + R to open the Run command, type gpedit.msc, then click on OK.
Expand the Computer Configuration section, then the Administrative Templates section.
Open the Windows Components section.
There, click on App Privacy, then look at the right window side and double-click on Let Windows apps run in the background.
Checkmark the Disabled option.
Click on Apply, then on OK.
This option will only be successful if you’re signed in as an administrator. You can easily disable background apps in Windows 11 using Registry and helps programs use the computer’s resources.
5. Disable background apps in Windows 11 via Registry
Press Windows Key + R and enter regedit. Press Enter or click OK to open the Registry Editor.
Navigate to the following key then check if you have AppPrivacy under Windows. If not, you’ll have to create one: HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows
Right-click on Windows then choose New followed by Key and name it AppPrivacy.
Next, right-click the AppPrivacy key then choose New followed by DWORD and name it LetAppsRunInBackground.
Right-click the LetAppsRunInBackground value and select Modify. Set the Value data to 2 then save the changes made and reboot your PC.
How do I enable background Apps?
If you suddenly change your mind and want to bring back your background apps in Windows 11, note that you can do it with ease. To perform this action, the Settings menu or Registry Editor would also be essential supports.
If the Microsoft Store is missing in Apps and Features, you are probably stuck trying to update or download anything safely. That can be a real pain, especially if you are on Windows 10 or 11 and depend on the Store for apps, Xbox, Game Pass, or even basics like Calculator.
This usually happens after system tweaks, cleanup tools, or when using custom versions of Windows. Let’s break down why the Store disappears and how to get it back..
How do I get the Microsoft Store back in Windows 10 and 11?
Press Windows + R to open Run, paste the following command in the text field, and hit Enter:wsreset.exe
Wait for the reset process to complete.
Once done, restart the computer, and Microsoft Store should reappear.
One of the most common troubleshooting methods, when something goes awry with the Store, is to reset the cache. This helped a lot of users, and we recommend you give it a try.
2. Get Microsoft Store via the Xbox app
Launch the Xbox app on your PC. If it’s not available, download the Xbox app from the official website, and complete the installation.
Once in the Xbox app, it would show This app needs an extra component. Microsoft Store is needed for account management. Click on the Install option next to it.
Wait for Microsoft Store to install, though it shouldn’t take long.
That’s it! Since the Xbox app is dependent on Microsoft Store, it serves as an effective way to install the latter when it’s missing. And the best part, you can directly download the Xbox app from the official website.
3. Reinstall Microsoft Store
Type Windows PowerShell in the Search bar and click on Run as Administrator.
Click Yes in the UAC prompt if it appears.
Paste the following command in PowerShell and press Enter: Get-AppxPackage -allusers Microsoft.WindowsStore | Foreach {Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)AppXManifest.xml”}
Once the process is complete and Microsoft Store is reinstalled, restart your PC.
If Microsoft Store is missing from Apps and features in Settings, it’s likely that either the program doesn’t exist anymore or has run into a significant issue. In this case, reinstalling it would do the job.
4. Run DISM
Type Command Prompt in the Search bar, and click on Run as Administrator.
Click Yes in the UAC prompt.
Now, paste the following command one by one and press Enter after each: DISM /online /Cleanup-Image /ScanHealthDISM /Online /Cleanup-Image /RestoreHealth
Please wait until the procedure ends (it might take up to 10 minutes).
Once done, run the SFC scan by executing this command:sfc /scannow
Finally, restart your PC.
Even though this is a long shot, your problem can relate to missing or corrupted system files. And in this case, running DISM(Deployment Image Servicing and Management) and the SFC (System File Checker) scan should do the trick.
5. Uninstall Windows Update
Press Windows + I to open Settings, and then click on Update & Security.
Click on View update history.
Now, click on Uninstall updates at the top.
Choose the update that was installed just before Microsoft Store went missing, and click on Uninstall.
Click Yes in the confirmation prompt.
Many users fixed things by uninstalling the update that triggered Microsoft Store to go missing. Go with this only if a patch for the bug hasn’t been released yet.
Once it’s downloaded, double-click on the file and then click Open in the prompt.
Now, launch the setup.exe file.
Click Yes in the UAC prompt.
Click on Next.
Now, click Accept to agree to the license terms for the latest iteration.
Once the setup is ready, click on Install to perform an in-place upgrade. Just make sure that it reads Keep personal files and apps.
If none of the solutions so far worked, performing an in-place upgrade would fix things when Microsoft Store is missing, along with a bunch of other issues. And you wouldn’t lose any files or apps on the computer.
How can I check if my Windows version supports the Microsoft Store?
Some versions like Windows LTSC or Education do not include the Microsoft Store by default. You can check your Windows edition by going to Settings > System > About and looking under “Windows specifications.
Can running cleanup tools cause the Microsoft Store to disappear?
Yes. Some cleanup or third-party tools can uninstall or disable built-in apps, including the Microsoft Store, especially if configured for aggressive cleaning or privacy settings.
What should I do if the Microsoft Store is missing after a Windows update?
First, restart your PC to see if the Store returns. If it doesn’t, check for pending Windows updates and install them, as missing updates can cause the Store to temporarily disappear.
Is there a way to restore the Microsoft Store if it’s been accidentally uninstalled?
Yes. You can use PowerShell commands to reinstall the Microsoft Store or perform a system restore to a point before it disappeared. If you are not comfortable with this, seeking professional help might be a safer option.
Why can’t I find the Microsoft Store app in my user account but it shows up elsewhere?
A corrupted user profile can prevent the Store from showing up. Try creating a new user account to see if the Store appears there, which can help isolate the problem.
Intel System Usage Report’s high CPU usage on their PCs, affecting their performance. It uses too much processing power, leading to other apps, programs, and processes working poorly.
Today, we’ll show you how to fix this problem and help you understand why it happens so you can prevent it from happening in the future.
How do I fix Intel System Usage Report using a high CPU?
Before proceeding with any fixes for the problem, go through the following:
Press Windows + R key to open the Run dialog box, type msconfig, and click OK.
Navigate to the Services tab and check the box for the Hide all Microsoft services option, then click the Disable all button.
Navigate to the Startup tab and click Open Task Manager.
Click on the startup programs and tap the Disable button.
Restart your PC and check if the high CPU usage persists.
Performing a clean boot will stop third-party apps from launching from the start. It prevents any startup process that can cause interference with the Intel System Usage Report processes.
2. Disable the Intel System Usage Report
Press Windows + R key to open the Run dialog box, type services.msc, and click OK to open the Windows Services manager.
Navigate through the list of services and select the Intel System Usage Report. Right-click on it, and select Properties from the drop-down.
Then change the Startup type to Disabled.
Disabling the Intel System Usage Report service can stop its activities and prevent it from using your CPU or memory space.
If you want to easily uninstall any app, then the IObit Uninstaller software can help you by uninstalling any unwanted or stubborn programs along with their associated files for a fast and light PC performance.
IObit Uninstaller
Get rid of all unwanted apps and leftovers to keep your PC clean and healthy.
Disabling Intel System Usage Report on your PC can help get around its CPU and cause high RAM usage. It is safe to disable it as the process has nothing to do with your PC’s performance. The SurSvc.exe file is in a subdirectory of C:\Program Files on your PC.
![Upgrade Windows 7 To Windows 10 Free 2026 [Accesibility Upgrade]](https://windowsreport.com/wp-content/uploads/2021/04/windows-10-1.jpg)
![Best Ethernet Splitter [Reviews & Buying Guides]](https://windowsreport.com/wp-content/uploads/2020/11/ethernet-splitter.jpg)
![How to Fix Excel Break Links is Not Working? [Simple Guide]](https://windowsreport.com/wp-content/uploads/2020/02/The-Excel-image-1.jpg)
![How to Stop the Mouse From Clicking By Itself [6 Ways]](https://windowsreport.com/wp-content/uploads/2021/11/touchpad.png)
![How to Uninstall Discord Completely [5 Easy Ways]](https://windowsreport.com/wp-content/uploads/2020/04/Discord.jpg)
![How to Approve iPhone on iCloud From PC [2 Ways]](https://windowsreport.com/wp-content/uploads/2022/12/Untitled-design-26.jpg)
![How to Fix Kindle Fire not Showing up on PC [Full Guide]](https://windowsreport.com/wp-content/uploads/2017/08/Kindle.jpg)
![How to Fix Intel System Usage Report High CPU [Step-by-Step]](https://windowsreport.com/wp-content/uploads/2022/12/Untitled-design-25.jpg)
